MIBs Depot

HUAWEI-QINQ-MIB

Registered at
1.3.6.1.4.1.2011.5.25.116
Last updated
2020-12-29 15:38
Organization
Huawei Technologies Co.,Ltd.
Revisions
2020-12-29 15:38, 2020-05-26 15:38, 2020-05-18 15:38, 2019-09-06 15:38, 2017-12-20 15:38, 2017-08-17 15:38, 2014-06-10 15:38
Namespace
huawei
Source file
HUAWEI-QINQ-MIB
Digest
sha256:c2147dca40880cb6b73e246c630c408c102e6bc061c3b3cf244e0bce85c6839c

Description

Modify hwQinQAsymmetryUserMode hwQinQSwapCfgFlag hwQinQGroupStat DEFVAL .

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-L2IF-MIBVlanList
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBVlanId, VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-L2IF-MIB
HUAWEI-MIB
HUAWEI-QINQ-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
BpduIndex
TEXTUAL-CONVENTION
A list value for bpdu.
current

Objects

NameOIDSyntaxAccessStatus
hwQinQSystemBase
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.116.1
hwQinQSystemWellKnowMac
OBJECT-TYPE
The destination MAC address replacing the original destination macAddress is a well-known multicast address. This well-known multicast address shields BPDUs inner details to allow these BPDUs to be transmitted with a tag through the carrier's network.
1.3.6.1.4.1.2011.5.25.116.1.1MacAddressread-writecurrent
hwQinQSystemBridgeRole
OBJECT-TYPE
It indicates the Bridge 's location, having two possible values :Customers' Bridge and Providers' Bridge.
1.3.6.1.4.1.2011.5.25.116.1.2INTEGER {customer(1), provider(2)}read-writecurrent
hwBpduSystemDropPacketSta
OBJECT-TYPE
View statistics about the discarded BPDUs.
1.3.6.1.4.1.2011.5.25.116.1.3Integer32 (0..65535)read-writecurrent
hwQinQSystemEtherType
OBJECT-TYPE
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. Default is '8100'h.
1.3.6.1.4.1.2011.5.25.116.1.4Unsigned32 (1536..65535)read-writecurrent
hwQinQMngObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.116.2
hwQinQBpduTunnelTable
OBJECT-TYPE
QinQ-port configuration table.
1.3.6.1.4.1.2011.5.25.116.2.1not-accessiblecurrent
hwQinQBpduTunnelEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ function.
1.3.6.1.4.1.2011.5.25.116.2.1.1not-accessiblecurrent
hwQinQBpduTunnelIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.116.2.1.1.1Integer32not-accessiblecurrent
hwQinQEtherEncpsType
OBJECT-TYPE
The value of tag type is encapsulated in the head of the Ethernet frame To distinguish the encapsulated mode between the 802.1Q and QinQ.
1.3.6.1.4.1.2011.5.25.116.2.1.1.2OCTET STRING (SIZE(2))read-writecurrent
hwQinQBpduTunnelEnableOneQBpduTunnel
OBJECT-TYPE
The value indicates whether the 1Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable.
1.3.6.1.4.1.2011.5.25.116.2.1.1.3EnabledStatusread-writecurrent
hwQinQBpduTunnelEnableBpduTag
OBJECT-TYPE
Whether to enable the setting of BPDU Tunnel tag. Default is disabled.
1.3.6.1.4.1.2011.5.25.116.2.1.1.4EnabledStatusread-onlycurrent
hwQinQBpduTunnelEnableTwoQBpduTunnel
OBJECT-TYPE
The value indicates whether the 2Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable. Default is disabled.
1.3.6.1.4.1.2011.5.25.116.2.1.1.5EnabledStatusread-onlycurrent
hwQinQBpduTunnelCustomerBpduTag
OBJECT-TYPE
The tag is inserted into the head of the BPDU ,to support that can be transmitted through the services' network.
1.3.6.1.4.1.2011.5.25.116.2.1.1.6Integer32read-writecurrent
hwQinQBpduTunnelCustomerBpduTagListLow
OBJECT-TYPE
The list describes accessible bode from different vlan (0 to 2047).
1.3.6.1.4.1.2011.5.25.116.2.1.1.7OCTET STRING (SIZE(256))read-writecurrent
hwQinQBpduTunnelCustomerBpduTagListHigh
OBJECT-TYPE
The list describes accessible bpdu from different vlan (2048 to 4094).
1.3.6.1.4.1.2011.5.25.116.2.1.1.8OCTET STRING (SIZE(256))read-writecurrent
hwQinQRemarkOuterTpid
OBJECT-TYPE
The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch, If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.
1.3.6.1.4.1.2011.5.25.116.2.1.1.9INTEGER {hexffff(1), hex88a8(2), hex9100(3), hex8100(4)}read-writecurrent
hwQinQBpduTunnelEnableBpduFilter
OBJECT-TYPE
The value indicates whether the BPDU filter function is enabled. If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable.
1.3.6.1.4.1.2011.5.25.116.2.1.1.10EnabledStatusread-writecurrent
hwQinQSubIfVlanStackingTable
OBJECT-TYPE
Used to configure packets'vlan stacking in sub interface, receive one-tag packets and transmit two-tag packets, where the outer-tag inserted is in hwQinQSubIfVlanStackingTable.
