HPN-ICF-DOT11-APMT-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.75.2
- Last updated
- 2012-05-07 18:00
- Revisions
- 2012-05-07 18:00, 2010-10-11 18:00, 2010-09-15 12:00, 2009-08-07 18:00, 2009-07-29 18:00, 2009-05-07 20:00, 2008-11-07 10:00, 2008-07-09 18:00, 2008-02-25 18:00, 2007-12-21 18:00, 2007-06-19 18:00, 2007-04-27 20:00, 2007-02-01 20:00, 2006-05-10 19:00
- Namespace
- hp
- Source file
HPN-ICF-DOT11-APMT-MIB- Digest
sha256:35291b9a4cc97e7505dd1a21a8d1f22050b5de92ce6daa488d71fe7315ddbb82
Description
This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-DOT11-REF-MIB | HpnicfDot11ChannelScopeType, HpnicfDot11MACModeType, HpnicfDot11NotifyReasonType, HpnicfDot11ObjectIDType, HpnicfDot11RFModeType, HpnicfDot11RadioElementIndex, HpnicfDot11RadioScopeType, HpnicfDot11SSIDStringType, HpnicfDot11ServicePolicyIDType, HpnicfDot11TxPwrLevelScopeType, hpnicfDot11, hpnicfDot11APElementIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-DOT11-APMT-MIB HPN-ICF-DOT11-REF-MIB HPN-ICF-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfDot11APObjectGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1 | |||
| hpnicfDot11APObjectStatusTable OBJECT-TYPE The table will provide the general information about APs in different status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1 | not-accessible | current | |
| hpnicfDot11APObjectStatusEntry OBJECT-TYPE Each entry contains the general information of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1 | not-accessible | current | |
| hpnicfDot11APID OBJECT-TYPE To uniquely identify each AP, and relation-ship between hpnicfDot11APID and AP device will be static. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.1 | HpnicfDot11ObjectIDType | accessible-for-notify | current |
| hpnicfDot11APIPAddress OBJECT-TYPE Represents the IP address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.2 | IpAddress | read-only | current |
| hpnicfDot11APMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.3 | MacAddress | read-only | current |
| hpnicfDot11APOperationStatus OBJECT-TYPE Represents operational status of AP. The following values are supported: join - AP is joining to AC. joinConfirm - AC confirm whether permit AP to join. download - AP is downloading software from AC. config - AP and AC exchange configuration before AP - provide WLAN service. run - The WLAN service is ready. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.4 | INTEGER {join(1), joinConfirm(2), download(3), config(4), run(5)} | read-only | current |
| hpnicfDot11APTemplateNameOfAP OBJECT-TYPE Represents the name of current AP template configured for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.5 | OCTET STRING | read-only | current |
| hpnicfDot11APReset OBJECT-TYPE When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.6 | TruthValue | read-write | current |
| hpnicfDot11APCpuUsage OBJECT-TYPE Represents the current CPU usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.7 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APConnectionType OBJECT-TYPE Represents the current connection type. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.8 | INTEGER {master(1), slave(2), notAvailable(3)} | read-only | current |
| hpnicfDot11APLastImgDownloadTime OBJECT-TYPE Represents the time at which the device last downloaded image. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.9 | DateAndTime | read-only | current |
| hpnicfDot11APIPv6Address OBJECT-TYPE Represents the IPv6 address of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.10 | OCTET STRING | read-only | current |
| hpnicfDot11APLastRegisterTime OBJECT-TYPE Represents the time at which the device last registered with AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.11 | DateAndTime | read-only | current |
| hpnicfDot11APResetCM OBJECT-TYPE When reading the value from the node normal - Represents the AP cannot be reset. restart - Represents the AP can be reset. When writing the value to the node restart - Represents resetting the AP. Other values are not supported. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.12 | INTEGER {normal(0), restart(1)} | read-write | current |
| hpnicfDot11APObjectTable OBJECT-TYPE The table will provide information for APs in the running status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2 | not-accessible | current | |
| hpnicfDot11APObjectEntry OBJECT-TYPE Each entry contains information of an AP in run status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1 | not-accessible | current | |
| hpnicfDot11APObjID OBJECT-TYPE To uniquely identify each AP, and relation-ship between hpnicfDot11APObjID and AP device will be static. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.1 | HpnicfDot11ObjectIDType | not-accessible | current |
| hpnicfDot11CurrAPIPAddress OBJECT-TYPE Represents the IP address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.2 | IpAddress | read-only | current |
| hpnicfDot11CurrAPMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.3 | MacAddress | read-only | current |
| hpnicfDot11CurrACPortIndex OBJECT-TYPE Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.4 | Integer32 | read-only | current |
| hpnicfDot11CurrAPMACMode OBJECT-TYPE Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.5 | HpnicfDot11MACModeType | read-only | current |
| hpnicfDot11CurrAPTemplateName OBJECT-TYPE Represents the name of current AP template. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.6 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPStationAssocCount OBJECT-TYPE Represents the total number of stations which are associating to AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.7 | Integer32 | read-only | current |
| hpnicfDot11CurrAPName OBJECT-TYPE Represents the name of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.8 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPModelName OBJECT-TYPE Represents index of WTP model,with it to get AP model information. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.9 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPImageName OBJECT-TYPE Represents the image file name of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.10 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPSoftwareVersion OBJECT-TYPE Represents the software version of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.11 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPIPNetMask OBJECT-TYPE Represents the IP netmask of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.12 | IpAddress | read-only | current |
| hpnicfDot11CurrRadioModeSupport OBJECT-TYPE Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.13 | Integer32 | read-only | current |
| hpnicfDot11CurrIfNumber OBJECT-TYPE Represents number of interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.14 | Integer32 | read-only | current |
| hpnicfDot11CurrAPElementID OBJECT-TYPE Represents the AP element ID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.15 | Integer32 | read-only | current |
| hpnicfDot11CurrAPMode OBJECT-TYPE Represents the forward mode of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.16 | INTEGER {bridge(1), route(2)} | read-only | current |
| hpnicfDot11CurrAPIPv6Address OBJECT-TYPE Represents the IPv6 address of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.17 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPSSIDNumber OBJECT-TYPE Represents the number of SSID configured on AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.18 | Integer32 | read-only | current |
| hpnicfDot11CurrAPManufacturer OBJECT-TYPE By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.19 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPMemorySize OBJECT-TYPE Represents the size of AP memory. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.20 | Integer32 | read-only | current |
| hpnicfDot11CurrAPMemSizeInBytes OBJECT-TYPE Represents the size of AP memory. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.21 | Integer32 | read-only | current |
| hpnicfDot11CurrAPFlashSize OBJECT-TYPE Represents the size of AP flash. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.22 | Integer32 | read-only | current |
| hpnicfDot11CurrAPFlashSizeInBytes OBJECT-TYPE This object represents the size of AP flash. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.23 | Integer32 | read-only | current |
| hpnicfDot11CurrAPReleasedVersion OBJECT-TYPE Represents the released version of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.24 | OCTET STRING | read-only | current |
| hpnicfDot11CurrRadioModeSupport2 OBJECT-TYPE Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.25 | Integer32 | read-only | current |
| hpnicfDot11CurrAPCPUTypeCM OBJECT-TYPE Represents the CPU type of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.26 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPMemoryTypeCM OBJECT-TYPE Represents the memory card type of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.27 | OCTET STRING | read-only | current |
| hpnicfDot11CurrAPBSSIDNumberCM OBJECT-TYPE Represents the number of BSSID configured on AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.28 | Integer32 | read-only | current |
| hpnicfDot11APRadioTable OBJECT-TYPE The table will describe the radio information of AP. The AP here will be in running status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3 | not-accessible | current | |
| hpnicfDot11APRadioEntry OBJECT-TYPE Each entry contains the information of each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1 | not-accessible | current | |
| hpnicfDot11CurAPID OBJECT-TYPE To uniquely identify a AP in running status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.1 | OCTET STRING (SIZE(0..64)) | not-accessible | current |
| hpnicfDot11RadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.2 | Integer32 (0..2147483647) | accessible-for-notify | current |
| hpnicfDot11AdminStatus OBJECT-TYPE Represents the administrator status of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.3 | TruthValue | read-only | current |
| hpnicfDot11OperStatus OBJECT-TYPE Represents the operational status of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.4 | TruthValue | read-only | current |
| hpnicfDot11Channel OBJECT-TYPE Represents the current channel allocation for radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.5 | HpnicfDot11ChannelScopeType | read-only | current |
| hpnicfDot11TxPowerLevel OBJECT-TYPE Represents the current transmit power level for radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.6 | HpnicfDot11TxPwrLevelScopeType | read-only | current |
| hpnicfDot11APRadioIfIndex OBJECT-TYPE Represents the interface index for the radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.7 | Integer32 | read-only | current |
| hpnicfDot11AntennaGain OBJECT-TYPE Represents the current gain for antenna. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.8 | Integer32 | read-only | current |
| hpnicfDot11MaxBandwidth OBJECT-TYPE Represents the maximum bandwidth for the radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.9 | Integer32 | read-only | current |
| hpnicfDot11ResourceUseRatio OBJECT-TYPE Represents the ratio of radio resource usage. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.10 | Integer32 | read-only | current |
| hpnicfDot11RadioModeSupport OBJECT-TYPE Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.11 | Unsigned32 | read-only | current |
| hpnicfDot11TxPowerLevel2 OBJECT-TYPE The TxPowerLevel N currently being used to transmit data. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.12 | Integer32 (1..8) | read-only | current |
| hpnicfDot11PowerMgmtStatus OBJECT-TYPE Represents status of power management of the radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.13 | TruthValue | read-only | current |
| hpnicfDot11ChannelSwitchTimes OBJECT-TYPE Represents the channel switch times. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.14 | Counter32 | read-only | current |
| hpnicfDot11AntennaType OBJECT-TYPE Represents type of the antenna which radio used. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.15 | OCTET STRING | read-only | current |
| hpnicfDot11DiversitySelectionRx OBJECT-TYPE Represents the diversity selection received. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.16 | TruthValue | read-only | current |
| hpnicfDot11MaxTxPwrLvl OBJECT-TYPE Represents the maximum transmit power. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.17 | OCTET STRING | read-only | current |
| hpnicfDot11PwrAttRange OBJECT-TYPE Represents the range of power attenuation. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.18 | Integer32 | read-only | current |
| hpnicfDot11AvgRxSignalStrength OBJECT-TYPE Represents the average received signal strength. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.19 | Integer32 | read-only | current |
| hpnicfDot11HighestRxSignalStrength OBJECT-TYPE Represents the highest received signal strength. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.20 | Integer32 | read-only | current |
| hpnicfDot11LowestRxSignalStrength OBJECT-TYPE Represents the lowest received signal strength. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.21 | Integer32 | read-only | current |
| hpnicfDot11RadioIfUpdownTimes OBJECT-TYPE Represents the up/down times on radio interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.22 | Counter32 | read-only | current |
| hpnicfDot11RadioIfLastChange OBJECT-TYPE Represents time at last change that occurred on radio interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.23 | TimeTicks | read-only | current |
| hpnicfDot11RadioModeSupport2 OBJECT-TYPE Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.24 | Unsigned32 | read-only | current |
| hpnicfDot11OperStatusCM OBJECT-TYPE Represents the operational status of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.25 | INTEGER {up(1), down(2), testing(3), admindown(4)} | read-only | current |
