MIBs Depot

HUAWEI-SNA-DLSW-MIB

Registered at
1.3.6.1.4.1.2011.2.34
Last updated
2004-10-30 15:51
Organization
Huawei-3com Technologies co.,Ltd.
Namespace
huawei
Source file
HUAWEI-SNA-DLSW-MIB
Digest
sha256:bb3af5302122ffa53e59e7ad1cd0a4b1df837ea9056b37ee2cf622bd3840cd68

Description

private mib for dlsw

Contact

Platform Team Beijing Institute Huawei-3com Tech, Inc. Http://www.huawei-3com.com E-mail:support@huawei-3com.com

Imports

FromSymbols
HUAWEI-3COM-OID-MIBproducts
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowPointer, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-3COM-OID-MIB
HUAWEI-SNA-DLSW-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CreateLineFlag
type
DlcType
TEXTUAL-CONVENTION
Representing the type of DLC of an end station, if applicable.
current
EndStationLocation
TEXTUAL-CONVENTION
Representing the location of an end station related to the managed DLSw node.
current
EntryStatus
type
LFSize
TEXTUAL-CONVENTION
The largest size of the INFO field (including DLC header, not including any MAC-level or framing octets). 64 valid values as defined by the IEEE 802.1D Addendum are acceptable.
current
MacAddressNC
TEXTUAL-CONVENTION
Represents an 802 MAC address represented in non-canonical format. That is, the most significant bit will be transmitted first. If this information is not available, the value is a zero length string.
current