1.3.6.1.4.1.2011.5.25.116.2.2not-accessiblecurrent
hwQinQSubIfVlanStackingEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ-stacking function.
1.3.6.1.4.1.2011.5.25.116.2.2.1not-accessiblecurrent
hwQinQSubIfStackingIfIndex
OBJECT-TYPE
Index number of the QinQ-stacking interface.
1.3.6.1.4.1.2011.5.25.116.2.2.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfStackingCEVlanStart
OBJECT-TYPE
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
1.3.6.1.4.1.2011.5.25.116.2.2.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfStackingCEVlanEnd
OBJECT-TYPE
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
1.3.6.1.4.1.2011.5.25.116.2.2.1.3VlanIdread-createcurrent
hwQinQSubIfStackGroupId
OBJECT-TYPE
Group-management id.
1.3.6.1.4.1.2011.5.25.116.2.2.1.4Integer32 (0..16)read-createcurrent
hwQinQSubIfStackingRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfVlanStackingTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfVlanStackingTable.
1.3.6.1.4.1.2011.5.25.116.2.2.1.5RowStatusread-createcurrent
hwQinQSubIfStackingPEVlan
OBJECT-TYPE
PE vlan id.
1.3.6.1.4.1.2011.5.25.116.2.2.1.6Integer32 (0..4094)read-createcurrent
hwQinQSubIfStackingStatTable
OBJECT-TYPE
When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to statistic total number of the out packets and in packets.
1.3.6.1.4.1.2011.5.25.116.2.3not-accessiblecurrent
hwQinQSubIfStackingStatEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ-stacking function.
1.3.6.1.4.1.2011.5.25.116.2.3.1not-accessiblecurrent
hwQinQSubIfStackingStatIfIndex
OBJECT-TYPE
Index number of the QinQ-stacking interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfStackingStatCEVlan
OBJECT-TYPE
This object indicates the CE VLAN ID of the sub-interface configured with VLAN stacking.
1.3.6.1.4.1.2011.5.25.116.2.3.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfStackStatGroupId
OBJECT-TYPE
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
1.3.6.1.4.1.2011.5.25.116.2.3.1.3Integer32 (1..16)read-onlycurrent
hwQinQSubIfStackingStatOutPackets
OBJECT-TYPE
Total number of out packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.4Counter64read-onlycurrent
hwQinQSubIfStackingStatOutBytes
OBJECT-TYPE
Total number of out bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.5Counter64read-onlycurrent
hwQinQSubIfStackingStatInPackets
OBJECT-TYPE
Total number of in packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.6Counter64read-onlycurrent
hwQinQSubIfStackingStatInBytes
OBJECT-TYPE
Total number of in bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.7Counter64read-onlycurrent
hwQinQSubIfStackStatOutBdPackets
OBJECT-TYPE
Total number of broadcast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.8Counter64read-onlycurrent
hwQinQSubIfStackStatInBdPackets
OBJECT-TYPE
Total number of broadcast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.9Counter64read-onlycurrent
hwQinQSubIfStackStatOutMuPackets
OBJECT-TYPE
Total number of multicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.10Counter64read-onlycurrent
hwQinQSubIfStackStatInMuPackets
OBJECT-TYPE
Total number of multicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.11Counter64read-onlycurrent
hwQinQSubIfStackStatOutUniPackets
OBJECT-TYPE
Total number of unicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.12Counter64read-onlycurrent
hwQinQSubIfStackStatInUniPackets
OBJECT-TYPE
Total number of unicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.3.1.13Counter64read-onlycurrent
hwQinQSubIfTermTable
OBJECT-TYPE
The table is used to configure QinQ-termination function in sub interface, then packets transmitted from this sub interface input with two tags will be terminated.
1.3.6.1.4.1.2011.5.25.116.2.4not-accessiblecurrent
hwQinQSubIfTermEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ-termination function.
1.3.6.1.4.1.2011.5.25.116.2.4.1not-accessiblecurrent
hwQinQSubIfTermIfIndex
OBJECT-TYPE
Index number of the QinQ VLAN tag termination sub-interface.
1.3.6.1.4.1.2011.5.25.116.2.4.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfTermPEVlan
OBJECT-TYPE
Outer VLAN ID of the packets which have two tags before being terminated.
1.3.6.1.4.1.2011.5.25.116.2.4.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfTermCEVlanStart
OBJECT-TYPE
When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
1.3.6.1.4.1.2011.5.25.116.2.4.1.3VlanIdOrNonenot-accessiblecurrent
hwQinQSubIfTermCEVlanEnd
OBJECT-TYPE
When configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
1.3.6.1.4.1.2011.5.25.116.2.4.1.4VlanIdread-createcurrent
hwQinQSubIfTermGroupId
OBJECT-TYPE
Group-management id.
1.3.6.1.4.1.2011.5.25.116.2.4.1.5Integer32 (0..16)read-createcurrent
hwQinQSubIfTermRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfTermTable.
1.3.6.1.4.1.2011.5.25.116.2.4.1.6RowStatusread-createcurrent
hwQinQSubIfTermCeVlanAny
OBJECT-TYPE
The QinQ VLAN tag termination sub-interface permits packets carrying any inner VLAN tag.
1.3.6.1.4.1.2011.5.25.116.2.4.1.7INTEGER {anyother(1)}read-createcurrent
hwQinQSubIfTermStatTable
OBJECT-TYPE
When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets.
