HPN-ICF-IFQOS2-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.65
- Last updated
- 2013-11-28 00:00
- Revisions
- 2013-11-28 00:00
- Namespace
- hp
- Source file
HPN-ICF-IFQOS2-MIB- Digest
sha256:25eb798baac7001b408851d95e19befbef4cadabeb23ab9a4cf92f7146fed898
Description
Interface QoS management information base.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressIPv6, InetAddressPrefixLength |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-IFQOS2-MIB HPN-ICF-OID-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.65.2 | hpnicfCBQos2 | HPN-ICF-CBQOS2-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CarAction TEXTUAL-CONVENTION The actions taken when packets conforming or exceeding the configured CIR. | current | |||
| Direction TEXTUAL-CONVENTION Inbound or outbound. | current | |||
| PriorityQueue TEXTUAL-CONVENTION The type of priority queue. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfQos2 OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65 | |||
| hpnicfIfQoSHardwareQueueObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1 | |||
| hpnicfIfQoSHardwareQueueConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1 | |||
| hpnicfIfQoSQSModeTable OBJECT-TYPE A table of queue schedule mode information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1 | not-accessible | current | |
| hpnicfIfQoSQSModeEntry OBJECT-TYPE Queue schedule mode information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1 | not-accessible | current | |
| hpnicfIfQoSQSMode OBJECT-TYPE The mode of schedule. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1.1 | INTEGER {sp(1), sp0(2), sp1(3), sp2(4), wrr(5), hpnicffq(6), wrr-sp(7), byteCountWrr(8), byteCountWfq(9), gmb(10)} | read-write | current |
| hpnicfIfQoSQSWeightTable OBJECT-TYPE A table of queue schedule weight configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2 | not-accessible | current | |
| hpnicfIfQoSQSWeightEntry OBJECT-TYPE Queue schedule weight configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1 | not-accessible | current | |
| hpnicfIfQoSQueueID OBJECT-TYPE Queue ID | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.1 | Integer32 | not-accessible | current |
| hpnicfIfQoSQueueGroupType OBJECT-TYPE Group type of WRR and WFQ. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.2 | INTEGER {group0(1), group1(2), group2(3)} | read-write | current |
| hpnicfIfQoSQSType OBJECT-TYPE Schedule type. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.3 | INTEGER {weight(1), byte-count(2)} | read-write | current |
| hpnicfIfQoSQSValue OBJECT-TYPE Schedule value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.4 | Integer32 | read-write | current |
| hpnicfIfQoSQSMaxDelay OBJECT-TYPE Max delay. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.5 | Integer32 | read-write | current |
| hpnicfIfQoSQSMinBandwidth OBJECT-TYPE Min bandwidth. Unit: kbps. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.6 | Integer32 | read-write | current |
| hpnicfIfQoSQSMinBandwidthPercent OBJECT-TYPE Percent of min bandwidth. Unit: %. The value is 255 when the schedule mode of the queue is strict queuing. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.7 | Unsigned32 (0..100 | 255) | read-write | current |
| hpnicfIfQoSHardwareQueueRunInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2 | |||
| hpnicfIfQoSHardwareQueueRunInfoTable OBJECT-TYPE A table of queue statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1 | not-accessible | current | |
| hpnicfIfQoSHardwareQueueRunInfoEntry OBJECT-TYPE Queue statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1 | not-accessible | current | |
| hpnicfIfQoSPassPackets OBJECT-TYPE The number of forwarded packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSDropPackets OBJECT-TYPE The number of dropped packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSPassBytes OBJECT-TYPE The bytes of forwarded packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSPassPPS OBJECT-TYPE The PPS of forwarded packets. PPS: packets per second. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.4 | Unsigned32 | read-only | current |
| hpnicfIfQoSPassBPS OBJECT-TYPE The BPS of forwarded packets. BPS: bytes per second. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.5 | Unsigned32 | read-only | current |
| hpnicfIfQoSDropBytes OBJECT-TYPE The bytes of dropped packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.6 | Counter64 | read-only | current |
| hpnicfIfQoSQueueLengthInPkts OBJECT-TYPE The max number of packets which the queue can hold. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.7 | Unsigned32 | read-only | current |
| hpnicfIfQoSQueueLengthInBytes OBJECT-TYPE The max bytes of packets which the queue can hold. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.8 | Unsigned32 | read-only | current |
| hpnicfIfQoSCurQueuePkts OBJECT-TYPE The number of packets in the current queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.9 | Unsigned32 | read-only | current |
| hpnicfIfQoSCurQueueBytes OBJECT-TYPE The bytes of packets in the current queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.10 | Unsigned32 | read-only | current |
| hpnicfIfQoSCurQueuePPS OBJECT-TYPE The PPS of packets in the current queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.11 | Unsigned32 | read-only | current |
| hpnicfIfQoSCurQueueBPS OBJECT-TYPE The BPS of packets in the current queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.12 | Unsigned32 | read-only | current |
| hpnicfIfQoSTailDropPkts OBJECT-TYPE The number of packets dropped by tail dropping. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.13 | Counter64 | read-only | current |
| hpnicfIfQoSTailDropBytes OBJECT-TYPE The bytes of packets dropped by tail dropping. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.14 | Counter64 | read-only | current |
| hpnicfIfQoSTailDropPPS OBJECT-TYPE The PPS of packets dropped by tail dropping. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.15 | Unsigned32 | read-only | current |
| hpnicfIfQoSTailDropBPS OBJECT-TYPE The BPS of packets dropped by tail dropping. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.16 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropPkts OBJECT-TYPE The number of packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.17 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropBytes OBJECT-TYPE The bytes of packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.18 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropPPS OBJECT-TYPE The PPS of packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.19 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropBPS OBJECT-TYPE The BPS of packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.20 | Unsigned32 | read-only | current |
| hpnicfIfQoSHQueueTcpRunInfoTable OBJECT-TYPE A table of queue statistic information about TCP and non-TCP packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2 | not-accessible | current | |
| hpnicfIfQoSHQueueTcpRunInfoEntry OBJECT-TYPE Queue statistic information entry about TCP and non-TCP packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1 | not-accessible | current | |
| hpnicfIfQoSWredDropLPreNTcpPkts OBJECT-TYPE The number of low-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropLPreNTcpBytes OBJECT-TYPE The bytes of low-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropLPreNTcpPPS OBJECT-TYPE The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.3 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropLPreNTcpBPS OBJECT-TYPE The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.4 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropLPreTcpPkts OBJECT-TYPE The number of low-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.5 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropLPreTcpBytes OBJECT-TYPE The bytes of low-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.6 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropLPreTcpPPS OBJECT-TYPE The PPS of low-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.7 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropLPreTcpBPS OBJECT-TYPE The BPS of low-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.8 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropHPreNTcpPkts OBJECT-TYPE The number of high-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.9 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropHPreNTcpBytes OBJECT-TYPE The bytes of high-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.10 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropHPreNTcpPPS OBJECT-TYPE The PPS of high-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.11 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropHPreNTcpBPS OBJECT-TYPE The BPS of high-precedence non-TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.12 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropHPreTcpPkts OBJECT-TYPE The number of high-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.13 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropHPreTcpBytes OBJECT-TYPE The bytes of high-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.14 | Counter64 | read-only | current |
