HPN-ICF-DOT11-STATION-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.75.3
- Last updated
- 2010-09-02 18:00
- Revisions
- 2010-09-02 18:00, 2010-02-23 18:00, 2009-12-01 18:00, 2009-08-07 18:00, 2009-07-29 18:00, 2009-05-07 20:00, 2008-11-07 17:30, 2008-02-25 18:00, 2007-12-21 18:00, 2007-06-21 20:00, 2007-04-27 20:00, 2006-05-10 16:00
- Namespace
- hp
- Source file
HPN-ICF-DOT11-STATION-MIB- Digest
sha256:97c9fdc3d5c1834e8dbac70c7f1e67ec58583aecde650275248c89fbbe037d04
Description
This MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. station (Client Station) A wireless device in a wireless network associated with an access point. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. RSSI It is the received signal strength indication. It suggests the quality of received signal. RTS Request to Send, it is used to gain control of the medium for the transmission of 'large' frames, in which 'large' is defined by the RTS threshold in the network card driver. CTS Clear to Send, it is used to answer RTS frames. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-DOT11-REF-MIB | HpnicfDot11AKMType, HpnicfDot11AssocFailType, HpnicfDot11AuthenType, HpnicfDot11AuthorFailType, HpnicfDot11ChannelScopeType, HpnicfDot11CipherType, HpnicfDot11ObjectIDType, HpnicfDot11RadioScopeType, HpnicfDot11RadioType, HpnicfDot11RadioType2, HpnicfDot11SSIDEncryptModeType, HpnicfDot11SSIDStringType, HpnicfDot11SecIEStatusType, hpnicfDot11 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-DOT11-REF-MIB HPN-ICF-DOT11-STATION-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfDot11StationMtGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1 | |||
| hpnicfDot11StationAssociateTable OBJECT-TYPE This table contains the information of stations which are associating with the wireless network (current AC). | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1 | not-accessible | current | |
| hpnicfDot11StationAssociateEntry OBJECT-TYPE Each entry contains association information of each station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1 | not-accessible | current | |
| hpnicfDot11StationMAC OBJECT-TYPE Represents the unique MAC Address of station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.1 | MacAddress | not-accessible | current |
| hpnicfDot11StationIPAddress OBJECT-TYPE Represents the IP address of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.2 | IpAddress | read-only | current |
| hpnicfDot11StationUserName OBJECT-TYPE Represents the user name of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.3 | OCTET STRING | read-only | current |
| hpnicfDot11StationTxRateSet OBJECT-TYPE Represents the current transmit data rates for this station. Each byte will represent one rate. If the MSB(Most significant bit) is set, then this rate is a mandantory rate. Otherwise, it is optional. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.4 | OCTET STRING | read-only | current |
| hpnicfDot11StationUpTime OBJECT-TYPE The time in seconds, how long this station has been associated with this device. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.5 | Unsigned32 | read-only | current |
| hpnicfDot11StationSignalStrength OBJECT-TYPE Represents a device-dependent measure of the signal strength of latest packet received from this station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.6 | Integer32 | read-only | current |
| hpnicfDot11StationRSSI OBJECT-TYPE Represents a device-dependent measure of the RSSI. It is the received signal strength indication. The maximum value is defined by chip set vendors | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.7 | Integer32 | read-only | current |
| hpnicfDot11StationChannel OBJECT-TYPE Represents current radio channel used by station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.8 | HpnicfDot11ChannelScopeType | read-only | current |
| hpnicfDot11StationPowerSaveMode OBJECT-TYPE Represents the power management mode of this station. The following values are supported: active - This station is not in power-save mode and it is actively sending or receiving data. powersave - This station is in power-save mode and it wakes up after sometime to check for buffer data. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.9 | INTEGER {active(1), powersave(2)} | read-only | current |
| hpnicfDot11StationAid OBJECT-TYPE Represents the association identification number of station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.10 | Integer32 | read-only | current |
| hpnicfDot11StationVlanId OBJECT-TYPE Represents Vlan ID to which the station is associated. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.11 | Integer32 | read-only | current |
| hpnicfDot11StationSSIDName OBJECT-TYPE Represents the ESS name. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.12 | HpnicfDot11SSIDStringType | read-only | current |
| hpnicfDot11StationAuthenMode OBJECT-TYPE Represents the Authentication mode defined by 802.11. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.13 | HpnicfDot11AuthenType | read-only | current |
