MIBs Depot

HPNSATRAP-MIB

Registered at
1.3.6.1.4.1.16
1.3.6.1.4.1.795
Namespace
hp
Source file
HPNSATRAP-MIB
Digest
sha256:b8701b9b30c9f793efe83253e4fcfb84e935e62fadfefdd8bab322c9fec76de5

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPNSATRAP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hp
OBJECT-IDENTITY
1.3.6.1.4.1.11
nm
OBJECT-IDENTITY
1.3.6.1.4.1.11.2
hpnsa
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23
hpnsaECC
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23.6
hpnsaRemoteAssist
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.23.8
hpnr
OBJECT-IDENTITY
1.3.6.1.4.1.16
hpNetRAID
OBJECT-IDENTITY
1.3.6.1.4.1.16.1
hpNetRaidMib
OBJECT-IDENTITY
1.3.6.1.4.1.16.1.1
raidTraps
OBJECT-IDENTITY
1.3.6.1.4.1.16.1.1.200
rtAdapterNumber
OBJECT-TYPE
Adapter Number for which Trap is generated.
1.3.6.1.4.1.16.1.1.200.1001INTEGERread-onlymandatory
rtLogicalDriveNumber
OBJECT-TYPE
Logical Drive Number for which Trap is generated.
1.3.6.1.4.1.16.1.1.200.1002INTEGERread-onlymandatory
rtChannelNumber
OBJECT-TYPE
Channel Number on the Adapter for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1003INTEGERread-onlymandatory
rtTargetID
OBJECT-TYPE
Device ID of the Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1004INTEGERread-onlymandatory
rtOldDriveState
OBJECT-TYPE
Old State of Logical/Physical Drive, when a State Change Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1005DisplayStringread-onlymandatory
rtNewDriveState
OBJECT-TYPE
New State of Logical/Physical Drive, when a State Change Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1006DisplayStringread-onlymandatory
rtSenseKey
OBJECT-TYPE
Check Condition Sense-Key reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1007INTEGERread-onlymandatory
rtASC
OBJECT-TYPE
Check Condition Additional Sense Code (ASC) reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1008INTEGERread-onlymandatory
rtASCQ
OBJECT-TYPE
Check Condition Additional Sense Code Qualifier (ASCQ) reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1009INTEGERread-onlymandatory
rtDriveVendor
OBJECT-TYPE
Vendor Identification String from the SCSI Inquiry Data for the Drive.
1.3.6.1.4.1.16.1.1.200.1010DisplayStringread-onlymandatory
adaptec
OBJECT-IDENTITY
1.3.6.1.4.1.795
storagemanagement
OBJECT-IDENTITY
1.3.6.1.4.1.795.2
cyclone
OBJECT-IDENTITY
1.3.6.1.4.1.795.2.5
cycTraps
OBJECT-IDENTITY
1.3.6.1.4.1.795.2.5.9000
cycManagerID
OBJECT-TYPE
ASCII String description of SCSI Manager
1.3.6.1.4.1.795.2.5.9000.9001DisplayString (SIZE(1..16))read-onlymandatory
cycHostAdapterID
OBJECT-TYPE
ASCII String description of Hostadapter
1.3.6.1.4.1.795.2.5.9000.9002DisplayString (SIZE(1..16))read-onlymandatory
cycHostAdapterNumber
OBJECT-TYPE
The unique Hostadapter Number
1.3.6.1.4.1.795.2.5.9000.9003INTEGERread-onlymandatory
cycVendor
OBJECT-TYPE
This indicates the Name of the Vendor
1.3.6.1.4.1.795.2.5.9000.9004DisplayString (SIZE(1..8))read-onlymandatory
cycProduct
OBJECT-TYPE
This indicates the product information
1.3.6.1.4.1.795.2.5.9000.9005DisplayString (SIZE(1..16))read-onlymandatory
cycControllerModel
OBJECT-TYPE
The model of the associated controller e.g ATHENA, VIKING etc
1.3.6.1.4.1.795.2.5.9000.9006DisplayString (SIZE(1..32))read-onlymandatory
