MIBs Depot

HUAWEI-PWE3-MIB

Registered at
1.3.6.1.4.1.2011.5.25.119
Last updated
2017-08-17 17:24
Organization
Huawei Technologies Co.,Ltd.
Revisions
2017-08-17 17:24, 2016-01-12 18:00, 2015-12-28 17:00, 2015-11-28 16:00, 2015-07-18 16:00, 2015-07-14 16:00, 2015-04-07 16:00, 2014-10-27 16:00, 2014-10-27 16:00, 2014-10-08 16:00, 2014-02-11 16:00, 2013-08-29 11:00, 2013-07-13 11:00, 2013-06-18 11:00
Namespace
huawei
Source file
HUAWEI-PWE3-MIB
Digest
sha256:0a24bd28dc33b8a2a8515f053352dd1e815450e2e370092853874854635181ba

Description

The HUAWEI-PWE3-MIB contains objects to manage PWE3.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-L2VPN-MIBhwL2vpnAcIfCfgTtpHeader, hwL2vpnAcIfEncap, hwL2vpnAcIfEncapStep, hwL2vpnAcIfIndex, hwL2vpnAcIfJitterBufferStep, hwL2vpnAcIfLinkType, hwL2vpnAcIfMaxEncapNum, hwL2vpnAcIfMaxIdleCode, hwL2vpnAcIfMaxJitterBuffer, hwL2vpnAcIfMinEncapNum, hwL2vpnAcIfMinIdleCode, hwL2vpnAcIfMinJitterBuffer, hwL2vpnAcIfPhyType
HUAWEI-MIBhwDatacomm
HUAWEI-VPLS-EXT-MIBHWEnableValue, HWL2VpnStateChangeReason, HWL2VpnVcEncapsType, hwL2vpnTnlType, hwL2vpnTunnelIndex
IF-MIBInterfaceIndexOrZero, ifName
INET-ADDRESS-MIBInetAddressType
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-MIBsysUpTime
SNMPv2-SMIBITS, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-L2VPN-MIB
HUAWEI-MIB
HUAWEI-PWE3-MIB
HUAWEI-VPLS-EXT-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
P-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
VRRP-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.2011.5.25.119.1hwL2VpnVplsExtHUAWEI-VPLS-EXT-MIB
1.3.6.1.4.1.2011.5.25.119.2hwL2VpnKompellaHUAWEI-KOMPELLA-MIB
1.3.6.1.4.1.2011.5.25.119.3hwL2VpnCCCHUAWEI-CCC-MIB
1.3.6.1.4.1.2011.5.25.119.5hwL2VpnPwe3TnlExtHUAWEI-PWE3-TNL-MIB
1.3.6.1.4.1.2011.5.25.119.6hwL2VpnVplsTnlExtHUAWEI-VPLS-TNL-MIB
1.3.6.1.4.1.2011.5.25.119.7hwL2VpnVllStatisticHUAWEI-VLL-STATISTIC-MIB
1.3.6.1.4.1.2011.5.25.119.8hwL2VpnAttributeHUAWEI-L2VPN-MIB

Textual conventions

NameOIDSyntaxAccessStatus
HWL2VpnVcType
TEXTUAL-CONVENTION
The type indicates the type of the LDP PW VC.
current
HWLdpPwStateChangeReason
TEXTUAL-CONVENTION
The type indicates the reason of LDP PW VC's status change: LDP session down (1) AC interface down (2) PSN tunnel state down (3) Mapping message not received (4) PW interface parameter not match (5) Notification not forwarding (6)
current

Objects

NameOIDSyntaxAccessStatus
hwL2Vpn
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119
hwPwe3MIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1
hwPwe3Objects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.1
hwPWVcTable
OBJECT-TYPE
This table is the VC configuration table. Users can create or delete a VC by it.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1not-accessiblecurrent
hwPWVcEntry
OBJECT-TYPE
Provides the information of a VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1not-accessiblecurrent
hwPWVcID
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1Unsigned32not-accessiblecurrent
hwPWVcType
OBJECT-TYPE
The type of the Virtual Circuit.This value indicate the service to be carried over this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2HWL2VpnVcEncapsTypenot-accessiblecurrent
hwPWVcPeerAddrType
OBJECT-TYPE
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3InetAddressTyperead-createcurrent
hwPWVcPeerAddr
OBJECT-TYPE
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcPeerAddrType is 'unknown').
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4IpAddressread-createcurrent
hwPWVcStatus
OBJECT-TYPE
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5INTEGER {up(1), down(2), plugout(3), backup(4)}read-onlycurrent
hwPWVcInboundLabel
OBJECT-TYPE
The value of this object identifies the incoming label value of a PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6Unsigned32read-createcurrent
hwPWVcOutboundLabel
OBJECT-TYPE
The value of this object identifies the outgoing label value of a PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7Unsigned32read-createcurrent
hwPWVcSwitchSign
OBJECT-TYPE
This object indicates the type of a switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8INTEGER {staticTostatic(1), ldpTostatic(2), ldpToldp(3), upe(4)}read-onlycurrent
hwPWVcSwitchID
OBJECT-TYPE
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9Unsigned32read-createcurrent
hwPWVcSwitchPeerAddrType
OBJECT-TYPE
Denotes the address type of the peer node of the switch PW. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10InetAddressTyperead-createcurrent
hwPWVcSwitchPeerAddr
OBJECT-TYPE
This object contain the value of the peer node address of the switch PW of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcSwitchPeerAddrType is 'unknown').
