MIBs Depot

HUAWEI-ERPS-MIB

Registered at
1.3.6.1.4.1.2011.5.25.256
Last updated
2016-10-28 00:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2016-10-28 00:00, 2013-08-31 00:00, 2013-06-28 00:01
Namespace
huawei
Source file
HUAWEI-ERPS-MIB
Digest
sha256:97173bffd0310739da3652c7fc005d3d5d01e4f8a57a3744fbaa6a8f445ca1d3

Description

The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex, ifName
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBVlanId
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-ERPS-MIB
HUAWEI-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
hwErpsObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.256.1
hwErpsGlobalResetRapsPktCnt
OBJECT-TYPE
Reset the RAPS packets counter of all running ERPS ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set.
1.3.6.1.4.1.2011.5.25.256.1.1INTEGER {clear(1), unused(65535)}read-writecurrent
hwErpsRingConfigTable
OBJECT-TYPE
The table includes the configurtion of ERPS rings.
1.3.6.1.4.1.2011.5.25.256.1.2not-accessiblecurrent
hwErpsRingConfigEntry
OBJECT-TYPE
The table includes the configurtion of ERPS rings. The index of the table is ERPS ring id.
1.3.6.1.4.1.2011.5.25.256.1.2.1not-accessiblecurrent
hwConfigRingId
OBJECT-TYPE
ERPS ring Identifier.
1.3.6.1.4.1.2011.5.25.256.1.2.1.1Integer32 (1..255)accessible-for-notifycurrent
hwConfigRingRowStatus
OBJECT-TYPE
Operation of CreateAndGo can be used to create a new ERPS ring, and operation of Destroy be used to destroy an existent ERPS ring.
1.3.6.1.4.1.2011.5.25.256.1.2.1.2RowStatusread-createcurrent
hwConfigDescription
OBJECT-TYPE
A textual description of the ERPS ring. It is mandatory that this only contain no more than 80 printable ASCII characters.
1.3.6.1.4.1.2011.5.25.256.1.2.1.3DisplayString (SIZE(0..80))read-createcurrent
hwConfigControlVlanId
OBJECT-TYPE
The control VLAN identifier of the ERPS ring. If the value of the object is set 0, the operation is to delete configuration.
1.3.6.1.4.1.2011.5.25.256.1.2.1.4Integer32 (0 | 1..4094)read-createcurrent
hwConfigProtectedInstanceList
OBJECT-TYPE
The protected instance list of the ERPS ring.
1.3.6.1.4.1.2011.5.25.256.1.2.1.5OCTET STRING (SIZE(0..512))read-createcurrent
hwConfigWtrTimerSettingValue
OBJECT-TYPE
The setting value of the ring's wait to restore timer.
1.3.6.1.4.1.2011.5.25.256.1.2.1.6Integer32 (1..12)read-createcurrent
hwConfigGuardTimerSettingValue
OBJECT-TYPE
The setting value of the ring's guard timer.
1.3.6.1.4.1.2011.5.25.256.1.2.1.7Integer32 (1..200)read-createcurrent
hwConfigHoldoffTimerSettingValue
OBJECT-TYPE
The setting value of the ring's hold-off timer.
1.3.6.1.4.1.2011.5.25.256.1.2.1.8Integer32 (0..100)read-createcurrent
hwConfigResetRapsPktCnt
OBJECT-TYPE
Reset the RAPS packets counter of the ERPS ring's ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set.
1.3.6.1.4.1.2011.5.25.256.1.2.1.9INTEGER {clear(1), unused(65535)}read-createcurrent
hwConfigRapsMel
OBJECT-TYPE
The MEL is the maintenance entity group(MEG) level providing a communication channel for the ring RAPS information.
1.3.6.1.4.1.2011.5.25.256.1.2.1.10Integer32 (0..7)read-createcurrent
hwConfigVersion
OBJECT-TYPE
Set protocol version of the ERPS ring. The default version is v1.
1.3.6.1.4.1.2011.5.25.256.1.2.1.11INTEGER {v1(1), v2(2)}read-createcurrent
hwConfigRevertiveMode
OBJECT-TYPE
Set revertive mode of the ERPS ring. The default mode is revertive.
1.3.6.1.4.1.2011.5.25.256.1.2.1.12INTEGER {revertive(1), nonRevertive(2)}read-createcurrent
hwConfigRingRole
OBJECT-TYPE
Specify the ERPS ring as sub-ring.
1.3.6.1.4.1.2011.5.25.256.1.2.1.13INTEGER {majorRing(1), subRing(2)}read-createcurrent
hwConfigRapsChannelMode
OBJECT-TYPE
Set RAPS channel of the sub-ring. By default, non-virtual channel is used. unused(65535) is displayed when it is read if the ring is major ring.
1.3.6.1.4.1.2011.5.25.256.1.2.1.14INTEGER {virtualChannel(1), nonVirtualChannel(2), unused(65535)}read-createcurrent
hwConfigTcNotifyErpsRing
OBJECT-TYPE
Set the list of ERPS rings that will be notified when topology changes.
1.3.6.1.4.1.2011.5.25.256.1.2.1.15OCTET STRING (SIZE(0..32))read-createcurrent
hwConfigTcProtectionInterval
OBJECT-TYPE
