MIBs Depot

HPN-ICF-BFD-STD-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.72
Last updated
2014-01-17 12:00
Revisions
2014-01-17 12:00, 2006-05-16 12:00
Namespace
hp
Source file
HPN-ICF-BFD-STD-MIB
Digest
sha256:0d1e5617a90807e99519500bd6afe3b1a874868a687666b4134f79bc342f6838

Description

Bidirectional Forwarding Management Information Base.

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicfCommon
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-BFD-STD-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
BfdDiag
TEXTUAL-CONVENTION
The diagnostic code is used by the BFD specifying the local system's reason for the last session state change, and must be initialized to zero(No Diagnostic). The 'noDiagnostic' means the session keeps state up. The 'controlDetectionTimeExpired' indicates the reason the session enters state down from state up is that the control detection time expires. The 'echoFunctionFailed' indicates the reason the session enters state down from state up is that Echo Function fails. The 'neighborSignaledSessionDown' indicates the reason the session enters state down from state up is that neighbor signals session Down. The 'forwardingPlaneReset' indicates the reason the session enters state down from state up is that the Forwarding Plane resets. The 'pathDown' indicates the reason the session enters state down from state up is that the path state is down. The 'concatenatedPathDown' indicates the reason the session enters state down from state up is that the concatenated path state is down. The 'administrativelyDown' indicates the reason the session enters state down from state up is that the session is kept administratively down by entering the AdminDown state. The 'reverseConcatenatedPathDown' indicates the reason the session enters state down from state up is that reverse concatenated path state is down.
current
BfdInterval
TEXTUAL-CONVENTION
A time interval delay in microseconds, which is used by the BFD.
current
BfdSessIndexTC
TEXTUAL-CONVENTION
An index used to uniquely identify BFD sessions.
current

