MIBs Depot

HPN-ICF-ACL-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.2.8
Last updated
2014-07-22 10:00
Revisions
2014-07-22 10:00
Namespace
hp
Source file
HPN-ICF-ACL-MIB
Digest
sha256:92030ac676f8ad54af115ceb9b08c54927cc83370284a85626da4e032f400364

Description

ACL management information base for managing devices that support access control list and packet filtering.

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicfCommon
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-ACL-MIB
HPN-ICF-OID-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
AddressFlag
TEXTUAL-CONVENTION
Address flag to select IPv6 Address. Default value is 'invalid'. t64SrcAddrPre64DestAddrPre(1): The mean of the enumeration 't64SrcAddrPre64DestAddrPre' is that system gets the 64 bits prefix of source address and the 64 bits prefix of destination address. t64SrcAddrPre64DestAddrSuf(2): The mean of the enumeration 't64SrcAddrPre64DestAddrSuf' is that system gets the 64 bits prefix of source address and the 64 bits suffix of destination address. t64SrcAddrSuf64DestAddrPre(3): The mean of the enumeration 't64SrcAddrSuf64DestAddrPre' is that system gets the 64 bits suffix of source address and the 64 bits prefix of destination address. t64SrcAddrSuf64DestAddrSuf(4): The mean of the enumeration 't64SrcAddrSuf64DestAddrSuf' is that system gets the 64 bits suffix of source address and the 64 bits suffix of destination address. t128SourceAddress(5): The mean of the enumeration 't128SourceAddress' is that system gets the 128 bits of source address. t128DestinationAddress(6): The mean of the enumeration 't128SourceAddress' is that system gets the 128 bits of destination address.
current
CounterClear
TEXTUAL-CONVENTION
cleared: Reset the value of the rule's counter. nouse: 'nouse' will be returned when getting.
current
DSCPValue
TEXTUAL-CONVENTION
The value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
current
DirectionType
TEXTUAL-CONVENTION
The direction: inbound or outbound.
current
FragmentFlag
TEXTUAL-CONVENTION
Type of fragment. invalid(0) fragment(1) Frag-Type Fragment fragmentSubseq(2) Frag-Type Fragment-subsequent nonFragment(3) Frag-Type non-Fragment nonSubseq(4) Frag-Type non-subsequent Default value is 'invalid'.
current
PortOp
TEXTUAL-CONVENTION
The operation type of TCP and UDP. lt : Less than given port number. eq : Equal to given port number. gt : Greater than given port number. neq : Not equal to given port number. range : Between two port numbers. Default value is 'invalid'.
current
RuleAction
TEXTUAL-CONVENTION
The value of rule's action. permit: The packet matching the rule will be permitted to forward. deny: The packet matching the rule will be denied.
current
TCPFlag
TEXTUAL-CONVENTION
Type of TCP. invalid(0) tcpack(1) TCP protocol ACK Packet tcpfin(2) TCP protocol PIN Packet tcppsh(3) TCP protocol PUSH Packet tcprst(4) TCP protocol RST Packet tcpsyn(5) TCP protocol SYN Packet tcpurg(6) TCP protocol URG Packet Default value is 'invalid'.
current

Objects

NameOIDSyntaxAccessStatus
hpnicfAclMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.1
hpnicfAclMode
OBJECT-TYPE
Access-list mode.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.1INTEGER {linkBased(1), ipBased(2)}read-writecurrent
hpnicfAclNumGroupTable
OBJECT-TYPE
Configure the match-order of number-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2not-accessiblecurrent
hpnicfAclNumGroupEntry
OBJECT-TYPE
Define the index of hpnicfAclNumGroupTable.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1not-accessiblecurrent
hpnicfAclNumGroupAclNum
OBJECT-TYPE
The index of number-acl group Interface type:1000..1999 Basic type:2000..2999 Advance type:3000..3999 Link type:4000..4999 User type:5000..5999
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.1Integer32 (1000..5999)not-accessiblecurrent
hpnicfAclNumGroupMatchOrder
OBJECT-TYPE
The match-order of number-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.2INTEGER {config(1), auto(2)}read-createcurrent
hpnicfAclNumGroupSubitemNum
OBJECT-TYPE
The number of number-acl group's node.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.3Integer32read-onlycurrent
hpnicfAclNumGroupDescription
OBJECT-TYPE
The description of this acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.4OCTET STRING (SIZE(0..127))read-writecurrent
hpnicfAclNumGroupCountClear
OBJECT-TYPE
Reset the value of rules' counter, which belong to this group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.5INTEGER {cleared(1), nouse(2)}read-createcurrent
hpnicfAclNumGroupRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.6RowStatusread-createcurrent
hpnicfAclNameGroupTable
OBJECT-TYPE
Create acl-group that identified by name.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3not-accessiblecurrent
hpnicfAclNameGroupEntry
OBJECT-TYPE
Define the index of hpnicfAclNameGroupTable.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1not-accessiblecurrent
hpnicfAclNameGroupIndex
OBJECT-TYPE
The index of name-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.1Integer32 (10000..12999)not-accessiblecurrent
hpnicfAclNameGroupCreateName
OBJECT-TYPE
The name of name-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.2OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNameGroupTypes
OBJECT-TYPE
The type of name-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.3INTEGER {basic(1), advanced(2), ifBased(3), link(4), user(5)}read-createcurrent
hpnicfAclNameGroupMatchOrder
OBJECT-TYPE
The match-order of name-acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.4INTEGER {config(1), auto(2)}read-createcurrent
hpnicfAclNameGroupSubitemNum
OBJECT-TYPE
The number of name-acl group's node.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.5Integer32 (0..128)read-onlycurrent
hpnicfAclNameGroupRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.6RowStatusread-createcurrent
hpnicfAclBasicRuleTable
OBJECT-TYPE
Configure the rule for basic acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4not-accessiblecurrent
hpnicfAclBasicRuleEntry
OBJECT-TYPE
Define the index of hpnicfAclBasicRuleTable.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1not-accessiblecurrent
hpnicfAclBasicAclNum
OBJECT-TYPE
The index of basic acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.1Integer32 (0 | 2000..2999 | 10000..12999)not-accessiblecurrent
hpnicfAclBasicSubitem
OBJECT-TYPE
The subindex of basic acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.2Integer32 (0..65535)not-accessiblecurrent
