HUAWEI-LswINF-MIB
- Registered at
- 1.3.6.1.4.1.2011.2.23.1.11.3.6.1.4.1.2011.2.23.1.5
- Last updated
- 2001-06-29 00:00
- Revisions
- 2001-06-29 00:00
- Namespace
- huawei
- Source file
HUAWEI-LswINF-MIB- Digest
sha256:deab29f82f8d4ce263b5b76f9d3863eec3bbb84ae9faf5e44354202820e0868e
Imports
| From | Symbols |
|---|---|
| HUAWEI-3COM-OID-MIB | lswCommon |
| IF-MIB | ifEntry, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HUAWEI-3COM-OID-MIB HUAWEI-LswINF-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DropDirection TEXTUAL-CONVENTION Representing the direction of dropping packets, if applicable. | current | |||
| InterfaceIndex TEXTUAL-CONVENTION A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | current | |||
| PortList TEXTUAL-CONVENTION Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | current | |||
| SpeedModeFlag TEXTUAL-CONVENTION Type of Negotiable Speed mode. | current | |||
| VlanIndex TEXTUAL-CONVENTION A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwLswExtInterface OBJECT-IDENTITY | 1.3.6.1.4.1.2011.2.23.1.1 | |||
| hwifXXTable OBJECT-TYPE Extended Huawei private interface information table. | 1.3.6.1.4.1.2011.2.23.1.1.1 | not-accessible | current | |
| hwifXXEntry OBJECT-TYPE Entries of extended Huawei private interface information table. | 1.3.6.1.4.1.2011.2.23.1.1.1.1 | not-accessible | current | |
| hwifUnBoundPort OBJECT-TYPE Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.) | 1.3.6.1.4.1.2011.2.23.1.1.1.1.1 | TruthValue | read-only | current |
| hwifISPhyPort OBJECT-TYPE Whether it is a physical interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.2 | TruthValue | read-only | current |
| hwifAggregatePort OBJECT-TYPE Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.) | 1.3.6.1.4.1.2011.2.23.1.1.1.1.3 | TruthValue | read-only | current |
| hwifMirrorPort OBJECT-TYPE Whether it is a mirror port. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.4 | TruthValue | read-write | current |
| hwifVLANType OBJECT-TYPE port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.5 | INTEGER {vLANTrunk(1), access(2), hybrid(3), fabric(4)} | read-write | current |
| hwifMcastControl OBJECT-TYPE Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.6 | INTEGER (1..100) | read-write | current |
| hwifFlowControl OBJECT-TYPE Flow control status. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.7 | TruthValue | read-write | current |
| hwifSrcMacControl OBJECT-TYPE Whether to filter by source MAC address. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.8 | TruthValue | read-only | current |
| hwifClearStat OBJECT-TYPE Clear all port statistics. Read operation not supported. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.9 | INTEGER {clear(1)} | read-write | current |
| hwifXXBasePortIndex OBJECT-TYPE Index number of the port and the first port index of the device is 1. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.10 | INTEGER | read-only | current |
| hwifXXDevPortIndex OBJECT-TYPE Device index of the port. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.11 | INTEGER | read-only | current |
| hwifPpsMcastControl OBJECT-TYPE The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.12 | Integer32 | read-write | current |
| hwifPpsBcastDisValControl OBJECT-TYPE Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.13 | INTEGER {enable(1), disable(2)} | read-write | current |
| hwifUniSuppressionStep OBJECT-TYPE The step of unicast suppression in ratio mode. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.14 | Integer32 | read-only | current |
| hwifPpsUniSuppressionMax OBJECT-TYPE The max pps(packet per second) value of unicast suppression in pps mode. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.15 | Integer32 | read-only | current |
| hwifMulSuppressionStep OBJECT-TYPE The step of multicast suppression in ratio mode. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.16 | Integer32 | read-only | current |
| hwifPpsMulSuppressionMax OBJECT-TYPE The max pps(packet per second) value of multicast suppression in pps mode. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.17 | Integer32 | read-only | current |
| hwifUniSuppression OBJECT-TYPE The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hwifUniSuppressionStep. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.18 | Integer32 | read-write | current |
| hwifPpsUniSuppression OBJECT-TYPE The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.19 | Integer32 | read-write | current |