Objects

NameOIDSyntaxAccessStatus
dlswNode
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.1
dlswNodeVersion
OBJECT-TYPE
This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard Version number of this DLSw, and the second is a hexadecimal value representing the DLSw standard Release number. This information is reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.2011.2.34.1.1OCTET STRING (SIZE(2))read-onlycurrent
dlswNodeVendorID
OBJECT-TYPE
The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
1.3.6.1.4.1.2011.2.34.1.2OCTET STRING (SIZE(3))read-onlycurrent
dlswNodeVersionString
OBJECT-TYPE
This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages.
1.3.6.1.4.1.2011.2.34.1.3DisplayStringread-onlycurrent
dlswNodeStdPacingSupport
OBJECT-TYPE
Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) means the node has no support for the standard circuit pacing flows; it may use RFC 1434+ methods only, or a proprietary flow control scheme. (2) means the node supports the standard scheme and can vary the window sizes it grants as a data receiver. (3) means the node supports the standard scheme but never varies its receive window size.
1.3.6.1.4.1.2011.2.34.1.4INTEGER {none(1), adaptiveRcvWindow(2), fixedRcvWindow(3), unknown(65535)}read-onlycurrent
dlswNodeStatus
OBJECT-TYPE
The status of the DLSw part of the system.
1.3.6.1.4.1.2011.2.34.1.5INTEGER {active(1), inactive(2)}read-writecurrent
dlswNodeVirtualSegmentLFSize
OBJECT-TYPE
The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This object can represent any box- level frame size forwarding restriction (e.g., from the use of fixed-size buffers). Some DLSw implementations will have no such restriction. This value will affect the LF size of circuits during circuit creation. The LF size of an existing circuit can be found in the RIF (Routing Information Field).
1.3.6.1.4.1.2011.2.34.1.6LFSizeread-writecurrent
dlswNodeLocalAddr
OBJECT-TYPE
Local peer ip address.
1.3.6.1.4.1.2011.2.34.1.7IpAddressread-writecurrent
dlswNodePriority
OBJECT-TYPE
The priority value of local peer. 65535 expresses the value is unknown
1.3.6.1.4.1.2011.2.34.1.8INTEGER (1..5 | 65535)read-writecurrent
dlswNodeInitWindow
OBJECT-TYPE
The vlaue of init-window. 65535 expresses the value is unknown
1.3.6.1.4.1.2011.2.34.1.9INTEGER (1..2000 | 65535)read-writecurrent
dlswNodeKeepAlive
OBJECT-TYPE
The vlaue of keepalive interval. 65535 expresses the value is unknown
1.3.6.1.4.1.2011.2.34.1.10INTEGER (1..2000 | 65535)read-writecurrent
dlswNodeMaxWindow
OBJECT-TYPE
The value of max-window. 65535 expresses the value is unknown
1.3.6.1.4.1.2011.2.34.1.11INTEGER (1..2000 | 65535)read-writecurrent
dlswNodePermitDynamic
OBJECT-TYPE
To accept connections from non-configured remote peers when permit-dynamic is setted.
1.3.6.1.4.1.2011.2.34.1.12INTEGER {permit-dynamic(1), forbid-dynamic(2), unknown(65535)}read-writecurrent
dlswNodeConnTimeout
OBJECT-TYPE
Define connected state timer(The unit is a thousandth of a second).
1.3.6.1.4.1.2011.2.34.1.13INTEGER (1..65535)read-writecurrent
dlswNodeLocalPendTimeout
OBJECT-TYPE
Define connected state timer(The unit is a thousandth of a second).
1.3.6.1.4.1.2011.2.34.1.14INTEGER (1..65535)read-writecurrent
dlswNodeRemotePendTimeout
OBJECT-TYPE
Define connected state timer(The unit is a thousandth of a second).
1.3.6.1.4.1.2011.2.34.1.15INTEGER (1..65535)read-writecurrent
dlswNodeSnaCacheTimeout
OBJECT-TYPE
Define connected state timer(The unit is a thousandth of a second).
1.3.6.1.4.1.2011.2.34.1.16INTEGER (1..65535)read-writecurrent
dlswTrapControl
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.1.20
dlswTrapCntlState
OBJECT-TYPE
It is used to indicate whether the DLSw is permitted to emit traps.
1.3.6.1.4.1.2011.2.34.1.20.1INTEGER {enabled(1), disabled(2)}read-writecurrent
dlswTConn
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.2
dlswRemotePeerTable
OBJECT-TYPE
A list of tcp transport connections.