cycBusNumber
OBJECT-TYPE
The PCI Bus number
1.3.6.1.4.1.795.2.5.9000.9007INTEGERread-onlymandatory
cycChannelNumber
OBJECT-TYPE
Channel Number
1.3.6.1.4.1.795.2.5.9000.9008INTEGERread-onlymandatory
cycScsiTargetID
OBJECT-TYPE
SCSI Target ID
1.3.6.1.4.1.795.2.5.9000.9009INTEGERread-onlymandatory
cycLun
OBJECT-TYPE
The LUN of the device ID
1.3.6.1.4.1.795.2.5.9000.9010INTEGERread-onlymandatory
cycArrayName
OBJECT-TYPE
Array name
1.3.6.1.4.1.795.2.5.9000.9011DisplayString (SIZE(1..32))read-onlymandatory
cycMisCompares
OBJECT-TYPE
The number of miscompares in verify
1.3.6.1.4.1.795.2.5.9000.9012INTEGERread-onlymandatory
cycDriver
OBJECT-TYPE
The Driver version
1.3.6.1.4.1.795.2.5.9000.9013INTEGERread-onlymandatory
cycManager
OBJECT-TYPE
The CI/O Manager version
1.3.6.1.4.1.795.2.5.9000.9014INTEGERread-onlymandatory
cycOldArrayName
OBJECT-TYPE
Old Array name
1.3.6.1.4.1.795.2.5.9000.9015DisplayString (SIZE(1..32))read-onlymandatory
cycNewArrayName
OBJECT-TYPE
Changed Array name
1.3.6.1.4.1.795.2.5.9000.9016DisplayString (SIZE(1..32))read-onlymandatory
cycPriority
OBJECT-TYPE
The Priority of the operation
1.3.6.1.4.1.795.2.5.9000.9017INTEGERread-onlymandatory
cycSenseInfo
OBJECT-TYPE
The sense info of the PFA
1.3.6.1.4.1.795.2.5.9000.9018INTEGERread-onlymandatory
adaptecNm
OBJECT-IDENTITY
1.3.6.1.4.1.795.4
adaptecNmScsiStatus
OBJECT-IDENTITY
1.3.6.1.4.1.795.4.1

Notifications

NameOIDStatus
hpnsaStorageCapWarning
NOTIFICATION-TYPE
Volume Storage Capacity has exceeded the warning threshold level.
1.3.6.1.4.1.11.2.23.0.4096
hpnsaStorageCapMinor
NOTIFICATION-TYPE
Volume Storage Capacity has exceeded the minor threshold level.
1.3.6.1.4.1.11.2.23.0.4097
hpnsaStorageCapMajor
NOTIFICATION-TYPE
Volume Storage Capacity has exceeded the major threshold level.
1.3.6.1.4.1.11.2.23.0.4098
hpnsaPostError
NOTIFICATION-TYPE
Post Error has occurred.
1.3.6.1.4.1.11.2.23.0.4356
hpnsaDiskSysDefects
NOTIFICATION-TYPE
The Defect List Threshold has been exceeded.
1.3.6.1.4.1.11.2.23.0.8210
hpnsaDaCacheError
NOTIFICATION-TYPE
HPDA Controller: Cache Error
1.3.6.1.4.1.11.2.23.0.8609
hpnsaDaLogicalDriveTrap
NOTIFICATION-TYPE
HPDA Logical Drive: Critical
1.3.6.1.4.1.11.2.23.0.8625
hpnsaDaLogicalDriveNotAvailable
NOTIFICATION-TYPE
HPDA Logical Drive Not Available
1.3.6.1.4.1.11.2.23.0.8626
hpnsaDaHotSpareFailure
NOTIFICATION-TYPE
HPDA Hot Spare:Failed
1.3.6.1.4.1.11.2.23.0.8641
hpnsaDaHotSpareSuccess
NOTIFICATION-TYPE
HPDA Hot Spare Succeeded
1.3.6.1.4.1.11.2.23.0.8642
hpnsaDaHardDiskFailure
NOTIFICATION-TYPE
HPDA Hard Disk Failed
1.3.6.1.4.1.11.2.23.0.8657
hpnsaDaParityThresholdTrap
NOTIFICATION-TYPE
HPDA Threshold Exceeded: Parity
1.3.6.1.4.1.11.2.23.0.8673
hpnsaDaSoftErrorThresholdTrap
NOTIFICATION-TYPE
HPDA Threshold Exceeded: Soft Errors
1.3.6.1.4.1.11.2.23.0.8674
hpnsaDaHardwareThresholdTrap
NOTIFICATION-TYPE
HPDA Threshold Exceeded: Hardware Errors
1.3.6.1.4.1.11.2.23.0.8675
hpnsaDaMiscThresholdTrap
NOTIFICATION-TYPE
HPDA Threshold Exceeded: Miscellaneous Errors
1.3.6.1.4.1.11.2.23.0.8676
hpnsaDaControllerTrap
NOTIFICATION-TYPE
HPDA Controller: NVRAM Age
1.3.6.1.4.1.11.2.23.0.8677
hpnsaRPSAbnormalCondition
NOTIFICATION-TYPE
The Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure.
