MIBs Depot

HPN-ICF-PPP-OVER-SONET-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.19
Last updated
2013-10-10 17:00
Revisions
2013-10-10 17:00, 2010-05-19 17:00, 2007-07-19 17:00
Namespace
hp
Source file
HPN-ICF-PPP-OVER-SONET-MIB
Digest
sha256:d99864f33e41426e1de11ff1290cac086d61de620eee717896d0e812805eae5d

Description

This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicfCommon
IF-MIBifDescr, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-OID-MIB
HPN-ICF-PPP-OVER-SONET-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfPosMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.19.1
hpnicfPosParamTable
OBJECT-TYPE
The pos parameter table.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1not-accessiblecurrent
hpnicfPosParamTableEntry
OBJECT-TYPE
The entry of pos table.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1not-accessiblecurrent
hpnicfPosCRC
OBJECT-TYPE
The length of CRC
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.1INTEGER {crc32(1), crc16(2)}read-writecurrent
hpnicfPosMTU
OBJECT-TYPE
Maximum Transfer Unit (MTU) of POS interface
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.2Integer32read-writecurrent
hpnicfPosScramble
OBJECT-TYPE
Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.3TruthValueread-writecurrent
hpnicfPosClockSource
OBJECT-TYPE
The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.4INTEGER {system(1), line(2)}read-writecurrent
hpnicfPosSdhFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.5DisplayString (SIZE(0..15))read-writecurrent
hpnicfPosSdhFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.6DisplayString (SIZE(0..15))read-writecurrent
hpnicfPosSonetFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.7Integer32 (0..255)read-writecurrent
hpnicfPosSonetFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.8DisplayString (SIZE(0..62))read-writecurrent
hpnicfPosFlagC2
OBJECT-TYPE
The parameter for the channel signal value of C2 byte
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.9Integer32 (0..255)read-writecurrent
hpnicfPosFrameType
OBJECT-TYPE
The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.10INTEGER {sdh(1), sonet(2)}read-writecurrent
hpnicfPosBindVlanId
OBJECT-TYPE
The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.11Integer32 (0..4095)read-writecurrent
hpnicfPosEncapsulation
OBJECT-TYPE
The type of encapsulation
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.12INTEGER {ppp(1), hdlc(2), fr(3)}read-writecurrent
hpnicfPoskeepaliveTimeout
OBJECT-TYPE
The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13Integer32 (0..32767)read-writecurrent
hpnicfPosBERthresholdSF
OBJECT-TYPE
The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.14Integer32 (3..9)read-writecurrent
hpnicfPosBERthresholdSD
OBJECT-TYPE
The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.15Integer32 (3..9)read-writecurrent
hpnicfPosB1Error
OBJECT-TYPE
Counter for SBIPE(Section Bit Interleave Parity Error)
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.16Counter64read-onlycurrent
hpnicfPosB2Error
OBJECT-TYPE
Counter for LBIPE(Line Bit Interleave Parity Error)
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.17Counter64read-onlycurrent
hpnicfPosB3Error
OBJECT-TYPE
Counter for PBIPE(Path Bit Interleave Parity Error)
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.18Counter64read-onlycurrent
hpnicfPosM1Error
OBJECT-TYPE
How many times does LREI(Line Remote Error Indication) occur
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.19Counter64read-onlycurrent
hpnicfPosG1Error
OBJECT-TYPE
How many times does PREI(Path Remote Error Indication) occur
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.20Counter64read-onlycurrent
hpnicfPosFlagJ0Type
OBJECT-TYPE
The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.21INTEGER {sdh(1), sonet(2)}read-writecurrent
hpnicfPosFlagJ1Type
OBJECT-TYPE
The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.22INTEGER {sdh(1), sonet(2)}read-writecurrent
hpnicfPosB1TCAThreshold
OBJECT-TYPE
Threshold for B1 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.23Integer32 (3..9)read-writecurrent
hpnicfPosB2TCAThreshold
OBJECT-TYPE
Threshold for B2 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.24Integer32 (3..9)read-writecurrent
hpnicfPosB3TCAThreshold
OBJECT-TYPE
Threshold for B3 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.25Integer32 (3..9)read-writecurrent
hpnicfPosB1TCAEnable
OBJECT-TYPE
Enable traps of B1 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.26INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfPosB2TCAEnable
OBJECT-TYPE
Enable traps of B2 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.27INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfPosB3TCAEnable
OBJECT-TYPE
Enable traps of B3 TCA.
1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.28INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfPosMIBNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.19.2
hpnicfPosMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0

Notifications

NameOIDStatus
hpnicfPosLOSAlarm
NOTIFICATION-TYPE
Alarm indicates loss of signal
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.1current
hpnicfPosLOFAlarm
NOTIFICATION-TYPE
Alarm indicates loss of frame
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.2current
hpnicfPosOOFAlarm
NOTIFICATION-TYPE
Alarm indicates out of frame
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.3current
hpnicfPosLAISAlarm
NOTIFICATION-TYPE
Alarm when LAIS(Line Alarm Indication Signal) arrives
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.4current
hpnicfPosLRDIAlarm
NOTIFICATION-TYPE
Alarm when LRDI(Line Remote Defect Indication) arrives
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.5current
hpnicfPosPRDIAlarm
NOTIFICATION-TYPE
Alarm when PRDI(Path Remote Defect Indication) arrives
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.6current
hpnicfPosPAISAlarm
NOTIFICATION-TYPE
Alarm when PAIS(Path Alarm Indication Signal) arrives
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.7current
hpnicfPosLOPAlarm
NOTIFICATION-TYPE
Alarm indicates loss of pointer
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.8current
hpnicfPosSTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J0 bytes.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.9current
hpnicfPosPTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J1 bytes.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.10current
hpnicfPosPSLMAlarm
NOTIFICATION-TYPE
Alarm indicates a mismatched C2 byte.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.11current
hpnicfPosLSDAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SD threshold.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.12current
hpnicfPosLSFAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SF threshold.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.13current
hpnicfPosNormalAlarm
NOTIFICATION-TYPE
Alarm indicates that the Pos interface state returns normal.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.14current
hpnicfPosB1TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B1.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.15current
hpnicfPosB2TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B2.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.16current
hpnicfPosB3TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B3.
1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.17current