| hpnicfIfQoSWredDropHPreTcpPPS OBJECT-TYPE The PPS of high-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.15 | Unsigned32 | read-only | current |
| hpnicfIfQoSWredDropHPreTcpBPS OBJECT-TYPE The BPS of high-precedence TCP packets dropped by WRED. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.16 | Unsigned32 | read-only | current |
| hpnicfIfQoSSoftwareQueueObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2 | |||
| hpnicfIfQoSFIFOObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1 | |||
| hpnicfIfQoSFIFOConfigTable OBJECT-TYPE A table of FIFO queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1 | not-accessible | current | |
| hpnicfIfQoSFIFOConfigEntry OBJECT-TYPE FIFO queue information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1 | not-accessible | current | |
| hpnicfIfQoSFIFOMaxQueueLen OBJECT-TYPE The maximum length of FIFO queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1.1 | Integer32 | read-write | current |
| hpnicfIfQoSFIFORunInfoTable OBJECT-TYPE A table of FIFO queue statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2 | not-accessible | current | |
| hpnicfIfQoSFIFORunInfoEntry OBJECT-TYPE FIFO queue statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1 | not-accessible | current | |
| hpnicfIfQoSFIFOSize OBJECT-TYPE The number of packet in FIFO queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSFIFODiscardPackets OBJECT-TYPE The number of discard packet. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSPQObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2 | |||
| hpnicfIfQoSPQConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1 | |||
| hpnicfIfQoSPQDefaultTable OBJECT-TYPE A table of priority queue default configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1 | not-accessible | current | |
| hpnicfIfQoSPQDefaultEntry OBJECT-TYPE Priority queue default configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1 | not-accessible | current | |
| hpnicfIfQoSPQListNumber OBJECT-TYPE Priority queue list number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.1 | Integer32 (1..16) | not-accessible | current |
| hpnicfIfQoSPQDefaultQueueType OBJECT-TYPE Specify priority queue that packets put into by default. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.2 | PriorityQueue | read-write | current |
| hpnicfIfQoSPQQueueLengthTable OBJECT-TYPE A table of queue length of priority queue configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2 | not-accessible | current | |
| hpnicfIfQoSPQQueueLengthEntry OBJECT-TYPE Queue length of priority queue configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1 | not-accessible | current | |
| hpnicfIfQoSPQQueueLengthType OBJECT-TYPE Type of priority queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.1 | PriorityQueue | not-accessible | current |
| hpnicfIfQoSPQQueueLengthValue OBJECT-TYPE The size of priority queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.2 | Integer32 (1..1024) | read-write | current |
| hpnicfIfQoSPQClassRuleTable OBJECT-TYPE A table of class rule of priority queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3 | not-accessible | current | |
| hpnicfIfQoSPQClassRuleEntry OBJECT-TYPE A table of class rule of priority queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1 | not-accessible | current | |
| hpnicfIfQoSPQClassRuleType OBJECT-TYPE Type of class rule. 'ipall' means all ip packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.1 | INTEGER {interface(1), ipv4acl(2), ipv6acl(3), fragments(4), greater-than(5), less-than(6), tcp(7), udp(8), ipall(9), mpls(10)} | not-accessible | current |
| hpnicfIfQoSPQClassRuleValue OBJECT-TYPE Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.2 | Integer32 | not-accessible | current |
| hpnicfIfQoSPQClassRuleQueueType OBJECT-TYPE Specify the queue for matched packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.3 | PriorityQueue | read-create | current |
| hpnicfIfQoSPQClassRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.4 | RowStatus | read-create | current |
| hpnicfIfQoSPQApplyTable OBJECT-TYPE A table of priority queue instance. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4 | not-accessible | current | |
| hpnicfIfQoSPQApplyEntry OBJECT-TYPE Priority queue instance information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1 | not-accessible | current | |
| hpnicfIfQoSPQApplyListNumber OBJECT-TYPE Priority queue list number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.1 | Integer32 (1..16) | read-create | current |
| hpnicfIfQoSPQApplyRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.2 | RowStatus | read-create | current |
| hpnicfIfQoSPQRunInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2 | |||
| hpnicfIfQoSPQRunInfoTable OBJECT-TYPE A table of priority queue statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1 | not-accessible | current | |
| hpnicfIfQoSPQRunInfoEntry OBJECT-TYPE Priority queue statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1 | not-accessible | current | |
| hpnicfIfQoSPQType OBJECT-TYPE The type of priority queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.1 | PriorityQueue | not-accessible | current |
| hpnicfIfQoSPQSize OBJECT-TYPE The number of packets in the priority queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.2 | Integer32 | read-only | current |
| hpnicfIfQoSPQLength OBJECT-TYPE The maximum length of priority queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.3 | Integer32 | read-only | current |
| hpnicfIfQoSPQDiscardPackets OBJECT-TYPE The packet number of priority queue discard. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSCQObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3 | |||
| hpnicfIfQoSCQConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1 | |||
| hpnicfIfQoSCQDefaultTable OBJECT-TYPE A table of custom queue default configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1 | not-accessible | current | |
| hpnicfIfQoSCQDefaultEntry OBJECT-TYPE Custom queue default configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1 | not-accessible | current | |
| hpnicfIfQoSCQListNumber OBJECT-TYPE Custom queue list number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.1 | Integer32 (1..16) | not-accessible | current |
| hpnicfIfQoSCQDefaultQueueID OBJECT-TYPE Default queue ID. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.2 | Integer32 (0..16) | read-write | current |
| hpnicfIfQoSCQQueueLengthTable OBJECT-TYPE A table of queue length of custom queue configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2 | not-accessible | current | |
| hpnicfIfQoSCQQueueLengthEntry OBJECT-TYPE Queue length of custom queue configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1 | not-accessible | current | |
| hpnicfIfQoSCQQueueID OBJECT-TYPE Custom queue index. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.1 | Integer32 (1..16) | not-accessible | current |
| hpnicfIfQoSCQQueueLength OBJECT-TYPE The size of custom queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.2 | Integer32 (1..1024) | read-write | current |
| hpnicfIfQoSCQQueueServing OBJECT-TYPE The maximum bytes that the specified queue can transmit in each turn. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.3 | Integer32 | read-write | current |
