HUAWEI-MPLSLSR-EXT-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.182
- Last updated
- 2013-09-24 16:55
- Organization
- Huawei Technologies Co.,Ltd.
- Revisions
- 2013-09-24 16:55, 2011-07-30 11:00, 2010-11-22 16:00, 2010-08-11 16:00, 2010-07-12 16:00, 2009-03-10 16:00
- Namespace
- huawei
- Source file
HUAWEI-MPLSLSR-EXT-MIB- Digest
sha256:305ee3b9fd4c57c02d6dec2dad250be4647d084b054e916cb53488b228642258
Description
This MIB provides management of MPLS basic configurations. It is an extension of MPLS-LSR-STD-MIB.
Contact
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
Imports
| From | Symbols |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| MPLS-TC-STD-MIB | MplsLabel |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB HUAWEI-MIB HUAWEI-MPLSLSR-EXT-MIB IANAifType-MIB IF-MIB MPLS-TC-STD-MIB P-BRIDGE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwMplsLsrExtObject OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.182.1 | |||
| hwMplsLsrId OBJECT-TYPE This object indicates the configuration of the MPLS LSR ID. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. After the MPLS capability is enabled, the MPLS LSR ID cannot be modified or deleted. If the MPLS LSR ID is set as 0.0.0.0, it indicates that the MPLS LSR ID is deleted. The MPLS LSR ID and the MPLS capability cannot be configured together. | 1.3.6.1.4.1.2011.5.25.182.1.1 | IpAddress | read-write | current |
| hwMplsCapabilityConfig OBJECT-TYPE This object indicates the configuration or deletion of the MPLS capability. Before the MPLS capability is enabled, the MPLS LSR ID must be configured. | 1.3.6.1.4.1.2011.5.25.182.1.2 | EnabledStatus | read-write | current |
| hwMplsLabelAdvertise OBJECT-TYPE This object indicates the way to configure label advertisement policy. By default, the label advertisement policy is implicitnull. Before the label advertisement policy is configured, MPLS capability must be enabled. Options: 1. explicitNull(1) -indicates that the label advertisement policy is explicitNull. 2. implicitNull(2) -indicates that the label advertisement policy is implicitNull. 3. nonNull(3) -indicates that the label advertisement policy is nonNull. Default: implicitNull(2) | 1.3.6.1.4.1.2011.5.25.182.1.3 | INTEGER {explicitNull(1), implicitNull(2), nonNull(3)} | read-write | current |
| hwMplsStatisticsIntervalTimer OBJECT-TYPE This object indicates the value of the MPLS statistics timer. Range: 30-65535 Default: 0 Unit: seconds | 1.3.6.1.4.1.2011.5.25.182.1.4 | Integer32 (0..65535) | read-write | current |
| hwMplsBfdCapabilityConfig OBJECT-TYPE This object indicates the configuration or deletion of the MPLS BFD capability. Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability. | 1.3.6.1.4.1.2011.5.25.182.1.5 | EnabledStatus | read-write | current |
| hwMplsBfdMinTx OBJECT-TYPE This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.6 | Integer32 | read-write | current |
| hwMplsBfdMinRx OBJECT-TYPE This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.7 | Integer32 | read-write | current |
| hwMplsBfdDetectMultiplier OBJECT-TYPE This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.8 | Integer32 | read-write | current |
| hwMplsFecListName OBJECT-TYPE This object indicates the name of the FEC LIST. The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters. If the character length is 0, it indicates that the FEC LIST is deleted. Furthermore, the FEC LIST cannot be modified, and you can only delete the FEC LIST and then create a new one. If the FEC LIST is used by others, you need to cancel the usage and then delete the FEC LIST. Range: 1-31 | 1.3.6.1.4.1.2011.5.25.182.1.9 | DisplayString | read-write | current |
