HUAWEI-MPLS-EXTEND-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.121
- Last updated
- 2017-08-17 16:40
- Organization
- Huawei Technologies Co.,Ltd.
- Revisions
- 2017-08-17 16:40, 2017-04-25 16:00, 2017-03-04 16:00, 2016-12-13 16:00, 2016-06-13 16:00, 2016-01-11 16:00, 2016-01-06 12:00, 2015-08-01 12:00, 2015-04-11 12:00, 2015-03-31 14:19, 2015-03-19 17:00, 2015-01-22 19:16, 2015-01-12 20:16, 2014-11-21 18:00, 2014-11-14 18:00, 2014-11-06 16:30, 2014-08-12 14:50, 2014-07-21 14:27, 2014-06-16 14:17, 2014-02-17 19:05, 2014-02-07 11:00, 2014-01-27 11:00, 2014-01-13 13:45, 2013-11-07 17:45, 2013-09-11 17:45, 2013-04-13 16:52, 2013-01-14 15:25, 2012-07-05 20:25, 2012-06-08 14:05, 2012-06-05 11:00, 2012-05-09 11:00, 2012-05-04 11:00, 2011-11-29 11:00, 2011-11-18 11:00, 2011-10-24 11:00, 2011-07-30 11:00, 2010-11-23 11:55, 2010-07-13 15:35, 2006-06-30 15:54
- Namespace
- huawei
- Source file
HUAWEI-MPLS-EXTEND-MIB- Digest
sha256:71bcae66daa04c6c981bca522f1b86b554a04961c2182a52f162325eabe26313
Description
This MIB is used for defining the HUAWEI private extended Multiprotocol Label Switching (MPLS) MIB object. All MIB objects are used to describe private managed objects and trap definitions for MPLS.
Contact
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
Imports
| From | Symbols |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifIndex, ifName |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | MplsExtendedTunnelId, MplsLsrIdentifier, MplsTunnelIndex, MplsTunnelInstanceIndex |
| MPLS-TE-STD-MIB | mplsTunnelAdminStatus, mplsTunnelOperStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DIFFSERV-DSCP-TC DIFFSERV-MIB HUAWEI-MIB HUAWEI-MPLS-EXTEND-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB INTEGRATED-SERVICES-MIB MPLS-LSR-STD-MIB MPLS-TC-STD-MIB MPLS-TE-STD-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwMplsExtendMibTunnel OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.1 | |||
| hwMplsTunnelTable OBJECT-TYPE A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.1 | not-accessible | current | |
| hwMplsTunnelEntry OBJECT-TYPE A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this entry are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.1.1 | not-accessible | current | |
| hwMplsTunnelIndex OBJECT-TYPE Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.1 | MplsTunnelIndex | not-accessible | current |
| hwMplsTunnelInstance OBJECT-TYPE Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is used to identify multiple instances of tunnels for backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.2 | MplsTunnelInstanceIndex | not-accessible | current |
| hwMplsTunnelIngressLSRId OBJECT-TYPE Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.3 | MplsExtendedTunnelId | not-accessible | current |
| hwMplsTunnelEgressLSRId OBJECT-TYPE Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.4 | MplsExtendedTunnelId | not-accessible | current |
| hwMplsTunnelClassType OBJECT-TYPE Indicates the bandwidth type used by this tunnel. Options: 1. bc0(1) -indicates the bandwidth type is bc0. 2. bc1(2) -indicates the bandwidth type is bc1. 3. invalidValue(3) -indicates the invalid value. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.5 | INTEGER {bc0(1), bc1(2), invalidValue(3)} | read-only | current |
| hwMplsTunnelBandwidth OBJECT-TYPE Indicates the bandwidth used by this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.6 | Integer32 | read-only | current |
| hwMplsTunnelAdminStatus OBJECT-TYPE Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management status of this tunnel is up. 2. down(2) -indicates the management status of this tunnel is down. 3. testing(3) -indicates the tunnel is used in some test mode. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.7 | INTEGER {up(1), down(2), testing(3)} | read-only | current |
| hwMplsTunnelOperStatus OBJECT-TYPE Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates that the operational status of this tunnel is up. 2. down(2) -indicates that the operational status of this tunnel is down. 3. testing(3) -indicates that the tunnel is used in some test mode. 4. unknown(4) -indicates the invalid value. 5. dormant(5) -indicates that the status cannot be determined. 6. notPresent(6) -indicates that some component is missing 7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.8 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| hwMplsTunnelSessionAttr OBJECT-TYPE Indicates protection types desired by the primary tunnel, such as node protection, link protection or bandwidth protection. Options: 1. localProtectionDesired(0) -indicates link protection. 2. nodeProtectionDesired(1) -indicates node protection. 3. bandwidthProtectionDesired(2) -indicates bandwidth protection. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.9 | Bits {localProtectionDesired(0), nodeProtectionDesired(1), bandwidthProtectionDesired(2)} | read-only | current |
| hwMplsTunnelFrrSetupPrio OBJECT-TYPE Indicates the setup PRI of auto-bypass tunnel. Range: 0-7 Default: 7 | 1.3.6.1.4.1.2011.5.25.121.1.1.1.10 | Unsigned32 | read-only | current |
| hwMplsTunnelFrrHoldingPrio OBJECT-TYPE Indicates the holding PRI of auto-bypass tunnel. Range: 0-7 Default: 7 | 1.3.6.1.4.1.2011.5.25.121.1.1.1.11 | Unsigned32 | read-only | current |
| hwMplsTunnelFrrBandwidth OBJECT-TYPE Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.12 | Unsigned32 | read-only | current |
| hwMplsTunnelFrrSwitchover OBJECT-TYPE Indicates FRR switching times | 1.3.6.1.4.1.2011.5.25.121.1.1.1.13 | Counter32 | read-only | current |
| hwMplsTunnelFrrBypassTableIndex OBJECT-TYPE Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. The bypass table shows interfaces protected by specified bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.14 | Unsigned32 | read-only | current |
| hwMplsTunnelFrrARHopTableIndex OBJECT-TYPE Indicates the table index of the protection type adopted by each hop of the primary tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.15 | Unsigned32 | read-only | current |
| hwMplsTunnelName OBJECT-TYPE Indicates the tunnel name. The name can refer to the tunnel on the console port of the LSR. If mplsTunnelIsIf is set to True, the IfName of the interface corresponding to this tunnel should have a value equal to hwMplsTunnelName. Reference to the description of IfName in RFC 2863. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.16 | SnmpAdminString | read-only | current |
| hwMplsTunnelIfIndex OBJECT-TYPE Indicates the interface index of the tunnel. It uniquely identifies the tunnel name. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.17 | Unsigned32 | read-only | current |
| hwMplsTunnelPreBandwidth OBJECT-TYPE Indicates the original bandwidth of the tunnel when the tunnel is in the Modify state. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.18 | Unsigned32 | read-only | current |
| hwMplsTunnelNextBandwidth OBJECT-TYPE Indicates the bandwidth of the tunnel that is to be changed when the tunnel is in the Modify state. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.19 | Unsigned32 | read-only | current |
| hwMplsTunnelCt0Bandwidth OBJECT-TYPE The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s. If all CT bandwidths are 0s, it means that this tunnel's Class-Type is CT0, and bandwidth is 0 kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.20 | Unsigned32 | read-only | current |
| hwMplsTunnelCt1Bandwidth OBJECT-TYPE The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.21 | Unsigned32 | read-only | current |
| hwMplsTunnelCt2Bandwidth OBJECT-TYPE The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.22 | Unsigned32 | read-only | current |
| hwMplsTunnelCt3Bandwidth OBJECT-TYPE The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.23 | Unsigned32 | read-only | current |
| hwMplsTunnelCt4Bandwidth OBJECT-TYPE The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.24 | Unsigned32 | read-only | current |
| hwMplsTunnelCt5Bandwidth OBJECT-TYPE The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.25 | Unsigned32 | read-only | current |
| hwMplsTunnelCt6Bandwidth OBJECT-TYPE The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.26 | Unsigned32 | read-only | current |
| hwMplsTunnelCt7Bandwidth OBJECT-TYPE The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.1.1.27 | Unsigned32 | read-only | current |