| hpnicfIfQoSCQClassRuleTable OBJECT-TYPE A table of class rule of custom queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3 | not-accessible | current | |
| hpnicfIfQoSCQClassRuleEntry OBJECT-TYPE A table of class rule of custom queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1 | not-accessible | current | |
| hpnicfIfQoSCQClassRuleType OBJECT-TYPE Type of class rule. 'ipall' means all ip packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.1 | INTEGER {interface(1), ipv4acl(2), ipv6acl(3), fragments(4), greater-than(5), less-than(6), tcp(7), udp(8), ipall(9), mpls(10)} | not-accessible | current |
| hpnicfIfQoSCQClassRuleValue OBJECT-TYPE Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.2 | Integer32 | not-accessible | current |
| hpnicfIfQoSCQClassRuleQueueID OBJECT-TYPE Specify the queue for matched packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.3 | Integer32 (1..16) | read-create | current |
| hpnicfIfQoSCQClassRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.4 | RowStatus | read-create | current |
| hpnicfIfQoSCQApplyTable OBJECT-TYPE A table of custom queue instance. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4 | not-accessible | current | |
| hpnicfIfQoSCQApplyEntry OBJECT-TYPE Custom queue instance information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1 | not-accessible | current | |
| hpnicfIfQoSCQApplyListNumber OBJECT-TYPE Custom queue list number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.1 | Integer32 (1..16) | read-create | current |
| hpnicfIfQoSCQApplyRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.2 | RowStatus | read-create | current |
| hpnicfIfQoSCQRunInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2 | |||
| hpnicfIfQoSCQRunInfoTable OBJECT-TYPE A table of custom queue statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1 | not-accessible | current | |
| hpnicfIfQoSCQRunInfoEntry OBJECT-TYPE Custom queue statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1 | not-accessible | current | |
| hpnicfIfQoSCQRunInfoSize OBJECT-TYPE The number of packets in the custom queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSCQRunInfoLength OBJECT-TYPE The maximum length of custom queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.2 | Integer32 | read-only | current |
| hpnicfIfQoSCQRunInfoDiscardPackets OBJECT-TYPE The packet number of custom queue discard. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSWFQObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4 | |||
| hpnicfIfQoSWFQConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1 | |||
| hpnicfIfQoSWFQTable OBJECT-TYPE A table of weighted fair queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1 | not-accessible | current | |
| hpnicfIfQoSWFQEntry OBJECT-TYPE Weighted fair queue information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1 | not-accessible | current | |
| hpnicfIfQoSWFQQueueLength OBJECT-TYPE The length of weighted fair queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.1 | Integer32 (1..1024) | read-create | current |
| hpnicfIfQoSWFQQueueNumber OBJECT-TYPE The number of weighted fair queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.2 | INTEGER {size16(1), size32(2), size64(3), size128(4), size256(5), size512(6), size1024(7), size2048(8), size4096(9)} | read-create | current |
| hpnicfIfQoSWFQRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.3 | RowStatus | read-create | current |
| hpnicfIfQoSWFQType OBJECT-TYPE The type of weighted fair queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.4 | INTEGER {ip-precedence(1), dscp(2)} | read-create | current |
| hpnicfIfQoSWFQRunInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2 | |||
| hpnicfIfQoSWFQRunInfoTable OBJECT-TYPE A table of weighted fair queue statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1 | not-accessible | current | |
| hpnicfIfQoSWFQRunInfoEntry OBJECT-TYPE Weighted fair queue statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1 | not-accessible | current | |
| hpnicfIfQoSWFQSize OBJECT-TYPE The number of packets in all the queues | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSWFQLength OBJECT-TYPE The length of weighted fair queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.2 | Integer32 | read-only | current |
| hpnicfIfQoSWFQDiscardPackets OBJECT-TYPE The number of discarded packets in all the queues. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSWFQHashedActiveQueues OBJECT-TYPE The number of active queues. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.4 | Integer32 | read-only | current |
| hpnicfIfQoSWFQHashedMaxActiveQueues OBJECT-TYPE The number of maximum active queues. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.5 | Integer32 | read-only | current |
| hpnicfIfQosWFQhashedTotalQueues OBJECT-TYPE The number of queues. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.6 | Integer32 | read-only | current |
| hpnicfIfQoSBandwidthGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5 | |||
| hpnicfIfQoSBandwidthTable OBJECT-TYPE A table of bandwidth of interface information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1 | not-accessible | current | |
| hpnicfIfQoSBandwidthEntry OBJECT-TYPE Bandwidth information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1 | not-accessible | current | |
| hpnicfIfQoSMaxBandwidth OBJECT-TYPE The maximum bandwidth of interface. Unit : Kbps | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.1 | Integer32 | read-create | current |
| hpnicfIfQoSReservedBandwidthPct OBJECT-TYPE Max reserved bandwidth of the interface for QoS. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.2 | Integer32 (1..100) | read-create | current |
| hpnicfIfQoSBandwidthRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.3 | RowStatus | read-create | current |
| hpnicfIfQoSQmtokenGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6 | |||
| hpnicfIfQoSQmtokenTable OBJECT-TYPE A table of qmtoken information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1 | not-accessible | current | |
| hpnicfIfQoSQmtokenEntry OBJECT-TYPE Qmtoken information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1 | not-accessible | current | |
| hpnicfIfQoSQmtokenNumber OBJECT-TYPE The number of tokens. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.1 | Integer32 (1..50) | read-create | current |
| hpnicfIfQoSQmtokenRosStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.2 | RowStatus | read-create | current |
| hpnicfIfQoSRTPQObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7 | |||
| hpnicfIfQoSRTPQConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1 | |||
| hpnicfIfQoSRTPQConfigTable OBJECT-TYPE A table of Real-time protocol queue information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1 | not-accessible | current | |
| hpnicfIfQoSRTPQConfigEntry OBJECT-TYPE The information of Real-time protocol queue entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1 | not-accessible | current | |
| hpnicfIfQoSRTPQStartPort OBJECT-TYPE Minimum threshold of UDP destination port. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.1 | Integer32 (2000..65535) | read-create | current |
| hpnicfIfQoSRTPQEndPort OBJECT-TYPE Maximum threshold of UDP destination port. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.2 | Integer32 (2000..65535) | read-create | current |
| hpnicfIfQoSRTPQReservedBandwidth OBJECT-TYPE Maximum bandwidth. unit : kbps | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.3 | Integer32 | read-create | current |
| hpnicfIfQoSRTPQCbs OBJECT-TYPE Committed Burst Size. Unit: byte | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.4 | Unsigned32 | read-create | current |
| hpnicfIfQoSRTPQRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.5 | RowStatus | read-create | current |
| hpnicfIfQoSRTPQRunInfoGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2 | |||
| hpnicfIfQoSRTPQRunInfoTable OBJECT-TYPE A table of statistic information of Real-time protocol information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1 | not-accessible | current | |
