MIBs Depot

HPN-ICF-NQA-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.8.3
Last updated
2006-08-14 00:00
Namespace
hp
Source file
HPN-ICF-NQA-MIB
Digest
sha256:43f6295225f432edc4d59f1793005a9af4c24fd914e519a6149815a093c7b0d5

Description

The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.

Imports

FromSymbols
DISMAN-PING-MIBpingCtlDescr, pingCtlEntry, pingCtlOwnerIndex, pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlTestName, pingCtlType
HPN-ICF-OID-MIBhpnicfRhw
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DISMAN-PING-MIB
HPN-ICF-NQA-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfNqaObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.3.1
hpnicfNqaMIBVersion
OBJECT-TYPE
Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'
1.3.6.1.4.1.11.2.14.11.15.8.3.1.1DisplayStringread-onlycurrent
hpnicfNqaCtlTable
OBJECT-TYPE
Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2not-accessiblecurrent
hpnicfNqaCtlEntry
OBJECT-TYPE
Defines an entry in the hpnicfNqaCtlTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1not-accessiblecurrent
hpnicfNqaCtlTargetPort
OBJECT-TYPE
The destination port that may be used by udpEcho, tcpConnect and jitter probes.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.1Integer32 (0..65536)read-createcurrent
hpnicfNqaCtlSourcePort
OBJECT-TYPE
The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.2Integer32 (0..65536)read-createcurrent
hpnicfNqaCtlTTL
OBJECT-TYPE
Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.3Integer32read-createcurrent
hpnicfNqaCtlJitterAdminInterval
OBJECT-TYPE
Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.4Integer32 (0..60000)read-createcurrent
hpnicfNqaCtlJitterAdminNumPackets
OBJECT-TYPE
Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.5Integer32read-createcurrent
hpnicfNqaCtlHttpOperationType
OBJECT-TYPE
Http operation type: get, post or raw.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.6INTEGER {get(1), post(2), raw(3)}read-createcurrent
hpnicfNqaCtlHttpOperationString
OBJECT-TYPE
Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.7DisplayString (SIZE(0..1023))read-createcurrent
hpnicfNqaCtlFtpOperationType
OBJECT-TYPE
Ftp operation type.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.8INTEGER {get(1), put(2)}read-createcurrent
hpnicfNqaCtlFtpUsername
OBJECT-TYPE
Ftp username.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.9DisplayString (SIZE(0..32))read-createcurrent
hpnicfNqaCtlFtpPassword
OBJECT-TYPE
Ftp password.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.10DisplayString (SIZE(0..32))read-createcurrent
hpnicfNqaCtlFtpOperationString
OBJECT-TYPE
Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.11DisplayString (SIZE(0..255))read-createcurrent
hpnicfNqaCtlVPNInstance
OBJECT-TYPE
VPN name by which system finds route in the specified VPN to send NQA probe packets.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.12DisplayString (SIZE(0..255))read-createcurrent
hpnicfNqaCtlHistoryKeptTime
OBJECT-TYPE
To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.13Integer32 (1..1440)read-createcurrent
hpnicfNqaCtlHistoryEnable
OBJECT-TYPE
To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
hpnicfNqaCtlICPIFAdvFactor
OBJECT-TYPE
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. This is applicable only for the jitter probe. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.15Integer32read-createcurrent
hpnicfNqaCtlCodecType
OBJECT-TYPE
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.16INTEGER {notDefined(1), g711Alaw(2), g711Ulaw(3), g729A(4), icmpTimestamp(5)}read-createcurrent
hpnicfNqaResultsTable
OBJECT-TYPE
Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaResultsTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3not-accessiblecurrent
hpnicfNqaResultsEntry
OBJECT-TYPE
The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1not-accessiblecurrent
hpnicfNqaResultsRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1Unsigned32read-onlycurrent
hpnicfNqaResultsRttTimeouts
OBJECT-TYPE
The number of times that a NQA probe failed because the probe timed out.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2Unsigned32read-onlycurrent
hpnicfNqaResultsRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3Unsigned32read-onlycurrent
hpnicfNqaResultsRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4Unsigned32read-onlycurrent
hpnicfNqaResultsRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5Unsigned32read-onlycurrent
hpnicfNqaResultsRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6Unsigned32read-onlycurrent
hpnicfNqaResultsRttStatsErrors
OBJECT-TYPE
The number of some other errors.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7Unsigned32read-onlycurrent
hpnicfNqaResultsMaxDelaySD
OBJECT-TYPE
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8Unsigned32read-onlycurrent
hpnicfNqaResultsMaxDelayDS
OBJECT-TYPE
The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9Unsigned32read-onlycurrent
hpnicfNqaResultsLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10Unsigned32read-onlycurrent
hpnicfNqaResultsPacketLateArrival
OBJECT-TYPE
