HUAWEI-OSPFV2-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.155
- Last updated
- 2017-08-17 20:02
- Organization
- Huawei Technologies Co.,Ltd.
- Revisions
- 2017-08-17 20:02, 2017-03-25 16:59, 2017-02-25 12:36, 2016-08-04 15:21, 2016-05-25 11:10, 2016-05-25 11:10, 2016-05-25 11:10, 2016-03-23 17:50, 2016-03-16 17:50, 2016-02-16 17:50, 2015-12-18 17:50, 2015-07-08 11:10, 2015-05-03 11:10, 2015-04-03 11:10, 2014-05-21 21:10, 2013-12-15 12:36, 2013-08-29 15:40, 2013-06-29 09:49
- Namespace
- huawei
- Source file
HUAWEI-OSPFV2-MIB- Digest
sha256:8a21684d0ca14a516c7f7e2f5af6fcf057d8042853d66de78763c44b1d85505d
Description
The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and on peripheral devices. The MIB is proper for system configuration. There are no constraints on this MIB.
Contact
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
Imports
| From | Symbols |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| OSPF-MIB | ospfLsdbLsid, ospfLsdbRouterId, ospfNbrAddressLessIndex, ospfNbrIpAddr, ospfNbrRtrId, ospfNbrState, ospfRouterId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HUAWEI-MIB HUAWEI-OSPFV2-MIB IANAifType-MIB IF-MIB OSPF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwOspfv2MIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.1 | |||
| hwOspfv2MIBBinding OBJECT-TYPE The ID of OSPF process that is bound to OSPF public MIB and the process will respond to SNMP requests from OSPF public MIB. The default value 0 means that no process is bound to OSPF public MIB. | 1.3.6.1.4.1.2011.5.25.155.1.1 | Integer32 (0..65535) | read-write | current |
| hwOspfv2ChangeTable OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.2 | |||
| hwOspfv2MIBObjectsChange OBJECT-TYPE This node is used to record the time ticks when hwOspfv2MIBObjectsTable changed last time. | 1.3.6.1.4.1.2011.5.25.155.2.1 | TimeTicks | read-only | current |
| hwOspfv2ProcessChange OBJECT-TYPE This node is used to record the time ticks when hwOspfv2ProcessTable changed last time. | 1.3.6.1.4.1.2011.5.25.155.2.2 | TimeTicks | read-only | current |
| hwOspfv2AreaChange OBJECT-TYPE This node is used to record the time ticks when hwOspfv2AreaTable changed last time. | 1.3.6.1.4.1.2011.5.25.155.2.3 | TimeTicks | read-only | current |
| hwOspfv2NetworkChange OBJECT-TYPE This node is used to record the time ticks when hwOspfv2NetworkTable changed last time. | 1.3.6.1.4.1.2011.5.25.155.2.4 | TimeTicks | read-only | current |
| hwOspfv2ProcessTable OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF processes. | 1.3.6.1.4.1.2011.5.25.155.3 | not-accessible | current | |
| hwOspfv2ProcessEntry OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF processes. | 1.3.6.1.4.1.2011.5.25.155.3.1 | not-accessible | current | |
| hwOspfv2ProcessIdIndex OBJECT-TYPE The process ID indicates the OSPF process number. The value ranges from 1 to 4294967295. | 1.3.6.1.4.1.2011.5.25.155.3.1.1 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2VpnName OBJECT-TYPE The name of VPN instance to which the process belongs. The process instance needs to be specified when the process is created, and then cannot be changed. | 1.3.6.1.4.1.2011.5.25.155.3.1.2 | DisplayString (SIZE(0..31)) | read-create | current |
| hwOspfv2ConfigRouterId OBJECT-TYPE A 32-bit integer uniquely identifies the router in the Autonomous System. OSPF private router ID can be configured through this node. The default value is 0.0.0.0. If the value of this node is 0.0.0.0, it means that no private router ID is set for this process. | 1.3.6.1.4.1.2011.5.25.155.3.1.3 | IpAddress | read-create | current |
| hwOspfv2ActualRouterId OBJECT-TYPE This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, the actual router ID should default to the value of one of the router's IP interface addresses. By default, the value is '00000000'H. | 1.3.6.1.4.1.2011.5.25.155.3.1.4 | IpAddress | read-only | current |
| hwOspfv2BandwidthReference OBJECT-TYPE The reference value that is used to calculate the link cost. If there is no explicit link cost, OSPF calculates the cost according to the bandwidth of the link (cost = reference value (M)/bandwidth). | 1.3.6.1.4.1.2011.5.25.155.3.1.5 | Unsigned32 | read-create | current |
| hwOspfv2Description OBJECT-TYPE The description of the OSPF process. | 1.3.6.1.4.1.2011.5.25.155.3.1.6 | DisplayString (SIZE(0..80)) | read-create | current |
| hwOspfv2LsaArriveIntvl OBJECT-TYPE To avoid wasting network resources due to network changes, OSPF defines that the interval for receiving LSAs is 1 second. In a stable network, if the fast speed of route convergence is required, you can cancel the interval of receiving LSAs by setting it to 0 seconds. Routers can thus detect changes of topology and route in time. This speeds up route convergence. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2LsaArriveMaxIntvl, hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl) to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.7 | Integer32 (-1 | 0..10000) | read-create | current |
| hwOspfv2LsaArriveMaxIntvl OBJECT-TYPE This object indicates the maximum interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.8 | Integer32 (-1 | 1..120000) | read-create | current |
| hwOspfv2LsaArriveStartIntvl OBJECT-TYPE This object indicates the initial interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is specified, you need also specify hwOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.9 | Integer32 (-1 | 0..60000) | read-create | current |
| hwOspfv2LsaArriveHoldIntvl OBJECT-TYPE This object indicates the Holdtime interval of intelligent-timer for receiving OSPF LSAs. After an intelligent timer is enabled, the interval for receiving LSAs is as follows: The initial interval for receiving LSAs is specified by the parameter start-interval. The interval for receiving LSAs for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF receives LSAs at the maximum interval for three consecutive times. Then, OSPF receives LSAs at the initial interval specified by start-interval. When hwOspfv2LsaArriveHoldIntvl is specified, you need also specify wOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveStartIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.10 | Integer32 (-1 | 1..60000) | read-create | current |