hpnicfAclBasicAct
OBJECT-TYPE
The action of basic acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.3INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclBasicSrcIp
OBJECT-TYPE
Source IP-address of basic acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.4IpAddressread-createcurrent
hpnicfAclBasicSrcWild
OBJECT-TYPE
Source IP-address wild of basic acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.5IpAddressread-createcurrent
hpnicfAclBasicTimeRangeName
OBJECT-TYPE
The Time-range of basic acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.6OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclBasicFragments
OBJECT-TYPE
The flag of matching fragmented packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.7TruthValueread-createcurrent
hpnicfAclBasicLog
OBJECT-TYPE
The flag of log.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.8TruthValueread-createcurrent
hpnicfAclBasicEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.9TruthValueread-onlycurrent
hpnicfAclBasicCount
OBJECT-TYPE
The count of matched by basic rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.10Counter32read-onlycurrent
hpnicfAclBasicCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.11INTEGER {cleared(1), nouse(2)}read-createcurrent
hpnicfAclBasicRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.12RowStatusread-createcurrent
hpnicfAclAdvancedRuleTable
OBJECT-TYPE
Configure the rule for advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5not-accessiblecurrent
hpnicfAclAdvancedRuleEntry
OBJECT-TYPE
Define the index of hpnicfAclAdvancedRuleTable.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1not-accessiblecurrent
hpnicfAclAdvancedAclNum
OBJECT-TYPE
The index of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.1Integer32 (0 | 3000..3999 | 10000..12999)not-accessiblecurrent
hpnicfAclAdvancedSubitem
OBJECT-TYPE
The subindex of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.2Integer32 (0..65535)not-accessiblecurrent
hpnicfAclAdvancedAct
OBJECT-TYPE
The action of Advance acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.3INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclAdvancedProtocol
OBJECT-TYPE
The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.4Integer32 (0..255)read-createcurrent
hpnicfAclAdvancedSrcIp
OBJECT-TYPE
Source IP-address of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.5IpAddressread-createcurrent
hpnicfAclAdvancedSrcWild
OBJECT-TYPE
Source IP-address wild of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.6IpAddressread-createcurrent
hpnicfAclAdvancedSrcOp
OBJECT-TYPE
The source IP-address's operator of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.7INTEGER {invalid(0), lt(1), eq(2), gt(3), neq(4), range(5)}read-createcurrent
hpnicfAclAdvancedSrcPort1
OBJECT-TYPE
The fourth layer source port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.8Integer32 (0..65535)read-createcurrent
hpnicfAclAdvancedSrcPort2
OBJECT-TYPE
The fourth layer source port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.9Integer32 (0..65535)read-createcurrent
hpnicfAclAdvancedDestIp
OBJECT-TYPE
Destination IP-address of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.10IpAddressread-createcurrent
hpnicfAclAdvancedDestWild
OBJECT-TYPE
Destination IP-address wild of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.11IpAddressread-createcurrent
hpnicfAclAdvancedDestOp
OBJECT-TYPE
The destination IP-address's operator of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.12INTEGER {invalid(0), lt(1), eq(2), gt(3), neq(4), range(5)}read-createcurrent
hpnicfAclAdvancedDestPort1
OBJECT-TYPE
The fourth layer destination port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.13Integer32 (0..65535)read-createcurrent
hpnicfAclAdvancedDestPort2
OBJECT-TYPE
The fourth layer destination port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.14Integer32 (0..65535)read-createcurrent
hpnicfAclAdvancedPrecedence
OBJECT-TYPE
The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.15Integer32 (0..7 | 255)read-createcurrent
hpnicfAclAdvancedTos
OBJECT-TYPE
The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.16Integer32 (0..15 | 255)read-createcurrent
hpnicfAclAdvancedDscp
OBJECT-TYPE
The value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.17Integer32 (0..63 | 255)read-createcurrent
hpnicfAclAdvancedEstablish
OBJECT-TYPE
Establish flag.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.18TruthValueread-createcurrent
hpnicfAclAdvancedTimeRangeName
OBJECT-TYPE
The Time-range of advanced acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.19OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclAdvancedIcmpType
OBJECT-TYPE
The type of ICMP packet. Integer32 ICMP type echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-tos-redirect Type=5, Code=3 host-unreachable Type=3, Code=1 information-reply Type=16, Code=0 information-request Type=15, Code=0 net-redirect Type=5, Code=0 net-tos-redirect Type=5, Code=2 net-unreachable Type=3, Code=0 parameter-problem Type=12, Code=0 port-unreachable Type=3, Code=3 protocol-unreachable Type=3, Code=2 reassembly-timeout Type=11, Code=1 source-quench Type=4, Code=0 source-route-failed Type=3, Code=5 timestamp-reply Type=14, Code=0 timestamp-request Type=13, Code=0 ttl-exceeded Type=11, Code=0
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.20Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclAdvancedIcmpCode
OBJECT-TYPE
The code of ICMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.21Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclAdvancedFragments
OBJECT-TYPE
The flag of matching fragmented packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.22TruthValueread-createcurrent
hpnicfAclAdvancedLog
OBJECT-TYPE
The flag of log.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.23TruthValueread-createcurrent
hpnicfAclAdvancedEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.24TruthValueread-onlycurrent
hpnicfAclAdvancedCount
OBJECT-TYPE
The count of matched by advanced rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.25Counter32read-onlycurrent
hpnicfAclAdvancedCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.26INTEGER {cleared(1), nouse(2)}read-createcurrent
hpnicfAclAdvancedRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.27RowStatusread-createcurrent
hpnicfAclIfRuleTable
OBJECT-TYPE