1.3.6.1.4.1.11.2.23.0.9101
hpnsaRPSACPowerSourceFailure
NOTIFICATION-TYPE
Indicates a failure with the AC power source that is connected to one of the redundant power supply units.
1.3.6.1.4.1.11.2.23.0.9103
hpnsaRPSPsuFailureDetected
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules is not in normal operating condition.
1.3.6.1.4.1.11.2.23.0.9105
hpnsaRPSDCShutdown
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules is in over temperature protection mode.
1.3.6.1.4.1.11.2.23.0.9106
hpnsaRPSPsuRemoved
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.0.9107
hpnsaRPSPsuInserted
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.0.9108
hpnsaRPSPowerRestored
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
1.3.6.1.4.1.11.2.23.0.9109
hpnsaRPSWarningExceeded
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
1.3.6.1.4.1.11.2.23.0.9110
hpnsaRPSEmergencyExceeded
NOTIFICATION-TYPE
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level.
1.3.6.1.4.1.11.2.23.0.9111
hpnsaTempMonitorError
NOTIFICATION-TYPE
Server temperature monitor cannot read temperature data.
1.3.6.1.4.1.11.2.23.0.12288
hpnsaTempTrapWarning
NOTIFICATION-TYPE
Server temperature has exceeded the warning temperature threshold.
1.3.6.1.4.1.11.2.23.0.12289
hpnsaTempTrapEmergency
NOTIFICATION-TYPE
Server temperature has exceeded the emergency temperature threshold.
1.3.6.1.4.1.11.2.23.0.12290
hpnsaNicReceiveErrors
NOTIFICATION-TYPE
The total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16385
hpnsaNicTransmitErrors
NOTIFICATION-TYPE
The total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16386
hpnsaNicAdapterReset
NOTIFICATION-TYPE
The total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16387
hpnsaNicAlignmentErrors
NOTIFICATION-TYPE
The total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16388
hpnsaNicGiantFrameErrors
NOTIFICATION-TYPE
The total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16389
hpnsaNicHardwareMismatch
NOTIFICATION-TYPE
The total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16390
hpnsaNicLateCollision
NOTIFICATION-TYPE
The total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.0.16391
hpnsaNicExcessiveCollision
NOTIFICATION-TYPE
The total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.0.16392
hpnsaNicCarrierSenseError
NOTIFICATION-TYPE
The total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16393
hpnsaNicDeferralError
NOTIFICATION-TYPE
The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.0.16394
hpnsaNicNoECBError
NOTIFICATION-TYPE
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16395
hpnsaNicReceiveOverflow
NOTIFICATION-TYPE
The total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16396
hpnsaNicUtilCount
NOTIFICATION-TYPE
LAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16397
hpnsaNicAdapterMismatch
NOTIFICATION-TYPE
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
1.3.6.1.4.1.11.2.23.0.16398
hpnsaNicTxFIFOUnderrun
NOTIFICATION-TYPE
There possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.0.16399
hpnsaNicTxTimeOut
NOTIFICATION-TYPE
The HP LAN adapter driver did not receive a transmit complete interrupt.
1.3.6.1.4.1.11.2.23.0.16400
hpnsaNicRxFIFOOverrun
NOTIFICATION-TYPE
There possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.0.16401
hpnsaNicRxFalseInterrupts
NOTIFICATION-TYPE
There is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present.