| hwMplsBfdTrigger OBJECT-TYPE This object indicates the MPLS BFD triggering policy. By using this object, you can also specify the next hop and the outgoing interface. To configure the MPLS BFD triggering policy, you must enable MPLS and BFD in advance. In addition, this MPLS BFD triggering policy cannot be modified, and you can only delete the policy and then create a new one. Options: 1. triggerHost(1) -indicates that the MPLS BFD triggering policy was configured as host. 2. triggerFeclist(2) -indicates that the MPLS BFD triggering policy was configured as FEC list. 3. disabled(3) -indicates that the MPLS BFD triggering policy was not configured. Default: triggerHost(1) | 1.3.6.1.4.1.2011.5.25.182.1.10 | INTEGER {triggerHost(1), triggerFeclist(2), disabled(3)} | read-write | current |
| hwMplsBfdTriggerNextHop OBJECT-TYPE This object indicates the next hop when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time. | 1.3.6.1.4.1.2011.5.25.182.1.11 | IpAddress | read-write | current |
| hwMplsBfdTriggerInterface OBJECT-TYPE This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host. The next hop and the outgoing interface can be specified at the same time. In addition, you can get the correct interface index based on the ifIndex of ifTable. | 1.3.6.1.4.1.2011.5.25.182.1.12 | Unsigned32 | read-write | current |
| hwMplsBfdTriggerFecListName OBJECT-TYPE This object indicates the FEC list when the MPLS BFD trigger policy is configured. The valid length of the FEC list ranges from 1 to 31 characters. If the specified FEC list does not exist, or the specified FEC list contains no FEC node, no LSP can be triggered. Range: 1-31 | 1.3.6.1.4.1.2011.5.25.182.1.13 | DisplayString | read-write | current |
| hwLdpVirtualTunnelFEC OBJECT-TYPE This object indicates the LDP virtual tunnel FEC. | 1.3.6.1.4.1.2011.5.25.182.1.14 | Unsigned32 | accessible-for-notify | current |
| hwMplsBgpBfdCapabilityConfig OBJECT-TYPE This object indicates the configuration or deletion of the MPLS BGP BFD capability. Before the MPLS BGP BFD function is enabled, you must enable the MPLS capability and BFD capability. | 1.3.6.1.4.1.2011.5.25.182.1.15 | EnabledStatus | read-write | current |
| hwMplsBgpBfdMinTx OBJECT-TYPE This object indicates the minimum forwarding period. If the minimum forwarding period is set as 0 seconds, it indicates that the minimum forwarding period returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.16 | Integer32 | read-write | current |
| hwMplsBgpBfdMinRx OBJECT-TYPE This object indicates the minimum receiving period. If the minimum receiving period is set as 0 seconds, it indicates that the minimum receiving period returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.17 | Integer32 | read-write | current |
| hwMplsBgpBfdDetectMultiplier OBJECT-TYPE This object indicates the value of the detect multiplier. If the value of the detect multiplier is set as 0, it indicates that the value returns to the default value. | 1.3.6.1.4.1.2011.5.25.182.1.18 | Integer32 | read-write | current |
| hwMplsBgpBfdTriggerTunnel OBJECT-TYPE This object indicates the MPLS BGP BFD triggering policy. To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance. Options: 1. triggerHost(1) -indicates that the MPLS BGP BFD triggering policy was configured as host. 2. triggerIpPrefix(2) -indicates that the MPLS BGP BFD triggering policy was configured as Ip Prefix. 3. disabled(3) -indicates that the MPLS BGP BFD triggering policy was not configured. Default: disabled(3) | 1.3.6.1.4.1.2011.5.25.182.1.19 | INTEGER {triggerHost(1), triggerIpPrefix(2), disabled(3)} | read-write | current |