| hwOspfv2LsaOrigIntvl OBJECT-TYPE To avoid wasting network source due to network changes, OSPF defines that the interval for updating LSAs is 5 seconds. In a stable network, if the speed of route convergence is required to be fast, you can cancel the interval for updating LSAs by setting it to 0 seconds. So, routers can detect changes of topology and route in time. This speeds up route convergence. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2LsaOrigMaxIntvl, hwOspfv2LsaOrigStartIntvl, and hwOspfv2LsaOrigHoldIntvl) to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.11 | Integer32 (-1 | 0) | read-create | current |
| hwOspfv2LsaOrigMaxIntvl OBJECT-TYPE This object indicates the maximum interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specified, you need also specify hwOspfv2LsaOrigStartIntvl and hwOspfv2LsaOrigHoldIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.12 | Integer32 (-1 | 1..120000) | read-create | current |
| hwOspfv2LsaOrigStartIntvl OBJECT-TYPE This object indicates the initial interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigHoldIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.13 | Integer32 (-1 | 0..60000) | read-create | current |
| hwOspfv2LsaOrigHoldIntvl OBJECT-TYPE This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, the interval for updating LSAs is as follows: The initial interval for updating LSAs is specified by the parameter start-interval. The interval for updating LSAs for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF updates LSAs at the maximum interval for three consecutive times. Then, OSPF updates LSAs at the initial interval specified by start-interval. When hwOspfv2LsaOrigHoldIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigStartIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.14 | Integer32 (-1 | 1..60000) | read-create | current |
| hwOspfv2LsaOrigIntvlOtherType OBJECT-TYPE This object indicates the interval for updating LSAs, excluding OSPF router LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType and hwOspfv2LsaOrigIntvl cannot be specified together. Here -1 indicated that hwOspfv2LsaOrigIntvl is enabled instead. Note that -1 is not a configurable value. Instead, by set this node to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.15 | Integer32 (-1 | 0..10) | read-create | current |
| hwOspfv2LsdbOverflowLimit OBJECT-TYPE The maximum number of external LSAs in OSPF LSDB. When this node is set to 0, it means that no limits exist. | 1.3.6.1.4.1.2011.5.25.155.3.1.16 | Integer32 (0..1000000) | read-create | current |
| hwOspfv2MaxLoadBalaNumber OBJECT-TYPE The maximum number of equal-cost routes to a destination in the routing table. | 1.3.6.1.4.1.2011.5.25.155.3.1.17 | Integer32 | read-create | current |
| hwOspfv2AseRouteMaxNumber OBJECT-TYPE The maximum number of ASE routes that are supported by OSPF. | 1.3.6.1.4.1.2011.5.25.155.3.1.18 | Integer32 (100..5000000) | read-create | current |
| hwOspfv2InterRouteMaxNumber OBJECT-TYPE The maximum number of inter-area routes that are supported by OSPF. | 1.3.6.1.4.1.2011.5.25.155.3.1.19 | Integer32 (100..1000000) | read-create | current |
| hwOspfv2IntraRouteMaxNumber OBJECT-TYPE The maximum number of intra-area routes that are supported by OSPF. | 1.3.6.1.4.1.2011.5.25.155.3.1.20 | Integer32 (100..100000) | read-create | current |
| hwOspfv2RetransLimitMaxNumber OBJECT-TYPE The maximum count of retransmission. The value is an integer that ranges from 2 to 255. When the retransmission limit is disabled, the value is set to 0. | 1.3.6.1.4.1.2011.5.25.155.3.1.21 | Integer32 (0 | 2..255) | read-create | current |
| hwOspfv2Rfc1583Compatibility OBJECT-TYPE It is used to enable the routing rule for compatible RFC 1583. | 1.3.6.1.4.1.2011.5.25.155.3.1.22 | TruthValue | read-create | current |
| hwOspfv2ShamHello OBJECT-TYPE It is used to enable the sham-hello feature of OSPF. After the feature is enabled, OSPF updates the timeout timer of the neighbor when receiving protocol packets of various types. | 1.3.6.1.4.1.2011.5.25.155.3.1.23 | TruthValue | read-create | current |
| hwOspfv2SpfSchIntvlUnit OBJECT-TYPE The value of the object identifies the interval unit for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalNumber. By default, this object is none, indicating that an intelligent timer is enabled instead. Note that none is not a configurable value. Instead, by set the intelligent timer (hwOspfv2SpfSchMaxIntvl, hwOspfv2SpfSchStartIntvl, and hwOspfv2SpfSchHoldIntvl) to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.24 | INTEGER {second(1), millionSecond(2), none(3)} | read-create | current |
| hwOspfv2SpfSchIntvlNumber OBJECT-TYPE The value of the object identifies the interval for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalUnit. By default, this object is -1, indicating that an intelligent timer is enabled instead. Note that -1 is not a configurable value. Instead, by set the intelligent timer (hwOspfv2SpfSchMaxIntvl, hwOspfv2SpfSchStartIntvl, and hwOspfv2SpfSchHoldIntvl) to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.25 | Integer32 (-1 | 0 | 1..10000) | read-create | current |
| hwOspfv2SpfSchMaxIntvl OBJECT-TYPE This object indicates the maximum interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchMaxIntvl is specified, you need also specify hwOspfv2SpfSchStartIntvl and hwOspfv2SpfSchHoldIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.26 | Integer32 (-1 | 1..120000) | read-create | current |
