MIBs Depot

HUAWEI-BFD-MIB

Registered at
1.3.6.1.4.1.2011.5.25.38
Last updated
2016-01-08 00:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2016-01-08 00:00, 2016-01-08 00:00, 2015-11-08 00:00, 2015-10-23 00:00, 2015-08-04 00:00, 2015-07-29 00:00, 2015-07-14 00:00, 2015-07-03 00:00, 2014-09-04 00:00, 2014-09-01 00:00, 2014-06-30 00:00, 2014-05-23 00:00, 2014-01-22 00:00, 2013-09-22 00:00, 2013-08-16 00:00, 2012-11-23 00:00, 2011-08-17 00:00, 2011-07-14 00:00, 2011-05-11 00:00, 2011-04-27 00:00, 2011-04-13 00:00, 2011-01-12 00:00, 2010-10-20 00:00, 2010-08-25 00:00, 2010-08-02 00:00, 2010-08-02 00:00, 2010-07-22 00:00, 2010-05-19 00:00, 2010-04-25 00:00, 2010-04-12 00:00, 2010-02-12 00:00, 2010-01-13 00:00, 2009-12-24 00:00, 2009-11-27 00:00, 2009-03-04 00:00, 2008-06-06 00:00, 2006-04-27 00:00
Namespace
huawei
Source file
HUAWEI-BFD-MIB
Digest
sha256:d507958fb7756f4202e02c2bd431af3cd1897c138a75908eff7259573adaea6a

Description

MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-MIBhwDatacomm
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-TCIpv6Address
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HUAWEI-BFD-MIB
HUAWEI-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-TC
P-BRIDGE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
BfdDiag
TEXTUAL-CONVENTION
Diagnostic code specifying the local system's reason for the last session state changed.
current
BfdInterval
TEXTUAL-CONVENTION
Bfd Time Interval Type.
current

Objects

NameOIDSyntaxAccessStatus
hwBfdScalarsObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.1
hwBfdVersionNumber
OBJECT-TYPE
The current version number of the BFD protocol is 1. Default: 1
1.3.6.1.4.1.2011.5.25.38.1.1Unsigned32read-onlycurrent
hwBfdAdminStatus
OBJECT-TYPE
Describe the administrative status of a BFD protocol. Options: 1. enabled(1) -denotes that the BFD Process is active on all interface 2. disabled(2) -denotes that the BFD process is disabled on all interfaces Default: 2
1.3.6.1.4.1.2011.5.25.38.1.2EnabledStatusread-writecurrent
hwBfdSessLimitNumber
OBJECT-TYPE
Define the maximum number of BFD sessions allowed in the logic router. Default: 0
1.3.6.1.4.1.2011.5.25.38.1.3Unsigned32read-onlycurrent
hwBfdSessInterfaceLimitNumber
OBJECT-TYPE
Define the maximum number of BFD sessions allowed per board. Default: 0
1.3.6.1.4.1.2011.5.25.38.1.4Unsigned32read-onlycurrent
hwBfdSessStaticNumber
OBJECT-TYPE
The total number of BFD static sessions. Default: 0
1.3.6.1.4.1.2011.5.25.38.1.5Unsigned32read-onlycurrent
hwBfdSessDynamicNumber
OBJECT-TYPE
The total number of BFD dynamic sessions. Default: 0
1.3.6.1.4.1.2011.5.25.38.1.6Unsigned32read-onlycurrent
hwBfdSessGlobalDefaultIpAddr
OBJECT-TYPE
Define the default multicast IP address used in BFD multicast detection. Default: 224.0.0.184
1.3.6.1.4.1.2011.5.25.38.1.7IpAddressread-writecurrent
hwBfdEchoPassiveStatus
OBJECT-TYPE
The passive Echo function of BFD. Options: 1. enabled(1) -denotes that the BFD EchoPassive capability is enabled 2. disabled(2) -denotes that the BFD EchoPassive capability is disabled Default: 2
1.3.6.1.4.1.2011.5.25.38.1.8EnabledStatusread-writecurrent
hwBfdEchoAclNum
OBJECT-TYPE
The Acl Number for passive Echo function of BFD. Default: 0
1.3.6.1.4.1.2011.5.25.38.1.9Unsigned32 (0 | 2000..2999)read-writecurrent
hwBfdSessDynamicPingInterval
OBJECT-TYPE
Define the sending interval of the MPLS echo packet. Default: 60 Unit: second
1.3.6.1.4.1.2011.5.25.38.1.10Unsigned32 (30..600)read-writecurrent
hwBfdSessDynamicSupportPassive
OBJECT-TYPE
The capability of automatically creating BFD sessions on the LSP egress. Options: 1. enabled(1) -denotes that the egress can create BFD sessions 2. disabled(2) -denotes that the egress can not create BFD sessions Default: 2
1.3.6.1.4.1.2011.5.25.38.1.11EnabledStatusread-writecurrent
hwBfdSessDelayUpTime
OBJECT-TYPE
Define delay interval before the session turns to up. Unit: second Default: 0
1.3.6.1.4.1.2011.5.25.38.1.12Unsigned32 (0..600)read-writecurrent
hwBfdSessMultiDstPort
OBJECT-TYPE
The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0. Default: 3784
1.3.6.1.4.1.2011.5.25.38.1.13Integer32 (0 | 3784 | 4784)read-writecurrent
hwBfdTrapSendInterval
OBJECT-TYPE
Define the sending interval of TRAP message. Unit: second Default: 120
1.3.6.1.4.1.2011.5.25.38.1.14Integer32 (0 | 1..600)read-writecurrent
hwBfdLimitDeviceName
OBJECT-TYPE
The device name which session number reached up limit.
1.3.6.1.4.1.2011.5.25.38.1.15OCTET STRINGread-onlycurrent
hwBfdDynamicSessionTos
OBJECT-TYPE
The Tos-Exp of dynamic session. Default: 7
1.3.6.1.4.1.2011.5.25.38.1.16Unsigned32 (0..7)read-writecurrent
hwBfdStaticSessionTos
OBJECT-TYPE
The Tos-Exp of static session. Default: 7
1.3.6.1.4.1.2011.5.25.38.1.17Unsigned32 (0..7 | 255)read-writecurrent
hwBfdDynamicSessionTosEx
OBJECT-TYPE
The extended Tos-Exp of dynamic session. Default: 7
1.3.6.1.4.1.2011.5.25.38.1.18Unsigned32 (0..7 | 255)read-writecurrent
hwBfdSessCfgRemoteFailType
OBJECT-TYPE
The virtual access AP notify process bfd session configuration failed. Options: 1. localDiscriminatorNonsupport(101) 2. localDiscriminatorConflict(102)
1.3.6.1.4.1.2011.5.25.38.1.19INTEGER {localDiscriminatorNonsupport(101), localDiscriminatorConflict(102)}accessible-for-notifycurrent
hwBfdObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.2
hwBfdIfConfTable
OBJECT-TYPE
The interface configuration table of BFD. The index of this table is hwBfdIfConfIndex.
1.3.6.1.4.1.2011.5.25.38.2.1not-accessiblecurrent
hwBfdIfConfEntry
OBJECT-TYPE
The interface configuration table of BFD. The index of this entry is hwBfdIfConfIndex.
1.3.6.1.4.1.2011.5.25.38.2.1.1not-accessiblecurrent
hwBfdIfConfIndex
OBJECT-TYPE
It is the configuration index of this interface. This index is automatically allocated inside the system and is not user-configurable.
1.3.6.1.4.1.2011.5.25.38.2.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
hwBfdIfConfName
OBJECT-TYPE
It is the name of this Interface.
1.3.6.1.4.1.2011.5.25.38.2.1.1.2OCTET STRING (SIZE(1..64))read-createcurrent
hwBfdIfConfEnable
OBJECT-TYPE
The flag whether the interface has enabled BFD. Options: 1. disable(0) -Indicates that the interface has disabled BFD 2. enable(1) -Indicates that the interface has enabled BFD
1.3.6.1.4.1.2011.5.25.38.2.1.1.3Integer32 (0..1)read-onlycurrent
hwBfdIfConfDeleting
OBJECT-TYPE
The flag that whether the interface is in deleting. Options: 1. notDeleted(0) -the interface is not deleted 2. deleted(1) -the interface is deleted
1.3.6.1.4.1.2011.5.25.38.2.1.1.4Integer32 (0..1)read-onlycurrent
hwBfdIfConfAvailable
OBJECT-TYPE
The flag that whether the interface is available. Options: 1. notAvailable(0) -the interface is not available 2. available(1) -the interface is available
1.3.6.1.4.1.2011.5.25.38.2.1.1.5Integer32 (0..1)read-onlycurrent
hwBfdIfConfSessCnt
OBJECT-TYPE
The number of sessions that has been bound to this interface.