| hwMplsBgpBfdTriggerTunnelIpprefix OBJECT-TYPE This object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured. The valid length of the IP prefix name ranges from 1 to 169 characters. Range: 1-169 | 1.3.6.1.4.1.2011.5.25.182.1.20 | DisplayString | read-write | current |
| hwMplsFecListTable OBJECT-TYPE This table is used to configure or delete MPLS FEC Node. The indexes of this table are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop. | 1.3.6.1.4.1.2011.5.25.182.1.50 | not-accessible | current | |
| hwMplsFecListEntry OBJECT-TYPE An FEC node entry of FEC list table. It can be created, or deleted. The indexes of this entry are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop. | 1.3.6.1.4.1.2011.5.25.182.1.50.1 | not-accessible | current | |
| hwMplsFecNodeIpAddress OBJECT-TYPE This object indicates the IP address of the specified FEC node. | 1.3.6.1.4.1.2011.5.25.182.1.50.1.2 | IpAddress | not-accessible | current |
| hwMplsFecNodeInterface OBJECT-TYPE This object indicates the outgoing interface of the FEC node. You can get the correct interface index based on the ifIndex of ifTable. | 1.3.6.1.4.1.2011.5.25.182.1.50.1.3 | Unsigned32 | not-accessible | current |
| hwMplsFecNodeNextHop OBJECT-TYPE This object indicates the next hop of the FEC node. | 1.3.6.1.4.1.2011.5.25.182.1.50.1.4 | IpAddress | not-accessible | current |
| hwMplsFecListRowStatus OBJECT-TYPE This object indicates whether one entry of FEC list table is created or destroyed. The value of the object can be CreatAndGo or Destroy. If the value is set as CreatAndGo, and the entry is created in hwFecListTable, the status of the object will change into active. | 1.3.6.1.4.1.2011.5.25.182.1.50.1.51 | RowStatus | read-create | current |
| hwMplsInterfaceTable OBJECT-TYPE This table is used to configure or delete the MPLS capability on the interface. The index of this table is hwMplsInterfaceIndex. | 1.3.6.1.4.1.2011.5.25.182.1.51 | not-accessible | current | |
| hwMplsInterfaceEntry OBJECT-TYPE An entry of the MPLS interface table, used to display and configure features on the MPLS-supporting interface. The index of this entry is hwMplsInterfaceIndex. | 1.3.6.1.4.1.2011.5.25.182.1.51.1 | not-accessible | current | |
| hwMplsInterfaceIndex OBJECT-TYPE This object indicates the interface index. You can get the correct interface index based on the ifIndex of ifTable. | 1.3.6.1.4.1.2011.5.25.182.1.51.1.1 | InterfaceIndex | not-accessible | current |
| hwMplsMtu OBJECT-TYPE This object indicates the MPLS MTU of an interface. If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted. | 1.3.6.1.4.1.2011.5.25.182.1.51.1.11 | Integer32 | read-create | current |
| hwMplsInterfaceRowStatus OBJECT-TYPE This object indicates whether one entry is created or deleted in hwMplsInterfaceTable. The value of the object can be CreatAndGo and Destroy. When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active. | 1.3.6.1.4.1.2011.5.25.182.1.51.1.51 | RowStatus | read-create | current |
| hwLdpStaticFrrInterfaceTable OBJECT-TYPE This table is used to configure or delete static LDP FRR entries on the interface. The indexes of this table are hwMplsInterfaceIndex and hwLdpStaticFrrPriority. | 1.3.6.1.4.1.2011.5.25.182.1.52 | not-accessible | current | |
| hwLdpStaticFrrInterfaceEntry OBJECT-TYPE This entry is used to display and configure the FRR-supporting interface. The indexes of this entry are hwMplsInterfaceIndex and hwLdpStaticFrrPriority. | 1.3.6.1.4.1.2011.5.25.182.1.52.1 | not-accessible | current | |
| hwLdpStaticFrrPriority OBJECT-TYPE This object indicates the priority of a static FRR entry. | 1.3.6.1.4.1.2011.5.25.182.1.52.1.1 | Integer32 (1..65535) | not-accessible | current |
