HPN-ICF-DOT11-ACMT-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.75.1
- Last updated
- 2010-08-04 18:00
- Revisions
- 2010-08-04 18:00, 2009-08-07 18:00, 2009-07-29 18:00, 2009-05-07 20:00, 2008-07-09 18:00, 2007-12-21 18:00, 2007-06-19 18:00, 2007-04-27 20:00, 2006-05-10 19:00
- Namespace
- hp
- Source file
HPN-ICF-DOT11-ACMT-MIB- Digest
sha256:a1dc1f74c75cae0b6a1ffaefc02f667469e6c11047b87bb0c2f5c060d9bfaa12
Description
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Imports
| From | Symbols |
|---|---|
| HPN-ICF-DOT11-REF-MIB | HpnicfDot11MACModeType, HpnicfDot11ObjectIDType, HpnicfDot11TunnelSecSchemType, hpnicfDot11 |
| IANAifType-MIB | IANAifType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-DOT11-ACMT-MIB HPN-ICF-DOT11-REF-MIB HPN-ICF-OID-MIB IANAifType-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfDot11ACObjectGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1 | |||
| hpnicfDot11ACObject OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1 | |||
| hpnicfDot11CurrentACMACMode OBJECT-TYPE Represents which MAC mode defined in the CAPWAP draft is in use for the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.1 | HpnicfDot11MACModeType | read-only | current |
| hpnicfDot11MaxAPNumPermitted OBJECT-TYPE Represents the maximum number of AP connection permitted for one AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.2 | Integer32 | read-only | current |
| hpnicfDot11MaxStationNumPermitted OBJECT-TYPE Represents the maximum number of station connection permitted for one AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.3 | Integer32 | read-only | current |
| hpnicfDot11RunAPNumThreshold OBJECT-TYPE When the percentage of run AP number is larger than this threshold, a notification will be sent. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4 | Integer32 (30..100) | read-write | current |
| hpnicfDot11ACLoadInfo OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2 | |||
| hpnicfDot11APConnectCount OBJECT-TYPE Represents the total number of APs which are connecting to AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.1 | Integer32 | read-only | current |
| hpnicfDot11StationConnectCount OBJECT-TYPE Represents the total number of stations which are accessing the WLAN service through AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.2 | Integer32 | read-only | current |
| hpnicfDot11ACIFLoadInfoTable OBJECT-TYPE Represents AP number information of interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3 | not-accessible | current | |
| hpnicfDot11ACIFLoadInfoEntry OBJECT-TYPE Each entry represents AP number information of an interface | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1 | not-accessible | current | |
| hpnicfDot11ACIfIndex OBJECT-TYPE Represents index of AC interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.1 | Integer32 | accessible-for-notify | current |
| hpnicfDot11ACIfApNum OBJECT-TYPE Represents AP number connected to the AC interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.2 | Integer32 | read-only | current |
| hpnicfDot11ACIfStaNum OBJECT-TYPE Represents Station number connected to the AC interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.3 | Integer32 | read-only | current |
| hpnicfDot11ACIfName OBJECT-TYPE Represents InterfaceName AP number connected to AC interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.4 | OCTET STRING | read-only | current |
| hpnicfDot11MasterAPCount OBJECT-TYPE Represents the total number of AP which have established the master tunnel with AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.4 | Integer32 | read-only | current |
| hpnicfDot11SlaveAPCount OBJECT-TYPE Represents the total number of AP which have established the slave tunnel with AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.5 | Integer32 | read-only | current |
| hpnicfDot11ConnectAutoAPCount OBJECT-TYPE Represents the total number of auto APs that are connecting to AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.6 | Integer32 | read-only | current |
| hpnicfDot11PersistentAPCount OBJECT-TYPE Represents the total number of persistent AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.7 | Integer32 | read-only | current |
| hpnicfDot11AcUploadFrameCnt OBJECT-TYPE Represents the number of frames that AP sends to AC through LWAPP tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.8 | Counter64 | read-only | current |
| hpnicfDot11AcDownloadFrameCnt OBJECT-TYPE Represents the number of frames that AC sends to AP through LWAPP tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.9 | Counter64 | read-only | current |
| hpnicfDot11AcUploadFrameBytes OBJECT-TYPE Represents the bytes of frames that AP sends to AC through LWAPP tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.10 | Counter64 | read-only | current |
| hpnicfDot11AcDownloadFrameBytes OBJECT-TYPE Represents the bytes of frames that AC sends to AP through LWAPP tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.11 | Counter64 | read-only | current |
| hpnicfDot11BackupACRole OBJECT-TYPE This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.12 | INTEGER {null(1), master(2), slave(3)} | read-only | current |
| hpnicfDot11BackupACNMSIP OBJECT-TYPE This object represents the manger IP address of the slave ac. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.13 | IpAddress | read-only | current |
| hpnicfDot11ACBackupMode OBJECT-TYPE This object represents the ac backup mode. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.14 | INTEGER {null(1), hotBackup(2), coldBackup(3)} | read-only | current |