1.3.6.1.4.1.2011.5.25.38.2.1.1.6Integer32read-onlycurrent
hwBfdIfConfRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.2011.5.25.38.2.1.1.7RowStatusread-createcurrent
hwBfdSessionConfTable
OBJECT-TYPE
BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this table is hwBfdSessConfName.
1.3.6.1.4.1.2011.5.25.38.2.2not-accessiblecurrent
hwBfdSessionConfEntry
OBJECT-TYPE
BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this entry is hwBfdSessConfName.
1.3.6.1.4.1.2011.5.25.38.2.2.1not-accessiblecurrent
hwBfdSessConfName
OBJECT-TYPE
It is the name of this configuration model.
1.3.6.1.4.1.2011.5.25.38.2.2.1.1OCTET STRING (SIZE(1..15))not-accessiblecurrent
hwBfdSessConfMIndex
OBJECT-TYPE
It is the configuration index of this session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.2Unsigned32 (1..4294967295)read-onlycurrent
hwBfdSessConfLocalDiscr
OBJECT-TYPE
Define the local discriminator of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.3Unsigned32 (0..4294967295)read-createcurrent
hwBfdSessConfRemoteDiscr
OBJECT-TYPE
Define the remote discriminator of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.4Unsigned32 (0..4294967295)read-createcurrent
hwBfdSessConfPeerAddr
OBJECT-TYPE
Define the IP address of the peer in the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.5IpAddressread-createcurrent
hwBfdSessConfBindIfIndex
OBJECT-TYPE
It is the index of the binding interface in the BFD configuration.
1.3.6.1.4.1.2011.5.25.38.2.2.1.6Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessConfBindIfName
OBJECT-TYPE
It is the name of the binding interface in the BFD configuration.
1.3.6.1.4.1.2011.5.25.38.2.2.1.7OCTET STRING (SIZE(1..64))read-createcurrent
hwBfdSessConfDemandEnable
OBJECT-TYPE
It is the flag of the BFD demand mode. Options: 1. disabled(0) -disable the BFD demand mode 2. enabled(1) -enable the BFD demand mode
1.3.6.1.4.1.2011.5.25.38.2.2.1.8Integer32 (0..1)read-createcurrent
hwBfdSessConfDemandTimerInterval
OBJECT-TYPE
Define the detecting interval in the BFD session with the demand mode. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.2.1.9Unsigned32 (0 | 500..300000)read-createcurrent
hwBfdSessConfDetectMult
OBJECT-TYPE
It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
1.3.6.1.4.1.2011.5.25.38.2.2.1.10Unsigned32 (3..50)read-createcurrent
hwBfdSessConfDesiredMinRxInterval
OBJECT-TYPE
This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.2.1.11BfdInterval (1..2147483647)read-createcurrent
hwBfdSessConfDesiredMinTxInterval
OBJECT-TYPE
This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.2.1.12BfdInterval (1..2147483647)read-createcurrent
hwBfdSessConfWTRInterval
OBJECT-TYPE
The wait-to-restore (WTR) time of the BFD session. The event that indicates the session changing into the Up state is reported to the application program only after the WTR times out. Unit: minute
1.3.6.1.4.1.2011.5.25.38.2.2.1.13Integer32 (0..60)read-createcurrent
hwBfdSessConfTOS
OBJECT-TYPE
This is the TOS value of bfd packet.
1.3.6.1.4.1.2011.5.25.38.2.2.1.14Integer32 (0..7)read-createcurrent
hwBfdSessConfPSTFlag
OBJECT-TYPE
The PST flag of the BFD session configuration. It indicates the status association between the current BFD session and the interface bound to the session. Options: 1. disabled(0) -indicates that the PST capability of the BFD session is disabled 2. enabled(1) -indicates that the PST capability of the BFD session is enabled
1.3.6.1.4.1.2011.5.25.38.2.2.1.15Integer32 (0..1)read-createcurrent
hwBfdSessConfCommitFlag
OBJECT-TYPE
It is the commit flag of the configuration entry. Options: 1. notCommit(0) -not commit 2. commit(1) -commit
1.3.6.1.4.1.2011.5.25.38.2.2.1.16Integer32 (0..1)read-createcurrent
hwBfdSessConfAdminStatus
OBJECT-TYPE
A BFD session can be administratively enabled or disabled. The AdminStatus field indicates the BFD session status. Options: 1. 0 -disable 2. 1 -enable
1.3.6.1.4.1.2011.5.25.38.2.2.1.17Integer32 (0..1)read-createcurrent
hwBfdSessConfRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.2011.5.25.38.2.2.1.18RowStatusread-createcurrent
hwBfdSessConfSourceAddr
OBJECT-TYPE
Define the source IP address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.19IpAddressread-createcurrent
hwBfdSessConfVrfIndex
OBJECT-TYPE
The index of the VPN interface.
1.3.6.1.4.1.2011.5.25.38.2.2.1.20Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessConfVPNName
OBJECT-TYPE
The name of VPN interface.
1.3.6.1.4.1.2011.5.25.38.2.2.1.21OCTET STRING (SIZE(1..31))read-createcurrent
hwBfdSessConfDefaultIp
OBJECT-TYPE
BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
1.3.6.1.4.1.2011.5.25.38.2.2.1.22INTEGER {no(1), yes(2)}read-createcurrent
hwBfdSessConfPISFlag
OBJECT-TYPE
The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -associate with interface state 3. subif(3) -associate with interface and correlative sub interface
1.3.6.1.4.1.2011.5.25.38.2.2.1.23INTEGER {false(1), true(2), subif(3)}read-createcurrent
hwBfdSessConfBindType
OBJECT-TYPE
The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
1.3.6.1.4.1.2011.5.25.38.2.2.1.24INTEGER {interfaceIp(1), peerIp(2), sourceIp(3), ifAndSourceIp(4), fec(5), tunnelIf(6), ospf(7), isis(8), ldpLsp(9), staticLsp(10), teLsp(11), teTunnel(12), pw(13), vsiPw(15), ldpTunnel(21), bgpTunnel(22)}read-createcurrent
hwBfdSessConfNextHop
OBJECT-TYPE
It is the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.25IpAddressread-createcurrent
hwBfdSessConfStaticLspName
OBJECT-TYPE
It is the static LSP name of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.26OCTET STRING (SIZE(1..20))read-createcurrent
hwBfdSessConfPWSecondaryFlag
OBJECT-TYPE
The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2)-secondary PW 3. flagNoPW(3) -no PW
1.3.6.1.4.1.2011.5.25.38.2.2.1.27INTEGER {flagMasterPW(1), flagSecondaryPW(2), flagNoPW(3)}read-createcurrent
hwBfdSessConfTunnelDetectType
OBJECT-TYPE
Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
1.3.6.1.4.1.2011.5.25.38.2.2.1.28INTEGER {flagBothDown(1), flagNeighborDown(2)}read-createcurrent
hwBfdSessConfVcId
OBJECT-TYPE
It is the ID of VC.
1.3.6.1.4.1.2011.5.25.38.2.2.1.29Unsigned32 (0..4294967295)read-createcurrent
hwBfdSessConfVsiName
OBJECT-TYPE
It is the name of VSI.
1.3.6.1.4.1.2011.5.25.38.2.2.1.30OCTET STRING (SIZE(1..31))read-createcurrent
hwBfdSessConfVsiPeerAddr
OBJECT-TYPE
It is the peer-ip of VSI.
1.3.6.1.4.1.2011.5.25.38.2.2.1.31IpAddressread-createcurrent
hwBfdSessConfDiscrAuto
OBJECT-TYPE
Describe whether the discriminator can be auto allocated. Options: 1.enabled(1) -the discriminator can be allocated automatically 2.disabled(2) -the discriminator can not be allocated automatically
1.3.6.1.4.1.2011.5.25.38.2.2.1.32EnabledStatusread-createcurrent
hwBfdSessConfPeerIpv6Addr
OBJECT-TYPE
Define the peer IPv6 address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.33Ipv6Addressread-createcurrent
hwBfdSessConfSourceIpv6Addr
OBJECT-TYPE
Define the source IPv6 address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.34Ipv6Addressread-createcurrent
hwBfdSessConfIpv6NextHop
OBJECT-TYPE
It is the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.35Ipv6Addressread-onlycurrent
hwBfdSessConfIsIpv6Addr
OBJECT-TYPE
Whether the peer address of the BFD session is IPv6 address.
1.3.6.1.4.1.2011.5.25.38.2.2.1.36TruthValueread-createcurrent
hwBfdSessConfKeychainName
OBJECT-TYPE
Specify the name of the keychain for authentication.
