MIBs Depot

HPN-ICF-LswQos-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.8.35.16
Last updated
2002-11-19 00:00
Revisions
2002-11-19 00:00
Namespace
hp
Source file
HPN-ICF-LswQos-MIB
Digest
sha256:244722c02929949b4f8f33ef5e2fdb0834dfe50ecd15689fa2acaddbb9ff63b8

Description

Module node for qos and acl.

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicflswCommon
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-LswQos-MIB
HPN-ICF-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
HpnicfMirrorOrMonitorType
TEXTUAL-CONVENTION
Specify the mirror source or destination type. port(1): the mirror source or destination is port. board(2): the mirror source or destination is board.
current

Objects

NameOIDSyntaxAccessStatus
hpnicfLswQosMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2
hpnicfPriorityTrustMode
OBJECT-TYPE
Priority type of inbound queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.1INTEGER {default(0), dscp(1), ipprecedence(2), cos(3), localprecedence(4)}read-writecurrent
hpnicfPortMonitorBothIfIndex
OBJECT-TYPE
The ifIndex of in/out monitor port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.2INTEGERread-writecurrent
hpnicfQueueTable
OBJECT-TYPE
Queue table which contains queue entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3not-accessiblecurrent
hpnicfQueueEntry
OBJECT-TYPE
The configuration information of queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1not-accessiblecurrent
hpnicfQueueIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.1INTEGERread-onlycurrent
hpnicfQueueScheduleMode
OBJECT-TYPE
The mode of the queue schedule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.2INTEGER {sp(1), wrr(2), wrr-max-delay(3), sc-0(4), sc-1(5), sc-2(6), rr(7), wfq(8), hq-wrr(9)}read-writecurrent
hpnicfQueueWeight1
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hpnicfQueueWeight1 represent the weight of queue 1.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.3INTEGERread-writecurrent
hpnicfQueueWeight2
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hpnicfQueueWeight2 represent the weight of queue 2.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.4INTEGERread-writecurrent
hpnicfQueueWeight3
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hpnicfQueueWeight3 represent the weight of queue 3.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.5INTEGERread-writecurrent
hpnicfQueueWeight4
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hpnicfQueueWeight4 represent the weight of queue 4.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.6INTEGERread-writecurrent
hpnicfQueueMaxDelay
OBJECT-TYPE
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.7INTEGER (0..255)read-writecurrent
hpnicfQueueWeight5
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hpnicfQueueWeight5 represent the weight of queue 5.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.8INTEGERread-writecurrent
hpnicfQueueWeight6
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hpnicfQueueWeight6 represent the weight of queue 6.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.9INTEGERread-writecurrent
hpnicfQueueWeight7
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hpnicfQueueWeight7 represent the weight of queue 7.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.10INTEGERread-writecurrent
hpnicfQueueWeight8
OBJECT-TYPE
If queue mode is wfq, then hpnicfQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hpnicfQueueWeight8 represent the weight of queue 8.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.11INTEGERread-writecurrent
hpnicfRateLimitTable
OBJECT-TYPE
Rate limit table which contains limit entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4not-accessiblecurrent
hpnicfRateLimitEntry
OBJECT-TYPE
The configuration information of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1not-accessiblecurrent
hpnicfRateLimitAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.1INTEGER (0..2999)read-createcurrent
hpnicfRateLimitIfIndex
OBJECT-TYPE
ifIndex of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.2INTEGERread-createcurrent
hpnicfRateLimitVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.3INTEGER (0..4094)read-createcurrent
hpnicfRateLimitDirection
OBJECT-TYPE
Direction of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hpnicfRateLimitUserAclNum
OBJECT-TYPE
The number of user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfRateLimitUserAclRule
OBJECT-TYPE
The number of user acl-rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.6INTEGER (0..65535)read-createcurrent
hpnicfRateLimitIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfRateLimitIpAclRule
OBJECT-TYPE
The number of Ip acl-rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.8INTEGER (0..65535)read-createcurrent
hpnicfRateLimitLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfRateLimitLinkAclRule
OBJECT-TYPE
The number of link acl-rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.10INTEGER (0..65535)read-createcurrent
hpnicfRateLimitTargetRateMbps
OBJECT-TYPE
Target rate: Mbps.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.11INTEGERread-createcurrent
hpnicfRateLimitTargetRateKbps
OBJECT-TYPE
Target rate: Kbps.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.12INTEGERread-createcurrent
hpnicfRateLimitPeakRate
OBJECT-TYPE
Peak rate of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.13INTEGER (0 | 64..8388608)read-createcurrent
hpnicfRateLimitCIR
OBJECT-TYPE
CIR of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.14INTEGER (0..34120000)read-createcurrent
hpnicfRateLimitCBS
OBJECT-TYPE
Burst traffic of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.15INTEGER (0..1048575)read-createcurrent
hpnicfRateLimitEBS
OBJECT-TYPE
Excess burst traffic of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.16INTEGER (0..268435455)read-createcurrent
hpnicfRateLimitPIR
OBJECT-TYPE
PIR of the rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.17INTEGER (0..34120000)read-createcurrent
hpnicfRateLimitConformLocalPre
OBJECT-TYPE
Conform local pre.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.18INTEGERread-createcurrent
hpnicfRateLimitConformActionType
OBJECT-TYPE
Conform action type.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.19INTEGER {invalid(0), remark-cos(1), remark-drop-priority(2), remark-cos-drop-priority(3), remark-policed-service(4), remark-dscp(5)}read-createcurrent
hpnicfRateLimitExceedActionType
OBJECT-TYPE
Exceed action type.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.20INTEGER {invalid(0), forward(1), drop(2), remarkdscp(3), exceed-cos(4)}read-createcurrent
hpnicfRateLimitExceedDscp
OBJECT-TYPE
Exceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.21INTEGER (0..63 | 255)read-createcurrent