1.3.6.1.4.1.2011.5.25.116.2.5not-accessiblecurrent
hwQinQSubIfTermStatEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ-termination function.
1.3.6.1.4.1.2011.5.25.116.2.5.1not-accessiblecurrent
hwQinQSubIfTermStatIfIndex
OBJECT-TYPE
Index number of the QinQ-termination interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfTermStatPEVlan
OBJECT-TYPE
Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index.
1.3.6.1.4.1.2011.5.25.116.2.5.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfTermStatCEVlan
OBJECT-TYPE
Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index.
1.3.6.1.4.1.2011.5.25.116.2.5.1.3VlanIdnot-accessiblecurrent
hwQinQSubIfTermStatGroupId
OBJECT-TYPE
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
1.3.6.1.4.1.2011.5.25.116.2.5.1.4Integer32 (1..16)read-onlycurrent
hwQinQSubIfTermStatOutPackets
OBJECT-TYPE
Total number of out packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.5Counter64read-onlycurrent
hwQinQSubIfTermStatOutBytes
OBJECT-TYPE
Total number of out bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.6Counter64read-onlycurrent
hwQinQSubIfTermStatInPackets
OBJECT-TYPE
Total number of in packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.7Counter64read-onlycurrent
hwQinQSubIfTermStatInBytes
OBJECT-TYPE
Total number of in bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.8Counter64read-onlycurrent
hwQinQSubIfTermStatOutBdPackets
OBJECT-TYPE
Total number of broadcast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.9Counter64read-onlycurrent
hwQinQSubIfTermStatInBdPackets
OBJECT-TYPE
Total number of broadcast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.10Counter64read-onlycurrent
hwQinQSubIfTermStatOutMuPackets
OBJECT-TYPE
Total number of multicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.11Counter64read-onlycurrent
hwQinQSubIfTermStatInMuPackets
OBJECT-TYPE
Total number of multicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.12Counter64read-onlycurrent
hwQinQSubIfTermStatOutUniPackets
OBJECT-TYPE
Total number of unicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.13Counter64read-onlycurrent
hwQinQSubIfTermStatInUniPackets
OBJECT-TYPE
Total number of unicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.5.1.14Counter64read-onlycurrent
hwQinQStaticARPCfgTable
OBJECT-TYPE
The table is used to configure QinQ static ARP.
1.3.6.1.4.1.2011.5.25.116.2.6not-accessiblecurrent
hwQinQStaticARPCfgEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ function.
1.3.6.1.4.1.2011.5.25.116.2.6.1not-accessiblecurrent
hwQinQStaticARPCfgIfIndex
OBJECT-TYPE
The interface's Index.
1.3.6.1.4.1.2011.5.25.116.2.6.1.1InterfaceIndexnot-accessiblecurrent
hwQinQStaticARPCfgIp
OBJECT-TYPE
The IP address.
1.3.6.1.4.1.2011.5.25.116.2.6.1.2IpAddressnot-accessiblecurrent
hwQinQStaticARPCfgMac
OBJECT-TYPE
The MAC address.
1.3.6.1.4.1.2011.5.25.116.2.6.1.3MacAddressread-createcurrent
hwQinQStaticARPCfgVlan
OBJECT-TYPE
The first vlan id.
1.3.6.1.4.1.2011.5.25.116.2.6.1.4VlanIdread-createcurrent
hwQinQStaticARPCfgCEVlan
OBJECT-TYPE
The second vlan id.
1.3.6.1.4.1.2011.5.25.116.2.6.1.5Integer32 (0..4094)read-createcurrent
hwQinQStaticARPCfgRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticARPCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticARPCfgTable.
1.3.6.1.4.1.2011.5.25.116.2.6.1.6RowStatusread-createcurrent
hwQinQStaticMACCfgTable
OBJECT-TYPE
The table is used to configure static MAC.
1.3.6.1.4.1.2011.5.25.116.2.7not-accessiblecurrent
hwQinQStaticMACCfgEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ function.
1.3.6.1.4.1.2011.5.25.116.2.7.1not-accessiblecurrent
hwQinQStaticMACCfgMac
OBJECT-TYPE
The MAC address.
1.3.6.1.4.1.2011.5.25.116.2.7.1.1MacAddressnot-accessiblecurrent
hwQinQStaticMACCfgVlan
OBJECT-TYPE
Vlan id that the MAC address belongs to.
1.3.6.1.4.1.2011.5.25.116.2.7.1.2VlanIdnot-accessiblecurrent
hwQinQStaticMACCfgVsiName
OBJECT-TYPE
Name of VSI that the MAC address belongs to.
1.3.6.1.4.1.2011.5.25.116.2.7.1.3OCTET STRING (SIZE(0..31))not-accessiblecurrent
hwQinQStaticMACCfgPEVlan
OBJECT-TYPE
PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable.
1.3.6.1.4.1.2011.5.25.116.2.7.1.4VlanIdread-createcurrent
hwQinQStaticMACCfgCEVlan
OBJECT-TYPE
CE vlan id.
1.3.6.1.4.1.2011.5.25.116.2.7.1.5Integer32 (0..4094)read-createcurrent
hwQinQStaticMACCfgType
OBJECT-TYPE
The type of the MAC.