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11IpAddressread-createcurrent
hwPWVcSwitchInboundLabel
OBJECT-TYPE
The value of this object identifies the incoming label value of a switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12Unsigned32read-createcurrent
hwPWVcSwitchOutboundLabel
OBJECT-TYPE
The value of this object identifies the outgoing label value of a switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13Unsigned32read-createcurrent
hwPWVcGroupID
OBJECT-TYPE
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14Unsigned32read-createcurrent
hwPWVcIfIndex
OBJECT-TYPE
Index of the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15InterfaceIndexOrZeroread-createcurrent
hwPWVcAcStatus
OBJECT-TYPE
Local AC status. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16INTEGER {up(1), down(2), plugout(3), notify(4), notifyDown(5), downNotify(6)}read-onlycurrent
hwPWVcACOAMStatus
OBJECT-TYPE
Denotes the AC's protocol is operational or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17INTEGER {up(1), down(2)}read-onlycurrent
hwPWVcMtu
OBJECT-TYPE
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18Integer32 (0 | 46..9600)read-createcurrent
hwPWVcCtrlWord
OBJECT-TYPE
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19HWEnableValueread-createcurrent
hwPWVcVCCV
OBJECT-TYPE
The value of this object identifies the VCCV value of a PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20Bits {ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5), ccTtl(6)}read-createcurrent
hwPWVcBandWidth
OBJECT-TYPE
This object indicates the bandwidth. '0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21Unsigned32 (0..32000000)read-createcurrent
hwPWVcMaxAtmCells
OBJECT-TYPE
Indicates the max cell supported when vc type is atm.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22Unsigned32 (0..28)read-createcurrent
hwPWVcTnlPolicyName
OBJECT-TYPE
Indicates the tunnel policy name used.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23OCTET STRING (SIZE(0..39))read-createcurrent
hwPWVcQoSBehaviorIndex
OBJECT-TYPE
Indicates the traffic behavior Index when QOS is implemented. Currently,can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24Unsigned32read-createcurrent
hwPWVcExplicitPathName
OBJECT-TYPE
Indicates the explicit path name set by the operator.Currently, can't support.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25DisplayString (SIZE(0..31))read-createcurrent
hwPWVcTemplateName
OBJECT-TYPE
Indicates the PW template index referenced.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26OCTET STRING (SIZE(0..19))read-createcurrent
hwPWVcSecondary
OBJECT-TYPE
Indicates whether or not the secondary PW is used.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27TruthValueread-createcurrent
hwPWVcUpTime
OBJECT-TYPE
Indicates the duration when the PW keeps Up for the last time, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28Unsigned32read-onlycurrent
hwPWOAMSync
OBJECT-TYPE
This object indicates whether OAM mapping is enabled.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29TruthValueread-createcurrent
hwPWVCForBfdIndex
OBJECT-TYPE
The index of PW for BFD.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30Unsigned32read-onlycurrent
hwPWVcDelayTime
OBJECT-TYPE
The reroute delay time.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31Unsigned32read-createcurrent
hwPWVcReroutePolicy
OBJECT-TYPE
Reroute policy.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32INTEGER {delay(1), immediately(2), never(3), none(4), err(5), invalid(6), immediatelySwitch(7)}read-createcurrent
hwPWVcResumeTime
OBJECT-TYPE
The reroute resume time.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33Unsigned32read-createcurrent
hwPWVcRerouteReason
OBJECT-TYPE
Last reroute reason.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34HWL2VpnStateChangeReasonread-onlycurrent
hwPWVcLastRerouteTime
OBJECT-TYPE
Last reroute time.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35Unsigned32read-onlycurrent
hwPWVcManualSetFault
OBJECT-TYPE
This object indicates that faults on the primary or secondary PW are manually simulated.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36TruthValueread-createcurrent
hwPWVcActive
OBJECT-TYPE
Denotes the current vc is active or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37TruthValueread-onlycurrent
hwPWVcVrIfIndex
OBJECT-TYPE
The value of this object identifies the index of the AC interface bound to a management VRRP backup group.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38InterfaceIndexOrZeroread-createcurrent
hwPWVcVrID
OBJECT-TYPE
The value of this object identifies the ID of a management VRRP backup group.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39Unsigned32 (0..255)read-createcurrent
hwPWBFDDetectMultiplier
OBJECT-TYPE
The multiple of detection time.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40Unsigned32 (0 | 3..50)read-createcurrent
hwPWBFDMinReceiveInterval
OBJECT-TYPE
The value of this object identifies the minimum interval at which dynamic BFD packets are received.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41Unsigned32 (0 | 3..1000)read-createcurrent
hwPWBFDMinTransmitInterval
OBJECT-TYPE
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42Unsigned32 (0 | 3..1000)read-createcurrent
hwPWDynamicBFDDetect
OBJECT-TYPE
This value indicates the capacitability to support dynamic BFD detect.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43TruthValueread-createcurrent
hwPWBFDRemoteVcID
OBJECT-TYPE
The value of this object identifies the VC ID of the peer PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44Unsigned32 (0..4294967295)read-createcurrent
hwPWEthOamType
OBJECT-TYPE
This value indicates the type of ETH OAM.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45INTEGER {ethOam1ag(1), ethOam3ah(2), noEthOamCfg(3)}read-createcurrent
hwPWCfmMaIndex
OBJECT-TYPE
This value indicates the current CFM MA index.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46Unsigned32 (0..4095 | 4294967295)read-onlycurrent
hwPWVcUpStartTime
OBJECT-TYPE
Specifies the time this PW status was Up(1).
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47DisplayString (SIZE(0..63))read-onlycurrent
hwPWVcUpSumTime
OBJECT-TYPE
Indicates the accumulated time when the VC is Up, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48Unsigned32read-onlycurrent
hwPWVcIfName
OBJECT-TYPE
Name of the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49DisplayString (SIZE(0..63))read-onlycurrent
hwPWVcRowStatus
OBJECT-TYPE
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51RowStatusread-createcurrent
hwPWVcAtmPackOvertime
OBJECT-TYPE
The value of this object identifies the ATM cell encapsulation period.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52Unsigned32 (0 | 100..50000)read-createcurrent
hwPWVcPwJitterBufferDepth
OBJECT-TYPE
The value of this object identifies the jitter buffer depth for TDMoPSN.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53Unsigned32 (0..64)read-createcurrent
hwPWVcPwTdmEncapsulationNum
OBJECT-TYPE
The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54Unsigned32 (0..40)read-createcurrent
hwPWVcPwIdleCode
OBJECT-TYPE
The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55Unsigned32 (0..255 | 65535)read-createcurrent
hwPWVcPwRtpHeader
OBJECT-TYPE
This object indicates the RTP header carried in a transparently transmitted TDM frame.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56Unsigned32read-createcurrent
hwPWVcSwitchTnlPolicyName
OBJECT-TYPE
This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57OCTET STRING (SIZE(0..39))read-createcurrent
hwPWVcCfmMdIndex
OBJECT-TYPE
This value indicates the current CFM MD index.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58Unsigned32 (0..4095 | 4294967295)read-onlycurrent
hwPWVcCfmMaName
OBJECT-TYPE
This value indicates the current CFM MA name used.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59OCTET STRING (SIZE(0..43))read-createcurrent
hwPWVcCfmMdName
OBJECT-TYPE
This value indicates the current CFM MD name used.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60OCTET STRING (SIZE(0..43))read-createcurrent
hwPWVcRawOrTagged
OBJECT-TYPE
Specifies whether the raw or tagged is configured.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61INTEGER {raw(1), tagged(2), rawTagNotConfiged(3)}read-onlycurrent