hpnicfRateLimitRuntime
OBJECT-TYPE
Runtime.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.22TruthValueread-onlycurrent
hpnicfRateLimitRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.23RowStatusread-createcurrent
hpnicfRateLimitExceedCos
OBJECT-TYPE
Exceeding COS of rate-limited port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.24INTEGERread-createcurrent
hpnicfRateLimitConformCos
OBJECT-TYPE
If the user choose remark-cos value of the hpnicfRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25INTEGER (0..7 | 255)read-createcurrent
hpnicfRateLimitConformDscp
OBJECT-TYPE
If the user choose remark-dscp value of the hpnicfRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.26INTEGER (0..63 | 255)read-createcurrent
hpnicfRateLimitMeterStatByteCount
OBJECT-TYPE
The counter of conform byte.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.27Counter64read-onlycurrent
hpnicfRateLimitMeterStatByteXCount
OBJECT-TYPE
The counter of exceed byte.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.28Counter64read-onlycurrent
hpnicfRateLimitMeterStatState
OBJECT-TYPE
The status of meter statistic.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.29INTEGER {set(1), unDo(2), reset(3), running(4), notRunning(5)}read-createcurrent
hpnicfPriorityTable
OBJECT-TYPE
The priority table which contains priority entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5not-accessiblecurrent
hpnicfPriorityEntry
OBJECT-TYPE
The configuration information of priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1not-accessiblecurrent
hpnicfPriorityAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.1INTEGER (0..2999)read-createcurrent
hpnicfPriorityIfIndex
OBJECT-TYPE
ifIndex of the port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.2INTEGERread-createcurrent
hpnicfPriorityVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.3INTEGER (0..4094)read-createcurrent
hpnicfPriorityDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hpnicfPriorityUserAclNum
OBJECT-TYPE
The number of user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfPriorityUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.6INTEGER (0..65535)read-createcurrent
hpnicfPriorityIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfPriorityIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.8INTEGER (0..65535)read-createcurrent
hpnicfPriorityLinkAclNum
OBJECT-TYPE
The number of Link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfPriorityLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.10INTEGER (0..65535)read-createcurrent
hpnicfPriorityDscp
OBJECT-TYPE
Set DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.11INTEGER (0..63 | 255)read-createcurrent
hpnicfPriorityIpPre
OBJECT-TYPE
Set Ip precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.12INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityIpPreFromCos
OBJECT-TYPE
Set Ip precedence according to vlan priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.13TruthValueread-createcurrent
hpnicfPriorityCos
OBJECT-TYPE
Set vlan priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.14INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityCosFromIpPre
OBJECT-TYPE
Set vlan priority according to IP precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.15TruthValueread-createcurrent
hpnicfPriorityLocalPre
OBJECT-TYPE
Set local precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.16INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityPolicedServiceType
OBJECT-TYPE
The service type of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.17INTEGER {invalid(0), auto(1), trust-dscp(2), new-dscp(3), untrusted(4)}read-createcurrent
hpnicfPriorityPolicedServiceDscp
OBJECT-TYPE
The service Dscp of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.18INTEGER (0..63 | 255)read-createcurrent
hpnicfPriorityPolicedServiceExp
OBJECT-TYPE
The service Exp of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.19INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityPolicedServiceCos
OBJECT-TYPE
The service COS of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.20INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityPolicedServiceLoaclPre
OBJECT-TYPE
The service local pre of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.21INTEGER (0..7 | 255)read-createcurrent
hpnicfPriorityPolicedServiceDropPriority
OBJECT-TYPE
The service drop priority of proliced Priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.22INTEGER (0..2 | 255)read-createcurrent
hpnicfPriorityRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.23TruthValueread-onlycurrent
hpnicfPriorityRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.24RowStatusread-createcurrent
hpnicfRedirectTable
OBJECT-TYPE
Redirect table which contains rediect entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6not-accessiblecurrent
hpnicfRedirectEntry
OBJECT-TYPE
Configuration information of redirection.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1not-accessiblecurrent
hpnicfRedirectAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.1INTEGER (0..2999)read-createcurrent
hpnicfRedirectIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.2INTEGERread-createcurrent
hpnicfRedirectVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.3INTEGER (0..4094)read-createcurrent
hpnicfRedirectDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hpnicfRedirectUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfRedirectUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.6INTEGER (0..65535)read-createcurrent
hpnicfRedirectIpAclNum
OBJECT-TYPE
The num of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfRedirectIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.8INTEGER (0..65535)read-createcurrent
hpnicfRedirectLinkAclNum
OBJECT-TYPE
The num of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfRedirectLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.10INTEGER (0..65535)read-createcurrent
hpnicfRedirectToCpu
OBJECT-TYPE
Redirect to cpu.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.11TruthValueread-createcurrent
hpnicfRedirectToIfIndex
OBJECT-TYPE
The ifIndex of port to be redirect to.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.12INTEGERread-createcurrent
hpnicfRedirectToNextHop1
OBJECT-TYPE
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.13IpAddressread-createcurrent
hpnicfRedirectToNextHop2
OBJECT-TYPE
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.14IpAddressread-createcurrent
hpnicfRedirectRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.15TruthValueread-onlycurrent
hpnicfRedirectRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.16RowStatusread-createcurrent