Configure the rule for interface-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6not-accessiblecurrent
hpnicfAclIfRuleEntry
OBJECT-TYPE
Define the index of hpnicfAclIfRuleTable.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1not-accessiblecurrent
hpnicfAclIfAclNum
OBJECT-TYPE
The index of interface-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.1Integer32 (0 | 1000..1999 | 10000..12999)not-accessiblecurrent
hpnicfAclIfSubitem
OBJECT-TYPE
The subindex of interface-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.2Integer32 (0..65535)not-accessiblecurrent
hpnicfAclIfAct
OBJECT-TYPE
The action of interface-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.3INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclIfIndex
OBJECT-TYPE
The index of interface.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.4Integer32 (0..2147483647)read-createcurrent
hpnicfAclIfAny
OBJECT-TYPE
The flag of matching any interface.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.5TruthValueread-createcurrent
hpnicfAclIfTimeRangeName
OBJECT-TYPE
The Time-range of interface-based acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.6OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIfLog
OBJECT-TYPE
The flag of log.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.7TruthValueread-createcurrent
hpnicfAclIfEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.8TruthValueread-onlycurrent
hpnicfAclIfCount
OBJECT-TYPE
The count of matched by basic rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.9Counter32read-onlycurrent
hpnicfAclIfCountClear
OBJECT-TYPE
Reset the value of the rule's counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.10INTEGER {cleared(1), nouse(2)}read-createcurrent
hpnicfAclIfRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.11RowStatusread-createcurrent
hpnicfAclLinkTable
OBJECT-TYPE
Create link acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7not-accessiblecurrent
hpnicfAclLinkEntry
OBJECT-TYPE
The entry of the link acl table.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1not-accessiblecurrent
hpnicfAclLinkAclNum
OBJECT-TYPE
The index of link-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.1Integer32 (0 | 4000..4999 | 10000..12999)not-accessiblecurrent
hpnicfAclLinkSubitem
OBJECT-TYPE
The subindex of link-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.2Integer32 (0..65535)not-accessiblecurrent
hpnicfAclLinkAct
OBJECT-TYPE
The action of link-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.3INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclLinkProtocol
OBJECT-TYPE
The layer 2 protocol-type of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.4INTEGER {invalid(0), ip(2048), arp(2054), rarp(32821), mpls(34887), pppoeControl(34915), pppoeData(34916)}read-createcurrent
hpnicfAclLinkFormatType
OBJECT-TYPE
Format type of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.5INTEGER {invalid(0), ethernetII(1), snap(2), ieee802Dot3And2(3), ieee802Dot3(4)}read-createcurrent
hpnicfAclLinkVlanTag
OBJECT-TYPE
The flag of vlan tag of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.6INTEGER {invalid(0), tagged(1), untagged(2)}read-createcurrent
hpnicfAclLinkVlanPri
OBJECT-TYPE
Vlan priority of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.7Integer32 (0..7 | 255)read-createcurrent
hpnicfAclLinkSrcVlanId
OBJECT-TYPE
Source vlan ID of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.8Integer32 (0..4094)read-createcurrent
hpnicfAclLinkSrcMac
OBJECT-TYPE
Source mac of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.9MacAddressread-createcurrent
hpnicfAclLinkSrcMacWild
OBJECT-TYPE
Source mac wildzard of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.10MacAddressread-createcurrent
hpnicfAclLinkSrcIfIndex
OBJECT-TYPE
Source IfIndex of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.11Integer32 (0..2147483647)read-createcurrent
hpnicfAclLinkSrcAny
OBJECT-TYPE
The flag of matching any source.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.12TruthValueread-createcurrent
hpnicfAclLinkDestVlanId
OBJECT-TYPE
Destination vlan ID of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.13Integer32 (0..4094)read-createcurrent
hpnicfAclLinkDestMac
OBJECT-TYPE
Destination mac of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.14MacAddressread-createcurrent
hpnicfAclLinkDestMacWild
OBJECT-TYPE
Destination mac wildzard of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.15MacAddressread-createcurrent
hpnicfAclLinkDestIfIndex
OBJECT-TYPE
Destination IfIndex of link acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.16Integer32 (0..2147483647)read-createcurrent
hpnicfAclLinkDestAny
OBJECT-TYPE
The flag of matching any destination.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.17TruthValueread-createcurrent
hpnicfAclLinkTimeRangeName
OBJECT-TYPE
The Time-range of link-based acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.18OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclLinkEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.19TruthValueread-onlycurrent
hpnicfAclLinkRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.20RowStatusread-createcurrent
hpnicfAclLinkTypeCode
OBJECT-TYPE
The type of layer 2 protocol.0x0000...0xffff.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.21OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclLinkTypeMask
OBJECT-TYPE
The mask of layer 2 protocol.0x0000...0xffff.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.22OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclLinkLsapCode
OBJECT-TYPE
The type of LSAP.0x0000...0xffff.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.23OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclLinkLsapMask
OBJECT-TYPE
The mask of LSAP.0x0000...0xffff.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.24OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclLinkL2LabelRangeOp
OBJECT-TYPE
Operation symbol of the MPLS label. If the symbol is range(5), the objects hpnicfAclLinkL2LabelRangeBegin and hpnicfAclLinkL2LabelRangeEnd should have different values indicating a range. Otherwise, only hpnicfAclLinkL2LabelRangeBegin counts, object hpnicfAclLinkL2LabelRangeEnd is ignored. invalid(0) -- unavailable lt(1) -- less than eq(2) -- equal gt(3) -- great than neq(4) -- not equal range(5) -- a range with two ends included
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.25INTEGER {invalid(0), lt(1), eq(2), gt(3), neq(4), range(5)}read-createcurrent
hpnicfAclLinkL2LabelRangeBegin