1.3.6.1.4.1.11.2.23.0.16402
hpnsaNicPagingError
NOTIFICATION-TYPE
There possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors.
1.3.6.1.4.1.11.2.23.0.16403
hpnsaNicTimedOutDMA
NOTIFICATION-TYPE
There possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet.
1.3.6.1.4.1.11.2.23.0.16404
hpnsaNicTxNoResources
NOTIFICATION-TYPE
The HP LAN adapter is transmitting faster than the media can handle.
1.3.6.1.4.1.11.2.23.0.16405
hpnsaNicTxExcessiveFrags
NOTIFICATION-TYPE
The number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter.
1.3.6.1.4.1.11.2.23.0.16406
hpnsaNicRxLow
NOTIFICATION-TYPE
The total number of errors due to requests of an ECB being denied has exceeded the threshold.
1.3.6.1.4.1.11.2.23.0.16407
hpnsaNicRxEmpty
NOTIFICATION-TYPE
There possibly is a problem with your HP LAN adapter running in bus master mode.
1.3.6.1.4.1.11.2.23.0.16408
hpnsaParityError
NOTIFICATION-TYPE
Parity error has been detected in parity memory
1.3.6.1.4.1.11.2.23.0.20528
hpnsaBusTimeoutError
NOTIFICATION-TYPE
One of the bus masters caused a bus timeout
1.3.6.1.4.1.11.2.23.0.20544
hpnsaIOChannelCheck
NOTIFICATION-TYPE
I/0 channel check activated by device in EISA slot caused an error
1.3.6.1.4.1.11.2.23.0.20560
hpnsaSoftwareNMI
NOTIFICATION-TYPE
Software NMI has been generated
1.3.6.1.4.1.11.2.23.0.20576
hpnsaPostMemoryResize
NOTIFICATION-TYPE
Memory size has been adjusted during the Power-On-Self-Test during the last boot
1.3.6.1.4.1.11.2.23.0.20592
hpnsaPciParityError
NOTIFICATION-TYPE
Parity error has occurred on a transfer to/from a device on one of the PCI buses
1.3.6.1.4.1.11.2.23.0.20624
hpnsaPciSystemError
NOTIFICATION-TYPE
System error has occurred in the PCI subsystem
1.3.6.1.4.1.11.2.23.0.20640
hpnsaCPUFailure
NOTIFICATION-TYPE
One or more CPUs have failed. Detected by BIOS during POST
1.3.6.1.4.1.11.2.23.0.20656
hpnsaFailsafeTimeout
NOTIFICATION-TYPE
Timeout of failsafe timer has occurred
1.3.6.1.4.1.11.2.23.0.20672
hpnsaErrorLoggingDisabled
NOTIFICATION-TYPE
Error logging for a specific error has been disabled due to too many errors of that kind in a short time period
1.3.6.1.4.1.11.2.23.0.20704
hpnsaSystemWarning
NOTIFICATION-TYPE
An event of warning severity has occurred in the system. For example, chassis door has been opened
1.3.6.1.4.1.11.2.23.0.20736
hpnsaSystemCritical
NOTIFICATION-TYPE
An event of critical severity has occurred in the system. For example, both system fans have failed
1.3.6.1.4.1.11.2.23.0.20737
hpnsaVoltEmergency
NOTIFICATION-TYPE
Fatal voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU
1.3.6.1.4.1.11.2.23.0.20738
hpnsaVoltWarning
NOTIFICATION-TYPE
Warning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU
1.3.6.1.4.1.11.2.23.0.20739
hpnsaASRServerRestart
NOTIFICATION-TYPE
Server has been restarted after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.0.20752
hpnsaSystemReconfig
NOTIFICATION-TYPE
EISA Configuration Utility has altered system configuration
1.3.6.1.4.1.11.2.23.0.20800
hpnsaHotSwapTempMonitorError
NOTIFICATION-TYPE
Hot Swap Cage: Temperature monitor error occurred
1.3.6.1.4.1.11.2.23.0.24449
hpnsaHotSwapTempWarning
NOTIFICATION-TYPE
Hot Swap Cage: Warning temperature exceeded
1.3.6.1.4.1.11.2.23.0.24451
hpnsaHotSwapTempEmergency
NOTIFICATION-TYPE
Hot Swap Cage: Emergency temperature exceeded!
