HPN-ICF-TRANSCEIVER-INFO-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.70
- Last updated
- 2013-07-23 16:50
- Revisions
- 2013-07-23 16:50, 2009-12-29 16:50
- Namespace
- hp
- Source file
HPN-ICF-TRANSCEIVER-INFO-MIB- Digest
sha256:a44068d2317357f001964eaec6784473d097bd3871ced98b3d87e297a15e973e
Description
The objects in this MIB module are used to display the information of transceiver on interface.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-OID-MIB HPN-ICF-TRANSCEIVER-INFO-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfTransceiverInfoAdm OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.70.1 | |||
| hpnicfTransceiverInfoTable OBJECT-TYPE This table show the information of transceiver on interface. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1 | not-accessible | current | |
| hpnicfTransceiverInfoEntry OBJECT-TYPE The entry of the hpnicfTransceiverInfoTable. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1 | not-accessible | current | |
| hpnicfTransceiverHardwareType OBJECT-TYPE Hardware type of the interface, such as SM(single mode). | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1 | OCTET STRING | read-only | current |
| hpnicfTransceiverType OBJECT-TYPE Type of the interface, such as SFP/XFP/GBIC. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2 | OCTET STRING | read-only | current |
| hpnicfTransceiverWaveLength OBJECT-TYPE Wave length of the interface, measured in nanometer. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3 | Integer32 | read-only | current |
| hpnicfTransceiverVendorName OBJECT-TYPE Vendor name of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4 | OCTET STRING | read-only | current |
| hpnicfTransceiverSerialNumber OBJECT-TYPE Serial number of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5 | OCTET STRING | read-only | current |
| hpnicfTransceiverFiberDiameterType OBJECT-TYPE The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6 | INTEGER {fiber9(1), fiber50(2), fiber625(3), copper(4), unknown(65535)} | read-only | current |
| hpnicfTransceiverTransferDistance OBJECT-TYPE The maximal distance which the interface could transmit, measured in meter. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7 | Integer32 | read-only | current |
| hpnicfTransceiverDiagnostic OBJECT-TYPE Indicating the digital diagnostic monitoring function . | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8 | TruthValue | read-only | current |
| hpnicfTransceiverCurTXPower OBJECT-TYPE Indicating the current transmitted power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9 | Integer32 | read-only | current |
| hpnicfTransceiverMaxTXPower OBJECT-TYPE Indicating the maximal transmitted power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10 | Integer32 | read-only | current |
| hpnicfTransceiverMinTXPower OBJECT-TYPE Indicating the minimal transmitted power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11 | Integer32 | read-only | current |
| hpnicfTransceiverCurRXPower OBJECT-TYPE Indicating the current received power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12 | Integer32 | read-only | current |
| hpnicfTransceiverMaxRXPower OBJECT-TYPE Indicating the maximal received power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13 | Integer32 | read-only | current |
| hpnicfTransceiverMinRXPower OBJECT-TYPE Indicating the minimal received power . The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14 | Integer32 | read-only | current |
| hpnicfTransceiverTemperature OBJECT-TYPE Indicating the current temperature. The unit is Celsius centigrade. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15 | Integer32 | read-only | current |
| hpnicfTransceiverVoltage OBJECT-TYPE Indicating the current voltage . The unit is in hundredths of V | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16 | Integer32 | read-only | current |
| hpnicfTransceiverBiasCurrent OBJECT-TYPE Indicating the current bias electric current . The unit is in hundredths of mA | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17 | Integer32 | read-only | current |
| hpnicfTransceiverTempHiAlarm OBJECT-TYPE Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18 | Integer32 | read-only | current |
| hpnicfTransceiverTempLoAlarm OBJECT-TYPE Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19 | Integer32 | read-only | current |
| hpnicfTransceiverTempHiWarn OBJECT-TYPE Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20 | Integer32 | read-only | current |