hwPWVcInterworkingType
OBJECT-TYPE
Specifies the interworking type of the VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62INTEGER {ipInterWorking(1), ipLayer2(2), ipUnknown(3)}read-onlycurrent
hwPWVcCir
OBJECT-TYPE
Specifies the committed information rate, based on the VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63Unsigned32read-createcurrent
hwPWVcPir
OBJECT-TYPE
Specifies the peak information rate, based on the VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64Unsigned32read-createcurrent
hwPWVcQosProfile
OBJECT-TYPE
Specifies the QoS profile's name, based on the VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65DisplayString (SIZE(0..63))read-createcurrent
hwPWVcSwitchCir
OBJECT-TYPE
Specifies the committed information rate, based on the switch VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66Unsigned32read-createcurrent
hwPWVcSwitchPir
OBJECT-TYPE
Specifies the peak information rate, based on the switch VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67Unsigned32read-createcurrent
hwPWVcSwitchQosProfile
OBJECT-TYPE
Specifies the QoS profile's name, based on the switch VC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68DisplayString (SIZE(0..63))read-createcurrent
hwPWVcTrigger
OBJECT-TYPE
Specifies whether the PW remote interface shutdown or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69TruthValueread-createcurrent
hwPWVcEnableACOAM
OBJECT-TYPE
Specifies whether ACOAM detection and notification are all enabled or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70EnabledStatusread-createcurrent
hwPWVcSwitchVrIfIndex
OBJECT-TYPE
Denotes the VRRP interface the switch PW binding to.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71InterfaceIndexOrZeroread-createcurrent
hwPWVcSwitchVrID
OBJECT-TYPE
Denotes the VrID the switch PW binding to.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72Unsigned32 (0..255)read-createcurrent
hwPWVcQosParaFromPWT
OBJECT-TYPE
This object indicates the configuration of the Qos parameters managed through command line or PW template.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73INTEGER {cliOrMib(1), pwTemplate(2), unknown(3)}read-onlycurrent
hwPWVcBfdParaFromPWT
OBJECT-TYPE
This object indicates the configuration of the Bfd parameters managed through command line or PW template.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74INTEGER {cliOrMib(1), pwTemplate(2), unknown(3)}read-onlycurrent
hwPwVcNegotiateMode
OBJECT-TYPE
This object indicates the negotiation mode of the PW on the local node.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75INTEGER {slaveOrMaster(1), independent(2), unknown(3), frr(4)}read-createcurrent
hwPwVcIsBypass
OBJECT-TYPE
This object indicates whether the PW is the bypass PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76TruthValueread-createcurrent
hwPwVcIsAdmin
OBJECT-TYPE
This object indicates whether the PW is the administrator PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77TruthValueread-createcurrent
hwPwVcAdminPwIfIndex
OBJECT-TYPE
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78InterfaceIndexOrZeroread-createcurrent
hwPwVcAdminPwLinkStatus
OBJECT-TYPE
This object indicates the status of the administrator PW after it is being tracked by the service PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
hwPwVcSwitchAdminPwIfIndex
OBJECT-TYPE
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80InterfaceIndexOrZeroread-createcurrent
hwPwVcSwitchAdminPwLinkStatus
OBJECT-TYPE
This object indicates the status of the administrator PW after it is being tracked by the switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
hwPwVcSwitchBackupAdminPwIfIndex
OBJECT-TYPE
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82InterfaceIndexOrZeroread-createcurrent
hwPwVcSwitchBackupAdminPwLinkStatus
OBJECT-TYPE
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83INTEGER {up(1), down(2), unknown(3)}read-onlycurrent
hwPwVcSwitchBackupVcId
OBJECT-TYPE
This object indicates the VC ID of the switch backup PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84Unsigned32read-createcurrent
hwPwVcSwitchBackupVcPeerAddrType
OBJECT-TYPE
This object indicates type of the IP address of the peer on the switch backup PW. Currently, only IPv4 addresss are supported.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85InetAddressTyperead-onlycurrent
hwPwVcSwitchBackupVcPeerAddr
OBJECT-TYPE
This object indicates the IP address of the peer on the switch backup PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86IpAddressread-createcurrent
hwPwVcSwitchBackupVcReceiveLabel
OBJECT-TYPE
This object indicates the inbound label of the switch backup VC. For a static VC, the value of the inbound label ranges from 16 to 1023. For a dynamic VC, the inbound label is automatically generated by the system.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87Unsigned32read-onlycurrent
hwPwVcSwitchBackupVcSendLabel
OBJECT-TYPE
This object indicates the outbound label of the switch backup VC. For a static VC, the value of the outbound label ranges from 0 to 1048575. For a dynamic VC, the outbound label is automatically generated by the system.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88Unsigned32read-onlycurrent
hwPwVcSwitchBackupVcTnlPolicyName
OBJECT-TYPE
This object indicates the name of the tunnel policy of the switch backup VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89OCTET STRING (SIZE(0..19))read-createcurrent
hwPwVcSwitchBackupVcCir
OBJECT-TYPE
This object indicates the CIR of the switch backup VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90Unsigned32read-createcurrent
hwPwVcSwitchBackupVcPir
OBJECT-TYPE
This object indicates the PIR of the switch backup VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91Unsigned32read-createcurrent
hwPwVcSwitchBackupVcQosProfile
OBJECT-TYPE
This object indicates the name of the QoS profile of the switch backup VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92DisplayString (SIZE(0..63))read-createcurrent
hwPwVcSlaveMasterMode
OBJECT-TYPE
This object indicates whether the status of the VC is master or slave.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93INTEGER {slave(1), master(2), unknown(3), bypass(4)}read-onlycurrent
hwPwVcSwitchVcSlaveMasterMode
OBJECT-TYPE
This object indicates whether the status of the switch VC is master or slave.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94INTEGER {slave(1), master(2), unknown(3)}read-onlycurrent
hwPwVcSwitchBackupVcSlaveMasterMode
OBJECT-TYPE
This object indicates whether the status of the switch backup VC is master or slave.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95INTEGER {slave(1), master(2), unknown(3)}read-onlycurrent
hwPwVcSwitchVcActive
OBJECT-TYPE
This object indicates whether the status of the switch VC is active or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96TruthValueread-onlycurrent
hwPwVcSwitchBackupVcActive
OBJECT-TYPE
This object indicates whether the status of the switch backup VC is active or not.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97TruthValueread-onlycurrent
hwPwVcSwitchCwTrans
OBJECT-TYPE
This object indicates whether the SPE support Control Word Transparent or not,default is false.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98TruthValueread-createcurrent
hwPwVcSwitchVcServiceName
OBJECT-TYPE
This object indicates the service name of the switch VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99OCTET STRING (SIZE(0..100))read-createcurrent
hwPwVcSwitchBackupVcServiceName
OBJECT-TYPE
This object indicates the service name of the switch backup VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100OCTET STRING (SIZE(0..100))read-createcurrent
hwPWVcTnlTable
OBJECT-TYPE
This table is used to search the tunnel index of a VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.2not-accessiblecurrent
hwPWVcTnlEntry
OBJECT-TYPE
Provides the information of a VC tunnel entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1not-accessiblecurrent
hwPWVcTnlIndex
OBJECT-TYPE
This object indicates the tunnel index of the VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.1Unsigned32not-accessiblecurrent
hwPWVcTnlType
OBJECT-TYPE
This object indicates the tunnel type.