The value of this object indicates the number of the packets that arrived after the timeout.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11Unsigned32read-onlycurrent
hpnicfNqaResultsRttSum
OBJECT-TYPE
The sum of round trip time.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12Unsigned32read-onlycurrent
hpnicfNqaResultsNumOfDelaySD
OBJECT-TYPE
The number of delay from source to destination that are successfully measured.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13Unsigned32read-onlycurrent
hpnicfNqaResultsMinDelaySD
OBJECT-TYPE
The minimum of all one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14Unsigned32read-onlycurrent
hpnicfNqaResultsSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15Unsigned32read-onlycurrent
hpnicfNqaResultsSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16Unsigned32read-onlycurrent
hpnicfNqaResultsNumOfDelayDS
OBJECT-TYPE
The number of delay from destination to source that are successfully measured.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17Unsigned32read-onlycurrent
hpnicfNqaResultsMinDelayDS
OBJECT-TYPE
The minimum of all one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18Unsigned32read-onlycurrent
hpnicfNqaResultsSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19Unsigned32read-onlycurrent
hpnicfNqaResultsSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20Unsigned32read-onlycurrent
hpnicfNqaJitterStatsTable
OBJECT-TYPE
Statistics table for latest jitter activity.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4not-accessiblecurrent
hpnicfNqaJitterStatsEntry
OBJECT-TYPE
An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1not-accessiblecurrent
hpnicfNqaJitterStatsNumOfRTT
OBJECT-TYPE
The number of received destination device responses with which jitter test can reach round-trip time.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.1Counter32read-onlycurrent
hpnicfNqaJitterStatsMinOfPositivesSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.2Gauge32read-onlycurrent
hpnicfNqaJitterStatsMaxOfPositivesSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.3Gauge32read-onlycurrent
hpnicfNqaJitterStatsNumOfPositivesSD
OBJECT-TYPE
The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.4Gauge32read-onlycurrent
hpnicfNqaJitterStatsSumOfPositivesSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.5Gauge32read-onlycurrent
hpnicfNqaJitterStatsSum2PositivesSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.6Gauge32read-onlycurrent
hpnicfNqaJitterStatsMinOfNegativesSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.7Gauge32read-onlycurrent
hpnicfNqaJitterStatsMaxOfNegativesSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.8Gauge32read-onlycurrent
hpnicfNqaJitterStatsNumOfNegativesSD
OBJECT-TYPE
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.9Gauge32read-onlycurrent
hpnicfNqaJitterStatsSumOfNegativesSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.10Gauge32read-onlycurrent
hpnicfNqaJitterStatsSum2NegativesSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.11Gauge32read-onlycurrent
hpnicfNqaJitterStatsMinOfPositivesDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.12Gauge32read-onlycurrent
hpnicfNqaJitterStatsMaxOfPositivesDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.13Gauge32read-onlycurrent
hpnicfNqaJitterStatsNumOfPositivesDS
OBJECT-TYPE
The number that records positive jitter times from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.14Gauge32read-onlycurrent
hpnicfNqaJitterStatsSumOfPositivesDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.15Gauge32read-onlycurrent
hpnicfNqaJitterStatsSum2PositivesDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.16Gauge32read-onlycurrent
hpnicfNqaJitterStatsMinOfNegativesDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.17Gauge32read-onlycurrent
hpnicfNqaJitterStatsMaxOfNegativesDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.18Gauge32read-onlycurrent
hpnicfNqaJitterStatsNumOfNegativesDS
OBJECT-TYPE
The number that records negative jitter times from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.19Gauge32read-onlycurrent
hpnicfNqaJitterStatsSumOfNegativesDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.20Gauge32read-onlycurrent
hpnicfNqaJitterStatsSum2NegativesDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.21Gauge32read-onlycurrent
hpnicfNqaJitterStatsPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.22Gauge32read-onlycurrent
hpnicfNqaJitterStatsPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.23Gauge32read-onlycurrent
hpnicfNqaJitterStatsAvePositivesSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.24Gauge32read-onlycurrent
hpnicfNqaJitterStatsAveNegativesSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.25Gauge32read-onlycurrent
hpnicfNqaJitterStatsAvePositivesDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.26Gauge32read-onlycurrent
hpnicfNqaJitterStatsAveNegativesDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.27Gauge32read-onlycurrent
hpnicfNqaJitterStatsPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.28Gauge32read-onlycurrent
hpnicfNqaJitterStatsOperOfICPIF
OBJECT-TYPE
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.29Gauge32read-onlycurrent