| hwOspfv2SpfSchStartIntvl OBJECT-TYPE This object indicates the initial interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchStartIntvl is specified, you need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchHoldIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.27 | Integer32 (-1 | 1..60000) | read-create | current |
| hwOspfv2SpfSchHoldIntvl OBJECT-TYPE This object indicates the Holdtime interval of intelligent timer for OSPF to perform the SPF calculation. After an intelligent timer is enabled, the interval for the SPF calculation is as follows: The initial interval for the SPF calculation is specified by the parameter start-interval. The interval for the SPF calculation for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF performs the SPF calculation at the maximum interval for three consecutive times. Then, OSPF performs the SPF calculation at the initial interval specified by start-interval. When hwOspfv2SpfSchHoldIntvl is specified, you need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchStartIntvl, but you cannot specify hwOspfv2SpfSchIntvlUnit or hwOspfv2SpfSchIntvlNumber. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration. | 1.3.6.1.4.1.2011.5.25.155.3.1.28 | Integer32 (-1 | 1..60000) | read-create | current |
| hwOspfv2OpaqueCapability OBJECT-TYPE It is used to enable opaque-LSAs capability. When the capability is enabled, then the OSPF process can generate opaque LSAs and process the opaque LSAs received from neighbors. | 1.3.6.1.4.1.2011.5.25.155.3.1.29 | TruthValue | read-create | current |
| hwOspfv2TrafficAdjustment OBJECT-TYPE It is used to enable IGP-shortcut feature. The value false means disable. Otherwise, the value true means enable. If you want to set this node to false, please check whether Local MT feature is disabled. When Local MT feature is enabled, this node cannot be set to false. | 1.3.6.1.4.1.2011.5.25.155.3.1.30 | TruthValue | read-create | current |
| hwOspfv2TrafficAdvertise OBJECT-TYPE It is used to enable IGP-shortcut and Forwarding Adjacency feature. | 1.3.6.1.4.1.2011.5.25.155.3.1.31 | TruthValue | read-create | current |
| hwOspfv2FlushTimer OBJECT-TYPE The value of the flush timer. When configuring or undoing OSPF process, flush self-originated LSAs first. If the timer expires, stop flushing LSAs, and then reset the process. This timer is one-off. When flushing is finished, it recovers to 0. | 1.3.6.1.4.1.2011.5.25.155.3.1.32 | Integer32 (0..40) | read-create | current |
| hwOspfv2ProcessRowStatus OBJECT-TYPE This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new process. If the process is created successfully, the value of this node changes to active. | 1.3.6.1.4.1.2011.5.25.155.3.1.33 | RowStatus | read-create | current |
| hwOspfv2AreaTable OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF areas. | 1.3.6.1.4.1.2011.5.25.155.4 | not-accessible | current | |
| hwOspfv2AreaEntry OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF areas. | 1.3.6.1.4.1.2011.5.25.155.4.1 | not-accessible | current | |
| hwOspfv2AreaIdIndex OBJECT-TYPE A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. | 1.3.6.1.4.1.2011.5.25.155.4.1.1 | IpAddress | not-accessible | current |
| hwOspfv2AreaType OBJECT-TYPE Specify the type of area: nssa(1), stub(2), normal(3). | 1.3.6.1.4.1.2011.5.25.155.4.1.2 | INTEGER {nssa(1), stub(2), normal(3)} | read-create | current |
| hwOspfv2AreaNoSummary OBJECT-TYPE This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an ABR. This also prevents the ABR from transmitting Summary LSA (Type-3 LSA) to the NSSA or Stub area. Note: All nodes about NSSA property (hwOspfv2AreaType, hwOspfv2AreaNoSummary, hwOspfv2AreaNssaFlushTimer, hwOspfv2AreaNssaNoImportRoute, hwOspfv2AreaNssaDefAdvertise, hwOspfv2AreaNssaTransAlways, hwOspfv2AreaNssaTransTimer, hwOspfv2AreaNssaAllowFaZero, hwOspfv2AreaNssaSuppressFa, and hwOspfv2AreaNssaSetNBit) should be set together. | 1.3.6.1.4.1.2011.5.25.155.4.1.3 | TruthValue | read-create | current |
| hwOspfv2AreaNssaFlushTimer OBJECT-TYPE The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If the timer expires, stop flushing LSAs, and then reset the area. This timer is one-off. When flushing is finished, it recovers to 0. | 1.3.6.1.4.1.2011.5.25.155.4.1.4 | Integer32 (0..40) | read-create | current |
| hwOspfv2AreaNssaDefAdvertise OBJECT-TYPE This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it must originate Type-7 LSAs, while for ASBR router only if the route to 0.0.0.0 exists, it should originate Type-7 LSAs. | 1.3.6.1.4.1.2011.5.25.155.4.1.5 | TruthValue | read-create | current |
| hwOspfv2AreaNssaNoImportRoute OBJECT-TYPE This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the external route can not be advertised to the NSSA area. | 1.3.6.1.4.1.2011.5.25.155.4.1.6 | TruthValue | read-create | current |
| hwOspfv2AreaNssaTransAlways OBJECT-TYPE This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NSSA border router. When hwOspfAreaNssaTranslateAlways is set to true, Type-7 LSAs are always translated regardless of the translator state of other NSSA border routers. When hwOspfAreaNssaTranslateAlways is set to false, an NSSA border router will participate in the translator election process. The router will translate Type-7 LSAs to Type-5 LSAs only after being selected. | 1.3.6.1.4.1.2011.5.25.155.4.1.7 | TruthValue | read-create | current |
| hwOspfv2AreaNssaTransTimer OBJECT-TYPE This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable translator transition. If the area type is not NSSA, the default value of the translator stability interval parameter is 0 seconds, and hwOspfv2AreaType is stub(2) or normal(3). If the type of the area is NSSA, the default value of the translator stability interval parameter is 40 seconds, and hwOspfv2AreaType is nssa(1). | 1.3.6.1.4.1.2011.5.25.155.4.1.8 | Integer32 (0..120) | read-create | current |
| hwOspfv2AreaNssaAllowFaZero OBJECT-TYPE When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LSAs. | 1.3.6.1.4.1.2011.5.25.155.4.1.9 | TruthValue | read-create | current |