| hpnicfDot11StationAKMMode OBJECT-TYPE Represents the key management mode defined by 802.11i. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.14 | HpnicfDot11AKMType | read-only | current |
| hpnicfDot11StationSecurityCiphers OBJECT-TYPE Represents the frame encryption cipher type used by station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.15 | HpnicfDot11CipherType | read-only | current |
| hpnicfDot11StationSSIDEncryptMode OBJECT-TYPE Represents the encryption mode for this ESS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.16 | HpnicfDot11SSIDEncryptModeType | read-only | current |
| hpnicfDot11StationRxSNR OBJECT-TYPE Represents the signal and noise strength ratio of frame reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.17 | Integer32 | read-only | current |
| hpnicfDot11StationTxRate OBJECT-TYPE Represents the transmission rate of frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.18 | Integer32 | read-only | current |
| hpnicfDot11StationRxRate OBJECT-TYPE Represents the reception rate of frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.19 | Integer32 | read-only | current |
| hpnicfDot11StationVendorName OBJECT-TYPE Represents the vendor name of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.20 | OCTET STRING (SIZE(0..127)) | read-only | current |
| hpnicfDot11StationRadioMode OBJECT-TYPE Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a station,it could support only one radio type at the same time. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.21 | HpnicfDot11RadioType | read-only | current |
| hpnicfDot11StationRxNoise OBJECT-TYPE Represents the received noise of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.22 | Integer32 | read-only | current |
| hpnicfDot11StationMACAddress OBJECT-TYPE Represents MAC Address of station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.23 | MacAddress | read-only | current |
| hpnicfDot11StationTxSpeed OBJECT-TYPE Represents the bytes of transmitted data frames to the station per second in sample interval. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.24 | Integer32 | read-only | current |
| hpnicfDot11StationRxSpeed OBJECT-TYPE Represents the bytes of received data frames from the station per second in sample interval. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.25 | Integer32 | read-only | current |
| hpnicfDot11StationWmmMode OBJECT-TYPE Represents the QoS mode of station. The following values are supported: wmm - This QoS function is supported by this station. nonwmm - This QoS function is not supported by this station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.26 | INTEGER {wmm(1), nonwmm(2)} | read-only | current |
| hpnicfDot11StationSecIEStatus OBJECT-TYPE Represents the security Information element for this station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.27 | HpnicfDot11SecIEStatusType | read-only | current |
| hpnicfDot11StationUpTimeTicks OBJECT-TYPE Represents how long this station has been associated with this device. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.28 | TimeTicks | read-only | current |
| hpnicfDot11StationRadioMode2 OBJECT-TYPE Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a station,it could support only one radio type at the same time. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.29 | HpnicfDot11RadioType2 | read-only | current |
| hpnicfDot11StationAssTime OBJECT-TYPE Represents the time at which the station connected. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.30 | DateAndTime | read-only | current |
| hpnicfDot11StationUserAuthType OBJECT-TYPE Represents the type of user authentication with this station. portalAuth - The authentication lunched by portal pop-up program which is need input username and passward,exclude MAC authentication. authFree - There is no need others authentiaction,user will surf internet after association. associateAuth - Include WEP PSK 802.1X authentication. macAuth - MAC Authentication apply with access device, a Remote Authentication Dial-In User Service (RADIUS) server or message netgate to realize fast authentication. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.31 | INTEGER {portalAuth(1), authFree(2), associateAuth(3), macAuth(4)} | read-only | current |
| hpnicfDot11StationRfPingTest OBJECT-TYPE This object is used to start rfping test of the station. It will return false for get operation. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.32 | TruthValue | read-write | current |
| hpnicfDot11StationMaxRate OBJECT-TYPE Represents the max negotiation rate of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.33 | Integer32 | read-only | current |
| hpnicfDot11StationPowerSaveModeCM OBJECT-TYPE Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.34 | INTEGER {active(0), powersave(1)} | read-only | current |