Time interval for topology change protection, in seconds. The default value is 2.
1.3.6.1.4.1.2011.5.25.256.1.2.1.16Integer32 (1..600)read-createcurrent
hwConfigTcProtectionThreshold
OBJECT-TYPE
Threshold of topology change protection. The default value is 3.
1.3.6.1.4.1.2011.5.25.256.1.2.1.17Integer32 (1..255)read-createcurrent
hwConfigProtectionSwitch
OBJECT-TYPE
Cancel current configuration of the ERPS ring. The value is idle(65535) when it is read, and is clear(1) when the current configuration is canceled.
1.3.6.1.4.1.2011.5.25.256.1.2.1.18INTEGER {clear(1), idle(65535)}read-createcurrent
hwErpsRingStatusTable
OBJECT-TYPE
The table includes the status of ERPS rings.
1.3.6.1.4.1.2011.5.25.256.1.3not-accessiblecurrent
hwErpsRingStatusEntry
OBJECT-TYPE
The table includes the status of ERPS rings. The index of the table is ERPS ring id.
1.3.6.1.4.1.2011.5.25.256.1.3.1not-accessiblecurrent
hwStatusWtrTimerRunningValue
OBJECT-TYPE
The running value of the ring's wait to restore timer.
1.3.6.1.4.1.2011.5.25.256.1.3.1.1Integer32 (0..720)read-onlycurrent
hwStatusGuardTimerRunningValue
OBJECT-TYPE
The running value of the ring's guard timer.
1.3.6.1.4.1.2011.5.25.256.1.3.1.2Integer32 (0..200)read-onlycurrent
hwStatusHoldoffTimerRunningValue
OBJECT-TYPE
The running value of the ring's hold-off timer.
1.3.6.1.4.1.2011.5.25.256.1.3.1.3Integer32 (0..100)read-onlycurrent
hwStatusMachineState
OBJECT-TYPE
The Finite-state machine's state of the ERPS ring. state value idle 1 protection 2 manualSwitch 3 forcedSwitch 4 pending 5
1.3.6.1.4.1.2011.5.25.256.1.3.1.4INTEGER {idle(1), protection(2), manualSwitch(3), forcedSwitch(4), pending(5)}read-onlycurrent
hwStatusTopoLastChangeTime
OBJECT-TYPE
The time since last topology change of the ring.
1.3.6.1.4.1.2011.5.25.256.1.3.1.5TimeTicksread-onlycurrent
hwStatusWtbTimerRunningValue
OBJECT-TYPE
The running value of the ring's wait to block timer.
1.3.6.1.4.1.2011.5.25.256.1.3.1.6Integer32 (0..700)read-onlycurrent
hwErpsPortConfigTable
OBJECT-TYPE
The table includes the configuration of ERPS ports.
1.3.6.1.4.1.2011.5.25.256.1.4not-accessiblecurrent
hwErpsPortConfigEntry
OBJECT-TYPE
The table includes the configuration of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.4.1not-accessiblecurrent
hwConfigPortType
OBJECT-TYPE
The port type.Currently ERPS just supports ethernet port and the value is 1.
1.3.6.1.4.1.2011.5.25.256.1.4.1.1Unsigned32 (1)not-accessiblecurrent
hwConfigPortId1
OBJECT-TYPE
The port identifier1, when the hwConfigPortType is 1, the value of the object is the IfIndex of the port.
1.3.6.1.4.1.2011.5.25.256.1.4.1.2Unsigned32 (0..2147483647)not-accessiblecurrent
hwConfigPortId2
OBJECT-TYPE
The port identifier2, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.4.1.3Unsigned32 (0..2147483647)not-accessiblecurrent
hwConfigPortId3
OBJECT-TYPE
The port identifier3, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.4.1.4Unsigned32 (0..2147483647)not-accessiblecurrent
hwConfigPortId4
OBJECT-TYPE
The port identifier4, Currently it is not used and only for extension, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.4.1.5Unsigned32 (0..2147483647)not-accessiblecurrent
hwConfigPortRowStatus
OBJECT-TYPE
Operation of CreateAndGo can be used to have a port join the ERPS ring. and operation of Destroy be used to have a port leave the ERPS ring.
1.3.6.1.4.1.2011.5.25.256.1.4.1.6RowStatusread-createcurrent
hwConfigPortConfigRole
OBJECT-TYPE
The configued port role: role value common 0x10 rplOwner 0x21 rplNeighbour 0x22
1.3.6.1.4.1.2011.5.25.256.1.4.1.7Integer32read-createcurrent
hwConfigPortProtectionSwitch
OBJECT-TYPE
Set the protection switch mode, including forced switch and manual switch. If no mode is set, idle(65535) is displayed.
1.3.6.1.4.1.2011.5.25.256.1.4.1.8INTEGER {forcedSwitch(1), manualSwitch(2), idle(65535)}read-createcurrent
hwErpsPortStatusTable
OBJECT-TYPE
The table includes the status of ERPS ports.
1.3.6.1.4.1.2011.5.25.256.1.5not-accessiblecurrent
hwErpsPortStatusEntry
OBJECT-TYPE
The table includes the status of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.5.1not-accessiblecurrent
hwPortStatusActiveRole
OBJECT-TYPE
The active port role: role value common 0x10 rplOwner 0x21 rplNeighbour 0x22