| hpnicfDot11APBSSTable OBJECT-TYPE After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4 | not-accessible | current | |
| hpnicfDot11APBSSEntry OBJECT-TYPE Each entry contains information of each BSS for specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1 | not-accessible | current | |
| hpnicfDot11WlanID OBJECT-TYPE Represents ID of a specific ESS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| hpnicfDot11BSSID OBJECT-TYPE As MAC Address format, it is to identify BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.2 | MacAddress | read-only | current |
| hpnicfDot11CurrSvcPolicyID OBJECT-TYPE Represents the ID of each service policy used by the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.3 | HpnicfDot11ServicePolicyIDType | read-only | current |
| hpnicfDot11SSID OBJECT-TYPE This object represents the SSID corresponding to this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.4 | OCTET STRING | read-only | current |
| hpnicfDot11CurrSSIDResourceUseRatio OBJECT-TYPE Represents the ratio of resource usage of curr SSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.5 | Integer32 | read-only | current |
| hpnicfDot11APEssVlanId OBJECT-TYPE This object represents the VlanID of the interface ESS corresponding to this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.6 | Integer32 | read-only | current |
| hpnicfDot11APModelTable OBJECT-TYPE The table defines the capability information for a specific kind of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5 | not-accessible | current | |
| hpnicfDot11APModelEntry OBJECT-TYPE Each entry contains capability information for a specific kind of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1 | not-accessible | current | |
| hpnicfDot11APModelAlias OBJECT-TYPE Represents alias of AP model name. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.1 | OCTET STRING (SIZE(0..127)) | not-accessible | current |
| hpnicfDot11APModelName OBJECT-TYPE Represents AP model name(like WA2100). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.2 | OCTET STRING | read-only | current |
| hpnicfDot11RadioNumSupport OBJECT-TYPE Represents how many radios the specific AP model could support. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.3 | HpnicfDot11RadioScopeType | read-only | current |
| hpnicfDot11StationNumSupport OBJECT-TYPE Represents how many station could be supported by a specific AP model. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.4 | Integer32 | read-only | current |
| hpnicfDot11MACModeSupport OBJECT-TYPE Represents the MAC mode type could be supported by a specific AP model. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.5 | HpnicfDot11MACModeType | read-only | current |
| hpnicfDot11APManufacturer OBJECT-TYPE By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.6 | OCTET STRING | read-only | current |
| hpnicfDot11APCPUType OBJECT-TYPE Represents the CPU type of AP | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.7 | OCTET STRING | read-only | current |
| hpnicfDot11APCPUClockSpeed OBJECT-TYPE Represents the clock speed of CPU. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.8 | Unsigned32 | read-only | current |
| hpnicfDot11APMemoryType OBJECT-TYPE Represents the memory card type of AP | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.9 | OCTET STRING | read-only | current |
| hpnicfDot11APFlashType OBJECT-TYPE Represents the flash card type of AP | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.11 | OCTET STRING | read-only | current |
| hpnicfDot11APFlashSize OBJECT-TYPE Represents the size of AP flash card. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.12 | Unsigned32 | read-only | current |
| hpnicfDot11APMemSize OBJECT-TYPE Represents the size of AP memory card. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.13 | Gauge32 | read-only | current |
| hpnicfDot11APFlashSizeInBytes OBJECT-TYPE This object represents the size of AP flash card in bytes. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.14 | Unsigned32 | read-only | current |
| hpnicfDot11APMemorySize OBJECT-TYPE Represents the size of AP memory card. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.20 | Unsigned32 | read-only | current |
| hpnicfDot11APIfTable OBJECT-TYPE This table represents the AP interface informations. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6 | not-accessible | current | |
| hpnicfDot11APIfEntry OBJECT-TYPE Each entry of the table will provide data for the interface of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1 | not-accessible | current | |
| hpnicfDot11APIfIndex OBJECT-TYPE Represents the index for a interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.1 | Integer32 | not-accessible | current |
| hpnicfDot11APIfDescr OBJECT-TYPE Represents the interface description for a interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.2 | OCTET STRING | read-only | current |
| hpnicfDot11APIfType OBJECT-TYPE Represents the interface type for a interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.3 | Integer32 | read-only | current |
| hpnicfDot11APIfMtu OBJECT-TYPE Represents size of the largest datagram which can be sent/received on the interface, specified in octets. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.4 | Integer32 | read-write | current |
| hpnicfDot11APIfPHYAddress OBJECT-TYPE Represents the PHY address of interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.5 | OCTET STRING | read-only | current |
| hpnicfDot11APIfSpeed OBJECT-TYPE Represents maximum bandwidth of this interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.6 | Integer32 | read-only | current |
| hpnicfDot11APIfInDataRate OBJECT-TYPE Represents the average input data rate of this interface in latest 300 seconds. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.7 | Integer32 | read-only | current |
| hpnicfDot11APIfOutDataRate OBJECT-TYPE Represents the average output data rate of this interface in latest 300 seconds. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.8 | Integer32 | read-only | current |
| hpnicfDot11APIfSpeedKbps OBJECT-TYPE Represents maximum bandwidth of this interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.9 | Gauge32 | read-only | current |
| hpnicfDot11APIfTypeCM OBJECT-TYPE Represents the interface type. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.10 | Integer32 | read-only | current |
| hpnicfDot11APSSIDObjectTable OBJECT-TYPE This table provides BSSID number configuration information based on SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7 | not-accessible | current | |
| hpnicfDot11APSSIDObjectEntry OBJECT-TYPE Each entry provides BSSID number configuration information of a SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1 | not-accessible | current | |
| hpnicfDot11APConfigSPID OBJECT-TYPE Represents the service policy ID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.1 | HpnicfDot11ServicePolicyIDType | not-accessible | current |
| hpnicfDot11APConfigSSIDName OBJECT-TYPE Represents the SSID name of this service policy. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.2 | HpnicfDot11SSIDStringType | read-only | current |
| hpnicfDot11APConfigBSSIDNum OBJECT-TYPE Represents the number of BSSID that be configured with current SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.3 | Integer32 | read-only | current |
| hpnicfDot11APConfigPortalStaNum OBJECT-TYPE Represents the total number of associated protal stations with current SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.4 | Integer32 | read-only | current |
| hpnicfDot11APSysInfoTable OBJECT-TYPE The table provides the system information of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8 | not-accessible | current | |
| hpnicfDot11APSysInfoEntry OBJECT-TYPE Each entry provides system information of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1 | not-accessible | current | |
| hpnicfDot11APSysUpTime OBJECT-TYPE Represents how long AP has been powered on. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.1 | TimeTicks | read-only | current |
| hpnicfDot11APCPURTUsage OBJECT-TYPE Represents the CPU real time usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.2 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APCPUAvgUsage OBJECT-TYPE Represents the CPU average usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.3 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APMemRTUsage OBJECT-TYPE Represents the memory real time usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.4 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APMemAvgUsage OBJECT-TYPE Represents the average memory usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.5 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APIPAddressGateway OBJECT-TYPE Represents the IP address gateway for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.6 | IpAddress | read-only | current |
| hpnicfDot11APACAssociateStatus OBJECT-TYPE Represents associate status of AP and AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.7 | INTEGER {associated(1), deassociated(2), downloadingImage(3)} | read-only | current |
| hpnicfDot11APManuBuildInfo OBJECT-TYPE Represents the device version information for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.8 | OCTET STRING (SIZE(0..255)) | read-only | current |
| hpnicfDot11APFlashFreeSize OBJECT-TYPE Represents the free size of AP flash card. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.9 | Unsigned32 | read-only | current |
| hpnicfDot11APTemperature OBJECT-TYPE Represents the device temperature information for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.10 | Integer32 | read-only | current |
| hpnicfDot11APIdleListTable OBJECT-TYPE This table provides the list of idle AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9 | not-accessible | current | |
| hpnicfDot11APIdleListEntry OBJECT-TYPE Each entry provides information of a idle AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1 | not-accessible | current | |
| hpnicfDot11APIdleTemplateName OBJECT-TYPE Represents the name of idle AP template. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1.1 | OCTET STRING (SIZE(0..127)) | not-accessible | current |
| hpnicfDot11APIdleSerialID OBJECT-TYPE Represents AP serial ID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1.2 | OCTET STRING | read-only | current |
| hpnicfDot11APSysInfoByAPIDTable OBJECT-TYPE The table provides the system information of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10 | not-accessible | current | |
| hpnicfDot11APSysInfoByAPIDEntry OBJECT-TYPE Each entry provides system information of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1 | not-accessible | current | |
| hpnicfDot11APSysUpTime2 OBJECT-TYPE Represents how long AP has been powered on. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.1 | TimeTicks | read-only | current |
| hpnicfDot11APCPURTUsage2 OBJECT-TYPE Represents the CPU real time usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.2 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APCPUAvgUsage2 OBJECT-TYPE Represents the CPU average usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.3 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APMemRTUsage2 OBJECT-TYPE Represents the memory real time usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.4 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APMemAvgUsage2 OBJECT-TYPE Represents the average memory usage for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.5 | Integer32 (0..100) | read-only | current |
| hpnicfDot11APIPAddressGateway2 OBJECT-TYPE Represents the IP address gateway for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.6 | IpAddress | read-only | current |
| hpnicfDot11APACAssociateStatus2 OBJECT-TYPE Represents associate status of AP and AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.7 | INTEGER {associated(1), deassociated(2), downloadingImage(3)} | read-only | current |
| hpnicfDot11APManuBuildInfo2 OBJECT-TYPE Represents the device version information for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.8 | OCTET STRING (SIZE(0..255)) | read-only | current |
| hpnicfDot11APFlashFreeSize2 OBJECT-TYPE Represents the free size of AP flash card. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.9 | Unsigned32 | read-only | current |
| hpnicfDot11APTemperature2 OBJECT-TYPE Represents the device temperature information for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.10 | Integer32 | read-only | current |
| hpnicfDot11APMacAddress2 OBJECT-TYPE Represents the MAC address of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.11 | MacAddress | read-only | current |
| hpnicfDot11APACAssociateStatusCM OBJECT-TYPE Represents associate status of AP and AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.12 | INTEGER {deassociated(0), associated(1)} | read-only | current |
| hpnicfDot11APStatisGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2 | |||
| hpnicfDot11APRxStatisTable OBJECT-TYPE The table will provide the receiving statistic for a specific radio of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1 | not-accessible | current | |
| hpnicfDot11APRxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1 | not-accessible | current | |
| hpnicfDot11RxFrameDupCnt OBJECT-TYPE Represents the number of duplicate frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.1 | Counter32 | read-only | current |
| hpnicfDot11RxFrameCnt OBJECT-TYPE Represents the number of frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.2 | Counter32 | read-only | current |
| hpnicfDot11RxUcastFrameCnt OBJECT-TYPE Represents the number of unicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.3 | Counter32 | read-only | current |