| hwMplsTunnelLspType OBJECT-TYPE This object is meaningful only at the ingress of the tunnel. It indicates LSP types. Options: 0. invalid(0) -indicates that the LSP type is invalid, the possible cause is that the LSP is not created at an ingress. 1. primary(1) -indicates the primary LSP 2. primaryModifing(2) -indicates the LSP that will replace the primary LSP 3. hotStandby(3) -indicates the hot-standby LSP 4. hotStandbyModifing(4) -indicates the LSP that will replace the hot-standby LSP 5. ordinary(5) -indicates the ordinary LSP 6. ordinaryModifing(6) -indicates the LSP that will replace the ordinary LSP 7. bestEffort(7) -indicates the Best-Effort LSP 8. bestEffortModifing(8) -indicates the LSP that will replace the Best-Effort LSP Modifying LSPs are created when users modify the make-before-break attribute of the corresponding LSP types. After being created, modifying LSPs replace the corresponding LSPs to transmit traffic. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.28 | INTEGER {invalid(0), primary(1), primaryModifing(2), hotStandby(3), hotStandbyModifing(4), ordinary(5), ordinaryModifing(6), bestEffort(7), bestEffortModifing(8)} | read-only | current |
| hwMplsTunnelInterfaceName OBJECT-TYPE Indicates the tunnel interface name. The object is only valid at the ingress. | 1.3.6.1.4.1.2011.5.25.121.1.1.1.29 | SnmpAdminString | read-only | current |
| hwMplsTunnelSignalProto OBJECT-TYPE Indicates the signal protocol of this tunnel | 1.3.6.1.4.1.2011.5.25.121.1.1.1.30 | INTEGER {rsvpTE(1), static(2), staticCR(3)} | read-only | current |
| hwMplsTunnelType OBJECT-TYPE This object is meaningful only at the ingress of the tunnel. It indicates tunnel types. Options: 1. invalid(1) -indicates that the tunnel type is invalid, the possible cause is that it is not ingress node of this tunnel 2. primaryTunnel(2) -indicates that this is a primary tunnel 3. bypassTunnel(3) -indicates that this is a bypass tunnel | 1.3.6.1.4.1.2011.5.25.121.1.1.1.31 | INTEGER {invalid(1), primaryTunnel(2), bypassTunnel(3)} | read-only | current |
| hwTunnelFrrBypassTable OBJECT-TYPE Indicates the bypass tunnel. The indexes of this table are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex. | 1.3.6.1.4.1.2011.5.25.121.1.2 | not-accessible | current | |
| hwTunnelFrrBypassEntry OBJECT-TYPE Indicates the bypass tunnel.The indexes of this entry are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex. | 1.3.6.1.4.1.2011.5.25.121.1.2.1 | not-accessible | current | |
| hwTunnelFrrBypassListIndex OBJECT-TYPE Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.2.1.1 | Unsigned32 | not-accessible | current |
| hwTunnelFrrBypassIndex OBJECT-TYPE Indicates the index of the bypass tunnel interface. | 1.3.6.1.4.1.2011.5.25.121.1.2.1.2 | Unsigned32 | not-accessible | current |
| hwTunnelFrrBypassProtIfIndex OBJECT-TYPE Indicates the index of the interface protected by the bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.2.1.3 | Unsigned32 | read-only | current |
| hwTunnelFrrARHopTable OBJECT-TYPE Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this table are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex. | 1.3.6.1.4.1.2011.5.25.121.1.3 | not-accessible | current | |
| hwTunnelFrrARHopEntry OBJECT-TYPE Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this entry are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex. | 1.3.6.1.4.1.2011.5.25.121.1.3.1 | not-accessible | current | |
| hwTunnelFrrARHopListIndex OBJECT-TYPE Indicates the table index of each hop along the primary tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.3.1.1 | Unsigned32 | not-accessible | current |
| hwTunnelFrrARHopIndex OBJECT-TYPE Indicates the index of each hop along the primary tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.3.1.2 | Unsigned32 | not-accessible | current |
| hwTunnelFrrARHopProtDesired OBJECT-TYPE Indicates the FRR protection types desired by the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection | 1.3.6.1.4.1.2011.5.25.121.1.3.1.3 | Bits {localProtection(0), nodeProtection(1), bandwidthProtection(2)} | read-only | current |
| hwTunnelFrrARHopProtActual OBJECT-TYPE Indicates the actual FRR protection types of the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection, 3: primary tunnel protection in use | 1.3.6.1.4.1.2011.5.25.121.1.3.1.4 | Bits {localProtection(0), nodeProtection(1), bandwidthProtection(2), protectionInuse(3)} | read-only | current |
| hwTunnelFrrRouteDBTable OBJECT-TYPE Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this table are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.4 | not-accessible | current | |
| hwTunnelFrrRouteDBEntry OBJECT-TYPE Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this entry are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.4.1 | not-accessible | current | |
| hwTunnelFrrRouteDBTunnelIndex OBJECT-TYPE Identifies the index of the primary. Manager obtains new index values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signaling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signaling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.1 | Unsigned32 | not-accessible | current |
| hwTunnelFrrRouteDBTunnelInstance OBJECT-TYPE Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is the object identifies multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3), there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.2 | Unsigned32 | not-accessible | current |
| hwTunnelFrrRouteDBTunnelIngressLSRId OBJECT-TYPE Identifies the ingress LSR ID of the primary tunnel. When the MPLS signalling protocol is rsvp(2),LSR ID equals to the Tunnel Sender Address in the Sender Template object or the Extended Tunnel Id in the SESSION object. When the MPLS signalling protocol is crldp(3), LSR ID equals to the Ingress LSR Router ID in the LSPID TLV object. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.3 | Unsigned32 | not-accessible | current |
| hwTunnelFrrRouteDBTunnelEngressLSRId OBJECT-TYPE Identifies the egress LSR ID of the primary tunnel. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.4 | Unsigned32 | not-accessible | current |
| hwTunnelFrrRouteDBBypassIfIndex OBJECT-TYPE Indicates the interface index of the bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.5 | Unsigned32 | read-only | current |
| hwTunnelFrrRouteDBInnerLabel OBJECT-TYPE Indicates the inner label of the primary tunnel and bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.1.4.1.6 | Unsigned32 | read-only | current |
| hwStaticLspTable OBJECT-TYPE A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this table are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex. | 1.3.6.1.4.1.2011.5.25.121.1.5 | not-accessible | current | |
| hwStaticLspEntry OBJECT-TYPE A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this entry are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex. | 1.3.6.1.4.1.2011.5.25.121.1.5.1 | not-accessible | current | |
| hwStaticLspIndex OBJECT-TYPE Indicates the index of the static LSP. If the string is 0x00, it means that the index is invalid. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.1 | MplsIndexType | not-accessible | current |
| hwStaticLspInSegmentIndex OBJECT-TYPE Indicates the incoming label index of the static LSP/CR-LSP. If the string is 0x00, it means that the index is invalid. In this case, no corresponding mplsInSegmentEntry exists. Reference to MPLS-LSR-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.2 | MplsIndexType | not-accessible | current |
| hwStaticLspOutSegmentIndex OBJECT-TYPE Indicates the outgoing index of the static LSP/CR-LSP. If the entry is used to identify the incoming node or intermediate node of the LSP, this object cannot be set to the string 0x00. Because corresponding mplsOutSegmentEntry exists. If the entry is used to identify the outgoing node of the LSP, this object must be set to the string 0x00. Because no corresponding mplsOutSegmentEntry exists. Reference to MPLS-LSR-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.3 | MplsIndexType | not-accessible | current |
| hwStaticLspOwner OBJECT-TYPE Denotes the entity that creates and manages the static LSP. See MPLS-LSR-STD-MIB. Options: 1. static(1) -indicates the static LSP. 2. crstatic(2) -indicates the static CR-LSP. 3. other(3) -indicates the LSP of another type. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.4 | INTEGER {static(1), crstatic(2), other(3)} | read-only | current |