1.3.6.1.4.1.2011.5.25.256.1.5.1.1Integer32read-onlycurrent
hwPortStatusSignalStatus
OBJECT-TYPE
The signal status of the port: state value failed 1 nonFailed 2
1.3.6.1.4.1.2011.5.25.256.1.5.1.2INTEGER {failed(1), nonFailed(2)}read-onlycurrent
hwPortStatusFwdStatus
OBJECT-TYPE
The forwarding status of the port: state value discarding 1 forwarding 2
1.3.6.1.4.1.2011.5.25.256.1.5.1.3INTEGER {discarding(1), forwarding(2)}read-onlycurrent
hwErpsPortStatisticsTable
OBJECT-TYPE
The table includes the statistics of ERPS ports.
1.3.6.1.4.1.2011.5.25.256.1.6not-accessiblecurrent
hwErpsPortStatisticsEntry
OBJECT-TYPE
The table includes the Statistics of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.6.1not-accessiblecurrent
hwRxRapsSfPktCnt
OBJECT-TYPE
The number of received RAPS SF packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.1Counter32read-onlycurrent
hwTxRapsSfPktCnt
OBJECT-TYPE
The number of transmitted RAPS SF packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.2Counter32read-onlycurrent
hwRxRapsNrPktCnt
OBJECT-TYPE
The number of received RAPS NR packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.3Counter32read-onlycurrent
hwTxRapsNrPktCnt
OBJECT-TYPE
The number of transmitted RAPS NR packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.4Counter32read-onlycurrent
hwRxRapsNrRbPktCnt
OBJECT-TYPE
The number of received RAPS NRRB packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.5Counter32read-onlycurrent
hwTxRapsNrRbPktCnt
OBJECT-TYPE
The number of transmitted RAPS NRRB packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.6Counter32read-onlycurrent
hwRxRapsFsPktCnt
OBJECT-TYPE
The number of received RAPS FS packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.7Counter32read-onlycurrent
hwTxRapsFsPktCnt
OBJECT-TYPE
The number of transmitted RAPS FS packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.8Counter32read-onlycurrent
hwRxRapsMsPktCnt
OBJECT-TYPE
The number of received RAPS MS packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.9Counter32read-onlycurrent
hwTxRapsMsPktCnt
OBJECT-TYPE
The number of transmitted RAPS MS packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.10Counter32read-onlycurrent
hwRxRapsEventPktCnt
OBJECT-TYPE
The number of received RAPS Event packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.11Counter32read-onlycurrent
hwTxRapsEventPktCnt
OBJECT-TYPE
The number of transmitted RAPS Event packets.
1.3.6.1.4.1.2011.5.25.256.1.6.1.12Counter32read-onlycurrent
hwErpsPortTrackTable
OBJECT-TYPE
The table includes the information of ERPS ports track.
1.3.6.1.4.1.2011.5.25.256.1.7not-accessiblecurrent
hwErpsPortTrackEntry
OBJECT-TYPE
The table includes the information of ERPS ports track. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4, protocol type. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0.
1.3.6.1.4.1.2011.5.25.256.1.7.1not-accessiblecurrent
hwErpsPortTrackProtocolType
OBJECT-TYPE
The protocol type that ERPS port tracks. Currently ERPS port just supports tracking CFM.
1.3.6.1.4.1.2011.5.25.256.1.7.1.1INTEGER {cfm(1)}accessible-for-notifycurrent
hwErpsPortTrackRowStatus
OBJECT-TYPE
The CreateAndGo operation enables an ERPS port to track the protocol. The Destroy operation disables an ERPS port from tracking the protocol.
1.3.6.1.4.1.2011.5.25.256.1.7.1.2RowStatusread-createcurrent
hwErpsPortTrackCfmMdName
OBJECT-TYPE
The name of maintenance domain.
1.3.6.1.4.1.2011.5.25.256.1.7.1.3OCTET STRING (SIZE(1..43))read-createcurrent
hwErpsPortTrackCfmMaName
OBJECT-TYPE
The name of maintenance association.
1.3.6.1.4.1.2011.5.25.256.1.7.1.4OCTET STRING (SIZE(1..43))read-createcurrent
hwErpsPortTrackCfmMepId
OBJECT-TYPE
MEP ID.
1.3.6.1.4.1.2011.5.25.256.1.7.1.5Integer32 (1..8191)read-createcurrent
hwErpsPortTrackCfmRmepId
OBJECT-TYPE
Remote MEP ID.
1.3.6.1.4.1.2011.5.25.256.1.7.1.6Integer32 (1..8191)read-createcurrent
hwErpsGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.256.2
hwErpsConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.256.3
hwErpsCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.256.3.1
hwErpsNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.256.4