1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.2INTEGER {lsp(1), gre(2), ipsec(3), crLsp(4)}read-onlycurrent
hwPWTnlForBfdIndex
OBJECT-TYPE
This object indicates the index of LSP for BFD.
1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.3Unsigned32read-onlycurrent
hwPWVcStatisticsTable
OBJECT-TYPE
This table contains the Pwe3's VC packets statistics.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3not-accessiblecurrent
hwPWVcStatisticsEntry
OBJECT-TYPE
Provides the information of the Pwe3's VC packets statistics.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1not-accessiblecurrent
hwPWVcStatisticsRcvPkts
OBJECT-TYPE
The total number of packets received on this VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.1Counter64read-onlycurrent
hwPWVcStatisticsRcvBytes
OBJECT-TYPE
The total number of bytes received on this VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.2Counter64read-onlycurrent
hwPWVcStatisticsSndPkts
OBJECT-TYPE
The total number of packets sent on this VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.3Counter64read-onlycurrent
hwPWVcStatisticsSndBytes
OBJECT-TYPE
The total number of bytes sent on the VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.4Counter64read-onlycurrent
hwPWRemoteVcTable
OBJECT-TYPE
This table provides remote PW information for each local PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4not-accessiblecurrent
hwPWRemoteVcEntry
OBJECT-TYPE
An entry in this table is created by the agent for every PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1not-accessiblecurrent
hwPWRemoteVcID
OBJECT-TYPE
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1Unsigned32read-onlycurrent
hwPWRemoteVcType
OBJECT-TYPE
This value indicate the service to be carried over the remote PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2HWL2VpnVcEncapsTyperead-onlycurrent
hwPWRemoteVcStatus
OBJECT-TYPE
Indicates the forwarding status of the remote VC.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3INTEGER {up(1), down(2), plugout(3)}read-onlycurrent
hwPWRemoteVcGroupID
OBJECT-TYPE
Indicates the Group ID field of the remote PW. Currently, this value always be zero.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4Unsigned32read-onlycurrent
hwPWRemoteVcMtu
OBJECT-TYPE
Indicates the supported MTU size of the remote PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5Unsigned32 (0 | 46..9600)read-onlycurrent
hwPWRemoteVcCtrlword
OBJECT-TYPE
Indicates the control word capability of the remote PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6HWEnableValueread-onlycurrent
hwPWRemoteVcMaxAtmCells
OBJECT-TYPE
Indicates the max cell supported of the remote PW when vctype is atm.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7Unsigned32 (0..65535)read-onlycurrent
hwPWRemoteVcNotif
OBJECT-TYPE
Indicates notification is supported by the remote PW.
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8TruthValueread-onlycurrent
hwPWVcSwitchNotifEnable
OBJECT-TYPE
If this object is set to enable(1), then it enables the emission of hwPWVcSwitchWtoP and hwPWVcSwitchPtoW notifications; otherwise these notifications are not emitted. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.1.5HWEnableValueread-writecurrent
hwPWVcUpDownNotifEnable
OBJECT-TYPE
This object indicates the enable sign of PW VC state change notification. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.1.6HWEnableValueread-writecurrent
hwPWVcDeletedNotifEnable
OBJECT-TYPE
This object indicates the enable sign of PW VC deletion notification. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.1.7HWEnableValueread-writecurrent
hwPWVcStateChangeReason
OBJECT-TYPE
This object indicates the cause of the VC status change.
1.3.6.1.4.1.2011.5.25.119.4.1.1.8HWL2VpnStateChangeReasonaccessible-for-notifycurrent
hwPWVcSwitchRmtID
OBJECT-TYPE
This object indicates the VC ID of PW switch between working PW and protect PW .
1.3.6.1.4.1.2011.5.25.119.4.1.1.9Unsigned32accessible-for-notifycurrent
hwLdpPWStateChangeReason
OBJECT-TYPE
This object indicates the reason of LDP PW VC's state change.
1.3.6.1.4.1.2011.5.25.119.4.1.1.10HWLdpPwStateChangeReasonaccessible-for-notifycurrent
hwPWVcTDMPerfCurrentTable
OBJECT-TYPE
This table provides per TDM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11not-accessiblecurrent
hwPWVcTDMPerfCurrentEntry
OBJECT-TYPE
An entry in this table is created by the agent for every TDM PW entry.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1not-accessiblecurrent
hwPWVcTDMPerfCurrentMissingPkts
OBJECT-TYPE
Number of missing packets (as detected via control word sequence number gaps).
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.1Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentJtrBfrOverruns
OBJECT-TYPE
Number of times the jitter buffer was overrun.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.2Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentJtrBfrUnderruns
OBJECT-TYPE
Number of times a packet needed to be played out and the jitter buffer was empty.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.3Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentMisOrderDropped
OBJECT-TYPE
Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.4Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentMalformedPkt
OBJECT-TYPE
Number of packets detected with unexpected size or bad headers' stack.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.5Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentESs
OBJECT-TYPE
The counter associated with the number of Error Seconds encountered. Any malformed packet, sequence error, LOPS, and the like are considered as Error Seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.6Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentSESs
OBJECT-TYPE
The counter associated with the number of Severely Error Seconds encountered.
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.7Unsigned32read-onlycurrent
hwPWVcTDMPerfCurrentUASs
OBJECT-TYPE
The counter associated with the number of Unavailable Seconds encountered. Any consecutive ten seconds of SES are counted as one Unavailable Seconds (UAS).
1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.8Unsigned32read-onlycurrent
hwPwe3MIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.2
hwSvcObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.3
hwSvcTable
OBJECT-TYPE
This table is the SVC configuration table. Users can create or delete a SVC by it.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1not-accessiblecurrent
hwSvcEntry
OBJECT-TYPE
Provides the information of a SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1not-accessiblecurrent
hwSvcIfIndex
OBJECT-TYPE
Index of the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1InterfaceIndexOrZeronot-accessiblecurrent
hwSvcID
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2Unsigned32read-createcurrent
hwSvcType
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3HWL2VpnVcEncapsTyperead-createcurrent
hwSvcPeerAddrType
OBJECT-TYPE
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4InetAddressTyperead-createcurrent
hwSvcPeerAddr
OBJECT-TYPE
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwSvcPeerAddrType is 'unknown').