1.3.6.1.4.1.2011.2.34.2.1not-accessiblecurrent
dlswRemotePeerEntry
OBJECT-TYPE
A list of remote peer information
1.3.6.1.4.1.2011.2.34.2.1.1not-accessiblecurrent
dlswRemotePeerAddr
OBJECT-TYPE
The remote peer address for this transport connection.
1.3.6.1.4.1.2011.2.34.2.1.1.1IpAddressread-onlycurrent
dlswRemotePeerVersion
OBJECT-TYPE
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a dlswTConnOperState of `connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.2011.2.34.2.1.1.2OCTET STRING (SIZE(2))read-onlycurrent
dlswRemotePeerVendorID
OBJECT-TYPE
This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.2011.2.34.2.1.1.3OCTET STRING (SIZE(3))read-onlycurrent
dlswRemotePeerPaceWindInit
OBJECT-TYPE
The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A value of zero is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.2011.2.34.2.1.1.4INTEGERread-onlycurrent
dlswRemotePeerVersionString
OBJECT-TYPE
This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, if one is never received, or if one is received but it does not contain a version string. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
1.3.6.1.4.1.2011.2.34.2.1.1.5DisplayStringread-onlycurrent
dlswRemotePeerIsConfig
OBJECT-TYPE
The current remote peer is configrured when the value is 'yes'.
1.3.6.1.4.1.2011.2.34.2.1.1.6INTEGER {yes(1), no(2)}read-onlycurrent
dlswRemotePeerCost
OBJECT-TYPE
The cost for remote peer.
1.3.6.1.4.1.2011.2.34.2.1.1.7INTEGER (1..5)read-writecurrent
dlswRemotePeerKeepAlive
OBJECT-TYPE
The keepalive interval value.
1.3.6.1.4.1.2011.2.34.2.1.1.8INTEGER (1..60000)read-writecurrent
dlswRemotePeerLf
OBJECT-TYPE
The the largest frame size.
1.3.6.1.4.1.2011.2.34.2.1.1.9LFSizeread-writecurrent
dlswRemotePeerTcpQueneMax
OBJECT-TYPE
The max tcp queue value.
1.3.6.1.4.1.2011.2.34.2.1.1.10INTEGER (50..2000)read-writecurrent
dlswRemotePeerHaveBackup
OBJECT-TYPE
There is another remote peer whitch is configrued as the backup of the current remote peer .
1.3.6.1.4.1.2011.2.34.2.1.1.11INTEGER {yes(1), no(2)}read-onlycurrent
dlswRemotePeerIsBackup
OBJECT-TYPE
The current remote peer is configrued as the backup of another configured remote peer .
1.3.6.1.4.1.2011.2.34.2.1.1.12INTEGER {yes(1), no(2)}read-onlycurrent
dlswRemotePeerBackupAddr
OBJECT-TYPE
It is the IP ADDRESS of an configured remote peer of whitch the current remote peer is configrued as the backup
1.3.6.1.4.1.2011.2.34.2.1.1.13IpAddressread-onlycurrent
dlswRemotePeerLinger
OBJECT-TYPE
Buckup Peer linger
1.3.6.1.4.1.2011.2.34.2.1.1.14INTEGER (0..1440)read-writecurrent
dlswRemotePeerLinkState
OBJECT-TYPE
The state of this tcp transport connection.
1.3.6.1.4.1.2011.2.34.2.1.1.15INTEGER {connecting(1), initCapExchange(2), connected(3), quiescing(4), disconnecting(5), disconnected(6)}read-onlycurrent
dlswRemotePeerRecvPacks
OBJECT-TYPE
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
1.3.6.1.4.1.2011.2.34.2.1.1.16Counter32read-onlycurrent
dlswRemotePeerSendPacks
OBJECT-TYPE
The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.
1.3.6.1.4.1.2011.2.34.2.1.1.17Counter32read-onlycurrent
dlswRemotePeerDrops
OBJECT-TYPE
The number of Switch-to-Switch Protocol (SSP) messages dropped on this tcp transport connection.
1.3.6.1.4.1.2011.2.34.2.1.1.18Counter32read-onlycurrent
dlswRemotePeerUptime
OBJECT-TYPE
The amount of time (in seconds ) since this transport connection last entered the 'connected' state.
1.3.6.1.4.1.2011.2.34.2.1.1.19Counter32read-onlycurrent
dlswRemotePeerEntryStatus
OBJECT-TYPE
This object is used by the manager to create or delete the row entry in the dlswRemotePeerTable following the EntryStatus textual convention.
1.3.6.1.4.1.2011.2.34.2.1.1.20EntryStatusread-writecurrent
dlswBridgeGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.3
dlswBridgeTable
OBJECT-TYPE
The list of bridge group whitch has been created.
1.3.6.1.4.1.2011.2.34.3.1not-accessiblecurrent
dlswBridgeEntry
OBJECT-TYPE
The list of bridge information