hpnicfNqaJitterStatsOperOfMOS
OBJECT-TYPE
The MOS (Mean Opinion Score) value for the latest jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.30Gauge32read-onlycurrent
hpnicfNqaAgentEnable
OBJECT-TYPE
Enable NQA agent function.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfNqaTcpServerTable
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.6not-accessiblecurrent
hpnicfNqaTcpServerEntry
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1not-accessiblecurrent
hpnicfNqaTcpServerIpAddress
OBJECT-TYPE
Tcp server's ip address.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.1InetAddressnot-accessiblecurrent
hpnicfNqaTcpServerPort
OBJECT-TYPE
Tcp server's port number.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.2Integer32 (0..65536)not-accessiblecurrent
hpnicfNqaTcpServerRowStatus
OBJECT-TYPE
hpnicfNqaTcpServerIpAddress and hpnicfNqaTcpServerPort must be set during a creation operation.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.3RowStatusread-createcurrent
hpnicfNqaUdpServerTable
OBJECT-TYPE
Status of NQA udp server configuration information.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.7not-accessiblecurrent
hpnicfNqaUdpServerEntry
OBJECT-TYPE
This entry includes not only the udp server ip address but also the udp server udp port.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1not-accessiblecurrent
hpnicfNqaUdpServerIpAddress
OBJECT-TYPE
Udp server's ip address.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.1InetAddressnot-accessiblecurrent
hpnicfNqaUdpServerPort
OBJECT-TYPE
Udp server's port number.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.2Integer32 (0..65536)not-accessiblecurrent
hpnicfNqaUdpServerRowStatus
OBJECT-TYPE
hpnicfNqaUdpServerIpAddress and hpnicfNqaUdpServerPort must be set during a creation operation.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.3RowStatusread-createcurrent
hpnicfNqaServerEnable
OBJECT-TYPE
Enable NQA server function.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.8INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfNqaStatsMaxGroupNumber
OBJECT-TYPE
The maximum number saved per group. The maximum value of hpnicfNqaCtlStatisticsGroupNumber can not exceed the value of this object.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.9Integer32read-onlycurrent
hpnicfNqaStatisticsCtlTable
OBJECT-TYPE
Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaStatisticsResultsTable and the hpnicfNqaGroupStatsJitterTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10not-accessiblecurrent
hpnicfNqaStatisticsCtlEntry
OBJECT-TYPE
Defines an entry in the hpnicfNqaStatisticsCtlTable. The hpnicfNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsCtlTable to correspond to the pingCtlEntry.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1not-accessiblecurrent
hpnicfNqaCtlStatisticsInterval
OBJECT-TYPE
Statistic information will be calculated after the time that is the value of hpnicfNqaCtlStatisticsInterval.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.1Unsigned32read-createcurrent
hpnicfNqaCtlStatisticsGroupNumber
OBJECT-TYPE
The value of this object indicates the number of group saved. The length of this object is from 1 to hpnicfNqaStatsMaxGroupNumber.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.2Unsigned32read-createcurrent
hpnicfNqaCtlStatisticsKeptTime
OBJECT-TYPE
To indicate how long the statistic information will be saved after the test stops.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.3Unsigned32 (1..1440)read-createcurrent
hpnicfNqaCtlBeginTime
OBJECT-TYPE
Time at which the type-specified test will start.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.4DateAndTimeread-createcurrent
hpnicfNqaCtlLifeTime
OBJECT-TYPE
To indicate how long the type-specified test will last.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.5Unsigned32read-createcurrent
hpnicfNqaStatisticsResultsTable
OBJECT-TYPE
Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hpnicfNqaStatisticsResultsTable. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11not-accessiblecurrent
hpnicfNqaStatisticsResultsEntry
OBJECT-TYPE
Defines an entry in the hpnicfNqaStatisticsResultsTable. The hpnicfNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1not-accessiblecurrent
hpnicfNqaStatResIndex
OBJECT-TYPE
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
hpnicfNqaStatResIpTargetAddressType
OBJECT-TYPE
This object indicates the type of address stored in the corresponding hpnicfNqaStatResIpTargetAddress object.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2InetAddressTyperead-onlycurrent
hpnicfNqaStatResIpTargetAddress
OBJECT-TYPE
This object represent the host address to be used at a remote host for performing a network analysis operation.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3InetAddressread-onlycurrent
hpnicfNqaStatResMinRtt
OBJECT-TYPE
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4Gauge32read-onlycurrent
hpnicfNqaStatResMaxRtt
OBJECT-TYPE
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5Gauge32read-onlycurrent
hpnicfNqaStatResAverageRtt
OBJECT-TYPE
The average NQA probe round-trip-time (RTT).