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5IpAddressread-createcurrent
hwSvcStatus
OBJECT-TYPE
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6INTEGER {up(1), down(2), plugout(3)}read-onlycurrent
hwSvcInboundLabel
OBJECT-TYPE
This object indicates the inbound label.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7Unsigned32read-createcurrent
hwSvcOutboundLabel
OBJECT-TYPE
This object indicates the outbound label.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8Unsigned32read-createcurrent
hwSvcGroupID
OBJECT-TYPE
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if SvcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9Unsigned32read-onlycurrent
hwSvcAcStatus
OBJECT-TYPE
Local AC status. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10INTEGER {up(1), down(2), plugout(3)}read-onlycurrent
hwSvcACOAMStatus
OBJECT-TYPE
Denotes the AC's protocol is operational or not.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11INTEGER {up(1), down(2)}read-onlycurrent
hwSvcMtu
OBJECT-TYPE
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.Currently, can't support.'0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12Integer32 (0 | 46..9600)read-onlycurrent
hwSvcCtrlWord
OBJECT-TYPE
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13HWEnableValueread-createcurrent
hwSvcVCCV
OBJECT-TYPE
Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) or ccAlert(1)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|cvLspping(4)|cvBfd(5).
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14Bits {ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5)}read-createcurrent
hwSvcBandWidth
OBJECT-TYPE
This object indicates the bandwidth.Currently, can't support.'0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15Unsigned32 (0..32000000)read-createcurrent
hwSvcMaxAtmCells
OBJECT-TYPE
Indicates the max cell supported when vc type is atm.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16Unsigned32 (0..28)read-createcurrent
hwSvcTnlPolicyName
OBJECT-TYPE
Indicates the tunnel policy name used.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17OCTET STRING (SIZE(0..39))read-createcurrent
hwSvcQoSBehaviorIndex
OBJECT-TYPE
Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18Unsigned32read-createcurrent
hwSvcPWTemplateName
OBJECT-TYPE
Indicates the PW template index referenced.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19OCTET STRING (SIZE(0..19))read-createcurrent
hwSvcUpTime
OBJECT-TYPE
Indicates the duration when the SVC keeps Up for the last time, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20Unsigned32read-onlycurrent
hwSvcOAMSync
OBJECT-TYPE
Denotes the AC and PSN are enable or not.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21TruthValueread-onlycurrent
hwSvcForBfdIndex
OBJECT-TYPE
The index of PW for BFD.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22Unsigned32read-onlycurrent
hwSvcSecondary
OBJECT-TYPE
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23TruthValueread-createcurrent
hwSvcDelayTime
OBJECT-TYPE
The reroute delay time.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24Unsigned32read-onlycurrent
hwSvcReroutePolicy
OBJECT-TYPE
Reroute policy.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25INTEGER {delay(1), immediately(2), never(3), none(4), err(5), invalid(6)}read-onlycurrent
hwSvcResumeTime
OBJECT-TYPE
The reroute resume time.Currently, can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26Unsigned32read-onlycurrent
hwSvcRerouteReason
OBJECT-TYPE
Last reroute reason.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27HWL2VpnStateChangeReasonread-onlycurrent
hwSvcLastRerouteTime
OBJECT-TYPE
Last reroute time.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28Unsigned32read-onlycurrent
hwSvcManualSetFault
OBJECT-TYPE
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29TruthValueread-onlycurrent
hwSvcActive
OBJECT-TYPE
Denotes the current vc is active or not.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30TruthValueread-onlycurrent
hwSvcUpStartTime
OBJECT-TYPE
Specifies the time this PW status was Up(1).
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31DisplayString (SIZE(0..63))read-onlycurrent
hwSvcUpSumTime
OBJECT-TYPE
Indicates the accumulated time when the SVC is Up, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32Unsigned32read-onlycurrent
hwSvcAtmPackOvertime
OBJECT-TYPE
Specifies the AtmPackOvertime.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33Unsigned32 (0 | 100..50000)read-createcurrent
hwSvcPwJitterBufferDepth
OBJECT-TYPE
Specifies the PwJitterBufferDepth.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34Unsigned32 (0..64)read-createcurrent
hwSvcPwTdmEncapsulationNum
OBJECT-TYPE
Specifies the PwTdmEncapsulationNum.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35Unsigned32 (0..40)read-createcurrent
hwSvcPwIdleCode
OBJECT-TYPE
Specifies the PwIdleCode.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36Unsigned32 (0..255 | 65535)read-createcurrent
hwSvcPwRtpHeader
OBJECT-TYPE
Specifies the PwRtpHeader.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37Unsigned32read-createcurrent
hwSvcRawOrTagged
OBJECT-TYPE
Specifies whether the VLAN tag of the SVC entry is attached or stripped.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38INTEGER {raw(1), tagged(2), rawTagNotConfiged(3)}read-createcurrent
hwSvcInterworkingType
OBJECT-TYPE
Specifies the interworking type of the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39INTEGER {ipInterWorking(1), ipLayer2(2), ipUnknown(3)}read-createcurrent
hwSvcCir
OBJECT-TYPE
Specifies the committed information rate, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40Unsigned32read-createcurrent
hwSvcPir
OBJECT-TYPE
Specifies the peak information rate, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41Unsigned32read-createcurrent
hwSvcQosProfile
OBJECT-TYPE
Specifies the QoS profile's name, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42DisplayString (SIZE(0..63))read-createcurrent
hwSvcRowStatus
OBJECT-TYPE
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51RowStatusread-createcurrent
hwSvcTnlTable
OBJECT-TYPE
This table is used to search the tunnel index of a SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.2not-accessiblecurrent
hwSvcTnlEntry
OBJECT-TYPE
Provides the information of a SVC tunnel entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1not-accessiblecurrent
hwSvcTnlIndex
OBJECT-TYPE
This object indicates the tunnel index of the SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.1Unsigned32not-accessiblecurrent
hwSvcTnlType
OBJECT-TYPE
This object indicates the tunnel type.
