MIBs Depot

HPN-ICF-DHCPRELAY-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.58
Last updated
2005-06-08 00:00
Revisions
2005-06-08 00:00
Namespace
hp
Source file
HPN-ICF-DHCPRELAY-MIB
Digest
sha256:50630d85225b46127c23aeec7a82202e90292c72b35c0e9d1ae57ac98ca39e16

Description

DHCPR MIB

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicfCommon
IF-MIBifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-DHCPRELAY-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpnicfDHCPRMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.58.1
hpnicfDHCPRIfSelectTable
OBJECT-TYPE
A table for configuring relay mode for interfaces.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.1not-accessiblecurrent
hpnicfDHCPRIfSelectEntry
OBJECT-TYPE
An entry for configuring relay mode for an interface.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1not-accessiblecurrent
hpnicfDHCPRIfSelectRelayMode
OBJECT-TYPE
If the value is on, the DHCP relay function would be enabled on this interface.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1.1INTEGER {on(1), off(2)}read-writecurrent
hpnicfDHCPRIpToGroupTable
OBJECT-TYPE
A table for configuring ip addresses for DHCP server groups.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2not-accessiblecurrent
hpnicfDHCPRIpToGroupEntry
OBJECT-TYPE
An entry for configuring ip addresses for a DHCP server group.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1not-accessiblecurrent
hpnicfDHCPRIpToGroupGroupId
OBJECT-TYPE
Group identifier of DHCP server group.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.1Integer32 (0..19)not-accessiblecurrent
hpnicfDHCPRIpToGroupServerIpType
OBJECT-TYPE
Ip address type of DHCP server.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.2InetAddressTypenot-accessiblecurrent
hpnicfDHCPRIpToGroupServerIp
OBJECT-TYPE
Ip address of DHCP server.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.3InetAddress (SIZE(1..64))not-accessiblecurrent
hpnicfDHCPRIpToGroupRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.4RowStatusread-createcurrent
hpnicfDHCPRIfToGroupTable
OBJECT-TYPE
A table for configuring DHCP server groups for interfaces.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.3not-accessiblecurrent
hpnicfDHCPRIfToGroupEntry
OBJECT-TYPE
An entry for configuring DHCP server group for an interface.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1not-accessiblecurrent
hpnicfDHCPRIfToGroupGroupId
OBJECT-TYPE
The DHCP server group for this interface.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.1Integer32 (0..19)read-writecurrent
hpnicfDHCPRIfToGroupRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.2RowStatusread-createcurrent
hpnicfDHCPRAddrCheckTable
OBJECT-TYPE
A table containing the states of dhcp security address check switchs for interfaces.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.4not-accessiblecurrent
hpnicfDHCPRAddrCheckEntry
OBJECT-TYPE
An entry containing the state of dhcp security address check switch for an interface.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1not-accessiblecurrent
hpnicfDHCPRAddrCheckSwitch
OBJECT-TYPE
The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfDHCPRSecurityTable
OBJECT-TYPE
A table containing the information of DHCP security.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5not-accessiblecurrent
hpnicfDHCPRSecurityEntry
OBJECT-TYPE
An entry containing the information of DHCP security.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1not-accessiblecurrent
hpnicfDHCPRSecurityClientIpAddrType
OBJECT-TYPE
DHCP client's net ip address type
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.1InetAddressTypenot-accessiblecurrent
hpnicfDHCPRSecurityClientIpAddr
OBJECT-TYPE
DHCP client's net ip address
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.2InetAddress (SIZE(1..64))not-accessiblecurrent
hpnicfDHCPRSecurityClientMacAddr
OBJECT-TYPE
DHCP client's mac address
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.3MacAddressread-writecurrent
hpnicfDHCPRSecurityClientProperty
OBJECT-TYPE
Property of client address
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.4INTEGER {static(1), dynamic(2)}read-writecurrent
hpnicfDHCPRSecurityClientRowStatus
OBJECT-TYPE
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.5RowStatusread-createcurrent
hpnicfDHCPRStatisticsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6
hpnicfDHCPRRxClientPktNum
OBJECT-TYPE
The total number of the packets received from DHCP clients by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.1Unsigned32read-onlycurrent