| hwLdpStaticFrrNextHop OBJECT-TYPE This object indicates the next hop of the static FRR. | 1.3.6.1.4.1.2011.5.25.182.1.52.1.11 | IpAddress | read-create | current |
| hwLdpStaticFrrIpPrefix OBJECT-TYPE This object indicates the IP prefix policy. The valid prefix length ranges from 1 to 169 characters. When the length is 0, it indicates that the policy is deleted. Range: 1-169 | 1.3.6.1.4.1.2011.5.25.182.1.52.1.12 | DisplayString | read-create | current |
| hwLdpStaticFrrInterfaceRowStatus OBJECT-TYPE This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable. The value of the object can be CreatAndGo or Destroy. When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active. | 1.3.6.1.4.1.2011.5.25.182.1.52.1.51 | RowStatus | read-create | current |
| hwLdpVirtualTunnelTable OBJECT-TYPE This table specifies LDP virtual tunnel information. The index of this table is hwLdpVirtualTunnelIndex. | 1.3.6.1.4.1.2011.5.25.182.1.53 | not-accessible | current | |
| hwLdpVirtualTunnelEntry OBJECT-TYPE An entry of the virtual tunnel table, used to display the features associated with the virtual tunnel. The index of this entry is hwLdpVirtualTunnelIndex. | 1.3.6.1.4.1.2011.5.25.182.1.53.1 | not-accessible | current | |
| hwLdpVirtualTunnelIndex OBJECT-TYPE This object indicates the LDP virtual tunnel index. | 1.3.6.1.4.1.2011.5.25.182.1.53.1.1 | Unsigned32 | not-accessible | current |
| hwLdpVirtualStatus OBJECT-TYPE The status of this LDP virtual tunnel. Options: 1. up(1) -indicates that the status of this LDP virtual tunnel is Up. 2. down(2) -indicates that the status of this LDP virtual tunnel is Down. 3. testing(3) -indicates that the status of this LDP virtual tunnel is testing, this is, in some test mode. Default: up(1) | 1.3.6.1.4.1.2011.5.25.182.1.53.1.2 | INTEGER {up(1), down(2), testing(3)} | read-only | current |
| hwLdpXcIndexArray OBJECT-TYPE This object indicates the xc index of the members of the LDP virtual tunnel. | 1.3.6.1.4.1.2011.5.25.182.1.53.1.3 | OCTET STRING | read-only | current |
| hwLdpOutSegmentIndexArray OBJECT-TYPE This object indicates the outsegment index of the members of the LDP virtual tunnel. | 1.3.6.1.4.1.2011.5.25.182.1.53.1.4 | OCTET STRING | read-only | current |
| hwLdpVirtualTunnelTrap OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.182.1.54 | |||
| hwMplsStaticLspTable OBJECT-TYPE This table is used to create or delete static LSP configurations. The index of this table is hwMplsStaticLspName. | 1.3.6.1.4.1.2011.5.25.182.1.55 | not-accessible | current | |
| hwMplsStaticLspEntry OBJECT-TYPE The entry is used to show or configure static LSP. The index of this entry is hwMplsStaticLspName. | 1.3.6.1.4.1.2011.5.25.182.1.55.1 | not-accessible | current | |
| hwMplsStaticLspName OBJECT-TYPE This object indicates the name of static LSP. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.1 | DisplayString | not-accessible | current |
| hwMplsStaticLspType OBJECT-TYPE This object is used to identify the type of static LSP. Options: 1. ingress(1) -indicates that the type of the static LSP is ingress. 2. transit(2) -indicates that the type of the static LSP is transit. 3. egress(3) -indicates that the type of the static LSP is egress. 4. ingressBindTunnel(4) -indicates that the type of the static LSP is ingress-bind-tunnel. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.11 | INTEGER {ingress(1), transit(2), egress(3), ingressBindTunnel(4)} | read-create | current |
| hwMplsStaticLspInIntfIndex OBJECT-TYPE This object indicates the incoming-interface index. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.12 | Unsigned32 | read-create | current |
