MIBs Depot

HUAWEI-SEP-MIB

Registered at
1.3.6.1.4.1.2011.5.25.223
Last updated
2013-06-17 00:01
Organization
Huawei Technologies Co.,Ltd.
Revisions
2013-06-17 00:01
Namespace
huawei
Source file
HUAWEI-SEP-MIB
Digest
sha256:322b2ad0c54c393cffd8eb39a8270cbff06adcd684d918523b641a9556e6a1fe

Description

The private mib file includes the general extent information of the device.hwDatacomm(165).hwSepMIB.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
IF-MIBInteger32, InterfaceIndex, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, ifName
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBVlanId
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-COMPLIANCE, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-MIB
HUAWEI-SEP-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
hwSepObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.223.1
hwSepResetPktCnt
OBJECT-TYPE
Reset the packet counter of all running SEP ports. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set.
1.3.6.1.4.1.2011.5.25.223.1.1INTEGER {clear(1), unused(65535)}read-writecurrent
hwSepSegmentTable
OBJECT-TYPE
The table includes the information of SEP segments.
1.3.6.1.4.1.2011.5.25.223.1.2not-accessiblecurrent
hwSepSegmentEntry
OBJECT-TYPE
The table includes the information of SEP segments. The index of the table is SEP segment id.
1.3.6.1.4.1.2011.5.25.223.1.2.1not-accessiblecurrent
hwSepSegmentId
OBJECT-TYPE
SEP segment Identifier.
1.3.6.1.4.1.2011.5.25.223.1.2.1.1Integer32 (1..1024)not-accessiblecurrent
hwSepControlVlanId
OBJECT-TYPE
The control VLAN identifier of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
1.3.6.1.4.1.2011.5.25.223.1.2.1.2Integer32 (0 | 1..4094)read-createcurrent
hwSepPreemptManual
OBJECT-TYPE
Trigger the manual preemption by setting the object to be 1. When getting the object it will always be 0.
1.3.6.1.4.1.2011.5.25.223.1.2.1.3Integer32 (0..1)read-createcurrent
hwSepPreemptDelay
OBJECT-TYPE
The preemption delay timer of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
1.3.6.1.4.1.2011.5.25.223.1.2.1.4Integer32 (0 | 15..600)read-createcurrent
hwSepBlockPortMode
OBJECT-TYPE
The way to choose the port to be blocked. if the value of the object is set 1, the optimal port. if the value of the object is set 2, the middle port. if the value of the object is set 3, the port with the designated hop(hwSepBlockPortHop). if the value of the object is set 4, the port with the designated system name(hwSepBlockPortSysname) and port name(hwSepBlockPortIfname). if the value of the object is set 5, the operation is delete configuration of the block port. BlockPortMode | BlockPortValue | active inactive -----------------------|------------------------------------------------------------------------------ optimal(1) | (1) (2/3/4) middle(2) | (2) (1/3/4) hop(3) | (3)(hwSepBlockPortHop) (1/2/4) name(4) | (4)(hwSepBlockPortSysname & hwSepBlockPortIfname) (1/2/3)
1.3.6.1.4.1.2011.5.25.223.1.2.1.5INTEGER {optimal(1), middle(2), hop(3), name(4), null(5)}read-createcurrent
hwSepBlockPortHop
OBJECT-TYPE
The hop count of the preffered blocking port. If the value of the object is set 0, the operation is delete configuration. If the mode of block port is not hop(3), the value is not have effect.
1.3.6.1.4.1.2011.5.25.223.1.2.1.6Integer32 (0 | 1..512)read-createcurrent
hwSepBlockPortSysname
OBJECT-TYPE
The system name of the preffered blocking port. if not set the value of hwSepBlockPortIfname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not task effect.
1.3.6.1.4.1.2011.5.25.223.1.2.1.7OCTET STRING (SIZE(0..20))read-createcurrent
hwSepBlockPortIfname
OBJECT-TYPE
The interface name of the preffered blocking port. if not set the value of hwSepBlockPortSysname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not take effect.