| hwStaticLspName OBJECT-TYPE Indicates the name of the static LSP or CR-LSP. The name is appointed when the static LSP or CR-LSP is created. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.5 | SnmpAdminString | read-only | current |
| hwStaticLspStatus OBJECT-TYPE Indicates the actual operation status of the static LSP/CR-LSP. Options: 1. up(1) -indicates that the static LSP/CR-LSP is in Up state. 2. down(2) -indicates that the static LSP/CR-LSP is in down state. 3. testing(3) -indicates that the static LSP/CR-LSP is used in test mode. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.6 | INTEGER {up(1), down(2), testing(3)} | read-only | current |
| hwStaticLspClassType OBJECT-TYPE The Class-Type of this static lsp. Options: 1. ct0(1) -indicates that the class type is ct0. 2. ct1(2) -indicates that the class type is ct1. 3. ct2(3) -indicates that the class type is ct2. 4. ct3(4) -indicates that the class type is ct3. 5. ct4(5) -indicates that the class type is ct4. 6. ct5(6) -indicates that the class type is ct5. 7. ct6(7) -indicates that the class type is ct6. 8. ct7(8) -indicates that the class type is ct7. 9. none(9) -indicates that the class type is unconfiged. | 1.3.6.1.4.1.2011.5.25.121.1.5.1.7 | INTEGER {ct0(1), ct1(2), ct2(3), ct3(4), ct4(5), ct5(6), ct6(7), ct7(8), none(9)} | read-only | current |
| hwStaticLspBandwidth OBJECT-TYPE The bandwidth of this static lsp. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.5.1.8 | Unsigned32 | read-only | current |
| hwMplsTeClassTable OBJECT-TYPE TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a <Class-Type, Priority> pair, such as TE-Class[1] = <CT0, 5>. A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight <Class-Type, Priority> pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this table is hwMplsTeClassId. | 1.3.6.1.4.1.2011.5.25.121.1.6 | not-accessible | current | |
| hwMplsTeClassEntry OBJECT-TYPE TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a <Class-Type, Priority> pair, such as TE-Class[1] = <CT0, 5>. A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight <Class-Type, Priority> pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this entry is hwMplsTeClassId. | 1.3.6.1.4.1.2011.5.25.121.1.6.1 | not-accessible | current | |
| hwMplsTeClassId OBJECT-TYPE This value represents the index of the TE-Class configured on this LSR. | 1.3.6.1.4.1.2011.5.25.121.1.6.1.1 | Unsigned32 | not-accessible | current |
| hwMplsTeClassClassType OBJECT-TYPE This value represents a Class-Type supported on the LSR. Options: 1. ct0(1) -indicates that the class type of static CR-LSP is ct0. 2. ct1(2) -indicates that the class type of static CR-LSP is ct1. 3. ct2(3) -indicates that the class type of static CR-LSP is ct2. 4. ct3(4) -indicates that the class type of static CR-LSP is ct3. 5. ct4(5) -indicates that the class type of static CR-LSP is ct4. 6. ct5(6) -indicates that the class type of static CR-LSP is ct5. 7. ct6(7) -indicates that the class type of static CR-LSP is ct6. 8. ct7(8) -indicates that the class type of static CR-LSP is ct7. | 1.3.6.1.4.1.2011.5.25.121.1.6.1.2 | INTEGER {ct0(1), ct1(2), ct2(3), ct3(4), ct4(5), ct5(6), ct6(7), ct7(8)} | read-only | current |
| hwMplsTeClassPriority OBJECT-TYPE This value represents the preemption priority (setup or holding) supported for a particular class-type, on the LSR. Range: 0-7 Default: 7 | 1.3.6.1.4.1.2011.5.25.121.1.6.1.3 | Unsigned32 | read-only | current |
| hwMplsTeClassDescription OBJECT-TYPE Textual description of the TE-Class defined by this row. | 1.3.6.1.4.1.2011.5.25.121.1.6.1.4 | OCTET STRING | read-only | current |
| hwMplsIfBcTable OBJECT-TYPE This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this table is ifIndex. | 1.3.6.1.4.1.2011.5.25.121.1.7 | not-accessible | current | |
| hwMplsIfBcEntry OBJECT-TYPE This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this entry is ifIndex. | 1.3.6.1.4.1.2011.5.25.121.1.7.1 | not-accessible | current | |
| hwMplsIfMaxResvBandwidth OBJECT-TYPE The maximum reservable bandwidth on this interface. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.1 | Unsigned32 | read-only | current |
| hwMplsIfBc0Bandwidth OBJECT-TYPE The bandwidth of Class-Type 0 (CT0) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.2 | Unsigned32 | read-only | current |
| hwMplsIfBc1Bandwidth OBJECT-TYPE The bandwidth of Class-Type 1 (CT1) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.3 | Unsigned32 | read-only | current |
| hwMplsIfBc2Bandwidth OBJECT-TYPE The bandwidth of Class-Type 2 (CT2) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.4 | Unsigned32 | read-only | current |
| hwMplsIfBc3Bandwidth OBJECT-TYPE The bandwidth of Class-Type 3 (CT3) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.5 | Unsigned32 | read-only | current |
| hwMplsIfBc4Bandwidth OBJECT-TYPE The bandwidth of Class-Type 4 (CT4) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.6 | Unsigned32 | read-only | current |
| hwMplsIfBc5Bandwidth OBJECT-TYPE The bandwidth of Class-Type 5 (CT5) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.7 | Unsigned32 | read-only | current |
| hwMplsIfBc6Bandwidth OBJECT-TYPE The bandwidth of Class-Type 6 (CT6) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.8 | Unsigned32 | read-only | current |
| hwMplsIfBc7Bandwidth OBJECT-TYPE The bandwidth of Class-Type 7 (CT7) in this tunnel. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.7.1.9 | Unsigned32 | read-only | current |
| hwStaticLspTnlTable OBJECT-TYPE hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this table is hwStaticLspTnlName. | 1.3.6.1.4.1.2011.5.25.121.1.8 | not-accessible | current | |
| hwStaticLspTnlEntry OBJECT-TYPE hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this entry is hwStaticLspTnlName. | 1.3.6.1.4.1.2011.5.25.121.1.8.1 | not-accessible | current | |
| hwStaticLspTnlName OBJECT-TYPE Indicates the name of the Static Lsp. | 1.3.6.1.4.1.2011.5.25.121.1.8.1.1 | SnmpAdminString | not-accessible | current |
| hwStaticLspTnlToken OBJECT-TYPE Indicates the token of the Static Lsp. | 1.3.6.1.4.1.2011.5.25.121.1.8.1.2 | Unsigned32 | read-only | current |
| hwMplsTeVpnQosTable OBJECT-TYPE This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this table is hwMplsTnlID. | 1.3.6.1.4.1.2011.5.25.121.1.9 | not-accessible | current | |
| hwMplsTeVpnQosEntry OBJECT-TYPE This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this entry is hwMplsTnlID. | 1.3.6.1.4.1.2011.5.25.121.1.9.1 | not-accessible | current | |
| hwMplsTnlID OBJECT-TYPE The value of this object identifies the TE tunnel ID. | 1.3.6.1.4.1.2011.5.25.121.1.9.1.1 | Unsigned32 | not-accessible | current |
| hwMplsTeVpnMaxBandwidth OBJECT-TYPE The value of this object identifies the bandwidth the TE tunnel can provide for VPN QoS. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.9.1.2 | Unsigned32 | read-only | current |
| hwMplsTeVpnAllocatedBandwidth OBJECT-TYPE The value of this object identifies the bandwidth used by VPN QoS, in Kbps. Unit: kbit/s | 1.3.6.1.4.1.2011.5.25.121.1.9.1.3 | Unsigned32 | read-only | current |
| hwStaticLspInIfIndex OBJECT-TYPE Indicates the inbound interface index of a static LSP/CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.1.11 | OCTET STRING | accessible-for-notify | current |
| hwStaticLspInIfName OBJECT-TYPE Indicates the name of an inbound interface of a static LSP/CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.1.12 | OCTET STRING | accessible-for-notify | current |
| hwStaticLspDownReason OBJECT-TYPE Indicates the reason for static LSP/CR-LSP Down: 0. Other 1. Static LSP/CR-LSP up 2. MPLS disabled on an interface 3. MPLS TE disabled on an interface 4. Route change 5. Tunnel binding associated with the static LSP/CR-LSP deleted 6. Static LSP/CR-LSP configuration delete 7. Inbound interface Down 8. Outbound interface Down 9. Tunnel associated with the static LSP/CR-LSP has been shut down 10. Static LSP/CR-LSP configuration update 11. The bound ring is invalid. | 1.3.6.1.4.1.2011.5.25.121.1.13 | Integer32 | accessible-for-notify | current |
| hwMplsTunnelStatisticsTable OBJECT-TYPE A tunnel needs to be uniquely identified across an MPLS network. hwMplsTunnelStatisticsTunnelIndex uniquely identifies a tunnel on the LSR originating the tunnel. hwMplsTunnelStatisticsIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelStatisticsEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelStatisticsTunnelIndex, hwMplsTunnelStatisticsIngressLSRId and hwMplsTunnelStatisticsEgressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.14 | not-accessible | current | |