| hwOspfv2AreaNssaSuppressFa OBJECT-TYPE When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs into Type-5 LSAs. | 1.3.6.1.4.1.2011.5.25.155.4.1.10 | TruthValue | read-create | current |
| hwOspfv2AreaNssaSetNBit OBJECT-TYPE When this node is set to true, N-bit should be set in the option when sending DD packets. | 1.3.6.1.4.1.2011.5.25.155.4.1.11 | TruthValue | read-create | current |
| hwOspfv2AreaDefCost OBJECT-TYPE This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777214. The default value is -1. | 1.3.6.1.4.1.2011.5.25.155.4.1.12 | Integer32 (-1 | 0..16777214) | read-create | current |
| hwOspfv2AreaDescription OBJECT-TYPE This node is used to specify the description of the area. | 1.3.6.1.4.1.2011.5.25.155.4.1.13 | DisplayString (SIZE(0..80)) | read-create | current |
| hwOspfv2AreaFilterExpAcl OBJECT-TYPE This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAclName, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.14 | Integer32 (0 | 2000..2999) | read-create | current |
| hwOspfv2AreaFilterExpPrefix OBJECT-TYPE This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.15 | DisplayString (SIZE(0..169)) | read-create | current |
| hwOspfv2AreaFilterExpPolicy OBJECT-TYPE This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPrefix. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.16 | DisplayString (SIZE(0..40)) | read-create | current |
| hwOspfv2AreaFilterImpAcl OBJECT-TYPE This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAclName, hwOspfv2AreaFilterImpPrefix, and hwOspfv2AreaFilterImpPolicy. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.17 | Integer32 (0 | 2000..2999) | read-create | current |
| hwOspfv2AreaFilterImpPrefix OBJECT-TYPE This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, and hwOspfv2AreaFilterImpPolicy. Only one node can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.18 | DisplayString (SIZE(0..169)) | read-create | current |
| hwOspfv2AreaFilterImpPolicy OBJECT-TYPE This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName and hwOspfv2AreaFilterImpPrefix. Only one node can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.19 | DisplayString (SIZE(0..40)) | read-create | current |
| hwOspfv2AreaAuthModeType OBJECT-TYPE The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher mode. hmd5(4): indicates the hmac-md5 cipher mode. keychain(5): indicates the keychain authentication mode. hmacSha256(6): indicates the hmac-Sha256 cipher mode. Note: If this value is set to simple(2), you should specify hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText, but cannot specify hwOspfv2AreaAuthKeyId. To configure the simple authentication mode with the authentication key being NULL, set hwOspfv2AreaAuthPasswordType to plainText(2) and set hwOspfv2AreaAuthText to a string of 0 characters. If this value is set to md5(3) or hmd5(4) or hsha256(6), you can specify hwOspfv2AreaAuthKeyId or not. Once you specify hwOspfv2AreaAuthKeyId, you should specify hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText at the same time. If this value is set to keychain(5), you should specify it and hwOspfv2AreaAuthText together, or specify it and hwOspfv2AreaAuthKeychName together, but should not specify hwOspfv2AreaAuthKeyId and hwOspfv2AreaAuthPasswordType, and should not specify hwOspfv2AreaAuthText and hwOspfv2AreaAuthKeychName at the same time. | 1.3.6.1.4.1.2011.5.25.155.4.1.20 | INTEGER {none(1), simple(2), md5(3), hmd5(4), keychain(5), hmacSha256(6)} | read-create | current |
| hwOspfv2AreaAuthPasswordType OBJECT-TYPE Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain text authentication key on the node hwOspfAreaAuthText. When viewing the configuration file, display the password in plain mode. ciphertext(3): If this node is set to ciphertext(3), you can specify the cipher text authentication key or cipher text authentication key in node hwOspfv2AreaAuthText. When viewing the configuration file, display the password in cipher mode. Note: If you set this node to plaintext(2) or ciphertext(3), you should set the node hwOspfv2AreaAuthText at the same time. | 1.3.6.1.4.1.2011.5.25.155.4.1.21 | INTEGER {none(1), plainText(2), cipherText(3)} | read-create | current |
| hwOspfv2AreaAuthKeyId OBJECT-TYPE Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 to 255. The default value 0 means no configuration. | 1.3.6.1.4.1.2011.5.25.155.4.1.22 | Integer32 (0..255) | read-create | current |
| hwOspfv2AreaAuthText OBJECT-TYPE In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 characters in cipher text. In MD5 or HMAC-MD5 or HMAC-SHA256 authentication, this object also indicates the authentication key. It's a string of 1 to 255 characters in plain text or 20 to 392 characters in cipher text. In keychain authentication, this object indicates the keychain name. It's a string of 1 to 47 characters. When read, hwOspfv2AreaAuthText always returns an octet string of length zero. | 1.3.6.1.4.1.2011.5.25.155.4.1.23 | DisplayString | read-create | current |
| hwOspfv2AreaMplsTe OBJECT-TYPE The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected if it has more than one Top level TLV. stdDisable(3): accepts the LSAs not in the standard format. | 1.3.6.1.4.1.2011.5.25.155.4.1.24 | INTEGER {disable(1), stdEnable(2), stdDisable(3)} | read-create | current |
| hwOspfv2AreaAreaRowStatus OBJECT-TYPE This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new area. If the area is created successfully, the value of this node changes to active. | 1.3.6.1.4.1.2011.5.25.155.4.1.25 | RowStatus | read-create | current |
| hwOspfv2AreaFilterExpAclName OBJECT-TYPE This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.26 | DisplayString (SIZE(0..32)) | read-create | current |
| hwOspfv2AreaFilterImpAclName OBJECT-TYPE This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpPrefix, and hwOspfv2AreaFilterImpPolicy. Only one object can be configured each time. | 1.3.6.1.4.1.2011.5.25.155.4.1.27 | DisplayString (SIZE(0..32)) | read-create | current |