| hpnicfDot11RxBcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.4 | Counter32 | read-only | current |
| hpnicfDot11RxMcastFrameCnt OBJECT-TYPE Represents the number of multicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.5 | Counter32 | read-only | current |
| hpnicfDot11RxDiscardFrameCnt OBJECT-TYPE Represents the number of frames discarded by AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.6 | Counter32 | read-only | current |
| hpnicfDot11RxFragCnt OBJECT-TYPE Represents the number of frame fragments reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.7 | Counter32 | read-only | current |
| hpnicfDot11RxFcsErrCnt OBJECT-TYPE Represents the number of FCS error frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.8 | Counter32 | read-only | current |
| hpnicfDot11RxFrameBytes OBJECT-TYPE Represents the bytes of frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.9 | Counter32 | read-only | current |
| hpnicfDot11RxUcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.10 | Counter32 | read-only | current |
| hpnicfDot11RxBcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.11 | Counter32 | read-only | current |
| hpnicfDot11RxMcastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.12 | Counter32 | read-only | current |
| hpnicfDot11RxDiscardFrameBytes OBJECT-TYPE Represents the bytes of frames discarded by AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.13 | Counter32 | read-only | current |
| hpnicfDot11RxMgmtFrameCnt OBJECT-TYPE Represents the number of management frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.14 | Counter32 | read-only | current |
| hpnicfDot11RxCtrlFrameCnt OBJECT-TYPE Represents the number of control frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.15 | Counter32 | read-only | current |
| hpnicfDot11RxDataFrameCnt OBJECT-TYPE Represents the number of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.16 | Counter32 | read-only | current |
| hpnicfDot11RxDecryptErrorCnt OBJECT-TYPE Represents the number of decryption error. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.17 | Counter32 | read-only | current |
| hpnicfDot11RxAuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.18 | Counter32 | read-only | current |
| hpnicfDot11RxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.19 | Counter32 | read-only | current |
| hpnicfDot11RxFrameErrorRatio OBJECT-TYPE Represents the ratio of error frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.20 | Integer32 | read-only | current |
| hpnicfDot11RxPhyErrorCnt OBJECT-TYPE Represents the number of physical reception error. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.21 | Counter32 | read-only | current |
| hpnicfDot11RxMICErrorCnt OBJECT-TYPE Represents the number of MIC verification error. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.22 | Counter32 | read-only | current |
| hpnicfDot11RxDataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.23 | Counter32 | read-only | current |
| hpnicfDot11RadioRxAverSnr OBJECT-TYPE Represents the average signal noise rate of this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.24 | Integer32 | read-only | current |
| hpnicfDot11RxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.25 | Counter32 | read-only | current |
| hpnicfDot11RxTrafficSpeed OBJECT-TYPE Represents the bytes of frames reception per second. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.26 | Integer32 | read-only | current |
| hpnicfDot11RxUcastDataFrameCnt OBJECT-TYPE Represents the number of unicast data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.27 | Counter64 | read-only | current |
| hpnicfDot11RxNUcastDataFrameCnt OBJECT-TYPE Represents the number of non-unicast data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.28 | Counter64 | read-only | current |
| hpnicfDot11RxTotalDiscardFrameCnt OBJECT-TYPE Represents the number of total frames discarded by radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.29 | Counter64 | read-only | current |
| hpnicfDot11RxTotalIPCheckErrPacketCnt OBJECT-TYPE Represents the total number of IP checksum error packets received through the current radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.30 | Counter64 | read-only | current |
| hpnicfDot11RxSignalStrengthPacketCntCM OBJECT-TYPE Represents the count of received packets according to signal strength. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.31 | OCTET STRING | read-only | current |
| hpnicfDot11RxDataFrameCntCM OBJECT-TYPE Represents the number of received data frames, excluding retransmitted frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.32 | Counter32 | read-only | current |
| hpnicfDot11APTxStatisTable OBJECT-TYPE The table will provide the transmission statistic for a specific radio of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2 | not-accessible | current | |
| hpnicfDot11APTxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1 | not-accessible | current | |
| hpnicfDot11TxFragCnt OBJECT-TYPE Represents the number of fragmented frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.1 | Counter32 | read-only | current |
| hpnicfDot11FailedCnt OBJECT-TYPE Represents the number of transmission failures. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.2 | Counter32 | read-only | current |
| hpnicfDot11RetryCnt OBJECT-TYPE Represents the number of transmit retries. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.3 | Counter32 | read-only | current |
| hpnicfDot11MultiRetryCnt OBJECT-TYPE Represents the number of transmits that required more than one retry. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.4 | Counter32 | read-only | current |
| hpnicfDot11RtsSuccessCnt OBJECT-TYPE Represents the number of successful RTS (Request to send) transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.5 | Counter32 | read-only | current |
| hpnicfDot11RtsFailCnt OBJECT-TYPE Represents the number of RTS transmission failures. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.6 | Counter32 | read-only | current |
| hpnicfDot11AckFailCnt OBJECT-TYPE Represents the number of acknowledgement failures. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.7 | Counter32 | read-only | current |
| hpnicfDot11TxFrameCnt OBJECT-TYPE Represents the total number of frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.8 | Counter32 | read-only | current |
| hpnicfDot11TxUcastFrameCnt OBJECT-TYPE Represents the number of unicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.9 | Counter32 | read-only | current |
| hpnicfDot11TxBcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.10 | Counter32 | read-only | current |
| hpnicfDot11TxMcastFrameCnt OBJECT-TYPE Represents the number of multicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.11 | Counter32 | read-only | current |
| hpnicfDot11TxDiscardFrameCnt OBJECT-TYPE Represents the number of frames discarded by AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.12 | Counter32 | read-only | current |
| hpnicfDot11TxFrameBytes OBJECT-TYPE Represents the total bytes of frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.13 | Counter32 | read-only | current |
| hpnicfDot11TxUcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.14 | Counter32 | read-only | current |
| hpnicfDot11TxBcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.15 | Counter32 | read-only | current |
| hpnicfDot11TxMcastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.16 | Counter32 | read-only | current |
| hpnicfDot11TxDiscardFrameBytes OBJECT-TYPE Represents the bytes of multicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.17 | Counter32 | read-only | current |
| hpnicfDot11TxAuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.18 | Counter32 | read-only | current |
| hpnicfDot11TxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.19 | Counter32 | read-only | current |
| hpnicfDot11TxFrameRetryRatio OBJECT-TYPE Represents the ratio of retry frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.20 | Integer32 | read-only | current |
| hpnicfDot11TxDataFrameCnt OBJECT-TYPE Represents the number of data frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.21 | Counter32 | read-only | current |
| hpnicfDot11TxDataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.22 | Counter32 | read-only | current |
| hpnicfDot11TxMSDUCnt OBJECT-TYPE Represents the total number of MSDU transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.23 | Counter32 | read-only | current |
| hpnicfDot11TxDiscardMSDUCnt OBJECT-TYPE Represents the number of discarded MSDU transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.24 | Counter32 | read-only | current |
| hpnicfDot11RetryMSDUCnt OBJECT-TYPE Represents the number of retransfer MSDU. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.25 | Counter32 | read-only | current |
| hpnicfDot11TxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.26 | Counter32 | read-only | current |
| hpnicfDot11TxTrafficSpeed OBJECT-TYPE Represents the bytes of frames transmission per second. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.27 | Integer32 | read-only | current |
| hpnicfDot11TxErrFrameRatio OBJECT-TYPE Represents the ratio of error frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.28 | Integer32 | read-only | current |
| hpnicfDot11TxFrameRate OBJECT-TYPE Represents the count of frames transmission per second. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.29 | Integer32 | read-only | current |
| hpnicfDot11TxMgtFrameCnt OBJECT-TYPE Represents the number of transmitted management frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.30 | Counter32 | read-only | current |
| hpnicfDot11TxCtrlFrameCnt OBJECT-TYPE Represents the number of transmission control frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.31 | Counter32 | read-only | current |
| hpnicfDot11TxMACErrCnt OBJECT-TYPE Represents the count of MAC error frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.32 | Counter32 | read-only | current |
| hpnicfDot11TxErrFrameCnt OBJECT-TYPE Represents the count of error frame. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.33 | Counter32 | read-only | current |
| hpnicfDot11TxUcastDataFrameCnt OBJECT-TYPE Represents the number of unicast data frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.34 | Counter64 | read-only | current |
| hpnicfDot11TxNUcastDataFrameCnt OBJECT-TYPE Represents the number of non-unicast data frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.35 | Counter64 | read-only | current |
| hpnicfDot11APAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3 | not-accessible | current | |
| hpnicfDot11APAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1 | not-accessible | current | |
| hpnicfDot11ApStationAssocSum OBJECT-TYPE Represents the total number of station association with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.1 | Counter32 | read-only | current |
| hpnicfDot11ApStationAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.2 | Counter32 | read-only | current |
| hpnicfDot11ApStationReassocSum OBJECT-TYPE Represents the total number of station reassociation with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.3 | Counter32 | read-only | current |
| hpnicfDot11ApStationAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.4 | Counter32 | read-only | current |
| hpnicfDot11ApStationExDeAuthenSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.5 | Counter32 | read-only | current |
| hpnicfDot11ApStationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.6 | Integer32 | read-only | current |
| hpnicfDot11ApStaCurAuthSuccSum OBJECT-TYPE Represents the successful number of station authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.7 | Integer32 | read-only | current |
| hpnicfDot11AllStationUpSumTime OBJECT-TYPE Represents the sum of duration of all stations which associate with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.8 | Counter32 | read-only | current |
| hpnicfDot11ApStationAssocReqSum OBJECT-TYPE Represents the number of station association request with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.9 | Counter32 | read-only | current |
| hpnicfDot11AllStationUpSumTimeTicks OBJECT-TYPE Represents the sum of duration of all stations which associate with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.10 | TimeTicks | read-only | current |
| hpnicfDot11ApStationReassocReqSum OBJECT-TYPE Represents the total number of station reassociation request with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.11 | Counter32 | read-only | current |
| hpnicfDot11ApStationReassocFailSum OBJECT-TYPE Represents the total number of station reassociation failure with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.12 | Counter32 | read-only | current |
| hpnicfDot11BSSRxStatisTable OBJECT-TYPE The table will provide the reception statistic for a specific BSS on a radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4 | not-accessible | current | |
| hpnicfDot11BSSRxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1 | not-accessible | current | |
| hpnicfDot11BSSRxFrameCnt OBJECT-TYPE Represents the number of frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.1 | Counter32 | read-only | current |
| hpnicfDot11BSSRxFrameBytes OBJECT-TYPE Represents the bytes of frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.2 | Counter32 | read-only | current |
| hpnicfDot11BSSRxDataFrameCnt OBJECT-TYPE Represents the number of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.3 | Counter32 | read-only | current |
| hpnicfDot11BSSRxDataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.4 | Counter32 | read-only | current |
| hpnicfDot11BSSRxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.5 | Counter32 | read-only | current |
| hpnicfDot11BSSRxFrameErrorRatio OBJECT-TYPE Represents the ratio of error frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.6 | Integer32 | read-only | current |