| hwifMulSuppression OBJECT-TYPE The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hwifMulSuppressionStep. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.20 | Integer32 | read-write | current |
| hwifPpsMulSuppression OBJECT-TYPE The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.21 | Integer32 | read-write | current |
| hwifComboActivePort OBJECT-TYPE Active port on combo interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.22 | INTEGER {fiber(1), copper(2), na(3)} | read-write | obsolete |
| hwifBMbpsMulSuppressionMax OBJECT-TYPE The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.23 | Integer32 | read-only | current |
| hwifBMbpsMulSuppression OBJECT-TYPE With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hwifBMbpsMulSuppressionMax in the entry. The default value of hwifBMbpsMulSuppression is the value of hwifBMbpsMulSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.24 | Integer32 | read-write | current |
| hwifBKbpsMulSuppressionMax OBJECT-TYPE The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.25 | Integer32 | read-only | current |
| hwifBKbpsMulSuppressionStep OBJECT-TYPE The step of multicast suppression with bandwidth-based(Kbps). | 1.3.6.1.4.1.2011.2.23.1.1.1.1.26 | Integer32 | read-only | current |
| hwifBKbpsMulSuppression OBJECT-TYPE With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hwifBKbpsMulSuppressionMax in the entry. The value of hwifBKbpsMulSuppression must be multiple of the value of hwifBKbpsMulSuppressionStep. The default value of hwifBKbpsMulSuppression is the value of hwifBKbpsMulSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.27 | Integer32 | read-write | current |
| hwifUnknownPacketDropMul OBJECT-TYPE Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.28 | DropDirection | read-write | current |
| hwifUnknownPacketDropUni OBJECT-TYPE Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.29 | DropDirection | read-write | current |
| hwifBMbpsUniSuppressionMax OBJECT-TYPE The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.30 | Integer32 | read-only | current |
| hwifBMbpsUniSuppression OBJECT-TYPE With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hwifBMbpsUniSuppressionMax in the entry. The default value of hwifBMbpsUniSuppression is the value of hwifBMbpsUniSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.31 | Integer32 | read-write | current |
| hwifBKbpsUniSuppressionMax OBJECT-TYPE The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.32 | Integer32 | read-only | current |
| hwifBKbpsUniSuppressionStep OBJECT-TYPE The step of unicast suppression with bandwidth-based(Kbps). | 1.3.6.1.4.1.2011.2.23.1.1.1.1.33 | Integer32 | read-only | current |
| hwifBKbpsUniSuppression OBJECT-TYPE With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hwifBKbpsUniSuppressionMax in the entry. The value of hwifBKbpsUniSuppression must be multiple of the value of hwifBKbpsUniSuppressionStep. The default value of hwifBKbpsUniSuppression is the value of hwifBKbpsUniSuppressionMax. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.34 | Integer32 | read-write | current |
| hwifOutPayloadOctets OBJECT-TYPE The actual output octets of the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.35 | Counter64 | read-only | current |
| hwifInPayloadOctets OBJECT-TYPE The actual input octets of the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.36 | Counter64 | read-only | current |
| hwifInErrorPktsRate OBJECT-TYPE The rate of inbound error packets on the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.37 | Integer32 | read-only | current |
| hwifInPkts OBJECT-TYPE The number of packets received on the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.38 | Counter64 | read-only | current |
| hwifInNormalPkts OBJECT-TYPE The number of normal packets received on the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.39 | Counter64 | read-only | current |
| hwifOutPkts OBJECT-TYPE The number of packets sent on the interface. | 1.3.6.1.4.1.2011.2.23.1.1.1.1.40 | Counter64 | read-only | current |
| hwifAggregateTable OBJECT-TYPE Port aggregation information table. | 1.3.6.1.4.1.2011.2.23.1.1.2 | not-accessible | current | |
| hwifAggregateEntry OBJECT-TYPE Port aggregation information table. | 1.3.6.1.4.1.2011.2.23.1.1.2.1 | not-accessible | current | |
| hwifAggregatePortIndex OBJECT-TYPE Index number of the main aggregated port. | 1.3.6.1.4.1.2011.2.23.1.1.2.1.1 | InterfaceIndex | read-only | current |