1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.2INTEGER {lsp(1), gre(2), ipsec(3), crLsp(4)}read-onlycurrent
hwSvcTnlForBfdIndex
OBJECT-TYPE
This object indicates the index of LSP for BFD. Currently, can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.3Unsigned32read-onlycurrent
hwSvcStatisticsTable
OBJECT-TYPE
This table contains the L2vpn's SVC packets statistics.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3not-accessiblecurrent
hwSvcStatisticsEntry
OBJECT-TYPE
Provides the information of the L2VPN's SVC packets Statistics.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1not-accessiblecurrent
hwSvcStatisticsRcvPkts
OBJECT-TYPE
The total number of packets received on this SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.1Counter64read-onlycurrent
hwSvcStatisticsRcvBytes
OBJECT-TYPE
The total number of bytes received on this SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.2Counter64read-onlycurrent
hwSvcStatisticsSndPkts
OBJECT-TYPE
The total number of packets sent on this SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.3Counter64read-onlycurrent
hwSvcStatisticsSndBytes
OBJECT-TYPE
The total number of bytes sent on the SVC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.4Counter64read-onlycurrent
hwSvcSwitchNotifEnable
OBJECT-TYPE
If this object is set to enable(1), then it enables the emission of hwSvcSwitchWtoP and hwSvcSwitchPtoW notifications; otherwise these notifications are not emitted.Currently, can't support. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.3.4HWEnableValueread-writecurrent
hwSvcUpDownNotifEnable
OBJECT-TYPE
This object indicates the enable sign of PW VC state change notification. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.3.5HWEnableValueread-writecurrent
hwSvcDeletedNotifEnable
OBJECT-TYPE
This object indicates the enable sign of PW VC deletion notification. The default value is disable (2).
1.3.6.1.4.1.2011.5.25.119.4.1.3.6HWEnableValueread-writecurrent
hwSvcStateChangeReason
OBJECT-TYPE
This object indicates the reason of PE VC state change.
1.3.6.1.4.1.2011.5.25.119.4.1.3.7HWL2VpnStateChangeReasonaccessible-for-notifycurrent
hwSvcExtTable
OBJECT-TYPE
This table is the SVC configuration extend table. Users can query a SVC by it.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8not-accessiblecurrent
hwSvcExtEntry
OBJECT-TYPE
Provides the information of a SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1not-accessiblecurrent
hwSvcExtIfIndex
OBJECT-TYPE
Index of the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.1InterfaceIndexOrZeronot-accessiblecurrent
hwSvcExtPWType
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the type of the LDP PW VC.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.2HWL2VpnVcTypenot-accessiblecurrent
hwSvcExtID
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.3Unsigned32read-createcurrent
hwSvcExtType
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.4HWL2VpnVcEncapsTyperead-createcurrent
hwSvcExtPeerAddrType
OBJECT-TYPE
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.5InetAddressTyperead-createcurrent
hwSvcExtPeerAddr
OBJECT-TYPE
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwSvcExtPeerAddrType is 'unknown').
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.6IpAddressread-createcurrent
hwSvcExtStatus
OBJECT-TYPE
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.7INTEGER {up(1), down(2), plugout(3)}read-onlycurrent
hwSvcExtInboundLabel
OBJECT-TYPE
This object indicates the inbound label.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.8Unsigned32read-createcurrent
hwSvcExtOutboundLabel
OBJECT-TYPE
This object indicates the outbound label.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.9Unsigned32read-createcurrent
hwSvcExtAcStatus
OBJECT-TYPE
Local AC status. Currently, can't support 'plugout'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.10INTEGER {up(1), down(2), plugout(3)}read-onlycurrent
hwSvcExtACOAMStatus
OBJECT-TYPE
Denotes the AC's protocol is operational or not.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.11INTEGER {up(1), down(2)}read-onlycurrent
hwSvcExtCtrlWord
OBJECT-TYPE
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.12HWEnableValueread-createcurrent
hwSvcExtVCCV
OBJECT-TYPE
Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) or ccAlert(1)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|cvLspping(4)|cvBfd(5).
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.13Bits {ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5)}read-createcurrent
hwSvcExtMaxAtmCells
OBJECT-TYPE
Indicates the max cell supported when vc type is atm.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.14Unsigned32 (0..28)read-createcurrent
hwSvcExtTnlPolicyName
OBJECT-TYPE
Indicates the tunnel policy name used.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.15OCTET STRING (SIZE(0..39))read-createcurrent
hwSvcExtPWTemplateName
OBJECT-TYPE
Indicates the PW template index referenced.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.16OCTET STRING (SIZE(0..19))read-createcurrent
hwSvcExtUpTime
OBJECT-TYPE
Indicates the duration when the SVC keeps Up for the last time, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.17Unsigned32read-onlycurrent
hwSvcExtOAMSync
OBJECT-TYPE
Denotes the AC and PSN are enable or not.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.18TruthValueread-onlycurrent
hwSvcExtForBfdIndex
OBJECT-TYPE
The index of PW for BFD.Currently, can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.19Unsigned32read-onlycurrent
hwSvcExtSecondary
OBJECT-TYPE
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.20TruthValueread-createcurrent
hwSvcExtDelayTime
OBJECT-TYPE
The reroute delay time.Currently, can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.21Unsigned32read-onlycurrent
hwSvcExtReroutePolicy
OBJECT-TYPE
Reroute policy.Currently, can't support.Return the default value is 'invalid(6)'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.22INTEGER {delay(1), immediately(2), never(3), none(4), err(5), invalid(6)}read-onlycurrent
hwSvcExtRerouteReason
OBJECT-TYPE
Last reroute reason.Currently, can't support.Return the default value is 'invalidReason(1)'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.23HWL2VpnStateChangeReasonread-onlycurrent
hwSvcExtLastRerouteTime
OBJECT-TYPE
Last reroute time.Currently, can't support.Return the default value is '0'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.24Unsigned32read-onlycurrent
hwSvcExtManualSetFault
OBJECT-TYPE
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.25TruthValueread-onlycurrent
hwSvcExtActive
OBJECT-TYPE
Denotes the current vc is active or not.Currently, can't support.Return the default value is 'false'.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.26TruthValueread-onlycurrent
hwSvcExtUpStartTime
OBJECT-TYPE
Specifies the time this PW status was Up(1).