| hwOspfv2AreaAuthKeychName OBJECT-TYPE This object indicates the keychain name. It's a string of 1 to 47 characters. | 1.3.6.1.4.1.2011.5.25.155.4.1.28 | DisplayString | read-create | current |
| hwOspfv2NetworkTable OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF networks. | 1.3.6.1.4.1.2011.5.25.155.5 | not-accessible | current | |
| hwOspfv2NetworkEntry OBJECT-TYPE Information describes the configured parameters of the router's attached OSPF networks. | 1.3.6.1.4.1.2011.5.25.155.5.1 | not-accessible | current | |
| hwOspfv2NetworkIpAddrIndex OBJECT-TYPE Network IP address: specifies the address of the network segment where the interface resides. | 1.3.6.1.4.1.2011.5.25.155.5.1.1 | IpAddress | not-accessible | current |
| hwOspfv2NetworkIpMaskIndex OBJECT-TYPE Network IP mask: specifies the wildcard mask of an IP address, which is similar to the reversed form of the mask of an IP address. '1' represents that the corresponding bit in the IP address is ignored and '0' represents that this bit must be reserved. | 1.3.6.1.4.1.2011.5.25.155.5.1.2 | IpAddress | not-accessible | current |
| hwOspfv2NetworkRowStatus OBJECT-TYPE This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new network. If the network is created successfully, the value of this node changes to active. | 1.3.6.1.4.1.2011.5.25.155.5.1.3 | RowStatus | read-create | current |
| hwOspfv2NeighborTable OBJECT-TYPE This object indicates the configured parameters of the OSPF neighbors attached to the router. | 1.3.6.1.4.1.2011.5.25.155.6 | not-accessible | current | |
| hwOspfv2NeighborEntry OBJECT-TYPE This object indicates the configured parameters of the OSPF neighbors attached to the router. | 1.3.6.1.4.1.2011.5.25.155.6.1 | not-accessible | current | |
| hwOspfv2SelfIfnetIndex OBJECT-TYPE This object indicates the unique value for each interface. | 1.3.6.1.4.1.2011.5.25.155.6.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hwOspfv2NbrIpAddrIndex OBJECT-TYPE This object indicates the IP address of the OSPF neighbor. | 1.3.6.1.4.1.2011.5.25.155.6.1.2 | IpAddress | not-accessible | current |
| hwOspfv2SelfRouterId OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the router ID of itself. | 1.3.6.1.4.1.2011.5.25.155.6.1.3 | IpAddress | read-only | current |
| hwOspfv2SelfIfIpAddress OBJECT-TYPE This object indicates the IP address of the OSPF interface associated with this neighbor. | 1.3.6.1.4.1.2011.5.25.155.6.1.4 | IpAddress | read-only | current |
| hwOspfv2SelfIfName OBJECT-TYPE The name of the OSPF interface associated with this neighbor. | 1.3.6.1.4.1.2011.5.25.155.6.1.5 | DisplayString (SIZE(0..63)) | read-only | current |
| hwOspfv2NbrIfDesignatedRouter OBJECT-TYPE This object indicates the IP address of the designated router that is obtained from the DD packets from this neighbor. By default, the value is '00000000'H. | 1.3.6.1.4.1.2011.5.25.155.6.1.6 | IpAddress | read-only | current |
| hwOspfv2NbrIfBackupDesignatedRouter OBJECT-TYPE This object indicates the IP address of the backup designated router which is obtained from the DD packets from this neighbor. By default, the value is '00000000'H. | 1.3.6.1.4.1.2011.5.25.155.6.1.7 | IpAddress | read-only | current |
| hwOspfv2NbrIfMtu OBJECT-TYPE This object indicates the size of the largest IP datagram that can be sent out the sending interface without fragmentation. It is obtained from the DD packets from this neighbor. By default, the value is 0. The MTU of the interface should be set to 0 in the DD packets when the MTU is not enabled on the OSPF interface. | 1.3.6.1.4.1.2011.5.25.155.6.1.8 | Integer32 | read-only | current |
| hwOspfv2NbrRouterId OBJECT-TYPE This object indicates the router ID of this neighbor. | 1.3.6.1.4.1.2011.5.25.155.6.1.9 | IpAddress | read-only | current |
| hwOspfv2NbrState OBJECT-TYPE This object indicates the state of the relationship with this neighbor. By default, the state is down. | 1.3.6.1.4.1.2011.5.25.155.6.1.10 | INTEGER {down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)} | read-only | current |
| hwOspfv2NbrMode OBJECT-TYPE This object indicates whether this neighbor is master or slave through the DD negotiation. | 1.3.6.1.4.1.2011.5.25.155.6.1.11 | INTEGER {master(1), slave(2)} | read-only | current |
| hwOspfv2NbrPriority OBJECT-TYPE This object indicates the priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. By default, the value is 1. | 1.3.6.1.4.1.2011.5.25.155.6.1.12 | Integer32 (0..255) | read-only | current |
| hwOspfv2NbrUpTime OBJECT-TYPE This object indicates the time (in seconds) since the state of this neighbor has been full. | 1.3.6.1.4.1.2011.5.25.155.6.1.13 | Unsigned32 | read-only | current |
| hwOspfv2NbrAuthSequence OBJECT-TYPE This object indicates the unsigned 32-bit non-decreasing sequence number. Used to guard against replay attacks. By default, the value is 0. | 1.3.6.1.4.1.2011.5.25.155.6.1.14 | Unsigned32 | read-only | current |
| hwOspfv2NbrDeadTimeLeft OBJECT-TYPE This object indicates the period (in seconds) after which this neighbor is declared dead. | 1.3.6.1.4.1.2011.5.25.155.6.1.15 | Gauge32 (0..235926000) | read-only | current |
| hwOspfv2NbrGrStatus OBJECT-TYPE This object indicates whether the neighbor performs GR or functions as a GR helper. By default, the state is normal. | 1.3.6.1.4.1.2011.5.25.155.6.1.16 | INTEGER {normal(1), doingGR(2), helper(3), notsupport(4)} | read-only | current |
| hwOspfv2InterfaceTable OBJECT-TYPE The Interface Table describes the interfaces from the viewpoint of OSPF. | 1.3.6.1.4.1.2011.5.25.155.7 | not-accessible | current | |
| hwOspfv2InterfaceEntry OBJECT-TYPE Information describes the configured parameters of the OSPF interfaces. | 1.3.6.1.4.1.2011.5.25.155.7.1 | not-accessible | current | |