| hwifAggregatePortName OBJECT-TYPE Aggregation group name. | 1.3.6.1.4.1.2011.2.23.1.1.2.1.2 | OCTET STRING (SIZE(0..40)) | read-write | current |
| hwifAggregatePortListPorts OBJECT-TYPE Portlist of a aggregating. | 1.3.6.1.4.1.2011.2.23.1.1.2.1.3 | PortList | read-write | current |
| hwifAggregateModel OBJECT-TYPE Load sharing mode for the port aggregation. | 1.3.6.1.4.1.2011.2.23.1.1.2.1.4 | INTEGER {ingress(1), both(2), round-robin(3)} | read-write | current |
| hwifAggregateOperStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.2.23.1.1.2.1.5 | RowStatus | read-create | current |
| hwifHybridPortTable OBJECT-TYPE Hybrid-port configuration table. | 1.3.6.1.4.1.2011.2.23.1.1.3 | not-accessible | current | |
| hwifHybridPortEntry OBJECT-TYPE Hybrid-port configuration table. | 1.3.6.1.4.1.2011.2.23.1.1.3.1 | not-accessible | current | |
| hwifHybridPortIndex OBJECT-TYPE Index number of Hybrid-port. | 1.3.6.1.4.1.2011.2.23.1.1.3.1.1 | INTEGER | read-only | current |
| hwifHybridTaggedVlanListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.1.3.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifHybridTaggedVlanListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.1.3.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifHybridUnTaggedVlanListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.1.3.1.4 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifHybridUnTaggedVlanListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.1.3.1.5 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hwifComboPortTable OBJECT-TYPE Combo-port table. | 1.3.6.1.4.1.2011.2.23.1.1.4 | not-accessible | current | |
| hwifComboPortEntry OBJECT-TYPE The entry of hwifComboPortTable. | 1.3.6.1.4.1.2011.2.23.1.1.4.1 | not-accessible | current | |
| hwifComboPortIndex OBJECT-TYPE The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces. | 1.3.6.1.4.1.2011.2.23.1.1.4.1.1 | InterfaceIndex | read-only | current |
| hwifComboPortCurActive OBJECT-TYPE Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported. | 1.3.6.1.4.1.2011.2.23.1.1.4.1.2 | INTEGER {fiber(1), copper(2), na(3)} | read-write | current |
| hwLswL2InfMibObject OBJECT-IDENTITY | 1.3.6.1.4.1.2011.2.23.1.5.1 | |||
| hwSlotPortMax OBJECT-TYPE Max ports of the slots. | 1.3.6.1.4.1.2011.2.23.1.5.1.1 | INTEGER | read-only | current |
| hwSwitchPortMax OBJECT-TYPE Max ports that this switch includes. | 1.3.6.1.4.1.2011.2.23.1.5.1.2 | INTEGER | read-only | current |
| hwifVLANTrunkStatusTable OBJECT-TYPE Gvrp attributes on the VlanTrunk port. | 1.3.6.1.4.1.2011.2.23.1.5.1.3 | not-accessible | current | |
| hwifVLANTrunkStatusEntry OBJECT-TYPE Gvrp attributes on the VlanTrunk port. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1 | not-accessible | current | |
| hwifVLANTrunkIndex OBJECT-TYPE Index number of the VLANTrunk interface. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.1 | InterfaceIndex | read-only | current |
| hwifVLANTrunkGvrpRegistration OBJECT-TYPE GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.2 | INTEGER {normal(1), fixed(2), forbidden(3)} | read-write | current |
| hwifVLANTrunkPassListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.4 | OCTET STRING | read-only | current |
| hwifVLANTrunkPassListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.5 | OCTET STRING | read-only | current |
| hwifVLANTrunkAllowListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.6 | OCTET STRING | read-write | current |
| hwifVLANTrunkAllowListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.7 | OCTET STRING | read-write | current |
| hwethernetTable OBJECT-TYPE Ethernet port attribute table. | 1.3.6.1.4.1.2011.2.23.1.5.1.4 | not-accessible | current | |
| hwethernetEntry OBJECT-TYPE Entries of Ethernet port attribute table | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1 | not-accessible | current | |
| hwifEthernetDuplex OBJECT-TYPE Ethernet interface mode. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3 | INTEGER {full(1), half(2), auto(3)} | read-write | current |
| hwifEthernetMTU OBJECT-TYPE MTU on the Ethernet interface. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4 | INTEGER | read-write | current |
| hwifEthernetSpeed OBJECT-TYPE Ethernet interface speed. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5 | INTEGER {auto(0), s10M(10), s100M(100), s1000M(1000), s10000M(10000), s24000M(24000), s40000M(40000), s100000M(100000)} | read-write | current |
| hwifEthernetMdi OBJECT-TYPE Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3 | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7 | INTEGER {mdi-ii(1), mdi-x(2), mdi-auto(3)} | read-write | current |
