MIBs Depot

HPN-ICF-LswRSTP-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.8.35.6
Last updated
2001-06-29 00:00
Revisions
2001-06-29 00:00
Namespace
hp
Source file
HPN-ICF-LswRSTP-MIB
Digest
sha256:54da20e3de4a9919baa372e26db79d9676fee0b0fe5c51f63c38eea226e0bce8

Imports

FromSymbols
BRIDGE-MIBdot1dStpPort, dot1dStpPortEntry
HPN-ICF-OID-MIBhpnicflswCommon
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HPN-ICF-LswRSTP-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EnabledStatus
TEXTUAL-CONVENTION
A simple status value for the object.
current

Objects

NameOIDSyntaxAccessStatus
hpnicfLswRstpMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1
hpnicfRstpEventsV2
OBJECT-IDENTITY
Definition point for RSTP notifications.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0current
hpnicfdot1dStpStatus
OBJECT-TYPE
Bridge STP enabled/disabled state
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.1EnabledStatusread-writecurrent
hpnicfdot1dStpForceVersion
OBJECT-TYPE
Running mode of the bridge RSTP state machine
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.2INTEGER {stp(0), rstp(2)}read-writecurrent
hpnicfdot1dStpDiameter
OBJECT-TYPE
Permitted amount of bridges between any two ends on the network.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.3INTEGER (1..7)read-writecurrent
hpnicfdot1dStpRootBridgeAddress
OBJECT-TYPE
MAC address of the root bridge
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.4MacAddressread-onlycurrent
hpnicfdot1dStpPortXTable
OBJECT-TYPE
RSTP extended information of the port
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5not-accessiblecurrent
hpnicfdot1dStpPortXEntry
OBJECT-TYPE
RSTP extended information of the port
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1not-accessiblecurrent
hpnicfdot1dStpPortStatus
OBJECT-TYPE
RSTP status of the port
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1EnabledStatusread-writecurrent
hpnicfdot1dStpPortEdgeport
OBJECT-TYPE
Whether the port can be an edge port
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2TruthValueread-writecurrent
hpnicfdot1dStpPortPointToPoint
OBJECT-TYPE
It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hpnicfdot1dStpOperPortPointToPoint.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3INTEGER {forceTrue(1), forceFalse(2), auto(3)}read-writecurrent
hpnicfdot1dStpMcheck
OBJECT-TYPE
Check if the port transfer state machine enters
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4TruthValueread-writecurrent
hpnicfdot1dStpTransLimit
OBJECT-TYPE
Packet transmission limit of the bridge in a duration of Hello Time.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5INTEGER (1..255)read-writecurrent
hpnicfdot1dStpRXStpBPDU
OBJECT-TYPE
Number of STP BPDU received
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6Counter32read-onlycurrent
hpnicfdot1dStpTXStpBPDU
OBJECT-TYPE
Number of STP BPDU transmitted
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7Counter32read-onlycurrent
hpnicfdot1dStpRXTCNBPDU
OBJECT-TYPE
Number of TCN BPDU received
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8Counter32read-onlycurrent
hpnicfdot1dStpTXTCNBPDU
OBJECT-TYPE
Number of TCN BPDU transmitted
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9Counter32read-onlycurrent
hpnicfdot1dStpRXRSTPBPDU
OBJECT-TYPE
Number of RSTP BPDU received
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10Counter32read-onlycurrent
hpnicfdot1dStpTXRSTPBPDU
OBJECT-TYPE
Number of RSTP BPDU transmitted
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11Counter32read-onlycurrent
hpnicfdot1dStpClearStatistics
OBJECT-TYPE
Clear RSTP statistics. Read operation not supported.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12INTEGER {clear(1)}read-writecurrent
hpnicfdot1dSetStpDefaultPortCost
OBJECT-TYPE
Set PathCost back to the default setting. Read operation not supported.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13INTEGER {enable(1)}read-writecurrent
hpnicfdot1dStpRootGuard
OBJECT-TYPE
If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14EnabledStatusread-writecurrent
hpnicfdot1dStpLoopGuard
OBJECT-TYPE
Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15EnabledStatusread-writecurrent
hpnicfdot1dStpPortBlockedReason
OBJECT-TYPE
Record the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16INTEGER {notBlock(1), blockForProtocol(2), blockForRootGuard(3), blockForBPDUGuard(4), blockForLoopGuard(5)}read-onlycurrent
hpnicfdot1dStpRXTCBPDU
OBJECT-TYPE
The number of received TC BPDUs
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17Counter32read-onlycurrent
hpnicfdot1dStpPortSendingBPDUType
OBJECT-TYPE
Type of BPDU which the port is sending.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18INTEGER {stp(0), rstp(2)}read-onlycurrent
hpnicfdot1dStpOperPortPointToPoint
OBJECT-TYPE
This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hpnicfdot1dStpPortPointToPoint.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19INTEGER {true(1), false(2)}read-onlycurrent
hpnicfDot1dStpBpduGuard
OBJECT-TYPE
If BPDU guard enabled. The edge port will discard illegal BPDU when enabled
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.6EnabledStatusread-writecurrent
hpnicfDot1dStpRootType
OBJECT-TYPE
Root type of the bridge
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.7INTEGER {normal(1), primary(2), secondary(3)}read-writecurrent
hpnicfDot1dTimeOutFactor
OBJECT-TYPE
Time Out Factor of the bridge.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.8INTEGER (3..7)read-writecurrent
hpnicfDot1dStpPathCostStandard
OBJECT-TYPE
Path Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.9INTEGER {dot1d-1998(1), dot1t(2), legacy(3)}read-writecurrent
hpnicfdot1dStpIgnoredVlanTable
OBJECT-TYPE
RSTP extended information of vlan
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10not-accessiblecurrent
hpnicfdot1dStpIgnoredVlanEntry
OBJECT-TYPE
RSTP extended information of the vlan
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1not-accessiblecurrent
hpnicfdot1dVlan
OBJECT-TYPE
Vlan id supported
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.1INTEGER (1..4094)read-onlycurrent
hpnicfdot1dStpIgnore
OBJECT-TYPE
Whether the vlan is stp Ignored
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.2INTEGER {enable(1), disable(2)}read-writecurrent

Notifications

NameOIDStatus
hpnicfRstpBpduGuarded
NOTIFICATION-TYPE
The SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.1current
hpnicfRstpRootGuarded
NOTIFICATION-TYPE
The SNMP trap that is generated when a root-guard port receives a superior bpdu.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.2current
hpnicfRstpBridgeLostRootPrimary
NOTIFICATION-TYPE
The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge.
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.3current
hpnicfRstpLoopGuarded
NOTIFICATION-TYPE
The SNMP trap that is generated when a loop-guard port is aged out .
1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.4current