hpnicfRedirectToSlotNo
OBJECT-TYPE
The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.17INTEGER (1..16)read-createcurrent
hpnicfRedirectRemarkedDSCP
OBJECT-TYPE
DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.18INTEGER (0..63 | 255)read-createcurrent
hpnicfRedirectRemarkedPri
OBJECT-TYPE
The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.19INTEGER (0..7 | 255)read-createcurrent
hpnicfRedirectRemarkedTos
OBJECT-TYPE
The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.20INTEGER (0..15 | 255)read-createcurrent
hpnicfRedirectToNextHop3
OBJECT-TYPE
The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.21IpAddressread-createcurrent
hpnicfRedirectTargetVlanID
OBJECT-TYPE
The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.22INTEGER (0..4094)read-createcurrent
hpnicfRedirectMode
OBJECT-TYPE
The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.23INTEGER {strict-priority(1), load-balance(2)}read-createcurrent
hpnicfRedirectToNestedVlanID
OBJECT-TYPE
The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.24Integer32read-createcurrent
hpnicfRedirectToModifiedVlanID
OBJECT-TYPE
The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25Integer32read-createcurrent
hpnicfStatisticTable
OBJECT-TYPE
Statistic table which contains statistic entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7not-accessiblecurrent
hpnicfStatisticEntry
OBJECT-TYPE
Configuration about statistic information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1not-accessiblecurrent
hpnicfStatisticAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.1INTEGER (0..2999)read-createcurrent
hpnicfStatisticIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.2INTEGERread-createcurrent
hpnicfStatisticVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.3INTEGER (0..4094)read-createcurrent
hpnicfStatisticDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hpnicfStatisticUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfStatisticUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.6INTEGER (0..65535)read-createcurrent
hpnicfStatisticIpAclNum
OBJECT-TYPE
The number of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfStatisticIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.8INTEGER (0..65535)read-createcurrent
hpnicfStatisticLinkAclNum
OBJECT-TYPE
The number of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfStatisticLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.10INTEGER (0..65535)read-createcurrent
hpnicfStatisticRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.11TruthValueread-onlycurrent
hpnicfStatisticPacketCount
OBJECT-TYPE
The counter of the packets which is matched.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.12Counter64read-onlycurrent
hpnicfStatisticByteCount
OBJECT-TYPE
The counter of the byte which is matched.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.13Counter64read-onlycurrent
hpnicfStatisticCountClear
OBJECT-TYPE
Clear the counter of the packets.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.14INTEGER {cleared(1), nouse(2)}read-writecurrent
hpnicfStatisticRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.15RowStatusread-createcurrent
hpnicfStatisticPacketXCount
OBJECT-TYPE
The counter of the outprofile packets.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.16Counter64read-onlycurrent
hpnicfStatisticByteXCount
OBJECT-TYPE
The counter of the outprofile bytes.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.17Counter64read-onlycurrent
hpnicfMirrorTable
OBJECT-TYPE
Mirror table which contains mirror entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8not-accessiblecurrent
hpnicfMirrorEntry
OBJECT-TYPE
Configuration information to be mirrored.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1not-accessiblecurrent
hpnicfMirrorAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.1INTEGER (0..2999)read-createcurrent
hpnicfMirrorIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.2INTEGERread-createcurrent
hpnicfMirrorVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.3INTEGER (0..4094)read-createcurrent
hpnicfMirrorDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.4INTEGER {invalid(0), input(1), output(2)}read-createcurrent
hpnicfMirrorUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.5INTEGER (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfMirrorUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.6INTEGER (0..65535)read-createcurrent
hpnicfMirrorIpAclNum
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.7INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfMirrorIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.8INTEGER (0..65535)read-createcurrent
hpnicfMirrorLinkAclNum
OBJECT-TYPE
The number of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.9INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfMirrorLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.10INTEGER (0..65535)read-createcurrent
hpnicfMirrorToIfIndex
OBJECT-TYPE
The ifIndex of port that to be mirrored to.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.11INTEGERread-createcurrent
hpnicfMirrorToCpu
OBJECT-TYPE
Mirror to cpu.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.12TruthValueread-createcurrent
hpnicfMirrorRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.13TruthValueread-onlycurrent
hpnicfMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.14RowStatusread-createcurrent
hpnicfMirrorToGroup
OBJECT-TYPE
The destination of stream-based mirroring is the mirroring group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.15Integer32read-createcurrent
hpnicfPortMirrorTable
OBJECT-TYPE
Port Mirror.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9not-accessiblecurrent
hpnicfPortMirrorEntry
OBJECT-TYPE
Configuration information of port mirroring.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1not-accessiblecurrent
hpnicfPortMirrorIfIndex
OBJECT-TYPE
The ifIndex of mirror port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.1INTEGERread-createcurrent
hpnicfPortMirrorDirection
OBJECT-TYPE
The direction of mirror port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.2INTEGER {in(1), out(2), both(3)}read-createcurrent
hpnicfPortMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.3RowStatusread-createcurrent
hpnicfLineRateTable
OBJECT-TYPE
Line Rate.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10not-accessiblecurrent
hpnicfLineRateEntry
OBJECT-TYPE
Configuration information of line-rate port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1not-accessiblecurrent
hpnicfLineRateIfIndex
OBJECT-TYPE
The ifIndex of port of line rate.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.1INTEGERread-createcurrent
hpnicfLineRateDirection
