MIBs Depot

HUAWEI-ATM-MIB

Registered at
1.3.6.1.4.1.2011.5.25.156
Last updated
2007-10-17 22:30
Organization
Huawei Technologies co.,Ltd.
Namespace
huawei
Source file
HUAWEI-ATM-MIB
Digest
sha256:9c67360ec6f890d2578145d8e3bd60abce7744b1f874e7c9f6fdd849ad221cc8

Description

This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI.

Contact

VRP Team Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085

Imports

FromSymbols
ATM-TC-MIBAtmVcIdentifier, AtmVpIdentifier
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
HUAWEI-ATM-MIB
HUAWEI-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwAtmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.156.1
hwAtmTable
OBJECT-TYPE
This table is used to configure the parameters of the ATM interface.
1.3.6.1.4.1.2011.5.25.156.1.1not-accessiblecurrent
hwAtmEntry
OBJECT-TYPE
This table is used to configure the parameters of the ATM interface.
1.3.6.1.4.1.2011.5.25.156.1.1.1not-accessiblecurrent
hwAtmIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.1.1.1InterfaceIndexnot-accessiblecurrent
hwAtmIfType
OBJECT-TYPE
Indicates the interface type.
1.3.6.1.4.1.2011.5.25.156.1.1.1.11INTEGER {oc3OrStm1(1), oc12OrStm4(2)}read-onlycurrent
hwAtmClock
OBJECT-TYPE
Master clock: uses the internal clock signal. Slave clock: uses the line clock signal.
1.3.6.1.4.1.2011.5.25.156.1.1.1.12INTEGER {master(1), slave(2)}read-writecurrent
hwAtmFrameFormat
OBJECT-TYPE
For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame format is SDH.
1.3.6.1.4.1.2011.5.25.156.1.1.1.13INTEGER {sdh(1), sonet(2)}read-writecurrent
hwAtmScramble
OBJECT-TYPE
By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. false: disables the scramble function.
1.3.6.1.4.1.2011.5.25.156.1.1.1.14TruthValueread-writecurrent
hwAtmLoopback
OBJECT-TYPE
Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled.
1.3.6.1.4.1.2011.5.25.156.1.1.1.15INTEGER {local(1), remote(2), payload(3), none(255)}read-writecurrent
hwAtmMapPvpTable
OBJECT-TYPE
This table is used to configure the mapping between the peer VPI and the local VPI.
1.3.6.1.4.1.2011.5.25.156.1.2not-accessiblecurrent
hwAtmMapPvpEntry
OBJECT-TYPE
This table is used to configure the mapping between the peer VPI and the local VPI.
1.3.6.1.4.1.2011.5.25.156.1.2.1not-accessiblecurrent
hwAtmMapPvpIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.2.1.1InterfaceIndexnot-accessiblecurrent
hwAtmMapPvpVplVpi
OBJECT-TYPE
Indicates the local VPI value. The value is an integer ranging from 0 to 255.
1.3.6.1.4.1.2011.5.25.156.1.2.1.2AtmVpIdentifiernot-accessiblecurrent
hwAtmMapPvpRemoteVplVpi
OBJECT-TYPE
Indicates the peer VPI value. The value is an integer ranging from 0 to 255.
1.3.6.1.4.1.2011.5.25.156.1.2.1.11AtmVpIdentifierread-createcurrent
hwAtmMapPvpRowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.156.1.2.1.51RowStatusread-createcurrent
hwAtmMapPvcTable
OBJECT-TYPE
This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI.
1.3.6.1.4.1.2011.5.25.156.1.3not-accessiblecurrent
hwAtmMapPvcEntry
OBJECT-TYPE
This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI.
1.3.6.1.4.1.2011.5.25.156.1.3.1not-accessiblecurrent
hwAtmMapPvcRemoteVclVci
OBJECT-TYPE
Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 2047. Generally, the values from 0 to 31 are reserved for specail use.
1.3.6.1.4.1.2011.5.25.156.1.3.1.11AtmVcIdentifierread-createcurrent
hwAtmMapPvcRemoteVclVpi
OBJECT-TYPE
Indicates the peer VPI value. The value is an integer ranging from 0 to 255.
1.3.6.1.4.1.2011.5.25.156.1.3.1.12AtmVpIdentifierread-createcurrent
hwAtmMapPvcRowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.156.1.3.1.51RowStatusread-createcurrent
hwAtmServiceTable
OBJECT-TYPE
This table is used to configure the service type and related parameters for the PVC.
1.3.6.1.4.1.2011.5.25.156.1.4not-accessiblecurrent
hwAtmServiceEntry
OBJECT-TYPE
This table is used to configure the service type for the PVC.
1.3.6.1.4.1.2011.5.25.156.1.4.1not-accessiblecurrent
hwAtmServiceName
OBJECT-TYPE
Indicates the name of the service type. The name is a string of 1 to 31 characters.
1.3.6.1.4.1.2011.5.25.156.1.4.1.1OCTET STRING (SIZE(1..31))not-accessiblecurrent
hwAtmServiceType
OBJECT-TYPE