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6Gauge32read-onlycurrent
hpnicfNqaStatResProbeResponses
OBJECT-TYPE
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7Counter32read-onlycurrent
hpnicfNqaStatResSentProbes
OBJECT-TYPE
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8Counter32read-onlycurrent
hpnicfNqaStatResRttSumOfSquares
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9Counter32read-onlycurrent
hpnicfNqaStatResStartTime
OBJECT-TYPE
This object contains the start time of the statistic.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10DateAndTimeread-onlycurrent
hpnicfNqaStatResInterval
OBJECT-TYPE
This object contains the interval between two times of statistic.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11Gauge32read-onlycurrent
hpnicfNqaStatResRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12Counter32read-onlycurrent
hpnicfNqaStatResRttTimeouts
OBJECT-TYPE
The number of times that a probe failed because the probe timed out.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13Counter32read-onlycurrent
hpnicfNqaStatResRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because errors related to sockets.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14Counter32read-onlycurrent
hpnicfNqaStatResRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15Counter32read-onlycurrent
hpnicfNqaStatResRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16Counter32read-onlycurrent
hpnicfNqaStatResRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17Counter32read-onlycurrent
hpnicfNqaStatResRttErrors
OBJECT-TYPE
The number of other errors.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18Counter32read-onlycurrent
hpnicfNqaStatResLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19Gauge32read-onlycurrent
hpnicfNqaStatResPacketLateArrival
OBJECT-TYPE
The value of this object reflects the number of the packets that arrived after the timeout.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20Counter32read-onlycurrent
hpnicfNqaStatResRttSum
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21Counter32read-onlycurrent
hpnicfNqaStatResNumOfDelaySD
OBJECT-TYPE
The number of one way times from source to destination that are successfully measured.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22Counter32read-onlycurrent
hpnicfNqaStatResMinDelaySD
OBJECT-TYPE
The minimum one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23Gauge32read-onlycurrent
hpnicfNqaStatResMaxDelaySD
OBJECT-TYPE
The maximum one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24Gauge32read-onlycurrent
hpnicfNqaStatResSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25Counter32read-onlycurrent
hpnicfNqaStatResSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26Counter32read-onlycurrent
hpnicfNqaStatResNumOfDelayDS
OBJECT-TYPE
The number of one way times from destination to source that are successfully measured.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27Counter32read-onlycurrent
hpnicfNqaStatResMinDelayDS
OBJECT-TYPE
The minimum one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28Gauge32read-onlycurrent
hpnicfNqaStatResMaxDelayDS
OBJECT-TYPE
The maximum one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29Gauge32read-onlycurrent
hpnicfNqaStatResSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30Counter32read-onlycurrent
hpnicfNqaStatResSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31Counter32read-onlycurrent
hpnicfNqaGroupStatsJitterTable
OBJECT-TYPE
Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12not-accessiblecurrent
hpnicfNqaGroupStatsJitterEntry
OBJECT-TYPE
An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1not-accessiblecurrent
hpnicfNqaStatJitterIndex
OBJECT-TYPE
An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hpnicfNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
hpnicfNqaStatJitterMinOfPosSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.2Gauge32read-onlycurrent
hpnicfNqaStatJitterMaxOfPosSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.3Gauge32read-onlycurrent
hpnicfNqaStatJitterNumOfPosSD
OBJECT-TYPE
The total number of positive jitters from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.4Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfPosSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.5Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfSquarePosSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.6Counter32read-onlycurrent
hpnicfNqaStatJitterMinOfNegSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.7Gauge32read-onlycurrent
hpnicfNqaStatJitterMaxOfNegSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.8Gauge32read-onlycurrent
hpnicfNqaStatJitterNumOfNegSD
OBJECT-TYPE
The total number of negative jitters from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.9Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfNegSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.10Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfSquareNegSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.11Counter32read-onlycurrent
hpnicfNqaStatJitterMinOfPosDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.12Gauge32read-onlycurrent
hpnicfNqaStatJitterMaxOfPosDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.13Gauge32read-onlycurrent
hpnicfNqaStatJitterNumOfPosDS
OBJECT-TYPE
The total number of positive jitters from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.14Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfPosDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.15Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfSquarePosDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.16Counter32read-onlycurrent
hpnicfNqaStatJitterMinOfNegDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.17Gauge32read-onlycurrent
hpnicfNqaStatJitterMaxOfNegDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.18Gauge32read-onlycurrent
hpnicfNqaStatJitterNumOfNegDS
OBJECT-TYPE
The total number of negative jitters from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.19Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfNegDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.20Counter32read-onlycurrent
hpnicfNqaStatJitterSumOfSquareNegDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.21Counter32read-onlycurrent
hpnicfNqaStatJitterPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.22Counter32read-onlycurrent
hpnicfNqaStatJitterPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.23Counter32read-onlycurrent
hpnicfNqaStatJitterAvePosSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.24Gauge32read-onlycurrent
hpnicfNqaStatJitterAveNegSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.25Gauge32read-onlycurrent
hpnicfNqaStatJitterAvePosDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.26Gauge32read-onlycurrent
hpnicfNqaStatJitterAveNegDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.27Gauge32read-onlycurrent
hpnicfNqaStatJitterPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.28Counter32read-onlycurrent
hpnicfNqaStatJitterMaxOfICPIF
OBJECT-TYPE
The maximum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.29Gauge32read-onlycurrent
hpnicfNqaStatJitterMinOfICPIF
OBJECT-TYPE
The minimum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.30Gauge32read-onlycurrent
hpnicfNqaStatJitterMaxOfMOS
OBJECT-TYPE
The maximum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.31Gauge32read-onlycurrent
hpnicfNqaStatJitterMinOfMOS
OBJECT-TYPE
The minimum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.32Gauge32read-onlycurrent
hpnicfNqaReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13not-accessiblecurrent
hpnicfNqaReactionEntry
OBJECT-TYPE
Defines an entry in the hpnicfNqaReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element selects a single reaction.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1not-accessiblecurrent
hpnicfNqaReactOwnerIndex
OBJECT-TYPE
The first index of hpnicfNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.1SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
hpnicfNqaReactTestName
OBJECT-TYPE
The second index of hpnicfNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.2SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
hpnicfNqaReactItemIndex
OBJECT-TYPE
The third index of hpnicfNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.3Unsigned32 (1..10)accessible-for-notifycurrent
hpnicfNqaReactCheckedElement
OBJECT-TYPE
A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hpnicfNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hpnicfNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.4INTEGER {probetime(1), probefailure(2), jitterrtt(3), jitterpacketloss(4), jittersd(5), jitterds(6), icpif(7), mos(8), jitterOwdSD(9), jitterOwdDS(10)}read-createcurrent
hpnicfNqaReactThresholdUpperLimit
OBJECT-TYPE
This object defines an administrative upper-threshold value for hpnicfNqaReactCheckedElement. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.5Unsigned32read-createcurrent
hpnicfNqaReactThresholdLowerLimit
OBJECT-TYPE
This object defines an administrative lower-threshold value for hpnicfNqaReactCheckedElement. The value of hpnicfNqaReactThresholdLowerLimit should be equal or less than the value of hpnicfNqaReactThresholdUpperLimit. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.6Unsigned32read-createcurrent
hpnicfNqaReactThresholdType
OBJECT-TYPE
This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hpnicfNqaReactThresholdConsecNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hpnicfNqaReactThresholdAccumNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.7INTEGER {invalid(0), average(1), consecutive(2), accumulative(3)}read-createcurrent
hpnicfNqaReactThresholdConsecNum
OBJECT-TYPE
This object defines a consecutive threshold limit. The value is zero when hpnicfNqaReactThresholdType is not 'consecutive'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.8Unsigned32read-createcurrent