OBJECT-TYPE
The beginning of VPLS VC label.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.26Integer32read-createcurrent
hpnicfAclLinkL2LabelRangeEnd
OBJECT-TYPE
The end of VPLS VC label.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.27Integer32read-createcurrent
hpnicfAclLinkMplsExp
OBJECT-TYPE
The value of MPLS-packet's Exp.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.28Integer32read-createcurrent
hpnicfAclUserTable
OBJECT-TYPE
Create user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8not-accessiblecurrent
hpnicfAclUserEntry
OBJECT-TYPE
The entry of user acl table.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1not-accessiblecurrent
hpnicfAclUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.1Integer32 (0 | 5000..5999 | 10000..12999)not-accessiblecurrent
hpnicfAclUserSubitem
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.2Integer32 (0..65535)not-accessiblecurrent
hpnicfAclUserAct
OBJECT-TYPE
The action of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.3INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclUserFormatType
OBJECT-TYPE
Format type.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.4INTEGER {invalid(0), ethernetII(1), snap(2), ieee802Dot2And3(3), ieee802Dot4(4)}read-createcurrent
hpnicfAclUserVlanTag
OBJECT-TYPE
Vlan tag exits or not.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.5INTEGER {invalid(0), tagged(1), untagged(2)}read-createcurrent
hpnicfAclUserRuleStr
OBJECT-TYPE
Rule string.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.6OCTET STRING (SIZE(1..80))read-createcurrent
hpnicfAclUserRuleMask
OBJECT-TYPE
Rule mask.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.7OCTET STRING (SIZE(1..80))read-createcurrent
hpnicfAclUserTimeRangeName
OBJECT-TYPE
The Time-range of the user defined acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.8OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclUserEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.9TruthValueread-onlycurrent
hpnicfAclUserRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.10RowStatusread-createcurrent
hpnicfAclActiveTable
OBJECT-TYPE
Active acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9not-accessiblecurrent
hpnicfAclActiveEntry
OBJECT-TYPE
The entry of active acl table.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1not-accessiblecurrent
hpnicfAclActiveAclIndex
OBJECT-TYPE
Acl index.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.1Integer32 (0 | 1..5999 | 10000..12999)not-accessiblecurrent
hpnicfAclActiveIfIndex
OBJECT-TYPE
IfIndex.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.2Integer32 (0..2147483647)not-accessiblecurrent
hpnicfAclActiveVlanID
OBJECT-TYPE
The lower 16 bits is Vlan ID, the higher 16 bits, if not zero, it describes the slot ID of the L3plus board.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.3Integer32not-accessiblecurrent
hpnicfAclActiveDirection
OBJECT-TYPE
Direction.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.4INTEGER {invalid(0), input(1), output(2), both(3)}not-accessiblecurrent
hpnicfAclActiveUserAclNum
OBJECT-TYPE
The number of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.5Integer32 (0 | 5000..5999 | 10000..12999)read-createcurrent
hpnicfAclActiveUserAclSubitem
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.6Integer32 (0..65535)read-createcurrent
hpnicfAclActiveIpAclNum
OBJECT-TYPE
The number of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.7Integer32 (0 | 2000..3999 | 10000..12999)read-createcurrent
hpnicfAclActiveIpAclSubitem
OBJECT-TYPE
The subitem of the IP acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.8Integer32 (0..65535)read-createcurrent
hpnicfAclActiveLinkAclNum
OBJECT-TYPE
The num of the link acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.9Integer32 (0 | 4000..4999 | 10000..12999)read-createcurrent
hpnicfAclActiveLinkAclSubitem
OBJECT-TYPE
The subitem of the link acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.10Integer32 (0..65535)read-createcurrent
hpnicfAclActiveRuntime
OBJECT-TYPE
Is run or not.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.11TruthValueread-onlycurrent
hpnicfAclActiveRowStatus
OBJECT-TYPE
RowStatus, now support three state: CreateAndGo, Active, Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.12RowStatusread-createcurrent
hpnicfAclIDSTable
OBJECT-TYPE
Configure the rule for IDS.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10not-accessiblecurrent
hpnicfAclIDSEntry
OBJECT-TYPE
The entry of acl ids table.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1not-accessiblecurrent
hpnicfAclIDSName
OBJECT-TYPE
The name index of the IDS table.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.1OCTET STRING (SIZE(1..32))not-accessiblecurrent
hpnicfAclIDSSrcMac
OBJECT-TYPE
Source mac of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.2MacAddressread-createcurrent
hpnicfAclIDSDestMac
OBJECT-TYPE
Destination mac of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.3MacAddressread-createcurrent
hpnicfAclIDSSrcIp
OBJECT-TYPE
Source IP-address of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.4IpAddressread-createcurrent
hpnicfAclIDSSrcWild
OBJECT-TYPE
Source IP-address wild of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.5IpAddressread-createcurrent
hpnicfAclIDSDestIp
OBJECT-TYPE
Destination IP-address of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.6IpAddressread-createcurrent
hpnicfAclIDSDestWild
OBJECT-TYPE
Destination IP-address wild of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.7IpAddressread-createcurrent
hpnicfAclIDSSrcPort
OBJECT-TYPE
The fourth layer source port.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.8Integer32 (0..65535)read-createcurrent
hpnicfAclIDSDestPort
OBJECT-TYPE
The fourth layer destination port.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.9Integer32 (0..65535)read-createcurrent
hpnicfAclIDSProtocol
OBJECT-TYPE
The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.10Integer32 (0..255)read-createcurrent
hpnicfAclIDSDenyTime
OBJECT-TYPE
The maximum number of seconds which deny for this acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.11Unsigned32read-createcurrent
hpnicfAclIDSAct
OBJECT-TYPE
The action of IDS acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.12INTEGER {permit(1), deny(2)}read-createcurrent
hpnicfAclIDSRowStatus
OBJECT-TYPE
RowStatus, now supports three states: CreateAndGo, Active, and Destroy.