| hpnicfTransceiverTempLoWarn OBJECT-TYPE Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21 | Integer32 | read-only | current |
| hpnicfTransceiverVccHiAlarm OBJECT-TYPE Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22 | Integer32 | read-only | current |
| hpnicfTransceiverVccLoAlarm OBJECT-TYPE Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23 | Integer32 | read-only | current |
| hpnicfTransceiverVccHiWarn OBJECT-TYPE Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24 | Integer32 | read-only | current |
| hpnicfTransceiverVccLoWarn OBJECT-TYPE Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25 | Integer32 | read-only | current |
| hpnicfTransceiverBiasHiAlarm OBJECT-TYPE Transceiver bias high alarm threshold limit in microamps. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26 | Integer32 | read-only | current |
| hpnicfTransceiverBiasLoAlarm OBJECT-TYPE Transceiver bias low alarm threshold limit in microamps. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27 | Integer32 | read-only | current |
| hpnicfTransceiverBiasHiWarn OBJECT-TYPE Transceiver bias high warning threshold limit in microamps. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28 | Integer32 | read-only | current |
| hpnicfTransceiverBiasLoWarn OBJECT-TYPE Transceiver bias low warning threshold limit in microamps. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29 | Integer32 | read-only | current |
| hpnicfTransceiverPwrOutHiAlarm OBJECT-TYPE Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30 | Integer32 | read-only | current |
| hpnicfTransceiverPwrOutLoAlarm OBJECT-TYPE Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31 | Integer32 | read-only | current |
| hpnicfTransceiverPwrOutHiWarn OBJECT-TYPE Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32 | Integer32 | read-only | current |
| hpnicfTransceiverPwrOutLoWarn OBJECT-TYPE Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33 | Integer32 | read-only | current |
| hpnicfTransceiverRcvPwrHiAlarm OBJECT-TYPE Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34 | Integer32 | read-only | current |
| hpnicfTransceiverRcvPwrLoAlarm OBJECT-TYPE Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35 | Integer32 | read-only | current |
| hpnicfTransceiverRcvPwrHiWarn OBJECT-TYPE Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36 | Integer32 | read-only | current |
| hpnicfTransceiverRcvPwrLoWarn OBJECT-TYPE Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37 | Integer32 | read-only | current |
| hpnicfTransceiverErrors OBJECT-TYPE Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31) | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38 | Bits {xcvrIOError(0), xcvrChecksum(1), xcvrTypeAndPortConfigMismatch(2), xcvrTypeNotSupported(3), wisLocalFault(4), rcvOpticalPowerFault(5), pmapmdReceiverLocalFault(6), pcsReceiveLocalFault(7), phyXSReceiveLocalFault(8), laserBiasCurrentFault(9), laserTemperatureFault(10), laserOutputPowerFault(11), txFault(12), pmapmdTransmitterLocalFault(13), pcsTransmitLocalFault(14), phyXSTransmitLocalFault(15), rxLossOfSignal(16)} | read-only | current |
| hpnicfTransceiverChannelTable OBJECT-TYPE This table provides statistics about transceiver with multi-channel. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2 | not-accessible | current | |
| hpnicfTransceiverChannelEntry OBJECT-TYPE The entry of the hpnicfTransceiverChannelTable. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1 | not-accessible | current | |
| hpnicfTransceiverChannelIndex OBJECT-TYPE The channel index of transceiver. Indicating one channel of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfTransceiverChannelCurTXPower OBJECT-TYPE Indicating the current transmission power. The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2 | Integer32 | read-only | current |
| hpnicfTransceiverChannelCurRXPower OBJECT-TYPE Indicating the current received power. The unit is in hundredths of dBM. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3 | Integer32 | read-only | current |
| hpnicfTransceiverChannelTemperature OBJECT-TYPE Indicating the current temperature. The unit is Celsius centigrade. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4 | Integer32 | read-only | current |
| hpnicfTransceiverChannelBiasCurrent OBJECT-TYPE Indicating the current bias electric current. The unit is in hundredths of mA. | 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5 | Integer32 | read-only | current |