hpnicfNqaReactThresholdAccumNum
OBJECT-TYPE
This object defines an accumulative threshold limit. The value is zero when the hpnicfNqaReactThresholdType is not 'accumulative'.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.9Unsigned32read-createcurrent
hpnicfNqaReactActionType
OBJECT-TYPE
Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.10INTEGER {none(0), trapOnly(1), triggerOnly(2), trapAndTrigger(3)}read-createcurrent
hpnicfNqaReactCurrentStatus
OBJECT-TYPE
Specifies the current status of this reaction entry: invalid - The status of the reaction entry is unknown. overThreshold - The status of the reaction entry is overThreshold when the monitored result exceeds the threshold value for the hpnicfNqaReactThresholdType. belowThreshold - The status of the reaction entry is belowThreshold when the monitored result is under the threshold value for the hpnicfNqaReactThresholdType.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.11INTEGER {invalid(1), overThreshold(2), belowThreshold(3)}read-onlycurrent
hpnicfNqaReactRowStatus
OBJECT-TYPE
This object allows entries to be created and deleted in the hpnicfNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.12RowStatusread-createcurrent
hpnicfNqaReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.13Unsigned32read-onlycurrent
hpnicfNqaReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.14Unsigned32read-onlycurrent
hpnicfNqaStatisticsReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14not-accessiblecurrent
hpnicfNqaStatisticsReactionEntry
OBJECT-TYPE
Defines an entry in the hpnicfNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element identifies an entry in the hpnicfNqaStatisticsResultsTable. The forth index element selects a single reaction.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1not-accessiblecurrent
hpnicfNqaStatReactOwnerIndex
OBJECT-TYPE
The first index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.1SnmpAdminString (SIZE(0..32))not-accessiblecurrent
hpnicfNqaStatReactTestName
OBJECT-TYPE
The second index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.2SnmpAdminString (SIZE(0..32))not-accessiblecurrent
hpnicfNqaStatReactIndex
OBJECT-TYPE
The third index of hpnicfNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.3Unsigned32not-accessiblecurrent
hpnicfNqaStatReactItemIndex
OBJECT-TYPE
The forth index of hpnicfNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.4Unsigned32not-accessiblecurrent
hpnicfNqaStatReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.5Counter32read-onlycurrent
hpnicfNqaStatReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.6Counter32read-onlycurrent
hpnicfNqaImplementationTypeDomains
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.3.2
hpnicfNqaUdpEcho
OBJECT-IDENTITY
Indicates that an implementation is using the UDP based echo server. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hpnicfNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.1current
hpnicfNqaTcpconnect
OBJECT-IDENTITY
Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hpnicfNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.2current
hpnicfNqajitter
OBJECT-IDENTITY
Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.3current
hpnicfNqaHttp
OBJECT-IDENTITY
Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.4current
hpnicfNqadlsw
OBJECT-IDENTITY
Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.5current
hpnicfNqadhcp
OBJECT-IDENTITY
Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.6current
hpnicfNqaftp
OBJECT-IDENTITY
Indicates that an implementation is using tcp packet for ftp connect and data transfer.
1.3.6.1.4.1.11.2.14.11.15.8.3.2.7current
hpnicfNqaNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.3.3

Notifications

NameOIDStatus
hpnicfNqaProbeTimeOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdConsecNum. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.1current
hpnicfNqaJitterRTTOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.2current
hpnicfNqaProbeFailure
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hpnicfNqaReactThresholdConsecNum in one test while the value of hpnicfNqaReactThresholdType is 'consecutive'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.3current
hpnicfNqaJitterPacketLoss
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.4current
hpnicfNqaJitterSDOverThreshold
NOTIFICATION-TYPE
The SD means the jitter values from source to destination. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.5current
hpnicfNqaJitterDSOverThreshold
NOTIFICATION-TYPE
The DS means the jitter values from destination to source. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.6current
hpnicfNqaICPIFOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.7current
hpnicfNqaMOSOverThreshold
NOTIFICATION-TYPE
It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.11.2.14.11.15.8.3.3.8current