Notifications

NameOIDStatus
hwErpsFwStateForwarding
NOTIFICATION-TYPE
Trap message is generated by ERPS node when it detects that the state of ERPS port changes to forwarding.
1.3.6.1.4.1.2011.5.25.256.4.1current
hwErpsFwStateDiscarding
NOTIFICATION-TYPE
Trap message is generated by ERPS node when it detects that the state of ERPS port changes to discarding.
1.3.6.1.4.1.2011.5.25.256.4.2current

Conformance

NameOIDStatus
hwErpsGlobalInfoGroup
OBJECT-GROUP
The group of global information.
1.3.6.1.4.1.2011.5.25.256.2.1current
hwErpsRingConfigInfoGroup
OBJECT-GROUP
The group of ring configuration.
1.3.6.1.4.1.2011.5.25.256.2.2current
hwErpsRingStatusInfoGroup
OBJECT-GROUP
The group of ring status.
1.3.6.1.4.1.2011.5.25.256.2.3current
hwErpsPortConfigInfoGroup
OBJECT-GROUP
The group of port configuration.
1.3.6.1.4.1.2011.5.25.256.2.4current
hwErpsPortStatusInfoGroup
OBJECT-GROUP
The group of port status.
1.3.6.1.4.1.2011.5.25.256.2.5current
hwErpsPortStatisticsInfoGroup
OBJECT-GROUP
The group of port information.
1.3.6.1.4.1.2011.5.25.256.2.6current
hwErpsPortTrackInfoGroup
OBJECT-GROUP
The group of ERPS port tracking information.
1.3.6.1.4.1.2011.5.25.256.2.7current
hwErpsNotificationGroup
NOTIFICATION-GROUP
The notification group.
1.3.6.1.4.1.2011.5.25.256.2.8current
hwErpsCompliance
MODULE-COMPLIANCE
The core compliance statement for all implementations.
1.3.6.1.4.1.2011.5.25.256.3.1.1current