| hwMplsTunnelStatisticsEntry OBJECT-TYPE A tunnel needs to be uniquely identified across an MPLS network. hwMplsTunnelStatisticsTunnelIndex uniquely identifies a tunnel on the LSR originating the tunnel. hwMplsTunnelStatisticsIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelStatisticsEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelStatisticsTunnelIndex, hwMplsTunnelStatisticsIngressLSRId and hwMplsTunnelStatisticsEgressLSRId. | 1.3.6.1.4.1.2011.5.25.121.1.14.1 | not-accessible | current | |
| hwMplsTunnelStatisticsTunnelIndex OBJECT-TYPE Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.14.1.1 | Unsigned32 | not-accessible | current |
| hwMplsTunnelStatisticsIngressLSRId OBJECT-TYPE Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.14.1.2 | IpAddress | not-accessible | current |
| hwMplsTunnelStatisticsEgressLSRId OBJECT-TYPE Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB. | 1.3.6.1.4.1.2011.5.25.121.1.14.1.3 | IpAddress | not-accessible | current |
| hwMplsTunnelStatisticsHCInOctets OBJECT-TYPE The total number of octets received on the interface, including framing characters. | 1.3.6.1.4.1.2011.5.25.121.1.14.1.4 | Counter64 | read-only | current |
| hwMplsTunnelStatisticsHCOutOctets OBJECT-TYPE The total number of octets transmitted out of the interface, including framing characters. | 1.3.6.1.4.1.2011.5.25.121.1.14.1.5 | Counter64 | read-only | current |
| hwMplsExtendTrap OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.2 | |||
| hwLspTrap OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.2.1 | |||
| hwMplsTrapObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.2.2 | |||
| hwMplsTunnelIfName OBJECT-TYPE The Tunnel Interface name. | 1.3.6.1.4.1.2011.5.25.121.2.2.1 | SnmpAdminString | accessible-for-notify | obsolete |
| hwMplsTunnelFrrConfigOper OBJECT-TYPE The value of this object identifies the operation that an FRR configuration is committed on the tunnel. Options: 1.unconfig(0) -indicates the configuration of the undo mpls te fast-reroute command is committed. 2.config(1) -indicates the configuration of the mpls te fast-reroute command is committed. 3.unknow(2) -indicates an unknown operation. | 1.3.6.1.4.1.2011.5.25.121.2.2.2 | INTEGER {unconfig(0), config(1), unknow(2)} | accessible-for-notify | obsolete |
| hwMplsTunnelDownReason OBJECT-TYPE Indicates the alarm reason as below: 1. Other; 2. Static LSP down; 3. Static CR-LSP down; 4. The out interface of the RSVP LSP ingress is down; 5. The resource of RSVP LSP is preempted; 6. RSVP message timeout; 7. RSVP neighbor lost; 8. The bypass-tunnel is down or is unbinded with main tunnel, as bypass-tunnel is in used; 9. CSPF compute fail; 10.User shutdown the tunnel; 11.TPOAM indicates the connectivity fault of the link; 12.TPOAM indicates receive alarm indication signal defect of the link; 13.TPOAM indicates the remote defect of the link; 14.TPOAM indicates receive unexpected MEG-ID defect of the link; 15.TPOAM indicates receive unexpected MEP-ID defect of the link; 16.TPOAM indicates packet lost exceed signal fault threshold in the local link; 17.TPOAM indicates packet unexpected period defect of the link; 18.MPLS OAM connectivity fault; 19.MPLS OAM TTSI excess; 20.MPLS OAM TTSI mismatch; 21.MPLS OAM TTSI merge error; 22.MPLS OAM unknown error; 23.MPLS OAM BDI; 24.MPLS OAM FDI; 25.MPLS OAM signal fail; 26.MPLS OAM signal degrade; 27.MPLS OAM fail; 28.Service resume; 29.Service delete; 100. Clear. | 1.3.6.1.4.1.2011.5.25.121.2.2.3 | INTEGER {other(1), staticLspDown(2), staticCrlspDown(3), outIfDown(4), resourcePreempted(5), rsvpMessageTimeout(6), rsvpNeighborLost(7), bypassTunnelDownOrUnbinded(8), cspfComputeFail(9), userShutdown(10), tpoamLossOfContinuity(11), tpoamAlarmIndicationSignal(12), tpoamRemoteDefectIndication(13), tpoamUnexpectedMEG(14), tpoamUnexpectedMEP(15), tpoamLossSF(16), tpoamPeriod(17), mplsOamLocv(18), mplsOamExcess(19), mplsOamMisMatch(20), mplsOamMisMerge(21), mplsOamUnknown(22), mplsOamBdi(23), mplsOamFdi(24), mplsOamSF(25), mplsOamSD(26), mplsOamDOamFail(27), serviceResume(28), serviceDelete(29), clear(100)} | accessible-for-notify | current |
| hwMplsLspProtocol OBJECT-TYPE The value of this object identifies the protocol of the lsp which exceeds the threshold or total count. Options: 1.ldp(1) -indicates the lsp is ldp lsp. 2.bgp(2) -indicates the lsp is bgp lsp. 3.bgpv6(3) -indicates the lsp is bgpv6 lsp. 4.ldpfrr(4) -indicates the lsp is ldp frr lsp. 5.rsvp(5) -indicates the lsp is rsvp te lsp. 6.totalLsp(6) -indicates the lsp is total lsp. 7.totalCrLsp(7) -indicates the lsp is total cr-lsp. 8.ldpIngress(8) -indicates the lsp is ldp ingress lsp. 9.ldpTransit(9) -indicates the lsp is ldp transit lsp. 10.ldpEgress(10) -indicates the lsp is ldp egress lsp. 11.bgpIngress(11) -indicates the lsp is bgp ingress lsp. 12.bgpEgress(12) -indicates the lsp is bgp egress lsp. 13.bgpv6Ingress(13) -indicates the lsp is bgpv6 ingress lsp. 14.bgpv6Egress(14) -indicates the lsp is bgpv6 egress lsp. 15.rsvpIngress(15) -indicates the lsp is rsvp te ingress lsp. 16.rsvpTransit(16) -indicates the lsp is rsvp te transit lsp. 17.rsvpEgress(17) -indicates the lsp is rsvp te egress lsp. 18.totalLspIngress(18) -indicates the lsp is total ingress lsp. 19.totalLspTransit(19) -indicates the lsp is total transit lsp. 20.totalLspEgress(20) -indicates the lsp is total egress lsp. 21.totalCrLspIngress(21) -indicates the lsp is total ingress cr-lsp. 22.totalCrLspTransit(22) -indicates the lsp is total transit cr-lsp. 23.totalCrLspEgress(23) -indicates the lsp is total egress cr-lsp. 24.totalPublicNetLspIngressTransit(24) -indicates the lsp is total ingress and transit public netwrok lsp. 25.totalPublicNetLspTransitEgress(25) -indicates the lsp is total transit and egress public network cr-lsp. 26.privateNetBgp(26) -indicates the lsp is private network bgp lsp. 27.unknown(100) -indicates the lsp type is unknown. | 1.3.6.1.4.1.2011.5.25.121.2.2.4 | INTEGER {ldp(1), bgp(2), bgpv6(3), ldpfrr(4), rsvp(5), totalLsp(6), totalCrLsp(7), ldpIngress(8), ldpTransit(9), ldpEgress(10), bgpIngress(11), bgpEgress(12), bgpv6Ingress(13), bgpv6Egress(14), rsvpIngress(15), rsvpTransit(16), rsvpEgress(17), totalLspIngress(18), totalLspTransit(19), totalLspEgress(20), totalCrLspIngress(21), totalCrLspTransit(22), totalCrLspEgress(23), totalPublicNetLspIngressTransit(24), totalPublicNetLspTransitEgress(25), privateNetBgp(26), unknown(100)} | accessible-for-notify | current |
| hwMplsLspThreshold OBJECT-TYPE The value of this object identifies the threshold of the lsp. | 1.3.6.1.4.1.2011.5.25.121.2.2.5 | Integer32 | accessible-for-notify | current |
| hwMplsLspTotalCount OBJECT-TYPE The value of this object identifies the total permit count of lsp. | 1.3.6.1.4.1.2011.5.25.121.2.2.6 | Integer32 | accessible-for-notify | current |
| hwMplsLspCurrentCount OBJECT-TYPE The value of this object identifies the current count of the lsp. | 1.3.6.1.4.1.2011.5.25.121.2.2.7 | Integer32 | accessible-for-notify | current |
| hwMplsTunnelDownLSRID OBJECT-TYPE The value of this object identifies the LSR ID of the error node on a tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.2.8 | MplsLsrIdentifier | accessible-for-notify | current |
| hwMplsTunnelDownIfIpAddr OBJECT-TYPE The value of this object identifies the IP address of the error interface on a tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.2.9 | InetAddress | accessible-for-notify | current |
| hwMplsTunnelDownIfIpAddrType OBJECT-TYPE The value of this object identifies the IP address type of the error interface on a tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.2.10 | InetAddressType | accessible-for-notify | current |