| hpnicfDot11BSSRxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.7 | Counter32 | read-only | current |
| hpnicfDot11BSSRxUniFrameCnt OBJECT-TYPE Represents the count of unicast frames received. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.8 | Counter32 | read-only | current |
| hpnicfDot11BSSRxNonUniFrameCnt OBJECT-TYPE Represents the count of non-unicast frames received. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.9 | Integer32 | read-only | current |
| hpnicfDot11BSSRxAuthenFrameCnt OBJECT-TYPE Represents the count of authentication frames received. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.10 | Counter32 | read-only | current |
| hpnicfDot11BSSTxStatisTable OBJECT-TYPE The table will provide the transmission statistic for a specific BSS on a radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5 | not-accessible | current | |
| hpnicfDot11BSSTxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1 | not-accessible | current | |
| hpnicfDot11BSSTxFrameCnt OBJECT-TYPE Represents the total number of frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.1 | Counter32 | read-only | current |
| hpnicfDot11BSSTxFrameBytes OBJECT-TYPE Represents the total number of bytes transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.2 | Counter32 | read-only | current |
| hpnicfDot11BSSTxDataFrameCnt OBJECT-TYPE Represents the number of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.3 | Counter32 | read-only | current |
| hpnicfDot11BSSTxDataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.4 | Counter32 | read-only | current |
| hpnicfDot11BSSTxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.5 | Counter32 | read-only | current |
| hpnicfDot11BSSTxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.6 | Counter32 | read-only | current |
| hpnicfDot11BSSTxRetryCnt OBJECT-TYPE Represents the count of bytes retransmitted with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.7 | Counter32 | read-only | current |
| hpnicfDot11BSSTxUniFrameCnt OBJECT-TYPE Represents the count of unicast frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.8 | Counter32 | read-only | current |
| hpnicfDot11BSSTxNonUniFrameCnt OBJECT-TYPE Represents the number of non-unicast frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.9 | Integer32 | read-only | current |
| hpnicfDot11BSSTxAuthenFrameCnt OBJECT-TYPE Represents the count of authentication frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.10 | Counter32 | read-only | current |
| hpnicfDot11BSSAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6 | not-accessible | current | |
| hpnicfDot11BSSAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1 | not-accessible | current | |
| hpnicfDot11BSSStationAssocSum OBJECT-TYPE Represents the total number of station association with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.1 | Counter32 | read-only | current |
| hpnicfDot11BSSStationAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.2 | Counter32 | read-only | current |
| hpnicfDot11BSSStationReassocSum OBJECT-TYPE Represents the total number of station reassociation with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.3 | Counter32 | read-only | current |
| hpnicfDot11BSSStationAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.4 | Counter32 | read-only | current |
| hpnicfDot11BSSStationExDeAssocSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.5 | Counter32 | read-only | current |
| hpnicfDot11BSSStationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.6 | Integer32 | read-only | current |
| hpnicfDot11BSSStationAssocReqSum OBJECT-TYPE Represents the total number of station association request with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.7 | Counter32 | read-only | current |
| hpnicfDot11BSSStationCurAuthSum OBJECT-TYPE Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.8 | Integer32 | read-only | current |
| hpnicfDot11APLinkStatisTable OBJECT-TYPE The table will provide the link statistic for AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7 | not-accessible | current | |
| hpnicfDot11APLinkStatisEntry OBJECT-TYPE Each entry provides the link statistic of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1 | not-accessible | current | |
| hpnicfDot11UpLinkUpDownTimes OBJECT-TYPE Represents up/down times of uplink interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1.1 | Counter32 | read-only | current |
| hpnicfDot11DownLinkUpDownTimes OBJECT-TYPE Represents up/down times of downlink interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1.2 | Counter32 | read-only | current |
| hpnicfDot11RadioAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8 | not-accessible | current | |
| hpnicfDot11RadioAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1 | not-accessible | current | |
| hpnicfDot11RadioStaAssocSum OBJECT-TYPE Represents the total number of station association with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.1 | Counter32 | read-only | current |
| hpnicfDot11RadioStaAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.2 | Counter32 | read-only | current |
| hpnicfDot11RadioStaReassocSum OBJECT-TYPE Represents the total number of station re-association with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.3 | Counter32 | read-only | current |
| hpnicfDot11RadioStaAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.4 | Counter32 | read-only | current |
| hpnicfDot11RadioStaExDeAssocSum OBJECT-TYPE Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.5 | Counter32 | read-only | current |
| hpnicfDot11RadioStaCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.6 | Integer32 | read-only | current |
| hpnicfDot11RadioMngFrameStatisTable OBJECT-TYPE The table will provide the management frame statistic for this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9 | not-accessible | current | |
| hpnicfDot11RadioMngFrameStatisEntry OBJECT-TYPE Each entry of the table will provide the management frame statistic for this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1 | not-accessible | current | |
| hpnicfDot11RadioStatisIndex OBJECT-TYPE Represents index of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.1 | HpnicfDot11RadioElementIndex | not-accessible | current |
| hpnicfDot11MngFrameType OBJECT-TYPE Represents the type of the management frame on this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.2 | INTEGER {assocReq(1), assocResp(2), reassocReq(3), reassocResp(4), probeReq(5), probeResp(6), beacon(7), atim(8), disassociation(9), authentication(10), deauthentication(11), action(12)} | not-accessible | current |
| hpnicfDot11MngFrameCnt OBJECT-TYPE Represents the total number of each type for management frame on this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.3 | Counter32 | read-only | current |
| hpnicfDot11APAuthFailStatisTable OBJECT-TYPE The table will provide the authentication failure statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10 | not-accessible | current | |
| hpnicfDot11APAuthFailStatisEntry OBJECT-TYPE Each entry of the table will provide the authentication failure statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1 | not-accessible | current | |
| hpnicfDot11APAuthFailStatisType OBJECT-TYPE Represents the type of authentication failure with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1.1 | INTEGER {invalidation(1), overtime(2), rejected(3), other(4)} | not-accessible | current |
| hpnicfDot11APAuthFailStatisCnt OBJECT-TYPE Represents the total number of each type for authentication failure on this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1.2 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatisTable OBJECT-TYPE The table will provide the association failure statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11 | not-accessible | current | |
| hpnicfDot11APAssocFailStatisEntry OBJECT-TYPE Each entry of the table will provide the association failure statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1 | not-accessible | current | |
| hpnicfDot11APAssocFailStatisType OBJECT-TYPE Represents the type of association failure with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1.1 | INTEGER {invalidation(1), overtime(2), rejected(3), other(4)} | not-accessible | current |
| hpnicfDot11APAssocFailStatisCnt OBJECT-TYPE Represents the total number of each type for association failure on this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1.2 | Counter32 | read-only | current |
| hpnicfDot11APReassocStatisTable OBJECT-TYPE The table will provide the re-association statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12 | not-accessible | current | |
| hpnicfDot11APReassocStatisEntry OBJECT-TYPE Each entry of the table will provide the re-association statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1 | not-accessible | current | |
| hpnicfDot11APReassocStatisType OBJECT-TYPE Represents the type of re-association with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1.1 | INTEGER {total(1), success(2), invalidation(3), overtime(4), rejected(5), other(6)} | not-accessible | current |
| hpnicfDot11APReassocStatisCnt OBJECT-TYPE Represents the total number of each type for re-association with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1.2 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthStatisTable OBJECT-TYPE The table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13 | not-accessible | current | |
| hpnicfDot11APUserAuthStatisEntry OBJECT-TYPE Each entry of the table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1 | not-accessible | current | |
| hpnicfDot11UserAuthStatisType OBJECT-TYPE Represents the type of user authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1.1 | INTEGER {total(1), success(2), keyError(3), invalidation(4), overtime(5), rejected(6), other(7)} | not-accessible | current |
| hpnicfDot11UserAuthStatisCnt OBJECT-TYPE Represents the total number of each type for user authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1.2 | Counter32 | read-only | current |
| hpnicfDot11APDeauthStatisTable OBJECT-TYPE The table will provide the de-authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14 | not-accessible | current | |
| hpnicfDot11APDeauthStatisEntry OBJECT-TYPE Each entry of the table will provide the de-authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1 | not-accessible | current | |
| hpnicfDot11APDeauthStatisType OBJECT-TYPE Represents the type of de-authentication for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1.1 | INTEGER {total(1), stationLeaving(2), shortResource(3), exception(4), other(5)} | not-accessible | current |
| hpnicfDot11APDeauthStatisCnt OBJECT-TYPE Represents the total number of each type for de-authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1.2 | Counter32 | read-only | current |
| hpnicfDot11APDeassocStatisTable OBJECT-TYPE The table will provide the de-association statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15 | not-accessible | current | |
| hpnicfDot11APDeassocStatisEntry OBJECT-TYPE Each entry of the table will provide the de-association statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1 | not-accessible | current | |
| hpnicfDot11APDeassocStatisType OBJECT-TYPE Represents the type of de-association with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1.1 | INTEGER {total(1), stationLeaving(2), shortResource(3), exception(4), other(5)} | not-accessible | current |
| hpnicfDot11APDeassocStatisCnt OBJECT-TYPE Represents the total number of each type for de-association with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1.2 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatis2Table OBJECT-TYPE This table will provide statistic of association fails for each ap. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16 | not-accessible | current | |
| hpnicfDot11APAssocFailStatis2Entry OBJECT-TYPE Each entry will provide statistic of association fails for this ap. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1 | not-accessible | current | |
| hpnicfDot11APAssocFailStatis2Type OBJECT-TYPE Represents the type of association fails for this AP | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1.1 | INTEGER {shortResource(1), notSupportRateSet(2), unknownReasonCode(3), other(4)} | not-accessible | current |
| hpnicfDot11APAssocFailStatis2Cnt OBJECT-TYPE Represents the total count of association fails for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1.2 | Counter32 | read-only | current |
| hpnicfDot11APIfStatisTable OBJECT-TYPE The table will provide the statistics on the interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17 | not-accessible | current | |
| hpnicfDot11APIfStatisEntry OBJECT-TYPE Each entry of the table will provide statistics on the interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1 | not-accessible | current | |
| hpnicfDot11APIfInPkts OBJECT-TYPE Represents the total number of packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.1 | Counter32 | read-only | current |
| hpnicfDot11APIfInNormalPkts OBJECT-TYPE Represents the total number of correct packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.2 | Counter32 | read-only | current |
| hpnicfDot11APIfInErrorPkts OBJECT-TYPE Represents the total number of error packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.3 | Counter32 | read-only | current |
| hpnicfDot11APIfOutPkts OBJECT-TYPE Represents the total number of packets sent from the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.4 | Counter32 | read-only | current |
| hpnicfDot11APIfInOctets OBJECT-TYPE Represents the total number of octets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.5 | Counter32 | read-only | current |