| hpnicfIfQoSRTPQRunInfoEntry OBJECT-TYPE Statistic information of Real-time protocol information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1 | not-accessible | current | |
| hpnicfIfQoSRTPQPacketNumber OBJECT-TYPE The number of packets in the Real-time protocol queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSRTPQPacketSize OBJECT-TYPE The size of Real-time protocol queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.2 | Integer32 | read-only | current |
| hpnicfIfQoSRTPQOutputPackets OBJECT-TYPE The number of output packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSRTPQDiscardPackets OBJECT-TYPE The number of discard packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSCarListObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8 | |||
| hpnicfIfQoCarListGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1 | |||
| hpnicfIfQoSCarlTable OBJECT-TYPE Committed Access Rate List(CARL) table. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1 | not-accessible | current | |
| hpnicfIfQoSCarlEntry OBJECT-TYPE CARL configuration infomation. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1 | not-accessible | current | |
| hpnicfIfQoSCarlListNum OBJECT-TYPE The index of the table, which is the CARL number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.1 | Integer32 | not-accessible | current |
| hpnicfIfQoSCarlParaType OBJECT-TYPE Parameter type of the CARL number. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.2 | INTEGER {macAddress(1), precMask(2), dscpMask(3)} | read-create | current |
| hpnicfIfQoSCarlParaValue OBJECT-TYPE Parameter value of the CARL table. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.3 | OCTET STRING | read-create | current |
| hpnicfIfQoSCarlRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.4 | RowStatus | read-create | current |
| hpnicfIfQoSLineRateObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3 | |||
| hpnicfIfQoSLRConfigTable OBJECT-TYPE A table of line rate configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1 | not-accessible | current | |
| hpnicfIfQoSLRConfigEntry OBJECT-TYPE Line rate configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1 | not-accessible | current | |
| hpnicfIfQoSLRDirection OBJECT-TYPE Line rate on the inbound or outbound of data stream. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.1 | Direction | not-accessible | current |
| hpnicfIfQoSLRCir OBJECT-TYPE Committed Information Rate. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.2 | Unsigned32 | read-create | current |
| hpnicfIfQoSLRCbs OBJECT-TYPE Committed Burst Size. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.3 | Unsigned32 | read-create | current |
| hpnicfIfQoSLREbs OBJECT-TYPE Excess Burst Size. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.4 | Unsigned32 | read-create | current |
| hpnicfIfQoSRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.5 | RowStatus | read-create | current |
| hpnicfIfQoSLRPir OBJECT-TYPE Peak Information Rate. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.6 | Unsigned32 | read-create | current |
| hpnicfIfQoSLRUnit OBJECT-TYPE LR Unit: Absolute, Unit Kbps (1) Percent, Unit % (2) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.7 | INTEGER {unitAbsolute(1), unitPercent(2)} | read-create | current |
| hpnicfIfQoSLRRunInfoTable OBJECT-TYPE A table of line rate run info information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2 | not-accessible | current | |
| hpnicfIfQoSLRRunInfoEntry OBJECT-TYPE Line rate run info information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1 | not-accessible | current | |
| hpnicfIfQoSLRRunInfoPassedPackets OBJECT-TYPE The number of passed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSLRRunInfoPassedBytes OBJECT-TYPE The number of passed bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSLRRunInfoDelayedPackets OBJECT-TYPE The number of delayed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSLRRunInfoDelayedBytes OBJECT-TYPE The number of delayed bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSLRRunInfoActiveShaping OBJECT-TYPE The flag of shaping. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.5 | INTEGER {active(1), inactive(2)} | read-only | current |
| hpnicfIfQoSCARObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4 | |||
| hpnicfIfQoSAggregativeCarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1 | |||
| hpnicfIfQoSAggregativeCarNextIndex OBJECT-TYPE This object contains an appropriate value to be used for hpnicfIfQoSAggregativeCarIndex when creating rows in the hpnicfIfQoSAggregativeCarConfigTable. Begin with 1. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSAggregativeCarConfigTable OBJECT-TYPE A table of aggregative car information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarConfigEntry OBJECT-TYPE Aggregative car information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarIndex OBJECT-TYPE The index of aggregative car. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.1 | Integer32 (1..65534) | not-accessible | current |
| hpnicfIfQoSAggregativeCarName OBJECT-TYPE The name of aggregative car. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.2 | OCTET STRING (SIZE(1..31)) | read-create | current |
| hpnicfIfQoSAggregativeCarCir OBJECT-TYPE Committed-information-rate. Unit : kbps | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.3 | Unsigned32 | read-create | current |
| hpnicfIfQoSAggregativeCarCbs OBJECT-TYPE Committed-burst-size. Unit : byte | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.4 | Unsigned32 | read-create | current |
| hpnicfIfQoSAggregativeCarEbs OBJECT-TYPE Excess-burst-size. Unit : byte | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.5 | Unsigned32 | read-create | current |
| hpnicfIfQoSAggregativeCarPir OBJECT-TYPE Peak-information-rate. Unit : kbps | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.6 | Unsigned32 | read-create | current |
| hpnicfIfQoSAggregativeCarGreenActionType OBJECT-TYPE Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.7 | CarAction | read-create | current |
| hpnicfIfQoSAggregativeCarGreenActionValue OBJECT-TYPE The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.8 | Integer32 (0..63 | 255) | read-create | current |
| hpnicfIfQoSAggregativeCarYellowActionType OBJECT-TYPE Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.9 | CarAction | read-create | current |
| hpnicfIfQoSAggregativeCarYellowActionValue OBJECT-TYPE The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.10 | Integer32 (0..63 | 255) | read-create | current |
| hpnicfIfQoSAggregativeCarRedActionType OBJECT-TYPE Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.11 | CarAction | read-create | current |
| hpnicfIfQoSAggregativeCarRedActionValue OBJECT-TYPE The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.12 | Integer32 | read-create | current |
| hpnicfIfQoSAggregativeCarType OBJECT-TYPE The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.13 | INTEGER {aggregative(1), notAggregative(2)} | read-create | current |
| hpnicfIfQoSAggregativeCarRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.14 | RowStatus | read-create | current |
| hpnicfIfQoSAggregativeCarApplyTable OBJECT-TYPE A table of aggregative car instance. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarApplyEntry OBJECT-TYPE Aggregative car instance information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarApplyDirection OBJECT-TYPE Direction. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.1 | Direction | not-accessible | current |
| hpnicfIfQoSAggregativeCarApplyRuleType OBJECT-TYPE The type of class rule. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.2 | INTEGER {ipv4acl(1), ipv6acl(2), carl(3), any(4)} | not-accessible | current |
| hpnicfIfQoSAggregativeCarApplyRuleValue OBJECT-TYPE The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.3 | Integer32 | not-accessible | current |
| hpnicfIfQoSAggregativeCarApplyCarIndex OBJECT-TYPE The index of aggregative car. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.4 | Integer32 | read-create | current |
| hpnicfIfQoSAggregativeCarApplyRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.5 | RowStatus | read-create | current |