| hpnicfDot11StationAuthenModeCM OBJECT-TYPE Represents the authentication mode defined by 802.11. The following values are supported: opensystem - Do not authenticate. sharedkey - System will use challenge message to authenticate the client. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.35 | INTEGER {opensystem(0), sharedkey(1)} | read-only | current |
| hpnicfDot11StationAKMModeCM OBJECT-TYPE Represents the key management mode defined by 802.11i. The following values are supported: none - no key management mode configured, psk - pre-shared key authentication, radius - 802.1x authentication, wlanex - wlanex. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.36 | INTEGER {none(0), psk(1), radius(2), wlanex(3)} | read-only | current |
| hpnicfDot11StationSecurityCiphersCM OBJECT-TYPE Represents the frame encryption cipher type used by station. The following values are supported: none - clear text or no cipher method is configure, wep40 - 40-bit WEP key, wep104 - 104-bit WEP key, tkip - WPA Temporal Key encryption, aesccmp - WPA AES CCMP encryption, wpisms4 - ext encryption. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.37 | INTEGER {none(0), wep40(1), wep104(2), tkip(3), aesccmp(4), wpisms4(5)} | read-only | current |
| hpnicfDot11StationSecIEStatusCM OBJECT-TYPE Represents the security Information element for this station. The following values are supported: none - both wpa and wpa2 are disabled, wpa - only enable wpa, wpa2 - only enable wpa2, wlanex - only enable wlanex. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38 | INTEGER {none(0), wpa(1), wpa2(2), wlanex(3)} | read-only | current |
| hpnicfDot11StationAPRelationTable OBJECT-TYPE This table contains relation-ship between station, AP, Radio and WLANID, and the detailed information of station is kept in the hpnicfDot11StaAssociateTable table. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2 | not-accessible | current | |
| hpnicfDot11StationAPRelationEntry OBJECT-TYPE Each entry contains relation-ship information with AP, Radio and WLANID of each station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1 | not-accessible | current | |
| hpnicfDot11CurrAPID OBJECT-TYPE To uniquely identify each AP, and relation-ship between hpnicfDot11CurrAPID and AP device will be static. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.1 | HpnicfDot11ObjectIDType | read-only | current |
| hpnicfDot11CurrRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.2 | HpnicfDot11RadioScopeType | read-only | current |
| hpnicfDot11CurrWlanID OBJECT-TYPE Represents WLAN ID of the BSS the station associated to. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.3 | Integer32 | read-only | current |
| hpnicfDot11CurrAntennaID OBJECT-TYPE Represents Antenna ID of the station associated to. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.4 | Integer32 | read-only | current |
| hpnicfDot11StationStatisTable OBJECT-TYPE This table contains statistics and status of all stations in the hpnicfDot11StaAssociateTable. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3 | not-accessible | current | |
| hpnicfDot11StationStatisEntry OBJECT-TYPE This entry contains statistics and status for each station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1 | not-accessible | current | |
| hpnicfDot11StationRxFrameCnt OBJECT-TYPE Represents the count of frames that are received by AP from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.1 | Counter32 | read-only | current |
| hpnicfDot11StationTxFrameCnt OBJECT-TYPE Represents the count of frames that are sent to station from AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.2 | Counter32 | read-only | current |
| hpnicfDot11StationDropFrameCnt OBJECT-TYPE Represents the count of frames that are dropped. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.3 | Counter32 | read-only | current |
| hpnicfDot11StationRxFrameBytes OBJECT-TYPE Represents the count of bytes that are received by AP from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.4 | Counter64 | read-only | current |
| hpnicfDot11StationTxFrameBytes OBJECT-TYPE Represents the count of bytes that are sent to station from AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.5 | Counter64 | read-only | current |
| hpnicfDot11StationDropFrameBytes OBJECT-TYPE Represents how many bytes are dropped. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.6 | Counter64 | read-only | current |
| hpnicfDot11StationRxRetryPkts OBJECT-TYPE Represents the count of frames that are retransmitted to AP from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.7 | Counter32 | read-only | current |
| hpnicfDot11StationTxRetryPkts OBJECT-TYPE Represents the count of frames that are retransmitted to station from AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.8 | Counter32 | read-only | current |
| hpnicfDot11StationRxRetryBytes OBJECT-TYPE Represents the count of bytes that are retransmitted to AP from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.9 | Counter64 | read-only | current |
