HPN-ICF-IPSEC-MONITOR-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.7
- Last updated
- 2004-10-26 00:00
- Namespace
- hp
- Source file
HPN-ICF-IPSEC-MONITOR-MIB- Digest
sha256:e1f4f05ec3e2d3ad11d4f15e43a1730ab6b00ac02f102bd445b0e434bf8c7dd4
Description
The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-IPSEC-MONITOR-MIB HPN-ICF-OID-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpnicfAuthAlgo TEXTUAL-CONVENTION The authentication algorithm used in the IKE negotiations. invalidAlg(2147483647) is defined as invalid value. | current | |||
| HpnicfDiffHellmanGrp TEXTUAL-CONVENTION The Diffie Hellman Group used in the IKE and IPSec negotiations. invalidGroup(2147483647) is defined as invalid value. | current | |||
| HpnicfEncapMode TEXTUAL-CONVENTION The encapsulation mode used by an IPSec Phase-2 Tunnel. invalidMode(2147483647) is defined as invalid value. | current | |||
| HpnicfEncryptAlgo TEXTUAL-CONVENTION The encryption algorithm used in the IKE and IPSec negotiations. invalidAlg(2147483647) is defined as invalid value. | current | |||
| HpnicfIPSecIDType TEXTUAL-CONVENTION The type of IPSec Identity. | current | |||
| HpnicfIPSecNegoType TEXTUAL-CONVENTION The type of key used by an IPSec Phase-2 Tunnel. invalidType(2147483647) is defined as invalid value. | current | |||
| HpnicfIPSecTunnelState TEXTUAL-CONVENTION The state of IPSec tunnel. | current | |||
| HpnicfSaProtocol TEXTUAL-CONVENTION The protocol of security association. | current | |||
| HpnicfTrafficType TEXTUAL-CONVENTION The type of the data flow. | current | |||
| HpnicfTrapStatus TEXTUAL-CONVENTION The switch which determines whether send a trap or not. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfIPSecObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1 | |||
| hpnicfIPSecTunnelTable OBJECT-TYPE The IPSec Phase-2 Tunnel Table. There is one entry in this table for each active IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1 | not-accessible | current | |
| hpnicfIPSecTunnelEntry OBJECT-TYPE Information about hpnicfIPSecTunnelTable. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1 | not-accessible | current | |
| hpnicfIPSecTunIfIndex OBJECT-TYPE The interface index( the ifIndex of ifTable ). | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfIPSecTunEntryIndex OBJECT-TYPE The index of IPSec policy applied in the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.2 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfIPSecTunIndex OBJECT-TYPE The index of IPSec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.3 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfIPSecTunIKETunnelIndex OBJECT-TYPE The index of the associated IPSec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.4 | Integer32 (1..2147483647) | read-only | current |
| hpnicfIPSecTunLocalAddr OBJECT-TYPE The IP address of the local peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.5 | IpAddress | read-only | current |
| hpnicfIPSecTunRemoteAddr OBJECT-TYPE The IP address of the remote peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.6 | IpAddress | read-only | current |
| hpnicfIPSecTunKeyType OBJECT-TYPE The key negotiate mode used by the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.7 | HpnicfIPSecNegoType | read-only | current |
| hpnicfIPSecTunEncapMode OBJECT-TYPE The encapsulation mode used by the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.8 | HpnicfEncapMode | read-only | current |
| hpnicfIPSecTunInitiator OBJECT-TYPE The initiator of this IPSec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.9 | INTEGER {local(1), remote(2), none(2147483647)} | read-only | current |
| hpnicfIPSecTunLifeSize OBJECT-TYPE The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.10 | Gauge32 | read-only | current |
| hpnicfIPSecTunLifeTime OBJECT-TYPE The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.11 | Integer32 (1..2147483647) | read-only | current |
| hpnicfIPSecTunRemainTime OBJECT-TYPE The remain time of SA in seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.12 | Integer32 (0..2147483647) | read-only | current |
| hpnicfIPSecTunActiveTime OBJECT-TYPE The duration the IPSec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.13 | Integer32 (0..2147483647) | read-only | current |
| hpnicfIPSecTunRemainSize OBJECT-TYPE The remain LifeSize of SA in kilobytes. 0 is defined as invalid value. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.14 | Gauge32 | read-only | current |
| hpnicfIPSecTunTotalRefreshes OBJECT-TYPE The total number of security association refreshing performed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.15 | Counter32 | read-only | current |
| hpnicfIPSecTunCurrentSaInstances OBJECT-TYPE The number of security associations which are currently active or expiring. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.16 | Gauge32 | read-only | current |
| hpnicfIPSecTunInSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the inbound security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.17 | HpnicfEncryptAlgo | read-only | current |
| hpnicfIPSecTunInSaAhAuthAlgo OBJECT-TYPE The authentication algorithm used by the inbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.18 | HpnicfAuthAlgo | read-only | current |
| hpnicfIPSecTunInSaEspAuthAlgo OBJECT-TYPE The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.19 | HpnicfAuthAlgo | read-only | current |
| hpnicfIPSecTunDiffHellmanGrp OBJECT-TYPE The Diffie Hellman Group used by the security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.20 | HpnicfDiffHellmanGrp | read-only | current |
| hpnicfIPSecTunOutSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the outbound security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.21 | HpnicfEncryptAlgo | read-only | current |
| hpnicfIPSecTunOutSaAhAuthAlgo OBJECT-TYPE The authentication algorithm used by the outbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.22 | HpnicfAuthAlgo | read-only | current |
| hpnicfIPSecTunOutSaEspAuthAlgo OBJECT-TYPE The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.23 | HpnicfAuthAlgo | read-only | current |
| hpnicfIPSecTunPolicyName OBJECT-TYPE The policy name used by this IPSec tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.24 | DisplayString | read-only | current |
| hpnicfIPSecTunPolicyNum OBJECT-TYPE The sequence number of policy used by this IPSec tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.25 | Integer32 (1..2147483647) | read-only | current |
| hpnicfIPSecTunStatus OBJECT-TYPE The status of the IPSec Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.26 | INTEGER {initial(1), ready(2), rekeyed(3), closed(4)} | read-only | current |
| hpnicfIPSecTunnelStatTable OBJECT-TYPE The IPSec Phase-2 Tunnel Statistics Table. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2 | not-accessible | current | |
| hpnicfIPSecTunnelStatEntry OBJECT-TYPE Information about hpnicfIPSecTunnelStatTable. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1 | not-accessible | current | |
| hpnicfIPSecTunInOctets OBJECT-TYPE The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.1 | Counter64 | read-only | current |
| hpnicfIPSecTunInDecompOctets OBJECT-TYPE The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.2 | Counter64 | read-only | current |
| hpnicfIPSecTunInPkts OBJECT-TYPE The total number of packets received by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.3 | Counter64 | read-only | current |
| hpnicfIPSecTunInDropPkts OBJECT-TYPE The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.4 | Counter64 | read-only | current |
| hpnicfIPSecTunInReplayDropPkts OBJECT-TYPE The total number of packets dropped during receiving process due to Anti-Replay process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.5 | Counter32 | read-only | current |
| hpnicfIPSecTunInAuthFails OBJECT-TYPE The total number of inbound authentication's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.6 | Counter32 | read-only | current |
| hpnicfIPSecTunInDecryptFails OBJECT-TYPE The total number of inbound decryption's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.7 | Counter32 | read-only | current |
| hpnicfIPSecTunOutOctets OBJECT-TYPE The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.8 | Counter64 | read-only | current |
| hpnicfIPSecTunOutUncompOctets OBJECT-TYPE The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.9 | Counter64 | read-only | current |
| hpnicfIPSecTunOutPkts OBJECT-TYPE The total number of packets sent by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.10 | Counter64 | read-only | current |
| hpnicfIPSecTunOutDropPkts OBJECT-TYPE The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.11 | Counter64 | read-only | current |
| hpnicfIPSecTunOutEncryptFails OBJECT-TYPE The total number of outbound encryption's which ended in failure by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.12 | Counter32 | read-only | current |
| hpnicfIPSecTunNoMemoryDropPkts OBJECT-TYPE The total number of packets dropped due to no enough memory by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.13 | Counter32 | read-only | current |
| hpnicfIPSecTunQueueFullDropPkts OBJECT-TYPE The total number of packets dropped due to queue full by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.14 | Counter32 | read-only | current |
| hpnicfIPSecTunInvalidLenDropPkts OBJECT-TYPE The total number of packets dropped due to invalid length packet by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.15 | Counter32 | read-only | current |
| hpnicfIPSecTunTooLongDropPkts OBJECT-TYPE The total number of packets dropped due to too long packet by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.16 | Counter32 | read-only | current |
| hpnicfIPSecTunInvalidSaDropPkts OBJECT-TYPE The total number of packets dropped due to invalid SA by this IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.17 | Counter32 | read-only | current |