| hpnicfDot11ACBackupStatus OBJECT-TYPE This object represents the ac backup status. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.15 | INTEGER {active(1), standby(2)} | read-only | current |
| hpnicfDot11ACSwitchCnt OBJECT-TYPE This object represents the ac switch times. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.16 | Integer32 | read-only | current |
| hpnicfDot11ACSouthifPacketOutputCount OBJECT-TYPE Represents the count of output packets with the down-link interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.17 | Counter64 | read-only | current |
| hpnicfDot11ACSouthifPacketOutputBytes OBJECT-TYPE Represents the bytes of output packets with the down-link interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.18 | Counter64 | read-only | current |
| hpnicfDot11ACSouthifPacketInputCount OBJECT-TYPE Represents the count of input packets with the down-link interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.19 | Counter64 | read-only | current |
| hpnicfDot11ACSouthifPacketInputBytes OBJECT-TYPE Represents the bytes of input packets with the down-link interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.20 | Counter64 | read-only | current |
| hpnicfDot11TotalAPconnected OBJECT-TYPE Represents the total number of AP which are connected to AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.21 | Integer32 | read-only | current |
| hpnicfDot11RemainingAPcapacity OBJECT-TYPE Represents the remaining AP capacity of the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.22 | Integer32 | read-only | current |
| hpnicfDot11WLANAssocStatisInfo OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3 | |||
| hpnicfDot11StationAssocSum OBJECT-TYPE Represents the total number of station association. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.1 | Counter32 | read-only | current |
| hpnicfDot11StationAssocFailSum OBJECT-TYPE Represents the total number of station association failure. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.2 | Counter32 | read-only | current |
| hpnicfDot11StationReassocSum OBJECT-TYPE Represents the total number of station reassociation. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.3 | Counter32 | read-only | current |
| hpnicfDot11StationAssocRejectedSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.4 | Counter32 | read-only | current |
| hpnicfDot11StationExDeAuthenSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP). | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.5 | Counter32 | read-only | current |
| hpnicfDot11StationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.6 | Integer32 | read-only | current |
| hpnicfDot11StationAssocReqSum OBJECT-TYPE Represents the total number of station association request. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.7 | Counter32 | read-only | current |
| hpnicfDot11StationReassocReqSum OBJECT-TYPE Represents the total number of station reassociation request. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.8 | Counter32 | read-only | current |
| hpnicfDot11StationReassocFailSum OBJECT-TYPE Represents the total number of station reassociation failure. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.9 | Counter32 | read-only | current |
| hpnicfDot11ACBASInfo OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4 | |||
| hpnicfDot11ACBASSysObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.1 | |||
| hpnicfDot11ACBASTableObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2 | |||
| hpnicfDot11ACBASIfTable OBJECT-TYPE Represents the BAS information of interfaces. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3 | not-accessible | current | |
| hpnicfDot11ACBASIfEntry OBJECT-TYPE Each entry represents the BAS information of an interface | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1 | not-accessible | current | |
| hpnicfDot11ACBASIfIndex OBJECT-TYPE The ifIndex of the BAS interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.1 | Integer32 | not-accessible | current |
| hpnicfDot11ACBASIfDescr OBJECT-TYPE A textual string containing information about the BAS interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.2 | OCTET STRING (SIZE(0..255)) | read-only | current |
| hpnicfDot11ACBASIfType OBJECT-TYPE The type of the BAS interface. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.3 | IANAifType | read-only | current |
| hpnicfDot11ACStaUserSecAuthStatis OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5 | |||
| hpnicfDot11ACStaUserAuthCurNumber OBJECT-TYPE Represents the current number of user authenticated with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.1 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserConnFailCnt OBJECT-TYPE Represents the total number of user disconnected with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.2 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAuthReqCnt OBJECT-TYPE Represents the total number of user authenticate request with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.3 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAuthSuccCnt OBJECT-TYPE Represents the total number of users authenticated successful with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.4 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAuthFailCnt OBJECT-TYPE Represents the total number of user authenticated failed with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.5 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAllAuthCntCM OBJECT-TYPE Represents the total number of users authenticated with this AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.6 | Counter32 | read-only | current |