| hwMplsResourceType OBJECT-TYPE The value of this object identifies that the number of MPLS resources has exceeded the threshold or the maximum number. Options: 1.autoBypassTunnelIf(1) -Indicates that the resource is auto bypass tunnel interface. 2.p2mpAutoTunnelIf(2) -Indicates that the resource is P2MP auto tunnel interface. 3.teBfd(3) -Indicates that the resource is dynamic BFD for TE LSP. 4.ldpBfd(4) -Indicates that the resource is dynamic BFD for LDP LSP. 5.mldpTotalTree(5) -Indicates that the resource is the total number of MLDP trees. 6.mldpTotalBranch(6) -Indicates that the resource is the total number of MLDP branches. 7.ldpTotalRemoteAdjacency(7) -Indicates that the resource is LDP total remote adjacency. 8.outSegment(8) -Indicates that the resource is LDP outSegment. 9.autoPrimaryTunnelIf(9) -Indicates that the resource is auto primary tunnel interface. 10.ldpTotalLocalAdjacency(10) -Indicates that the resource is LDP total local adjacency. 11.cspfNode(11) -Indicates that the resource is cspf node. 12.cspfLink(12) -Indicates that the resource is cspf link. 13.cspfNlsa(13) -Indicates that the resource is cspf nlsa. 14.cspfSrlg(14) -Indicates that the resource is cspf srlg. 15.unknown(100) -Indicates that the resource type is unknown. | 1.3.6.1.4.1.2011.5.25.121.2.2.11 | INTEGER {autoBypassTunnelIf(1), p2mpAutoTunnelIf(2), teBfd(3), ldpBfd(4), mldpTotalTree(5), mldpTotalBranch(6), ldpTotalRemoteAdjacency(7), outSegment(8), autoPrimaryTunnelIf(9), ldpTotalLocalAdjacency(10), cspfNode(11), cspfLink(12), cspfNlsa(13), cspfSrlg(14), unknown(100)} | accessible-for-notify | current |
| hwMplsResourceCurrentCount OBJECT-TYPE The value of this object identifies the number of the resources. | 1.3.6.1.4.1.2011.5.25.121.2.2.12 | Integer32 | accessible-for-notify | current |
| hwMplsResourceThreshold OBJECT-TYPE The value of this object identifies the threshold for the number of the resources. | 1.3.6.1.4.1.2011.5.25.121.2.2.13 | Integer32 | accessible-for-notify | current |
| hwMplsResourceTotalCount OBJECT-TYPE The value of this object identifies the maximum number of allowed resources. | 1.3.6.1.4.1.2011.5.25.121.2.2.14 | Integer32 | accessible-for-notify | current |
| hwMplsSessionTunnelId OBJECT-TYPE The value of this object identifies the Tunnel ID. | 1.3.6.1.4.1.2011.5.25.121.2.2.15 | Integer32 | accessible-for-notify | current |
| hwMplsLocalLspId OBJECT-TYPE The value of this object identifies the LSP ID. | 1.3.6.1.4.1.2011.5.25.121.2.2.16 | Integer32 | accessible-for-notify | current |
| hwMplsIngressLsrId OBJECT-TYPE The value of this object identifies the ingress LSR ID. | 1.3.6.1.4.1.2011.5.25.121.2.2.17 | MplsLsrIdentifier | accessible-for-notify | current |
| hwMplsEgressLsrId OBJECT-TYPE The value of this object identifies the egress LSR ID. | 1.3.6.1.4.1.2011.5.25.121.2.2.18 | MplsLsrIdentifier | accessible-for-notify | current |
| hwMplsLspName OBJECT-TYPE This object indicates the name of an bidirectional static CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.2.19 | SnmpAdminString | accessible-for-notify | current |
| hwMplsGlobalObject OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.3 | |||
| hwMplsGlobalWorkMode OBJECT-TYPE The work mode of DS-TE system, default mode is nonstandard. Options: 1. standard(1) -indicates work mode of DS-TE system is standard 2. nonstandard(2) -indicates work mode of DS-TE system is nonstandard | 1.3.6.1.4.1.2011.5.25.121.3.1 | INTEGER {standard(1), nonstandard(2)} | read-only | current |
| hwMplsGlobalBcModel OBJECT-TYPE Bandwidth Constraint Model currently used by this LSR. Options: 1. rdm(1) -indicates that the bandwidth constraint model is RDM. 2. mam(2) -indicates that the bandwidth constraint model is MAM. 3. extendMam(3) -indicates that the bandwidth constraint model is ExtendMam. | 1.3.6.1.4.1.2011.5.25.121.3.2 | INTEGER {rdm(1), mam(2), extendMam(3)} | read-only | current |
| hwMplsDynamicLabelTotalCount OBJECT-TYPE The value of this object identifies the total permit count of dynamic label. | 1.3.6.1.4.1.2011.5.25.121.3.3 | Unsigned32 | read-only | current |
| hwMplsDynamicLabelCurrentCount OBJECT-TYPE The value of this object identifies the current count of the dynamic label. | 1.3.6.1.4.1.2011.5.25.121.3.4 | Unsigned32 | read-only | current |
| hwMplsDynamicLabelThresholdUpperLimit OBJECT-TYPE The upper limit threshold value (%) of dynamic label, default value is 80. | 1.3.6.1.4.1.2011.5.25.121.3.5 | Unsigned32 | read-only | current |
| hwMplsDynamicLabelThresholdLowerLimit OBJECT-TYPE The lower limit threshold value (%) of dynamic label, default value is 70. | 1.3.6.1.4.1.2011.5.25.121.3.6 | Unsigned32 | read-only | current |
| hwMplsLspStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.4 | |||
| hwMplsLspStatisticsTable OBJECT-TYPE hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this table is hwMplsLspStatisticsLspType. | 1.3.6.1.4.1.2011.5.25.121.4.1 | not-accessible | current | |
| hwMplsLspStatisticsEntry OBJECT-TYPE hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this entry is hwMplsLspStatisticsLspType. | 1.3.6.1.4.1.2011.5.25.121.4.1.1 | not-accessible | current | |
| hwMplsLspStatisticsLspType OBJECT-TYPE This object indicates the LSP type. Options: 1. staticLsp(1) -indicates the static LSP. 2. staticCrLsp(2) -indicates the static CR-LSP. 3. ldpLsp(3) -indicates the LDP LSP. 4. rsvpCrLsp(4) -indicates the RSVP LSP. 5. bgpLsp(5) -indicates the BGP LSP. 6. asbrLsp(6) -indicates the ASBR LSP. 7. bgpIpv6Lsp(7) -indicates the BGP IPv6 LSP. 8. l3vpnIpv6Lsp(8)-indicates the L3VPN IPv6 LSP. | 1.3.6.1.4.1.2011.5.25.121.4.1.1.1 | INTEGER {staticLsp(1), staticCrLsp(2), ldpLsp(3), rsvpCrLsp(4), bgpLsp(5), asbrLsp(6), bgpIpv6Lsp(7), l3vpnIpv6Lsp(8)} | not-accessible | current |
| hwMplsLspStatisticsIngressLspCount OBJECT-TYPE This object indicates the number of ingress LSPs of a specified type. | 1.3.6.1.4.1.2011.5.25.121.4.1.1.2 | Unsigned32 | read-only | current |
| hwMplsLspStatisticsTransitLspCount OBJECT-TYPE This object indicates the number of transit LSPs of a specified type. | 1.3.6.1.4.1.2011.5.25.121.4.1.1.3 | Unsigned32 | read-only | current |
| hwMplsLspStatisticsEgressLspCount OBJECT-TYPE This object indicates the number of egress LSPs of a specified type. | 1.3.6.1.4.1.2011.5.25.121.4.1.1.4 | Unsigned32 | read-only | current |
| hwMplsLspStatisticsTotalLspCount OBJECT-TYPE This object indicates the total number of the ingress LSPs, transit LSPs and egress LSP of specified types. | 1.3.6.1.4.1.2011.5.25.121.4.1.1.5 | Unsigned32 | read-only | current |
| hwMplsTrafficStatisticsStaticLspTable OBJECT-TYPE Indicates the traffic statistics of a LSP. The indexes of this table is hwMplsTrafficStatisticsStaticLspName. | 1.3.6.1.4.1.2011.5.25.121.4.2 | not-accessible | current | |
| hwMplsTrafficStatisticsStaticLspEntry OBJECT-TYPE Indicates the traffic statistics of a LSP. The indexes of this entry is hwMplsTrafficStatisticsStaticLspName. | 1.3.6.1.4.1.2011.5.25.121.4.2.1 | not-accessible | current | |
| hwMplsTrafficStatisticsStaticLspName OBJECT-TYPE Indicates the name of the static LSP or CR-LSP. The name is appointed when the static LSP or CR-LSP is created. | 1.3.6.1.4.1.2011.5.25.121.4.2.1.1 | SnmpAdminString | not-accessible | current |
| hwMplsTrafficStatisticsStaticLspForwardInBytes OBJECT-TYPE An estimate of the forward of bistatic LSP's current incoming traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes | 1.3.6.1.4.1.2011.5.25.121.4.2.1.2 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspForwardInPackets OBJECT-TYPE An estimate of the forward of bistatic LSP's current incoming traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets | 1.3.6.1.4.1.2011.5.25.121.4.2.1.3 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspForwardOutBytes OBJECT-TYPE An estimate of the forward of bistatic LSP's current outgoing traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes | 1.3.6.1.4.1.2011.5.25.121.4.2.1.4 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspForwardOutPackets OBJECT-TYPE An estimate of the forward of bistatic LSP's current outgoing traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets | 1.3.6.1.4.1.2011.5.25.121.4.2.1.5 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspBackwardInBytes OBJECT-TYPE An estimate of the backward of bistatic LSP's current incoming traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes | 1.3.6.1.4.1.2011.5.25.121.4.2.1.6 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspBackwardInPackets OBJECT-TYPE An estimate of the backward of bistatic LSP's current incoming traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets | 1.3.6.1.4.1.2011.5.25.121.4.2.1.7 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspBackwardOutBytes OBJECT-TYPE An estimate of the backward of bistatic LSP's current outgoing traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes | 1.3.6.1.4.1.2011.5.25.121.4.2.1.8 | Counter64 | read-only | current |