Set the service type for the PVC as required.
1.3.6.1.4.1.2011.5.25.156.1.4.1.11INTEGER {cbr(1), vbrNrt(2), vbrRt(3), ubr(4), ubrPlus(5)}read-createcurrent
hwAtmServiceOutputPcr
OBJECT-TYPE
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0.
1.3.6.1.4.1.2011.5.25.156.1.4.1.12Integer32 (0 | 64..149760)read-createcurrent
hwAtmServiceOutputScr
OBJECT-TYPE
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
1.3.6.1.4.1.2011.5.25.156.1.4.1.13Integer32 (0 | 64..149760)read-createcurrent
hwAtmServiceOutputMbs
OBJECT-TYPE
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
1.3.6.1.4.1.2011.5.25.156.1.4.1.14Integer32 (0 | 1..512)read-createcurrent
hwAtmServiceCbrCdvtValue
OBJECT-TYPE
Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0.
1.3.6.1.4.1.2011.5.25.156.1.4.1.15Integer32 (0..10000)read-createcurrent
hwAtmServiceOutputMcr
OBJECT-TYPE
Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0.
1.3.6.1.4.1.2011.5.25.156.1.4.1.16Integer32 (0 | 64..149760)read-createcurrent
hwAtmServiceRowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.156.1.4.1.51RowStatusread-createcurrent
hwAtmPvcServiceTable
OBJECT-TYPE
This table is used to configure the service type for the PVC.
1.3.6.1.4.1.2011.5.25.156.1.5not-accessiblecurrent
hwAtmPvcServiceEntry
OBJECT-TYPE
This table is used to configure the service type for the PVC.
1.3.6.1.4.1.2011.5.25.156.1.5.1not-accessiblecurrent
hwAtmPvcServiceName
OBJECT-TYPE
Indicates the name of the service type. The name is a string of 1 to 31 characters.
1.3.6.1.4.1.2011.5.25.156.1.5.1.11OCTET STRING (SIZE(1..31))read-createcurrent
hwAtmPvcTransmittalDirection
OBJECT-TYPE
Indicates the input or output tpye of the service type.
1.3.6.1.4.1.2011.5.25.156.1.5.1.21INTEGER {input(1), output(2)}read-createcurrent
hwAtmPvcServiceRowStatus
OBJECT-TYPE
This variable is used to create or delete an object.
1.3.6.1.4.1.2011.5.25.156.1.5.1.51RowStatusread-createcurrent
hwAtmIfConfTable
OBJECT-TYPE
Indicates the configuration of the ATM interface.
1.3.6.1.4.1.2011.5.25.156.1.11not-accessiblecurrent
hwAtmIfConfEntry
OBJECT-TYPE
Indicates the configuration of the ATM interface.
1.3.6.1.4.1.2011.5.25.156.1.11.1not-accessiblecurrent
hwAtmIfConfIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.11.1.1InterfaceIndexnot-accessiblecurrent
hwAtmIfConfMaxVccs
OBJECT-TYPE
Indicates the maximum number of the PVCs.
1.3.6.1.4.1.2011.5.25.156.1.11.1.11Integer32 (1..2048)read-writecurrent
hwAtmIfConfOperVccs
OBJECT-TYPE
Indicates the number of the configured PVCs.
1.3.6.1.4.1.2011.5.25.156.1.11.1.12Integer32read-onlycurrent
hwAtmIfConfIntfType
OBJECT-TYPE
This object indicates the type of the serial interface with the ATM protocol.
1.3.6.1.4.1.2011.5.25.156.1.11.1.13INTEGER {uni(1), nni(2)}read-writecurrent
hwAtmVplTable
OBJECT-TYPE
Indicates the configuration of the ATM PVP.
1.3.6.1.4.1.2011.5.25.156.1.12not-accessiblecurrent
hwAtmVplEntry
OBJECT-TYPE
Indicates the configuration of the ATM PVP.
1.3.6.1.4.1.2011.5.25.156.1.12.1not-accessiblecurrent
hwAtmVplIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.12.1.1InterfaceIndexnot-accessiblecurrent
hwAtmVplVpi
OBJECT-TYPE
VPI.
1.3.6.1.4.1.2011.5.25.156.1.12.1.2AtmVpIdentifiernot-accessiblecurrent
hwAtmVplRowStatus
OBJECT-TYPE
Indicates the status of the row.
1.3.6.1.4.1.2011.5.25.156.1.12.1.51RowStatusread-createcurrent
hwAtmVclTable
OBJECT-TYPE
Indicates the configuration of the ATM PVC.
1.3.6.1.4.1.2011.5.25.156.1.13not-accessiblecurrent
hwAtmVclEntry
OBJECT-TYPE
Indicates the configuration of the ATM PVC.
1.3.6.1.4.1.2011.5.25.156.1.13.1not-accessiblecurrent
hwAtmVclIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.13.1.1InterfaceIndexnot-accessiblecurrent
hwAtmVclVpi
OBJECT-TYPE
VPI.
1.3.6.1.4.1.2011.5.25.156.1.13.1.2AtmVpIdentifiernot-accessiblecurrent
hwAtmVclVci
OBJECT-TYPE
VCI.
1.3.6.1.4.1.2011.5.25.156.1.13.1.3AtmVcIdentifiernot-accessiblecurrent
hwAtmVclName
OBJECT-TYPE
Indicates the name of the PVC.
1.3.6.1.4.1.2011.5.25.156.1.13.1.11OCTET STRING (SIZE(0..16))read-createcurrent
hwAtmVccAal5EncapsType
OBJECT-TYPE
Indicates the encapsulation mode of AAL5.
1.3.6.1.4.1.2011.5.25.156.1.13.1.12INTEGER {aal5Snap(1), aal5Mux(2), aal5MuxNonstandard(3), aal5Nlpid(4)}read-createcurrent