| hpnicfDot11StationTxRetryBytes OBJECT-TYPE Represents the count of bytes that are retransmitted to station from AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.10 | Counter64 | read-only | current |
| hpnicfDot11StationThroughput OBJECT-TYPE Represents how many payload bytes of data frame are sent and received by station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.11 | Counter64 | read-only | current |
| hpnicfDot11StationSuccessTxCnt OBJECT-TYPE Represents how many frames have been successfully sent to station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.12 | Counter32 | read-only | current |
| hpnicfDot11StationSuccessTxDataCnt OBJECT-TYPE Represents how many data frames have been successfully sent to station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.13 | Counter32 | read-only | current |
| hpnicfDot11StationRxDataFrameCnt OBJECT-TYPE Represents how many data frames have been received from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.14 | Counter32 | read-only | current |
| hpnicfDot11StationTxDataFrameCnt OBJECT-TYPE Represents how many data frames have been sent to station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.15 | Counter32 | read-only | current |
| hpnicfDot11StationRxDataFrameBytes OBJECT-TYPE Represents how many bytes of data frames have been received from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.16 | Counter64 | read-only | current |
| hpnicfDot11StationTxDataFrameBytes OBJECT-TYPE Represents how many bytes of data frames have been sent to station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.17 | Counter64 | read-only | current |
| hpnicfDot11StationRxFragCnt OBJECT-TYPE Represents the number of fragmented data frames that received from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.18 | Counter32 | read-only | current |
| hpnicfDot11StaRxErrDataFrameCnt OBJECT-TYPE Represents the count of error data frames that are received by AP from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.19 | Counter64 | read-only | current |
| hpnicfDot11StaTxRetryDataFrameCnt OBJECT-TYPE Represents the count of data frames that are retransmitted to station from AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.20 | Counter64 | read-only | current |
| hpnicfDot11StaTxDataRatePkts OBJECT-TYPE Represents how many data frames of each rate have been received from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.21 | OCTET STRING | read-only | current |
| hpnicfDot11StaRxDataRatePkts OBJECT-TYPE Represents how many data frames of each rate have been sent to station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.22 | OCTET STRING | read-only | current |
| hpnicfDot11StaTxSignalStrengthPkts OBJECT-TYPE Represents how many data frames of different signal strength have been received from station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.23 | OCTET STRING | read-only | current |
| hpnicfDot11StationRfPingTable OBJECT-TYPE This table contains statistics of all stations in the hpnicfDot11StationRfPingTable. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4 | not-accessible | current | |
| hpnicfDot11StationRfPingEntry OBJECT-TYPE This entry contains statistics for each station's RfPing results. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1 | not-accessible | current | |
| hpnicfDot11StationRfPingIndex OBJECT-TYPE Represents the rate index for the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.1 | Integer32 (0..214783647) | not-accessible | current |
| hpnicfDot11StationRfPingRate OBJECT-TYPE Represents the rate at which the radio interface sends wireless ping frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.2 | OCTET STRING | read-only | current |
| hpnicfDot11StationRfPingTxCnt OBJECT-TYPE Represents the number of wireless ping frames that the radio interface sent. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.3 | Integer32 | read-only | current |
| hpnicfDot11StationRfPingRxCnt OBJECT-TYPE Represents the number of wireless ping frames that the radio interface received from the client. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.4 | Integer32 | read-only | current |
| hpnicfDot11StationRfPingRssi OBJECT-TYPE Represents the client signal strength detected by the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.5 | Integer32 | read-only | current |
| hpnicfDot11StationRfPingRetries OBJECT-TYPE Represents the total number of retransmitted ping frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.6 | Integer32 | read-only | current |
| hpnicfDot11StationRfPingRtt OBJECT-TYPE Round-trip time (RTT) from the time when the radio interface send a ping packet to the time when it receives a response from the client. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.7 | Integer32 | read-only | current |
| hpnicfDot11StationNotifyGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2 | |||
| hpnicfDot11StationTraps OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0 | |||