| hpnicfDot11APIfOutOctets OBJECT-TYPE Represents the total number of octets sent from the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.6 | Counter32 | read-only | current |
| hpnicfDot11APIfFlowOut OBJECT-TYPE Represents the traffic rate (byte/s) on the uplink interface during a sampling period. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.7 | Unsigned32 | read-only | current |
| hpnicfDot11APIfFlowIN OBJECT-TYPE Represents the traffic rate (byte/s) on the downlink interface during a sampling period. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.8 | Unsigned32 | read-only | current |
| hpnicfDot11APIfInUcastPkts OBJECT-TYPE Represents the number of unicast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.9 | Counter32 | read-only | current |
| hpnicfDot11APIfInNUcastPkts OBJECT-TYPE Represents the number of non-unicast packets received on the wired interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.10 | Counter32 | read-only | current |
| hpnicfDot11APIfInDiscardPkts OBJECT-TYPE Represents the number of unicast packets discarded on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.11 | Counter32 | read-only | current |
| hpnicfDot11APIfOutUcastPkts OBJECT-TYPE Represents the number of unicast packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.12 | Counter32 | read-only | current |
| hpnicfDot11APIfOutNUcastPkts OBJECT-TYPE Represents the number of non-unicast packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.13 | Counter32 | read-only | current |
| hpnicfDot11APIfOutDiscardPkts OBJECT-TYPE Represents the number of discarded packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.14 | Counter32 | read-only | current |
| hpnicfDot11APIfOutErrorPkts OBJECT-TYPE Represents the number of error packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.15 | Counter32 | read-only | current |
| hpnicfDot11APIfUpdownTimes OBJECT-TYPE Represents the up/down times on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.16 | Counter32 | read-only | current |
| hpnicfDot11APIfStatusKeepTime OBJECT-TYPE Represents the last change time on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.17 | TimeTicks | read-only | current |
| hpnicfDot11APIfOperStatus OBJECT-TYPE Represents the operational state of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.18 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| hpnicfDot11APIfInBrdcastPkts OBJECT-TYPE Represents the number of broadcast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.19 | Counter64 | read-only | current |
| hpnicfDot11APIfOutBrdcastPkts OBJECT-TYPE Represents the number of broadcast packets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.20 | Counter64 | read-only | current |
| hpnicfDot11APIfInMulcastPkts OBJECT-TYPE Represents the number of multicast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.21 | Counter64 | read-only | current |
| hpnicfDot11APIfOutMulcastPkts OBJECT-TYPE Represents the number of multicast packets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.22 | Counter64 | read-only | current |
| hpnicfDot11APIfInPayloadOctets OBJECT-TYPE Represents the number of actual octets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.23 | Counter64 | read-only | current |
| hpnicfDot11APIfOutPayloadOctets OBJECT-TYPE Represents the number of actual octets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.24 | Counter64 | read-only | current |
| hpnicfDot11RadioMngFrmStatisTable OBJECT-TYPE The table will provide the management frame statistic of this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18 | not-accessible | current | |
| hpnicfDot11RadioMngFrmStatisEntry OBJECT-TYPE Each entry of the table will provide the management frame statistic of this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1 | not-accessible | current | |
| hpnicfDot11MngFrmType OBJECT-TYPE Represents the type of the management frame on this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1.1 | INTEGER {assocReq(1), assocResp(2), reassocReq(3), reassocResp(4), probeReq(5), probeResp(6), beacon(7), atim(8), disassociation(9), authentication(10), deauthentication(11), action(12)} | not-accessible | current |
| hpnicfDot11MngFrmCnt OBJECT-TYPE Represents the total number of each type of management frame on this radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1.2 | Counter32 | read-only | current |
| hpnicfDot11APPacketSizeStatisTable OBJECT-TYPE This table provides packets statistic base on size. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19 | not-accessible | current | |
| hpnicfDot11APPacketSizeStatisEntry OBJECT-TYPE Each entry provides packets statistic base on size for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1 | not-accessible | current | |
| hpnicfDot11APPacketSize OBJECT-TYPE This node represents packet size: sizeLevel1 : size <= 128 sizeLevel2 : 128 < size <= 512 sizeLevel3 : 512 < size <= 1024 sizeLevel4 : size > 1024 | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.1 | INTEGER {sizeLevel1(1), sizeLevel2(2), sizeLevel3(3), sizeLevel4(4)} | not-accessible | current |
| hpnicfDot11APRXPacketSizeCount OBJECT-TYPE Represents the count of packets reception base on frame size. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.2 | Counter64 | read-only | current |
| hpnicfDot11APTXPacketSizeCount OBJECT-TYPE Represents the count of packets transmission base on frame size. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.3 | Counter64 | read-only | current |
| hpnicfDot11APPacketRateStatisTable OBJECT-TYPE This table provides packets statistic base on rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20 | not-accessible | current | |
| hpnicfDot11APPacketRateStatisEntry OBJECT-TYPE Each entry provides packets statistic base on rate for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1 | not-accessible | current | |
| hpnicfDot11APPacketRate OBJECT-TYPE Represents transmit data rate(twice as actual rate). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.1 | Integer32 | not-accessible | current |
| hpnicfDot11APRXPacketRateCount OBJECT-TYPE Represents the count of packets reception base on transmit data rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.2 | Counter64 | read-only | current |
| hpnicfDot11APTXPacketRateCount OBJECT-TYPE Represents the count of packets transmission base on transmit data rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.3 | Counter64 | read-only | current |
| hpnicfDot11APPacketMCSRateStatisTable OBJECT-TYPE This table provides packets statistic base on MCS rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21 | not-accessible | current | |
| hpnicfDot11APPacketMCSRateStatisEntry OBJECT-TYPE Each entry provides packets statistic base on MCS rate for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1 | not-accessible | current | |
| hpnicfDot11APPacketMCSRate OBJECT-TYPE Represents transmit data rate(twice as actual rate). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.1 | Integer32 | not-accessible | current |
| hpnicfDot11APRXPacketMCSRateCount OBJECT-TYPE Represents the count of packets reception base on transmit data rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.2 | Counter64 | read-only | current |
| hpnicfDot11APTXPacketMCSRateCount OBJECT-TYPE Represents the count of packets transmission base on transmit data rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.3 | Counter64 | read-only | current |
| hpnicfDot11APAssocFailStatis3Table OBJECT-TYPE This table will provide statistic of association fails for each AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22 | not-accessible | current | |
| hpnicfDot11APAssocFailStatis3Entry OBJECT-TYPE Each entry will provide statistic of association failure with this AP because of different reasons. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1 | not-accessible | current | |
| hpnicfDot11APAssocFailStatis3SRCnt OBJECT-TYPE This object represents the count of association failure because of lack of resource. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.1 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatis3NSRCnt OBJECT-TYPE This object represents the count of association failure because of not support rate set. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.2 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatis3URCCnt OBJECT-TYPE This object represents the count of association failure because of unknown reason code. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.3 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatis3RFCnt OBJECT-TYPE This object represents the count of association failure because of re-associate failed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.4 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatis3OtherCnt OBJECT-TYPE This object represents the count of association fails because of reason not in 802.11 the protocol. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.5 | Counter32 | read-only | current |
| hpnicfDot11APAssocFailStatisRSSILowCntCM OBJECT-TYPE Represents the count of failed associations due to low RSSI. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.6 | Counter32 | read-only | current |
| hpnicfDot11APIfStatisByAPIDTable OBJECT-TYPE The table will provide the statistics on the interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23 | not-accessible | current | |
| hpnicfDot11APIfStatisByAPIDEntry OBJECT-TYPE Each entry of the table will provide statistics on the interface of the AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1 | not-accessible | current | |
| hpnicfDot11APIfInPkts2 OBJECT-TYPE Represents the total number of packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.1 | Counter64 | read-only | current |
| hpnicfDot11APIfInNormalPkts2 OBJECT-TYPE Represents the total number of correct packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.2 | Counter64 | read-only | current |
| hpnicfDot11APIfInErrorPkts2 OBJECT-TYPE Represents the total number of error packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.3 | Counter64 | read-only | current |
| hpnicfDot11APIfOutPkts2 OBJECT-TYPE Represents the total number of packets sent from the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.4 | Counter64 | read-only | current |
| hpnicfDot11APIfInOctets2 OBJECT-TYPE Represents the total number of octets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.5 | Counter64 | read-only | current |
| hpnicfDot11APIfOutOctets2 OBJECT-TYPE Represents the total number of octets sent from the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.6 | Counter64 | read-only | current |
| hpnicfDot11APIfFlowOut2 OBJECT-TYPE Represents the traffic rate (byte/s) on the uplink interface during a sampling period. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.7 | Unsigned32 | read-only | current |
| hpnicfDot11APIfFlowIN2 OBJECT-TYPE Represents the traffic rate (byte/s) on the downlink interface during a sampling period. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.8 | Unsigned32 | read-only | current |
| hpnicfDot11APIfInUcastPkts2 OBJECT-TYPE Represents the number of unicast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.9 | Counter64 | read-only | current |
| hpnicfDot11APIfInNUcastPkts2 OBJECT-TYPE Represents the number of non-unicast packets received on the wired interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.10 | Counter64 | read-only | current |
| hpnicfDot11APIfInDiscardPkts2 OBJECT-TYPE Represents the number of unicast packets discarded on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.11 | Counter64 | read-only | current |
| hpnicfDot11APIfOutUcastPkts2 OBJECT-TYPE Represents the number of unicast packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.12 | Counter64 | read-only | current |
| hpnicfDot11APIfOutNUcastPkts2 OBJECT-TYPE Represents the number of non-unicast packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.13 | Counter64 | read-only | current |
| hpnicfDot11APIfOutDiscardPkts2 OBJECT-TYPE Represents the number of discarded packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.14 | Counter64 | read-only | current |
| hpnicfDot11APIfOutErrorPkts2 OBJECT-TYPE Represents the number of error packets send on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.15 | Counter64 | read-only | current |
| hpnicfDot11APIfUpdownTimes2 OBJECT-TYPE Represents the up/down times on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.16 | Counter32 | read-only | current |
| hpnicfDot11APIfStatusKeepTime2 OBJECT-TYPE Represents the last change time on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.17 | TimeTicks | read-only | current |
| hpnicfDot11APIfOperStatus2 OBJECT-TYPE Represents the operational state of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.18 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| hpnicfDot11APIfInBrdcastPkts2 OBJECT-TYPE Represents the number of broadcast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.19 | Counter64 | read-only | current |
| hpnicfDot11APIfOutBrdcastPkts2 OBJECT-TYPE Represents the number of broadcast packets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.20 | Counter64 | read-only | current |
| hpnicfDot11APIfInMulcastPkts2 OBJECT-TYPE Represents the number of multicast packets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.21 | Counter64 | read-only | current |
| hpnicfDot11APIfOutMulcastPkts2 OBJECT-TYPE Represents the number of multicast packets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.22 | Counter64 | read-only | current |
| hpnicfDot11APIfInPayloadOctets2 OBJECT-TYPE Represents the number of actual octets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.23 | Counter64 | read-only | current |
| hpnicfDot11APIfOutPayloadOctets2 OBJECT-TYPE Represents the number of actual octets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.24 | Counter64 | read-only | current |