1.3.6.1.4.1.2011.5.25.38.2.2.1.37OCTET STRING (SIZE(1..47))read-createcurrent
hwBfdSessConfMeticulous
OBJECT-TYPE
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
1.3.6.1.4.1.2011.5.25.38.2.2.1.38EnabledStatusread-createcurrent
hwBfdSessConfLooseAuthentication
OBJECT-TYPE
Whether loose authentication check. Options: 1.True(1) -loose-check 2.False(2) -do not loose-check
1.3.6.1.4.1.2011.5.25.38.2.2.1.39TruthValueread-createcurrent
hwBfdSessConfOneArmEcho
OBJECT-TYPE
The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode
1.3.6.1.4.1.2011.5.25.38.2.2.1.40EnabledStatusread-createcurrent
hwBfdSessConfMinEchoRxInterval
OBJECT-TYPE
The value of this object identifies the minimum interval between received BFD Control packets, in milliseconds.This value reflects the capability of receiving BFD Control packets. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.2.1.41Unsigned32 (0 | 1..4294967295)read-createcurrent
hwBfdSessConfPWTtlMode
OBJECT-TYPE
The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3)-indicates that the TTL is 255 by default 4. none(4) -indicates that the TTL is not in PW mode
1.3.6.1.4.1.2011.5.25.38.2.2.1.42INTEGER {config(1), auto(2), default(3), none(4)}read-createcurrent
hwBfdSessConfPWTtl
OBJECT-TYPE
The value of this object identifies the TTL used by the BFD session for PW. The vlaue is configurable only when the configuration mode of a TTL is config.
1.3.6.1.4.1.2011.5.25.38.2.2.1.43Integer32 (0..255)read-createcurrent
hwBfdSessConfRemotePeerIpType
OBJECT-TYPE
The value of this object identifies the type of the destination address of the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.2.1.44InetAddressTyperead-createcurrent
hwBfdSessConfRemotePeerIp
OBJECT-TYPE
The value of this object identifies the destination IP address of the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.2.1.45InetAddressread-createcurrent
hwBfdSessConfSelectBoard
OBJECT-TYPE
This object indicates the main processing board of a BFD session.
1.3.6.1.4.1.2011.5.25.38.2.2.1.46DisplayString (SIZE(1..47))read-createcurrent
hwBfdSessConfPWSPE
OBJECT-TYPE
The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
1.3.6.1.4.1.2011.5.25.38.2.2.1.47INTEGER {upe(1), spe(2), none(3)}read-createcurrent
hwBfdSessConfPWTrackIfName
OBJECT-TYPE
This object indicates the interface monitored by the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.2.1.48DisplayString (SIZE(1..64))read-createcurrent
hwBfdSessConfIsPWTrackIf
OBJECT-TYPE
The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2)-disables the BFD session for PW from monitoring the interface
1.3.6.1.4.1.2011.5.25.38.2.2.1.49EnabledStatusread-createcurrent
hwBfdSessConfEncapsulationType
OBJECT-TYPE
The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking
1.3.6.1.4.1.2011.5.25.38.2.2.1.50DisplayString (SIZE(1..63))read-createcurrent
hwBfdSessConfPEVid
OBJECT-TYPE
The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination.
1.3.6.1.4.1.2011.5.25.38.2.2.1.51Unsigned32 (0..4094)read-createcurrent
hwBfdSessConfCEVid
OBJECT-TYPE
The value of this object identifies the inner tag in QinQ packets.
1.3.6.1.4.1.2011.5.25.38.2.2.1.52Unsigned32 (0..4094)read-createcurrent
hwBfdSessConfTOSEx
OBJECT-TYPE
This is the extended TOS value of bfd packet.
1.3.6.1.4.1.2011.5.25.38.2.2.1.53Integer32 (0..7 | 255)read-createcurrent
hwBfdSessConfbImpactFlag
OBJECT-TYPE
BFD session impact interface when the device reboot Options: 1. no(1) -do not impact interface when the device reboot 2. yes(2) -impact interface when the device reboot
1.3.6.1.4.1.2011.5.25.38.2.2.1.54INTEGER {no(1), yes(2)}read-createcurrent
hwBfdSessionTable
OBJECT-TYPE
The BFD Session Table describes the BFD sessions. The index of this table is hwBfdSessIndex.
1.3.6.1.4.1.2011.5.25.38.2.3not-accessiblecurrent
hwBfdSessionEntry
OBJECT-TYPE
The BFD Session Table describes the BFD sessions. The index of this entry is hwBfdSessIndex.
1.3.6.1.4.1.2011.5.25.38.2.3.1not-accessiblecurrent
hwBfdSessIndex
OBJECT-TYPE
It is unique and the Index of this session. This index is automatically allocated inside the system and is not user-configurable.
1.3.6.1.4.1.2011.5.25.38.2.3.1.1Unsigned32 (1..4294967295)accessible-for-notifycurrent
hwBfdSessMIndex
OBJECT-TYPE
This value indicate the configuration has Main Index.
1.3.6.1.4.1.2011.5.25.38.2.3.1.2Unsigned32 (1..4294967295)read-onlycurrent
hwBfdSessBindVRRP
OBJECT-TYPE
Describe the capability of bound with VRRP for the BFD session. Options: 1. notBind(0) -not bind 2. bind(1) -bind
1.3.6.1.4.1.2011.5.25.38.2.3.1.3Integer32 (0..1)read-onlycurrent
hwBfdSessCfgName
OBJECT-TYPE
This indicate the name of the session which will be display course information or statistic information of the session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.4OCTET STRING (SIZE(1..15))read-onlycurrent
hwBfdSessPeerAddr
OBJECT-TYPE
Define the peer IP address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.5IpAddressread-onlycurrent
hwBfdSessBindIfIndex
OBJECT-TYPE
It is the index of the binding interface in the BFD session
1.3.6.1.4.1.2011.5.25.38.2.3.1.6Integer32 (0..2147483647)read-onlycurrent
hwBfdSessBindIfName
OBJECT-TYPE
It is the name of the binding interface in the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.7OCTET STRING (SIZE(0..64))read-onlycurrent
hwBfdSessLocalDiscr
OBJECT-TYPE
A unique, nonzero discriminator value generated by the transmitting system, used to demultiplex multiple BFD sessions between the same pair of system.
1.3.6.1.4.1.2011.5.25.38.2.3.1.8Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessRemoteDiscr
OBJECT-TYPE
The discriminator received from the corresponding remote system. This field reflects back the received value of My Discriminator, or is zero if that value is unknown.
1.3.6.1.4.1.2011.5.25.38.2.3.1.9Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessOperMode
OBJECT-TYPE
Describe the current operating mode configured with the BFD session. Options: 1. 0 -asynchronous mode with echo function 2. 1 -asynchronous mode without echo function 3. 2 -demand mode with echo function 4. 3 -demand mode without echo function 5. 4 -asynchronous One-arm-echo mode
1.3.6.1.4.1.2011.5.25.38.2.3.1.10Integer32 (0..4)read-onlycurrent
hwBfdSessDetectMult
OBJECT-TYPE
Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode. Default: 3
1.3.6.1.4.1.2011.5.25.38.2.3.1.11Unsigned32 (3..50)read-onlycurrent
hwBfdSessDemandTimerInterval
OBJECT-TYPE
It is the detecting interval in the BFD session with the demand mode. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.3.1.12BfdIntervalread-onlycurrent
hwBfdSessActualRxInterval
OBJECT-TYPE
This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.3.1.13BfdIntervalread-onlycurrent
hwBfdSessActualTxInterval
OBJECT-TYPE
This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond
1.3.6.1.4.1.2011.5.25.38.2.3.1.14BfdIntervalread-onlycurrent
hwBfdSessWTRInterval
OBJECT-TYPE
The WTR interval of the BFD session. Unit: minute
1.3.6.1.4.1.2011.5.25.38.2.3.1.15Integer32 (0..60)read-onlycurrent
hwBfdSessTOS
OBJECT-TYPE
This is the TOS value of bfd packet.
1.3.6.1.4.1.2011.5.25.38.2.3.1.16Integer32 (0..7)read-onlycurrent
hwBfdSessState
OBJECT-TYPE
Describe the current state of the BFD session. Options: 1. 0 -admin down 2. 1 -down 3. 2 -init 4. 3 -up
1.3.6.1.4.1.2011.5.25.38.2.3.1.17Integer32 (0..3)read-onlycurrent
hwBfdSessDiag
OBJECT-TYPE
A diagnostic code specifying the local system's reason for the last session state change. Options: 1. 0 -no diagnostic 2. 1 -control detection time expired 3. 2 -echo function failed 4. 3 -neighbor signaled session down 5. 4 -forwarding plane reset 6. 5 -path down 7. 6 -concatenated path down 8. 7 -administratively down 9. 8 -reverse concatenated path down 10. 9 -neighbor signaled session down (receive admindown) 11. 10-31 -reserved for future use
1.3.6.1.4.1.2011.5.25.38.2.3.1.18Integer32 (0..31)read-onlycurrent
hwBfdSessSourceAddr
OBJECT-TYPE
The source address of the session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.19IpAddressread-onlycurrent
hwBfdSessVrfIndex
OBJECT-TYPE
The index of the VPN interface.
