MIBs Depot

HPN-ICF-DOT11-SA-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.75.13
Last updated
2011-08-26 20:00
Revisions
2011-08-26 20:00
Namespace
hp
Source file
HPN-ICF-DOT11-SA-MIB
Digest
sha256:0485e37f3f4c4a6c1171d2f1da3a53650a34951131cddf27a85985aed10c1c95

Description

This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.

Imports

FromSymbols
HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeType, HpnicfDot11ObjectIDType, HpnicfDot11RadioScopeType, HpnicfDot11SaIntfDevType, hpnicfDot11
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-DOT11-REF-MIB
HPN-ICF-DOT11-SA-MIB
HPN-ICF-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfDot11SaCfgGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1
hpnicfDot11SaCfgTable
OBJECT-TYPE
This table is used to configure spectrum analysis.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1not-accessiblecurrent
hpnicfDot11SaCfgEntry
OBJECT-TYPE
This entry contains the spectrum analysis configuration.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1not-accessiblecurrent
hpnicfDot11SaCfgRadioType
OBJECT-TYPE
Represents the radio type of the configuration.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.1INTEGER {dot11bg(1), dot11a(2)}not-accessiblecurrent
hpnicfDot11SaEnable
OBJECT-TYPE
Represents whether spectrum analysis is enabled globally.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.2TruthValueread-writecurrent
hpnicfDot11SaRptDevType
OBJECT-TYPE
Represents which types of interference devices should be reported.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.3Bits {microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11)}read-writecurrent
hpnicfDot11SaTrapDevEnable
OBJECT-TYPE
Represents whether the interference device trap is enabled.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.4TruthValueread-writecurrent
hpnicfDot11SaTrapDevType
OBJECT-TYPE
Represents which types of interference device will send traps when the interference device trap is enabled.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.5Bits {microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11)}read-writecurrent
hpnicfDot11SaTrapAQEnable
OBJECT-TYPE
Represents whether the air quality trap is enabled.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.6TruthValueread-writecurrent
hpnicfDot11SaTrapAQThreshold
OBJECT-TYPE
Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.7Integer32 (1..100)read-writecurrent
hpnicfDot11SaDrivenRRMEnable
OBJECT-TYPE
Configure whether to trigger RRM to run when an access point detects a certain level of interference.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.8TruthValueread-writecurrent
hpnicfDot11SaDrivenRRMSnt
OBJECT-TYPE
Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9INTEGER {low(1), medium(2), high(3)}read-writecurrent
hpnicfDot11SaStatusGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2
hpnicfDot11SaRtFFTDataTable
OBJECT-TYPE
This table contains the real-time FFT data for spectrum analysis.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1not-accessiblecurrent
hpnicfDot11SaRtFFTDataEntry
OBJECT-TYPE
This entry contains the real-time FFT data for spectrum analysis.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1not-accessiblecurrent
hpnicfDot11SaAPID
OBJECT-TYPE
Represents the serial ID of the AP.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.1HpnicfDot11ObjectIDTypenot-accessiblecurrent
hpnicfDot11SaRadioID
OBJECT-TYPE
Represents the ID of the radio.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.2HpnicfDot11RadioScopeTypenot-accessiblecurrent
hpnicfDot11SaRtDataGroupID
OBJECT-TYPE
Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.3Integer32not-accessiblecurrent
hpnicfDot11SaFrequency
OBJECT-TYPE
Represents the frequency number in 100 Hz.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.4Integer32not-accessiblecurrent
hpnicfDot11SaRtFreqPower
OBJECT-TYPE
Represents the power of the frequency point.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.5Integer32read-onlycurrent
hpnicfDot11SaRtFreqMaxPower
OBJECT-TYPE
Represents the max power of the frequency point.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.6Integer32read-onlycurrent
hpnicfDot11SaRtFreqDutyCycle
OBJECT-TYPE
Represents the duty cycle of the frequency point.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.7Integer32read-onlycurrent
hpnicfDot11SaRtFreqDataSeqNo
OBJECT-TYPE
Represents the sequence number of the data.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.8Unsigned32read-onlycurrent
hpnicfDot11SaIntfDevTable
OBJECT-TYPE
This table contains the information of the interfering devices.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2not-accessiblecurrent
hpnicfDot11SaIntfDevEntry
OBJECT-TYPE
This entry contains the information of the interfering devices.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1not-accessiblecurrent
hpnicfDot11SaDevID
OBJECT-TYPE
Represents the device identification number that uniquely identified the interfering device.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.1Integer32not-accessiblecurrent
hpnicfDot11SaDevType
OBJECT-TYPE
Represents type of the interferer.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.2HpnicfDot11SaIntfDevTyperead-onlycurrent
hpnicfDot11SaDevSI
OBJECT-TYPE
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.3Integer32read-onlycurrent
hpnicfDot11SaDevRSSI