1.3.6.1.4.1.2011.5.25.223.1.2.1.8OCTET STRING (SIZE(0..63))read-createcurrent
hwSepTcNotifySep
OBJECT-TYPE
The bitmap of the SEP segments to which the topology change event will be notified
1.3.6.1.4.1.2011.5.25.223.1.2.1.9OCTET STRING (SIZE(0..129))read-createcurrent
hwSepTcNotifyRrpp
OBJECT-TYPE
If set 1, the topology change event of the SEP segment will be notified to RRPP
1.3.6.1.4.1.2011.5.25.223.1.2.1.10EnabledStatusread-createcurrent
hwSepTcNotifyStp
OBJECT-TYPE
If set 1, the topology change event of the SEP segment will be notified to STP
1.3.6.1.4.1.2011.5.25.223.1.2.1.11EnabledStatusread-createcurrent
hwSepTcNotifyVpls
OBJECT-TYPE
If set 1, the topology change event of the SEP segment will be notified to VPLS
1.3.6.1.4.1.2011.5.25.223.1.2.1.12EnabledStatusread-createcurrent
hwSepTcNotifyVll
OBJECT-TYPE
If set 1, the topology change event of the SEP segment will be notified to VLL
1.3.6.1.4.1.2011.5.25.223.1.2.1.13EnabledStatusread-createcurrent
hwSepTcNotifySmartLinkCtrlVlan
OBJECT-TYPE
If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link. If the value of the object is set 0, the operation is delete configuration.
1.3.6.1.4.1.2011.5.25.223.1.2.1.14Integer32 (0 | 1..4094)read-createcurrent
hwSepDealSmartLinkFlush
OBJECT-TYPE
If set 1, the SEP segment will deal the smart link flush-FDB packet
1.3.6.1.4.1.2011.5.25.223.1.2.1.15EnabledStatusread-createcurrent
hwSepProtectedInstanceList
OBJECT-TYPE
The protected instance list of the SEP segment
1.3.6.1.4.1.2011.5.25.223.1.2.1.16OCTET STRING (SIZE(0..512))read-createcurrent
hwSepTcProtectionInterval
OBJECT-TYPE
The interval of tc-protection, the default value is 2.
1.3.6.1.4.1.2011.5.25.223.1.2.1.17Integer32 (1..10)read-createcurrent
hwSepSegmentDescription
OBJECT-TYPE
A textual description of the SEP segment. It is mandatory that this only contain no more than 255 printable ASCII characters.
1.3.6.1.4.1.2011.5.25.223.1.2.1.18OCTET STRING (SIZE(0..255))read-createcurrent
hwSepSegmentRowStatus
OBJECT-TYPE
Operation of CreateAndGo can be used to create a new SEP segment, and operation of Destroy be used to destroy an existent SEP segment.
1.3.6.1.4.1.2011.5.25.223.1.2.1.128RowStatusread-createcurrent
hwSepTopologyTable
OBJECT-TYPE
The table includes the information of the topology of the SEP segment.
1.3.6.1.4.1.2011.5.25.223.1.3not-accessiblecurrent
hwSepTopologyEntry
OBJECT-TYPE
The table includes the information of the topology of the SEP segment. The index of the table is the segment identifier and the hop count of the port.
1.3.6.1.4.1.2011.5.25.223.1.3.1not-accessiblecurrent
hwSepHop
OBJECT-TYPE
The hop count of the port.
1.3.6.1.4.1.2011.5.25.223.1.3.1.1Integer32 (1..512)not-accessiblecurrent
hwSepPortId
OBJECT-TYPE
The port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
1.3.6.1.4.1.2011.5.25.223.1.3.1.2OCTET STRING (SIZE(0..8))read-onlycurrent
hwSepTopoSysname
OBJECT-TYPE
The system name.
1.3.6.1.4.1.2011.5.25.223.1.3.1.3OCTET STRING (SIZE(0..20))read-onlycurrent
hwSepTopoPortname
OBJECT-TYPE
The port name.
1.3.6.1.4.1.2011.5.25.223.1.3.1.4OCTET STRING (SIZE(0..16))read-onlycurrent
hwSepTopoPortConfigPriority
OBJECT-TYPE
The configured port priority.The default value is 64.