1.3.6.1.4.1.2011.5.25.116.2.7.1.6INTEGER {invalid(0), dynamid(1), static(2), blackhole(3), toobig(4)}read-createcurrent
hwQinQStaticMACCfgIfIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.116.2.7.1.7InterfaceIndexread-createcurrent
hwQinQStaticMACCfgFlag
OBJECT-TYPE
The config type.
1.3.6.1.4.1.2011.5.25.116.2.7.1.8INTEGER {vlan(1), vsi(2), mapping(3), qinqtermination(4), dot1qtermination(5)}read-createcurrent
hwQinQStaticMACCfgRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticMACCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticMACCfgTable.
1.3.6.1.4.1.2011.5.25.116.2.7.1.9RowStatusread-createcurrent
hwQinQSubIfDot1qTermTable
OBJECT-TYPE
Used to configure Dot1q-termination function in sub interface ,then packets transmitted from this sub interface input with one tag will be terminated.
1.3.6.1.4.1.2011.5.25.116.2.8not-accessiblecurrent
hwQinQSubIfDot1qTermEntry
OBJECT-TYPE
The entry of an interface enabled the Dot1q-termination function.
1.3.6.1.4.1.2011.5.25.116.2.8.1not-accessiblecurrent
hwQinQSubIfDot1qTermIfIndex
OBJECT-TYPE
Index number of the Dot1q-termination interface.
1.3.6.1.4.1.2011.5.25.116.2.8.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfDot1qTermVidStart
OBJECT-TYPE
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
1.3.6.1.4.1.2011.5.25.116.2.8.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfDot1qTermVidEnd
OBJECT-TYPE
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
1.3.6.1.4.1.2011.5.25.116.2.8.1.3VlanIdread-createcurrent
hwQinQSubIfDot1qTermGroupId
OBJECT-TYPE
Group-management id.
1.3.6.1.4.1.2011.5.25.116.2.8.1.4Integer32 (0..16)read-createcurrent
hwQinQSubIfDot1qTermRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfDot1qTermTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQSubIfDot1qTermTable.
1.3.6.1.4.1.2011.5.25.116.2.8.1.5RowStatusread-createcurrent
hwQinQSubIfDot1qTermStatTable
OBJECT-TYPE
When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to statistic total number of the out packets and in packets.
1.3.6.1.4.1.2011.5.25.116.2.9not-accessiblecurrent
hwQinQSubIfDot1qTermStatEntry
OBJECT-TYPE
The entry of an interface configured Dot1q-termination function.
1.3.6.1.4.1.2011.5.25.116.2.9.1not-accessiblecurrent
hwQinQSubIfDot1qTermStatIfIndex
OBJECT-TYPE
Index number of the Dot1q-termination interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfDot1qTermStatCEVlan
OBJECT-TYPE
Inner vlan in packets which input the Dot1q-termination sub interface, used to indicate the packets as an index.
1.3.6.1.4.1.2011.5.25.116.2.9.1.2VlanIdnot-accessiblecurrent
hwQinQSubIfDot1qTermStatGroupId
OBJECT-TYPE
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
1.3.6.1.4.1.2011.5.25.116.2.9.1.3Integer32 (1..16)read-onlycurrent
hwQinQSubIfDot1qTermStatOutPackets
OBJECT-TYPE
Total number of out packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.4Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatOutBytes
OBJECT-TYPE
Total number of out bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.5Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatInPackets
OBJECT-TYPE
Total number of in packets of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.6Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatInBytes
OBJECT-TYPE
Total number of in bytes of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.7Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatOutBdPackets
OBJECT-TYPE
Total number of broadcast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.8Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatInBdPackets
OBJECT-TYPE
Total number of broadcast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.9Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatOutMuPackets
OBJECT-TYPE
Total number of multicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.10Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatInMuPackets
OBJECT-TYPE
Total number of multicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.11Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatOutUniPackets
OBJECT-TYPE
Total number of unicast packets transmitted out of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.12Counter64read-onlycurrent
hwQinQSubIfDot1qTermStatInUniPackets
OBJECT-TYPE
Total number of unicast packets received from the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.9.1.13Counter64read-onlycurrent
hwQinQModeCfgTable
OBJECT-TYPE
The table contains mode type and ethernet encapsulation type.
1.3.6.1.4.1.2011.5.25.116.2.10not-accessiblecurrent
hwQinQModeCfgEntry
OBJECT-TYPE
The mode type and ethernet encapsulation type of an interface entry.
1.3.6.1.4.1.2011.5.25.116.2.10.1not-accessiblecurrent
hwQinQModeCfgIfIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.116.2.10.1.1InterfaceIndexnot-accessiblecurrent
hwQinQModeCfgMode
OBJECT-TYPE
Mode type of the interface.
1.3.6.1.4.1.2011.5.25.116.2.10.1.2INTEGER {common(1), qinq(2)}read-writecurrent
hwQinQEtherType
OBJECT-TYPE
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ.
1.3.6.1.4.1.2011.5.25.116.2.10.1.3Unsigned32 (1536..65535)read-writecurrent
hwQinQCeEtherType
OBJECT-TYPE
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ.
1.3.6.1.4.1.2011.5.25.116.2.10.1.4Unsigned32 (1536..65535)read-writecurrent
hwQinQCtrlVlanCfgTable
OBJECT-TYPE
The control-vlan id and control-vlan's attributes can be configured in sub interface. You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination function or Dot1q-termination function.