| hwOspfv2InterfaceIndex OBJECT-TYPE A unique value for each interface. | 1.3.6.1.4.1.2011.5.25.155.7.1.1 | Integer32 | not-accessible | current |
| hwOspfv2InterfaceName OBJECT-TYPE The name of the OSPF interface. | 1.3.6.1.4.1.2011.5.25.155.7.1.2 | DisplayString (SIZE(0..63)) | read-only | current |
| hwOspfv2TrapsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.30 | |||
| hwOspfv2NbrChgReason OBJECT-TYPE The reason of the OSPF neighbor state change. | 1.3.6.1.4.1.2011.5.25.155.30.1 | INTEGER {adjacencyHoldTimerExpired(1), physicalInterfaceChange(2), ospfProtocolReason(3), bfdSessionStateChange(4), configureChange(5), peerRouterReason(6), waitingForEstablishingNeighbor(7), alarmCleared(100)} | accessible-for-notify | current |
| hwOspfv2IfChgReason OBJECT-TYPE The reason of the OSPF interface state change. | 1.3.6.1.4.1.2011.5.25.155.30.2 | INTEGER {configureChange(1), physicalInterfaceChange(2), alarmCleared(100)} | accessible-for-notify | current |
| hwOspfv2AreaId OBJECT-TYPE A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. | 1.3.6.1.4.1.2011.5.25.155.30.3 | IpAddress | read-only | current |
| hwOspfv2NewRouterId OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the new router ID. | 1.3.6.1.4.1.2011.5.25.155.30.4 | IpAddress | read-only | current |
| hwOspfv2PeerFlappingSuppressStatus OBJECT-TYPE The suppress status of peer flapping. | 1.3.6.1.4.1.2011.5.25.155.30.5 | INTEGER {none(1), holddown(2), holdmaxcost(3)} | accessible-for-notify | current |
| hwOspfv2PeerFlappingSuppressReason OBJECT-TYPE The reason of peer flapping suppress status change. | 1.3.6.1.4.1.2011.5.25.155.30.6 | INTEGER {resumeTimerExpired(1), configureChange(2), resetSuppressFlapping(3), neighbourFlapping(4), holddownToHoldmaxcost(5)} | accessible-for-notify | current |
| hwOspfv2LsaId OBJECT-TYPE A 32-bit integer uniquely identifies an area. LSA-ID 0.0.0.0 is used for the OSPF LSA. | 1.3.6.1.4.1.2011.5.25.155.30.7 | IpAddress | read-only | current |
| hwOspfv2LsaAge OBJECT-TYPE This age of the ospf lsa. | 1.3.6.1.4.1.2011.5.25.155.30.8 | Integer32 (0..3600) | read-only | current |
| hwOspfv2PurgeHostName OBJECT-TYPE This object indicates the name of an OSPF router which purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.9 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| hwOspfv2PurgeIpAddress OBJECT-TYPE This object indicates the IP address of an OSPF router which purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.10 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeRouterId OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. | 1.3.6.1.4.1.2011.5.25.155.30.11 | IpAddress | accessible-for-notify | current |
| hwOspfv2FlushLsaNum OBJECT-TYPE This object indicates the number of LSAs deleted by the local device or another device. | 1.3.6.1.4.1.2011.5.25.155.30.12 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2AffectedNodeNum OBJECT-TYPE This object indicates the number of affected node when OSPF routes were deleted. | 1.3.6.1.4.1.2011.5.25.155.30.13 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2TotalNodeNum OBJECT-TYPE This object indicates the total number of node in the System. | 1.3.6.1.4.1.2011.5.25.155.30.14 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2PurgeStatPeriod OBJECT-TYPE This object indicates the period interval for purge statistic. | 1.3.6.1.4.1.2011.5.25.155.30.15 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2RuledOutDeviceNum OBJECT-TYPE This object indicates the number of node ruled out when checking faulty device. | 1.3.6.1.4.1.2011.5.25.155.30.16 | Unsigned32 | accessible-for-notify | current |
| hwOspfv2PurgeHostName1 OBJECT-TYPE This object indicates the name of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.17 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| hwOspfv2PurgeHostName2 OBJECT-TYPE This object indicates the name of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.18 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| hwOspfv2PurgeHostName3 OBJECT-TYPE This object indicates the name of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.19 | DisplayString (SIZE(0..64)) | accessible-for-notify | current |
| hwOspfv2PurgeIpAddress1 OBJECT-TYPE This object indicates the IP address of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.20 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeIpAddress2 OBJECT-TYPE This object indicates the IP address of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.21 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeIpAddress3 OBJECT-TYPE This object indicates the IP address of an OSPF router which maybe purge OSPF routes. | 1.3.6.1.4.1.2011.5.25.155.30.22 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeRouterId1 OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. | 1.3.6.1.4.1.2011.5.25.155.30.23 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeRouterId2 OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. | 1.3.6.1.4.1.2011.5.25.155.30.24 | IpAddress | accessible-for-notify | current |
| hwOspfv2PurgeRouterId3 OBJECT-TYPE This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. | 1.3.6.1.4.1.2011.5.25.155.30.25 | IpAddress | accessible-for-notify | current |
| hwOspfv2Traps OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.31 | |||
| hwOspfv2Conformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.32 | |||
| hwOspfv2Compliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.32.1 | |||
| hwOspfv2Groups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.32.2 | |||
| hwOspfv2Statistic OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.33 | |||
| hwOspfv2ProcessStatisticTable OBJECT-TYPE Information describes the statistics of the router's attached OSPF processes. | 1.3.6.1.4.1.2011.5.25.155.33.1 | not-accessible | current | |
| hwOspfv2ProcessStatisticEntry OBJECT-TYPE Information describes the statistics of the router's attached OSPF processes. | 1.3.6.1.4.1.2011.5.25.155.33.1.1 | not-accessible | current | |