1.3.6.1.4.1.2011.2.34.3.1.1not-accessiblecurrent
dlswBridgeNum
OBJECT-TYPE
This value identifies the bridge number .
1.3.6.1.4.1.2011.2.34.3.1.1.1INTEGER (1..63)read-onlycurrent
dlswBridgeStatus
OBJECT-TYPE
This value whitch is equal to 'DeleteLine' identifies to delete a conceptual raw.
1.3.6.1.4.1.2011.2.34.3.1.1.2CreateLineFlagread-writecurrent
dlswBridgeIfTable
OBJECT-TYPE
The list of interfaces on which DLSw is active.
1.3.6.1.4.1.2011.2.34.3.2not-accessiblecurrent
dlswBridgeIfEntry
OBJECT-TYPE
The list of bridge interface information
1.3.6.1.4.1.2011.2.34.3.2.1not-accessiblecurrent
dlswBridgeIfBriGru
OBJECT-TYPE
This value identifies the bridge number attached to the interface.
1.3.6.1.4.1.2011.2.34.3.2.1.1INTEGER (1..63)read-writecurrent
dlswBridgeIfName
OBJECT-TYPE
The name of the interface.
1.3.6.1.4.1.2011.2.34.3.2.1.2DisplayStringread-onlycurrent
dlswBridgeIfStatus
OBJECT-TYPE
This value whitch is equal to 'invalid' identifies to delete a conceptual raw
1.3.6.1.4.1.2011.2.34.3.2.1.3EntryStatusread-writecurrent
dlswLocDirectory
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.4
dlswLocMacTable
OBJECT-TYPE
This table contains locations of MAC addresses. They are local and reachable
1.3.6.1.4.1.2011.2.34.4.1not-accessiblecurrent
dlswLocMacEntry
OBJECT-TYPE
1.3.6.1.4.1.2011.2.34.4.1.1not-accessiblecurrent
dlswLocMacHashIndex
OBJECT-TYPE
The hash value.
1.3.6.1.4.1.2011.2.34.4.1.1.1INTEGERread-onlycurrent
dlswLocMacHashIndexSeqNum
OBJECT-TYPE
The sequence num with smae hash value.
1.3.6.1.4.1.2011.2.34.4.1.1.2INTEGERread-onlycurrent
dlswLocMacMac
OBJECT-TYPE
The MAC address.
1.3.6.1.4.1.2011.2.34.4.1.1.3MacAddressNCread-onlycurrent
dlswLocMacLocalInterfaceName
OBJECT-TYPE
The value is the interface name when dlswLocMacLocationType is 'local'.
1.3.6.1.4.1.2011.2.34.4.1.1.4DisplayStringread-onlycurrent
dlswCircuit
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.5
dlswCircuitTable
OBJECT-TYPE
This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, there are two conceptual rows for each circuit. The table consists of the circuits being established, established, and as an implementation option, circuits that have been disconnected. For circuits carried over transport connections, an entry is created after the CUR_cs was sent or received. For circuits between two locally attached devices, or internal virtual MAC addresses, an entry is created when the equivalent of CUR_cs sent/received status is reached. End station 1 (S1) and End station 2 (S2) are used to represent the two end stations of the circuit. S1 is always an end station which is locally attached. S2 may be locally attached or remote. If it is locally attached, the circuit will be represented by two rows indexed by (A, B) and (B, A) where A & B are the relevant MACs/SAPs. The table may be used to store the causes of disconnection of circuits. It is recommended that the oldest disconnected circuit entry be removed from this table when the memory space of disconnected circuits is needed.
1.3.6.1.4.1.2011.2.34.5.1not-accessiblecurrent
dlswCircuitEntry
OBJECT-TYPE
the list of circuit information
1.3.6.1.4.1.2011.2.34.5.1.1not-accessiblecurrent
dlswCircuitS1CircuitId
OBJECT-TYPE
The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
1.3.6.1.4.1.2011.2.34.5.1.1.1INTEGERread-onlycurrent
dlswCircuitS1Mac
OBJECT-TYPE
The MAC Address of End Station 1 (S1) used for this circuit.
1.3.6.1.4.1.2011.2.34.5.1.1.2MacAddressNCread-onlycurrent
dlswCircuitS1Sap
OBJECT-TYPE
The SAP at End Station 1 (S1) used for this circuit.
1.3.6.1.4.1.2011.2.34.5.1.1.3OCTET STRING (SIZE(1))read-onlycurrent
dlswCircuitS2Mac
OBJECT-TYPE
The MAC Address of End Station 2 (S2) used for this circuit.
1.3.6.1.4.1.2011.2.34.5.1.1.4MacAddressNCread-onlycurrent
dlswCircuitS2Sap
OBJECT-TYPE
The SAP at End Station 2 (S2) used for this circuit.
1.3.6.1.4.1.2011.2.34.5.1.1.5OCTET STRING (SIZE(1))read-onlycurrent
dlswCircuitS1IfIndex
OBJECT-TYPE