OBJECT-TYPE
The direction of line rate.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.2INTEGER {in(1), out(2)}read-createcurrent
hpnicfLineRateValue
OBJECT-TYPE
The value of the line-rate.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.3INTEGERread-createcurrent
hpnicfLineRateRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.4RowStatusread-createcurrent
hpnicfBandwidthTable
OBJECT-TYPE
Bandwidth.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11not-accessiblecurrent
hpnicfBandwidthEntry
OBJECT-TYPE
Configuration information of bandwidth of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1not-accessiblecurrent
hpnicfBandwidthAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.1INTEGER (0..2999)read-createcurrent
hpnicfBandwidthIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.2INTEGERread-createcurrent
hpnicfBandwidthVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.3INTEGER (0..4094)read-createcurrent
hpnicfBandwidthDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.4INTEGER {invalid(0), output(2)}read-createcurrent
hpnicfBandwidthIpAclNum
OBJECT-TYPE
The number of Ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.5INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfBandwidthIpAclRule
OBJECT-TYPE
The subitem of ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.6INTEGER (0..65535)read-createcurrent
hpnicfBandwidthLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.7INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfBandwidthLinkAclRule
OBJECT-TYPE
The subitem of link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.8INTEGER (0..65535)read-createcurrent
hpnicfBandwidthMinGuaranteedWidth
OBJECT-TYPE
The min width which is guaranteed.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.9INTEGER (1..8388608)read-writecurrent
hpnicfBandwidthMaxGuaranteedWidth
OBJECT-TYPE
The max width which is guaranteed.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.10INTEGER (1..8388608)read-writecurrent
hpnicfBandwidthWeight
OBJECT-TYPE
Weight of bandwidth.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.11INTEGER (0..100)read-writecurrent
hpnicfBandwidthRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.12TruthValueread-onlycurrent
hpnicfBandwidthRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.13RowStatusread-writecurrent
hpnicfRedTable
OBJECT-TYPE
Red table which contains RED entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12not-accessiblecurrent
hpnicfRedEntry
OBJECT-TYPE
Configuration information of RED.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1not-accessiblecurrent
hpnicfRedAclIndex
OBJECT-TYPE
Index of acl rule.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.1INTEGER (0..2999)read-createcurrent
hpnicfRedIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.2INTEGERread-createcurrent
hpnicfRedVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.3INTEGER (0..4094)read-createcurrent
hpnicfRedDirection
OBJECT-TYPE
Direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.4INTEGER {invalid(0), output(2)}read-createcurrent
hpnicfRedIpAclNum
OBJECT-TYPE
The num of Ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.5INTEGER (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfRedIpAclRule
OBJECT-TYPE
The subitem of Ip acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.6INTEGER (0..65535)read-createcurrent
hpnicfRedLinkAclNum
OBJECT-TYPE
The number of link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.7INTEGER (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfRedLinkAclRule
OBJECT-TYPE
The subitem of link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.8INTEGER (0..65535)read-createcurrent
hpnicfRedStartQueueLen
OBJECT-TYPE
The length of Starting queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.9INTEGER (0..262128)read-writecurrent
hpnicfRedStopQueueLen
OBJECT-TYPE
The length of stopping queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.10INTEGER (0..262128)read-writecurrent
hpnicfRedProbability
OBJECT-TYPE
Probability.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.11INTEGER (0..100)read-writecurrent
hpnicfRedRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.12TruthValueread-onlycurrent
hpnicfRedRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.13RowStatusread-writecurrent
hpnicfMirrorGroupTable
OBJECT-TYPE
Mirror Group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13not-accessiblecurrent
hpnicfMirrorGroupEntry
OBJECT-TYPE
Configuration information of mirroring group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1not-accessiblecurrent
hpnicfMirrorGroupID
OBJECT-TYPE
Group ID of mirroring group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.1INTEGER (1..20)read-onlycurrent
hpnicfMirrorGroupDirection
OBJECT-TYPE
Direction of data stream which would be mirrored.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.2INTEGER {input(1), output(2)}read-writecurrent
hpnicfMirrorGroupMirrorIfIndexList
OBJECT-TYPE
ifIndex list of source port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.3OCTET STRING (SIZE(1..257))read-writecurrent
hpnicfMirrorGroupMonitorIfIndex
OBJECT-TYPE
ifIndex of destination port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.4INTEGERread-writecurrent
hpnicfMirrorGroupRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.5RowStatusread-writecurrent
hpnicfFlowtempTable
OBJECT-TYPE
Flow-template table which contains flow-template entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14not-accessiblecurrent
hpnicfFlowtempEntry
OBJECT-TYPE
Configuration information of flow-template.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1not-accessiblecurrent
hpnicfFlowtempIndex
OBJECT-TYPE
Index of flow template.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.1INTEGER {default(1), user-defined(2)}read-onlycurrent
hpnicfFlowtempIpProtocol
OBJECT-TYPE
protocol-type of IP packet.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.2TruthValueread-createcurrent
hpnicfFlowtempTcpFlag
OBJECT-TYPE
The flag of Tcp paceket.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.3TruthValueread-createcurrent
hpnicfFlowtempSPort
OBJECT-TYPE
The port of source.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.4TruthValueread-createcurrent
hpnicfFlowtempDPort
OBJECT-TYPE
The port of destination.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.5TruthValueread-createcurrent
hpnicfFlowtempIcmpType
OBJECT-TYPE
The type of Icmp.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.6TruthValueread-createcurrent
hpnicfFlowtempIcmpCode
OBJECT-TYPE
The code of Icmp.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.7TruthValueread-createcurrent
hpnicfFlowtempFragment
OBJECT-TYPE