| hwMaxMacLearn OBJECT-TYPE The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8 | INTEGER (-1..2147483647) | read-write | current |
| hwifMacAddressLearn OBJECT-TYPE This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| hwifEthernetTest OBJECT-TYPE Test this interface. The actual testing will be different according to products. Read operation not supported. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10 | INTEGER {test(1)} | read-write | current |
| hwifMacAddrLearnMode OBJECT-TYPE Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11 | INTEGER {iVL(1), sVL(2)} | read-only | current |
| hwifEthernetFlowInterval OBJECT-TYPE Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12 | INTEGER (5..300) | read-write | current |
| hwifEthernetIsolate OBJECT-TYPE Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13 | OCTET STRING | read-write | current |
| hwifVlanVPNStatus OBJECT-TYPE Vlan VPN enable status. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hwifVlanVPNUplinkStatus OBJECT-TYPE Vlan VPN uplink status. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hwifVlanVPNTPID OBJECT-TYPE Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16 | Integer32 (1..65535) | read-write | current |
| hwifIsolateGroupID OBJECT-TYPE Isolate group identifier. Value zero means this interface does not belong to any isolate group. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17 | Integer32 | read-write | current |
| hwifisUplinkPort OBJECT-TYPE Ethernet uplink status, default value is 2. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18 | INTEGER {yes(1), no(2)} | read-only | current |
| hwifEthernetAutoSpeedMask OBJECT-TYPE This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.19 | SpeedModeFlag | read-only | current |
| hwifEthernetAutoSpeed OBJECT-TYPE This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hwifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hwifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hwifEthernetAutoSpeedMask. | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.20 | SpeedModeFlag | read-write | current |
| hwIsolateGroupMax OBJECT-TYPE Max isolate group that this device support, the value is zero means that the device does not support isolate group. | 1.3.6.1.4.1.2011.2.23.1.5.1.5 | Integer32 | read-only | current |
| hwGlobalBroadcastMaxPps OBJECT-TYPE The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting. | 1.3.6.1.4.1.2011.2.23.1.5.1.6 | INTEGER (0..14881000) | read-write | current |
| hwGlobalBroadcastMaxRatio OBJECT-TYPE The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting. | 1.3.6.1.4.1.2011.2.23.1.5.1.7 | INTEGER (0..100) | read-write | current |
| hwBpduTunnelStatus OBJECT-TYPE Bpdu tunnel enable status. | 1.3.6.1.4.1.2011.2.23.1.5.1.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hwVlanVPNTPIDMode OBJECT-TYPE Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hwVlanVPNTPID. In this situation, hwifVlanVPNTPID in hwethernetTable has the same value with hwVlanVPNTPID. | 1.3.6.1.4.1.2011.2.23.1.5.1.9 | INTEGER {port-based(1), global(2)} | read-only | current |
| hwVlanVPNTPID OBJECT-TYPE Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. | 1.3.6.1.4.1.2011.2.23.1.5.1.10 | Integer32 (1..65535) | read-write | current |
| hwPortIsolateGroupTable OBJECT-TYPE Isolate Group attribute table. | 1.3.6.1.4.1.2011.2.23.1.5.1.11 | not-accessible | current | |
| hwPortIsolateGroupEntry OBJECT-TYPE The entry of hwPortIsolateGroupTable. | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1 | not-accessible | current | |
| hwPortIsolateGroupIndex OBJECT-TYPE Port isolate group identifier. The index of the hwPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.1 | Integer32 | not-accessible | current |
| hwPortIsolateUplinkIfIndex OBJECT-TYPE Index number of the uplink interface. | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.2 | InterfaceIndex | read-create | current |
| hwPortIsolateGroupRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.3 | RowStatus | read-create | current |
| hwPortIsolateGroupDescription OBJECT-TYPE Port isolate group description, default value is zero-length string. | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.4 | DisplayString (SIZE(0..80)) | read-create | current |
| hwMaxMacLearnRange OBJECT-TYPE The maximum number of MAC address that the port supports. | 1.3.6.1.4.1.2011.2.23.1.5.1.12 | Integer32 | read-only | current |