1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.13RowStatusread-createcurrent
hpnicfAclMib2Objects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2
hpnicfAclMib2GlobalGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1
hpnicfAclMib2NodesGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1
hpnicfAclMib2Mode
OBJECT-TYPE
The applying mode of ACL.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.1INTEGER {linkBased(1), ipBased(2)}read-writecurrent
hpnicfAclMib2Version
OBJECT-TYPE
The version of this file. The output value has the format of 'xx'or 'xxx'. For example: 10 means 1.0; 125 means 12.5.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.2Integer32read-onlycurrent
hpnicfAclMib2ObjectsCapabilities
OBJECT-TYPE
The objects of hpnicfAclMib2Objects.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.3Bits {hpnicfAclMib2Mode(0), hpnicfAclVersion(1), hpnicfAclMib2ObjectsCapabilities(2), hpnicfAclMib2CapabilityTable(3), hpnicfAclNumberGroupTable(4), hpnicfAclIPAclBasicTable(5), hpnicfAclIPAclAdvancedTable(6), hpnicfAclMACTable(7), hpnicfAclEnUserTable(8), hpnicfAclMib2ProcessingStatus(9)}read-onlycurrent
hpnicfAclMib2ProcessingStatus
OBJECT-TYPE
The processing status of ACL operation.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.4INTEGER {processing(1), done(2)}read-onlycurrent
hpnicfAclMib2CapabilityTable
OBJECT-TYPE
The capability of mib2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2not-accessiblecurrent
hpnicfAclMib2CapabilityEntry
OBJECT-TYPE
The information of Capability of mib2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1not-accessiblecurrent
hpnicfAclMib2EntityType
OBJECT-TYPE
The type of entity. system: The entity is systemic level. interface: The entity is interface level.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.1INTEGER {system(1), interface(2)}not-accessiblecurrent
hpnicfAclMib2EntityIndex
OBJECT-TYPE
The index of entity. If hpnicfAclMib2EntityType is system, the value of this object is 0. If hpnicfAclMib2EntityType is interface, the value of this object is equal to 'ifIndex'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.2Integer32 (0..2147483647)not-accessiblecurrent
hpnicfAclMib2ModuleIndex
OBJECT-TYPE
The module index of ACL.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.3INTEGER {layer3(1), layer2(2), userDefined(3)}not-accessiblecurrent
hpnicfAclMib2CharacteristicsIndex
OBJECT-TYPE
The characteristics index of mib2. See DESCRIPTION of hpnicfAclMib2CharacteristicsValue to get detail information about the value of this object.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.4Integer32 (0..2147483647)not-accessiblecurrent
hpnicfAclMib2CharacteristicsDesc
OBJECT-TYPE
The description of characteristics.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.5OCTET STRING (SIZE(0..255))read-onlycurrent
hpnicfAclMib2CharacteristicsValue
OBJECT-TYPE
The value of capability of this object. TypeOfRuleStringValue : notSupport(0) and the length of RuleString. TypeOfCodeValue : OnlyOneNotSupport(0), MoreThanOneNotSupport(1) If hpnicfAclMib2CharacteristicsValue is 'moreThanOneNotSupport', hpnicfAclMib2CharacteristicsDesc must be used to depict which protocols are not supported. The output value of hpnicfAclMib2CharacteristicsDesc has the format of 'a,b'. For example, 'ip,rarp'. layer3 Module: Index Characteristics value 1 SourceIPAddress notSupport(0) 2 DestinationIPAddress notSupport(0) 3 SourcePort notSupport(0) 4 DestinationPort notSupport(0) 5 IPPrecedence notSupport(0) 6 TOS notSupport(0) 7 DSCP notSupport(0) 8 TCPFlag notSupport(0) 9 FragmentFlag notSupport(0) 10 Log notSupport(0) 11 RuleMatchCounter notSupport(0) 12 ResetRuleMatchCounter notSupport(0) 13 VPN notSupport(0) 15 protocol notSupport(0) 16 AddressFlag notSupport(0) layer2 Module: Index Characteristics value 1 ProtocolType TypeOfCodeValue 2 SourceMAC notSupport(0) 3 DestinationMAC notSupport(0) 4 LSAPType TypeOfCodeValue 5 CoS notSupport(0) UserDefined Module: Index Characteristics value 1 UserDefaultOffset TypeOfRuleStringValue 2 UserL2RuleOffset TypeOfRuleStringValue 3 UserMplsOffset TypeOfRuleStringValue 4 UserIPv4Offset TypeOfRuleStringValue 5 UserIPv6Offset TypeOfRuleStringValue 6 UserL4Offset TypeOfRuleStringValue 7 UserL5Offset TypeOfRuleStringValue
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.6Unsigned32read-onlycurrent
hpnicfAclNumberGroupTable
OBJECT-TYPE
A table of the number acl group information.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3not-accessiblecurrent
hpnicfAclNumberGroupEntry
OBJECT-TYPE
Number acl group information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1not-accessiblecurrent
hpnicfAclNumberGroupType
OBJECT-TYPE
The type of number group. Basic ACL and Advanced ACL support ipv4 and ipv6. The range of Basic ACL is from 2000 to 2999. The range of Advanced ACL is from 3000 to 3999. Simple ACL supports ipv6 only. The range of Simple ACL is from 10000 to 42767. MAC ACL support mac only. The range of MAC ACL is from 4000 to 4999. User-defined ACL support user only. The range of user-defined ACL is from 5000 to 5999.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.1INTEGER {ipv4(1), ipv6(2), mac(3), user(4)}not-accessiblecurrent
hpnicfAclNumberGroupIndex
OBJECT-TYPE
The group index of number acl. Basic type:2000..2999 Advanced type:3000..3999 MAC type:4000..4999 User type:5000..5999 Simple type:10000..42767
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.2Integer32 (2000..5999 | 10000..42767)not-accessiblecurrent
hpnicfAclNumberGroupRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.3RowStatusread-createcurrent
hpnicfAclNumberGroupMatchOrder
OBJECT-TYPE
The match-order of number acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.4INTEGER {config(1), auto(2)}read-createcurrent
hpnicfAclNumberGroupStep
OBJECT-TYPE
The step of rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.5Integer32 (1..20)read-createcurrent
hpnicfAclNumberGroupDescription
OBJECT-TYPE
Description of this acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.6OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclNumberGroupCountClear
OBJECT-TYPE
Reset the value of counters of this group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.7CounterClearread-writecurrent
hpnicfAclNumberGroupRuleCounter
OBJECT-TYPE
The rule count of number acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.8Counter32read-onlycurrent
hpnicfAclNumberGroupName
OBJECT-TYPE
Name of this acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.9OCTET STRING (SIZE(0..63))read-createcurrent
hpnicfAclNamedGroupTable
OBJECT-TYPE
A table of the named ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4not-accessiblecurrent
hpnicfAclNamedGroupEntry
OBJECT-TYPE
Named ACL group entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1not-accessiblecurrent
hpnicfAclNamedGroupCategory
OBJECT-TYPE
