HPN-ICF-USERLOG-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.8.18
- Last updated
- 2003-04-10 00:00
- Namespace
- hp
- Source file
HPN-ICF-USERLOG-MIB- Digest
sha256:10c38f5db8391132db0bd2f85a3723142a7f4b2a0528c78d1749501ae21b841e
Description
The HPN-ICF-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfRhw |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-OID-MIB HPN-ICF-USERLOG-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfUserlogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.1 | |||
| hpnicfUserlogNatObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1 | |||
| hpnicfUserlogNatVersion OBJECT-TYPE NAT LOG version. Currently only version 1 is developed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.1 | Integer32 | read-only | current |
| hpnicfUserlogNatSyslog OBJECT-TYPE NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.2 | Integer32 | read-write | current |
| hpnicfUserlogNatSourceIP OBJECT-TYPE The Source IP address of NAT LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.3 | IpAddress | read-write | current |
| hpnicfUserlogNatFlowBegin OBJECT-TYPE Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.4 | Integer32 | read-write | current |
| hpnicfUserlogNatActiveTime OBJECT-TYPE The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5 | Integer32 | read-write | current |
| hpnicfUserlogNatSlotCfgInfoTable OBJECT-TYPE A table of NAT LOG configuration information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6 | not-accessible | current | |
| hpnicfUserlogNatSlotCfgInfoEntry OBJECT-TYPE NAT LOG Configuration Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1 | not-accessible | current | |
| hpnicfUserlogNatCfgSlotNumber OBJECT-TYPE Slot number. Specify which slot is configured with NAT LOG. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogNatEnable OBJECT-TYPE The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.2 | Integer32 | read-write | current |
| hpnicfUserlogNatAclNumber OBJECT-TYPE Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.3 | Integer32 | read-write | current |
| hpnicfUserlogNatHostAddress OBJECT-TYPE The IP address of NAT LOG server. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.4 | IpAddress | read-write | current |
| hpnicfUserlogNatUdpPort OBJECT-TYPE The UDP Port Number of NAT LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.5 | Integer32 (0..65535) | read-write | current |
| hpnicfUserlogNatSlotRunInfoTable OBJECT-TYPE A table of NAT LOG running information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7 | not-accessible | current | |
| hpnicfUserlogNatSlotRunInfoEntry OBJECT-TYPE NAT LOG Running Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1 | not-accessible | current | |
| hpnicfUserlogNatRunSlotNumber OBJECT-TYPE Slot number. Specify on which slot the NAT LOG statistics displayed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogNatTotalEntries OBJECT-TYPE The total number of NAT flow entries which are logged. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.2 | Counter32 | read-only | current |
| hpnicfUserlogNatTotalPackets OBJECT-TYPE The total number of NAT LOG UDP packets generated by the router. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.3 | Counter32 | read-only | current |
| hpnicfUserlogNatFailedEntries OBJECT-TYPE The total number of NAT flow entries failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.4 | Counter32 | read-only | current |
| hpnicfUserlogNatFailedPackets OBJECT-TYPE The total number of NAT LOG UDP packets failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.5 | Counter32 | read-only | current |
| hpnicfUserlogNatClearRunStat OBJECT-TYPE Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.6 | Integer32 | read-write | current |
| hpnicfUserlogFlowObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2 | |||
| hpnicfUserlogFlowVersion OBJECT-TYPE BAS FLOW LOG version. Currently only version 1 is developed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.1 | Integer32 | read-only | current |
| hpnicfUserlogFlowSyslog OBJECT-TYPE BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.2 | Integer32 | read-write | current |
| hpnicfUserlogFlowSourceIP OBJECT-TYPE The Source IP address of BAS FLOW LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.3 | IpAddress | read-write | current |
| hpnicfUserlogFlowFlowBegin OBJECT-TYPE Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.4 | Integer32 | read-write | current |
| hpnicfUserlogFlowActiveTime OBJECT-TYPE The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.5 | Integer32 | read-write | current |
| hpnicfUserlogFlowSlotCfgInfoTable OBJECT-TYPE A table of BAS FLOW LOG configuration information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6 | not-accessible | current | |
| hpnicfUserlogFlowSlotCfgInfoEntry OBJECT-TYPE BAS FLOW LOG Configuration Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1 | not-accessible | current | |
| hpnicfUserlogFlowCfgSlotNumber OBJECT-TYPE Slot number. Specify which slot is configured with BAS FLOW LOG. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogFlowEnable OBJECT-TYPE The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.2 | Integer32 | read-write | current |
| hpnicfUserlogFlowAclNumber OBJECT-TYPE Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.3 | Integer32 | read-write | current |
| hpnicfUserlogFlowHostAddress OBJECT-TYPE The IP address of BAS FLOW LOG server. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.4 | IpAddress | read-write | current |