1.3.6.1.4.1.11.2.23.0.24452
hpnsaHotSwapPowerFailure
NOTIFICATION-TYPE
Power connection failure in one of the devices in the hot swap cage
1.3.6.1.4.1.11.2.23.0.24453
hpnsaHotSwapDeviceRemoved
NOTIFICATION-TYPE
A device has been removed from the hot swap cage
1.3.6.1.4.1.11.2.23.0.24454
hpnsaHotSwapDeviceInserted
NOTIFICATION-TYPE
A device has been inserted into the hot swap cage
1.3.6.1.4.1.11.2.23.0.24455
hpnsaEccErrorCorrected
NOTIFICATION-TYPE
An ECC single-bit error has been corrected in one of the memory modules
1.3.6.1.4.1.11.2.23.6.0.4353
hpnsaEccSBEOverflow
NOTIFICATION-TYPE
Error logging for ECC single-bit errors has been disabled due to too many SBE's detected in a short time period
1.3.6.1.4.1.11.2.23.6.0.4354
hpnsaEccMemoryResize
NOTIFICATION-TYPE
ECC Memory size has been adjusted during the Power-On-Self-Test during the last boot due to a failed memory module
1.3.6.1.4.1.11.2.23.6.0.4355
hpnsaEccMultiBitError
NOTIFICATION-TYPE
An ECC double-bit error has occurred in one of the memory modules
1.3.6.1.4.1.11.2.23.6.0.4357
hpnsaEccMultiBitErrorOverflow
NOTIFICATION-TYPE
Error logging for ECC multiple-bit errors has been disabled due to too many MBE's detected in a short time period
1.3.6.1.4.1.11.2.23.6.0.4358
hpnsaRAVoltServerPowerFailure
NOTIFICATION-TYPE
The server has lost the power completely.
1.3.6.1.4.1.11.2.23.8.0.109
hpnsaRAVoltMinus12VUpper
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of -12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.0.111
hpnsaRAVoltPlus3VUpper
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +3.3V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.0.113
hpnsaRAVoltPlus5VUpper
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +5V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.0.114
hpnsaRAVoltPlus12VUpper
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.0.115
hpnsaRAVoltMinus12VLower
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of -12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.0.121
hpnsaRAVoltBatteryLower
NOTIFICATION-TYPE
The HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.0.122
hpnsaRAVoltPlus3VLower
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +3.3V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.0.123
hpnsaRAVoltPlus5VLower
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +5V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.0.124
hpnsaRAVoltPlus12VLower
NOTIFICATION-TYPE
Voltage measured in the server has gone outside of +12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.0.125
hpnsaRATempWarning
NOTIFICATION-TYPE
The server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold.
1.3.6.1.4.1.11.2.23.8.0.211
hpnsaRATempShutdown
NOTIFICATION-TYPE
The server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down.
1.3.6.1.4.1.11.2.23.8.0.221
hpnsaRATempCritical
NOTIFICATION-TYPE
The server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has been automatically shut down.
1.3.6.1.4.1.11.2.23.8.0.231
hpnsaRASuccessfulLogin
NOTIFICATION-TYPE
An administrator has logged in to the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.0.401
hpnsaRAIllegalLogin
NOTIFICATION-TYPE
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time.
1.3.6.1.4.1.11.2.23.8.0.402
hpnsaRALowBatteryCharge
NOTIFICATION-TYPE
The HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.0.403
hpnsaRABoardShutDown
NOTIFICATION-TYPE
The HP Remote Assistant Card has been shut down.
1.3.6.1.4.1.11.2.23.8.0.404
hpnsaRAAdminstratorLogout
NOTIFICATION-TYPE
An administrator disconnected from the HP Remote Assistant board.
1.3.6.1.4.1.11.2.23.8.0.405
hpnsaRAAdministratorAutologout
NOTIFICATION-TYPE
An administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes.