| hwospfv2ProcessPeerNumber OBJECT-TYPE The peer number of OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.1 | Integer32 | read-only | current |
| hwospfv2ProcessFullPeerNumber OBJECT-TYPE The value of this object identifies the number of neighbors in full state in the OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.2 | Integer32 | read-only | current |
| hwospfv2ProcessPeerUpCount OBJECT-TYPE The value of this object identifies the number of neighbors in Up state in the OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.3 | Counter32 | read-only | current |
| hwospfv2ProcessPeerDownCount OBJECT-TYPE The value of this object identifies the number of neighbors in Down state in the OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.4 | Counter32 | read-only | current |
| hwospfv2ProcessSendLsaNumber OBJECT-TYPE The lsa send number of OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.5 | Counter32 | read-only | current |
| hwospfv2ProcessReceiveLsaNumber OBJECT-TYPE The lsa receive number of OSPF process. | 1.3.6.1.4.1.2011.5.25.155.33.1.1.6 | Counter32 | read-only | current |
| hwOspfv2InterfaceStatisticTable OBJECT-TYPE Information describes the statistics of the router's attached OSPF interfaces. | 1.3.6.1.4.1.2011.5.25.155.33.2 | not-accessible | current | |
| hwOspfv2InterfaceStatisticEntry OBJECT-TYPE Information describes the statistics of the router's attached OSPF interfaces. | 1.3.6.1.4.1.2011.5.25.155.33.2.1 | not-accessible | current | |
| hwospfv2InterfacePeerUpCount OBJECT-TYPE The value of this object identifies the number of neighbors in Up state on the OSPF interface. | 1.3.6.1.4.1.2011.5.25.155.33.2.1.1 | Counter32 | read-only | current |
| hwospfv2InterfacePeerDownCount OBJECT-TYPE The value of this object identifies the number of neighbors in Down state on the OSPF interface. | 1.3.6.1.4.1.2011.5.25.155.33.2.1.2 | Counter32 | read-only | current |
| hwOspfv2GlobalStatistic OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.155.33.3 | |||
| hwospfv2SendLsaNumber OBJECT-TYPE The lsa send number of OSPF router. | 1.3.6.1.4.1.2011.5.25.155.33.3.1 | Counter32 | read-only | current |
| hwospfv2ReceiveLsaNumber OBJECT-TYPE The lsa receive number of OSPF router. | 1.3.6.1.4.1.2011.5.25.155.33.3.2 | Counter32 | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hwOspfV2NeighborUnavailable NOTIFICATION-TYPE These objects are used to monitor/manage changed OSPF neighbor alarm parameters. | 1.3.6.1.4.1.2011.5.25.155.31.1 | current |
| hwOspfV2NeighborUnavailableClear NOTIFICATION-TYPE These objects are used to monitor/manage changed OSPF neighbor clear alarm parameters. | 1.3.6.1.4.1.2011.5.25.155.31.2 | current |
| hwOspfv2IntraAreaRouteridConflict NOTIFICATION-TYPE The object is used to monitor router ID conflict in an intra area. | 1.3.6.1.4.1.2011.5.25.155.31.3 | current |
| hwOspfv2IntraAreaDRIpAddressConflict NOTIFICATION-TYPE The object is used to monitor conflicted IP addresses of DRs in an intra area. | 1.3.6.1.4.1.2011.5.25.155.31.4 | current |
| hwOspfv2IntraAreaRouterIdConflictRecovered NOTIFICATION-TYPE The object is used to monitor router ID conflict recovery in an intra area. | 1.3.6.1.4.1.2011.5.25.155.31.5 | current |
| hwOspfv2PeerFlappingSuppressStatusChange NOTIFICATION-TYPE The object is used to monitor the peer flapping-suppress status of interface in ospfv2. | 1.3.6.1.4.1.2011.5.25.155.31.6 | current |
| hwOspfv2ImportAseRouteThreshold NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs generated when an OSPF process imports external routes exceeds the configured alarm threshold. | 1.3.6.1.4.1.2011.5.25.155.31.7 | current |
| hwOspfv2ImportAseRouteThresholdClear NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs generated when an OSPF process imports external routes has been less than the configured alarm threshold. | 1.3.6.1.4.1.2011.5.25.155.31.8 | current |
| hwOspfv2ImportAseRouteExceed NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs generated when an OSPF process imports external routes exceeds the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.9 | current |
| hwOspfv2ImportAseRouteExceedClear NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs generated when an OSPF process imports external routes has been less than the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.10 | current |
| hwOspfv2ImportNssaRouteThreshold NOTIFICATION-TYPE This object indicates that the number of NSSA LSAs generated when an OSPF process imports external routes exceeds the configured alarm threshold. | 1.3.6.1.4.1.2011.5.25.155.31.11 | current |
| hwOspfv2ImportNssaRouteThresholdClear NOTIFICATION-TYPE This object indicates that the number of NSSA LSAs generated when an OSPF process imports external routes has been less than the configured alarm threshold. | 1.3.6.1.4.1.2011.5.25.155.31.12 | current |
| hwOspfv2ImportNssaRouteExceed NOTIFICATION-TYPE This object indicates that the number of NSSA LSAs generated when an OSPF process imports external routes falls below the lower threshold. | 1.3.6.1.4.1.2011.5.25.155.31.13 | current |
| hwOspfv2ImportNssaRouteExceedClear NOTIFICATION-TYPE This object indicates that the number of NSSA LSAs generated when an OSPF process imports external routes reaches or exceeds the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.14 | current |
| hwOspfv2LsdbApproachingOverflow NOTIFICATION-TYPE This object indicates that the number of NSSA LSAs generated when an OSPF process imports external routes falls below the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.15 | current |
| hwOspfv2LsdbApproachingOverflowClear NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs in the LSDB of an OSPF process is approaching the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.16 | current |
| hwOspfv2LsdbOverflow NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs in the LSDB of an OSPF process falls far below the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.17 | current |