hpnicfDHCPRTxClientPktNum
OBJECT-TYPE
The total number of the brodcast packets transmitted to DHCP clients by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.2Unsigned32read-onlycurrent
hpnicfDHCPRRxServerPktNum
OBJECT-TYPE
The total number of the packets received from DHCP Servers by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.3Unsigned32read-onlycurrent
hpnicfDHCPRTxServerPktNum
OBJECT-TYPE
The total number of the packets transmitted to DHCP Servers by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.4Unsigned32read-onlycurrent
hpnicfDHCPRDiscoverPktNum
OBJECT-TYPE
The total number of the DHCP Discover packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.5Unsigned32read-onlycurrent
hpnicfDHCPRRequestPktNum
OBJECT-TYPE
The total number of the DHCP Request packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.6Unsigned32read-onlycurrent
hpnicfDHCPRDeclinePktNum
OBJECT-TYPE
The total number of the DHCP Decline packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.7Unsigned32read-onlycurrent
hpnicfDHCPRReleasePktNum
OBJECT-TYPE
The total number of the DHCP Release packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.8Unsigned32read-onlycurrent
hpnicfDHCPRInformPktNum
OBJECT-TYPE
The total number of the DHCP Inform packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.9Unsigned32read-onlycurrent
hpnicfDHCPROfferPktNum
OBJECT-TYPE
The total number of the DHCP Offer packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.10Unsigned32read-onlycurrent
hpnicfDHCPRAckPktNum
OBJECT-TYPE
The total number of the DHCP Ack packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.11Unsigned32read-onlycurrent
hpnicfDHCPRNakPktNum
OBJECT-TYPE
The total number of the DHCP Nak packets handled by DHCP relay.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.12Unsigned32read-onlycurrent
hpnicfDHCPRStatisticsReset
OBJECT-TYPE
This node only supports set operation. If the value is true,it will clear all of the packet statistics.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.13TruthValueread-writecurrent
hpnicfDHCPRCycleGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.58.1.7
hpnicfDHCPRCycleStatus
OBJECT-TYPE
If the value is on, the cycle function would be enabled.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.7.1INTEGER {on(1), off(2)}read-writecurrent
hpnicfDHCPRConfigOption82Group
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8
hpnicfDHCPROption82Switch
OBJECT-TYPE
If the value is enabled, DHCP relay supporting option 82 function would be enabled.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.1INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfDHCPROption82HandleStrategy
OBJECT-TYPE
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.2INTEGER {drop(1), keep(2), replace(3)}read-writecurrent
hpnicfDHCPRConfigOption82IfTable
OBJECT-TYPE
A table containing the information of DHCP option 82. This table depends on hpnicfDHCPRIfToGroupTable. An entry of this table will be created when an entry of hpnicfDHCPRIfToGroupTable is created.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3not-accessiblecurrent
hpnicfDHCPRConfigOption82IfEntry
OBJECT-TYPE
An entry containing the information of DHCP option 82.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1not-accessiblecurrent
hpnicfDHCPROption82IfSwitch
OBJECT-TYPE
If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfDHCPROption82IfStrategy
OBJECT-TYPE
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.2INTEGER {drop(1), keep(2), replace(3)}read-writecurrent
hpnicfDHCPROption82IfFormat
OBJECT-TYPE
The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.3INTEGER {normal(1), verbose(2)}read-writecurrent
hpnicfDHCPROption82IfNodeType
OBJECT-TYPE
Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of hpnicfDHCPROption82IfFormat is set with 'verbose'. If the value of hpnicfDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of hpnicfDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of hpnicfDHCPROption82IfUsrDefString must be set simultaneously.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.4INTEGER {invalid(1), mac(2), sysname(3), userdefine(4)}read-writecurrent
hpnicfDHCPROption82IfUsrDefString
OBJECT-TYPE
The string defined by user to fill in the option 82 verbose format. If the value of hpnicfDHCPROption82IfFormat is 'normal', or the value of hpnicfDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of hpnicfDHCPROption82IfNodeType is set with 'userdefine'.
1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.5OCTET STRING (SIZE(0..256))read-writecurrent