HUAWEI-LswMix-MIB
- Registered at
- 1.3.6.1.4.1.2011.2.23.1.17
- Last updated
- 2001-06-29 00:00
- Revisions
- 2001-06-29 00:00
- Namespace
- huawei
- Source file
HUAWEI-LswMix-MIB- Digest
sha256:f42992fbf2a11c3ae1ca2ada207fe8d3b82643724abd68bf988d79d52f45e29b
Imports
| From | Symbols |
|---|---|
| HUAWEI-3COM-OID-MIB | lswCommon |
| HUAWEI-LSW-DEV-ADM-MIB | hwLswFrameIndex, hwLswSlotIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HUAWEI-3COM-OID-MIB HUAWEI-LSW-DEV-ADM-MIB HUAWEI-LswMix-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwLswLastSwitchDate OBJECT-TYPE This object indicates the date of the most recent change to the mpu(Main Processing Unit). | 1.3.6.1.4.1.2011.2.23.1.17.1 | INTEGER | read-only | current |
| hwLswLastSwitchTime OBJECT-TYPE This object indicates the time of the most recent change to the mpu. | 1.3.6.1.4.1.2011.2.23.1.17.2 | INTEGER | read-only | current |
| hwLswMpuSwitchsNum OBJECT-TYPE This object indicates the total times of the mpu switched since the system start up. | 1.3.6.1.4.1.2011.2.23.1.17.3 | INTEGER | read-only | current |
| hwLswMpuSwitch OBJECT-TYPE Setting this object will immediately switch the standby mpu to master mpu. Read is not supported. | 1.3.6.1.4.1.2011.2.23.1.17.4 | INTEGER {switch(1)} | read-write | current |
| hwLswXSlotTable OBJECT-TYPE The source main table. | 1.3.6.1.4.1.2011.2.23.1.17.5 | not-accessible | current | |
| hwLswXSlotEntry OBJECT-TYPE An entry in the source main table. | 1.3.6.1.4.1.2011.2.23.1.17.5.1 | not-accessible | current | |
| hwLswMainCardBoardStatus OBJECT-TYPE The value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit) | 1.3.6.1.4.1.2011.2.23.1.17.5.1.1 | INTEGER {master(1), standby(2), process(3)} | read-only | current |
| hwLswCrossBarStatus OBJECT-TYPE The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode. | 1.3.6.1.4.1.2011.2.23.1.17.5.1.2 | INTEGER {master(1), standby(2)} | read-only | current |
| hwsMixTrapMib OBJECT-IDENTITY | 1.3.6.1.4.1.2011.2.23.1.17.10 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwSlaveSwitchOver NOTIFICATION-TYPE An hwSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. | 1.3.6.1.4.1.2011.2.23.1.17.10.1 | current |