| hwMplsTrafficStatisticsStaticLspBackwardOutPackets OBJECT-TYPE An estimate of the backward of bistatic LSP's current outgoing traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets | 1.3.6.1.4.1.2011.5.25.121.4.2.1.9 | Counter64 | read-only | current |
| hwMplsExtendConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.6 | |||
| hwMplsExtendGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.6.1 | |||
| hwMplsExtendCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.6.2 | |||
| hwMplsRingMib OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.7 | |||
| hwMplsRingTable OBJECT-TYPE Indicates the table information of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1 | not-accessible | current | |
| hwMplsRingEntry OBJECT-TYPE Indicates the table information of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1 | not-accessible | current | |
| hwMplsRingID OBJECT-TYPE Indicates the ID of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1.1 | Unsigned32 | not-accessible | current |
| hwMplsRingNodeID OBJECT-TYPE Indicates the ID of the current Node on the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1.2 | Unsigned32 | read-only | current |
| hwMplsRingName OBJECT-TYPE Indicates the name of MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1.3 | OCTET STRING | read-only | current |
| hwMplsRingDirection OBJECT-TYPE Indicates the direction of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1.4 | OCTET STRING | read-only | current |
| hwMplsRingSwitchReason OBJECT-TYPE Indicates the switch reason of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.1.1.5 | OCTET STRING | read-only | current |
| hwMplsRingTrap OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.121.7.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwMplsStaticLspUp NOTIFICATION-TYPE This notification indicates that the status of referred static LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.1 | current |
| hwMplsStaticLspDown NOTIFICATION-TYPE This notification indicates that the status of referred static LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.2 | current |
| hwMplsStaticCRLspUp NOTIFICATION-TYPE This notification indicates that the status of referred static CR-LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.3 | current |
| hwMplsStaticCRLspDown NOTIFICATION-TYPE This notification indicates that the status of referred static CR-LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.4 | current |
| hwMplsTeFrrProtAval NOTIFICATION-TYPE This notification indicates that the primary tunnel is bound to TE FRR bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.1.5 | current |
| hwMplsTeFrrProtNotAval NOTIFICATION-TYPE This notification indicates that the primary tunnel is unbound to bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.1.6 | current |
| hwMplsTeFrrSwitch NOTIFICATION-TYPE This notification indicates that the primary tunnel is switches to the TE FRR bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.1.7 | current |
| hwMplsTeFrrResume NOTIFICATION-TYPE This notification indicates that the primary tunnel is switched back from the TE FRR bypass tunnel. | 1.3.6.1.4.1.2011.5.25.121.2.1.8 | current |
| hwMplsTunnelHSBSwitch NOTIFICATION-TYPE This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.9 | current |
| hwMplsTunnelHSBResume NOTIFICATION-TYPE This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.10 | current |
| hwMplsTunnelOBSwitch NOTIFICATION-TYPE This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up. | 1.3.6.1.4.1.2011.5.25.121.2.1.11 | current |
| hwMplsTunnelOBResume NOTIFICATION-TYPE This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.12 | current |
| hwMplsTunnelUp NOTIFICATION-TYPE The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.13 | obsolete |
| hwMplsTunnelDown NOTIFICATION-TYPE The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.14 | obsolete |
| hwMplsTunnelChangeBw NOTIFICATION-TYPE This notification indicates that the bandwidth of the tunnel is changed. | 1.3.6.1.4.1.2011.5.25.121.2.1.15 | current |
| hwMplsTunnelTpOamLossSD NOTIFICATION-TYPE This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.16 | current |
| hwMplsOamSDRecovery NOTIFICATION-TYPE This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.17 | current |
| hwMplsOamLoss NOTIFICATION-TYPE This object indicates that TP OAM detected tunnel connectivity faults. | 1.3.6.1.4.1.2011.5.25.121.2.1.18 | current |
| hwMplsOamLossRecovery NOTIFICATION-TYPE This object indicates that TP OAM did not detect tunnel connectivity faults. | 1.3.6.1.4.1.2011.5.25.121.2.1.19 | current |
| hwMplsOamAis NOTIFICATION-TYPE This object indicates that TP OAM detected an alarm indication signal. | 1.3.6.1.4.1.2011.5.25.121.2.1.20 | current |
| hwMplsOamAisRecovery NOTIFICATION-TYPE This object indicates that TP OAM no longer detected alarm indication signals. | 1.3.6.1.4.1.2011.5.25.121.2.1.21 | current |
| hwMplsOamRdi NOTIFICATION-TYPE This object indicates that TP OAM detected remote defects. | 1.3.6.1.4.1.2011.5.25.121.2.1.22 | current |
| hwMplsOamRdiRecovery NOTIFICATION-TYPE This object indicates that the remote defects detected by TP OAM were removed. | 1.3.6.1.4.1.2011.5.25.121.2.1.23 | current |
| hwMplsOamMeg NOTIFICATION-TYPE This object indicates that the names configured on the two ends of the tunnel are inconsistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.24 | current |
| hwMplsOamMegRecovery NOTIFICATION-TYPE This object indicates that the names configured on the two ends of the tunnel now are consistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.25 | current |
| hwMplsOamMep NOTIFICATION-TYPE This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.26 | current |
| hwMplsOamMepRecovery NOTIFICATION-TYPE This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.27 | current |
| hwMplsOamSF NOTIFICATION-TYPE This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link. | 1.3.6.1.4.1.2011.5.25.121.2.1.28 | current |
| hwMplsOamSFRecovery NOTIFICATION-TYPE This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link. | 1.3.6.1.4.1.2011.5.25.121.2.1.29 | current |
| hwMplsOamPeriod NOTIFICATION-TYPE This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.30 | current |
| hwMplsOamPeriodRecovery NOTIFICATION-TYPE This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent. | 1.3.6.1.4.1.2011.5.25.121.2.1.31 | current |
| hwMplsOamLck NOTIFICATION-TYPE This object indicates that TP OAM detected the service level of the tunnel has been locked. | 1.3.6.1.4.1.2011.5.25.121.2.1.32 | current |
| hwMplsOamLckRecovery NOTIFICATION-TYPE This object indicates that TP OAM detected the service level of the tunnel has not been locked. | 1.3.6.1.4.1.2011.5.25.121.2.1.33 | current |
| hwMplsOamExcess NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received excess alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.34 | current |
| hwMplsOamExcessRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received excess alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.35 | current |
| hwMplsOamMisMatch NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received MisMatch alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.36 | current |
| hwMplsOamMisMatchRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.37 | current |
| hwMplsOamMisMerge NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received MisMerge alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.38 | current |
| hwMplsOamMisMergeRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.39 | current |
| hwMplsOamUnknown NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received Unknown alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.40 | current |
| hwMplsOamUnknownRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received Unknown alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.41 | current |
| hwMplsOamBDI NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received BDI alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.42 | current |
| hwMplsOamBDIRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received BDI alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.43 | current |
| hwMplsOamFail NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm. | 1.3.6.1.4.1.2011.5.25.121.2.1.44 | current |
| hwMplsOamFailRecovery NOTIFICATION-TYPE This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end. | 1.3.6.1.4.1.2011.5.25.121.2.1.45 | current |