| hwOspfv2LsdbOverflowClear NOTIFICATION-TYPE This object indicates that the number of AS-external LSAs in the LSDB of an OSPF process has reached the configured maximum number. | 1.3.6.1.4.1.2011.5.25.155.31.18 | current |
| hwOspfv2GreaterAgeLsaRecived NOTIFICATION-TYPE The object is used to monitor the router recive a greater age lsa in ospfv2. | 1.3.6.1.4.1.2011.5.25.155.31.19 | current |
| hwOspfv2DeleteRouteByPurge NOTIFICATION-TYPE This object indicates that the local device deleted OSPF routes advertised by other devices. Reset or isolate the device from the network. | 1.3.6.1.4.1.2011.5.25.155.31.20 | current |
| hwOspfv2DeleteRouteByPurgeClear NOTIFICATION-TYPE This object indicates that the local device did not delete OSPF routes advertised by other devices. | 1.3.6.1.4.1.2011.5.25.155.31.21 | current |
| hwOspfv2RouteBeDeletedByPurgeExact NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were deleted by another device. Reset or isolate the faulty device from the network. | 1.3.6.1.4.1.2011.5.25.155.31.22 | current |
| hwOspfv2RouteBeDeletedByPurgeExactClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were not deleted by another device. | 1.3.6.1.4.1.2011.5.25.155.31.23 | current |
| hwOspfv2RouteBeDeletedByPurgeInexact NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were deleted by another device, and the possibly faulty device did not support OSPF flush LSA source trace. Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. Neither of the devices displayed in the display ospf purge-source-trace analysis-info command output is the faulty device. | 1.3.6.1.4.1.2011.5.25.155.31.24 | current |
| hwOspfv2RouteBeDeletedByPurgeInexactClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were not deleted by another device. | 1.3.6.1.4.1.2011.5.25.155.31.25 | current |
| hwOspfv2RouteBeDeletedByPurge NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were deleted by another device. Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. | 1.3.6.1.4.1.2011.5.25.155.31.26 | current |
| hwOspfv2RouteBeDeletedByPurgeClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by the local device were not deleted by another device. | 1.3.6.1.4.1.2011.5.25.155.31.27 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurgeExact NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were deleted. Reset or isolate the faulty device from the network. | 1.3.6.1.4.1.2011.5.25.155.31.28 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurgeExactClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were not deleted. | 1.3.6.1.4.1.2011.5.25.155.31.29 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurgeInexact NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were deleted, and the possibly faulty device did not support OSPF flush LSA source trace. Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. Neither of the devices displayed in the display ospf purge-source-trace analysis-info command output is the faulty device. | 1.3.6.1.4.1.2011.5.25.155.31.30 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurgeInexactClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were not deleted. | 1.3.6.1.4.1.2011.5.25.155.31.31 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurge NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were deleted. Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. | 1.3.6.1.4.1.2011.5.25.155.31.32 | current |
| hwOspfv2ThirdPartRouteBeDeletedByPurgeClear NOTIFICATION-TYPE This object indicates that OSPF routes advertised by another device were not deleted. | 1.3.6.1.4.1.2011.5.25.155.31.33 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwOspfv2ModuleFullCompliance MODULE-COMPLIANCE The compliance statement for entities implementing the Huawei OSPF MIB | 1.3.6.1.4.1.2011.5.25.155.32.1.1 | current |
| hwOspfv2MIBObjectsGroup OBJECT-GROUP These objects are used to monitor/manage OSPF general parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.1 | current |
| hwOspfv2ProcessGroup OBJECT-GROUP These objects are used to monitor/manage OSPF process parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.2 | current |
| hwOspfv2AreaGroup OBJECT-GROUP These objects are used to monitor/manage OSPF area parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.4 | current |
| hwOspfv2NetworkGroup OBJECT-GROUP These objects are used to monitor/manage OSPF network parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.5 | current |
| hwOspfv2NeighborGroup OBJECT-GROUP These objects are used to monitor/manage changed OSPF neighbor parameters | 1.3.6.1.4.1.2011.5.25.155.32.2.6 | current |
| hwOspfv2ChangeGroup OBJECT-GROUP These objects are used to monitor/manage changed OSPF table parameters | 1.3.6.1.4.1.2011.5.25.155.32.2.7 | current |
| hwOspfTrapEventGroup NOTIFICATION-GROUP These objects are used to monitor/manage changed OSPF private alarm parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.8 | current |
| hwOspfv2TrapsObjectsGroup OBJECT-GROUP The objects are used to monitor/manage the neighbor state change from full to others. | 1.3.6.1.4.1.2011.5.25.155.32.2.9 | current |
| hwOspfv2InterfaceGroup OBJECT-GROUP These objects are used to monitor/manage changed OSPF interface parameters. | 1.3.6.1.4.1.2011.5.25.155.32.2.10 | current |
| hwOspfv2ProcessStatisticGroup OBJECT-GROUP The statistics information group of OSPF process. | 1.3.6.1.4.1.2011.5.25.155.32.2.11 | current |
| hwOspfv2PeerFlappingGroup OBJECT-GROUP These objects are used to monitor/manage changed OSPF peer flapping suppress status. | 1.3.6.1.4.1.2011.5.25.155.32.2.12 | current |
| hwOspfv2InterfaceStatisticGroup OBJECT-GROUP The statistics information group of OSPF interface. | 1.3.6.1.4.1.2011.5.25.155.32.2.13 | current |
| hwOspfv2GlobalStatisticGroup OBJECT-GROUP The statistics information group of OSPF router. | 1.3.6.1.4.1.2011.5.25.155.32.2.14 | current |