The flag of Fragment.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.8TruthValueread-createcurrent
hpnicfFlowtempDscp
OBJECT-TYPE
Dscp of IP packet.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.9TruthValueread-createcurrent
hpnicfFlowtempIpPre
OBJECT-TYPE
The Precedence of Ip packet.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.10TruthValueread-createcurrent
hpnicfFlowtempTos
OBJECT-TYPE
Tos of IP packet.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.11TruthValueread-createcurrent
hpnicfFlowtempSIp
OBJECT-TYPE
The Ip of source.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.12TruthValueread-createcurrent
hpnicfFlowtempSIpMask
OBJECT-TYPE
The mask of source-Ip.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.13IpAddressread-createcurrent
hpnicfFlowtempDIp
OBJECT-TYPE
The Ip of destination.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.14TruthValueread-createcurrent
hpnicfFlowtempDIpMask
OBJECT-TYPE
The mask of destination-Ip.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.15IpAddressread-createcurrent
hpnicfFlowtempEthProtocol
OBJECT-TYPE
Protocol type of Ethernet.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.16TruthValueread-createcurrent
hpnicfFlowtempSMac
OBJECT-TYPE
The Mac of source.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.17TruthValueread-createcurrent
hpnicfFlowtempSMacMask
OBJECT-TYPE
The mask of source-Mac.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.18MacAddressread-createcurrent
hpnicfFlowtempDMac
OBJECT-TYPE
The mac of destination.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.19TruthValueread-createcurrent
hpnicfFlowtempDMacMask
OBJECT-TYPE
The mask of destination-Mac.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.20MacAddressread-createcurrent
hpnicfFlowtempVpn
OBJECT-TYPE
Vpn
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.21TruthValueread-createcurrent
hpnicfFlowtempRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.22RowStatusread-createcurrent
hpnicfFlowtempVlanId
OBJECT-TYPE
Source VLAN ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.23TruthValueread-createcurrent
hpnicfFlowtempCos
OBJECT-TYPE
802.1P priority.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.24TruthValueread-createcurrent
hpnicfFlowtempEnableTable
OBJECT-TYPE
The table of flow-template.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15not-accessiblecurrent
hpnicfFlowtempEnableEntry
OBJECT-TYPE
Enable entry of flow-template.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1not-accessiblecurrent
hpnicfFlowtempEnableIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.1INTEGERread-createcurrent
hpnicfFlowtempEnableVlanID
OBJECT-TYPE
Vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.2INTEGER (0..4094)read-createcurrent
hpnicfFlowtempEnableFlowtempIndex
OBJECT-TYPE
The index of Flowtemp table.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.3INTEGER {default(1), user-defined(2)}read-writecurrent
hpnicfTrafficShapeTable
OBJECT-TYPE
The traffic-shape table which contains traffic-shape entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16not-accessiblecurrent
hpnicfTrafficShapeEntry
OBJECT-TYPE
Configuration information of traffic-shape.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1not-accessiblecurrent
hpnicfTrafficShapeIfIndex
OBJECT-TYPE
IfIdex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.1INTEGERread-createcurrent
hpnicfTrafficShapeQueueId
OBJECT-TYPE
ID of queue which would be shaped.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.2INTEGER (0..7 | 255)read-createcurrent
hpnicfTrafficShapeMaxRate
OBJECT-TYPE
The max rate.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.3INTEGERread-createcurrent
hpnicfTrafficShapeBurstSize
OBJECT-TYPE
The size of burst.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.4INTEGERread-createcurrent
hpnicfTrafficShapeBufferLimit
OBJECT-TYPE
The limit of buffer.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.5INTEGER (0 | 16..8000)read-createcurrent
hpnicfTrafficShapeRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.6RowStatusread-createcurrent
hpnicfPortQueueTable
OBJECT-TYPE
The port-queue table which contains port-queue entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17not-accessiblecurrent
hpnicfPortQueueEntry
OBJECT-TYPE
Configuration information of port-queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1not-accessiblecurrent
hpnicfPortQueueIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.1INTEGERread-onlycurrent
hpnicfPortQueueQueueID
OBJECT-TYPE
ID of port-queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.2INTEGER (0..7)read-onlycurrent
hpnicfPortQueueWrrPriority
OBJECT-TYPE
The priority of Wrr.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.3INTEGER {sp(1), wrr-high-priority(2), wrr-low-priority(3)}read-writecurrent
hpnicfPortQueueWeight
OBJECT-TYPE
The weight of this queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.4INTEGER (0 | 1..255)read-writecurrent
hpnicfDropModeTable
OBJECT-TYPE
The drop-mode table which contains drop-mode entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18not-accessiblecurrent
hpnicfDropModeEntry
OBJECT-TYPE
Configuration information of the drop-mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1not-accessiblecurrent
hpnicfDropModeIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.1INTEGERread-onlycurrent
hpnicfDropModeMode
OBJECT-TYPE
Mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.2INTEGER {random-detect(1), tail-drop(2)}read-writecurrent
hpnicfDropModeWredIndex
OBJECT-TYPE
The index of Wred table.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.3INTEGER (0..3)read-writecurrent
hpnicfWredTable
OBJECT-TYPE
The Wred table which contains wred Entry.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19not-accessiblecurrent
hpnicfWredEntry
OBJECT-TYPE
Configuration information of Wred.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1not-accessiblecurrent
hpnicfWredIndex
OBJECT-TYPE
Index of wred.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.1INTEGER (0..3)read-onlycurrent
hpnicfWredQueueId
OBJECT-TYPE
Queue ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.2INTEGER (0..7)read-onlycurrent
hpnicfWredGreenMinThreshold
OBJECT-TYPE
The min threshold of Green.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.3INTEGER (0..65535)read-writecurrent
hpnicfWredGreenMaxThreshold
OBJECT-TYPE
The max threshold of Greem.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.4INTEGER (0..65535)read-writecurrent
hpnicfWredGreenMaxProb
OBJECT-TYPE
The max prob of Green.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.5INTEGER (1..15)read-writecurrent
hpnicfWredYellowMinThreshold
OBJECT-TYPE