Objects

NameOIDSyntaxAccessStatus
hpnicfBfdNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.72.0
hpnicfBfdObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.72.1
hpnicfBfdGlobalObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.72.1.1
hpnicfBfdVersionNumber
OBJECT-TYPE
It indicates the BFD session's current version number.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.1Unsigned32read-onlycurrent
hpnicfBfdSysInitMode
OBJECT-TYPE
A system may take either an active role or a passive role in session initialization. A system taking the active role must send BFD control packets for a particular session, regardless of whether it has received any BFD packets for that session. A system taking the passive role must not begin sending BFD packets for a particular session until it has received a BFD packet for that session, and thus has learned the remote system's discriminator value.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.2INTEGER {active(1), passive(2)}read-writecurrent
hpnicfBfdSessNotificationsEnable
OBJECT-TYPE
This variable enables the emission of hpnicfBfdSessStateUp hpnicfBfdSessStateDown and hpnicfBfdSessReachLimit notifications if this variable is set to true(1); otherwise these notifications are not emitted.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.3TruthValueread-writecurrent
hpnicfBfdSessNumberLimit
OBJECT-TYPE
This variable is the active session limit of this device.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.4Unsigned32 (1..4294967295)read-onlycurrent
hpnicfBfdIfTable
OBJECT-TYPE
This Table describes the BFD interface specific information.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2not-accessiblecurrent
hpnicfBfdIfEntry
OBJECT-TYPE
This Entry describes the BFD interface specific information.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1not-accessiblecurrent
hpnicfBfdIfIndex
OBJECT-TYPE
This variable contains an index that represents a unique BFD interface on this device.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.1InterfaceIndexaccessible-for-notifycurrent
hpnicfBfdIfDesiredMinTxInterval
OBJECT-TYPE
This variable defines the minimum interval, in microseconds, that the interface would like to use when transmitting BFD Control packets.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.2BfdIntervalread-writecurrent
hpnicfBfdIfDesiredMinRxInterval
OBJECT-TYPE
This variable defines the minimum interval, in, microseconds, between received BFD Control packets the local system is capable of supporting.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.3BfdIntervalread-writecurrent
hpnicfBfdIfDetectMult
OBJECT-TYPE
The desired detect time multiplier for BFD control packets. The negotiated control packet transmission interval, multiplied by this variable, will be the detection time for this session (as seen by the remote system.) The variable must be a nonzero integer.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.4Unsigned32read-writecurrent
hpnicfBfdIfAuthType
OBJECT-TYPE
The Authentication Type used for this interface. This field is valid only when the Authentication Present bit is set. The 'none' indicates the session doesn't support authentication. The 'simple' indicates the session supports simple password authentication. The 'md5' indicates the session supports Keyed MD5 authentication. The 'mmd5' indicates the session supports Meticulous Keyed MD5 authentication. The 'sha1' indicates the session supports Keyed SHA1 authentication. The 'msha1' indicates the session supports Meticulous Keyed SHA1 authentication.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5INTEGER {none(1), simple(2), md5(3), mmd5(4), sha1(5), msha1(6)}read-onlycurrent
hpnicfBfdSessTable
OBJECT-TYPE
This table describes the BFD sessions.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3not-accessiblecurrent
hpnicfBfdSessEntry
OBJECT-TYPE
This Entry describes the BFD sessions.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1not-accessiblecurrent
hpnicfBfdSessIfIndex
OBJECT-TYPE
This variable contains an interface's index under which the BFD session runs.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.1InterfaceIndexaccessible-for-notifycurrent
hpnicfBfdSessIndex
OBJECT-TYPE
This variable contains an index which represents a unique BFD session on this device.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.2BfdSessIndexTCaccessible-for-notifycurrent
hpnicfBfdSessAppSupportId
OBJECT-TYPE
This variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route protocols. This is a bit-map of possible conditions. The corresponding bit positions are: |0 |none | |1 |ospf | |2 |isis | |3 |bgp | |4 |mpls |
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.3Bits {none(0), ospf(1), isis(2), bgp(3), mpls(4)}read-onlycurrent
hpnicfBfdSessLocalDiscr
OBJECT-TYPE
This variable defines the local discriminator for this BFD session, used to uniquely identify it.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.4Unsigned32 (1..4294967295)read-onlycurrent
hpnicfBfdSessRemoteDiscr
OBJECT-TYPE
This variable defines the session discriminator chosen by the remote system for this BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.5Unsigned32 (1..4294967295)read-onlycurrent
hpnicfBfdSessDstPort
OBJECT-TYPE
The UDP Port for BFD. The default value is the well-known value for this port.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.6InetPortNumberread-onlycurrent
hpnicfBfdSessOperMode
OBJECT-TYPE
This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this mode, the systems periodically send BFD Control packets to one another, and if a number of those packets in a row are not received by the other system, the session is declared to be down. The second mode is known as Demand mode. In this mode, it is assumed that each system has an independent way of verifying that it has connectivity to the other system. Once a BFD session is established, the systems stop sending BFD Control packets, except when either system feels the need to verify connectivity explicitly, in which case a short sequence of BFD Control packets is sent, and then the protocol quiesces. An adjunct to both modes is the Echo function. When the Echo function is active, a stream of BFD Echo packets is transmitted in such a way as to have the other system loop them back through its forwarding path. If a number of packets of the echoed data stream are not received, the session is declared to be down. The Echo function may be used with either Asynchronous or Demand modes. The 'asynchModeWOEchoFun' indicates this BFD session operates in the Asynchronous mode, and doesn't support the Echo Function. The 'demandModeWOEchoFunction' indicates this BFD session operates in the Demand mode, and doesn't support the Echo Function. The 'asyncModeWEchoFun' indicates this BFD session operates in the Asynchronous mode, and also supports the Echo Function. The 'demandModeWEchoFunction' indicates this BFD session operates in the Demand mode, and also supports the Echo Function.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.7INTEGER {asynchModeWOEchoFun(1), demandModeWOEchoFunction(2), asyncModeWEchoFun(3), demandModeWEchoFunction(4)}read-onlycurrent
hpnicfBfdSessAddrType
OBJECT-TYPE
This object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent must return an inconsistentValue error.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.8InetAddressTyperead-onlycurrent
hpnicfBfdSessLocalAddr
OBJECT-TYPE
This variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.9InetAddressread-onlycurrent
hpnicfBfdSessRemoteAddr
OBJECT-TYPE
This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10InetAddressread-onlycurrent
hpnicfBfdSessLocalDiag
OBJECT-TYPE
The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.11BfdDiagread-onlycurrent
hpnicfBfdSessState
OBJECT-TYPE
The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tearing down a session (Down.) This allows a three-way handshake for both session establishment and session teardown (assuring that both systems are aware of all session state changes.) A fourth state (AdminDown) exists so that a session can be administratively put down indefinitely. The Down state means that the session is down (or has just been created.) A session remains in Down state until the remote system indicates that it agrees that the session is down by sending a BFD Control packet with the State field set to anything other than Up. If that packet signals Down state, the session advances to Init state; if that packet signals Init state, the session advances to Up state. Init state means that the remote system is 0communicating, and the local system desires to bring the session up, but the remote system does not yet realize it. A session will remain in Init state until either a BFD Control Packet is received that is signaling Init or Up state (in which case the session advances to Up state) or until the detection time expires, meaning that communication with the remote system has been lost (in which case the session advances to Down state.) Up state means that the BFD session has successfully been established, and implies that connectivity between the systems is working. The session will remain in the Up state until either connectivity fails, or the session is taken down administratively. If either the remote system signals Down state, or the detection time expires, the session advances to Down state. AdminDown state means that the session is being held administratively down. This causes the remote system to enter Down state, and remain there until the local system exits AdminDown state.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.12INTEGER {adminDown(0), down(1), init(2), up(3)}read-onlycurrent
hpnicfBfdSessControlPlanIndepFlag
OBJECT-TYPE
This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent of the control plane. Otherwise, the value is set to false(0)
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.13TruthValueread-onlycurrent
hpnicfBfdSessAuthFlag
OBJECT-TYPE
This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.14TruthValueread-onlycurrent
hpnicfBfdSessDemandModeFlag
OBJECT-TYPE
This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not
1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.15TruthValueread-onlycurrent
hpnicfBfdSessStatTable
OBJECT-TYPE
The table defines BFD session state.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4not-accessiblecurrent
hpnicfBfdSessStatEntry
OBJECT-TYPE
An entry in this table is created by a BFD-enabled node for every BFD Session. It defines BFD session statistics.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1not-accessiblecurrent
hpnicfBfdSessStatPktInHC
OBJECT-TYPE
The total number of BFD messages received by this BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.1Counter64read-onlycurrent
hpnicfBfdSessStatPktOutHC
OBJECT-TYPE
The total number of BFD messages sent by this BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.2Counter64read-onlycurrent
hpnicfBfdSessStatDownCount
OBJECT-TYPE
The number of times this session has gone into the Down state since the router last rebooted.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.3Counter32read-onlycurrent
hpnicfBfdSessStatPktDiscard
OBJECT-TYPE
The number of packets the local system has discarded since the router last rebooted.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.4Counter64read-onlycurrent
hpnicfBfdSessStatPktLost
OBJECT-TYPE
The number of packets the local system has failed to transmit since the router last rebooted.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.5Counter64read-onlycurrent
hpnicfBfdSessPerfTable
OBJECT-TYPE
The table defines BFD session performance.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.5not-accessiblecurrent
hpnicfBfdSessPerfEntry
OBJECT-TYPE
An entry in this table is created by a BFD-enabled node for every BFD session. It defines BFD Session performance.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1not-accessiblecurrent
hpnicfBfdSessPerfCreatTime
OBJECT-TYPE
The value of sysUpTime when the session was created. If no such create event exists this object contains a zero value.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.1TimeStampread-onlycurrent
hpnicfBfdSessPerfLastUpTime
OBJECT-TYPE
The value of sysUpTime when the last time communication was lost. If no such up event exists this variable contains a zero value.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.2TimeStampread-onlycurrent
hpnicfBfdSessPerfLastDownTime
OBJECT-TYPE
The value of sysUpTime when the last time communication was lost with the neighbor. If no such event exist this variable contains a zero value.
1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.3TimeStampread-onlycurrent
hpnicfBfdConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.72.2