| hpnicfIfQoSAggregativeCarRunInfoTable OBJECT-TYPE A table of aggregative car statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarRunInfoEntry OBJECT-TYPE Aggregative car statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1 | not-accessible | current | |
| hpnicfIfQoSAggregativeCarGreenPackets OBJECT-TYPE Number of packets conforming CIR. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSAggregativeCarGreenBytes OBJECT-TYPE Number of bytes conforming CIR | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSAggregativeCarYellowPackets OBJECT-TYPE Number of yellow packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSAggregativeCarYellowBytes OBJECT-TYPE Number of yellow bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSAggregativeCarRedPackets OBJECT-TYPE Number of packets exceeding CIR. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.5 | Counter64 | read-only | current |
| hpnicfIfQoSAggregativeCarRedBytes OBJECT-TYPE Number of bytes exceeding CIR. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.6 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2 | |||
| hpnicfIfQoSTricolorCarConfigTable OBJECT-TYPE A table of tricolor car configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1 | not-accessible | current | |
| hpnicfIfQoSTricolorCarConfigEntry OBJECT-TYPE Tricolor car configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1 | not-accessible | current | |
| hpnicfIfQoSTricolorCarDirection OBJECT-TYPE Direction. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.1 | Direction | not-accessible | current |
| hpnicfIfQoSTricolorCarType OBJECT-TYPE The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.2 | INTEGER {ipv4acl(1), ipv6acl(2), carl(3), any(4)} | not-accessible | current |
| hpnicfIfQoSTricolorCarValue OBJECT-TYPE The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0; | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.3 | Integer32 | not-accessible | current |
| hpnicfIfQoSTricolorCarCir OBJECT-TYPE Committed Information Rate. Unit: kbps. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.4 | Unsigned32 | read-create | current |
| hpnicfIfQoSTricolorCarCbs OBJECT-TYPE Committed Burst Size. Unit: byte. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.5 | Unsigned32 | read-create | current |
| hpnicfIfQoSTricolorCarEbs OBJECT-TYPE Excess Burst Size. Unit: byte. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.6 | Unsigned32 | read-create | current |
| hpnicfIfQoSTricolorCarPir OBJECT-TYPE Peak Information Rate. Unit: kbps. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.7 | Unsigned32 | read-create | current |
| hpnicfIfQoSTricolorCarGreenActionType OBJECT-TYPE Green Action. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.8 | CarAction | read-create | current |
| hpnicfIfQoSTricolorCarGreenActionValue OBJECT-TYPE The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.9 | Integer32 (0..63 | 255) | read-create | current |
| hpnicfIfQoSTricolorCarYellowActionType OBJECT-TYPE Yellow Action. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.10 | CarAction | read-create | current |
| hpnicfIfQoSTricolorCarYellowActionValue OBJECT-TYPE The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.11 | Integer32 (0..63 | 255) | read-create | current |
| hpnicfIfQoSTricolorCarRedActionType OBJECT-TYPE Red Action | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.12 | CarAction | read-create | current |
| hpnicfIfQoSTricolorCarRedActionValue OBJECT-TYPE The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.13 | Integer32 (0..63 | 255) | read-create | current |
| hpnicfIfQoSTricolorCarRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.14 | RowStatus | read-create | current |
| hpnicfIfQoSTricolorCarRunInfoTable OBJECT-TYPE A table of tricolor car statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2 | not-accessible | current | |
| hpnicfIfQoSTricolorCarRunInfoEntry OBJECT-TYPE Tricolor car statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1 | not-accessible | current | |
| hpnicfIfQoSTricolorCarGreenPackets OBJECT-TYPE The number of green packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarGreenBytes OBJECT-TYPE The number of green bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarYellowPackets OBJECT-TYPE The number of yellow packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarYellowBytes OBJECT-TYPE The number of yellow bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarRedPackets OBJECT-TYPE The number of red packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.5 | Counter64 | read-only | current |
| hpnicfIfQoSTricolorCarRedBytes OBJECT-TYPE The number of red bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.6 | Counter64 | read-only | current |
| hpnicfIfQoSGTSObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5 | |||
| hpnicfIfQoSGTSConfigTable OBJECT-TYPE A table of generic traffic shaping information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1 | not-accessible | current | |
| hpnicfIfQoSGTSConfigEntry OBJECT-TYPE Generic traffic shaping information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1 | not-accessible | current | |
| hpnicfIfQoSGTSClassRuleType OBJECT-TYPE The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.1 | INTEGER {any(1), ipv4acl(2), ipv6acl(3), queue(4)} | not-accessible | current |
| hpnicfIfQoSGTSClassRuleValue OBJECT-TYPE Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.2 | Integer32 | not-accessible | current |
| hpnicfIfQoSGTSCir OBJECT-TYPE Committed Information Rate. Unit: kbps. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.3 | Unsigned32 | read-create | current |
| hpnicfIfQoSGTSCbs OBJECT-TYPE Committed Burst Size. Unit: byte. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.4 | Unsigned32 | read-create | current |
| hpnicfIfQoSGTSEbs OBJECT-TYPE Excess Burst Size. Unit: byte. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.5 | Unsigned32 | read-create | current |
| hpnicfIfQoSGTSQueueLength OBJECT-TYPE The length of queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.6 | Integer32 | read-create | current |
| hpnicfIfQoSGTSConfigRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.7 | RowStatus | read-create | current |
| hpnicfIfQoSGTSRunInfoTable OBJECT-TYPE A table of generic traffic shaping's statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2 | not-accessible | current | |
| hpnicfIfQoSGTSRunInfoEntry OBJECT-TYPE Generic traffic shaping's statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1 | not-accessible | current | |
| hpnicfIfQoSGTSQueueSize OBJECT-TYPE The number of packets in the queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSGTSPassedPackets OBJECT-TYPE The number of passed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSGTSPassedBytes OBJECT-TYPE The number of passed bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.3 | Counter64 | read-only | current |
| hpnicfIfQoSGTSDiscardPackets OBJECT-TYPE The number of discard packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.4 | Counter64 | read-only | current |
| hpnicfIfQoSGTSDiscardBytes OBJECT-TYPE The number of discard bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.5 | Counter64 | read-only | current |
| hpnicfIfQoSGTSDelayedPackets OBJECT-TYPE The number of delayed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.6 | Counter64 | read-only | current |
| hpnicfIfQoSGTSDelayedBytes OBJECT-TYPE The number of delayed bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.7 | Counter64 | read-only | current |
| hpnicfIfQoSWREDObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6 | |||
| hpnicfIfQoSWredGroupGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1 | |||
| hpnicfIfQoSWredGroupNextIndex OBJECT-TYPE This object contains an appropriate value to be used for hpnicfIfQoSWredGroupIndex when creating rows in the hpnicfIfQoSWredGroupTable. Begin with 0. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSWredGroupTable OBJECT-TYPE A table of WRED group information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2 | not-accessible | current | |
| hpnicfIfQoSWredGroupEntry OBJECT-TYPE WRED group information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1 | not-accessible | current | |
| hpnicfIfQoSWredGroupIndex OBJECT-TYPE WRED group index. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.1 | Integer32 | not-accessible | current |