1.3.6.1.4.1.2011.5.25.38.2.3.1.20Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessVPNName
OBJECT-TYPE
The name of VPN interface.
1.3.6.1.4.1.2011.5.25.38.2.3.1.21OCTET STRING (SIZE(1..31))read-onlycurrent
hwBfdSessType
OBJECT-TYPE
The type of the BFD session. Options: 1. static(1) -static 2. dynamic(2) -dynamic 3. entireDynamic(3) -entire dynamic 4. auto(4) -auto
1.3.6.1.4.1.2011.5.25.38.2.3.1.22INTEGER {static(1), dynamic(2), entireDynamic(3), auto(4)}read-onlycurrent
hwBfdSessBindAppType
OBJECT-TYPE
The Application type that this BFD session has been bound to Options: 1. noApplication(1) -No application 2. vrrp(2) -VRRP 3. ifnet(3) -IFNET 4. vrrpAndIfnet(4) -VRRP&IFNET 5. bgp(5) -BGP 6. ospf(6) -OSPF 7. bgpAndOspf(7) -BGP&OSPF 8. oamLspmL2vpn(8) -OAM&LSPM&L2VPN (for LDP LSP and static LSP) 9. oamTnlL2vpn(9) -OAM&TUNNEL&L2VPN (for TE_Tunnnel) 10. lspmL2vpnTnlps(10) -LSPM&TUNNEL_PS&L2VPN (for TE_LSP) 11. oamMplsfwL2vpn(11) -OAM&MPLSFW&L2VPN (for PW) 12. isis(12) -ISIS 13. vsiPw(13) -VSIPW (for VSI PW) 14. vrrpOamLspmL2vpn(14) -VRRP&OAM&LSPM&L2VPN 15. vrrpOamTnlL2vpn(15) -VRRP&OAM&TUNNEL&L2VPN 16. vrrpLspmL2vpnTnlps(16) -VRRP&LSPM&TUNNEL_PS&L2VPN 17. vrrpOamMplsfwL2vpn(17) -VRRP&OAM&MPLSFW&L2VPN 18. pim(18) -PIM 19. bgpIsis(19) -BGP&ISIS 20. bgpPim(20) -BGP&PIM 21. ospfIsis(21) -OSPF&ISIS 22. ospfPim(22) -OSPF&PIM 23. isisPim(23) -ISIS&PIM 24. bgpOspfIsis(24) -BGP&OSPF&ISIS 25. bgpOspfPim(25) -BGP&OSPF&PIM 26. bgpIsisPim(26) -BGP&ISIS&PIM 27. ospfIsisPim(27) -OSPF&ISIS&PIM 28. bgpOspfIsisPim(28) -BGPOSPF&ISIS&PIM 29. bgp6(29) -BGP6 30. ospfv3(30) -OSPFV3 31. isis6(31) -ISIS6 32. pim6(32) -PIM6 33. bgp6Ospfv3(33) -BGP6&OSPFV3 34. bgp6Isis6(34) -BGP6&ISIS6 35. bgp6Pim6(35) -BGP6&PIM6 36. ospfv3Isis6(36) -OSPFV3&ISIS6 37. ospfv3Pim6(37) -OSPFV3&PIM6 38. isis6Pim6(38) -ISIS6&PIM6 39. bgp6Ospfv3Isis6(39) -BGP6&OSPFV3&ISIS6 40. bgp6Ospfv3Pim6(40) -BGP6&OSPFV3&PIM6 41. bgp6Isis6Pim6(41) -BGP6&ISIS6&PIM6 42. ospfv3Isis6Pim6(42) -OSPFV3&ISIS6&PIM6 43. bgp6Ospfv3Isis6Pim6(43) -BGP6&OSPFV3&ISIS6&PIM6 44. auto(44) -AUTO 45. autoIsis(45) -AUTO&ISIS 46. autoOspf(46) -AUTO&OSPF 47. autoBgp(47) -AUTO&BGP 48. autoPim(48) -AUTO&PIM 49. autoIsisOspf(49) -AUTO&ISIS&OSPF 50. autoIsisBgp(50) -AUTO&ISIS&BGP 51. autoIsisPim(51) -AUTO&ISIS&PIM 52. autoOspfBgp(52) -AUTO&OSPF&BGP 53. autoOspfPim(53) -AUTO&OSPF&PIM 54. autoBgpPim(54) -AUTO&BGP&PIM 55. autoIsisOspfBgp(55) -AUTO&ISIS&OSPF&BGP 56. autoIsisOspfBgpPim(56) -AUTO&ISIS&OSPF&BGP&PIM 57. autoIsis6(57) -AUTO&ISIS6 58. autoOspfv3(58) -AUTO&OSPFV3 59. autoBgp6(59) -AUTO&BGP6 60. autoPim6(60) -AUTO&PIM6 61. autoIsis6Ospfv3(61) -AUTO&ISIS6&OSPFV3 62. autoIsis6Bgp6(62) -AUTO&ISIS6&BGP6 63. autoIsis6Pim6(63) -AUTO&ISIS6&PIM6 64. autoOspfv3Bgp6(64) -AUTO&OSPFV3&BGP6) 65. autoOspfv3Pim6(65) -AUTO&OSPFV3&PIM6) 66. autoBgp6Pim6(66) -AUTO&BGP6&PIM6 67. autoIsis6Ospfv3Bgp6(67) -AUTO&ISIS6&OSPFV3&BGP6 68. autoIsis6Ospfv3Bgp6Pim6(68) -AUTO&ISIS6&OSPFV3&BGP6&PIM6 69. etrunk(69) -ETRUNK 70. etrunkIfnet(70) -ETRUNK&IFNET 71. etrunkVrrp(71) -ETRUNK&VRRP 72. etrunkVrrpIfnet(72) -ETRUNK&VRRP&IFNET 73. etrunkOamLspmL2vpn(73) -ETRUNK&OAM&LSPM&L2VPN 74. etrunkOamTnlL2vpn(74) -ETRUNK&OAM&TNL&L2VPN 75. etrunkLspmL2vpnTnlps(75) -ETRUNK&LSPM&L2VPN&TNLPS 76. etrunkOamMplsfwL2vpn(76) -ETRUNK&OAM&MPLSFW&L2VPN 77. etrunkvsiPw(77) -ETRUNK&VSIPW 78. etrunkOamLspmL2vpnVrrp(78) -ETRUNK&OAM&LSPM&L2VPN&VRRP 79. etrunkOamTnlL2vpnVrrp(79) -ETRUNK&OAM&TNL&L2VPN&VRRP 80. etrunkLspmL2vpnTnlpsVrrp(80) -ETRUNK&LSMP&L2VPN&TNLPS&VRRP 81. etrunkOamMplsfwL2vpnVrrp(81) -ETRUNK&OAM&MPLSFW&L2VPN&VRRP 82. rip(82) -RIP 83. bgpRip(83) -BGP&RIP 84. ospfRip(84) -OSPF&RIP 85. isisRip(85) -ISIS&RIP 86. pimRip(86) -PIM&RIP 87. bgpOspfRip(87) -BGP&OSPF&RIP 88. bgpIsisRip(88) -BGP&ISIS&RIP 89. bgpPimRip(89) -BGP&PIM&RIP 90. ospfIsisRip(90) -OSPF&ISIS&RIP 91. ospfPimRip(91) -OSPF&PIM&RIP 92. isisPimRip(92) -ISIS&PIM&RIP 93. bgpOspfIsisRip(93) -BGP&OSPF&ISIS&RIP 94. bgpOspfPimRip(94) -BGP&OSPF&PIM&RIP 95. ospfIsisPimRip(95) -OSPF&ISIS&PIM&RIP 96. autoRip(96) -AUTO&RIP 97. autoBgpRip(97) -AUTO&BGP&RIP 98. autoOspfRip(98) -AUTO&OSPF&RIP 99. autoIsisRip(99) -AUTO&ISIS&RIP 100. autoPimRip(100) -AUTO&PIM&RIP 101. autoBgpOspfRip(101) -AUTO&BGP&OSPF&RIP 102. autoBgpIsisRip(102) -AUTO&BGP&ISIS&RIP 103. autoBgpPimRip(103) -AUTO&BGP&PIM&RIP 104. autoOspfIsisRip(104) -AUTO&OSPF&ISIS&RIP 105. autoOspfPimRip(105) -AUTO&OSPF&PIM&RIP 106. autoIsisPimRip(106) -AUTO&ISIS&PIM&RIP 107. autoBgpOspfIsisRip(107) -AUTO&BGP&OSPF&ISIS&RIP 108. autoBgpOspfPimRip(108) -AUTO&BGP&OSPF&PIM&RIP 109. autoOspfIsisPimRip(109) -AUTO&OSPF&ISIS&PIM&RIP 