1.3.6.1.4.1.2011.5.25.116.2.11not-accessiblecurrent
hwQinQCtrlVlanCfgEntry
OBJECT-TYPE
The Control-vlan configuration entry.
1.3.6.1.4.1.2011.5.25.116.2.11.1not-accessiblecurrent
hwQinQCtrlVlanCfgIfIndex
OBJECT-TYPE
Index number of the sub interface.
1.3.6.1.4.1.2011.5.25.116.2.11.1.1InterfaceIndexnot-accessiblecurrent
hwQinQCtrlVlan
OBJECT-TYPE
Control-Vlan id.
1.3.6.1.4.1.2011.5.25.116.2.11.1.2VlanIdread-createcurrent
hwQinQSubIfType
OBJECT-TYPE
The type of sub interface.
1.3.6.1.4.1.2011.5.25.116.2.11.1.3INTEGER {qinq(1), dot1q(2)}read-createcurrent
hwQinQCtrlVlanFlag
OBJECT-TYPE
The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable), the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch), the localswitch attribute enabled, which means two tags of packets will be pruned. So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQCtrlVlanFlag as localswitch.
1.3.6.1.4.1.2011.5.25.116.2.11.1.4INTEGER {rtprotocolenable(1), original(2), localswitch(3)}read-createcurrent
hwQinQCtrlVlanRowStatus
OBJECT-TYPE
This table can be created and deleted.
1.3.6.1.4.1.2011.5.25.116.2.11.1.5RowStatusread-createcurrent
hwQinQFlexibleFlag
OBJECT-TYPE
The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable), the flexible attribute enabled; So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag as flexibleenable.
1.3.6.1.4.1.2011.5.25.116.2.11.1.6EnabledStatusread-createcurrent
hwQinQGroupCfgTable
OBJECT-TYPE
The group-management id and group's attributes can be configured in sub interface.
1.3.6.1.4.1.2011.5.25.116.2.12not-accessiblecurrent
hwQinQGroupCfgEntry
OBJECT-TYPE
Group configuration entry.
1.3.6.1.4.1.2011.5.25.116.2.12.1not-accessiblecurrent
hwQinQGroupCfgIfIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.116.2.12.1.1InterfaceIndexnot-accessiblecurrent
hwQinQGroupId
OBJECT-TYPE
Group-management id.
1.3.6.1.4.1.2011.5.25.116.2.12.1.2Integer32 (1..16)not-accessiblecurrent
hwQinQGroupType
OBJECT-TYPE
The type of the group.
1.3.6.1.4.1.2011.5.25.116.2.12.1.3INTEGER {single(1), multi(2)}read-createcurrent
hwQinQGroupStat
OBJECT-TYPE
Whether the statistic function is enabled.
1.3.6.1.4.1.2011.5.25.116.2.12.1.4EnabledStatusread-createcurrent
hwQinQGroupRowStatus
OBJECT-TYPE
This table can be created and deleted.
1.3.6.1.4.1.2011.5.25.116.2.12.1.5RowStatusread-createcurrent
hwQinQAsymmetryCfgTable
OBJECT-TYPE
The table to configure asymmetry attribution of the interface.
1.3.6.1.4.1.2011.5.25.116.2.13not-accessiblecurrent
hwQinQAsymmetryCfgEntry
OBJECT-TYPE
The entry of the asymmetry configure table.
1.3.6.1.4.1.2011.5.25.116.2.13.1not-accessiblecurrent
hwQinQAsymmetryCfgIfIndex
OBJECT-TYPE
Index number of the QinQ-termination interface.
1.3.6.1.4.1.2011.5.25.116.2.13.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfAsymmetry
OBJECT-TYPE
The asymmetry attribution of the QinQ-termination interface.
1.3.6.1.4.1.2011.5.25.116.2.13.1.2INTEGER {symmetry(1), asymmetry(2), transparent(3)}read-writecurrent
hwQinQAsymmetryUserMode
OBJECT-TYPE
The user mode attribute of the QinQ-termination sub interface.
1.3.6.1.4.1.2011.5.25.116.2.13.1.3EnabledStatusread-writecurrent
hwQinQRemarkCfgTable
OBJECT-TYPE
Interface remark config.
1.3.6.1.4.1.2011.5.25.116.2.14not-accessiblecurrent
hwQinQRemarkCfgEntry
OBJECT-TYPE
The entry of the interface remark configuration table.
1.3.6.1.4.1.2011.5.25.116.2.14.1not-accessiblecurrent
hwQinQRemarkCfgIfIndex
OBJECT-TYPE
Index number of the sub interface, which should configure QinQ-termination function first.
1.3.6.1.4.1.2011.5.25.116.2.14.1.1InterfaceIndexnot-accessiblecurrent
hwQinQPriorityRemark
OBJECT-TYPE
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
1.3.6.1.4.1.2011.5.25.116.2.14.1.2INTEGER {specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7), cevid(8), pevid(9)}read-writecurrent
hwBpduTunnelIngressTable
OBJECT-TYPE
The table of bpdu tunnel ingress.
1.3.6.1.4.1.2011.5.25.116.2.15not-accessiblecurrent
hwBpduTunnelIngressEntry
OBJECT-TYPE
The entry of of bpdu tunnel ingress.
1.3.6.1.4.1.2011.5.25.116.2.15.1not-accessiblecurrent
hwBpduTunnelIngressPortIndex
OBJECT-TYPE
Port index in interface.
