HPN-ICF-IF-EXT-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.40
- Last updated
- 2009-05-06 19:36
- Revisions
- 2009-05-06 19:36, 2004-11-13 19:36
- Namespace
- hp
- Source file
HPN-ICF-IF-EXT-MIB- Digest
sha256:569730a8b48729c25a9b6bd7da126d8cef552595e93f97a156a56aaa1db05b77
Description
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
Imports
| From | Symbols |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifDescr, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HCNUM-TC HPN-ICF-IF-EXT-MIB HPN-ICF-OID-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfIfExtScalarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.1 | |||
| hpnicfIfStatGlobalFlowInterval OBJECT-TYPE Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function. | 1.3.6.1.4.1.11.2.14.11.15.2.40.1.1 | Integer32 | read-write | current |
| hpnicfIfExtGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2 | |||
| hpnicfIfStat OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1 | |||
| hpnicfIfStatScalarGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.1 | |||
| hpnicfIfStatTable OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2 | |||
| hpnicfIfFlowStatTable OBJECT-TYPE This table contains objects to get statistic information of interfaces on a device. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1 | not-accessible | current | |
| hpnicfIfFlowStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1 | not-accessible | current | |
| hpnicfIfStatFlowInterval OBJECT-TYPE Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.1 | Integer32 | read-write | current |
| hpnicfIfStatFlowInBits OBJECT-TYPE In bits in the specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.2 | Unsigned32 | read-only | current |
| hpnicfIfStatFlowOutBits OBJECT-TYPE Out bits in specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.3 | Unsigned32 | read-only | current |
| hpnicfIfStatFlowInPkts OBJECT-TYPE In Packets in the specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.4 | Unsigned32 | read-only | current |
| hpnicfIfStatFlowOutPkts OBJECT-TYPE Out packets in the specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.5 | Unsigned32 | read-only | current |
| hpnicfIfStatFlowInBytes OBJECT-TYPE In bytes in the specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.6 | Unsigned32 | read-only | current |
| hpnicfIfStatFlowOutBytes OBJECT-TYPE Out bytes in the specific interval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.7 | Unsigned32 | read-only | current |
| hpnicfIfSpeedStatTable OBJECT-TYPE This table contains objects to get average speed information in the specific interval of interfaces on a device. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2 | not-accessible | current | |
| hpnicfIfSpeedStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1 | not-accessible | current | |
| hpnicfIfSpeedStatInterval OBJECT-TYPE Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.1 | Integer32 | read-write | current |
| hpnicfIfSpeedStatInPkts OBJECT-TYPE Average of input packets per second in the specific interval by hpnicfIfSpeedStatInterval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.2 | Unsigned32 | read-only | current |
| hpnicfIfSpeedStatOutPkts OBJECT-TYPE Average of output packets per second in the specific interval by hpnicfIfSpeedStatInterval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.3 | Unsigned32 | read-only | current |
| hpnicfIfSpeedStatInBytes OBJECT-TYPE Average of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.4 | Unsigned32 | read-only | current |
| hpnicfIfSpeedStatOutBytes OBJECT-TYPE Average of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.5 | Unsigned32 | read-only | current |
| hpnicfIfHCFlowStatTable OBJECT-TYPE This table contains objects to get statistic information of interfaces on a device. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3 | not-accessible | current | |
| hpnicfIfHCFlowStatEntry OBJECT-TYPE Entry items | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1 | not-accessible | current | |
| hpnicfIfStatFlowHCInBits OBJECT-TYPE In bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.1 | CounterBasedGauge64 | read-only | current |
| hpnicfIfStatFlowHCOutBits OBJECT-TYPE Out bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.2 | CounterBasedGauge64 | read-only | current |
| hpnicfIfStatFlowHCInPkts OBJECT-TYPE In Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.3 | CounterBasedGauge64 | read-only | current |
| hpnicfIfStatFlowHCOutPkts OBJECT-TYPE Out packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.4 | CounterBasedGauge64 | read-only | current |
| hpnicfIfStatFlowHCInBytes OBJECT-TYPE In bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.5 | CounterBasedGauge64 | read-only | current |
| hpnicfIfStatFlowHCOutBytes OBJECT-TYPE Out bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.6 | CounterBasedGauge64 | read-only | current |
| hpnicfIfControl OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2 | |||
| hpnicfRTParentIfTable OBJECT-TYPE This table contains all interfaces that can create sub interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1 | not-accessible | current | |
| hpnicfRTParentIfEntry OBJECT-TYPE This entry describes a interface that can create sub interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1 | not-accessible | current | |
| hpnicfRTParentIfIndex OBJECT-TYPE The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.1 | Integer32 | not-accessible | current |
| hpnicfRTMinSubIfOrdinal OBJECT-TYPE The minimum ordinal of the sub interface can be created. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.2 | Integer32 | read-only | current |