The category of number group. 1 indicates basic ACL, 2 indicates advanced ACL.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.1INTEGER {invalid(0), basic(1), advanced(2)}not-accessiblecurrent
hpnicfAclNamedGroupName
OBJECT-TYPE
Name of an ACL group, a case-insensitive string of 1 to 63 characters. It must start with an English letter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.2OCTET STRING (SIZE(1..63))not-accessiblecurrent
hpnicfAclNamedGroupRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.3RowStatusread-createcurrent
hpnicfAclNamedGroupMatchOrder
OBJECT-TYPE
The match-order of name acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.4INTEGER {config(1), auto(2)}read-createcurrent
hpnicfAclNamedGroupStep
OBJECT-TYPE
The numbering step of the increment of the rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.5Integer32 (1..20)read-createcurrent
hpnicfAclNamedGroupDescription
OBJECT-TYPE
Description of this ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.6OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclNamedGroupCountClear
OBJECT-TYPE
Reset the statistics counter of this group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.7CounterClearread-writecurrent
hpnicfAclNamedGroupRuleCounter
OBJECT-TYPE
The amount of rules of this group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.4.1.8Counter32read-onlycurrent
hpnicfAclIPAclGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2
hpnicfAclIPAclBasicTable
OBJECT-TYPE
A table of basic rule group. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2not-accessiblecurrent
hpnicfAclIPAclBasicEntry
OBJECT-TYPE
Basic rule group information.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1not-accessiblecurrent
hpnicfAclIPAclBasicRuleIndex
OBJECT-TYPE
The rule index of basic acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.1Integer32 (0..65534)not-accessiblecurrent
hpnicfAclIPAclBasicRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.2RowStatusread-createcurrent
hpnicfAclIPAclBasicAct
OBJECT-TYPE
The action of basic acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.3RuleActionread-createcurrent
hpnicfAclIPAclBasicSrcAddrType
OBJECT-TYPE
The IP addresses type of IP pool.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.4InetAddressTyperead-createcurrent
hpnicfAclIPAclBasicSrcAddr
OBJECT-TYPE
The value of a local IP address is available for this association. The type of this address is determined by the value of hpnicfAclIPAclBasicSrcAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.5InetAddressread-createcurrent
hpnicfAclIPAclBasicSrcPrefix
OBJECT-TYPE
Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.6InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclBasicSrcAny
OBJECT-TYPE
The flag of matching any IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.7TruthValueread-createcurrent
hpnicfAclIPAclBasicSrcWild
OBJECT-TYPE
Source IPv4 address wildcard mask. Only IPv4 Basic Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.8IpAddressread-createcurrent
hpnicfAclIPAclBasicTimeRangeName
OBJECT-TYPE
The Time-range of basic acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.9OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclBasicFragmentFlag
OBJECT-TYPE
The flag of matching fragmented packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.10FragmentFlagread-createcurrent
hpnicfAclIPAclBasicLog
OBJECT-TYPE
The packet will be logged when it matches the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.11TruthValueread-createcurrent
hpnicfAclIPAclBasicCount
OBJECT-TYPE
The count of matches by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.12Unsigned32read-onlycurrent
hpnicfAclIPAclBasicCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.13CounterClearread-writecurrent
hpnicfAclIPAclBasicEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.14TruthValueread-onlycurrent
hpnicfAclIPAclBasicVpnInstanceName
OBJECT-TYPE
The VPN name, to which the rule will be applied. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.15OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclBasicComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.16OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclIPAclBasicCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.17TruthValueread-createcurrent
hpnicfAclIPAclBasicRouteTypeAny
OBJECT-TYPE
The flag of matching any type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.18TruthValueread-createcurrent
hpnicfAclIPAclBasicRouteTypeValue
OBJECT-TYPE
Match specific type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.19Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclAdvancedTable
OBJECT-TYPE
A table of advanced and simple acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3not-accessiblecurrent
hpnicfAclIPAclAdvancedEntry
OBJECT-TYPE
Advanced acl group information.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1not-accessiblecurrent
hpnicfAclIPAclAdvancedRuleIndex
OBJECT-TYPE
The rule index of advanced acl group. As a Simple ACL group, the value of this object must be 0. As an Advanced ACL group, the value of this object is ranging from 0 to 65534.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.1Integer32 (0..65534)not-accessiblecurrent
hpnicfAclIPAclAdvancedRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.2RowStatusread-createcurrent
hpnicfAclIPAclAdvancedAct
OBJECT-TYPE
The action of advanced acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.3RuleActionread-createcurrent
hpnicfAclIPAclAdvancedProtocol
OBJECT-TYPE
The protocol-type of advanced acl group. 0 indicates any IPv4 or IPv6 protocol. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Message Protocol6(58) igmp Internet Group Management Protocol(2) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) ipv6-ah IPv6 Authentication Header(51) ipv6-esp IPv6 Encapsulating Security Payload(50)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.4Integer32 (0..255)read-createcurrent
hpnicfAclIPAclAdvancedAddrFlag
OBJECT-TYPE
Address flag to select address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.5AddressFlagread-createcurrent
hpnicfAclIPAclAdvancedSrcAddrType
OBJECT-TYPE
The IP addresses type of IP pool.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.6InetAddressTyperead-createcurrent
hpnicfAclIPAclAdvancedSrcAddr
OBJECT-TYPE
The value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedSrcAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.7InetAddressread-createcurrent
hpnicfAclIPAclAdvancedSrcPrefix
OBJECT-TYPE
Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.8InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclAdvancedSrcAny
OBJECT-TYPE
The flag of matching any IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.9TruthValueread-createcurrent
hpnicfAclIPAclAdvancedSrcWild
OBJECT-TYPE
Source IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.10IpAddressread-createcurrent