hwAtmVclRowStatus
OBJECT-TYPE
Indicates the status of the row.
1.3.6.1.4.1.2011.5.25.156.1.13.1.51RowStatusread-createcurrent
hwAtmPvcIpoaTable
OBJECT-TYPE
This table is used to configure the IPoA mapping on the PVC.
1.3.6.1.4.1.2011.5.25.156.1.14not-accessiblecurrent
hwAtmPvcIpoaEntry
OBJECT-TYPE
This table is used to configure the IPoA mapping on the PVC.
1.3.6.1.4.1.2011.5.25.156.1.14.1not-accessiblecurrent
hwAtmPvcIpoaType
OBJECT-TYPE
Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route attributes. If no mapping of the next hop address of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping. inarp: configures InARP on the PVC.
1.3.6.1.4.1.2011.5.25.156.1.14.1.3INTEGER {ip(1), default(2), inarp(3)}not-accessiblecurrent
hwAtmPvcIpoaIpAddress
OBJECT-TYPE
Indicates the peer IP address mapped to the PVC.
1.3.6.1.4.1.2011.5.25.156.1.14.1.4IpAddressnot-accessiblecurrent
hwAtmPvcIpoaIpMask
OBJECT-TYPE
Indicates the IP address mask. The IP address mask is an optional parameter.
1.3.6.1.4.1.2011.5.25.156.1.14.1.11IpAddressread-createcurrent
hwAtmPvcIpoaInarpInterval
OBJECT-TYPE
Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the value is 0. The default value is 1.
1.3.6.1.4.1.2011.5.25.156.1.14.1.12Integer32 (0 | 1..600)read-createcurrent
hwAtmPvcIpoaBroadcast
OBJECT-TYPE
If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC.
1.3.6.1.4.1.2011.5.25.156.1.14.1.13TruthValueread-createcurrent
hwAtmPvcIpoaRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.2011.5.25.156.1.14.1.51RowStatusread-createcurrent
hwAtmPvcBridgeTable
OBJECT-TYPE
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC.
1.3.6.1.4.1.2011.5.25.156.1.15not-accessiblecurrent
hwAtmPvcBridgeEntry
OBJECT-TYPE
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC.
1.3.6.1.4.1.2011.5.25.156.1.15.1not-accessiblecurrent
hwAtmPvcBridgeDstIfIndex
OBJECT-TYPE
Indicates the index of the VE interface.
1.3.6.1.4.1.2011.5.25.156.1.15.1.11InterfaceIndexread-createcurrent
hwAtmPvcBridgeRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.2011.5.25.156.1.15.1.51RowStatusread-createcurrent
hwAtmPvcOamLoopbackTable
OBJECT-TYPE
This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check.
1.3.6.1.4.1.2011.5.25.156.1.17not-accessiblecurrent
hwAtmPvcOAMLoopbackEntry
OBJECT-TYPE
This table is used to configure OAM F5 Loopback.
1.3.6.1.4.1.2011.5.25.156.1.17.1not-accessiblecurrent
hwAtmPvcOAMLoopbackFrequency
OBJECT-TYPE
Indicates the interval for sending OAM F5 Loopback cells.
1.3.6.1.4.1.2011.5.25.156.1.17.1.11Integer32 (1..600)read-createcurrent
hwAtmPvcOAMLoopbackUpCount
OBJECT-TYPE
Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up.
1.3.6.1.4.1.2011.5.25.156.1.17.1.12Integer32 (1..600)read-createcurrent
hwAtmPvcOAMLoopbackDownCount
OBJECT-TYPE
Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down.
1.3.6.1.4.1.2011.5.25.156.1.17.1.13Integer32 (1..600)read-createcurrent
hwAtmPvcOAMLoopbackRetryFrequency
OBJECT-TYPE
Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes.
1.3.6.1.4.1.2011.5.25.156.1.17.1.14Integer32 (1..1000)read-createcurrent
hwAtmPvcOAMLoopbackRowStatus
OBJECT-TYPE
RowStatus
1.3.6.1.4.1.2011.5.25.156.1.17.1.51RowStatusread-createcurrent
hwAtmPvpLimitTable
OBJECT-TYPE
This table is used to configure the VP limit. To monitor the VP, configure related VP parameters.
1.3.6.1.4.1.2011.5.25.156.1.18not-accessiblecurrent
hwAtmPvpLimitEntry
OBJECT-TYPE
This table is used to configure the VP limit.
1.3.6.1.4.1.2011.5.25.156.1.18.1not-accessiblecurrent
hwAtmPvpLimitIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.156.1.18.1.1InterfaceIndexnot-accessiblecurrent
hwAtmPvpLimitVpi
OBJECT-TYPE
VPI.
1.3.6.1.4.1.2011.5.25.156.1.18.1.2AtmVpIdentifiernot-accessiblecurrent
hwAtmPvpLimitPeakRate
OBJECT-TYPE
VCI.
1.3.6.1.4.1.2011.5.25.156.1.18.1.11Integer32read-createcurrent
hwAtmPvpLimitRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.2011.5.25.156.1.18.1.51RowStatusread-createcurrent
hwAtmConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.156.11
hwAtmCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.156.11.1
hwAtmGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.156.11.2