| hpnicfDot11APIfInDataOctets2 OBJECT-TYPE Represents the number of actual data octets received on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.25 | Counter64 | read-only | current |
| hpnicfDot11APIfOutDataOctets2 OBJECT-TYPE Represents the number of actual data octets sent on the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.26 | Counter64 | read-only | current |
| hpnicfDot11APIfAdminStatus OBJECT-TYPE Expected state of the interface. In testing state the interface does not forward any operational packets. When a managed system is initialized, all interfaces start with hpnicfDot11APIfAdminStatus in the down state. As a result of either explicit management action or per configuration information retained by the managed system, hpnicfDot11APIfAdminStatus is then changed to either the up or testing state or remains in the down state. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.27 | INTEGER {up(1), down(2), testing(3)} | read-write | current |
| hpnicfDot11APIfOperStatusCM OBJECT-TYPE Operational status of the interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.28 | INTEGER {up(1), down(2), testing(3), admindown(4)} | read-only | current |
| hpnicfDot11APUserSecAuthStatisTable OBJECT-TYPE The table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24 | not-accessible | current | |
| hpnicfDot11APUserSecAuthStatisEntry OBJECT-TYPE Each entry of the table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1 | not-accessible | current | |
| hpnicfDot11APUserAuthCurNumber OBJECT-TYPE Represents the current number of user authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.1 | Integer32 | read-only | current |
| hpnicfDot11APUserConnFailCnt OBJECT-TYPE Represents the total number of user disconnected with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.2 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthReqCnt OBJECT-TYPE Represents the total number of user authentication request with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.3 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthSuccCnt OBJECT-TYPE Represents the total number of successful authenticated users with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.4 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthFailCnt OBJECT-TYPE Represents the total number of user authentication failures with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.5 | Counter32 | read-only | current |
| hpnicfDot11AllUserOnlineTime OBJECT-TYPE Represents the online time of all successful authenticated users with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.6 | TimeTicks | read-only | current |
| hpnicfDot11APUserInfoStatisTable OBJECT-TYPE The table will provide the user information statistic of this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25 | not-accessible | current | |
| hpnicfDot11APUserInfoStatisEntry OBJECT-TYPE Each entry of the table will provide the user information statistic of this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1 | not-accessible | current | |
| hpnicfDot11APUserMacAddr OBJECT-TYPE Represents the mac address of user logging to this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.1 | MacAddress | not-accessible | current |
| hpnicfDot11APUserIpAddr OBJECT-TYPE Represents the ip address of user logging to this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.2 | IpAddress | read-only | current |
| hpnicfDot11APUserLoginName OBJECT-TYPE Represents the login name of user logging to this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.3 | OCTET STRING | read-only | current |
| hpnicfDot11APUserLoginTime OBJECT-TYPE Represents the login time of user with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.4 | OCTET STRING | read-only | current |
| hpnicfDot11APUserOnlineTime OBJECT-TYPE Represents the online time of user with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.5 | TimeTicks | read-only | current |
| hpnicfDot11APUserLoginNameCM OBJECT-TYPE Represents the login name of dot1x user logging to this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.6 | OCTET STRING | read-only | current |
| hpnicfDot11APUserAuthTypeCM OBJECT-TYPE Represents the authentication type of user with this AP. authFree - There is no need others authentiaction, user will surf internet after association. associateAuth - Include WEP PSK authentication. portalAuth - The authentication lunched by portal pop-up program. autoAuth - 802.1X authentication. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.7 | INTEGER {authFree(1), associateAuth(2), portalAuth(3), autoAuth(4)} | read-only | current |
| hpnicfDot11APUserTxPacketCntCM OBJECT-TYPE Represents the total count of packets sent to online users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.8 | Counter32 | read-only | current |
| hpnicfDot11APUserTxBytesCM OBJECT-TYPE Represents the total bytes sent to online users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.9 | Counter64 | read-only | current |
| hpnicfDot11APUserRxPacketCntCM OBJECT-TYPE Represents the total count of packets received from online users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.10 | Counter32 | read-only | current |
| hpnicfDot11APUserRxBytesCM OBJECT-TYPE Represents the total bytes received from online users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.11 | Counter64 | read-only | current |
| hpnicfDot11APReassocStatis2Table OBJECT-TYPE This table will provide statistic of reassociation for each AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26 | not-accessible | current | |
| hpnicfDot11APReassocStatis2Entry OBJECT-TYPE Each entry will provide statistic of reassociation with this AP because of different reasons. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26.1 | not-accessible | current | |
| hpnicfDot11APReassocFailStatis2Cnt OBJECT-TYPE This object represents the count of reassociation failure because of lack of resource. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26.1.1 | Counter32 | read-only | current |
| hpnicfDot11TrafficTable OBJECT-TYPE The table describes user's traffic based on ssid | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27 | not-accessible | current | |
| hpnicfDot11TrafficEntry OBJECT-TYPE Each entry contains the traffc information of a ssid. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1 | not-accessible | current | |
| hpnicfDot11SSIDIndex OBJECT-TYPE Represents the SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.1 | OCTET STRING | not-accessible | current |
| hpnicfDot11UpPacketNumber OBJECT-TYPE Represents the packet count of up link. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.2 | Counter64 | read-only | current |
| hpnicfDot11UpByteNumber OBJECT-TYPE Represents the byte count of up link. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.3 | Counter64 | read-only | current |
| hpnicfDot11DownPacketNumber OBJECT-TYPE Represents the packet count of down link. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.4 | Counter64 | read-only | current |
| hpnicfDot11DownByteNumber OBJECT-TYPE Represents the byte count of down link. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.5 | Counter64 | read-only | current |
| hpnicfDot11APEchoStatisTable OBJECT-TYPE The table will provide the Echo statistic of this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28 | not-accessible | current | |
| hpnicfDot11APEchoInfoStatisEntry OBJECT-TYPE Each entry of the table will provide the Echo statistic of this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1 | not-accessible | current | |
| hpnicfDot11APEchoAvgDelay OBJECT-TYPE This object represents the average time delay of heart beat in this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.1 | Integer32 | read-only | current |
| hpnicfDot11APEchoRequestCnt OBJECT-TYPE This object represents the count of echo request in this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.2 | Counter64 | read-only | current |
| hpnicfDot11APEchoRespLossCnt OBJECT-TYPE This object represents the loss count of echo response in this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.3 | Counter64 | read-only | current |
| hpnicfDot11APUserSecAuthTypeStatisTable OBJECT-TYPE The table will provide the user authentication type statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29 | not-accessible | current | |
| hpnicfDot11APUserSecAuthTypeStatisEntry OBJECT-TYPE Each entry of the table will provide the user authentication type statistic for this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1 | not-accessible | current | |
| hpnicfDot11APPortalOnlineUserNum OBJECT-TYPE Represents the number of online portal users of this AP, including MAC-trigger and IMSIAuth users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.1 | Integer32 | read-only | current |
| hpnicfDot11APAuthFreeOnlineUserNum OBJECT-TYPE Represents the online number of user free authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.2 | Integer32 | read-only | current |
| hpnicfDot11APAssocAuthOnlineUserNum OBJECT-TYPE Represents the number of online users authenticated by associated authentication with this AP, excluding AutoAuth users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.3 | Integer32 | read-only | current |
| hpnicfDot11APMacAuthOnlineUserNum OBJECT-TYPE Represents the online number of user MAC address authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.4 | Integer32 | read-only | current |
| hpnicfDot11APAllPortalUserOnlineTime OBJECT-TYPE Represents the online time of all user portal authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.5 | TimeTicks | read-only | current |
| hpnicfDot11APAllAuthFreeUserOnlineTime OBJECT-TYPE Represents the online time of all user free authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.6 | TimeTicks | read-only | current |
| hpnicfDot11APAllAssocAuthUserOnlineTime OBJECT-TYPE Represents the online time of all user associated authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.7 | TimeTicks | read-only | current |
| hpnicfDot11APAllMacAuthUserOnlineTime OBJECT-TYPE Represents the online time of all user MAC address authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.8 | TimeTicks | read-only | current |
| hpnicfDot11APPortalUserLostCnntCnt OBJECT-TYPE Represents the lost connective count of user portal authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.9 | Counter32 | read-only | current |
| hpnicfDot11APAuthFreeUserLostCnntCnt OBJECT-TYPE Represents the lost connective count of user free authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.10 | Counter32 | read-only | current |
| hpnicfDot11APAssocAuthUserLostCnntCnt OBJECT-TYPE Represents the lost connective count of user associate authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.11 | Counter32 | read-only | current |
| hpnicfDot11APMacAuthUserLostCnntCnt OBJECT-TYPE Represents the lost connective count of user MAC address authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.12 | Counter32 | read-only | current |
| hpnicfDot11APPortalAuthReqCnt OBJECT-TYPE Represents the request count of user portal authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.13 | Counter32 | read-only | current |
| hpnicfDot11APAssocAuthReqCnt OBJECT-TYPE Represents the request count of user associate authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.14 | Counter32 | read-only | current |
| hpnicfDot11APMacAuthReqCnt OBJECT-TYPE Represents the request count of user MAC address authenticated with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.15 | Counter32 | read-only | current |
| hpnicfDot11APPortalAuthSucCnt OBJECT-TYPE Represents the count of user portal authenticated successed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.16 | Counter32 | read-only | current |
| hpnicfDot11APAssocAuthSucCnt OBJECT-TYPE Represents the count of user associate authenticated successed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.17 | Counter32 | read-only | current |
| hpnicfDot11APMacAuthSucCnt OBJECT-TYPE Represents the count of user MAC address authenticated successed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.18 | Counter32 | read-only | current |
| hpnicfDot11APPortalAuthReqFailCnt OBJECT-TYPE Represents the count of user portal authenticated failed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.19 | Counter32 | read-only | current |
| hpnicfDot11APAssocAuthReqFailCnt OBJECT-TYPE Represents the count of user associate authenticated failed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.20 | Counter32 | read-only | current |
| hpnicfDot11APMacAuthReqFailCnt OBJECT-TYPE Represents the count of user MAC address authenticated failed with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.21 | Counter32 | read-only | current |
| hpnicfDot11APAutoAuthOnlineUserNumCM OBJECT-TYPE Represents the number of online users authenticated by auto authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.22 | Integer32 | read-only | current |
| hpnicfDot11APAllAutoAuthUserOnlineTimeCM OBJECT-TYPE Represents the online time of users authenticated by auto authentication with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.23 | TimeTicks | read-only | current |
| hpnicfDot11APAutoAuthUserLostCnntCntCM OBJECT-TYPE Represents the disconnection count of AutoAuth users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.24 | Counter32 | read-only | current |
| hpnicfDot11APAutoAuthReqCntCM OBJECT-TYPE Represents the count of AutoAuth requests with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.25 | Counter32 | read-only | current |
| hpnicfDot11APAutoAuthSucCntCM OBJECT-TYPE Represents the count of successful AutoAuth authentications with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.26 | Counter32 | read-only | current |