1.3.6.1.4.1.2011.5.25.223.1.3.1.5Integer32 (1..128)read-onlycurrent
hwSepTopoPortActivePriority
OBJECT-TYPE
The active port priority.
1.3.6.1.4.1.2011.5.25.223.1.3.1.6Integer32read-onlycurrent
hwSepTopoConfigPortRole
OBJECT-TYPE
The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
1.3.6.1.4.1.2011.5.25.223.1.3.1.7Integer32read-onlycurrent
hwSepTopoActivePortRole
OBJECT-TYPE
The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
1.3.6.1.4.1.2011.5.25.223.1.3.1.8Integer32read-onlycurrent
hwSepTopoPortNbrState
OBJECT-TYPE
The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5
1.3.6.1.4.1.2011.5.25.223.1.3.1.9INTEGER {down(1), init(2), preup(3), up(4), conflict(5)}read-onlycurrent
hwSepTopoBrotherPortId
OBJECT-TYPE
The brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
1.3.6.1.4.1.2011.5.25.223.1.3.1.10OCTET STRING (SIZE(0..8))read-onlycurrent
hwSepTopoNbrPortId
OBJECT-TYPE
The neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
1.3.6.1.4.1.2011.5.25.223.1.3.1.11OCTET STRING (SIZE(0..8))read-onlycurrent
hwSepTopoPortLinkState
OBJECT-TYPE
The link state of the port: state value link down 1 link up 2
1.3.6.1.4.1.2011.5.25.223.1.3.1.12INTEGER {down(1), up(2)}read-onlycurrent
hwSepTopoPortFwdState
OBJECT-TYPE
The forwarding state of the port: state value discarding 1 forwarding 2
1.3.6.1.4.1.2011.5.25.223.1.3.1.13INTEGER {discarding(1), forwarding(2)}read-onlycurrent
hwSepPortTable
OBJECT-TYPE
The table includes the information of SEP ports
1.3.6.1.4.1.2011.5.25.223.1.4not-accessiblecurrent
hwSepPortEntry
OBJECT-TYPE
The table includes the information of SEP ports. The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
1.3.6.1.4.1.2011.5.25.223.1.4.1not-accessiblecurrent
hwSepPortType
OBJECT-TYPE
The port type.Currently SEP just support ethernet port and the value is 1.
1.3.6.1.4.1.2011.5.25.223.1.4.1.1Unsigned32 (1)not-accessiblecurrent
hwSepPortId1
OBJECT-TYPE
The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port.
1.3.6.1.4.1.2011.5.25.223.1.4.1.2Unsigned32 (0..2147483647)not-accessiblecurrent
hwSepPortId2
OBJECT-TYPE
The port identifier2, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.223.1.4.1.3Unsigned32 (0..2147483647)not-accessiblecurrent
hwSepPortId3
OBJECT-TYPE
The port identifier3, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.223.1.4.1.4Unsigned32 (0..2147483647)not-accessiblecurrent
hwSepPortId4
OBJECT-TYPE
The port identifier4, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.223.1.4.1.5Unsigned32 (0..2147483647)not-accessiblecurrent
hwSepSysname
OBJECT-TYPE
The system name.
1.3.6.1.4.1.2011.5.25.223.1.4.1.6OCTET STRING (SIZE(0..20))read-onlycurrent
hwSepPortname
OBJECT-TYPE
The port name
1.3.6.1.4.1.2011.5.25.223.1.4.1.7OCTET STRING (SIZE(0..16))read-onlycurrent
hwSepPortConfigPriority
OBJECT-TYPE
The configured port priority.The default value is 64.
1.3.6.1.4.1.2011.5.25.223.1.4.1.8Integer32 (1..128)read-createcurrent
hwSepPortActivePriority
OBJECT-TYPE
The active port priority.