Conformance

NameOIDStatus
hwAtmCompliance
MODULE-COMPLIANCE
The compliance statement for systems supporting the HUAWEI-ATM-MIB.
1.3.6.1.4.1.2011.5.25.156.11.1.1current
hwAtmObjectGroup
OBJECT-GROUP
The Atm attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.1current
hwAtmIfConf
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.156.11.2.2current
hwAtmVplObjectGroup
OBJECT-GROUP
The Atm Pvc Bridge attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.3current
hwAtmVclObjectGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.156.11.2.4current
hwAtmMapPvpObjectGroup
OBJECT-GROUP
The Atm Map Pvp attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.5current
hwAtmMapPvcObjectGroup
OBJECT-GROUP
The Atm Map Pvc attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.6current
hwAtmServiceObjectGroup
OBJECT-GROUP
The Atm Service attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.7current
hwAtmPvcServiceObjectGroup
OBJECT-GROUP
The Atm Pvc Service attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.8current
hwAtmPvcIpoaObjectGroup
OBJECT-GROUP
The Atm Pvc IPOA attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.9current
hwAtmPvcBridgeObjectGroup
OBJECT-GROUP
The Atm Pvl attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.10current
hwAtmPvcOAMLoopbackObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.11current
hwAtmPvpLimitObjectGroup
OBJECT-GROUP
The Port attribute group.
1.3.6.1.4.1.2011.5.25.156.11.2.12current