| hpnicfDot11APAutoAuthReqFailCntCM OBJECT-TYPE Represents the count of failed AutoAuth requests with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.27 | Counter32 | read-only | current |
| hpnicfDot11RadioRxStatis64Table OBJECT-TYPE The table will provide the reception statistic for a specific radio of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30 | not-accessible | current | |
| hpnicfDot11RadioRxStatis64Entry OBJECT-TYPE Each entry of the table will provide the reception statistic data for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1 | not-accessible | current | |
| hpnicfDot11Rx64FrameDupCnt OBJECT-TYPE Represents the number of duplicate frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.1 | Counter64 | read-only | current |
| hpnicfDot11Rx64FrameCnt OBJECT-TYPE Represents the number of frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.2 | Counter64 | read-only | current |
| hpnicfDot11Rx64UcastFrameCnt OBJECT-TYPE Represents the number of unicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.3 | Counter64 | read-only | current |
| hpnicfDot11Rx64BcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.4 | Counter64 | read-only | current |
| hpnicfDot11Rx64McastFrameCnt OBJECT-TYPE Represents the number of multicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.5 | Counter64 | read-only | current |
| hpnicfDot11Rx64DiscardFrameCnt OBJECT-TYPE Represents the number of discarded frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.6 | Counter64 | read-only | current |
| hpnicfDot11Rx64FragCnt OBJECT-TYPE Represents the number of frame fragments reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.7 | Counter64 | read-only | current |
| hpnicfDot11Rx64FcsErrCnt OBJECT-TYPE Represents the number of FCS error frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.8 | Counter64 | read-only | current |
| hpnicfDot11Rx64FrameBytes OBJECT-TYPE Represents the bytes of frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.9 | Counter64 | read-only | current |
| hpnicfDot11Rx64UcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.10 | Counter64 | read-only | current |
| hpnicfDot11Rx64BcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.11 | Counter64 | read-only | current |
| hpnicfDot11Rx64McastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.12 | Counter64 | read-only | current |
| hpnicfDot11Rx64DiscardFrameBytes OBJECT-TYPE Represents the bytes of discarded frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.13 | Counter64 | read-only | current |
| hpnicfDot11Rx64MgmtFrameCnt OBJECT-TYPE Represents the number of management frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.14 | Counter64 | read-only | current |
| hpnicfDot11Rx64CtrlFrameCnt OBJECT-TYPE Represents the number of control frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.15 | Counter64 | read-only | current |
| hpnicfDot11Rx64DataFrameCnt OBJECT-TYPE Represents the number of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.16 | Counter64 | read-only | current |
| hpnicfDot11Rx64DecryptErrorCnt OBJECT-TYPE Represents the number of decryption error reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.17 | Counter64 | read-only | current |
| hpnicfDot11Rx64AuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.18 | Counter64 | read-only | current |
| hpnicfDot11Rx64AssociateFrameCnt OBJECT-TYPE Represents the number of associate frame reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.19 | Counter64 | read-only | current |
| hpnicfDot11Rx64PhyErrorCnt OBJECT-TYPE Represents the number of physical error reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.20 | Counter64 | read-only | current |
| hpnicfDot11Rx64MICErrorCnt OBJECT-TYPE Represents the number of MIC verification error reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.21 | Counter64 | read-only | current |
| hpnicfDot11Rx64DataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.22 | Counter64 | read-only | current |
| hpnicfDot11Rx64PayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.23 | Counter64 | read-only | current |
| hpnicfDot11Rx64DataFrameBytesCM OBJECT-TYPE Represents the number of received data frames, excluding retransmitted frames. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.24 | Counter64 | read-only | current |
| hpnicfDot11RadioTxStatis64Table OBJECT-TYPE The table will provide the transmission statistic for a specific radio of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31 | not-accessible | current | |
| hpnicfDot11RadioTxStatis64Entry OBJECT-TYPE Each entry of the table will provide the transmission statistic data for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1 | not-accessible | current | |
| hpnicfDot11Tx64FragCnt OBJECT-TYPE Represents the number of fragmented frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.1 | Counter64 | read-only | current |
| hpnicfDot11Tx64FailedCnt OBJECT-TYPE Represents the number of failures transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.2 | Counter64 | read-only | current |
| hpnicfDot11Tx64RetryCnt OBJECT-TYPE Represents the number of retries transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.3 | Counter64 | read-only | current |
| hpnicfDot11Tx64MultiRetryCnt OBJECT-TYPE Represents the number of transmits that required more than one retry transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.4 | Counter64 | read-only | current |
| hpnicfDot11Tx64RtsSuccessCnt OBJECT-TYPE Represents the number of successful RTS (Request to send) transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.5 | Counter64 | read-only | current |
| hpnicfDot11Tx64RtsFailCnt OBJECT-TYPE Represents the number of RTS failures transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.6 | Counter64 | read-only | current |
| hpnicfDot11Tx64AckFailCnt OBJECT-TYPE Represents the number of acknowledgement failures transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.7 | Counter64 | read-only | current |
| hpnicfDot11Tx64FrameCnt OBJECT-TYPE Represents the total number of frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.8 | Counter64 | read-only | current |
| hpnicfDot11Tx64UcastFrameCnt OBJECT-TYPE Represents the number of unicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.9 | Counter64 | read-only | current |
| hpnicfDot11Tx64BcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.10 | Counter64 | read-only | current |
| hpnicfDot11Tx64McastFrameCnt OBJECT-TYPE Represents the number of multicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.11 | Counter64 | read-only | current |
| hpnicfDot11Tx64DiscardFrameCnt OBJECT-TYPE Represents the number of discarded frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.12 | Counter64 | read-only | current |
| hpnicfDot11Tx64FrameBytes OBJECT-TYPE Represents the total bytes of frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.13 | Counter64 | read-only | current |
| hpnicfDot11Tx64UcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.14 | Counter64 | read-only | current |
| hpnicfDot11Tx64BcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.15 | Counter64 | read-only | current |
| hpnicfDot11Tx64McastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.16 | Counter64 | read-only | current |
| hpnicfDot11Tx64DiscardFrameBytes OBJECT-TYPE Represents the bytes of discard frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.17 | Counter64 | read-only | current |
| hpnicfDot11Tx64AuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.18 | Counter64 | read-only | current |
| hpnicfDot11Tx64AssociateFrameCnt OBJECT-TYPE Represents the number of associate frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.19 | Counter64 | read-only | current |
| hpnicfDot11Tx64DataFrameCnt OBJECT-TYPE Represents the number of data frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.20 | Counter64 | read-only | current |
| hpnicfDot11Tx64DataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.21 | Counter64 | read-only | current |
| hpnicfDot11Tx64MSDUCnt OBJECT-TYPE Represents the total number of MSDU transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.22 | Counter64 | read-only | current |
| hpnicfDot11Tx64DiscardMSDUCnt OBJECT-TYPE Represents the number of discarded MSDU transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.23 | Counter64 | read-only | current |
| hpnicfDot11Tx64RetryMSDUCnt OBJECT-TYPE Represents the number of retransfer MSDU transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.24 | Counter64 | read-only | current |
| hpnicfDot11Tx64PayloadBytes OBJECT-TYPE Represents the payload bytes of data frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.25 | Counter64 | read-only | current |
| hpnicfDot11Tx64MgtFrameCnt OBJECT-TYPE Represents the number of management frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.26 | Counter64 | read-only | current |
| hpnicfDot11Tx64CtrlFrameCnt OBJECT-TYPE Represents the number of control frames transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.27 | Counter64 | read-only | current |
| hpnicfDot11Tx64MACErrCnt OBJECT-TYPE Represents the number of MAC error frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.28 | Counter64 | read-only | current |
| hpnicfDot11Tx64ErrFrameCnt OBJECT-TYPE Represents the number of error frame transmission. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.29 | Counter64 | read-only | current |
| hpnicfDot11BSSRxStatis64Table OBJECT-TYPE The table will provide the reception statistic for a specific BSS on a radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32 | not-accessible | current | |
| hpnicfDot11BSSRxStatis64Entry OBJECT-TYPE Each entry of the table will provide the reception statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1 | not-accessible | current | |
| hpnicfDot11BSSRx64FrameCnt OBJECT-TYPE Represents the number of frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.1 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64FrameBytes OBJECT-TYPE Represents the bytes of frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.2 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64DataFrameCnt OBJECT-TYPE Represents the number of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.3 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64DataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.4 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64AssocFrameCnt OBJECT-TYPE Represents the number of associate frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.5 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64PayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.6 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64UniFrameCnt OBJECT-TYPE Represents the number of unicast frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.7 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64NonUniFrameCnt OBJECT-TYPE Represents the number of non-unicast frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.8 | Counter64 | read-only | current |
| hpnicfDot11BSSRx64AuthenFrameCnt OBJECT-TYPE Represents the number of authentication frames reception with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.9 | Counter64 | read-only | current |
| hpnicfDot11BSSTxStatis64Table OBJECT-TYPE The table will provide the transmission statistic for a specific BSS on a radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33 | not-accessible | current | |
| hpnicfDot11BSSTxStatis64Entry OBJECT-TYPE Each entry of the table will provide the transmission statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1 | not-accessible | current | |
| hpnicfDot11BSSTx64FrameCnt OBJECT-TYPE Represents the total number of frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.1 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64FrameBytes OBJECT-TYPE Represents the total number of bytes transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.2 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64DataFrameCnt OBJECT-TYPE Represents the number of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.3 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64DataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.4 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64AssocFrameCnt OBJECT-TYPE Represents the number of associate frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.5 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64PayloadBytes OBJECT-TYPE Represents the payload bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.6 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64RetryCnt OBJECT-TYPE Represents the number of bytes retransmitted with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.7 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64UniFrameCnt OBJECT-TYPE Represents the number of unicast frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.8 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64NonUniFrameCnt OBJECT-TYPE Represents the number of non-unicast frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.9 | Counter64 | read-only | current |
| hpnicfDot11BSSTx64AuthenFrameCnt OBJECT-TYPE Represents the number of authentication frames transmission with this BSS. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.10 | Counter64 | read-only | current |
| hpnicfDot11APPacketMCSRateStatis2Table OBJECT-TYPE This table provides packet statistics based on MCS rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34 | not-accessible | current | |
| hpnicfDot11APPacketMCSRateStatis2Entry OBJECT-TYPE Each entry provides packet statistics based on MCS rate for each radio of a specific AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1 | not-accessible | current | |
| hpnicfDot11APPacketMCS2Rate OBJECT-TYPE Represents data transmission rate(Tenfold as actual rate). | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.1 | Integer32 (1..2000000000) | not-accessible | current |