hpnicfAclIPAclAdvancedSrcOp
OBJECT-TYPE
Source port operation symbol of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.11PortOpread-createcurrent
hpnicfAclIPAclAdvancedSrcPort1
OBJECT-TYPE
The fourth layer source port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.12Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclAdvancedSrcPort2
OBJECT-TYPE
The fourth layer source port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.13Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclAdvancedDestAddrType
OBJECT-TYPE
The IP addresses type of IP pool.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.14InetAddressTyperead-createcurrent
hpnicfAclIPAclAdvancedDestAddr
OBJECT-TYPE
The value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedDestAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.15InetAddressread-createcurrent
hpnicfAclIPAclAdvancedDestPrefix
OBJECT-TYPE
Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.16InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclAdvancedDestAny
OBJECT-TYPE
The flag of matching any IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.17TruthValueread-createcurrent
hpnicfAclIPAclAdvancedDestWild
OBJECT-TYPE
Destination IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.18IpAddressread-createcurrent
hpnicfAclIPAclAdvancedDestOp
OBJECT-TYPE
Destination port operation symbol of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.19PortOpread-createcurrent
hpnicfAclIPAclAdvancedDestPort1
OBJECT-TYPE
The fourth layer destination port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.20Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclAdvancedDestPort2
OBJECT-TYPE
The fourth layer destination port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.21Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclAdvancedIcmpType
OBJECT-TYPE
The type of ICMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.22Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclAdvancedIcmpCode
OBJECT-TYPE
The code of ICMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.23Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclAdvancedPrecedence
OBJECT-TYPE
The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.24Integer32 (0..7 | 255)read-createcurrent
hpnicfAclIPAclAdvancedTos
OBJECT-TYPE
The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.25Integer32 (0..15 | 255)read-createcurrent
hpnicfAclIPAclAdvancedDscp
OBJECT-TYPE
The value of DSCP of IP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.26DSCPValueread-createcurrent
hpnicfAclIPAclAdvancedTimeRangeName
OBJECT-TYPE
The Time-range of advanced acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.27OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclAdvancedTCPFlag
OBJECT-TYPE
The packet type of TCP protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.28TCPFlagread-createcurrent
hpnicfAclIPAclAdvancedFragmentFlag
OBJECT-TYPE
The flag of matching fragmented packet, and now support two value: 0 or 2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.29FragmentFlagread-createcurrent
hpnicfAclIPAclAdvancedLog
OBJECT-TYPE
Log matched packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.30TruthValueread-createcurrent
hpnicfAclIPAclAdvancedCount
OBJECT-TYPE
The count of matched by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.31Unsigned32read-onlycurrent
hpnicfAclIPAclAdvancedCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.32CounterClearread-writecurrent
hpnicfAclIPAclAdvancedEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.33TruthValueread-onlycurrent
hpnicfAclIPAclAdvancedVpnInstanceName
OBJECT-TYPE
The VPN name that the rule will be applied. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.34OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclAdvancedComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.35OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclIPAclAdvancedReflective
OBJECT-TYPE
The flag of reflective.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.36TruthValueread-createcurrent
hpnicfAclIPAclAdvancedCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.37TruthValueread-createcurrent
hpnicfAclIPAclAdvancedTCPFlagMask
OBJECT-TYPE
The TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.38Bits {tcpack(0), tcpfin(1), tcppsh(2), tcprst(3), tcpsyn(4), tcpurg(5)}read-createcurrent
hpnicfAclIPAclAdvancedTCPFlagValue
OBJECT-TYPE
The TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.39Bits {tcpack(0), tcpfin(1), tcppsh(2), tcprst(3), tcpsyn(4), tcpurg(5)}read-createcurrent
hpnicfAclIPAclAdvancedRouteTypeAny
OBJECT-TYPE
The flag of matching any type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.40TruthValueread-createcurrent
hpnicfAclIPAclAdvancedRouteTypeValue
OBJECT-TYPE
The type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.41Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclAdvancedFlowLabel
OBJECT-TYPE
The value of flow label of IPv6 packet header.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.42Unsigned32 (0..1048575 | 4294967295)read-createcurrent
hpnicfAclIPAclAdvancedSrcSuffix
OBJECT-TYPE
Denotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.43Unsigned32read-createcurrent
hpnicfAclIPAclAdvancedDestSuffix
OBJECT-TYPE
Denotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.44Unsigned32read-createcurrent
hpnicfAclIPAclNamedBscTable
OBJECT-TYPE
A table of basic rule of named ACL. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclIPAclBasicTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4not-accessiblecurrent
hpnicfAclIPAclNamedBscEntry
OBJECT-TYPE
Basic named ACL rule entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1not-accessiblecurrent
hpnicfAclIPAclNamedBscRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.1RowStatusread-createcurrent
hpnicfAclIPAclNamedBscAct
OBJECT-TYPE
The action of basic ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.2RuleActionread-createcurrent
hpnicfAclIPAclNamedBscSrcAddrType
OBJECT-TYPE
The IP addresses type of IP pool.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.3InetAddressTyperead-createcurrent
hpnicfAclIPAclNamedBscSrcAddr
OBJECT-TYPE
The specified source IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedBscSrcAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.4InetAddressread-createcurrent
hpnicfAclIPAclNamedBscSrcPrefix
OBJECT-TYPE
Specify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.5InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclNamedBscSrcAny
OBJECT-TYPE
The flag of matching any source IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.6TruthValueread-createcurrent
hpnicfAclIPAclNamedBscSrcWild
OBJECT-TYPE
Source IPv4 address wildcard mask. Only IPv4 Basic Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.7IpAddressread-createcurrent
hpnicfAclIPAclNamedBscTRangeName
OBJECT-TYPE