| hpnicfUserlogFlowUdpPort OBJECT-TYPE The UDP Port Number of BAS FLOW LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.5 | Integer32 (0..65535) | read-write | current |
| hpnicfUserlogFlowSlotRunInfoTable OBJECT-TYPE A table of BAS FLOW LOG running information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7 | not-accessible | current | |
| hpnicfUserlogFlowSlotRunInfoEntry OBJECT-TYPE Running Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1 | not-accessible | current | |
| hpnicfUserlogFlowRunSlotNumber OBJECT-TYPE Slot number. Specify on which slot the BAS FLOW LOG statistics displayed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogFlowTotalEntries OBJECT-TYPE The total number of BAS FLOW Entries which are logged. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.2 | Counter32 | read-only | current |
| hpnicfUserlogFlowTotalPackets OBJECT-TYPE The total number of FLOW LOG UDP packet generated by the router. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.3 | Counter32 | read-only | current |
| hpnicfUserlogFlowFailedEntries OBJECT-TYPE The total number of BAS FLOW entries failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.4 | Counter32 | read-only | current |
| hpnicfUserlogFlowFailedPackets OBJECT-TYPE The total number of BAS FLOW LOG UDP packet failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.5 | Counter32 | read-only | current |
| hpnicfUserlogFlowClearRunStat OBJECT-TYPE Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.6 | Integer32 | read-write | current |
| hpnicfUserlogAccessObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3 | |||
| hpnicfUserlogAccessVersion OBJECT-TYPE BAS ACCESS LOG version. Currently only version 1 is developed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.1 | Integer32 | read-only | current |
| hpnicfUserlogAccessSyslog OBJECT-TYPE BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.2 | Integer32 | read-write | current |
| hpnicfUserlogAccessSourceIP OBJECT-TYPE The Source IP address of BAS ACCESS LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.3 | IpAddress | read-write | current |
| hpnicfUserlogAccessSlotCfgInfoTable OBJECT-TYPE A table of BAS ACCESS LOG configuration information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4 | not-accessible | current | |
| hpnicfUserlogAccessSlotCfgInfoEntry OBJECT-TYPE BAS ACCESS LOG Configuration Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1 | not-accessible | current | |
| hpnicfUserlogAccessCfgSlotNumber OBJECT-TYPE Slot number. Specify which slot is configured with BAS ACCESS LOG. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogAccessEnable OBJECT-TYPE The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.2 | Integer32 | read-write | current |
| hpnicfUserlogAccessHostAddress OBJECT-TYPE The IP address of BAS ACCESS LOG server. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.3 | IpAddress | read-write | current |
| hpnicfUserlogAccessUdpPort OBJECT-TYPE The UDP Port Number of BAS ACCESS LOG UDP packet. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.4 | Integer32 (0..65535) | read-write | current |
| hpnicfUserlogAccessSlotRunInfoTable OBJECT-TYPE A table of BAS ACCESS LOG running information for the specified slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5 | not-accessible | current | |
| hpnicfUserlogAccessSlotRunInfoEntry OBJECT-TYPE Running Information Entry for a slot. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1 | not-accessible | current | |
| hpnicfUserlogAccessRunSlotNumber OBJECT-TYPE Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.1 | Integer32 (0..15) | read-only | current |
| hpnicfUserlogAccessTotalEntries OBJECT-TYPE The total number of BAS ACCESS Records which are logged. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.2 | Counter32 | read-only | current |
| hpnicfUserlogAccessTotalPackets OBJECT-TYPE The total number of ACCESS LOG UDP packet generated by the router. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.3 | Counter32 | read-only | current |
| hpnicfUserlogAccessFailedEntries OBJECT-TYPE The total number of BAS ACCESS entries failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.4 | Counter32 | read-only | current |
| hpnicfUserlogAccessFailedPackets OBJECT-TYPE The total number of BAS ACCESS LOG UDP packet failed in outputting. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.5 | Counter32 | read-only | current |
| hpnicfUserlogAccessClearRunStat OBJECT-TYPE Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid. | 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.6 | Integer32 | read-write | current |
| hpnicfUserlogNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.2 | |||
| hpnicfUserlogConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.3 | |||
| hpnicfUserlogCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.1 | |||
| hpnicfUserlogGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| hpnicfUserlogCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the Userlog mib. | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.1.1 | current |
| hpnicfUserlogMandatoryGroup OBJECT-GROUP A collection of objects providing mandatory Userlog information. | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.1 | current |
| hpnicfUserlogConfigGroup OBJECT-GROUP All configurable parameters of Userlog feature. | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.2 | current |
| hpnicfUserlogInfoGroup OBJECT-GROUP All running information of Userlog feature. | 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.3 | current |