The ifEntry index of the local interface through which S1 can be reached.
1.3.6.1.4.1.2011.2.34.5.1.1.6INTEGER (0..2147483647)read-onlycurrent
dlswCircuitS1Ifname
OBJECT-TYPE
The name of the interface whose Ifdex is dlswCircuitS1IfIndex.
1.3.6.1.4.1.2011.2.34.5.1.1.7DisplayStringread-onlycurrent
dlswCircuitS1DlcType
OBJECT-TYPE
The DLC protocol in use between the DLSw node and S1.
1.3.6.1.4.1.2011.2.34.5.1.1.8DlcTyperead-onlycurrent
dlswCircuitS2TAddress
OBJECT-TYPE
If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.
1.3.6.1.4.1.2011.2.34.5.1.1.9IpAddressread-onlycurrent
dlswCircuitS2CircuitId
OBJECT-TYPE
The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
1.3.6.1.4.1.2011.2.34.5.1.1.10INTEGERread-onlycurrent
dlswCircuitOrigin
OBJECT-TYPE
This object specifies which of the two end stations initiated the establishment of this circuit.
1.3.6.1.4.1.2011.2.34.5.1.1.11INTEGER {s1(1), s2(2)}read-onlycurrent
dlswCircuitEntryTime
OBJECT-TYPE
The amount of time (in hundredths of a second) since this circuit table conceptual row was created.
1.3.6.1.4.1.2011.2.34.5.1.1.12TimeTicksread-onlycurrent
dlswCircuitStateTime
OBJECT-TYPE
The amount of time (in hundredths of a second) since this circuit entered the current state.
1.3.6.1.4.1.2011.2.34.5.1.1.13TimeTicksread-onlycurrent
dlswCircuitState
OBJECT-TYPE
The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate. This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function.
1.3.6.1.4.1.2011.2.34.5.1.1.14INTEGER {disconnected(1), circuitStart(2), resolvePending(3), circuitPending(4), circuitEstablished(5), connectPending(6), contactPending(7), connected(8), disconnectPending(9), haltPending(10), haltPendingNoack(11), circuitRestart(12), restartPending(13)}read-onlycurrent
dlswCircuitFCSendGrantedUnits
OBJECT-TYPE
The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
1.3.6.1.4.1.2011.2.34.5.1.1.15INTEGER (0..65535)read-onlycurrent
dlswCircuitFCSendCurrentWndw
OBJECT-TYPE
The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
1.3.6.1.4.1.2011.2.34.5.1.1.16INTEGER (0..65535)read-onlycurrent
dlswCircuitFCRecvGrantedUnits
OBJECT-TYPE
The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
1.3.6.1.4.1.2011.2.34.5.1.1.17INTEGER (0..65535)read-onlycurrent
dlswCircuitFCRecvCurrentWndw
OBJECT-TYPE
The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
1.3.6.1.4.1.2011.2.34.5.1.1.18INTEGER (0..65535)read-onlycurrent
dlswSdlc
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.6
dlswSdlcPortTable
OBJECT-TYPE
The table defines parameters for the interfaces with the encapunation of SDLC.
1.3.6.1.4.1.2011.2.34.6.1not-accessiblecurrent
dlswSdlcPortEntry
OBJECT-TYPE
1.3.6.1.4.1.2011.2.34.6.1.1not-accessiblecurrent
dlswSdlcPortSerialName
OBJECT-TYPE
The name of serial port.
1.3.6.1.4.1.2011.2.34.6.1.1.1DisplayStringread-onlycurrent
dlswSdlcPortEncap
OBJECT-TYPE
The encapunation of the interface.
1.3.6.1.4.1.2011.2.34.6.1.1.2INTEGER {sdlc(1), ppp(2), other(3)}read-onlycurrent
dlswSdlcPortRole
OBJECT-TYPE
The SDLC role of interface.
1.3.6.1.4.1.2011.2.34.6.1.1.3INTEGER {primary(1), seconday(2), norole(3)}read-writecurrent
dlswSdlcPortVmac
OBJECT-TYPE
Define virtual mac address.
1.3.6.1.4.1.2011.2.34.6.1.1.4MacAddressNCread-writecurrent
dlswSdlcPortHoldq
OBJECT-TYPE
Size of hold queue.
1.3.6.1.4.1.2011.2.34.6.1.1.5INTEGER (20..255)read-writecurrent
dlswSdlcPortK
OBJECT-TYPE
Size of local send window.
1.3.6.1.4.1.2011.2.34.6.1.1.6INTEGER (1..7)read-writecurrent
dlswSdlcPortModule
OBJECT-TYPE
Size of modulus.
1.3.6.1.4.1.2011.2.34.6.1.1.7INTEGER {m8(8), m128(128)}read-writecurrent
dlswSdlcPortN1
OBJECT-TYPE
Max number of bits for incoming frames.
1.3.6.1.4.1.2011.2.34.6.1.1.8INTEGER (1..17680)read-writecurrent
dlswSdlcPortN2
OBJECT-TYPE
Number of timers to retry an operation.
1.3.6.1.4.1.2011.2.34.6.1.1.9INTEGER (1..255)read-writecurrent
dlswSdlcPortPollPauseTimer
OBJECT-TYPE
Time between polls for each secondary SDLC station. The unit is thousandth of a second.