1.3.6.1.4.1.2011.5.25.116.2.15.1.1Integer32 (1..65535)not-accessiblecurrent
hwBpduTunnelBpduIngressMacIndex
OBJECT-TYPE
bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41
1.3.6.1.4.1.2011.5.25.116.2.15.1.2BpduIndexnot-accessiblecurrent
hwBpduTunnelIngressAddress
OBJECT-TYPE
Group mac address.
1.3.6.1.4.1.2011.5.25.116.2.15.1.3MacAddressread-createcurrent
hwBpduTunnelIngressRowStatus
OBJECT-TYPE
Bpdu tunnek ingress row status.
1.3.6.1.4.1.2011.5.25.116.2.15.1.4RowStatusread-createcurrent
hwBpduTunnelEgressTable
OBJECT-TYPE
The table of bpdu tunnel egress.
1.3.6.1.4.1.2011.5.25.116.2.16not-accessiblecurrent
hwBpduTunnelEgressEntry
OBJECT-TYPE
The entry of bpdu tunnel egress.
1.3.6.1.4.1.2011.5.25.116.2.16.1not-accessiblecurrent
hwBpduTunnelEgressPortIndex
OBJECT-TYPE
Port index in interface.
1.3.6.1.4.1.2011.5.25.116.2.16.1.1Integer32 (1..65535)not-accessiblecurrent
hwBpduTunnelBpduEgressMacIndex
OBJECT-TYPE
Bpdu MAC address list BPDU DMAC protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41.
1.3.6.1.4.1.2011.5.25.116.2.16.1.2BpduIndexnot-accessiblecurrent
hwBpduTunnelEgressAddress
OBJECT-TYPE
Group mac address.
1.3.6.1.4.1.2011.5.25.116.2.16.1.3MacAddressread-createcurrent
hwBpduTunnelEgressRowStatus
OBJECT-TYPE
Row Status.
1.3.6.1.4.1.2011.5.25.116.2.16.1.4RowStatusread-createcurrent
hwBpduTunnelVlanTable
OBJECT-TYPE
The table of port bpdu tunnel.
1.3.6.1.4.1.2011.5.25.116.2.17not-accessiblecurrent
hwBpduTunnelVlanEntry
OBJECT-TYPE
The entry of port bpdu tunnel vlan.
1.3.6.1.4.1.2011.5.25.116.2.17.1not-accessiblecurrent
hwBpduTunnelPortIndex
OBJECT-TYPE
Port index in interface.
1.3.6.1.4.1.2011.5.25.116.2.17.1.1Integer32 (1..65535)not-accessiblecurrent
hwBpduTunnelEnable
OBJECT-TYPE
Bpdu tunnel enable.
1.3.6.1.4.1.2011.5.25.116.2.17.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
hwBpduTunnelVlanListLow
OBJECT-TYPE
Vlan bpdu tunnel in port.
1.3.6.1.4.1.2011.5.25.116.2.17.1.3VlanListread-writecurrent
hwBpduTunnelVlanListHigh
OBJECT-TYPE
Vlan bpdu tunnel in port.
1.3.6.1.4.1.2011.5.25.116.2.17.1.4VlanListread-writecurrent
hwBpduTunnelTable
OBJECT-TYPE
The table of bpdu tunnel.
1.3.6.1.4.1.2011.5.25.116.2.18not-accessiblecurrent
hwBpduTunnelEntry
OBJECT-TYPE
The entry of of bpdu tunnel.
1.3.6.1.4.1.2011.5.25.116.2.18.1not-accessiblecurrent
hwBpduTunnelBpduIndex
OBJECT-TYPE
Bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 (1) 01-80-C2-00-00-01 pauseFrame (2) 01-80-C2-00-00-02 reserved02 (3) 01-80-C2-00-00-03 reserved03 (4) 01-80-C2-00-00-04 reserved04 (5) 01-80-C2-00-00-05 reserved05 (6) 01-80-C2-00-00-06 reserved06 (7) 01-80-C2-00-00-07 reserved07 (8) 01-80-C2-00-00-08 stp02 (9) 01-80-C2-00-00-09 reserved08 (10) 01-80-C2-00-00-0a hgmp (11) 01-80-C2-00-00-0b reserved09 (12) 01-80-C2-00-00-0c reserved10 (13) 01-80-C2-00-00-0d reserved11 (14) 01-80-C2-00-00-0e reserved12 (15) 01-80-C2-00-00-0f reserved13 (16) 01-80-C2-00-00-10 reserved14 (17) 01-80-C2-00-00-11 reserved15 (18) 01-80-C2-00-00-12 reserved16 (19) 01-80-C2-00-00-13 reserved17 (20) 01-80-C2-00-00-14 isisLevel01 (21) 01-80-C2-00-00-15 isisLevel02 (22) 01-80-C2-00-00-16 reserved18 (23) 01-80-C2-00-00-17 reserved19 (24) 01-80-C2-00-00-18 reserved20 (25) 01-80-C2-00-00-19 reserved21 (26) 01-80-C2-00-00-1a reserved22 (27) 01-80-C2-00-00-1b reserved23 (28) 01-80-C2-00-00-1c reserved24 (29) 01-80-C2-00-00-1d reserved25 (30) 01-80-C2-00-00-1e reserved26 (31) 01-80-C2-00-00-1f reserved27 (32) 01-80-C2-00-00-20 gmrp (33) 01-80-C2-00-00-21 gvrp (34) 01-80-C2-00-00-22 reserved28 (35) 01-80-C2-00-00-23 reserved29 (36) 01-80-C2-00-00-24 reserved30 (37) 01-80-C2-00-00-25 reserved31 (38) 01-80-C2-00-00-26 reserved32 (39) 01-80-C2-00-00-27 reserved33 (40) 01-80-C2-00-00-28 reserved34 (41) 01-80-C2-00-00-29 reserved35 (42) 01-80-C2-00-00-2a reserved36 (43) 01-80-C2-00-00-2b reserved37 (44) 01-80-C2-00-00-2c reserved38 (45) 01-80-C2-00-00-2d reserved39 (46) 01-80-C2-00-00-2e reserved40 (47) 01-80-C2-00-00-2f reserved41 (48) 01-80-C2-00-00-02 lacp (49) 01-00-0C-CC-CC-CC cdp (50) 01-00-0C-CC-CC-CC pagp (51) 01-00-0C-CC-CC-CC udld (52) 01-00-0C-CC-CC-CC vtp (53) .
