HUAWEI-LI-MIB
- Registered at
- 1.3.6.1.4.1.2011.5.25.131
- Last updated
- 2007-06-27 00:00
- Organization
- hw Technologies co.,Ltd.
- Revisions
- 2007-06-27 00:00
- Namespace
- huawei
- Source file
HUAWEI-LI-MIB- Digest
sha256:156db733eecd832eb491b4a2289a676ff8fe5c45a5b28b3fc03cdc053254dc50
Description
This module manages huawei's Lawful interception feature.
Contact
R&D Meaning, huawei Technologies co.,Ltd. Http://www.huawei.com E-mail:support@huawei.com
Imports
| From | Symbols |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HUAWEI-LI-MIB HUAWEI-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HWLiDscp TEXTUAL-CONVENTION An integer that is in the range of the DiffServ codepoint values. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hwLiMibNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.1 | |||
| hwLiMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.2 | |||
| hwLiAgentObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.2.1 | |||
| hwLiAgentTime OBJECT-TYPE The time of the LI agent.Read-only. | 1.3.6.1.4.1.2011.5.25.131.2.1.1 | DateAndTime | read-only | current |
| hwLiAgentEnable OBJECT-TYPE The status of the LI agent.Read-only. | 1.3.6.1.4.1.2011.5.25.131.2.1.2 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| hwLiAgentX2IpAddress OBJECT-TYPE The IP address of the X2 interface in LI agent.Just can be read by server and can be set in command line. | 1.3.6.1.4.1.2011.5.25.131.2.1.3 | InetAddress | read-only | current |
| hwLiAgentX2Port OBJECT-TYPE The Port of the X2 interface in LI agent.Just can be read by server and can be set in command line. | 1.3.6.1.4.1.2011.5.25.131.2.1.4 | InetPortNumber | read-only | current |
| hwLiAgentX3IpAddress OBJECT-TYPE The IP address of the X3 interface in LI agent.Just can be read by server and can be set in command line. | 1.3.6.1.4.1.2011.5.25.131.2.1.5 | InetAddress | read-only | current |
| hwLiAgentX3Port OBJECT-TYPE The Port of the X3 interface in LI agent.Just can be read by server and can be set in command line. | 1.3.6.1.4.1.2011.5.25.131.2.1.6 | InetPortNumber | read-only | current |
| hwLiGatewayGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.2.3 | |||
| hwLiGatewayNewIndex OBJECT-TYPE This object contains a value which may be used as an index value for a new HwLiGatewayEntry. This is to reduce the probability of errors during creation of new hwLiGatewayTable entries.0 means no free resource. | 1.3.6.1.4.1.2011.5.25.131.2.3.1 | Integer32 (0 | 1..10) | read-only | current |
| hwLiGatewayTable OBJECT-TYPE This table lists the LI Gateway Devices with which the intercepting device communicates. This table is written by the LI Gateway Device, and is always volatile. This is because intercepts may disappear during a restart of the intercepting equipment. Entries are added to this table via hwLiGatewayStatus in accordance with the RowStatus convention. | 1.3.6.1.4.1.2011.5.25.131.2.3.2 | not-accessible | current | |
| hwLiGatewayEntry OBJECT-TYPE The entry describes a single session maintained with an application on a LI Gateway Device. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1 | not-accessible | current | |
| hwLiGatewayIndex OBJECT-TYPE The index of the LIG itself. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.1 | Integer32 (1..10) | not-accessible | current |
| hwLiGatewayAddressType OBJECT-TYPE The type of address in LIG | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.2 | InetAddressType | read-create | current |
| hwLiGatewayX2Protocol OBJECT-TYPE The protocol used in transferring intercepted data to the Gateway Device. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.3 | INTEGER {udp(1), tcp(2)} | read-create | current |
| hwLiGatewayX2Address OBJECT-TYPE The IP Address of the Gateway Device's network interface to which to direct IRI. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.4 | InetAddress | read-create | current |
| hwLiGatewayX2Port OBJECT-TYPE The port number on the Gateway Device's network interface to which to direct IRI. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.5 | InetPortNumber | read-create | current |
| hwLiGatewayX3Protocol OBJECT-TYPE The protocol used in transferring intercepted data to the Gateway Device. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.6 | INTEGER {udp(1), tcp(2)} | read-create | current |
| hwLiGatewayX3Address OBJECT-TYPE The IP Address of the Gateway Device's network interface to which to direct CC. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.7 | InetAddress | read-create | current |
| hwLiGatewayX3Port OBJECT-TYPE The port number on the Gateway Device's network interface to which to direct intercepted traffic. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.8 | InetPortNumber | read-create | current |