| hpnicfDot11StationTrapVarObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1 | |||
| hpnicfDot11StationTrapBSSID OBJECT-TYPE Represents on which BSSID of AP the event happened. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.1 | MacAddress | accessible-for-notify | current |
| hpnicfDot11StationTrapStaMAC OBJECT-TYPE Represents the MAC address of station which happened message integrity check (MIC) errors. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.2 | MacAddress | accessible-for-notify | current |
| hpnicfDot11StationSessionStartTime OBJECT-TYPE Represents the time at which the station connected. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.3 | DateAndTime | accessible-for-notify | current |
| hpnicfDot11StationAssocFailCause OBJECT-TYPE Represents the cause of the station association failure. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.4 | HpnicfDot11AssocFailType | accessible-for-notify | current |
| hpnicfDot11StationAuthorFailCause OBJECT-TYPE Represents the cause of the station authorization failure. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.5 | HpnicfDot11AuthorFailType | accessible-for-notify | current |
| hpnicfDot11StationFailCauseDesc OBJECT-TYPE Represents the failure description of the station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.6 | OCTET STRING (SIZE(0..255)) | accessible-for-notify | current |
| hpnicfDot11StationSessionDuration OBJECT-TYPE Represents the duration of the station sesssion. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.7 | Unsigned32 | accessible-for-notify | current |
| hpnicfDot11StationRoamingTime OBJECT-TYPE Represents the time at which the station roamed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.8 | Unsigned32 | accessible-for-notify | current |
| hpnicfDot11StationACIPAddress OBJECT-TYPE For roam-in station, it represents the ip address of home AC. For roam-out station, it represents the ip address of foreign AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.9 | IpAddress | accessible-for-notify | current |
| hpnicfDot11StationAPName OBJECT-TYPE Name of the AP which the station connects to. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.10 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11StationBSSID OBJECT-TYPE BSSID which the station connects to. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.11 | MacAddress | accessible-for-notify | current |
| hpnicfDot11StaDisconnectReason OBJECT-TYPE Reason why the station disconnects with the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.12 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11StationAuthMode OBJECT-TYPE Represents station's authentication mode. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.13 | INTEGER {opensystem(1), sharedkey(2)} | accessible-for-notify | current |
| hpnicfDot11StationACIPv6Add OBJECT-TYPE For roam-in station, it represents the IPv6 address of home AC. For roam-out station, it represents the IPv6 address of foreign AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.14 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11UserName OBJECT-TYPE Represents the user name. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.15 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11StationTrapAPMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.16 | MacAddress | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfDot11StationMICErrorTrap NOTIFICATION-TYPE This notification is to indicate the occurrence of a MIC failure in a certain station. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.1 | current |
| hpnicfDot11StationAuthenErrorTrap NOTIFICATION-TYPE This notification is to indicate which station happened authentication failure. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.2 | current |
| hpnicfDot11StationAuthorFailTrap NOTIFICATION-TYPE This trap is sent if a station authorization fails. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.3 | current |
| hpnicfDot11StationAssocFailTrap NOTIFICATION-TYPE This trap is sent if a station association fails. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.4 | current |
| hpnicfDot11StationDeAssocTrap NOTIFICATION-TYPE This trap is sent if a station de-association occurred. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.5 | current |
| hpnicfDot11StationAuthorSuccTrap NOTIFICATION-TYPE This trap is sent when a station is authorized successfully. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.6 | current |
| hpnicfDot11StationRoamingTrap NOTIFICATION-TYPE This trap is sent when a station roamed successfully. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.7 | current |
| hpnicfDot11StationDisconnectTrap NOTIFICATION-TYPE This notification is sent when station disconnects with AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.8 | current |
| hpnicfDot11UserDisconnectTrap NOTIFICATION-TYPE This notification is sent when user disconnects with AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.9 | current |