| hpnicfIfQoSWredGroupName OBJECT-TYPE WRED group name. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.2 | OCTET STRING (SIZE(1..32)) | read-create | current |
| hpnicfIfQoSWredGroupType OBJECT-TYPE Type of WRED group. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.3 | INTEGER {userdefined(0), dot1p(1), ippre(2), dscp(3), localpre(4), atmclp(5), frde(6), exp(7), queue(8), dropLevel(9)} | read-create | current |
| hpnicfIfQoSWredGroupWeightingConstant OBJECT-TYPE Exponent for WRED calculates the average length of queue. If 'hpnicfIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'hpnicfIfQoSWredGroupExponent' of hpnicfIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.4 | Integer32 (1..15) | read-create | current |
| hpnicfIfQoSWredGroupRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.6 | RowStatus | read-create | current |
| hpnicfIfQoSWredGroupContentTable OBJECT-TYPE A table of priority WRED information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3 | not-accessible | current | |
| hpnicfIfQoSWredGroupContentEntry OBJECT-TYPE Priority WRED information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1 | not-accessible | current | |
| hpnicfIfQoSWredGroupContentIndex OBJECT-TYPE The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.1 | Integer32 (0..63) | not-accessible | current |
| hpnicfIfQoSWredGroupContentSubIndex OBJECT-TYPE The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.2 | Integer32 (0..63) | not-accessible | current |
| hpnicfIfQoSWredLowLimit OBJECT-TYPE Discard low limit. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.3 | Integer32 | read-create | current |
| hpnicfIfQoSWredHighLimit OBJECT-TYPE Discard high limit. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.4 | Integer32 | read-create | current |
| hpnicfIfQoSWredDiscardProb OBJECT-TYPE Discard probability. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.5 | Integer32 | read-create | current |
| hpnicfIfQoSWredGroupExponent OBJECT-TYPE Exponent for WRED calculates the average length of queue. Only 'hpnicfIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.6 | Integer32 (1..15) | read-create | current |
| hpnicfIfQoSWredRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.7 | RowStatus | read-create | current |
| hpnicfIfQoSWredGroupApplyIfTable OBJECT-TYPE A table of WRED group applied interface information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4 | not-accessible | current | |
| hpnicfIfQoSWredGroupApplyIfEntry OBJECT-TYPE WRED group applied interface information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1 | not-accessible | current | |
| hpnicfIfQoSWredGroupApplyIndex OBJECT-TYPE WRED group index. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.1 | Integer32 (0..256) | read-create | current |
| hpnicfIfQoSWredGroupApplyName OBJECT-TYPE WRED group name. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.2 | OCTET STRING | read-only | current |
| hpnicfIfQoSWredGroupIfRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.3 | RowStatus | read-create | current |
| hpnicfIfQoSWredApplyIfRunInfoTable OBJECT-TYPE A table of WRED statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5 | not-accessible | current | |
| hpnicfIfQoSWredApplyIfRunInfoEntry OBJECT-TYPE WRED statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1 | not-accessible | current | |
| hpnicfIfQoSWredPreRandomDropNum OBJECT-TYPE The number of random drop. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSWredPreTailDropNum OBJECT-TYPE The number of tail drop. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSPortWredGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2 | |||
| hpnicfIfQoSPortWredWeightConstantTable OBJECT-TYPE A table of port WRED configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1 | not-accessible | current | |
| hpnicfIfQoSPortWredWeightConstantEntry OBJECT-TYPE Port WRED configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1 | not-accessible | current | |
| hpnicfIfQoSPortWredEnable OBJECT-TYPE The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.1 | TruthValue | read-create | current |
| hpnicfIfQoSPortWredWeightConstant OBJECT-TYPE Weight constant. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.2 | Integer32 (1..16) | read-create | current |
| hpnicfIfQoSPortWredWeightConstantRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.3 | RowStatus | read-create | current |
| hpnicfIfQoSPortWredPreConfigTable OBJECT-TYPE A table of weighted random early detect precedence configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2 | not-accessible | current | |
| hpnicfIfQoSPortWredPreConfigEntry OBJECT-TYPE Weighted random early detect precedence configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1 | not-accessible | current | |
| hpnicfIfQoSPortWredPreID OBJECT-TYPE IP precedence, from 0 to 7. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.1 | Integer32 | not-accessible | current |
| hpnicfIfQoSPortWredPreLowLimit OBJECT-TYPE Low Limit(number of packets) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.2 | Integer32 | read-create | current |
| hpnicfIfQoSPortWredPreHighLimit OBJECT-TYPE High limit(number of packets) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.3 | Integer32 | read-create | current |
| hpnicfIfQoSPortWredPreDiscardProbability OBJECT-TYPE Discard probability denominator | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.4 | Integer32 | read-create | current |
| hpnicfIfQoSPortWredPreRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.5 | RowStatus | read-create | current |
| hpnicfIfQoSPortWredRunInfoTable OBJECT-TYPE A table of WRED statistic information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3 | not-accessible | current | |
| hpnicfIfQoSPortWredRunInfoEntry OBJECT-TYPE WRED statistic information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1 | not-accessible | current | |
| hpnicfIfQoSWREDTailDropNum OBJECT-TYPE The number of tail drop. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.1 | Counter64 | read-only | current |
| hpnicfIfQoSWREDRandomDropNum OBJECT-TYPE The number of random drop. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.2 | Counter64 | read-only | current |
| hpnicfIfQoSPortPriorityObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7 | |||
| hpnicfIfQoSPortPriorityConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1 | |||
| hpnicfIfQoSPortPriorityTable OBJECT-TYPE A table of port priority information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1 | not-accessible | current | |
| hpnicfIfQoSPortPriorityEntry OBJECT-TYPE Port priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1 | not-accessible | current | |
| hpnicfIfQoSPortPriorityValue OBJECT-TYPE The priority of a port. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1.1 | Integer32 (0..7) | read-write | current |
| hpnicfIfQoSPortPirorityTrustTable OBJECT-TYPE A table of each port's trusted priority information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2 | not-accessible | current | |
| hpnicfIfQoSPortPirorityTrustEntry OBJECT-TYPE Per-port trusted priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1 | not-accessible | current | |
| hpnicfIfQoSPortPriorityTrustTrustType OBJECT-TYPE Trusted priority type of a port. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.1 | INTEGER {untrust(1), dot1p(2), dscp(3), exp(4), ipPrecedence(5), dot11e(6), auto(7)} | read-write | current |
| hpnicfIfQoSPortPriorityTrustOvercastType OBJECT-TYPE The overcast type. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.2 | INTEGER {noOvercast(1), overcastDSCP(2), overcastCOS(3), overcast(4)} | read-write | current |
| hpnicfIfQoSMapObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9 | |||
| hpnicfIfQoSPriMapConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1 | |||
| hpnicfIfQoSPriMapGroupNextIndex OBJECT-TYPE This object contains an appropriate value to be used for hpnicfIfQoSPriMapGroupIndex when creating rows in the hpnicfIfQoSPriMapGroupTable. Begin with 64. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.1 | Integer32 | read-only | current |