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.27DisplayString (SIZE(0..63))read-onlycurrent
hwSvcExtUpSumTime
OBJECT-TYPE
Indicates the accumulated time when the SVC is Up, in seconds.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.28Unsigned32read-onlycurrent
hwSvcExtAtmPackOvertime
OBJECT-TYPE
Specifies the AtmPackOvertime.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.29Unsigned32 (0 | 100..50000)read-createcurrent
hwSvcExtPwJitterBufferDepth
OBJECT-TYPE
Specifies the PwJitterBufferDepth.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.30Unsigned32 (0..64)read-createcurrent
hwSvcExtPwTdmEncapsulationNum
OBJECT-TYPE
Specifies the PwTdmEncapsulationNum.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.31Unsigned32 (0..40)read-createcurrent
hwSvcExtPwIdleCode
OBJECT-TYPE
Specifies the PwIdleCode.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.32Unsigned32 (0..255 | 65535)read-createcurrent
hwSvcExtPwRtpHeader
OBJECT-TYPE
Specifies the PwRtpHeader.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.33Unsigned32read-createcurrent
hwSvcExtRawOrTagged
OBJECT-TYPE
Specifies whether the VLAN tag of the SVC entry is attached or stripped.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.34INTEGER {raw(1), tagged(2), rawTagNotConfiged(3)}read-createcurrent
hwSvcExtInterworkingType
OBJECT-TYPE
Specifies the interworking type of the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.35INTEGER {ipInterWorking(1), ipLayer2(2), ipUnknown(3)}read-createcurrent
hwSvcExtRowStatus
OBJECT-TYPE
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.36RowStatusread-createcurrent
hwSvcExtCir
OBJECT-TYPE
Specifies the committed information rate, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.37Unsigned32read-createcurrent
hwSvcExtPir
OBJECT-TYPE
Specifies the peak information rate, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.38Unsigned32read-createcurrent
hwSvcExtQosProfile
OBJECT-TYPE
Specifies the QoS profile's name, based on the SVC entry.
1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.39DisplayString (SIZE(0..63))read-createcurrent
hwL2vpnSvcMIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.4
hwPWTemplateTable
OBJECT-TYPE
This table specifies information for configuring and status monitoring to PW tempalte.
1.3.6.1.4.1.2011.5.25.119.4.1.5not-accessiblecurrent
hwPWTemplateEntry
OBJECT-TYPE
A row in this table represents a pseudo wire (PW) template. It is indexed by hwPWCmdTemplateIndex, which uniquely identifying a singular tempalte.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1not-accessiblecurrent
hwPWTemplateName
OBJECT-TYPE
The name of the PW template. Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set-up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the PWid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1OCTET STRING (SIZE(0..19))accessible-for-notifycurrent
hwPWTemplatePeerAddrType
OBJECT-TYPE
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2InetAddressTyperead-createcurrent
hwPWTemplatePeerAddr
OBJECT-TYPE
This object contain the value of the peer node address of the PW/PE maintenance protocol entity.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3IpAddressread-createcurrent
hwPWTemplateCtrlword
OBJECT-TYPE
Indicates the control word capability of the switch PW.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4HWEnableValueread-createcurrent
hwPWTemplateVCCV
OBJECT-TYPE
Indicates the optional VCCV capabilities of the PW template. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5).
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5Bits {ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5), ccTtl(6)}read-createcurrent
hwPWTemplateFrag
OBJECT-TYPE
Indicates whether or not fragmentaion is supported.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6TruthValueread-createcurrent
hwPWTemplateBandwidth
OBJECT-TYPE
Indicates the bandwitdh when signaling protocol is rsvp. Currently, can't support.'0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7Integer32 (0..32000000)read-onlycurrent
hwPWTemplateTnlPolicyName
OBJECT-TYPE
Indicates the tunnel policy name used.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8OCTET STRING (SIZE(0..39))read-createcurrent
hwPWTemplateQoSBehaviorIndex
OBJECT-TYPE
Indicates the traffic behavior Index when QOS is implemented.Currently, can't support.'0' is the default value.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9Integer32read-createcurrent
hwPWTemplateExplicitPathName
OBJECT-TYPE
Indicates the explicit path name set by the operator.Currently, can't support.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10OCTET STRING (SIZE(0..31))read-createcurrent
hwPWTemplateBFDDetectMultiplier
OBJECT-TYPE
The multiple of detection time.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11Unsigned32 (0 | 3..50)read-createcurrent
hwPWTemplateBFDMinReceiveInterval
OBJECT-TYPE
The interval of bfd messages to be received.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12Unsigned32 (0 | 3..1000)read-createcurrent
hwPWTemplateBFDMinTransmitInterval
OBJECT-TYPE
The interval of bfd messages to be sent.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13Unsigned32 (0 | 3..1000)read-createcurrent
hwPWTemplateDynamicBFDDetect
OBJECT-TYPE
This value indicates the capacitability to support dynamic BFD detect.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14TruthValueread-createcurrent
hwPWTemplateMaxAtmCells
OBJECT-TYPE
Specifies the MaxAtmCells.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15Unsigned32 (0..28)read-createcurrent
hwPWTemplateAtmPackOvertime
OBJECT-TYPE
Specifies the AtmPackOvertime.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16Unsigned32 (0 | 100..50000)read-createcurrent
hwPWTemplatePwJitterBufferDepth
OBJECT-TYPE
Specifies the PwJitterBufferDepth.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17Unsigned32 (0..64)read-createcurrent
hwPWTemplatePwTdmEncapsulationNum
OBJECT-TYPE
Specifies the PwTdmEncapsulationNum.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18Unsigned32 (0..40)read-createcurrent
hwPWTemplatePwIdleCode
OBJECT-TYPE
Specifies the PwIdleCode.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19Unsigned32 (0..255 | 65535)read-createcurrent
hwPWTemplatePwRtpHeader
OBJECT-TYPE
Specifies the PwRtpHeader.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20Unsigned32read-createcurrent
hwPWTemplatePwCCSeqEnable
OBJECT-TYPE
Specifies the CC Sequence is enable or not.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21HWEnableValueread-createcurrent
hwPWTemplateCir
OBJECT-TYPE
Specifies the committed information rate, based on the PW template entry.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22Unsigned32read-createcurrent
hwPWTemplatePir
OBJECT-TYPE
Specifies the peak information rate, based on the PW template entry.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23Unsigned32read-createcurrent
hwPWTemplateQosProfile
OBJECT-TYPE
Specifies the QoS profile's name, based on the PW template entry.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24DisplayString (SIZE(0..63))read-createcurrent
hwPWTemplateFlowLabel
OBJECT-TYPE
The value of this object identifies whether the PW FlowLabel is enabled.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25EnabledStatusread-createcurrent
hwPWTemplateRowStatus
OBJECT-TYPE
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden.
1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51RowStatusread-createcurrent
hwPWTemplateMIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.6
hwPWTableObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.1.7
hwPWTable
OBJECT-TYPE
This table indicates a PW, that is Static PW or LDP PW
1.3.6.1.4.1.2011.5.25.119.4.1.7.1not-accessiblecurrent
hwPWEntry
OBJECT-TYPE
Provides the information of a VC key entry.