| hpnicfRTMaxSubIfOrdinal OBJECT-TYPE The max ordinal of the sub interface can be created. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.3 | Integer32 | read-only | current |
| hpnicfRTSubIfTable OBJECT-TYPE This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfIndex and the hpnicfRTSubIfOrdinal must be in the range between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface from hpnicfRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2 | not-accessible | current | |
| hpnicfRTSubIfEntry OBJECT-TYPE The hpnicfRTSubIfTable entry items | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1 | not-accessible | current | |
| hpnicfRTSubIfParentIfIndex OBJECT-TYPE The parent interface index. The value should be the same as the hpnicfRTParentIfIndex. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.1 | Integer32 | not-accessible | current |
| hpnicfRTSubIfOrdinal OBJECT-TYPE The ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.2 | Integer32 | not-accessible | current |
| hpnicfRTSubIfSubIfIndex OBJECT-TYPE The ifIndex value of the sub interface | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.3 | Integer32 | read-only | current |
| hpnicfRTSubIfSubIfDesc OBJECT-TYPE The name of the interface | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.4 | DisplayString (SIZE(0..255)) | read-only | current |
| hpnicfRTSubIfRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.5 | RowStatus | read-create | current |
| hpnicfIfLinkModeTable OBJECT-TYPE This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3 | not-accessible | current | |
| hpnicfIfLinkModeEntry OBJECT-TYPE The interface link mode table entry | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1 | not-accessible | current | |
| hpnicfIfLinkModeIndex OBJECT-TYPE The value is same as ifIndex. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.1 | Integer32 | not-accessible | current |
| hpnicfIfLinkMode OBJECT-TYPE The current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.2 | INTEGER {bridgeMode(1), routeMode(2)} | read-write | current |
| hpnicfIfLinkModeSwitchSupport OBJECT-TYPE Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.3 | TruthValue | read-only | current |
| hpnicfIfInterfaces OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3 | |||
| hpnicfIfPhysicalNumber OBJECT-TYPE Represents the number of physical interfaces in the device. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.1 | Integer32 | read-only | current |
| hpnicfIfTable OBJECT-TYPE A list of interface entries. The number of entries is given by the value of IfNumber. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2 | not-accessible | current | |
| hpnicfIfEntry OBJECT-TYPE An entry containing management information applicable to a particular interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1 | not-accessible | current | |
| hpnicfIfUpDownTimes OBJECT-TYPE The interface's up/down times, since the device was initialized. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.1 | Integer32 | read-only | current |
| hpnicfIfMtu OBJECT-TYPE The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.2 | Integer32 | read-write | current |
| hpnicfIfBandwidthRate OBJECT-TYPE The rate of the bandwidth for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.3 | Integer32 (0..100) | read-only | current |
| hpnicfIfDiscardPktRate OBJECT-TYPE The rate of the discarded packets for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.4 | Integer32 (0..100) | read-only | current |
| hpnicfIfStatusKeepTime OBJECT-TYPE The time since the interface entered its current operational state. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.5 | TimeTicks | read-only | current |
| hpnicfIfInNUcastPkts OBJECT-TYPE The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.6 | Counter64 | read-only | current |
| hpnicfIfOutNUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.7 | Counter64 | read-only | current |
| hpnicfIfIsPoe OBJECT-TYPE Whether the interface supports poe. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.8 | TruthValue | read-only | current |
| hpnicfIfOperStatus OBJECT-TYPE Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. If ifAdminStatus is changed to up, hpnicfIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.9 | INTEGER {up(1), down(2), testing(3), admindown(4)} | read-only | current |
| hpnicfIfDownTimes OBJECT-TYPE Number of times the interface went down, since the device was initialized. | 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.10 | Integer32 | read-only | current |
| hpnicfIfExtTrap OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.3 | |||
| hpnicfIfExtTrapPrex OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0 | |||
| hpnicfIfExtTrapObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1 | |||
| hpnicfIfExtTrapCfgTable OBJECT-TYPE The trap configuration table. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1 | not-accessible | current | |
| hpnicfIfExtTrapCfgEntry OBJECT-TYPE An entry for this table. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1 | not-accessible | current | |
| hpnicfIfBandwidthUpperLimit OBJECT-TYPE The rate of the bandwidth upper limit for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.1 | Integer32 (1..100) | read-write | current |
| hpnicfIfDiscardPktRateUpperLimit OBJECT-TYPE The rate of the discarded packets upper limit for an interface. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.2 | Integer32 (1..100) | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfIfBandwidthUsageHigh NOTIFICATION-TYPE The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.1 | current |
| hpnicfIfDiscardPktRateHigh NOTIFICATION-TYPE The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. | 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.2 | current |