| hpnicfIfQoSPriMapGroupTable OBJECT-TYPE A table of map group information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2 | not-accessible | current | |
| hpnicfIfQoSPriMapGroupEntry OBJECT-TYPE Map group information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1 | not-accessible | current | |
| hpnicfIfQoSPriMapGroupIndex OBJECT-TYPE The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.1 | Integer32 | not-accessible | current |
| hpnicfIfQoSPriMapGroupType OBJECT-TYPE The type of map group. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.2 | INTEGER {userdefined(1), dot1p-dp(2), dot1p-dscp(3), dot1p-lp(4), dscp-dot1p(5), dscp-dp(6), dscp-dscp(7), dscp-lp(8), exp-dp(9), exp-lp(10)} | read-create | current |
| hpnicfIfQoSPriMapGroupName OBJECT-TYPE The name of map group. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.3 | OCTET STRING (SIZE(1..32)) | read-create | current |
| hpnicfIfQoSPriMapGroupRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.4 | RowStatus | read-create | current |
| hpnicfIfQoSPriMapContentTable OBJECT-TYPE A table of priority map configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3 | not-accessible | current | |
| hpnicfIfQoSPriMapContentEntry OBJECT-TYPE Priority map configuration information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1 | not-accessible | current | |
| hpnicfIfQoSPriMapGroupImportValue OBJECT-TYPE Priority map table import value list. Different map has different hpnicfIfQoSPriMapConfigImportValue. Map-name Range of hpnicfIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.1 | Integer32 (0..63) | not-accessible | current |
| hpnicfIfQoSPriMapGroupExportValue OBJECT-TYPE Priority map table output. Different map has different hpnicfIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.2 | Integer32 (0..63) | read-create | current |
| hpnicfIfQoSPriMapContentRowStatus OBJECT-TYPE RowStatus. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.3 | RowStatus | read-create | current |
| hpnicfIfQoSPrePriMapTable OBJECT-TYPE Pre-defined priority mapping table information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4 | not-accessible | current | |
| hpnicfIfQoSPrePriMapEntry OBJECT-TYPE Pre-defined priority mapping table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1 | not-accessible | current | |
| hpnicfIfQoSPrePriMapTableType OBJECT-TYPE The type of pre-defined priority mapping table. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.1 | INTEGER {dot1pToLp(1), dot1pToDp(2), expToLp(3), dscpToLp(4), expToDp(5), dscpToDp(6), dscpToDot1p(7), dot1pToDscp(8), dscpToDscp(9), dscpToExp(10), expToDscp(11), expToDot1p(12), expToExp(13), lpToDot1p(14), dot1pToRpr(15), dscpToRpr(16), expToRpr(17), ippreToRpr(18), upToDot1p(19), upToDscp(20), upToExp(21), upToDp(22), upToLp(23), upToRpr(24), upToFc(25), lpTodscp(26), dot11eToLp(27), lpToDot11e(28), lpToLp(29), dot1pToExp(30), lpToExp(31), lpToDp(32), upToUp(33), dot1pToDot1p(34)} | not-accessible | current |
| hpnicfIfQoSPrePriMapTableColor OBJECT-TYPE The color of pre-defined priority mapping table. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.2 | INTEGER {noColor(1), green(2), yellow(3), red(4)} | not-accessible | current |
| hpnicfIfQoSPrePriMapTableDirection OBJECT-TYPE The direction of pre-defined priority mapping table. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.3 | INTEGER {noDirection(1), inbound(2), outbound(3)} | not-accessible | current |
| hpnicfIfQoSPrePriMapTableImportValue OBJECT-TYPE Input value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableImportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableImportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dot11e (0..7) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.4 | Integer32 (0..63) | not-accessible | current |
| hpnicfIfQoSPrePriMapTableExportValue OBJECT-TYPE Output value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableExportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableExportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dp (0..2) fc (0..7) rpr (0..2) | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.5 | Integer32 (0..63) | read-write | current |
| hpnicfIfQoSL3PlusObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10 | |||
| hpnicfIfQoSPortBindingGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1 | |||
| hpnicfIfQoSPortBindingTable OBJECT-TYPE A table of EACL sub-interface binding information for L3+ board . | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1 | not-accessible | current | |
| hpnicfIfQoSPortBindingEntry OBJECT-TYPE Binding information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1 | not-accessible | current | |
| hpnicfIfQoSBindingIf OBJECT-TYPE The binding interface. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.1 | Integer32 | read-create | current |
| hpnicfIfQoSBindingRowStatus OBJECT-TYPE RowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.2 | RowStatus | read-create | current |
| hpnicfQoSTraStaObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11 | |||
| hpnicfQoSTraStaConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1 | |||
| hpnicfQoSIfTraStaConfigInfoTable OBJECT-TYPE A table of traffic statistics configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1 | not-accessible | current | |
| hpnicfQoSIfTraStaConfigInfoEntry OBJECT-TYPE An entry of interface traffic statistics configuration information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1 | not-accessible | current | |
| hpnicfQoSIfTraStaConfigDirection OBJECT-TYPE The direction of the traffic statistics. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.1 | Direction | not-accessible | current |
| hpnicfQoSIfTraStaConfigQueue OBJECT-TYPE The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.2 | OCTET STRING (SIZE(1)) | read-create | current |
| hpnicfQoSIfTraStaConfigDot1p OBJECT-TYPE The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.3 | OCTET STRING (SIZE(1)) | read-create | current |
| hpnicfQoSIfTraStaConfigDscp OBJECT-TYPE The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.4 | OCTET STRING (SIZE(8)) | read-create | current |
| hpnicfQoSIfTraStaConfigVlan OBJECT-TYPE The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.5 | OCTET STRING (SIZE(512)) | read-create | current |
| hpnicfQoSIfTraStaConfigStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.6 | RowStatus | read-create | current |
| hpnicfQoSTraStaRunGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2 | |||
| hpnicfQoSIfTraStaRunInfoTable OBJECT-TYPE A table of traffic statistics running information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1 | not-accessible | current | |
| hpnicfQoSIfTraStaRunInfoEntry OBJECT-TYPE An entry of interface traffic statistics running information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1 | not-accessible | current | |
| hpnicfQoSIfTraStaRunObjectType OBJECT-TYPE Type of statistics object. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.1 | INTEGER {queue(1), dot1p(2), dscp(3), vlanID(4)} | not-accessible | current |
| hpnicfQoSIfTraStaRunObjectValue OBJECT-TYPE Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094 | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.2 | Integer32 | not-accessible | current |
| hpnicfQoSIfTraStaRunDirection OBJECT-TYPE The direction of the traffic statistics. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.3 | Direction | not-accessible | current |
| hpnicfQoSIfTraStaRunPassPackets OBJECT-TYPE Number of passed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.4 | Counter64 | read-only | current |
| hpnicfQoSIfTraStaRunDropPackets OBJECT-TYPE Number of dropped packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.5 | Counter64 | read-only | current |
| hpnicfQoSIfTraStaRunPassBytes OBJECT-TYPE Number of passed bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.6 | Counter64 | read-only | current |
| hpnicfQoSIfTraStaRunDropBytes OBJECT-TYPE Number of dropped bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.7 | Counter64 | read-only | current |
| hpnicfQoSIfTraStaRunPassPPS OBJECT-TYPE PPS (packets per second) of passed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.8 | Counter64 | read-only | current |