The min threshold of Yellow.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.6INTEGER (0..65535)read-writecurrent
hpnicfWredYellowMaxThreshold
OBJECT-TYPE
The max threshold of Yellow.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.7INTEGER (0..65535)read-writecurrent
hpnicfWredYellowMaxProb
OBJECT-TYPE
The Prob threshold of Yellow.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.8INTEGER (1..15)read-writecurrent
hpnicfWredRedMinThreshold
OBJECT-TYPE
The min threshold of Red.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.9INTEGER (0..65535)read-writecurrent
hpnicfWredRedMaxThreshold
OBJECT-TYPE
The max threshold of Red.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.10INTEGER (0..65535)read-writecurrent
hpnicfWredRedMaxProb
OBJECT-TYPE
The max prob of Red.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.11INTEGER (1..15)read-writecurrent
hpnicfWredExponent
OBJECT-TYPE
Exponent.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.12INTEGER (1..15)read-writecurrent
hpnicfCosToLocalPrecedenceMapTable
OBJECT-TYPE
Table of map of the COS to local-precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20not-accessiblecurrent
hpnicfCosToLocalPrecedenceMapEntry
OBJECT-TYPE
Configuration information of map of the COS to local precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1not-accessiblecurrent
hpnicfCosToLocalPrecedenceMapCosIndex
OBJECT-TYPE
Index of the map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.1INTEGER (0..7)read-onlycurrent
hpnicfCosToLocalPrecedenceMapLocalPrecedenceValue
OBJECT-TYPE
Value of local precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.2INTEGER (0..7)read-writecurrent
hpnicfCosToDropPrecedenceMapTable
OBJECT-TYPE
The table of map of COS to drop-precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21not-accessiblecurrent
hpnicfCosToDropPrecedenceMapEntry
OBJECT-TYPE
Configuration information of the map of the COS to drop-precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1not-accessiblecurrent
hpnicfCosToDropPrecedenceMapCosIndex
OBJECT-TYPE
Index of the map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.1INTEGER (0..7)read-onlycurrent
hpnicfCosToDropPrecedenceMapDropPrecedenceValue
OBJECT-TYPE
Value of drop-precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.2INTEGER (0..2)read-writecurrent
hpnicfDscpMapTable
OBJECT-TYPE
Table of dscp map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22not-accessiblecurrent
hpnicfDscpMapEntry
OBJECT-TYPE
Configuration information of Dscp map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1not-accessiblecurrent
hpnicfDscpMapConformLevel
OBJECT-TYPE
Conformable level of Dscp-map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.1INTEGER (0..2)read-onlycurrent
hpnicfDscpMapDscpIndex
OBJECT-TYPE
Index of dscp.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.2INTEGER (0..63)read-onlycurrent
hpnicfDscpMapDscpValue
OBJECT-TYPE
Value of Dscp.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.3INTEGER (0..63)read-writecurrent
hpnicfDscpMapExpValue
OBJECT-TYPE
Exp value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.4INTEGER (0..7)read-writecurrent
hpnicfDscpMapCosValue
OBJECT-TYPE
COS value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.5INTEGER (0..7)read-writecurrent
hpnicfDscpMapLocalPrecedence
OBJECT-TYPE
The precedence of local.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.6INTEGER (0..7)read-writecurrent
hpnicfDscpMapDropPrecedence
OBJECT-TYPE
The precedence of Drop.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.7INTEGER (0..2)read-writecurrent
hpnicfExpMapTable
OBJECT-TYPE
The table of Exp-map
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23not-accessiblecurrent
hpnicfExpMapEntry
OBJECT-TYPE
Configuration information of Exp-map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1not-accessiblecurrent
hpnicfExpMapConformLevel
OBJECT-TYPE
Conformable level of Exp-map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.1INTEGER (0..2)read-onlycurrent
hpnicfExpMapExpIndex
OBJECT-TYPE
Index of Exp.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.2INTEGER (0..7)read-onlycurrent
hpnicfExpMapDscpValue
OBJECT-TYPE
Dscp value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.3INTEGER (0..63)read-writecurrent
hpnicfExpMapExpValue
OBJECT-TYPE
Exp value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.4INTEGER (0..7)read-writecurrent
hpnicfExpMapCosValue
OBJECT-TYPE
COS Value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.5INTEGER (0..7)read-writecurrent
hpnicfExpMapLocalPrecedence
OBJECT-TYPE
The precedence of local.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.6INTEGER (0..7)read-writecurrent
hpnicfExpMapDropPrecedence
OBJECT-TYPE
The precedence of Drop.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.7INTEGER (0..2)read-writecurrent
hpnicfLocalPrecedenceMapTable
OBJECT-TYPE
The table of local-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24not-accessiblecurrent
hpnicfLocalPrecedenceMapEntry
OBJECT-TYPE
Configuraion information of local-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1not-accessiblecurrent
hpnicfLocalPrecedenceMapConformLevel
OBJECT-TYPE
Conformable level of local-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.1INTEGER (0..2)read-onlycurrent
hpnicfLocalPrecedenceMapLocalPrecedenceIndex
OBJECT-TYPE
Index of local-precedence.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.2INTEGER (0..7)read-writecurrent
hpnicfLocalPrecedenceMapCosValue
OBJECT-TYPE
COS value.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.3INTEGER (0..7)read-writecurrent
hpnicfPortWredTable
OBJECT-TYPE
The table of PortWred.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25not-accessiblecurrent
hpnicfPortWredEntry
OBJECT-TYPE
Configuration information of port Wred.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1not-accessiblecurrent
hpnicfPortWredIfIndex
OBJECT-TYPE
ifIndex of port.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.1INTEGERread-onlycurrent
hpnicfPortWredQueueID
OBJECT-TYPE
ID of port-Wred queue.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.2INTEGER (0..7)read-onlycurrent
hpnicfPortWredQueueStartLength
OBJECT-TYPE
Queue length.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.3INTEGER (0..2047)read-writecurrent
hpnicfPortWredQueueProbability
OBJECT-TYPE
Probability.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.4INTEGER (0..100)read-writecurrent
hpnicfMirroringGroupTable
OBJECT-TYPE
The table of MirrorGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26not-accessiblecurrent
hpnicfMirroringGroupEntry
OBJECT-TYPE
Configuration information of MirrorGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1not-accessiblecurrent
hpnicfMirroringGroupID
