HPN-ICF-DOT11-WLANEXT-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.75.7
- Last updated
- 2007-06-08 20:00
- Revisions
- 2007-06-08 20:00
- Namespace
- hp
- Source file
HPN-ICF-DOT11-WLANEXT-MIB- Digest
sha256:1123bc7adb5febbf20bf3c745e9b0bc37d1186d1e6202f7f0f58a0368d4091b6
Description
This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-DOT11-REF-MIB | HpnicfDot11ObjectIDType, HpnicfDot11QosAcType, HpnicfDot11RadioScopeType, hpnicfDot11 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-DOT11-REF-MIB HPN-ICF-DOT11-WLANEXT-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfDot11RFGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1 | |||
| hpnicfDot11RFSignalStatisTable OBJECT-TYPE The table will describe statistic information of signal strength for AP radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1 | not-accessible | current | |
| hpnicfDot11RFSignalStatisEntry OBJECT-TYPE Each entry contains the signal of each signal strength information of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1 | not-accessible | current | |
| hpnicfDot11RFAPID OBJECT-TYPE To identify each AP, and AP is running status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.1 | HpnicfDot11ObjectIDType | not-accessible | current |
| hpnicfDot11RFRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.2 | HpnicfDot11RadioScopeType | not-accessible | current |
| hpnicfDot11RFSignalStatisInterv OBJECT-TYPE Represents the interval of statistic. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.3 | Integer32 | read-only | current |
| hpnicfDot11RFAverageSignalStrength OBJECT-TYPE Represents the average value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.4 | Integer32 | read-only | current |
| hpnicfDot11RFMaxSignalStrength OBJECT-TYPE Represents the maximum value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.5 | Integer32 | read-only | current |
| hpnicfDot11RFMinSignalStrength OBJECT-TYPE Represents the minimum value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.6 | Integer32 | read-only | current |
| hpnicfDot11QosGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2 | |||
| hpnicfDot11QosStatisTable OBJECT-TYPE The table defines the attributes for the Qos feature of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1 | not-accessible | current | |
| hpnicfDot11QosStatisEntry OBJECT-TYPE Each entry contains information of the Qos attribute of each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1 | not-accessible | current | |
| hpnicfDot11QosAPID OBJECT-TYPE To uniquely identify a AP in running status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.1 | HpnicfDot11ObjectIDType | not-accessible | current |
| hpnicfDot11QosRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.2 | HpnicfDot11RadioScopeType | not-accessible | current |
| hpnicfDot11QosAverageQueLen OBJECT-TYPE The average frame numbers to be sent out in the queue. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.3 | Integer32 | read-only | current |
| hpnicfDot11QosDropFrameRatio OBJECT-TYPE The ratio of dropped frames in a minute because of full queue. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.4 | Integer32 | read-only | current |
| hpnicfDot11QosAverageDataRate OBJECT-TYPE The average transmit data rate of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.5 | Integer32 | read-only | current |
| hpnicfDot11QosAcStatisTable OBJECT-TYPE The table defines the parameters for Qos access category. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2 | not-accessible | current | |
| hpnicfDot11QosAcStatisEntry OBJECT-TYPE Each entry contains information of each Qos access category. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1 | not-accessible | current | |
| hpnicfDot11QosAcType OBJECT-TYPE The access category type. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.1 | HpnicfDot11QosAcType | not-accessible | current |
| hpnicfDot11AcDropFrameCnt OBJECT-TYPE The number of dropped frames in a minute for one specific access category because of full queue. | 1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.2 | Counter32 | read-only | current |