HPN-ICF-MPLSOAM-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.79
- Last updated
- 2007-03-31 00:00
- Namespace
- hp
- Source file
HPN-ICF-MPLSOAM-MIB- Digest
sha256:0df076c403936ab6a00c7d17b71f59fe41c221bc77a0a89f6e32828496e5ee65
Description
This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-MPLSOAM-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpnicfMplsOAMDefectType TEXTUAL-CONVENTION An indication of the OAM's defect type: 1: dServer, server layer defect; 2: dPeerMe, peer network maintenance entity defect; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, receiving excess rate of CV/FFD; 7: dUnknown, unknown defect in the MPLS network.. 8: rlsn down; 9: dLspDown; 10: MPLS OAM ME; 11: no defect. | current | |||
| HpnicfMplsOAMDetectFreq TEXTUAL-CONVENTION An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ): For CV: the frequency is static. The value is 1/s. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms. Any other frequency is wrong. 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: 1000ms(only for cv). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfMplsOamScalarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.79.1 | |||
| hpnicfMplsOamCapability OBJECT-TYPE Whether OAM is globally capable. false: incapable; true: capable; The default value is incapable. | 1.3.6.1.4.1.11.2.14.11.15.2.79.1.1 | TruthValue | read-write | current |
| hpnicfMplsOamTrapOpen OBJECT-TYPE Whether OAM trap is globally enabled. false: disable; true: enable; The default value is disable. | 1.3.6.1.4.1.11.2.14.11.15.2.79.1.2 | TruthValue | read-write | current |
| hpnicfMplsOamTable OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.79.2 | |||
| hpnicfMplsOamIgrTable OBJECT-TYPE This table specifies per-LSP MPLS OAM ingress capability and associated information, such as IgrLspName and IgrDetType. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1 | not-accessible | current | |
| hpnicfMplsOamIgrEntry OBJECT-TYPE An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1 | not-accessible | current | |
| hpnicfMplsOamIgrIndex OBJECT-TYPE This is an unique index for an OAM ingress entry in the OAM table. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.1 | Unsigned32 | not-accessible | current |
| hpnicfMplsOamIgrLspName OBJECT-TYPE The name of an LSP. It means the LSP name of the detected LSP. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.2 | OCTET STRING | read-create | current |
| hpnicfMplsOamIgrDetectType OBJECT-TYPE There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.3 | INTEGER {cv(1), ffd(2)} | read-create | current |
| hpnicfMplsOamIgrDetectFreq OBJECT-TYPE Indication of the OAM's frequent type. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.4 | HpnicfMplsOAMDetectFreq | read-create | current |
| hpnicfMplsOamIgrRevType OBJECT-TYPE When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only by the oam ingress; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.5 | INTEGER {private(1), share(2)} | read-create | current |
| hpnicfMplsOamIgrRevLspName OBJECT-TYPE The object indicates the name of the reverse LSP. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.6 | OCTET STRING | read-create | current |
| hpnicfMplsOamIgrLspId OBJECT-TYPE For ingress, the object indicates the lsp ID of the detected LSP. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.7 | Integer32 | read-create | current |
| hpnicfMplsOamIgrEnable OBJECT-TYPE Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the ingress; true: The OAM function is enabled on the ingress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.8 | TruthValue | read-create | current |
| hpnicfMplsOamIgrDefectType OBJECT-TYPE Indication of the OAM's defect type. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.9 | HpnicfMplsOAMDefectType | read-only | current |
| hpnicfMplsOamIgrRowStatus OBJECT-TYPE This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType, hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName, and hpnicfMplsOamIgrLspId must be specified. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.10 | RowStatus | read-create | current |
| hpnicfMplsOamEgrTable OBJECT-TYPE This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2 | not-accessible | current | |
| hpnicfMplsOamEgrEntry OBJECT-TYPE An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1 | not-accessible | current | |
| hpnicfMplsOamEgrIndex OBJECT-TYPE This is a unique index for an OAM egress entry in the OAM table. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.1 | Unsigned32 | not-accessible | current |
| hpnicfMplsOamEgrLspName OBJECT-TYPE The object indicates the name of static LSP at egress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.2 | OCTET STRING | read-create | current |
| hpnicfMplsOamEgrDetectType OBJECT-TYPE There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.3 | INTEGER {cv(1), ffd(2)} | read-create | current |
| hpnicfMplsOamEgrDetectFreq OBJECT-TYPE Indication of the OAM's frequent type. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.4 | HpnicfMplsOAMDetectFreq | read-create | current |
| hpnicfMplsOamEgrRevType OBJECT-TYPE When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 1: private; 2: share. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.5 | INTEGER {private(1), share(2)} | read-create | current |
| hpnicfMplsOamEgrRevLspName OBJECT-TYPE The object indicates the name of a reverse static-lsp. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.6 | OCTET STRING | read-create | current |
| hpnicfMplsOamEgrLsrId OBJECT-TYPE The object indicates the Ingress LSR ID of the LSP. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.7 | IpAddress | read-create | current |
| hpnicfMplsOamEgrLspId OBJECT-TYPE The object indicates the the Ingress session lsp ID of the detected static-LSP. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.8 | Integer32 | read-create | current |
| hpnicfMplsOamEgrEnable OBJECT-TYPE Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the egress; true: The OAM function is enabled on the egress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.9 | TruthValue | read-create | current |
| hpnicfMplsOamEgrDefectType OBJECT-TYPE Indication of the OAM's defect type. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.10 | HpnicfMplsOAMDefectType | read-only | current |
| hpnicfMplsOamEgrRowStatus OBJECT-TYPE This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType, hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName, hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified. | 1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.11 | RowStatus | read-create | current |
| hpnicfMplsOamNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.79.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfMplsOamIgrLSPOutDefect NOTIFICATION-TYPE This notification is generated when the LSP is found out of the defect state at the LSP ingress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.3.1 | current |
| hpnicfMplsOamIgrLSPInDefect NOTIFICATION-TYPE This notification is generated when the LSP is found in the defect state at the LSP ingress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.3.2 | current |
| hpnicfMplsOamEgrLSPOutDefect NOTIFICATION-TYPE This notification is generated when the LSP is found out of the defect state at the LSP egress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.3.3 | current |
| hpnicfMplsOamEgrLSPInDefect NOTIFICATION-TYPE This notification is generated when the LSP is found in the defect state at the LSP egress. | 1.3.6.1.4.1.11.2.14.11.15.2.79.3.4 | current |