| hpnicfIPSecSaTable OBJECT-TYPE The IPSec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3 | not-accessible | current | |
| hpnicfIPSecSaEntry OBJECT-TYPE Information about hpnicfIPSecSaTable. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1 | not-accessible | current | |
| hpnicfIPSecSaIndex OBJECT-TYPE The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPSec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hpnicfIPSecSaDirection OBJECT-TYPE The direction of the SA. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.2 | INTEGER {in(1), out(2)} | read-only | current |
| hpnicfIPSecSaValue OBJECT-TYPE The value of the SPI. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.3 | Unsigned32 (1..4294967295) | read-only | current |
| hpnicfIPSecSaProtocol OBJECT-TYPE The security protocol of the SA. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.4 | HpnicfSaProtocol | read-only | current |
| hpnicfIPSecSaEncryptAlgo OBJECT-TYPE The encryption algorithm used by the security association of the IPSec Phase-2 Tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.5 | HpnicfEncryptAlgo | read-only | current |
| hpnicfIPSecSaAuthAlgo OBJECT-TYPE The authentication algorithm used by the SA. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.6 | HpnicfAuthAlgo | read-only | current |
| hpnicfIPSecSaStatus OBJECT-TYPE The status of the SA. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.7 | INTEGER {active(1), expiring(2)} | read-only | current |
| hpnicfIPSecTrafficTable OBJECT-TYPE The IPSec Phase-2 Tunnel Traffic Table. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4 | not-accessible | current | |
| hpnicfIPSecTrafficEntry OBJECT-TYPE Information about hpnicfIPSecTrafficTable. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1 | not-accessible | current | |
| hpnicfIPSecTrafficLocalType OBJECT-TYPE The type of local peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.1 | HpnicfTrafficType | read-only | current |
| hpnicfIPSecTrafficLocalAddr1 OBJECT-TYPE The first specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet. If the local peer type is IP address range, then this is the value of beginning IP address of the range. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.2 | IpAddress | read-only | current |
| hpnicfIPSecTrafficLocalAddr2 OBJECT-TYPE The second specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet mask. If the local peer type is IP address range, then this is the value of ending IP address of the range. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.3 | IpAddress | read-only | current |
| hpnicfIPSecTrafficLocalProtocol OBJECT-TYPE The protocol number of the local peer's traffic. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.4 | Integer32 (0..255) | read-only | current |
| hpnicfIPSecTrafficLocalPort OBJECT-TYPE The port number of the local peer's traffic. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.5 | Integer32 (0..65535) | read-only | current |
| hpnicfIPSecTrafficRemoteType OBJECT-TYPE The type of remote peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.6 | HpnicfTrafficType | read-only | current |
| hpnicfIPSecTrafficRemoteAddr1 OBJECT-TYPE The first specification of remote peer's IP address. If the remote peer type is single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet. If the remote peer type is IP address range, then this is the value of beginning IP address of the range. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.7 | IpAddress | read-only | current |
| hpnicfIPSecTrafficRemoteAddr2 OBJECT-TYPE Single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote peer type is IP address range, then this is the value of ending IP address of the range. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8 | IpAddress | read-only | current |
| hpnicfIPSecTrafficRemoteProtocol OBJECT-TYPE The protocol number of the remote peer's traffic. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.9 | Integer32 (0..255) | read-only | current |
| hpnicfIPSecTrafficRemotePort OBJECT-TYPE The port number of the remote peer's traffic. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.10 | Integer32 (0..65535) | read-only | current |
| hpnicfIPSecGlobalStats OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5 | |||
| hpnicfIPSecGlobalActiveTunnels OBJECT-TYPE The total number of currently active IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.1 | Gauge32 | read-only | current |
| hpnicfIPSecGlobalActiveSas OBJECT-TYPE The total number of currently active or expiring IPSec Phase-2 SA. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.2 | Gauge32 | read-only | current |
| hpnicfIPSecGlobalInOctets OBJECT-TYPE The total number of octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.3 | Counter64 | read-only | current |
| hpnicfIPSecGlobalInDecompOctets OBJECT-TYPE The total number of decompressed octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.4 | Counter64 | read-only | current |