| hpnicfDot11APRXPacketMCSRate2Count OBJECT-TYPE Represents the count of packets received based on data transmission rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.2 | Counter64 | read-only | current |
| hpnicfDot11APTXPacketMCSRate2Count OBJECT-TYPE Represents the count of packets transmitted base on data transmission rate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.3 | Counter64 | read-only | current |
| hpnicfDot11APUserSecAuthStatisCMTable OBJECT-TYPE The table provides the user authentication statistics. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35 | not-accessible | current | |
| hpnicfDot11APUserSecAuthStatisCMEntry OBJECT-TYPE Each entry of the table provides the user authentication statistics of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1 | not-accessible | current | |
| hpnicfDot11APUserConnFailCntCM OBJECT-TYPE Represents the failed connection count of users with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.1 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthReqCntCM OBJECT-TYPE Represents the total number of user authentication requests with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.2 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthSuccCntCM OBJECT-TYPE Represents the total number of successful user authentications with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.3 | Counter32 | read-only | current |
| hpnicfDot11APUserAuthFailCntCM OBJECT-TYPE Represents the total number of failed user authentications with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.4 | Counter32 | read-only | current |
| hpnicfDot11AllUserOnlineTimeCM OBJECT-TYPE Represents the online time of all users with this AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.5 | TimeTicks | read-only | current |
| hpnicfDot11APMtNotifyGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3 | |||
| hpnicfDot11APMtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0 | |||
| hpnicfDot11APMtTrapVarObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1 | |||
| hpnicfDot11APMtTrapCfgErrReason OBJECT-TYPE Represents errors caused by configuration operation. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.1 | HpnicfDot11NotifyReasonType | accessible-for-notify | current |
| hpnicfDot11APMtTrapRadioFailReason OBJECT-TYPE Represents errors caused by configuration operation. The following values are supported: config - Configuration error hpnicferror - Hardware error swerror - Software error radar - Radar Detection unknown - Unknown reason | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.2 | INTEGER {config(1), hpnicferror(2), swerror(3), radar(4), unknown(8)} | accessible-for-notify | current |
| hpnicfDot11APMtTrapOldChannel OBJECT-TYPE Represents which channel the radio used to use. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.3 | HpnicfDot11ChannelScopeType | accessible-for-notify | current |
| hpnicfDot11APMtTrapNewChannel OBJECT-TYPE Represents which channel the radio will use. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.4 | HpnicfDot11ChannelScopeType | accessible-for-notify | current |
| hpnicfDot11APChannelChgMode OBJECT-TYPE Represents the channel change mode for a radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.5 | HpnicfDot11RFModeType | accessible-for-notify | current |
| hpnicfDot11APChgWorkMode OBJECT-TYPE Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to detect attack. hybrid - AP will supply WLAN service and detect attack. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.6 | INTEGER {normal(1), monitor(2), hybrid(3)} | accessible-for-notify | current |
| hpnicfDot11APIntfDevMACAddress OBJECT-TYPE Represents MAC address of the device which triggers the notification. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.7 | MacAddress | accessible-for-notify | current |
| hpnicfDot11APMtTrapOldIPAddr OBJECT-TYPE Represents the IP address of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.8 | IpAddress | accessible-for-notify | current |
| hpnicfDot11CurrInterfDetectedNum OBJECT-TYPE Represents the number of interfere detected. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.9 | Integer32 | accessible-for-notify | current |
| hpnicfDot11StaFullReason OBJECT-TYPE Reports which kind maximum number of STA is reached. New STA is not able to associate. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.10 | INTEGER {ap(1), bss(2), radio(3), radioConcur(4), radiopolicy(5), ac(6), acConcur(7), aid(8)} | accessible-for-notify | current |
| hpnicfDot11StaLimitNumber OBJECT-TYPE Represents the limit number of STA. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.11 | Integer32 | accessible-for-notify | current |
| hpnicfDot11APRadioDownReason OBJECT-TYPE Reports the reason why WLAN links is interrupted. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.12 | INTEGER {phyicalUnusable(1), configDisable(2), operatinUnusable(3), apTunnelDown(4)} | accessible-for-notify | current |
| hpnicfDot11InterfMacList OBJECT-TYPE Represents MAC address list of interfere detected. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.13 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11APTrapUserCnt OBJECT-TYPE Represents the online user counter of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.14 | Integer32 | accessible-for-notify | current |
| hpnicfDot11APTrapUserThreshold OBJECT-TYPE Represents threshold of AP's online user counter. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.15 | Integer32 | accessible-for-notify | current |
| hpnicfDot11APMtChanlChgCount OBJECT-TYPE Represents how many times that channel changed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.16 | Integer32 | accessible-for-notify | current |
| hpnicfDot11APMtFormerApVersion OBJECT-TYPE Represents former software version of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.17 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11APMtAPID OBJECT-TYPE To uniquely identify each AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.18 | HpnicfDot11ObjectIDType | accessible-for-notify | current |
| hpnicfDot11APMtRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.19 | HpnicfDot11RadioScopeType | accessible-for-notify | current |
| hpnicfDot11APMtChannel OBJECT-TYPE Represents the current channel allocation for radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.20 | HpnicfDot11ChannelScopeType | accessible-for-notify | current |
| hpnicfDot11APMtInterfMacAdd OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.21 | MacAddress | accessible-for-notify | current |
| hpnicfDot11APMtAdjChannel OBJECT-TYPE Represents the adjacent channel of radio. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.22 | HpnicfDot11ChannelScopeType | accessible-for-notify | current |
| hpnicfDot11APMtFirstTrapTime OBJECT-TYPE Represents the first trap time. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.23 | TimeTicks | accessible-for-notify | current |
| hpnicfDot11APMtTrapAPMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.24 | MacAddress | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfDot11APMtWorkModeChgTrap NOTIFICATION-TYPE The notification will be sent when AP changes the work mode, and hpnicfDot11APWorkMode suggests which work mode will be used by AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.1 | current |
| hpnicfDot11APMtCfgErrorTrap NOTIFICATION-TYPE The notification will represent errors caused by the configuration operation of AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.2 | current |
| hpnicfDot11APMtRadioFailTrap NOTIFICATION-TYPE The notification will notify which the operational status of radio becomes down. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.3 | current |
| hpnicfDot11APMtRadioFailRecoverTrap NOTIFICATION-TYPE The notification will notify the operational status of which radio becomes up again. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.4 | current |
| hpnicfDot11APMtRdoChanlChgTrap NOTIFICATION-TYPE The notification will represent which radio changes the channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.5 | current |
| hpnicfDot11APMtTimeSynFail NOTIFICATION-TYPE The notification will be sent when AC and AP failed to synchronize their time. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.6 | current |
| hpnicfDot11APMtChlIntfDetected NOTIFICATION-TYPE The notification will be sent when some ambient device interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.7 | current |
| hpnicfDot11APMtIntfAPDetected NOTIFICATION-TYPE The notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.8 | current |
| hpnicfDot11APMtIntfStaDetected NOTIFICATION-TYPE The notification will be sent when some ambient station interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.9 | current |
| hpnicfDot11APMtIPChange NOTIFICATION-TYPE The notification will be sent when IP address of the AP changes. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.10 | current |
| hpnicfDot11APFlashWriteFailure NOTIFICATION-TYPE The notification will be sent when AP failed to write data into flash. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.11 | current |
| hpnicfDot11APSysReboot NOTIFICATION-TYPE The notification will be sent when AP reboots. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.12 | current |
| hpnicfDot11APMtAvailChlTooLow NOTIFICATION-TYPE The notification will be sent when number of available channels is too low. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.13 | current |
| hpnicfDot11APImgDwldSuccess NOTIFICATION-TYPE The notification will be sent when AP succeeds to download image from AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.14 | current |
| hpnicfDot11APInterfDetectedTrap NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.15 | current |
| hpnicfDot11APInterfClearTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient APs on the current channel disappears. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.16 | current |
| hpnicfDot11StaInterfDetectedTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient STAs on the current channel disappears. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.17 | current |
| hpnicfDot11StaInterfClearTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient devices on the current channel happens. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.18 | current |
| hpnicfDot11OtherDevIntDetectedTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient devices on the current channel disappears. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.19 | current |
| hpnicfDot11OtherDevIntClearTrap NOTIFICATION-TYPE This notification will be sent when previous ambient device disappeared with the same channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.20 | current |
| hpnicfDot11APModuleTroubleTrap NOTIFICATION-TYPE This notification will be sent when WLAN module failed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.21 | current |
| hpnicfDot11APModuleTroubleClearTrap NOTIFICATION-TYPE The notification will be sent when WLAN module recovered. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.22 | current |
| hpnicfDot11APRadioDownTrap NOTIFICATION-TYPE This notification will be sent when WLAN links interrupted. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.23 | current |
| hpnicfDot11APRadioDownRecovTrap NOTIFICATION-TYPE This notification will be sent when WLAN links recover. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.24 | current |
| hpnicfDot11APStaFullTrap NOTIFICATION-TYPE This notification will be sent when STA number reach limit number. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.25 | current |
| hpnicfDot11APStaFullRecoverTrap NOTIFICATION-TYPE This notification will be sent when STA number recover enough level. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.26 | current |
| hpnicfDot11DFSFreeCntBelowThrRecov NOTIFICATION-TYPE This notification will be sent when available channels number recover enough level. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.27 | current |
| hpnicfDot11APCpuUsageHigh NOTIFICATION-TYPE The notification will be sent when the AP CPU usage exceeds the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.28 | current |
| hpnicfDot11APCpuUsageHighRecover NOTIFICATION-TYPE The notification will be sent when the AP CPU usage descends the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.29 | current |
| hpnicfDot11APMemUsageHigh NOTIFICATION-TYPE The notification will be sent when the AP memory usage exceeds the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.30 | current |
| hpnicfDot11APMemUsageHighRecover NOTIFICATION-TYPE The notification will be sent when the AP memory usage descends the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.31 | current |
| hpnicfDot11APTrapUserCntExceedThre NOTIFICATION-TYPE The notification will be sent when the online user counter exceeds the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.32 | current |
| hpnicfDot11APMtDetectedIntfAP NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.33 | current |
| hpnicfDot11APMtDetectedIntfSTA NOTIFICATION-TYPE This notification will be sent when some ambient STA interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.34 | current |
| hpnicfDot11APMtDetectedIntfOtherDev NOTIFICATION-TYPE This notification will be sent when other device interferes with current channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.35 | current |
| hpnicfDot11DetcAdjChlIntfAP NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with adjacent channel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.36 | current |
| hpnicfDot11DetcAdjChlIntfAPClear NOTIFICATION-TYPE This notification will be sent when interference caused by ambient APs on the adjacent channel disappears. | 1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.37 | current |