| hpnicfDot11ACStaSecAuthTypeStatis OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6 | |||
| hpnicfDot11ACStaUserPortalOnlineNum OBJECT-TYPE Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.1 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserFreeAuthOnlineNum OBJECT-TYPE Numbers of online user is no need authenticated. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.2 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserAssociateAuthOnlineNum OBJECT-TYPE Represents the number of online users authenticated by associated authentication, excluding AutoAuth users. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.3 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserMacAuthOnlineNum OBJECT-TYPE The numbers of online user which is launched authentication by MAC address and authenticated by Radius. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.4 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserPortalLostConnectionCnt OBJECT-TYPE For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.5 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserFreeAuthLostConnectionCnt OBJECT-TYPE For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.6 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAssociateAuthLostConnectionCnt OBJECT-TYPE For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.7 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserMacAuthLostConnectionCnt OBJECT-TYPE For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.8 | Counter32 | read-only | current |
| hpnicfDot11ACStaPortalAuthReqCnt OBJECT-TYPE Represents PortalAuth request count after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.9 | Counter32 | read-only | current |
| hpnicfDot11ACStaAssociateAuthReqCnt OBJECT-TYPE Represents AssociateAuth request count after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.10 | Counter32 | read-only | current |
| hpnicfDot11ACStaMacAuthReqCnt OBJECT-TYPE Represents MacAuth request count after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.11 | Counter32 | read-only | current |
| hpnicfDot11ACStaPortalAuthSuccCnt OBJECT-TYPE Represents count of PortalAuth authenticated successfully after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.12 | Counter32 | read-only | current |
| hpnicfDot11ACStaAssociateAuthSuccCnt OBJECT-TYPE Represents count of AssociateAuth authenticated successfully after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.13 | Counter32 | read-only | current |
| hpnicfDot11ACStaMacAuthSuccCnt OBJECT-TYPE Represents count of MacAuth authenticated successfully after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.14 | Counter32 | read-only | current |
| hpnicfDot11ACStaPortalAuthReqFailCnt OBJECT-TYPE Represents count of PortalAuth failure in request after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.15 | Counter32 | read-only | current |
| hpnicfDot11ACStaAssociateAuthReqFailCnt OBJECT-TYPE Represents count of AssociateAuth failure in request after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.16 | Counter32 | read-only | current |
| hpnicfDot11ACStaMacAuthReqFailCnt OBJECT-TYPE Represents count of MacAuth failure in request after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.17 | Counter32 | read-only | current |
| hpnicfDot11ACStaUserAutoAuthOnlineNumCM OBJECT-TYPE Represents the number of online users authenticated by auto authentication. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.18 | Integer32 | read-only | current |
| hpnicfDot11ACStaUserAutoAuthLostConnectionCntCM OBJECT-TYPE Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.19 | Counter32 | read-only | current |
| hpnicfDot11ACStaAutoAuthReqCntCM OBJECT-TYPE Represents the count of AutoAuth requests after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.20 | Counter32 | read-only | current |
| hpnicfDot11ACStaAutoAuthSuccCntCM OBJECT-TYPE Represents the count of successful AutoAuth authentications after AP up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.21 | Counter32 | read-only | current |
| hpnicfDot11ACStaAutoAuthReqFailCntCM OBJECT-TYPE Represents the count of failed AutoAuth requests after AP is up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.22 | Counter32 | read-only | current |
| hpnicfDot11ACPortalStatisticCMTable OBJECT-TYPE The table describes portal statistics information. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7 | not-accessible | current | |
| hpnicfDot11ACPortalStatisticCMEntry OBJECT-TYPE Each entry contains the portal statistics information of an SSID. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1 | not-accessible | current | |
| hpnicfDot11ACPortalStatisticSSIDCM OBJECT-TYPE Represents the service policy name. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.1 | OCTET STRING (SIZE(1..32)) | not-accessible | current |
| hpnicfDot11ACPortalStatAuthReqCM OBJECT-TYPE Represents the total number of portal authentication requests from portal server to AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.2 | Counter32 | read-only | current |
| hpnicfDot11ACPortalStatAuthRespCM OBJECT-TYPE Represents the total number of portal authentication responses from AC to portal server. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.3 | Counter32 | read-only | current |
| hpnicfDot11CAPWAPTunnelGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2 | |||
| hpnicfDot11CAPWAPTunnelTable OBJECT-TYPE The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1 | not-accessible | current | |