110. autoIsisOspfBgpPimVrrp(110) -AUTO&ISIS&OSPF&BGP&PIM&VRRP 111. autoIsisOspfPimVrrp(111) -AUTO&ISIS&OSPF&PIM&VRRP 112. autoIsisOspfBgpVrrp(112) -AUTO&ISIS&OSPF&BGP&VRRP 113. autoIsisBgpPimVrrp(113) -AUTO&ISIS&BGP&PIM&VRRP 114. autoOspfBgpPimVrrp(114) -AUTO&OSPF&BGP&PIM&VRRP 115. autoIsisOspfVrrp(115) -AUTO&ISIS&OSPF&VRRP 116. autoIsisBgpVrrp(116) -AUTO&ISIS&BGP&VRRP 117. autoOspfBgpVrrp(117) -AUTO&OSPF&BGP&VRRP 118. autoIsisPimVrrp(118) -AUTO&ISIS&PIM&VRRP 119. autoOspfPimVrrp(119) -AUTO&OSPF&PIM&VRRP 120. autoBgpPimVrrp(120) -AUTO&BGP&PIM&VRRP 121. autoIsisVrrp(121) -AUTO&ISIS&VRRP 122. autoOspfVrrp(122) -AUTO&OSPF&VRRP 123. autoBgpVrrp(123) -AUTO&BGP&VRRP 124. autoPimVrrp(124) -AUTO&PIM&VRRP 125. autoVrrp(125) -AUTO&VRRP 126. autoVrrpBgp6(126) -AUTO&VRRP&BGP6 127. autoOspfv3Isis6Pim6(127) -AUTO&OSPFV3&ISIS6&PIM6 128. autoOspfBgpPim(128) -AUTO&OSPF&BGP&PIM 129. autoIsisOspfPim(129) -AUTO&ISIS&OSPF&PIM 130. autoIsisPimBgp(130) -AUTO&ISIS&BGP&PIM 131. bgpOspfIsisPimRip(131) -BGP&OSPF&ISIS&PIM&RIP 132. autoBgpOspfIsisPimRip(132) -AUTO&BGP&OSPF&ISIS&PIM&RIP 133. bgpRsvp(133) -BGP&RSVP 134. ospfRsvp(134) -OSPF&RSVP 135. isisRsvp(135) -ISIS&RSVP 136. pimRsvp(136) -PIM&RSVP 137. ripRsvp(137) -RIP&RSVP 138. bgpOspfRsvp(138) -BGP&OSPF&RSVP 139. bgpIsisRsvp(139) -BGP&ISIS&RSVP 140. bgpPimRsvp(140) -BGP&PIM&RSVP 141. bgpRipRsvp(141) -BGP&RIP&RSVP 142. ospfIsisRsvp(142) -OSPF&ISIS&RSVP 143. ospfPimRsvp(143) -OSPF&PIM&RSVP 144. ospfRipRsvp(144) -OSPF&RIP&RSVP 145. isisPimRsvp(145) -ISIS&PIM&RSVP 146. isisRipRsvp(146) -ISIS&RIP&RSVP 147. pimRipRsvp(147) -PIM&RIP&RSVP 148. bgpOspfIsisRsvp(148) -BGP&OSPF&ISIS&RSVP 149. bgpOspfPimRsvp(149) -BGP&OSPF&PIM&RSVP 150. bgpOspfRipRsvp(150) -BGP&OSPF&RIP&RSVP 151. bgpIsisPimRsvp(151) -BGP&ISIS&PIM&RSVP 152. bgpIsisRipRsvp(152) -BGP&ISIS&RIP&RSVP 153. bgpPimRipRsvp(153) -BGP&PIM&RIP&RSVP 154. ospfIsisPimRsvp(154) -OSPF&ISIS&PIM&RSVP 155. ospfIsisRipRsvp(155) -OSPF&ISIS&RIP&RSVP 156. isisPimRipRsvp(156) -ISIS&PIM&RIP&RSVP 157. bgpOspfIsisPimRsvp(157) -BGP&OSPF&ISIS&PIM&RSVP 158. bgpOspfIsisRipRSvp(158) -BGP&OSPF&ISIS&RIP&RSVP 159. bgpOspfPimRipRsvp(159) -BGP&OSPF&PIM&RIP&RSVP 160. bgpIsisPimRipRsvp(160) -BGP&ISIS&PIM&RIP&RSVP 161. ospfIsisPimRipRsvp(161) -OSPF&ISIS&PIM&RIP&RSVP 162. bgpOspfIsisPimRipRsvp(162) -BGP&OSPF&ISIS&PIM&RIP&RSVP 163. autoRsvp(163) -AUTO&RSVP 164. autoBgpRsvp(164) -AUTO&BGP&RSVP 165. autoOspfRsvp(165) -AUTO&OSPF&RSVP 166. autoIsisRsvp(166) -AUTO&ISIS&RSVP 167. autoPimRsvp(167) -AUTO&PIM&RSVP 168. autoRipRsvp(168) -AUTO&RIP&RSVP 169. autoBgpOspfRsvp(169) -AUTO&BGP&OSPF&RSVP 170. autoBgpIsisRsvp(170) -AUTO&BGP&ISIS&RSVP 171. autoBgpPimRsvp(171) -AUTO&BGP&PIM&RSVP 172. autoBgpRipRsvp(172) -AUTO&BGP&RIP&RSVP 173. autoOspfIsisRsvp(173) -AUTO&OSPF&ISIS&RSVP 174. autoOspfPimRsvp(174) -AUTO&OSPF&PIM&RSVP 175. autoOspfRipRsvp(175) -AUTO&OSPF&RIP&RSVP 176. autoIsisPimRsvp(176) -AUTO&ISIS&PIM&RSVP 177. autoIsisRipRsvp(177) -AUTO&ISIS&RIP&RSVP 178. autoPimRipRsvp(178) -AUTO&PIM&RIP&RAVP 179. autoBgpOspfIsisRsvp(179) -AUTO&BGP&OSPF&ISIS&RSVP 180. autoBgpOspfPimRsvp(180) -AUTO&BGP&OSPF&PIM&RSVP 181. autoBgpOspfRipRsvp(181) -AUTO&BGP&OSPF&RIP&RSVP 182. autoOspfIsisPimRsvp(182) -AUTO&OSPF&ISIS&PIM&RSVP 183. autoOspfIsisRipRsvp(183) -AUTO&OSPF&ISIS&RIP&RSVP 184. autoIsisPimRipRsvp(184) -AUTO&ISIS&PIM&RIP&RSVP 185. autoBgpOspfIsisPimRsvp(185) -AUTO&BGP&OSPF&ISIS&PIM&RSVP 186. autoBgpOspfIsisRipRsvp(186) -AUTO&BGP&OSPF&ISIS&RIP&RSVP 187. autoOspfIsisPimRipRsvp(187) -AUTO&OSPF&ISIS&PIM&RIP&RSVP 188. rsvp(188) -RSVP
1.3.6.1.4.1.2011.5.25.38.2.3.1.23INTEGER {noApplication(1), vrrp(2), ifnet(3), vrrpAndIfnet(4), bgp(5), ospf(6), bgpAndOspf(7), oamLspmL2vpn(8), oamTnlL2vpn(9), lspmL2vpnTnlps(10), oamMplsfwL2vpn(11), isis(12), vsiPw(13), vrrpOamLspmL2vpn(14), vrrpOamTnlL2vpn(15), vrrpLspmL2vpnTnlps(16), vrrpOamMplsfwL2vpn(17), pim(18), bgpIsis(19), bgpPim(20), ospfIsis(21), ospfPim(22), isisPim(23), bgpOspfIsis(24), bgpOspfPim(25), bgpIsisPim(26), ospfIsisPim(27), bgpOspfIsisPim(28), bgp6(29), ospfv3(30), isis6(31), pim6(32), bgp6Ospfv3(33), bgp6Isis6(34), bgp6Pim6(35), ospfv3Isis6(36), ospfv3Pim6(37), isis6Pim6(38), bgp6Ospfv3Isis6(39), bgp6Ospfv3Pim6(40), bgp6Isis6Pim6(41), ospfv3Isis6Pim6(42), bgp6Ospfv3Isis6Pim6(43), auto(44), autoIsis(45), autoOspf(46), autoBgp(47), autoPim(48), autoIsisOspf(49), autoIsisBgp(50), autoIsisPim(51), autoOspfBgp(52), autoOspfPim(53), autoBgpPim(54), autoIsisOspfBgp(55), autoIsisOspfBgpPim(56), autoIsis6(57), autoOspfv3(58), autoBgp6(59), autoPim6(60), autoIsis6Ospfv3(61), autoIsis6Bgp6(62), autoIsis6Pim6(63), autoOspfv3Bgp6(64), autoOspfv3Pim6(65), autoBgp6Pim6(