HPN-ICF-VOICE-IF-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.39.13
- Last updated
- 2007-12-10 17:00
- Revisions
- 2007-12-10 17:00
- Namespace
- hp
- Source file
HPN-ICF-VOICE-IF-MIB- Digest
sha256:43dfd2b13e22937bb5ec5111c3d2084e469c0abbba9344d4aa27687f76f636c1
Description
This MIB file is to provide the definition of the voice interface general configuration.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfVoice |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-OID-MIB HPN-ICF-VOICE-IF-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfVoiceIfObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1 | |||
| hpnicfVoiceIfConfigTable OBJECT-TYPE The table contains configurable parameters for both analog voice interface and digital voice interface. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1 | not-accessible | current | |
| hpnicfVoiceIfConfigEntry OBJECT-TYPE The entry of voice interface table. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1 | not-accessible | current | |
| hpnicfVoiceIfCfgCngOn OBJECT-TYPE This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpnicfVoiceIfCfgNonLinearSwitch OBJECT-TYPE This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpnicfVoiceIfCfgInputGain OBJECT-TYPE This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.3 | Integer32 (-140..139) | read-write | current |
| hpnicfVoiceIfCfgOutputGain OBJECT-TYPE This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.4 | Integer32 (-140..139) | read-write | current |
| hpnicfVoiceIfCfgEchoCancelSwitch OBJECT-TYPE This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpnicfVoiceIfCfgEchoCancelDelay OBJECT-TYPE This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hpnicfVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.6 | Integer32 (0..64) | read-write | current |
| hpnicfVoiceIfCfgTimerDialInterval OBJECT-TYPE The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7 | Integer32 (1..300) | read-write | current |
| hpnicfVoiceIfCfgTimerFirstDial OBJECT-TYPE The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.8 | Integer32 (1..300) | read-write | current |
| hpnicfVoiceIfCfgPrivateline OBJECT-TYPE This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.9 | DisplayString (SIZE(0..31)) | read-write | current |
| hpnicfVoiceIfCfgRegTone OBJECT-TYPE This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device. | 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.10 | OCTET STRING (SIZE(0 | 2..3)) | read-write | current |