1.3.6.1.4.1.11.2.23.8.0.406
hpnsaRAAdministratorConnectionLost
NOTIFICATION-TYPE
An administrator has been prematurely disconnected from the Remote Assistant board.
1.3.6.1.4.1.11.2.23.8.0.407
hpnsaRAAdministratorDialbackFailed
NOTIFICATION-TYPE
An administrator failed to connect to the HP Remote Assistant board on a dialback
1.3.6.1.4.1.11.2.23.8.0.408
hpnsaRAASRHangNOS
NOTIFICATION-TYPE
ASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed).
1.3.6.1.4.1.11.2.23.8.0.501
hpnsaRAASRServerRestart
NOTIFICATION-TYPE
The HP Remote Assistant card has restarted the server due to the NOS being hung.
1.3.6.1.4.1.11.2.23.8.0.502
hpnsaRAASRTimerEnabled
NOTIFICATION-TYPE
The Automatic Server Restart software has been enabled by the Remote Assistant ASR timer.
1.3.6.1.4.1.11.2.23.8.0.503
hpnsaRAASRTimerDisabled
NOTIFICATION-TYPE
The HP Remote Assistant Automatic Server Restart timer has been disabled.
1.3.6.1.4.1.11.2.23.8.0.504
hpnsaRARemoteInitiatedCtrlAltDel
NOTIFICATION-TYPE
An administrator has executed a remote <Ctrl-Alt-Del> on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.0.601
hpnsaRARemoteInitiatedReset
NOTIFICATION-TYPE
An administrator has executed a remote power cycle on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.0.602
hpnsaRARemoteInitiatedPowerDown
NOTIFICATION-TYPE
An administrator has executed a remote power down of the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.0.603
hpnsaRAInitServerBIOS
NOTIFICATION-TYPE
The server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process.
1.3.6.1.4.1.11.2.23.8.0.701
hpnsaRABusUtilization
NOTIFICATION-TYPE
The 5-minute average EISA bus utilization has exceeded the configured threshold.
1.3.6.1.4.1.11.2.23.8.0.800
hpnsaRATestNotification
NOTIFICATION-TYPE
An administrator has executed Test Page from the HP Remote Assistant Configuration Utility.
1.3.6.1.4.1.11.2.23.8.0.900
hpnsaRATAPNoConnect
NOTIFICATION-TYPE
The HP Remote Assistant modem was unable to connect to the TAP paging service modem.
1.3.6.1.4.1.11.2.23.8.0.901
hpnsaRATAPParam1Error
NOTIFICATION-TYPE
HP Remote Assistant was unable to connect with the TAP paging service.
1.3.6.1.4.1.11.2.23.8.0.902
hpnsaRATAPParam2Error
NOTIFICATION-TYPE
HP Remote Assistant was unable to log on to the TAP paging service.
1.3.6.1.4.1.11.2.23.8.0.903
hpnsaRATAPParam3Error
NOTIFICATION-TYPE
The HP Remote Assistant pager message was rejected by the TAP paging service.
1.3.6.1.4.1.11.2.23.8.0.904
rtConfigUpdated
NOTIFICATION-TYPE
Adapter-%d: A New Configuration has been written.
1.3.6.1.4.1.16.1.1.200.0.9001
rtPhysicalDriveStateChange
NOTIFICATION-TYPE
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
1.3.6.1.4.1.16.1.1.200.0.9002
rtLogicalDriveStateChange
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
1.3.6.1.4.1.16.1.1.200.0.9003
rtInitializeStarted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Initialization Started.
1.3.6.1.4.1.16.1.1.200.0.9004
rtInitializeCompleted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Initialization Completed Successfully.
1.3.6.1.4.1.16.1.1.200.0.9005
rtInitializeAborted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Initialization Aborted by User.
1.3.6.1.4.1.16.1.1.200.0.9006
rtInitializeFailed
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Initialization Failed.
1.3.6.1.4.1.16.1.1.200.0.9007
rtCheckConsistencyStarted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Check Consistency Started.
1.3.6.1.4.1.16.1.1.200.0.9008
rtCheckConsistencyCompleted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Check Consistency Completed. No Inconsistencies Found.
1.3.6.1.4.1.16.1.1.200.0.9009
rtCheckConsistencyAborted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Check Consistency Aborted by User.