66), autoIsis6Ospfv3Bgp6(67), autoIsis6Ospfv3Bgp6Pim6(68), etrunk(69), etrunkIfnet(70), etrunkVrrp(71), etrunkVrrpIfnet(72), etrunkOamLspmL2vpn(73), etrunkOamTnlL2vpn(74), etrunkLspmL2vpnTnlps(75), etrunkOamMplsfwL2vpn(76), etrunkvsiPw(77), etrunkOamLspmL2vpnVrrp(78), etrunkOamTnlL2vpnVrrp(79), etrunkLspmL2vpnTnlpsVrrp(80), etrunkOamMplsfwL2vpnVrrp(81), rip(82), bgpRip(83), ospfRip(84), isisRip(85), pimRip(86), bgpOspfRip(87), bgpIsisRip(88), bgpPimRip(89), ospfIsisRip(90), ospfPimRip(91), isisPimRip(92), bgpOspfIsisRip(93), bgpOspfPimRip(94), ospfIsisPimRip(95), autoRip(96), autoBgpRip(97), autoOspfRip(98), autoIsisRip(99), autoPimRip(100), autoBgpOspfRip(101), autoBgpIsisRip(102), autoBgpPimRip(103), autoOspfIsisRip(104), autoOspfPimRip(105), autoIsisPimRip(106), autoBgpOspfIsisRip(107), autoBgpOspfPimRip(108), autoOspfIsisPimRip(109), autoIsisOspfBgpPimVrrp(110), autoIsisOspfPimVrrp(111), autoIsisOspfBgpVrrp(112), autoIsisBgpPimVrrp(113), autoOspfBgpPimVrrp(114), autoIsisOspfVrrp(115), autoIsisBgpVrrp(116), autoOspfBgpVrrp(117), autoIsisPimVrrp(118), autoOspfPimVrrp(119), autoBgpPimVrrp(120), autoIsisVrrp(121), autoOspfVrrp(122), autoBgpVrrp(123), autoPimVrrp(124), autoVrrp(125), autoVrrpBgp6(126), autoOspfv3Isis6Pim6(127), autoOspfBgpPim(128), autoIsisOspfPim(129), autoIsisPimBgp(130), bgpOspfIsisPimRip(131), autoBgpOspfIsisPimRip(132), bgpRsvp(133), ospfRsvp(134), isisRsvp(135), pimRsvp(136), ripRsvp(137), bgpOspfRsvp(138), bgpIsisRsvp(139), bgpPimRsvp(140), bgpRipRsvp(141), ospfIsisRsvp(142), ospfPimRsvp(143), ospfRipRsvp(144), isisPimRsvp(145), isisRipRsvp(146), pimRipRsvp(147), bgpOspfIsisRsvp(148), bgpOspfPimRsvp(149), bgpOspfRipRsvp(150), bgpIsisPimRsvp(151), bgpIsisRipRsvp(152), bgpPimRipRsvp(153), ospfIsisPimRsvp(154), ospfIsisRipRsvp(155), isisPimRipRsvp(156), bgpOspfIsisPimRsvp(157), bgpOspfIsisRipRSvp(158), bgpOspfPimRipRsvp(159), bgpIsisPimRipRsvp(160), ospfIsisPimRipRsvp(161), bgpOspfIsisPimRipRsvp(162), autoRsvp(163), autoBgpRsvp(164), autoOspfRsvp(165), autoIsisRsvp(166), autoPimRsvp(167), autoRipRsvp(168), autoBgpOspfRsvp(169), autoBgpIsisRsvp(170), autoBgpPimRsvp(171), autoBgpRipRsvp(172), autoOspfIsisRsvp(173), autoOspfPimRsvp(174), autoOspfRipRsvp(175), autoIsisPimRsvp(176), autoIsisRipRsvp(177), autoPimRipRsvp(178), autoBgpOspfIsisRsvp(179), autoBgpOspfPimRsvp(180), autoBgpOspfRipRsvp(181), autoOspfIsisPimRsvp(182), autoOspfIsisRipRsvp(183), autoIsisPimRipRsvp(184), autoBgpOspfIsisPimRsvp(185), autoBgpOspfIsisRipRsvp(186), autoOspfIsisPimRipRsvp(187), rsvp(188)}read-onlycurrent
hwBfdSessDefaultIp
OBJECT-TYPE
BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
1.3.6.1.4.1.2011.5.25.38.2.3.1.24INTEGER {no(1), yes(2)}read-onlycurrent
hwBfdSessPISFlag
OBJECT-TYPE
The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -ssociate with interface state 3. subif(3) -associate with interface and correlative sub interface
1.3.6.1.4.1.2011.5.25.38.2.3.1.25INTEGER {false(1), true(2), subif(3)}read-onlycurrent
hwBfdSessBindType
OBJECT-TYPE
The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW; 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
1.3.6.1.4.1.2011.5.25.38.2.3.1.26INTEGER {interfaceIp(1), peerIp(2), sourceIp(3), ifAndSourceIp(4), fec(5), tunnelIf(6), ospf(7), isis(8), ldpLsp(9), staticLsp(10), teLsp(11), teTunnel(12), pw(13), vsiPw(15), ldpTunnel(21), bgpTunnel(22)}read-onlycurrent
hwBfdSessNextHop
OBJECT-TYPE
It is the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.27IpAddressread-onlycurrent
hwBfdSessStaticLspName
OBJECT-TYPE
It is the static LSP name of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.28OCTET STRING (SIZE(0..20))read-onlycurrent
hwBfdSessLspIndex
OBJECT-TYPE
It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.
1.3.6.1.4.1.2011.5.25.38.2.3.1.29Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessPWSecondaryFlag
OBJECT-TYPE
The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2) -secondary PW 3. flagNoPW(3) -no PW Default: 1
1.3.6.1.4.1.2011.5.25.38.2.3.1.30INTEGER {flagMasterPW(1), flagSecondaryPW(2), flagNoPW(3)}read-onlycurrent
hwBfdSessTunnelDetectType
OBJECT-TYPE
Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down Default: 1
1.3.6.1.4.1.2011.5.25.38.2.3.1.31INTEGER {flagBothDown(1), flagNeighborDown(2)}read-onlycurrent
hwBfdSessVcId
OBJECT-TYPE
It is the ID of VC.
1.3.6.1.4.1.2011.5.25.38.2.3.1.32Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessVsiName
OBJECT-TYPE
It is the name of VSI.
1.3.6.1.4.1.2011.5.25.38.2.3.1.33OCTET STRING (SIZE(0..31))read-onlycurrent
hwBfdSessVsiPeerAddr
OBJECT-TYPE
It is the peer-ip of VSI.