| hwMplsTunnelPrimaryUp NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Primary LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.46 | current |
| hwMplsTunnelPrimaryDown NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Primary LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.47 | current |
| hwMplsTunnelHotstandbyUp NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.48 | current |
| hwMplsTunnelHotstandbyDown NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.49 | current |
| hwMplsTunnelOrdinaryUp NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.50 | current |
| hwMplsTunnelOrdinaryDown NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.51 | current |
| hwMplsTunnelBesteffortUp NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.52 | current |
| hwMplsTunnelBesteffortDown NOTIFICATION-TYPE This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.53 | current |
| hwMplsTeAutoTunnelDownClear NOTIFICATION-TYPE This notification indicates that the TE Auto tunnel Down alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.2.1.54 | current |
| hwMplsTeAutoTunnelPrimaryDownClear NOTIFICATION-TYPE This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared. | 1.3.6.1.4.1.2011.5.25.121.2.1.55 | current |
| hwMplsTunnelBBSwitch NOTIFICATION-TYPE This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up. | 1.3.6.1.4.1.2011.5.25.121.2.1.56 | current |
| hwMplsTunnelBBResume NOTIFICATION-TYPE This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.57 | current |
| hwMplsExtTunnelDown NOTIFICATION-TYPE This notification indicates that the status of te tunnel changes to Down. | 1.3.6.1.4.1.2011.5.25.121.2.1.58 | current |
| hwMplsExtTunnelDownClear NOTIFICATION-TYPE This notification indicates that the down alarm of te tunnel was cleared. | 1.3.6.1.4.1.2011.5.25.121.2.1.59 | current |
| hwMplsOamLocalLock NOTIFICATION-TYPE This object indicates that TP OAM detected the tunnel has been locked. | 1.3.6.1.4.1.2011.5.25.121.2.1.60 | current |
| hwMplsOamLocalLockRecovery NOTIFICATION-TYPE This object indicates that TP OAM detected the tunnel has not been locked. | 1.3.6.1.4.1.2011.5.25.121.2.1.61 | current |
| hwMplsTunnelDelete NOTIFICATION-TYPE This notification indicates that the mpls te tunnel was deleted. | 1.3.6.1.4.1.2011.5.25.121.2.1.62 | current |
| hwMplsLspThresholdExceed NOTIFICATION-TYPE This object indicates that lsp count has exceeded the threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.63 | current |
| hwMplsLspThresholdExceedClear NOTIFICATION-TYPE This object indicates that lsp count has resumed from exceeding the threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.64 | current |
| hwMplsLspTotalCountExceed NOTIFICATION-TYPE This object indicates that lsp count has reached the total count. | 1.3.6.1.4.1.2011.5.25.121.2.1.65 | current |
| hwMplsLspTotalCountExceedClear NOTIFICATION-TYPE This object indicates that lsp count has resumed from reaching the total count. | 1.3.6.1.4.1.2011.5.25.121.2.1.66 | current |
| hwMplsDynamicLabelThresholdExceed NOTIFICATION-TYPE This object indicates that label usage has exceeded the threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.67 | current |
| hwMplsDynamicLabelThresholdExceedClear NOTIFICATION-TYPE This object indicates that label usage has resumed from exceeding the threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.68 | current |
| hwMplsDynamicLabelTotalCountExceed NOTIFICATION-TYPE This object indicates that label count has reached the total count. | 1.3.6.1.4.1.2011.5.25.121.2.1.69 | current |
| hwMplsDynamicLabelTotalCountExceedClear NOTIFICATION-TYPE This object indicates that label usage count has resumed from reaching the total count. | 1.3.6.1.4.1.2011.5.25.121.2.1.70 | current |
| hwMplsResourceThresholdExceed NOTIFICATION-TYPE This object indicates that the number of MPLS resources has exceeded the upper threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.71 | current |
| hwMplsResourceThresholdExceedClear NOTIFICATION-TYPE This object indicates that the number of MPLS resources has fallen below the lower threshold. | 1.3.6.1.4.1.2011.5.25.121.2.1.72 | current |
| hwMplsResourceTotalCountExceed NOTIFICATION-TYPE This object indicates that the number of MPLS resources has reached the maximum number. | 1.3.6.1.4.1.2011.5.25.121.2.1.73 | current |
| hwMplsResourceTotalCountExceedClear NOTIFICATION-TYPE This object indicates that the number of MPLS resources fallen below the recovery number. | 1.3.6.1.4.1.2011.5.25.121.2.1.74 | current |
| hwMplsLspLoopBack NOTIFICATION-TYPE This object indicates that the lsp was looped back. | 1.3.6.1.4.1.2011.5.25.121.2.1.75 | current |
| hwMplsLspLoopBackClear NOTIFICATION-TYPE This object indicates that loopback of the LSP is restored. | 1.3.6.1.4.1.2011.5.25.121.2.1.76 | current |
| hwMplsTunnelCommitLost NOTIFICATION-TYPE This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits only some MPLS tunnel configurations. | 1.3.6.1.4.1.2011.5.25.121.2.1.77 | current |
| hwMplsTunnelCommitLostClear NOTIFICATION-TYPE This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits all MPLS tunnel configurations. | 1.3.6.1.4.1.2011.5.25.121.2.1.78 | current |
| hwMplsTunnelHotstandbySwitch NOTIFICATION-TYPE This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.79 | current |
| hwMplsTunnelHotstandbyResume NOTIFICATION-TYPE This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | 1.3.6.1.4.1.2011.5.25.121.2.1.80 | current |
| hwMplsTunnelBfdPathMismatch NOTIFICATION-TYPE This notification indicates the forward primary LSP path is the same as the reverse hot-standby LSP path, and the reverse primary LSP path is the same as the forward hot-standby LSP path, causing path mismatches. | 1.3.6.1.4.1.2011.5.25.121.2.1.81 | current |
| hwMplsTunnelBfdPathMismatchClear NOTIFICATION-TYPE This notification indicates that either or both path mismatches were rectified. | 1.3.6.1.4.1.2011.5.25.121.2.1.82 | current |
| hwMplsTeLspBfdDown NOTIFICATION-TYPE This notification indicates the bfd status of te-lsp changes to down. | 1.3.6.1.4.1.2011.5.25.121.2.1.83 | current |
| hwMplsTeLspBfdDownClear NOTIFICATION-TYPE This notification indicates that the down alarm of bfd was cleared. | 1.3.6.1.4.1.2011.5.25.121.2.1.84 | current |
| hwMplsTunnelDelegationReturn NOTIFICATION-TYPE This notification indicates that the delegation of Tunnel LSP is returned by server. | 1.3.6.1.4.1.2011.5.25.121.2.1.85 | current |
| hwMplsTunnelDelegationReturnClear NOTIFICATION-TYPE This notification indicates that the delegation of Tunnel LSP is returned by server. | 1.3.6.1.4.1.2011.5.25.121.2.1.86 | current |
| hwMplsTunnelFrrConfigChange NOTIFICATION-TYPE When the trap indicating that TE-Frr configuration of Tunnel is changed is sent, the cause for the change of TE-FRR configuration of Tunnel is displayed. | 1.3.6.1.4.1.2011.5.25.121.2.3 | obsolete |
| hwMplsRingSwitch NOTIFICATION-TYPE The notification indicates that the MPLS ring switched. | 1.3.6.1.4.1.2011.5.25.121.7.2.1 | obsolete |
| hwMplsRingResume NOTIFICATION-TYPE The notification indicates that the MPLS ring resumed. | 1.3.6.1.4.1.2011.5.25.121.7.2.2 | obsolete |
| hwMplsRingWestOamLoss NOTIFICATION-TYPE The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.3 | current |
| hwMplsRingWestOamLossClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamLoss alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.4 | current |
| hwMplsRingEastOamLoss NOTIFICATION-TYPE The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.5 | current |
| hwMplsRingEastOamLossClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamLoss alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.6 | current |
| hwMplsRingWestOamRDI NOTIFICATION-TYPE The notification indicates that RDI packets are received in the west of the MPLS ring, indicating that a fault occurs on the forward ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.7 | current |
| hwMplsRingWestOamRDIClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamRDI alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.8 | current |
| hwMplsRingEastOamRDI NOTIFICATION-TYPE The notification indicates that RDI packets are received in the east of the MPLS ring, indicating that a fault occurs on the forward ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.9 | current |
| hwMplsRingEastOamRDIClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamRDI alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.10 | current |
| hwMplsRingWestOamUnexpectedMEG NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.11 | current |
| hwMplsRingWestOamUnexpectedMEGClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamUnexpectedMEG alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.12 | current |
| hwMplsRingEastOamUnexpectedMEG NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.13 | current |
| hwMplsRingEastOamUnexpectedMEGClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamUnexpectedMEG alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.14 | current |
| hwMplsRingWestOamUnexpectedPeriod NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the west MEP of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.15 | current |
| hwMplsRingWestOamUnexpectedPeriodClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamUnexpectedPeriod alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.16 | current |
| hwMplsRingEastOamUnexpectedPeriod NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the east MEP of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.17 | current |
| hwMplsRingEastOamUnexpectedPeriodClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamUnexpectedPeriod alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.18 | current |
| hwMplsRingWestOamExcess NOTIFICATION-TYPE The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.19 | current |
| hwMplsRingWestOamExcessClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamExcess alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.20 | current |
| hwMplsRingEastOamExcess NOTIFICATION-TYPE The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.21 | current |
| hwMplsRingEastOamExcessClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamExcess alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.22 | current |
| hwMplsRingWestOamSD NOTIFICATION-TYPE The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SD threshold. | 1.3.6.1.4.1.2011.5.25.121.7.2.23 | current |
| hwMplsRingWestOamSDClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamSD alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.24 | current |
| hwMplsRingEastOamSD NOTIFICATION-TYPE The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SD threshold. | 1.3.6.1.4.1.2011.5.25.121.7.2.25 | current |
| hwMplsRingEastOamSDClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamSD alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.26 | current |
| hwMplsRingWestOamSF NOTIFICATION-TYPE The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SF threshold. | 1.3.6.1.4.1.2011.5.25.121.7.2.27 | current |
| hwMplsRingWestOamSFClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamSF alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.28 | current |
| hwMplsRingEastOamSF NOTIFICATION-TYPE The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SF threshold. | 1.3.6.1.4.1.2011.5.25.121.7.2.29 | current |
| hwMplsRingEastOamSFClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamSF alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.30 | current |
| hwMplsRingWestAPSSwitch NOTIFICATION-TYPE The notification indicates that APS switching occurs in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.31 | current |
| hwMplsRingWestAPSResume NOTIFICATION-TYPE The notification indicates that APS switches back in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.32 | current |
| hwMplsRingEastAPSSwitch NOTIFICATION-TYPE The notification indicates that APS switching occurs in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.33 | current |
| hwMplsRingEastAPSResume NOTIFICATION-TYPE The notification indicates that APS switches back in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.34 | current |
| hwMplsRingWestAPSSwitchFail NOTIFICATION-TYPE The notification indicates that the remote APS switching fails in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.35 | current |
| hwMplsRingWestAPSSwitchFailClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestAPSSwitchFail alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.36 | current |
| hwMplsRingEastAPSSwitchFail NOTIFICATION-TYPE The notification indicates that the remote APS switching fails in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.37 | current |
| hwMplsRingEastAPSSwitchFailClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastAPSSwitchFail alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.38 | current |
| hwMplsRingWestAPSLost NOTIFICATION-TYPE The notification indicates that APS packets are missing in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.39 | current |
| hwMplsRingWestAPSLostClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestAPSLost alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.40 | current |
| hwMplsRingEastAPSLost NOTIFICATION-TYPE The notification indicates that APS packets are missing in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.41 | current |
| hwMplsRingEastAPSLostClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastAPSLost alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.42 | current |
| hwMplsRingWestAPSMismatch NOTIFICATION-TYPE The notification indicates that the source ID carried by APS packets received in the west is different from the peer source ID configured for the west state machine on the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.43 | current |
| hwMplsRingWestAPSMismatchClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestAPSMismatch alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.44 | current |
| hwMplsRingEastAPSMismatch NOTIFICATION-TYPE The notification indicates that the source ID carried by APS packets received in the east is different from the peer source ID configured for the east state machine on the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.45 | current |
| hwMplsRingEastAPSMismatchClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastAPSMismatch alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.46 | current |
| hwMplsRingWestOamUnexpectedMEP NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the west of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.47 | current |
| hwMplsRingWestOamUnexpectedMEPClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingWestOamUnexpectedMEP alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.48 | current |
| hwMplsRingEastOamUnexpectedMEP NOTIFICATION-TYPE The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the east of the MPLS ring. | 1.3.6.1.4.1.2011.5.25.121.7.2.49 | current |
| hwMplsRingEastOamUnexpectedMEPClear NOTIFICATION-TYPE The notification indicates that the hwMplsRingEastOamUnexpectedMEP alarm was cleared. | 1.3.6.1.4.1.2011.5.25.121.7.2.50 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwMplsTunnelGroup OBJECT-GROUP Indicate the atrributes of the tunnel. | 1.3.6.1.4.1.2011.5.25.121.6.1.1 | current |
| hwStaticLspGroup OBJECT-GROUP Indicate the atrributes of the static lsp. | 1.3.6.1.4.1.2011.5.25.121.6.1.2 | current |
| hwMplsDsTeGroup OBJECT-GROUP Indicate the atrributes about DS-TE. | 1.3.6.1.4.1.2011.5.25.121.6.1.3 | current |
| hwMplsLspStatisticsGroup OBJECT-GROUP Indicate LSP statistics. | 1.3.6.1.4.1.2011.5.25.121.6.1.4 | current |
| hwMplsObsoleteGroup OBJECT-GROUP Indicate the OBSOLETE objects of MPLS. | 1.3.6.1.4.1.2011.5.25.121.6.1.5 | obsolete |
| hwMplsTrapGroup OBJECT-GROUP For mpls trap object. | 1.3.6.1.4.1.2011.5.25.121.6.1.6 | current |
| hwMplsRingGroup OBJECT-GROUP For mpls ring trap object. | 1.3.6.1.4.1.2011.5.25.121.6.1.7 | current |
| hwMplsGlobalGroup OBJECT-GROUP For mpls global object. | 1.3.6.1.4.1.2011.5.25.121.6.1.8 | current |
| hwMplsLspGroup OBJECT-GROUP For mpls lsp object. | 1.3.6.1.4.1.2011.5.25.121.6.1.9 | current |
| hwMplsLspTrafficStatisticGroup OBJECT-GROUP Indicate the traffic statistic of the LSP. | 1.3.6.1.4.1.2011.5.25.121.6.1.10 | current |
| hwMplsResourceGroup OBJECT-GROUP For mpls resource object. | 1.3.6.1.4.1.2011.5.25.121.6.1.11 | current |
| hwExtendTrapGroup NOTIFICATION-GROUP Indicate the traps. | 1.3.6.1.4.1.2011.5.25.121.6.2.1 | current |
| hwObsoleteTrapGroup NOTIFICATION-GROUP Indicate the Obsolete traps. | 1.3.6.1.4.1.2011.5.25.121.6.2.2 | obsolete |
| hwMplsModuleCompliance MODULE-COMPLIANCE hwMplsModuleCompliance | 1.3.6.1.4.1.2011.5.25.121.6.2.3 | current |