Notifications

NameOIDStatus
hpnicfBfdSessStateChange
NOTIFICATION-TYPE
A notification sent when a session changes state, entering state up or entering state down. The session will enter state up finishing three times handshakes , and will enter state down when the communication path is out of work. When the hpnicfBfdSessState's value is state up, the session enters state up, and the session enters state down when the hpnicfBfdSessState's value is state down. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.0.1current
hpnicfBfdSessAuthFail
NOTIFICATION-TYPE
A notification sent when receiving a session with an authentication fail. The hpnicfBfdIfIndex is an index which represents a unique BFD interface on this device.
1.3.6.1.4.1.11.2.14.11.15.2.72.0.2current
hpnicfBfdSessStateUp
NOTIFICATION-TYPE
A notification sent when a session changes state to up. The session will enter state up finishing three times handshakes. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.0.3current
hpnicfBfdSessStateDown
NOTIFICATION-TYPE
A notification sent when a session changes state to down. The session will enter state down when the communication path is out of work. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session.
1.3.6.1.4.1.11.2.14.11.15.2.72.0.4current
hpnicfBfdSessReachLimit
NOTIFICATION-TYPE
A notification would be sent when the number of active BFD sessions reached this device's upper limit and no more session could be activated. The hpnicfBfdSessNumberLimit is the active session limit of this device.
1.3.6.1.4.1.11.2.14.11.15.2.72.0.5current