1.3.6.1.4.1.2011.5.25.38.2.3.1.34IpAddressread-onlycurrent
hwBfdSessDiscrAuto
OBJECT-TYPE
Describe whether the discriminator can be auto allocated. Options: 1. enabled(1) -the discriminator can be allocated automatically 2. disabled(2) -the discriminator can not be allocated automatically Default: disabled
1.3.6.1.4.1.2011.5.25.38.2.3.1.35EnabledStatusread-onlycurrent
hwBfdSessPeerIpv6Addr
OBJECT-TYPE
Define the peer IPv6 address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.36Ipv6Addressread-onlycurrent
hwBfdSessSourceIpv6Addr
OBJECT-TYPE
Define the source IPv6 address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.37Ipv6Addressread-onlycurrent
hwBfdSessIpv6NextHop
OBJECT-TYPE
It is the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.38Ipv6Addressread-onlycurrent
hwBfdSessIsIPv6Addr
OBJECT-TYPE
Whether the peer address of the BFD session is IPv6 address. Default: false
1.3.6.1.4.1.2011.5.25.38.2.3.1.39TruthValueread-onlycurrent
hwBfdSessMeticulous
OBJECT-TYPE
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type Default: 2
1.3.6.1.4.1.2011.5.25.38.2.3.1.40EnabledStatusread-onlycurrent
hwBfdSessLooseAuthentication
OBJECT-TYPE
Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false
1.3.6.1.4.1.2011.5.25.38.2.3.1.41TruthValueread-onlycurrent
hwBfdSessAuthenticationStatus
OBJECT-TYPE
Authentication status of the bfd session Options: 1. 0 -authentication disable 2. 1 -interface board do not support bfd authentication 3. 2 -keychain does not exist 4. 3 -auth BFD session number exceed 5. 4 -authentication in operation normally 100. 100 -exception Default: 0
1.3.6.1.4.1.2011.5.25.38.2.3.1.42Integer32read-onlycurrent
hwBfdSessOneArmEcho
OBJECT-TYPE
The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode Default: disabled
1.3.6.1.4.1.2011.5.25.38.2.3.1.43EnabledStatusread-onlycurrent
hwBfdSessPWTtlMode
OBJECT-TYPE
The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3) -indicates that the TTL is 255 by default 4. nottl(4) -indicates that the TTL is not in PW mode
1.3.6.1.4.1.2011.5.25.38.2.3.1.44INTEGER {config(1), auto(2), default(3), nottl(4)}read-onlycurrent
hwBfdSessPWTtl
OBJECT-TYPE
The value of this object identifies the TTL used by the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.3.1.45Integer32 (0..255)read-onlycurrent
hwBfdSessRemotePeerIpType
OBJECT-TYPE
The value of this object identifies the type of the destination address of the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.3.1.46InetAddressTyperead-onlycurrent
hwBfdSessRemotePeerIp
OBJECT-TYPE
The value of this object identifies the destination IP address of the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.3.1.47InetAddressread-onlycurrent
hwBfdSessSelectBoard
OBJECT-TYPE
This object indicates the main processing board of a BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.48DisplayString (SIZE(1..47))read-onlycurrent
hwBfdSessPWSPE
OBJECT-TYPE
The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
1.3.6.1.4.1.2011.5.25.38.2.3.1.49INTEGER {upe(1), spe(2), none(3)}read-onlycurrent
hwBfdSessPWTrackIfName
OBJECT-TYPE
This object indicates the interface monitored by the BFD session for PW.
1.3.6.1.4.1.2011.5.25.38.2.3.1.50DisplayString (SIZE(1..64))read-onlycurrent
hwBfdSessIsPWTrackIf
OBJECT-TYPE
The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2) -disables the BFD session for PW from monitoring the interface
1.3.6.1.4.1.2011.5.25.38.2.3.1.51EnabledStatusread-onlycurrent
hwBfdSessEncapsulationType
OBJECT-TYPE
The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking
1.3.6.1.4.1.2011.5.25.38.2.3.1.52DisplayString (SIZE(1..63))read-onlycurrent
hwBfdSessPEVid
OBJECT-TYPE
The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination.
1.3.6.1.4.1.2011.5.25.38.2.3.1.53Unsigned32 (0..4094)read-onlycurrent
hwBfdSessCEVid
OBJECT-TYPE
The value of this object identifies the inner tag in QinQ packets.
1.3.6.1.4.1.2011.5.25.38.2.3.1.54Unsigned32 (0..4094)read-onlycurrent
hwBfdSessPeerInetAddrType
OBJECT-TYPE
The value of this object identifies the type of the destination address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.55InetAddressTyperead-onlycurrent
hwBfdSessPeerInetAddr
OBJECT-TYPE
The value of this object identifies the destination IP address of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.56InetAddressread-onlycurrent
hwBfdSessInetNextHopType
OBJECT-TYPE
The value of this object identifies the type of the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.57InetAddressTyperead-onlycurrent
hwBfdSessInetNextHop
OBJECT-TYPE
The value of this object identifies the next hop of the BFD session.
1.3.6.1.4.1.2011.5.25.38.2.3.1.58InetAddressread-onlycurrent
hwBfdSessBindAppTypeMask
OBJECT-TYPE
A value which indicates the set of applications that this BFD session binds. Every bit indicates a application. The corresponding bit and applications are as follows: bit application 0 IFNET 1 Route-Management 2 OSPF 3 ISISL1 4 ISISL2 5 PIM 6 ISISL1L2 7 BGP 8 VRRP 9 LSPM 10 RSVP 11 LDP 12 TE 13 Product Private APP 14 L2VPN 15 OAM_MANAGER 16 VTE 17 VPW 18 MPLSFW 19 VGMP 20 LSPV 21 VSI_PW 22 ETHOAM 23 AUTO 24 E-TRUNK 25 OSPFv3 26 ISISL1_6 27 ISISL2_6 28 PIM6 29 ISISL1L2_6 30 BGP6 31 RM6 32 RBS 33 RIP 34 FRP 35 BGPLSP
1.3.6.1.4.1.2011.5.25.38.2.3.1.59OCTET STRINGread-onlycurrent
hwBfdSessDscp
OBJECT-TYPE
This is the dscp value of bfd packet. 255 is invalid value.
1.3.6.1.4.1.2011.5.25.38.2.3.1.60Integer32 (0..63 | 255)read-onlycurrent
hwBfdSessPWId
OBJECT-TYPE
It is the ID of PW.
1.3.6.1.4.1.2011.5.25.38.2.3.1.61Unsigned32 (0..4294967295)read-onlycurrent
hwBfdSessionPerTable
OBJECT-TYPE
This table specifies BFD Session performance counters. The index of this table is hwBfdSessPerIndex.
1.3.6.1.4.1.2011.5.25.38.2.4not-accessiblecurrent
hwBfdSessionPerEntry
OBJECT-TYPE
This table specifies BFD Session performance counters. The index of this entry is hwBfdSessPerIndex.
1.3.6.1.4.1.2011.5.25.38.2.4.1not-accessiblecurrent
hwBfdSessPerIndex
OBJECT-TYPE
The index of BFD session statistics. This index is automatically allocated inside the system and is not user-configurable.
1.3.6.1.4.1.2011.5.25.38.2.4.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
hwBfdSessPerfPktIn
OBJECT-TYPE
The statistical information of the received Octets in local system in this session.The total received packet number.
1.3.6.1.4.1.2011.5.25.38.2.4.1.2Counter32read-onlycurrent
hwBfdSessPerfPktInHC
OBJECT-TYPE
The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number.
1.3.6.1.4.1.2011.5.25.38.2.4.1.3Counter32read-onlycurrent
hwBfdSessPerfPktOut
OBJECT-TYPE
The statistical information of the send Packets in local system in this session.
1.3.6.1.4.1.2011.5.25.38.2.4.1.4Counter32read-onlycurrent
hwBfdSessPerfPktOutHC
OBJECT-TYPE
The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number.
1.3.6.1.4.1.2011.5.25.38.2.4.1.5Counter32read-onlycurrent
hwBfdSessPerfBadIn
OBJECT-TYPE
The statistical information of the received Errors in local system in this session.
1.3.6.1.4.1.2011.5.25.38.2.4.1.6Counter32read-onlycurrent
hwBfdSessPerfBadInHC
OBJECT-TYPE
The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number.
1.3.6.1.4.1.2011.5.25.38.2.4.1.7Counter32read-onlycurrent
hwBfdSessPerfBadOut
OBJECT-TYPE
The statistical information of the send Errors in local system in this session.
1.3.6.1.4.1.2011.5.25.38.2.4.1.8Counter32read-onlycurrent
hwBfdSessPerfBadOutHC
OBJECT-TYPE
The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number.
1.3.6.1.4.1.2011.5.25.38.2.4.1.9Counter32read-onlycurrent
hwBfdSessPerfLastSessDownTime
OBJECT-TYPE
The time of session last time down.
1.3.6.1.4.1.2011.5.25.38.2.4.1.10OCTET STRINGread-onlycurrent
hwBfdSessPerfSessDownCount
OBJECT-TYPE
The total count of session down.
1.3.6.1.4.1.2011.5.25.38.2.4.1.11Unsigned32read-onlycurrent
hwBfdSessPerfSessShortBreakCount
OBJECT-TYPE
The total count of session shortbreak.
1.3.6.1.4.1.2011.5.25.38.2.4.1.12Unsigned32read-onlycurrent
hwBfdSessionPerStartTime
OBJECT-TYPE
The time that session start detection.
1.3.6.1.4.1.2011.5.25.38.2.4.1.13OCTET STRINGread-onlycurrent
hwBfdSlotTable
OBJECT-TYPE
The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this table is hwBfdSlotID.
1.3.6.1.4.1.2011.5.25.38.2.5not-accessiblecurrent
hwBfdSlotEntry
OBJECT-TYPE
The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this entry is hwBfdSlotID.
1.3.6.1.4.1.2011.5.25.38.2.5.1not-accessiblecurrent
hwBfdSlotID
OBJECT-TYPE
The ID of slot.