| hwLiGatewayX3HeartBeatTimer OBJECT-TYPE The timer for sending HeartBeat to LIG,In seconds | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.9 | Integer32 (0..255) | read-create | current |
| hwLiGatewayX3NoResponseNum OBJECT-TYPE The times of heartbeats that allowed to missed from LIG | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.10 | Integer32 (2..16) | read-create | current |
| hwLiGatewayX3OperateStatus OBJECT-TYPE The operate status of X3 interface | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.11 | INTEGER {normal(1), noHeartBeat(2), linkdown(3)} | read-only | current |
| hwLiGatewayX3Dscp OBJECT-TYPE The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.12 | HWLiDscp | read-create | current |
| hwLiGatewayRowStatus OBJECT-TYPE The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.14 | RowStatus | read-create | current |
| hwLiGatewayX3AddressType OBJECT-TYPE The type of address in LIG | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.15 | InetAddressType | read-create | current |
| hwLiGatewayX2AddressType OBJECT-TYPE The type of address in LIG | 1.3.6.1.4.1.2011.5.25.131.2.3.2.1.16 | InetAddressType | read-create | current |
| hwLiGatewayCapabilities OBJECT-TYPE This object displays the device capabilities with respect to certain fields in Gateway Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipv4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by hwLiGatewaySrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Gateway Device. ipv6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by hwLiGatewaySrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Gateway Device. udp: UDP may be used as transport protocol (denoted by hwLiGatewayTransport) in transferring intercepted data to the Gateway Device. tcp: TCP may be used as transport protocol (denoted by hwLiGatewayTransport) in transferring intercepted data to the Gateway Device. | 1.3.6.1.4.1.2011.5.25.131.2.3.3 | Bits {ipv4SrcInterface(0), ipv6SrcInterface(1), udp(2), tcp(3)} | read-only | current |
| hwLiStreamGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.2.4 | |||
| hwLiStreamTable OBJECT-TYPE The Intercept Stream Table lists the IPv4 and IPv6 streams to be intercepted. The same data stream must be used by one LIG. The first index indicates which LIG the intercepted traffic will be diverted to. The second index permits multiple classifiers to be used together, such as having an IP address as source or destination. | 1.3.6.1.4.1.2011.5.25.131.2.4.2 | not-accessible | current | |
| hwLiStreamEntry OBJECT-TYPE A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and many application interfaces are supported. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1 | not-accessible | current | |
| hwLiStreamIndex OBJECT-TYPE The index of the stream itself. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.1 | Integer32 (1..8192) | not-accessible | current |
| hwLiStreamLiId OBJECT-TYPE The ID indicate a independency stream in a LIG . | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.2 | Unsigned32 | read-create | current |
| hwLiStreamActivationType OBJECT-TYPE Intercepted IRI or CC or BOTH. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.3 | INTEGER {iri(1), cc(2), both(3)} | read-create | current |
| hwLiStreamSessionId OBJECT-TYPE The index of the stream itself.0 means no session ID will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.4 | Integer32 (0..2147483647) | read-create | current |
| hwLiStreamTargetIdType OBJECT-TYPE Target ID type specifies the type of packets. 1 means one direction traffic is intercept, 2 means bidirectional traffic is intercept. for bidirectional interception, if the source IP or destination IP in a packet is equal with the configured hwLiStreamSrcIpAddress, If other condition is satisfied then the packet is intercepted. for one-directional interception, if the sourceIP and DestinationIP in a packet is equal with the configured hwLiStreamSrcIpAddress and hwLiStreamDstIPAddress,If other condition is satisfied then the packet is intercepted | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.5 | INTEGER {oneDirection(1), biDirection(2)} | read-create | current |
| hwLiStreamSrcMacAddress OBJECT-TYPE Source Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.7 | MacAddress | read-create | current |
| hwLiStreamDstMacAddress OBJECT-TYPE Destination Mac address of the packets which will be intercepted. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.8 | MacAddress | read-create | current |
| hwLiStreamSrcIpAddress OBJECT-TYPE The Source Address used in packet selection. This address will be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.9 | InetAddress | read-create | current |