1.3.6.1.4.1.2011.5.25.223.1.4.1.9Integer32read-onlycurrent
hwSepConfigPortRole
OBJECT-TYPE
The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
1.3.6.1.4.1.2011.5.25.223.1.4.1.10Integer32read-createcurrent
hwSepActivePortRole
OBJECT-TYPE
The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32
1.3.6.1.4.1.2011.5.25.223.1.4.1.11Integer32read-onlycurrent
hwSepPortNbrState
OBJECT-TYPE
The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5
1.3.6.1.4.1.2011.5.25.223.1.4.1.12INTEGER {down(1), init(2), preup(3), up(4), conflict(5)}read-onlycurrent
hwSepNbrPortId
OBJECT-TYPE
The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex)
1.3.6.1.4.1.2011.5.25.223.1.4.1.13OCTET STRING (SIZE(0..8))read-onlycurrent
hwSepPortFwdState
OBJECT-TYPE
The forwarding state of the port: state value discarding 1 forwarding 2
1.3.6.1.4.1.2011.5.25.223.1.4.1.14INTEGER {discarding(1), forwarding(2)}read-onlycurrent
hwSepRxNbrPktCnt
OBJECT-TYPE
The number of received neighbor packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.15Integer32read-onlycurrent
hwSepTxNbrPktCnt
OBJECT-TYPE
The number of transmited neighbor packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.16Integer32read-onlycurrent
hwSepRxLsaInfoPktCnt
OBJECT-TYPE
The number of received LSA information packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.17Integer32read-onlycurrent
hwSepTxLsaInfoPktCnt
OBJECT-TYPE
The number of transmitted LSA information packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.18Integer32read-onlycurrent
hwSepRxLsaAckPktCnt
OBJECT-TYPE
The number of received LSA acknowledgement packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.19Integer32read-onlycurrent
hwSepTxLsaAckPktCnt
OBJECT-TYPE
The number of transmitted LSA acknowledgement packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.20Integer32read-onlycurrent
hwSepRxPreemptReqPktCnt
OBJECT-TYPE
The number of received preemption request packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.21Integer32read-onlycurrent
hwSepTxPreemptReqPktCnt
OBJECT-TYPE
The number of transmitted preemption request packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.22Integer32read-onlycurrent
hwSepRxPreemptAckPktCnt
OBJECT-TYPE
The number of received preemption acknowledgement packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.23Integer32read-onlycurrent
hwSepTxPreemptAckPktCnt
OBJECT-TYPE
The number of transmitted preemption acknowledgement packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.24Integer32read-onlycurrent
hwSepRxTcPktCnt
OBJECT-TYPE
The number of received topology change packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.25Integer32read-onlycurrent
hwSepTxTcPktCnt
OBJECT-TYPE
The number of transmitted topology change packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.26Integer32read-onlycurrent
hwSepRxEpaPktCnt
OBJECT-TYPE
The number of received topology change packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.27Integer32read-onlycurrent
hwSepTxEpaPktCnt
OBJECT-TYPE
The number of transmitted topology change packets.
1.3.6.1.4.1.2011.5.25.223.1.4.1.28Integer32read-onlycurrent
hwSepResetPortPktCnt
OBJECT-TYPE
Reset the packet counter of the port in the SEP segment. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set.
1.3.6.1.4.1.2011.5.25.223.1.4.1.29INTEGER {clear(1), unused(65535)}read-writecurrent
hwSepPortRowStatus
OBJECT-TYPE
Operation of CreateAndGo can be used to have a port join the SEP segment. and operation of Destroy be used to have a port leave the SEP segment.
1.3.6.1.4.1.2011.5.25.223.1.4.1.128RowStatusread-createcurrent
hwSepGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.223.2
hwSepConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.223.3
hwSepCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.223.3.1

Conformance

NameOIDStatus
hwSepGlobalInfoGroup
OBJECT-GROUP
The group of global information.
1.3.6.1.4.1.2011.5.25.223.2.1current
hwSepSegmentInfoGroup
OBJECT-GROUP
The group of segment information.
1.3.6.1.4.1.2011.5.25.223.2.2current
hwSepPortInfoGroup
OBJECT-GROUP
The group of port information.
1.3.6.1.4.1.2011.5.25.223.2.3current
hwSepTopologyInfoGroup
OBJECT-GROUP
The group of topology information.
1.3.6.1.4.1.2011.5.25.223.2.4current
hwSepCompliance
MODULE-COMPLIANCE
The core compliance statement for all implementations.
1.3.6.1.4.1.2011.5.25.223.3.1.1current