OBJECT-TYPE
GroupID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.1INTEGER (1..20)not-accessiblecurrent
hpnicfMirroringGroupType
OBJECT-TYPE
GroupType.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.2INTEGER {local(1), remote-source(2), remote-destination(3)}read-createcurrent
hpnicfMirroringGroupStatus
OBJECT-TYPE
MirroringGroup status.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
hpnicfMirroringGroupRowStatus
OBJECT-TYPE
RowStatus, Now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.4RowStatusread-createcurrent
hpnicfMirroringGroupMirrorTable
OBJECT-TYPE
MirroringGroup mirroring-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27not-accessiblecurrent
hpnicfMirroringGroupMirrorEntry
OBJECT-TYPE
MirroringGroup mirroring-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1not-accessiblecurrent
hpnicfMirroringGroupMirrorInboundIfIndexList
OBJECT-TYPE
Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList. Example A: hpnicfMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hpnicfMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hpnicfMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hpnicfMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hpnicfMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HpnicfMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hpnicfMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hpnicfMirroringGroupMirrorInTypeList is not supported, the first four octets of hpnicfMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hpnicfMirroringGroupMirrorOutboundIfIndexList and hpnicfMirroringGroupMirrorOutTypeList are a pair and have the same relations like hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList pair.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.1OCTET STRINGread-createcurrent
hpnicfMirroringGroupMirrorOutboundIfIndexList
OBJECT-TYPE
Outbound-Mirror ifIndex and slot number list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.2OCTET STRINGread-createcurrent
hpnicfMirroringGroupMirrorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.3RowStatusread-createcurrent
hpnicfMirroringGroupMirrorInTypeList
OBJECT-TYPE
Inbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.4OCTET STRINGread-createcurrent
hpnicfMirroringGroupMirrorOutTypeList
OBJECT-TYPE
Outbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.5OCTET STRINGread-createcurrent
hpnicfMirroringGroupMonitorTable
OBJECT-TYPE
MirroringGroup monitor-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28not-accessiblecurrent
hpnicfMirroringGroupMonitorEntry
OBJECT-TYPE
MirroringGroup monitor-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1not-accessiblecurrent
hpnicfMirroringGroupMonitorIfIndex
OBJECT-TYPE
If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hpnicfMirroringGroupMonitorType.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.1INTEGERread-createcurrent
hpnicfMirroringGroupMonitorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.2RowStatusread-createcurrent
hpnicfMirroringGroupMonitorType
OBJECT-TYPE
Specify whether the monitor destination is port or board. If this object is not supported, then the value of hpnicfMirroringGroupMonitorIfIndex means ifIndex.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.3HpnicfMirrorOrMonitorTyperead-createcurrent
hpnicfMirroringGroupReflectorTable
OBJECT-TYPE
MirroringGroup reflector-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29not-accessiblecurrent
hpnicfMirroringGroupReflectorEntry
OBJECT-TYPE
MirroringGroup reflector-port information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1not-accessiblecurrent
hpnicfMirroringGroupReflectorIfIndex
OBJECT-TYPE
Only valid for remote-source MirroringGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.1INTEGERread-createcurrent
hpnicfMirroringGroupReflectorRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.2RowStatusread-createcurrent
hpnicfMirroringGroupRprobeVlanTable
OBJECT-TYPE
MirroringGroup rprobe-vlan information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30not-accessiblecurrent
hpnicfMirroringGroupRprobeVlanEntry
OBJECT-TYPE
MirroringGroup rprobe-vlan information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1not-accessiblecurrent
hpnicfMirroringGroupRprobeVlanID
OBJECT-TYPE
Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.1INTEGER (0..4094)read-createcurrent
hpnicfMirroringGroupRprobeVlanRowStatus
OBJECT-TYPE
RowStatus, now support three status: createAndGo, active, destroy.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.2RowStatusread-createcurrent
hpnicfMirroringGroupMirrorMacTable
OBJECT-TYPE
MirroringGroup MAC information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31not-accessiblecurrent
hpnicfMirroringGroupMirrorMacEntry
OBJECT-TYPE
MirroringGroup MAC information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1not-accessiblecurrent
hpnicfMirroringGroupMirrorMacSeq
OBJECT-TYPE
The sequence MAC number of the same group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.1Integer32not-accessiblecurrent
hpnicfMirroringGroupMirrorMac
OBJECT-TYPE
The MAC address of the MirroringGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.2MacAddressread-createcurrent
hpnicfMirrorMacVlanID
OBJECT-TYPE
The vlan ID of MAC address .
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.3Integer32 (0..4094)read-createcurrent
hpnicfMirroringGroupMirroMacStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.4RowStatusread-createcurrent
hpnicfMirroringGroupMirrorVlanTable
OBJECT-TYPE
MirroringGroup Vlan Information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32not-accessiblecurrent
hpnicfMirroringGroupMirrorVlanEntry
OBJECT-TYPE
MirroringGroup Vlan Information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1not-accessiblecurrent
hpnicfMirroringGroupMirrorVlanSeq
OBJECT-TYPE
The sequence vlan number of the same group.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.1Integer32not-accessiblecurrent
hpnicfMirroringGroupMirrorVlanID
OBJECT-TYPE
The vlan ID of MirroringGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.2Integer32 (0..4094)read-createcurrent
hpnicfMirroringGroupMirrorVlanDirection
OBJECT-TYPE
The vlan direction of MirroringGroup.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.3INTEGER {inbound(1), outbound(2), both(3)}read-createcurrent
hpnicfMirroringGroupMirroVlanStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.4RowStatusread-createcurrent
hpnicfPortTrustTable
OBJECT-TYPE
Port trust information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33not-accessiblecurrent
hpnicfPortTrustEntry
OBJECT-TYPE
Port trust information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1not-accessiblecurrent
hpnicfPortTrustIfIndex
OBJECT-TYPE