1.3.6.1.4.1.2011.5.25.116.2.18.1.1BpduIndexnot-accessiblecurrent
hwBpduTunnelBpduEnable
OBJECT-TYPE
Bpdu tunnel enable or disable.
1.3.6.1.4.1.2011.5.25.116.2.18.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
hwBpduTunnelMultiAddress
OBJECT-TYPE
Group MAC address.
1.3.6.1.4.1.2011.5.25.116.2.18.1.3MacAddressread-createcurrent
hwBpduTunnelRowStatus
OBJECT-TYPE
Row Status.
1.3.6.1.4.1.2011.5.25.116.2.18.1.4RowStatusread-createcurrent
hwQinQSwapCfgTable
OBJECT-TYPE
This table describes the vlan swap configurations of interfaces.
1.3.6.1.4.1.2011.5.25.116.2.19not-accessiblecurrent
hwQinQSwapCfgEntry
OBJECT-TYPE
An entry is created for each active ethernet type interface in the device and deleted when the interface been not exist.
1.3.6.1.4.1.2011.5.25.116.2.19.1not-accessiblecurrent
hwQinQSwapCfgIfIndex
OBJECT-TYPE
Index number of the interface.
1.3.6.1.4.1.2011.5.25.116.2.19.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSwapCfgFlag
OBJECT-TYPE
QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags.
1.3.6.1.4.1.2011.5.25.116.2.19.1.2EnabledStatusread-writecurrent
hwQinQSubIfMapTable
OBJECT-TYPE
The table is used to configure QinQ-mapping function in sub interface, then packets transmitted from this sub interface input with one or two tags will be mapped to other tag or tags.
1.3.6.1.4.1.2011.5.25.116.2.20not-accessiblecurrent
hwQinQSubIfMapEntry
OBJECT-TYPE
The entry of an interface enabled the QinQ-Map function.
1.3.6.1.4.1.2011.5.25.116.2.20.1not-accessiblecurrent
hwQinQSubIfMapIfIndex
OBJECT-TYPE
Index number of the QinQ-Map interface.
1.3.6.1.4.1.2011.5.25.116.2.20.1.1InterfaceIndexnot-accessiblecurrent
hwQinQSubIfPEVlan
OBJECT-TYPE
Outer vlan id of the packets which have two tags before being Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.2Integer32 (0..4094)not-accessiblecurrent
hwQinQSubIfCEVlanStart
OBJECT-TYPE
Inner start vlan id of the packets which have two tags before being Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.3Integer32 (1..4094)not-accessiblecurrent
hwQinQSubIfCEVlanEnd
OBJECT-TYPE
Inner end vlan id of the packets which have two tags before being Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.4Integer32 (1..4094)read-createcurrent
hwQinQSubIfPEVlanMap
OBJECT-TYPE
Outer vlan id of the packets which have two tags after being Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.5Integer32 (0..4094)read-createcurrent
hwQinQSubIfPEEtherType
OBJECT-TYPE
EtherType of Pe Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.6Unsigned32 (1536..65535)read-createcurrent
hwQinQSubIfCEVlanMap
OBJECT-TYPE
Inner vlan id of the packets which have two tags after being Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.7Integer32 (1..4094)read-createcurrent
hwQinQSubIfCEEtherType
OBJECT-TYPE
EtherType of Ce Mapped.
1.3.6.1.4.1.2011.5.25.116.2.20.1.8Unsigned32 (1536..65535)read-createcurrent
hwQinQSubIfMapGroupId
OBJECT-TYPE
Group-management id.
1.3.6.1.4.1.2011.5.25.116.2.20.1.9Integer32 (0..16)read-createcurrent
hwQinQSubIfMapPe8021p
OBJECT-TYPE
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
1.3.6.1.4.1.2011.5.25.116.2.20.1.10INTEGER {specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7)}read-writecurrent
hwQinQSubIfMapCe8021p
OBJECT-TYPE
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
1.3.6.1.4.1.2011.5.25.116.2.20.1.11INTEGER {specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7)}read-writecurrent
hwQinQSubIfMapCetoPeFlag
OBJECT-TYPE
The service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable), the 8021p CetoPeenable attribute enabled.
