HPN-ICF-QINQ-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.69
- Last updated
- 2006-03-10 00:00
- Revisions
- 2006-03-10 00:00
- Namespace
- hp
- Source file
HPN-ICF-QINQ-MIB- Digest
sha256:9f4c25f5629f33393c556c1c9112aafb9f2553a99142be0badec47b76b23bcea
Description
802.1Q-in-Q MIB
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-OID-MIB HPN-ICF-QINQ-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpnicfQinQSwitchState TEXTUAL-CONVENTION An enumerated value which indicates the state of switch. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfQinQMibObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.69.1 | |||
| hpnicfQinQGlobalConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1 | |||
| hpnicfQinQBpduTunnelSwitch OBJECT-TYPE The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding configuration of interface. BPDU tunnel function of a certain interface would work only if the global and interface's switch are both enabled. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1 | HpnicfQinQSwitchState | read-write | current |
| hpnicfQinQEthernetTypeValue OBJECT-TYPE Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface or VLAN. The node that configure this value for a single interface is hpnicfQinQIfEthernetType, whose priority is higher than hpnicfQinQEthernetTypeValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. The ethernet protocol type of node hpnicfQinQVidEthernetType that configured for a VLAN has the highest priority. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2 | Integer32 (1..65535) | read-write | current |
| hpnicfQinQServiceTPIDValue OBJECT-TYPE Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfServiceTPIDValue, whose priority is higher than hpnicfQinQServiceTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3 | Integer32 (1..65535) | read-write | current |
| hpnicfQinQCustomerTPIDValue OBJECT-TYPE Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfCustomerTPIDValue, whose priority is higher than hpnicfQinQCustomerTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4 | Integer32 (1..65535) | read-write | current |
| hpnicfQinQBpduTunnelTable OBJECT-TYPE A table for configuring 802.1q BPDU tunnel function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2 | not-accessible | current | |
| hpnicfQinQBpduTunnelEntry OBJECT-TYPE An entry for configuring 802.1q BPDU tunnel function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1 | not-accessible | current | |
| hpnicfQinQProtocolIndex OBJECT-TYPE The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP tunnel will start to work only if BPDU tunnel and STP/GMOSAIC/IGMP tunnel are both enabled. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1 | INTEGER {bpdu(1), stp(2), gmosaic(3), igmp(4)} | not-accessible | current |
| hpnicfQinQBpduRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2 | RowStatus | read-create | current |
| hpnicfQinQPriorityRemarkTable OBJECT-TYPE A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority of an outer VLAN tag. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3 | not-accessible | current | |
| hpnicfQinQPriorityRemarkEntry OBJECT-TYPE An entry for configuring priority remark function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1 | not-accessible | current | |
| hpnicfQinQPriorityValue OBJECT-TYPE The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1 | Integer32 (1..8) | not-accessible | current |
| hpnicfQinQPriorityRemarkValue OBJECT-TYPE The new priority value used to fill outer tag. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2 | Integer32 (0..7) | read-create | current |
| hpnicfQinQPriorityRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3 | RowStatus | read-create | current |
| hpnicfQinQVidTable OBJECT-TYPE A table for configuring VLAN ID of the 802.1Q-in-Q interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4 | not-accessible | current | |
| hpnicfQinQVidEntry OBJECT-TYPE An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1 | not-accessible | current | |
| hpnicfQinQVlanID OBJECT-TYPE VLAN ID | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1 | Integer32 (1..4094) | not-accessible | current |
| hpnicfQinQInboundVidListLow OBJECT-TYPE The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2 | OCTET STRING (SIZE(256)) | read-create | current |
| hpnicfQinQInboundVidListHigh OBJECT-TYPE The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3 | OCTET STRING (SIZE(256)) | read-create | current |
| hpnicfQinQVidEthernetType OBJECT-TYPE Ethernet protocol type configuring for a VLAN. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4 | Integer32 (1..65535) | read-create | current |
| hpnicfQinQVidRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5 | RowStatus | read-create | current |
| hpnicfQinQVidSwapTable OBJECT-TYPE A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5 | not-accessible | current | |
| hpnicfQinQVidSwapEntry OBJECT-TYPE An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1 | not-accessible | current | |
| hpnicfQinQVidSwapOld OBJECT-TYPE The old VLAN ID of original 802.1Q packets. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1 | Integer32 (1..4094) | not-accessible | current |
| hpnicfQinQVidSwapNew OBJECT-TYPE The new VLAN ID of original 802.1Q packets. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2 | Integer32 (1..4094) | read-create | current |
| hpnicfQinQVidSwapRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3 | RowStatus | read-create | current |
| hpnicfQinQPrioritySwapTable OBJECT-TYPE A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6 | not-accessible | current | |
| hpnicfQinQPrioritySwapEntry OBJECT-TYPE An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1 | not-accessible | current | |
| hpnicfQinQPrioritySwapOld OBJECT-TYPE The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1 | Integer32 (1..8) | not-accessible | current |
| hpnicfQinQPrioritySwapNew OBJECT-TYPE The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2 | Integer32 (0..7) | read-create | current |
| hpnicfQinQPrioritySwapRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3 | RowStatus | read-create | current |
| hpnicfQinQIfConfigTable OBJECT-TYPE A table for configuring 802.1Q-in-Q functions for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7 | not-accessible | current | |
| hpnicfQinQIfConfigEntry OBJECT-TYPE An entry for configuring 802.1Q-in-Q functions for interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1 | not-accessible | current | |
| hpnicfQinQIfEthernetType OBJECT-TYPE Ethernet protocol type configuring for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1 | Integer32 (1..65535) | read-create | current |
| hpnicfQinQIfSwitch OBJECT-TYPE Switch of 802.1Q-in-Q functions configuring for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2 | HpnicfQinQSwitchState | read-create | current |
| hpnicfQinQIfRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3 | RowStatus | read-create | current |
| hpnicfQinQIfServiceTPIDValue OBJECT-TYPE Service TPID value configured for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4 | Integer32 (1..65535) | read-create | current |
| hpnicfQinQIfCustomerTPIDValue OBJECT-TYPE Customer TPID value configured for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5 | Integer32 (1..65535) | read-create | current |
| hpnicfQinQIfUplinkSwitch OBJECT-TYPE Switch of the uplink 802.1Q-in-Q function for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6 | HpnicfQinQSwitchState | read-create | current |
| hpnicfQinQIfDownlinkSwitch OBJECT-TYPE Switch of the downlink 802.1Q-in-Q function for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7 | HpnicfQinQSwitchState | read-create | current |