| hpnicfIPSecGlobalInPkts OBJECT-TYPE The total number of packets received by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.5 | Counter64 | read-only | current |
| hpnicfIPSecGlobalInDrops OBJECT-TYPE The total number of packets dropped during receiving process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.6 | Counter64 | read-only | current |
| hpnicfIPSecGlobalInReplayDrops OBJECT-TYPE The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.7 | Counter32 | read-only | current |
| hpnicfIPSecGlobalInAuthFails OBJECT-TYPE The total number of inbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.8 | Counter32 | read-only | current |
| hpnicfIPSecGlobalInDecryptFails OBJECT-TYPE The total number of inbound decryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.9 | Counter32 | read-only | current |
| hpnicfIPSecGlobalOutOctets OBJECT-TYPE The total number of octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.10 | Counter64 | read-only | current |
| hpnicfIPSecGlobalOutUncompOctets OBJECT-TYPE The total number of uncompressed octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.11 | Counter64 | read-only | current |
| hpnicfIPSecGlobalOutPkts OBJECT-TYPE The total number of packets sent by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.12 | Counter64 | read-only | current |
| hpnicfIPSecGlobalOutDrops OBJECT-TYPE The total number of packets dropped during sending process by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.13 | Counter64 | read-only | current |
| hpnicfIPSecGlobalOutEncryptFails OBJECT-TYPE The total number of outbound encryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.14 | Counter32 | read-only | current |
| hpnicfIPSecGlobalNoMemoryDropPkts OBJECT-TYPE The total number of packets dropped due to no enough memory by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.15 | Counter32 | read-only | current |
| hpnicfIPSecGlobalNoFindSaDropPkts OBJECT-TYPE The total number of packets dropped due to not find SA by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.16 | Counter32 | read-only | current |
| hpnicfIPSecGlobalQueueFullDropPkts OBJECT-TYPE The total number of packets dropped due to queue full by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.17 | Counter32 | read-only | current |
| hpnicfIPSecGlobalInvalidLenDropPkts OBJECT-TYPE The total number of packets dropped due to invalid packet length by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.18 | Counter32 | read-only | current |
| hpnicfIPSecGlobalTooLongDropPkts OBJECT-TYPE The total number of packets dropped due to too long packet by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.19 | Counter32 | read-only | current |
| hpnicfIPSecGlobalInvalidSaDropPkts OBJECT-TYPE The total number of packets dropped due to invalid SA by all current and previous IPSec Phase-2 Tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.20 | Counter32 | read-only | current |
| hpnicfIPSecTrapObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6 | |||
| hpnicfIPSecPolicyName OBJECT-TYPE The IPSec policy name with a trap. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.1 | DisplayString | accessible-for-notify | current |
| hpnicfIPSecPolicySeqNum OBJECT-TYPE The IPSec policy sequence number with a trap. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.2 | Integer32 | accessible-for-notify | current |
| hpnicfIPSecPolicySize OBJECT-TYPE The number of IPSec policies with a trap. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.3 | Integer32 | accessible-for-notify | current |
| hpnicfIPSecSpiValue OBJECT-TYPE The SPI value associated with a trap. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.4 | Integer32 | accessible-for-notify | current |
| hpnicfIPSecTrapCntl OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7 | |||
| hpnicfIPSecTrapGlobalCntl OBJECT-TYPE Indicates whether all IPSec traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.1 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecTunnelStartTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecTunnelStart traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.2 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecTunnelStopTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecTunnelStop traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.3 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecNoSaTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecNoSaFailure traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.4 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecAuthFailureTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecAuthFailFailure traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.5 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecEncryFailureTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecEncryFailFailure traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.6 