ifIndex of the port which port trust is configured.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.1Integer32not-accessiblecurrent
hpnicfPortTrustTrustType
OBJECT-TYPE
Trust type of port trust.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.2INTEGER {port(1), cos(2), dscp(3)}read-writecurrent
hpnicfPortTrustOvercastType
OBJECT-TYPE
Overcast type of port trust.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.3INTEGER {noOvercast(1), overcastDSCP(2), overcastCOS(3)}read-writecurrent
hpnicfPortTrustReset
OBJECT-TYPE
This object is used to reset port trust to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.4INTEGER {reset(1)}read-writecurrent
hpnicfRemarkVlanIDTable
OBJECT-TYPE
Remark vlan ID information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34not-accessiblecurrent
hpnicfRemarkVlanIDEntry
OBJECT-TYPE
Remark vlan ID information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1not-accessiblecurrent
hpnicfRemarkVlanIDAclIndex
OBJECT-TYPE
Action identifier, acl index.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.1Integer32 (0..2999)not-accessiblecurrent
hpnicfRemarkVlanIDIfIndex
OBJECT-TYPE
Action identifier, ifIndex.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.2Integer32not-accessiblecurrent
hpnicfRemarkVlanIDVlanID
OBJECT-TYPE
Action identifier, vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.3Integer32 (0..4094)not-accessiblecurrent
hpnicfRemarkVlanIDDirection
OBJECT-TYPE
Action identifier, direction of data stream.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.4INTEGER {invalid(0), input(1), output(2)}not-accessiblecurrent
hpnicfRemarkVlanIDUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.5Integer32 (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfRemarkVlanIDUserAclRule
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.6Integer32 (0..65535)read-createcurrent
hpnicfRemarkVlanIDIpAclNum
OBJECT-TYPE
The num of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.7Integer32 (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfRemarkVlanIDIpAclRule
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.8Integer32 (0..65535)read-createcurrent
hpnicfRemarkVlanIDLinkAclNum
OBJECT-TYPE
The num of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.9Integer32 (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfRemarkVlanIDLinkAclRule
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.10Integer32 (0..65535)read-createcurrent
hpnicfRemarkVlanIDRemarkVlanID
OBJECT-TYPE
Remark vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.11Integer32 (0..4094)read-createcurrent
hpnicfRemarkVlanIDPacketType
OBJECT-TYPE
Packet type of the remarked vlan ID.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.12INTEGER {all(1), tagged(2), untagged(3)}read-createcurrent
hpnicfRemarkVlanIDRowStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.13RowStatusread-createcurrent
hpnicfCosToDscpMapTable
OBJECT-TYPE
COS to DSCP map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35not-accessiblecurrent
hpnicfCosToDscpMapEntry
OBJECT-TYPE
COS to DSCP map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1not-accessiblecurrent
hpnicfCosToDscpMapCosIndex
OBJECT-TYPE
COS index of COS to DSCP map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.1Integer32 (0..7)not-accessiblecurrent
hpnicfCosToDscpMapDscpValue
OBJECT-TYPE
DSCP value of COS to DSCP map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.2Integer32 (0..63)read-writecurrent
hpnicfCosToDscpMapReSet
OBJECT-TYPE
This object is used to reset COS to DSCP map to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.3INTEGER {reset(1)}read-writecurrent
hpnicfDscpToLocalPreMapTable
OBJECT-TYPE
DSCP to Local-precedence map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36not-accessiblecurrent
hpnicfDscpToLocalPreMapEntry
OBJECT-TYPE
DSCP to Local-precedence map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1not-accessiblecurrent
hpnicfDscpToLocalPreMapDscpIndex
OBJECT-TYPE
DSCP Index of DSCP to Local-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.1Integer32 (0..63)not-accessiblecurrent
hpnicfDscpToLocalPreMapLocalPreVal
OBJECT-TYPE
Local-precedence value of DSCP to Local-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.2Integer32 (0..7)read-writecurrent
hpnicfDscpToLocalPreMapReset
OBJECT-TYPE
This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.3INTEGER {reset(1)}read-writecurrent
hpnicfDscpToDropPreMapTable
OBJECT-TYPE
DSCP to Drop-precedence map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37not-accessiblecurrent
hpnicfDscpToDropPreMapEntry
OBJECT-TYPE
DSCP to Drop-precedence map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1not-accessiblecurrent
hpnicfDscpToDropPreMapDscpIndex
OBJECT-TYPE
DSCP Index of DSCP to Drop-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.1Integer32 (0..63)not-accessiblecurrent
hpnicfDscpToDropPreMapDropPreVal
OBJECT-TYPE
Drop-precedence value of DSCP to Drop-precedence map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.2Integer32 (0..2)read-writecurrent
hpnicfDscpToDropPreMapReset
OBJECT-TYPE
This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.3INTEGER {reset(1)}read-writecurrent
hpnicfDscpToCosMapTable
OBJECT-TYPE
DSCP to COS map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38not-accessiblecurrent
hpnicfDscpToCosMapEntry
OBJECT-TYPE
DSCP to COS map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1not-accessiblecurrent
hpnicfDscpToCosMapDscpIndex
OBJECT-TYPE
DSCP index of DSCP to COS map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.1Integer32 (0..63)not-accessiblecurrent
hpnicfDscpToCosMapCosValue
OBJECT-TYPE
COS value of DSCP to COS map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.2Integer32 (0..7)read-writecurrent
hpnicfDscpToCosMapReset
OBJECT-TYPE
This object is used to reset DSCP to COS map to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.3INTEGER {reset(1)}read-writecurrent
hpnicfDscpToDscpMapTable
OBJECT-TYPE
DSCP to DSCP map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39not-accessiblecurrent
hpnicfDscpToDscpMapEntry
OBJECT-TYPE
DSCP to DSCP map information.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1not-accessiblecurrent
hpnicfDscpToDscpMapDscpIndex
OBJECT-TYPE
DSCP index of DSCP to DSCP map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.1Integer32 (0..63)not-accessiblecurrent
hpnicfDscpToDscpMapDscpValue
OBJECT-TYPE
DSCP value of DSCP to DSCP map.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.2Integer32 (0..63)read-writecurrent
hpnicfDscpToDscpMapReset
OBJECT-TYPE
This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.
1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.3INTEGER {reset(1)}read-writecurrent