OBJECT-TYPE
Represents receive signal strength indicator (RSSI) of interfering device.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.4Integer32read-onlycurrent
hpnicfDot11SaDevDutyCycle
OBJECT-TYPE
Represents proportion of time in percentage during which the interfering device was active.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.5Integer32read-onlycurrent
hpnicfDot11SaDevAffectedChls
OBJECT-TYPE
Represents channels that the interfering device affects.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.6OCTET STRINGread-onlycurrent
hpnicfDot11SaDevDetectedTime
OBJECT-TYPE
Represents time at which the interference was detected.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.7DateAndTimeread-onlycurrent
hpnicfDot11SaAirQualityTable
OBJECT-TYPE
This table contains the air quality of the channels.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3not-accessiblecurrent
hpnicfDot11SaAirQualityEntry
OBJECT-TYPE
This entry contains the air quality of the channels.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1not-accessiblecurrent
hpnicfDot11SaChlNum
OBJECT-TYPE
Represents the radio channel where the air quality is monitored.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.1HpnicfDot11ChannelScopeTypenot-accessiblecurrent
hpnicfDot11SaAvgQuality
OBJECT-TYPE
Represents the average air quality for this radio channel.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.2Integer32read-onlycurrent
hpnicfDot11SaMinQuality
OBJECT-TYPE
Represents the minimum air quality for this radio channel.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.3Integer32read-onlycurrent
hpnicfDot11SaIntfDevNum
OBJECT-TYPE
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.4Integer32read-onlycurrent
hpnicfDot11SaWiFiUtil
OBJECT-TYPE
Represents the percentage of the channel currently being used by Wi-Fi devices.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.5Integer32read-onlycurrent
hpnicfDot11SaNonWiFiUtil
OBJECT-TYPE
Represents the percentage of the channel currently being used by non-Wi-Fi interference.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.6Integer32read-onlycurrent
hpnicfDot11SaNoiseFloor
OBJECT-TYPE
Represents current noise floor recorded on the channel.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.7Integer32read-onlycurrent
hpnicfDot11SaNotifyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3
hpnicfDot11SaTraps
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0
hpnicfDot11SaTrapVars
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1
hpnicfDot11SaTrapAPID
OBJECT-TYPE
Represents the identifier of the AP.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.1HpnicfDot11ObjectIDTypeaccessible-for-notifycurrent
hpnicfDot11SaTrapRadioID
OBJECT-TYPE
Represents the identifier of the radio.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.2HpnicfDot11RadioScopeTypeaccessible-for-notifycurrent
hpnicfDot11SaTrapDevID
OBJECT-TYPE
Represents the device identification number that uniquely identified the interfering device.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.3Integer32accessible-for-notifycurrent
hpnicfDot11SaTrapIntfDevType
OBJECT-TYPE
Represents type of the interferer.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.4HpnicfDot11SaIntfDevTypeaccessible-for-notifycurrent
hpnicfDot11APTrapDevSI
OBJECT-TYPE
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.5Integer32accessible-for-notifycurrent
hpnicfDot11SaTrapDevRSSI
OBJECT-TYPE
Represents receive signal strength indicator (RSSI) of interfering device.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.6Integer32accessible-for-notifycurrent
hpnicfDot11APTrapDevDC
OBJECT-TYPE
Represents proportion of time in percentage during which the interfering device was active.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.7Integer32accessible-for-notifycurrent
hpnicfDot11APTrapDevChls
OBJECT-TYPE
Represents channels that the interfering device affects.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.8OCTET STRINGaccessible-for-notifycurrent
hpnicfDot11APTrapDevDctTime
OBJECT-TYPE
Represents time at which the interference was detected.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.9DateAndTimeaccessible-for-notifycurrent
hpnicfDot11SaTrapChlNum
OBJECT-TYPE
Represents the radio channel where the air quality is monitored.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.10HpnicfDot11ChannelScopeTypeaccessible-for-notifycurrent
hpnicfDot11SaTrapChlQlt
OBJECT-TYPE
Represents the quality for this radio channel.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.11Integer32accessible-for-notifycurrent
hpnicfDot11SaTrapChlIntfNum
OBJECT-TYPE
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.12Integer32accessible-for-notifycurrent

Notifications

NameOIDStatus
hpnicfDot11SaIntfDevDetected
NOTIFICATION-TYPE
Interfering device is detected.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.1current
hpnicfDot11SaIntfDevDisappear
NOTIFICATION-TYPE
Interfering device disappeared.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.2current
hpnicfDot11SaChlQltLow
NOTIFICATION-TYPE
The quality of the channel is below the specified threshold.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.3current
hpnicfDot11SaChlQltRecover
NOTIFICATION-TYPE
The quality of the channel recovered from low status.
1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.4current