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1not-accessiblecurrent
hwPWId
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1Unsigned32not-accessiblecurrent
hwPWType
OBJECT-TYPE
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2HWL2VpnVcEncapsTypenot-accessiblecurrent
hwPWPeerIp
OBJECT-TYPE
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3IpAddressnot-accessiblecurrent
hwPWInterfaceIndex
OBJECT-TYPE
Index of the interface (or the virtual interface) associated with the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4InterfaceIndexOrZeroread-onlycurrent
hwPwe3MIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3
hwPwe3MIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3.1
hwPwe3MIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3.2
hwL2vpnSvcMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3.3
hwL2vpnPWTableMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3.4
hwPWTemplateMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.119.4.3.5

Notifications

NameOIDStatus
hwPWVcSwitchWtoP
NOTIFICATION-TYPE
This notification is generated when switch from working PW to protect PW happens.
1.3.6.1.4.1.2011.5.25.119.4.1.2.1current
hwPWVcSwitchPtoW
NOTIFICATION-TYPE
This notification is generated when switch from protect PW to working PW happens.
1.3.6.1.4.1.2011.5.25.119.4.1.2.2current
hwPWVcDown
NOTIFICATION-TYPE
This notification indicates the VC's state changes to down.
1.3.6.1.4.1.2011.5.25.119.4.1.2.3current
hwPWVcUp
NOTIFICATION-TYPE
This notification indicates the VC's state changes to up.
1.3.6.1.4.1.2011.5.25.119.4.1.2.4current
hwPWVcDeleted
NOTIFICATION-TYPE
This notification indicates the VC is deleted.
1.3.6.1.4.1.2011.5.25.119.4.1.2.5current
hwPWVcBackup
NOTIFICATION-TYPE
This notification indicates the VC's state changes to backup.
1.3.6.1.4.1.2011.5.25.119.4.1.2.6current
hwLdpPWVcDown
NOTIFICATION-TYPE
This notification indicates the LDP PW VC's state changes to down.
1.3.6.1.4.1.2011.5.25.119.4.1.2.7current
hwLdpPWVcUp
NOTIFICATION-TYPE
This notification indicates the Ldp PW VC's state changes to up.
1.3.6.1.4.1.2011.5.25.119.4.1.2.8current
hwPWVcStatusChange
NOTIFICATION-TYPE
This notification indicates the VC's Active state changed.
1.3.6.1.4.1.2011.5.25.119.4.1.2.9current
hwVpwsPwRedundancyDegraded
NOTIFICATION-TYPE
VPWS PW redundancy reported a protect degraded alarm.
1.3.6.1.4.1.2011.5.25.119.4.1.2.10current
hwVpwsPwRedundancyDegradedClear
NOTIFICATION-TYPE
VPWS PW redundancy reported the clearing of the protect degraded alarm.
1.3.6.1.4.1.2011.5.25.119.4.1.2.11current
hwRemoteApPwParaMisMatch
NOTIFICATION-TYPE
This notification indicates the low-speed interface parameter settings reported by the remoter AP mismatch those of the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.2.12current
hwRemoteApPwParaMisMatchResume
NOTIFICATION-TYPE
This notification indicates the low-speed interface parameter settings reported by the remoter AP match those of the PW.
1.3.6.1.4.1.2011.5.25.119.4.1.2.13current
hwSvcSwitchWtoP
NOTIFICATION-TYPE
This notification is generated when switch from working PW to protect PW happens.Currently, can't support.
1.3.6.1.4.1.2011.5.25.119.4.1.4.1current
hwSvcSwitchPtoW
NOTIFICATION-TYPE
This notification is generated when switch from protect PW to working PW happens.Currently, can't support.
1.3.6.1.4.1.2011.5.25.119.4.1.4.2current
hwSvcDown
NOTIFICATION-TYPE
This notification indicates the SVC's state changes to down.
1.3.6.1.4.1.2011.5.25.119.4.1.4.3current
hwSvcUp
NOTIFICATION-TYPE
This notification indicates the SVC's state changes to up.
1.3.6.1.4.1.2011.5.25.119.4.1.4.4current
hwSvcDeleted
NOTIFICATION-TYPE
This notification indicates the SVC is deleted.
1.3.6.1.4.1.2011.5.25.119.4.1.4.5current
hwPWTemplateCannotDeleted
NOTIFICATION-TYPE
This notification indicates the PWTemplate cannot be deleted.
1.3.6.1.4.1.2011.5.25.119.4.1.6.1current

Conformance

NameOIDStatus
hwPwe3MIBCompliance
MODULE-COMPLIANCE
The compliance statement for systems supporting the HUAWEI-PWE3-MIB.
1.3.6.1.4.1.2011.5.25.119.4.3.1.1current
hwPWVcGroup
OBJECT-GROUP
The Pwe3's VC group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.1current
hwPWVcTnlGroup
OBJECT-GROUP
The PWE3's VC Tunnel group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.2current
hwPWVcStatisticsGroup
OBJECT-GROUP
The PWE3's VC Statistics group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.3current
hwPWRemoteVcGroup
OBJECT-GROUP
The PWE3's Remote VC group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.4current
hwPWTemplateGroup
OBJECT-GROUP
The PWE3's Template group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.5current
hwPWNotificationControlGroup
OBJECT-GROUP
The PWE3's Notification Control group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.6current
hwPWVcStateChangeReasonGroup
OBJECT-GROUP
The PWE3's Vc State Reason group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.7current
hwPWVcNotificationGroup
NOTIFICATION-GROUP
The PWE3's VC Notification group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.8current
hwLdpPWStateChangeReasonGroup
OBJECT-GROUP
The LDP PW VC State Reason group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.9current
hwPWVcTDMPerfCurrentGroup
OBJECT-GROUP
The PWE3's VC TDM performance information group.
1.3.6.1.4.1.2011.5.25.119.4.3.2.10current
hwSvcGroup
OBJECT-GROUP
The L2vpn's SVC group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.1current
hwSvcTnlGroup
OBJECT-GROUP
The L2vpn's SVC Tunnel group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.2current
hwSvcStatisticsGroup
OBJECT-GROUP
The L2vpn's SVC Statistics group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.3current
hwSvcNotificationControlGroup
OBJECT-GROUP
The L2vpn SVC's Notification Control group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.4current
hwSvcStateChangeReasonGroup
OBJECT-GROUP
The L2vpn's SVc State Reason group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.5current
hwSvcNotificationGroup
NOTIFICATION-GROUP
The L2vpn's SVC Notification group.
1.3.6.1.4.1.2011.5.25.119.4.3.3.6current
hwPWTableGroup
OBJECT-GROUP
The PW Table Group.
1.3.6.1.4.1.2011.5.25.119.4.3.4.1current
hwPWTemplateNotificationGroup
NOTIFICATION-GROUP
The L2vpn's PW Template Notification group.
1.3.6.1.4.1.2011.5.25.119.4.3.5.1current