1.3.6.1.4.1.2011.5.25.38.2.5.1.1Unsigned32 (0..31)not-accessiblecurrent
hwBfdSlotReserveOneHopSessNum
OBJECT-TYPE
The number of session reserving for one-hop session on the board.
1.3.6.1.4.1.2011.5.25.38.2.5.1.2Unsigned32 (0..512)read-createcurrent
hwBfdSlotOneHopSessNum
OBJECT-TYPE
The number of session for one-hop session on the board.
1.3.6.1.4.1.2011.5.25.38.2.5.1.3Unsigned32 (0..512)read-onlyobsolete
hwBfdSlotCurrentSessNum
OBJECT-TYPE
The number of session on the board on current.
1.3.6.1.4.1.2011.5.25.38.2.5.1.4Unsigned32 (0..512)read-onlycurrent
hwBfdSlotRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.2011.5.25.38.2.5.1.5RowStatusread-createcurrent
hwBfdTtlConfTable
OBJECT-TYPE
The TTL configuration table. The index of this table is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType.
1.3.6.1.4.1.2011.5.25.38.2.6not-accessiblecurrent
hwBfdTtlConfEntry
OBJECT-TYPE
The TTL configuration table. The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType.
1.3.6.1.4.1.2011.5.25.38.2.6.1not-accessiblecurrent
hwBfdTtlConfAddr
OBJECT-TYPE
IP address.
1.3.6.1.4.1.2011.5.25.38.2.6.1.1IpAddressnot-accessiblecurrent
hwBfdTtlConfMaskLen
OBJECT-TYPE
Length of IP address mask.
1.3.6.1.4.1.2011.5.25.38.2.6.1.2Integer32 (8..32)not-accessiblecurrent
hwBfdTtlConfType
OBJECT-TYPE
Type of BFD session. Options: 1. singleHop(1) -single hop bfd session 2. multiHop(2) -multi hop bfd session
1.3.6.1.4.1.2011.5.25.38.2.6.1.3INTEGER {singleHop(1), multiHop(2)}not-accessiblecurrent
hwBfdTtlConfValue
OBJECT-TYPE
TTL value.
1.3.6.1.4.1.2011.5.25.38.2.6.1.4Integer32 (1..255)read-createcurrent
hwBfdTtlConfRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.2011.5.25.38.2.6.1.50RowStatusread-createcurrent
hwBfdPassiveAuthTable
OBJECT-TYPE
The authentication configuration table for entire dynamic bfd session on egress. The index of this table is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
1.3.6.1.4.1.2011.5.25.38.2.7not-accessiblecurrent
hwBfdPassiveAuthEntry
OBJECT-TYPE
The authentication configuration table for entire dynamic bfd session on egress. The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
1.3.6.1.4.1.2011.5.25.38.2.7.1not-accessiblecurrent
hwBfdPassiveAuthPeerAddr
OBJECT-TYPE
Specify the Lsr-id IP address of the ingress.
1.3.6.1.4.1.2011.5.25.38.2.7.1.1IpAddressread-createcurrent
hwBfdPassiveAuthProtocol
OBJECT-TYPE
Specify the protocol on ingress. Options: 1. te(1) -MPLS TE protocol 2. ldp(2) -MPLS LDP protocol
1.3.6.1.4.1.2011.5.25.38.2.7.1.2Integer32 (1..2)read-createcurrent
hwBfdPassiveAuthKeychainName
OBJECT-TYPE
Specify the name of the keychain for authentication of entire dynamic bfd session.
1.3.6.1.4.1.2011.5.25.38.2.7.1.3OCTET STRING (SIZE(1..47))read-createcurrent
hwBfdPassiveAuthMeticulous
OBJECT-TYPE
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type Default: 2
1.3.6.1.4.1.2011.5.25.38.2.7.1.4EnabledStatusread-onlycurrent
hwBfdPassiveAuthLoose
OBJECT-TYPE
Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false
1.3.6.1.4.1.2011.5.25.38.2.7.1.5TruthValueread-onlycurrent
hwBfdPassiveAuthRowStatus
OBJECT-TYPE
The status of this table entry.
1.3.6.1.4.1.2011.5.25.38.2.7.1.50RowStatusread-createcurrent
hwBfdNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.3
hwBfdConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.4
hwBfdCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.4.1
hwBfdGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.4.2
hwBfdTrapsVbOids
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.5
hwBfdSessVlanID
OBJECT-TYPE
The VLANID binding to BFD session.
1.3.6.1.4.1.2011.5.25.38.5.1Integer32accessible-for-notifycurrent
hwBfdCfgApUserName
OBJECT-TYPE
The name of user failed to configure access point.
1.3.6.1.4.1.2011.5.25.38.5.2OCTET STRING (SIZE(0..128))accessible-for-notifycurrent
hwBfdCfgApIPAddress
OBJECT-TYPE
The IP-address of user failed to configure access point.
1.3.6.1.4.1.2011.5.25.38.5.3OCTET STRING (SIZE(0..128))accessible-for-notifycurrent
hwBfdCfgApID
OBJECT-TYPE
The ID of access point failed to be configured.
1.3.6.1.4.1.2011.5.25.38.5.4Unsigned32 (1..8191)accessible-for-notifycurrent
hwBfdCfgApOperation
OBJECT-TYPE
The operation of confiuration to access point.
1.3.6.1.4.1.2011.5.25.38.5.5OCTET STRING (SIZE(0..128))accessible-for-notifycurrent
hwBfdCfgApReason
OBJECT-TYPE
The reason of failed to configure access point.
1.3.6.1.4.1.2011.5.25.38.5.6OCTET STRING (SIZE(0..128))accessible-for-notifycurrent
hwBfdTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.6
hwBfdCommonTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.6.1
hwBfdAlarmTraps
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.6.2
hwBfdAlarmTrapsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.38.6.2.0

Notifications

NameOIDStatus
hwBfdSessDown
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.1current
hwBfdSessUp
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.2current
hwBfdSessReachLimit
NOTIFICATION-TYPE
There is the notify when the session number reach the global limit.
1.3.6.1.4.1.2011.5.25.38.3.3current
hwBfdSessReachLimitBindIf
NOTIFICATION-TYPE
There is the notify when the session number reach the interface limit.
1.3.6.1.4.1.2011.5.25.38.3.4current
hwBfdSessReachLimitResume
NOTIFICATION-TYPE
There is the notify when the session number reach the global limit was cleared.
1.3.6.1.4.1.2011.5.25.38.3.5current
hwBfdSessReachLimitBindIfResume
NOTIFICATION-TYPE
There is the notify when the session number reach the interface limit was cleared.
1.3.6.1.4.1.2011.5.25.38.3.6current
hwBfdSessCfgRemoteFail
NOTIFICATION-TYPE
This notification is generated when the virtual access AP process BFD configuration failed.
1.3.6.1.4.1.2011.5.25.38.3.7current
hwBfdSessFaultDown
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.8current
hwBfdSessResume
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session resume from down state. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.9current
hwBfdSessApOperFailed
NOTIFICATION-TYPE
The operation failed to config access point.
1.3.6.1.4.1.2011.5.25.38.3.10current
hwBfdSessFsmDiscordant
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session FSM's board is different from the monitored link's board. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.11current
hwBfdSessFsmAccordant
NOTIFICATION-TYPE
This trap occurred when the state of the BFD session FSM's board is the same as the monitored link's board. The BFD session is characterized by the objects in this node.
1.3.6.1.4.1.2011.5.25.38.3.12current
hwBfdSessUpTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.1current
hwBfdSessDownTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.2current
hwBfdv6SingleHopSessUpTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.3current
hwBfdv6SingleHopSessDownTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.4current
hwBfdv6MultiHopSessUpTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.5current
hwBfdv6MultiHopSessDownTrap
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.6current
hwBfdPWSessUp
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.7current
hwBfdPWSessDown
NOTIFICATION-TYPE
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
1.3.6.1.4.1.2011.5.25.38.6.2.0.8current

Conformance

NameOIDStatus
hwBfdFullCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Huawei BFD MIB.
1.3.6.1.4.1.2011.5.25.38.4.1.1current
hwBfdGroup
OBJECT-GROUP
A collection of objects providing BFD global information.
1.3.6.1.4.1.2011.5.25.38.4.2.1current
hwBfdSessGroup
OBJECT-GROUP
A collection of objects providing BFD session information.
1.3.6.1.4.1.2011.5.25.38.4.2.2current
hwBfdObsoleteGroup
OBJECT-GROUP
A collection of objects which are obsolete.
1.3.6.1.4.1.2011.5.25.38.4.2.3obsolete
hwBfdNotificationGroup
NOTIFICATION-GROUP
A collection of traps.
1.3.6.1.4.1.2011.5.25.38.4.2.4current