| hwMplsStaticLspInLabel OBJECT-TYPE This object indicates the in-label. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.13 | MplsLabel | read-create | current |
| hwMplsStaticLspLsrId OBJECT-TYPE This object indicates the LSR ID of ingress static LSP. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.14 | IpAddress | read-create | current |
| hwMplsStaticLspTunnelID OBJECT-TYPE This object indicates the Tunnel ID of ingress static LSP. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.15 | Unsigned32 | read-create | current |
| hwMplsStaticLspNextHop OBJECT-TYPE This object indicates the nexthop of static LSP. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.16 | IpAddress | read-create | current |
| hwMplsStaticLspOutIntfIndex OBJECT-TYPE This object indicates the outgoing-interface index. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.17 | Unsigned32 | read-create | current |
| hwMplsStaticLspOutLabel OBJECT-TYPE This object indicates the out-label. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.18 | MplsLabel | read-create | current |
| hwMplsStaticLspDestAddr OBJECT-TYPE This object indicates the destination. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.19 | IpAddress | read-create | current |
| hwMplsStaticLspMaskLen OBJECT-TYPE This object indicates the mask length. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.20 | Unsigned32 | read-create | current |
| hwMplsStaticLspRowStatus OBJECT-TYPE This object indicates whether one entry is created or deleted in hwMplsStaticLspTable. The value of the object can be CreateAndGo or Destroy. When the value is set as CreateAndGo, and the entry is created, the status of the object will change into active. | 1.3.6.1.4.1.2011.5.25.182.1.55.1.51 | RowStatus | read-create | current |
| hwMplsLsrExtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.182.2 | |||
| hwMplsLsrExtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.182.2.1 | |||
| hwMplsLsrExtGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.182.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwMplsLdpVirtualTunnelUp NOTIFICATION-TYPE A trap is sent when an LDP virtual tunnel goes Up. | 1.3.6.1.4.1.2011.5.25.182.1.54.1 | current |
| hwMplsLdpVirtualTunnelDown NOTIFICATION-TYPE A trap is sent when an LDP virtual tunnel goes Down. | 1.3.6.1.4.1.2011.5.25.182.1.54.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwMplsModuleCompliance MODULE-COMPLIANCE hwMplsModuleCompliance | 1.3.6.1.4.1.2011.5.25.182.2.1.1 | current |
| hwMplsBasicGroup OBJECT-GROUP Objects required for MPLS basic configuration management. | 1.3.6.1.4.1.2011.5.25.182.2.2.1 | current |
| hwMplsBfdGroup OBJECT-GROUP Objects required for MPLS BFD configuration management. | 1.3.6.1.4.1.2011.5.25.182.2.2.2 | current |
| hwLdpStaticFrrGroup OBJECT-GROUP Objects required for LDP static FRR configuration management. | 1.3.6.1.4.1.2011.5.25.182.2.2.3 | current |
| hwMplsInterfaceGroup OBJECT-GROUP Objects required for MPLS configuration management on interface. | 1.3.6.1.4.1.2011.5.25.182.2.2.4 | current |
| hwMplsLdpVirtualTunnelGroup OBJECT-GROUP Objects required for LDP virtual tunnel management. | 1.3.6.1.4.1.2011.5.25.182.2.2.5 | current |
| hwMplsLdpVirtualTunnelNotificationGroup NOTIFICATION-GROUP Notification information about LDP virtual tunnel. | 1.3.6.1.4.1.2011.5.25.182.2.2.6 | current |
| hwMplsStaticLspGroup OBJECT-GROUP Objects required for static LSP configuration management. | 1.3.6.1.4.1.2011.5.25.182.2.2.7 | current |
| hwMplsBgpBfdGroup OBJECT-GROUP Objects required for MPLS BGP BFD configuration management. | 1.3.6.1.4.1.2011.5.25.182.2.2.8 | current |