| hpnicfQoSIfTraStaRunPassBPS OBJECT-TYPE BPS (bytes per second) of passed packets. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.9 | Counter64 | read-only | current |
| hpnicfQoSGlobalPriorityObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12 | |||
| hpnicfQoSRemarkTcpPortPriTable OBJECT-TYPE A table of remarking TCP port priority information. The priority field of all packets with the specified TCP port will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1 | not-accessible | current | |
| hpnicfQoSRemarkTcpPortPriEntry OBJECT-TYPE Remarking TCP port priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1 | not-accessible | current | |
| hpnicfQoSRemarkTcpPortStart OBJECT-TYPE Start value of TCP port range. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.1 | Integer32 (0..65535) | not-accessible | current |
| hpnicfQoSRemarkTcpPortEnd OBJECT-TYPE End value of TCP port range. It can not be less than start value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.2 | Integer32 (0..65535) | read-create | current |
| hpnicfQoSRemarkTcpPortType OBJECT-TYPE IPv4 packet, IPv6 packet, or all IP packet. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.3 | INTEGER {ipAll(1), ipv4(2), ipv6(3)} | read-create | current |
| hpnicfQoSRemarkTcpPortDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.4 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkTcpPortDscp OBJECT-TYPE DSCP value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.5 | Unsigned32 (0..63 | 255) | read-create | current |
| hpnicfQoSRemarkTcpPortRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.6 | RowStatus | read-create | current |
| hpnicfQoSRemarkUdpPortPriTable OBJECT-TYPE A table of remarking UDP port priority information. The priority field of all packets with the specified UDP port will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2 | not-accessible | current | |
| hpnicfQoSRemarkUdpPortPriEntry OBJECT-TYPE Remarking UDP port priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1 | not-accessible | current | |
| hpnicfQoSRemarkUdpPortStart OBJECT-TYPE Start value of UDP port range. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.1 | Integer32 (0..65535) | not-accessible | current |
| hpnicfQoSRemarkUdpPortEnd OBJECT-TYPE End value of UDP port range. It can not be less than start value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.2 | Integer32 (0..65535) | read-create | current |
| hpnicfQoSRemarkUdpPortType OBJECT-TYPE IPv4 packet, IPv6 packet, or all IP packet. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.3 | INTEGER {ipAll(1), ipv4(2), ipv6(3)} | read-create | current |
| hpnicfQoSRemarkUdpPortDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.4 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkUdpPortDscp OBJECT-TYPE DSCP value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.5 | Unsigned32 (0..63 | 255) | read-create | current |
| hpnicfQoSRemarkUdpPortRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.6 | RowStatus | read-create | current |
| hpnicfQoSRemarkIPv4AddrPriTable OBJECT-TYPE A table of remarking IPv4 address priority information. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3 | not-accessible | current | |
| hpnicfQoSRemarkIPv4AddrPriEntry OBJECT-TYPE Remarking IPv4 address priority information entry. The priority field of all IPv4 packets with the specified IP address will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1 | not-accessible | current | |
| hpnicfQoSRemarkIPv4AddrValue OBJECT-TYPE IPv4 address. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.1 | IpAddress | not-accessible | current |
| hpnicfQoSRemarkIPv4AddrMask OBJECT-TYPE Mask of IPv4 address. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.2 | IpAddress | read-create | current |
| hpnicfQoSRemarkIPv4AddrMaskLength OBJECT-TYPE Mask length of IPv4 address. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.3 | Unsigned32 (1..32 | 4294967295) | read-create | current |
| hpnicfQoSRemarkIPv4AddrDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.4 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkIPv4AddrDscp OBJECT-TYPE DSCP value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.5 | Unsigned32 (0..63 | 255) | read-create | current |
| hpnicfQoSRemarkIPv4AddrRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.6 | RowStatus | read-create | current |
| hpnicfQoSRemarkIPv6AddrPriTable OBJECT-TYPE A table of remarking IPv6 address priority information. The priority field of all IPv6 packets with the specified IP address will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4 | not-accessible | current | |
| hpnicfQoSRemarkIPv6AddrPriEntry OBJECT-TYPE Remarking IPv6 address priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1 | not-accessible | current | |
| hpnicfQoSRemarkIPv6AddrValue OBJECT-TYPE IPv6 address. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.1 | InetAddressIPv6 | not-accessible | current |
| hpnicfQoSRemarkIPv6AddrPrefixLength OBJECT-TYPE Prefix length of IPv6 address. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.2 | InetAddressPrefixLength | read-create | current |
| hpnicfQoSRemarkIPv6AddrDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.3 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkIPv6AddrDscp OBJECT-TYPE DSCP value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.4 | Unsigned32 (0..63 | 255) | read-create | current |
| hpnicfQoSRemarkIPv6AddrRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.5 | RowStatus | read-create | current |
| hpnicfQoSRemarkProtocolPriTable OBJECT-TYPE A table of remarking layer 3 protocol priority information. The 802.1p priority field of all packets of the specified protocol will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5 | not-accessible | current | |
| hpnicfQoSRemarkProtocolPriEntry OBJECT-TYPE Remarking layer 3 protocol priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1 | not-accessible | current | |
| hpnicfQoSRemarkProtocolValue OBJECT-TYPE Layer 3 protocol type. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.1 | INTEGER {ip(1), ipx(2), arp(3), appletalk(4), sna(5), netbeui(6)} | not-accessible | current |
| hpnicfQoSRemarkProtocolDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.2 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkProtocolRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.3 | RowStatus | read-create | current |
| hpnicfQoSRemarkVlanPriTable OBJECT-TYPE A table of remarking VLAN priority information. The priority field of all packets of the specified VLAN will be remarked to the configured value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6 | not-accessible | current | |
| hpnicfQoSRemarkVlanPriEntry OBJECT-TYPE Remarking VLAN priority information entry. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1 | not-accessible | current | |
| hpnicfQoSRemarkVlanStart OBJECT-TYPE Start VLAN ID. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.1 | Integer32 (1..4094) | not-accessible | current |
| hpnicfQoSRemarkVlanEnd OBJECT-TYPE End VLAN ID. It can not be less than start value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.2 | Integer32 (1..4094) | read-create | current |
| hpnicfQoSRemarkVlanDot1p OBJECT-TYPE Dot1p value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.3 | Unsigned32 (0..7 | 255) | read-create | current |
| hpnicfQoSRemarkVlanDscp OBJECT-TYPE DSCP value. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.4 | Unsigned32 (0..63 | 255) | read-create | current |
| hpnicfQoSRemarkVlanRowStatus OBJECT-TYPE Row status. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.5 | RowStatus | read-create | current |
| hpnicfQoSTypeOfServiceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7 | |||
| hpnicfQoSTypeOfServiceMode OBJECT-TYPE Global type of service. The type of service is disabled by default. When in ip-precedence mode, device uses ip-precedence value to determine the 802.1p priority of the packet and its outbound queue. When in DSCP mode, device uses DSCP value to determine the 802.1p priority of the packet and its outbound queue. | 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7.1 | INTEGER {disabled(1), ipPrecedence(2), dscp(3)} | read-write | current |