| hwLiStreamSrcIpLength OBJECT-TYPE The length of the Source Prefix. A value of 32 causes all addresses to match. This prefix length will be consistent with the type specified in hwLiStreamIpAddrType. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.10 | InetAddressPrefixLength | read-create | current |
| hwLiStreamDstIpAddress OBJECT-TYPE The Destination address or prefix used in packet selection. This address will be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.11 | InetAddress | read-create | current |
| hwLiStreamDstIpLength OBJECT-TYPE The length of the Destination Prefix. A value of 32 causes all addresses to match. This prefix length will be consistent with the type specified in hwLiStreamIpAddrType. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.12 | InetAddressPrefixLength | read-create | current |
| hwLiStreamProtocol OBJECT-TYPE Protocol type of the packets which will be intercepted.0 means no Protocol type will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.13 | Integer32 (0..255) | read-create | current |
| hwLiStreamSrcPort OBJECT-TYPE The fourth layer source port.0 means no Port will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.14 | InetPortNumber | read-create | current |
| hwLiStreamDstPort OBJECT-TYPE The fourth layer Destination port.0 means no Port will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.15 | InetPortNumber | read-create | current |
| hwLiStreamIfIndex OBJECT-TYPE The interface switch carrying the intercepted taffic.0 means no interface will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.16 | Integer32 (0..2147483647) | read-create | current |
| hwLiStreamUserName OBJECT-TYPE The username whose traffic will be intercepted.zero-length means no user will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.17 | OCTET STRING | read-create | current |
| hwLiStreamRowStatus OBJECT-TYPE The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.18 | RowStatus | read-create | current |
| hwLiStreamSrcIpAddressType OBJECT-TYPE The source IP address of the interception stream | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.19 | InetAddressType | read-create | current |
| hwLiStreamDstIpAddressType OBJECT-TYPE The destination IP address of the interception stream | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.20 | InetAddressType | read-create | current |
| hwLiStreamSrcVpnName OBJECT-TYPE The source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.21 | OCTET STRING | read-create | current |
| hwLiStreamDstVpnName OBJECT-TYPE The destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.22 | OCTET STRING | read-create | current |
| hwLiStreamL2tpIfIndex OBJECT-TYPE The L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.23 | Integer32 (0..2147483647) | read-create | current |
| hwLiStreamL2tpVlanId OBJECT-TYPE The L2TP VLAN ID of intercepting stream.0 means no Vlan will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.24 | Integer32 (0..2147483647) | read-create | current |
| hwLiStreamAcctSessionId OBJECT-TYPE The accounting session ID of intercepting stream.zero-length means no accouting session ID will be specified | 1.3.6.1.4.1.2011.5.25.131.2.4.2.1.25 | OCTET STRING | read-create | current |
| hwLiMibConform OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.3 | |||
| hwLiMibCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.3.2 | |||
| hwLiMibGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.5.25.131.3.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| hwLiMibActive NOTIFICATION-TYPE This notification is sent when an intercepting router or switch is first capable of intercepting a packet corresponding to a configured data stream. | 1.3.6.1.4.1.2011.5.25.131.1.1 | current |
| hwLiX3HeartBeatAlarm NOTIFICATION-TYPE This notification is sent when an LIG is lost connection to the device which intercepting packet corresponding to a configured data stream. | 1.3.6.1.4.1.2011.5.25.131.1.2 | current |
| hwLiX3HeartBeatRecover NOTIFICATION-TYPE This notification is sent when an LIG is recover connection to the device which intercepting packet corresponding to a configured data stream. | 1.3.6.1.4.1.2011.5.25.131.1.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hwLiMibCompliance MODULE-COMPLIANCE Description. | 1.3.6.1.4.1.2011.5.25.131.3.2.1 | current |
| hwLiAgentComplianceGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.2011.5.25.131.3.3.1 | current |
| hwLiGatewayComplianceGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.2011.5.25.131.3.3.2 | current |
| hwLiStreamComplianceGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.2011.5.25.131.3.3.3 | current |
| hwLiNotificationGroup NOTIFICATION-GROUP Description. | 1.3.6.1.4.1.2011.5.25.131.3.3.4 | current |
| hwLiGatewayCpbComplianceGroup OBJECT-GROUP Description. | 1.3.6.1.4.1.2011.5.25.131.3.3.5 | current |