1.3.6.1.4.1.2011.5.25.116.2.20.1.12EnabledStatusread-createcurrent
hwQinQSubIfMapRowStatus
OBJECT-TYPE
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfMapTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfMapTable.
1.3.6.1.4.1.2011.5.25.116.2.20.1.13RowStatusread-createcurrent
hwQinQStackingVlanCfgTable
OBJECT-TYPE
QinQ Stacking Vlan configuration table.
1.3.6.1.4.1.2011.5.25.116.2.21not-accessiblecurrent
hwQinQStackingVlanCfgEntry
OBJECT-TYPE
This object indicates the configuration table for QinQ Stacking Vlan.
1.3.6.1.4.1.2011.5.25.116.2.21.1not-accessiblecurrent
hwQinQStackingVlanCfgIfIndex
OBJECT-TYPE
This object indicates the Index number of the vlanif interface.
1.3.6.1.4.1.2011.5.25.116.2.21.1.1InterfaceIndexnot-accessiblecurrent
hwQinQStackingVlanCfgVlanId
OBJECT-TYPE
This object indicates the outer vlan id for QinQ Stacking Vlan.
1.3.6.1.4.1.2011.5.25.116.2.21.1.2VlanIdread-createcurrent
hwQinQStackingVlanCfgRowStatus
OBJECT-TYPE
This object indicates the RowStatus of hwQinQStackingVlanTable.
1.3.6.1.4.1.2011.5.25.116.2.21.1.50RowStatusread-createcurrent
hwQinQConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.116.3
hwQinQGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.116.3.1
hwQinQCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.116.3.2

Conformance

NameOIDStatus
hwQinQSystemBaseGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the system.
1.3.6.1.4.1.2011.5.25.116.3.1.1current
hwQinQBpduTunnelGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the interface.
1.3.6.1.4.1.2011.5.25.116.3.1.2current
hwQinQSubIfVlanStackingGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the sub interface.
1.3.6.1.4.1.2011.5.25.116.3.1.3current
hwQinQSubIfStackingStatGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the sub interface.
1.3.6.1.4.1.2011.5.25.116.3.1.4current
hwQinQSubIfTermGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the sub interface.
1.3.6.1.4.1.2011.5.25.116.3.1.5current
hwQinQSubIfTermStatGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the sub interface.
1.3.6.1.4.1.2011.5.25.116.3.1.6current
hwQinQStaticARPCfgGroup
OBJECT-GROUP
A collection of items of static ARP table.
1.3.6.1.4.1.2011.5.25.116.3.1.7current
hwQinQStaticMACCfgGroup
OBJECT-GROUP
A collection of items of static MAC table.
1.3.6.1.4.1.2011.5.25.116.3.1.8current
hwQinQSubIfDot1qTermGroup
OBJECT-GROUP
A collection of items of Dot1q-termination table.
1.3.6.1.4.1.2011.5.25.116.3.1.9current
hwQinQSubIfDot1qTermStatGroup
OBJECT-GROUP
A collection of items of Dot1q-termination statistic table.
1.3.6.1.4.1.2011.5.25.116.3.1.10current
hwQinQModeCfgGroup
OBJECT-GROUP
A collection of items of Mode config table.
1.3.6.1.4.1.2011.5.25.116.3.1.11current
hwQinQCtrlVlanCfgGroup
OBJECT-GROUP
A collection of items of Control vlan table.
1.3.6.1.4.1.2011.5.25.116.3.1.12current
hwQinQGroupCfgGroup
OBJECT-GROUP
A collection of items of group table.
1.3.6.1.4.1.2011.5.25.116.3.1.13current
hwQinQAsymmetryCfgGroup
OBJECT-GROUP
A collection of items of asymmetry config table.
1.3.6.1.4.1.2011.5.25.116.3.1.14current
hwQinQRemarkCfgGroup
OBJECT-GROUP
A collection of items of Mode config table.
1.3.6.1.4.1.2011.5.25.116.3.1.15current
hwBpduTunnelIngressGroup
OBJECT-GROUP
A collection of items of Group Mac table.
1.3.6.1.4.1.2011.5.25.116.3.1.16current
hwBpduTunnelEgressGroup
OBJECT-GROUP
A collection of items of Group Mac table.
1.3.6.1.4.1.2011.5.25.116.3.1.17current
hwBpduTunnelVlanGroup
OBJECT-GROUP
A collection of items of Mode port bpdu tunnel table.
1.3.6.1.4.1.2011.5.25.116.3.1.18current
hwBpduTunnelGroup
OBJECT-GROUP
A collection of items of bpdu tunnel mac table.
1.3.6.1.4.1.2011.5.25.116.3.1.19current
hwQinQSwapCfgGroup
OBJECT-GROUP
A collection of items of Swap config table.
1.3.6.1.4.1.2011.5.25.116.3.1.20current
hwQinQSubIfMapGroup
OBJECT-GROUP
A collection of objects providing device level control and status information for the sub interface.
1.3.6.1.4.1.2011.5.25.116.3.1.21current
hwQinQStackingVlanCfgGroup
OBJECT-GROUP
A collection of items of QinQ Stacking Vlan config table.
1.3.6.1.4.1.2011.5.25.116.3.1.22current
hwQinQCompliance
MODULE-COMPLIANCE
The core compliance statement for all implementations.
1.3.6.1.4.1.2011.5.25.116.3.2.1current