1.3.6.1.4.1.16.1.1.200.0.9010
rtConsistencyCorrected
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Check Consistency Operation Completed. Inconsistencies have been Cured.
1.3.6.1.4.1.16.1.1.200.0.9011
rtCheckConsistencyFailed
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Check Consistency Failed.
1.3.6.1.4.1.16.1.1.200.0.9012
rtReconstructionStarted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Reconstruction Started.
1.3.6.1.4.1.16.1.1.200.0.9013
rtReconstructionCompleted
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Reconstruction Completed Successfully.
1.3.6.1.4.1.16.1.1.200.0.9014
rtReconstructionFailed
NOTIFICATION-TYPE
Adapter-%d, Logical Drive-%d: Reconstruction Failed.
1.3.6.1.4.1.16.1.1.200.0.9015
rtPredictiveFailuresFalse
NOTIFICATION-TYPE
Adapter-%d, Channel-%d, Target-%d: Reported Failure Prediction Threshold Exceeded [FALSE]. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x.
1.3.6.1.4.1.16.1.1.200.0.9016
rtPredictiveFailuresExceeded
NOTIFICATION-TYPE
Adapter-%d, Channel-%d, Target-%d: Reported Predictive Failure. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x.
1.3.6.1.4.1.16.1.1.200.0.9017
rtCheckConditionStatus
NOTIFICATION-TYPE
Adapter-%d, Channel-%d, Target-%d: Command Completed with Sense_Key-0x%x ASC-0x%x ASCQ-0x%x.
1.3.6.1.4.1.16.1.1.200.0.9018
rtNewDriveInserted
NOTIFICATION-TYPE
Adapter-%d, Channel-%d, Target-%d: New Device Inserted.
1.3.6.1.4.1.16.1.1.200.0.9019
rtBatteryMissing
NOTIFICATION-TYPE
Adapter-%d: Battery Module is missing.
1.3.6.1.4.1.16.1.1.200.0.9020
rtBatteryVolatageLow
NOTIFICATION-TYPE
Adapter-%d: Battery Module Voltage is Low.
1.3.6.1.4.1.16.1.1.200.0.9021
rtBatteryTemperatureHigh
NOTIFICATION-TYPE
Adapter-%d: Battery Module Temperature Exceeded Danger Threshold.
1.3.6.1.4.1.16.1.1.200.0.9022
cycSNMPAgentIsUp
NOTIFICATION-TYPE
SNMP Agent is up.
1.3.6.1.4.1.795.2.5.0.101
cycSNMPAgentIsDown
NOTIFICATION-TYPE
SNMP Agent is down.
1.3.6.1.4.1.795.2.5.0.102
cycDuplicateHostAdapter
NOTIFICATION-TYPE
Cyclone: duplicate hostadapter ID
1.3.6.1.4.1.795.2.5.0.107
cycHostAdapterDiscovered
NOTIFICATION-TYPE
The HostAdapter# %d with HostAdapter Id %s and Manager Id %s is discovered
1.3.6.1.4.1.795.2.5.0.108
cycHostAdapterChanged
NOTIFICATION-TYPE
The HostAdapter# %d has new HostAdapter Id %s and Manager Id %s
1.3.6.1.4.1.795.2.5.0.109
cycHostAdapterFailed
NOTIFICATION-TYPE
The HostAdapter# %d has Failed
1.3.6.1.4.1.795.2.5.0.110
cycHostAdapterRecovered
NOTIFICATION-TYPE
Host Adapter# %d recovered
1.3.6.1.4.1.795.2.5.0.111
cycDeviceFailed
NOTIFICATION-TYPE
The HostAdapter# %d , TargetID %d, Lun# %d has failed
1.3.6.1.4.1.795.2.5.0.112
cycDeviceDiscovered
NOTIFICATION-TYPE
The HostAdapter# %d , TargetID %d, Lun# %d of vendor %s product %s has discovered
1.3.6.1.4.1.795.2.5.0.113
cycDeviceRecovered
NOTIFICATION-TYPE
The HostAdapter# %d , TargetID %d, Lun# %d has recovered
1.3.6.1.4.1.795.2.5.0.114
cycDeviceChanged
NOTIFICATION-TYPE