| hpnicfDot11CAPWAPTunnelEntry OBJECT-TYPE Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1 | not-accessible | current | |
| hpnicfDot11CurrTunnelAPID OBJECT-TYPE To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1 | HpnicfDot11ObjectIDType | accessible-for-notify | current |
| hpnicfDot11CtrlTunnelCurrSec OBJECT-TYPE Represents what security scheme is in use for control tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.2 | HpnicfDot11TunnelSecSchemType | read-only | current |
| hpnicfDot11CtrlTunnelUpTime OBJECT-TYPE Represents how long for control tunnel up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.3 | Integer32 | read-only | current |
| hpnicfDot11DataTunnelCurrSec OBJECT-TYPE Represents what security scheme is in use for data tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.4 | HpnicfDot11TunnelSecSchemType | read-only | current |
| hpnicfDot11DataTunnelUpTime OBJECT-TYPE Represents how long for data tunnel up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.5 | Integer32 | read-only | current |
| hpnicfDot11CtrlTunnelUpTimeTicks OBJECT-TYPE Represents how long control tunnel is up. If the value is zero, then tunnel is not set up. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.6 | TimeTicks | read-only | current |
| hpnicfDot11ACMtNotifyGroup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3 | |||
| hpnicfDot11ACMtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0 | |||
| hpnicfDot11ACMtTrapVarObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1 | |||
| hpnicfDot11ACMtTrapTunlDwnInfo OBJECT-TYPE Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.1 | INTEGER {tunnelTimeout(1), keyUpdateFailure(2), apReset(3), apCrash(4), apDeleted(5), apCfgChange(6)} | accessible-for-notify | current |
| hpnicfDot11ACMtTrapTunlUpInfo OBJECT-TYPE Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2 | INTEGER {up(1)} | accessible-for-notify | current |
| hpnicfDot11ACMtTrapBackupSwitchInfo OBJECT-TYPE Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.3 | INTEGER {masterToSlave(1), slaveToMaster(2)} | accessible-for-notify | current |
| hpnicfDot11ACMtTrapTnlAPName OBJECT-TYPE Represents name of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11ACMtTrapTnlAPIPAddr OBJECT-TYPE Represents IP address of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5 | IpAddress | accessible-for-notify | current |
| hpnicfDot11LoadBalanceType OBJECT-TYPE Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.6 | INTEGER {traffic(1), session(2)} | accessible-for-notify | current |
| hpnicfDot11LoadBalanceThreshold OBJECT-TYPE Represents the value of load balance threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.7 | Integer32 | accessible-for-notify | current |
| hpnicfDot11ACMtTrapAPIPv6Addr OBJECT-TYPE Represents IPv6 address of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11ACMtTrapTunlDwnCount OBJECT-TYPE Represents how many times that the tunnel between AC and AP has down. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.9 | Integer32 | accessible-for-notify | current |
| hpnicfDot11ACMaxStaNum OBJECT-TYPE Represents the max number of STA on AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.10 | Integer32 | accessible-for-notify | current |
| hpnicfDot11ACMtTrapTnlAPSysName OBJECT-TYPE Represents system name of the AP which sets up the tunnel with the AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.11 | OCTET STRING | accessible-for-notify | current |
| hpnicfDot11ACMtFirstTrapTime OBJECT-TYPE Represents the first trap time. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12 | TimeTicks | accessible-for-notify | current |
| hpnicfDot11ACStatusSwitchInfo OBJECT-TYPE Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.13 | INTEGER {activeToStandby(1), standbyToActive(2)} | accessible-for-notify | current |
| hpnicfDot11SourceACNmsIP OBJECT-TYPE Represents the NMS IP address of master AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.14 | IpAddress | accessible-for-notify | current |
| hpnicfDot11ACMtTrapAPMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15 | MacAddress | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfDot11ACMtTunnelSetupTrap NOTIFICATION-TYPE This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1 | current |
| hpnicfDot11ACMtTunnelDownTrap NOTIFICATION-TYPE This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2 | current |
| hpnicfDot11ACMtBackupSwtTrap NOTIFICATION-TYPE This trap is sent by AC when AC switches from master to slave or from slave to master. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3 | current |
| hpnicfDot11ACLoadBalanceTrap NOTIFICATION-TYPE This trap is sent by AC when load-balance is enabled on AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4 | current |
| hpnicfDot11ACStaFullTrap NOTIFICATION-TYPE This notification will be sent when STA is full on AC. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5 | current |
| hpnicfDot11ACStatusSwitchTrap NOTIFICATION-TYPE This notification will be sent when AC switches from standby to active or from standby to active. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6 | current |
| hpnicfDot11RunAPNumOverload NOTIFICATION-TYPE The notification will be sent by AC when run AP number exceeds the threshold. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7 | current |
| hpnicfDot11RunAPNumOverloadRecover NOTIFICATION-TYPE The notification will be sent by AC when run AP number recover normal from overload state. | 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8 | current |