1.3.6.1.4.1.2011.2.34.6.1.1.10INTEGER (1..10000)read-writecurrent
dlswSdlcPortSimultaneousEnable
OBJECT-TYPE
Activate SDLC two-way simultaneous mode.
1.3.6.1.4.1.2011.2.34.6.1.1.11INTEGER {enable(1), disenable(2)}read-writecurrent
dlswSdlcPortT1
OBJECT-TYPE
Time to wait for a reply to a frame.
1.3.6.1.4.1.2011.2.34.6.1.1.12INTEGER (1..60000)read-writecurrent
dlswSdlcPortT2
OBJECT-TYPE
Time to wait for a reply used by secondary station.
1.3.6.1.4.1.2011.2.34.6.1.1.13INTEGER (1..60000)read-writecurrent
dlswSdlcLsTable
OBJECT-TYPE
The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching.
1.3.6.1.4.1.2011.2.34.6.2not-accessiblecurrent
dlswSdlcLsEntry
OBJECT-TYPE
1.3.6.1.4.1.2011.2.34.6.2.1not-accessiblecurrent
dlswSdlcLsAddress
OBJECT-TYPE
Define SDLC address.
1.3.6.1.4.1.2011.2.34.6.2.1.1INTEGER (1..254)read-onlycurrent
dlswSdlcLsLocalId
OBJECT-TYPE
The value is XID.
1.3.6.1.4.1.2011.2.34.6.2.1.2INTEGER (0..2147483647)read-writecurrent
dlswSdlcLsRemoteMac
OBJECT-TYPE
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned
1.3.6.1.4.1.2011.2.34.6.2.1.3MacAddressNCread-writecurrent
dlswSdlcLsSsap
OBJECT-TYPE
Source SAP of partner.
1.3.6.1.4.1.2011.2.34.6.2.1.4INTEGER (1..254)read-writecurrent
dlswSdlcLsDsap
OBJECT-TYPE
Destination SAP of partner.
1.3.6.1.4.1.2011.2.34.6.2.1.5INTEGER (1..254)read-writecurrent
dlswSdlcLsStatus
OBJECT-TYPE
This object is used by the manager to create or delete the row entry in the DlswSdlcLsTable following the EntryStatus textual convention.
1.3.6.1.4.1.2011.2.34.6.2.1.6EntryStatusread-writecurrent
dlswLlc2
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.7
dlswLlc2PortTable
OBJECT-TYPE
The table defines parameters for the interfaces with the encapunation of Llc2.
1.3.6.1.4.1.2011.2.34.7.1not-accessiblecurrent
dlswLlc2PortEntry
OBJECT-TYPE
1.3.6.1.4.1.2011.2.34.7.1.1not-accessiblecurrent
dlswLLC2PortAckDelayTime
OBJECT-TYPE
Max time allows I-frames incoming without replay ACK.
1.3.6.1.4.1.2011.2.34.7.1.1.1INTEGER (1..60000)read-writecurrent
dlswLLC2PortAckMax
OBJECT-TYPE
Max number of I-frames received before ACK.
1.3.6.1.4.1.2011.2.34.7.1.1.2INTEGER (1..127)read-writecurrent
dlswLLC2PortLocalWnd
OBJECT-TYPE
Max number of I-frames to send before received ACK.
1.3.6.1.4.1.2011.2.34.7.1.1.3INTEGER (1..127)read-writecurrent
dlswLLC2PortModulus
OBJECT-TYPE
Modulus of LLC2.
1.3.6.1.4.1.2011.2.34.7.1.1.4INTEGER {m8(8), m128(128)}read-writecurrent
dlswLLC2PortN2
OBJECT-TYPE
Retry times of operations.
1.3.6.1.4.1.2011.2.34.7.1.1.5INTEGER (1..255)read-writecurrent
dlswLLC2PortT1
OBJECT-TYPE
Waiting for ACK time after sent a I-frame.
1.3.6.1.4.1.2011.2.34.7.1.1.6INTEGER (1..60000)read-writecurrent
dlswLLC2PortTbusyTime
OBJECT-TYPE
Waiting time while other LLC2 station is in busy state.
1.3.6.1.4.1.2011.2.34.7.1.1.7INTEGER (1..60000)read-writecurrent
dlswLLC2PortTpfTime
OBJECT-TYPE
Waiting time after a P frame is sent.
1.3.6.1.4.1.2011.2.34.7.1.1.8INTEGER (1..60000)read-writecurrent
dlswLLC2PortTrejTime
OBJECT-TYPE
Waiting time after a REJ frame is sent.
1.3.6.1.4.1.2011.2.34.7.1.1.9INTEGER (1..60000)read-writecurrent
dlswLLC2PortTxqMax
OBJECT-TYPE
Queue for sending llc2 I-frames.
1.3.6.1.4.1.2011.2.34.7.1.1.10INTEGER (20..200)read-writecurrent
dlswTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.8
dlswTrapsV2
OBJECT-IDENTITY
1.3.6.1.4.1.2011.2.34.8.0

Notifications

NameOIDStatus
dlswTrapTConnPartnerReject
NOTIFICATION-TYPE
This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. The emission of this trap is controlled by dlswTrapCntlCircuit.
1.3.6.1.4.1.2011.2.34.8.0.1current
dlswTrapTConnChangeState
NOTIFICATION-TYPE
This trap is sent each time a transport connection changes state. The emission of this trap is controlled by dlswTrapCntlTConn.
1.3.6.1.4.1.2011.2.34.8.0.2current
dlswTrapCircuitChangeState
NOTIFICATION-TYPE
This trap is sent each time a circuit change state. The emission of this trap is controlled by dlswTrapCntlCircuit.
1.3.6.1.4.1.2011.2.34.8.0.3current