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecDecryFailureTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecDecryFailFailure traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.7 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecInvalidSaTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSec Invalid Sa Failure traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.8 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecPolicyAddTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecPolicyAdd traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.9 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecPolicyDelTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecPolicyDel traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.10 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecPolicyAttachTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecPolicyAttach traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.11 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecPolicyDetachTrapCntl OBJECT-TYPE Indicates whether hpnicfIPSecPolicyDetach traps should be generated. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.12 | HpnicfTrapStatus | read-write | current |
| hpnicfIPSecTrap OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8 | |||
| hpnicfIPSecNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1 | |||
| hpnicfIPSecConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.2 | |||
| hpnicfIPSecCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.1 | |||
| hpnicfIPSecGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfIPSecTunnelStart NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 Tunnel is created. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.1 | current |
| hpnicfIPSecTunnelStop NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 Tunnel is deleted. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.2 | current |
| hpnicfIPSecNoSaFailure NOTIFICATION-TYPE This notification is generated when an IPSec Phase-2 non-existent SA error occurs. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.3 | current |
| hpnicfIPSecAuthFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 authentication failure occurs. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.4 | current |
| hpnicfIPSecEncryFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 tunnel has an encrypting failure. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.5 | current |
| hpnicfIPSecDecryFailFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 tunnel has a decrypting failure. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.6 | current |
| hpnicfIPSecInvalidSaFailure NOTIFICATION-TYPE This notification is generated when the IPSec phase-2 invalid SA failure occurs. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.7 | current |
| hpnicfIPSecPolicyAdd NOTIFICATION-TYPE This notification is generated when an IPSec policy is added. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.8 | current |
| hpnicfIPSecPolicyDel NOTIFICATION-TYPE This notification is generated when an IPSec policy is deleted. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.9 | current |
| hpnicfIPSecPolicyAttach NOTIFICATION-TYPE This notification is generated when an IPSec policy is attached with one interface. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.10 | current |
| hpnicfIPSecPolicyDetach NOTIFICATION-TYPE This notification is generated when an IPSec policy is detached with one interface. | 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.11 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hpnicfIPSecCompliance MODULE-COMPLIANCE | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.1.1 | current |
| hpnicfIPSecTunnelTableGroup OBJECT-GROUP The group contains the IPSec tunnel's property information. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.1 | current |
| hpnicfIPSecTunnelStatGroup OBJECT-GROUP The group contains the IPSec tunnel's statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.2 | current |
| hpnicfIPSecSaGroup OBJECT-GROUP The group contains the SA's property information. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.3 | current |
| hpnicfIPSecTrafficTableGroup OBJECT-GROUP The group contains the property information of the data flow protected by IPSec tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.4 | current |
| hpnicfIPSecGlobalStatsGroup OBJECT-GROUP The group contains all of the IPSec tunnel's statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.5 | current |
| hpnicfIPSecTrapObjectGroup OBJECT-GROUP The group contains all of trap objects of IPSec tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.6 | current |
| hpnicfIPSecTrapCntlGroup OBJECT-GROUP The group contains all of trap switches of IPSec tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.7 | current |
| hpnicfIPSecTrapGroup NOTIFICATION-GROUP The group contains all of trap of IPSec tunnels. | 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.8 | current |