The HostAdapter# %d , TargetID %d, Lun# %d has new Vendor %s and Product %s information
1.3.6.1.4.1.795.2.5.0.115
cycPredictiveFailure
NOTIFICATION-TYPE
The HostAdapter# %d , TargetID %d, Lun# %d has Predictive Failure Condition on vendor %s product %s with sense info MSB(sense code), next 8 bits(sense code Qual) next 8 bits (Add sense code Qual) LSB (0000) %d
1.3.6.1.4.1.795.2.5.0.116
cycAspiDatabaseCleared
NOTIFICATION-TYPE
The Aspi database is cleared and therefore all the previous information are not available
1.3.6.1.4.1.795.2.5.0.117
cycAspiCrash
NOTIFICATION-TYPE
The Aspi has crashed
1.3.6.1.4.1.795.2.5.0.118
cycAspiNoMemory
NOTIFICATION-TYPE
No memory left for Aspi Operations
1.3.6.1.4.1.795.2.5.0.119
cycAspiFileWriteOpenError
NOTIFICATION-TYPE
Unable to open Aspi file for writing, problem exists in server hard disk
1.3.6.1.4.1.795.2.5.0.120
cycAspiFileWriteError
NOTIFICATION-TYPE
Unable to open Aspi file , problem exists in server hard disk
1.3.6.1.4.1.795.2.5.0.121
cycAspiNoDeviceFile
NOTIFICATION-TYPE
Aspi device file doesnot exist
1.3.6.1.4.1.795.2.5.0.122
cycAspiNoMemoryReading
NOTIFICATION-TYPE
Aspi: Memory allocation is failing
1.3.6.1.4.1.795.2.5.0.123
cycAspiFileReadError
NOTIFICATION-TYPE
Aspi: unable to read the file server hard disk might have problems
1.3.6.1.4.1.795.2.5.0.124
cycAspiBadFileMagic
NOTIFICATION-TYPE
Aspi: database is corrupted
1.3.6.1.4.1.795.2.5.0.125
hpnsaScsiStatusCorruptedDB
NOTIFICATION-TYPE
Device Database has been corrupted.
1.3.6.1.4.1.795.4.1.0.8193
hpnsaScsiStatusUnloadedNLM
NOTIFICATION-TYPE
SCSI Status agent was unloaded from a NetWare Server.
1.3.6.1.4.1.795.4.1.0.8194
hpnsaScsiStatusFailedHBA
NOTIFICATION-TYPE
One of the SCSI HBAs can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.0.8196
hpnsaScsiStatusRecoveredHBA
NOTIFICATION-TYPE
A Host Adapter which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.0.8197
hpnsaScsiStatusDiscoveredHBA
NOTIFICATION-TYPE
A new SCSI Host Bus Adapter has been discovered or device database has been cleared.
1.3.6.1.4.1.795.4.1.0.8198
hpnsaScsiStatusDeviceFailed
NOTIFICATION-TYPE
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.0.8199
hpnsaScsiStatusDeviceRecovered
NOTIFICATION-TYPE
A SCSI device which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.0.8200
hpnsaScsiStatusDeviceDiscovered
NOTIFICATION-TYPE
A new SCSI device has been discovered.
1.3.6.1.4.1.795.4.1.0.8201
hpnsaScsiStatusChangedHBA
NOTIFICATION-TYPE
The SCSI Status agent detected that the Host Bus Adapter has been changed.
1.3.6.1.4.1.795.4.1.0.8205
hpnsaScsiStatusDeviceChanged
NOTIFICATION-TYPE
The SCSI Status agent detected that a SCSI device installed on the server has been changed.
1.3.6.1.4.1.795.4.1.0.8206
hpnsaScsiStatusTimeoutHBA
NOTIFICATION-TYPE
The SCSI Status agent sent a request to an HBA and the request never completed.
1.3.6.1.4.1.795.4.1.0.8208
hpnsaScsiStatusDeviceTimeout
NOTIFICATION-TYPE
The SCSI Status agent sent a request to a SCSI device and the request never completed.
1.3.6.1.4.1.795.4.1.0.8209