The Time-range of basic acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.8OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclNamedBscFragmentFlag
OBJECT-TYPE
The flag of matching fragmented packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.9FragmentFlagread-createcurrent
hpnicfAclIPAclNamedBscLog
OBJECT-TYPE
The packet will be logged when it matches the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.10TruthValueread-createcurrent
hpnicfAclIPAclNamedBscCount
OBJECT-TYPE
The count of matches by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.11Unsigned32read-onlycurrent
hpnicfAclIPAclNamedBscCountClear
OBJECT-TYPE
Reset the statistics counter of the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.12CounterClearread-writecurrent
hpnicfAclIPAclNamedBscEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.13TruthValueread-onlycurrent
hpnicfAclIPAclNamedBscVpnInstName
OBJECT-TYPE
The VPN name, to which the rule will be applied. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.14OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclNamedBscComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.15OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclIPAclNamedBscCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.16TruthValueread-createcurrent
hpnicfAclIPAclNamedBscRouteTypeAny
OBJECT-TYPE
The flag of matching any type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.17TruthValueread-createcurrent
hpnicfAclIPAclNamedBscRouteTypeValue
OBJECT-TYPE
Value of the routing header type of IPv6 packet, in the range of 0 to 255.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.4.1.18Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclNamedAdvTable
OBJECT-TYPE
A table of advanced rule of named ACL. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclIPAclAdvancedTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5not-accessiblecurrent
hpnicfAclIPAclNamedAdvEntry
OBJECT-TYPE
Advanced ACL rule information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1not-accessiblecurrent
hpnicfAclIPAclNamedAdvRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.1RowStatusread-createcurrent
hpnicfAclIPAclNamedAdvAct
OBJECT-TYPE
The action of advanced ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.2RuleActionread-createcurrent
hpnicfAclIPAclNamedAdvProtocol
OBJECT-TYPE
The protocol-type of advanced ACL rule. 0 indicates any IPv4 or IPv6 protocol. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Message Protocol6(58) igmp Internet Group Management Protocol(2) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) ipv6-ah IPv6 Authentication Header(51) ipv6-esp IPv6 Encapsulating Security Payload(50)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.3Integer32 (0..255)read-createcurrent
hpnicfAclIPAclNamedAdvAddrFlag
OBJECT-TYPE
Address flag to select address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.4AddressFlagread-createcurrent
hpnicfAclIPAclNamedAdvSrcAddrType
OBJECT-TYPE
The type of source IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.5InetAddressTyperead-createcurrent
hpnicfAclIPAclNamedAdvSrcAddr
OBJECT-TYPE
The specified source IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedAdvSrcAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.6InetAddressread-createcurrent
hpnicfAclIPAclNamedAdvSrcPrefix
OBJECT-TYPE
Specify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.7InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclNamedAdvSrcAny
OBJECT-TYPE
The flag of matching any IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.8TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvSrcWild
OBJECT-TYPE
Source IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.9IpAddressread-createcurrent
hpnicfAclIPAclNamedAdvSrcOp
OBJECT-TYPE
Source port operation symbol of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.10PortOpread-createcurrent
hpnicfAclIPAclNamedAdvSrcPort1
OBJECT-TYPE
The fourth layer source port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.11Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclNamedAdvSrcPort2
OBJECT-TYPE
The fourth layer source port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.12Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclNamedAdvDstAddrType
OBJECT-TYPE
The type of destination IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.13InetAddressTyperead-createcurrent
hpnicfAclIPAclNamedAdvDstAddr
OBJECT-TYPE
The specified destination IP address. The type of this address is determined by the value of hpnicfAclIPAclNamedAdvDstAddrType.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.14InetAddressread-createcurrent
hpnicfAclIPAclNamedAdvDstPrefix
OBJECT-TYPE
Specify the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.15InetAddressPrefixLengthread-createcurrent
hpnicfAclIPAclNamedAdvDstAny
OBJECT-TYPE
The flag of matching any IP address.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.16TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvDstWild
OBJECT-TYPE
Destination IPv4 address wildcard mask. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.17IpAddressread-createcurrent
hpnicfAclIPAclNamedAdvDstOp
OBJECT-TYPE
Destination port operation symbol of advanced acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.18PortOpread-createcurrent
hpnicfAclIPAclNamedAdvDstPort1
OBJECT-TYPE
The fourth layer destination port1.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.19Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclNamedAdvDstPort2
OBJECT-TYPE
The fourth layer destination port2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.20Integer32 (0..65535)read-createcurrent
hpnicfAclIPAclNamedAdvIcmpType
OBJECT-TYPE
The type of ICMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.21Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclNamedAdvIcmpCode
OBJECT-TYPE
The code of ICMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.22Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclNamedAdvPrecedence
OBJECT-TYPE
The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.23Integer32 (0..7 | 255)read-createcurrent
hpnicfAclIPAclNamedAdvTos
OBJECT-TYPE
The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0)
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.24Integer32 (0..15 | 255)read-createcurrent
hpnicfAclIPAclNamedAdvDscp
OBJECT-TYPE
The value of DSCP of IP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.25DSCPValueread-createcurrent
hpnicfAclIPAclNamedAdvTRangeName
OBJECT-TYPE
The Time-range of advanced ACL rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.26OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclNamedAdvTCPFlag
OBJECT-TYPE
The packet type of TCP protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.27TCPFlagread-createcurrent
hpnicfAclIPAclNamedAdvFragmentFlag
OBJECT-TYPE
The flag of matching fragmented packet, and now support two value: 0 or 2.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.28FragmentFlagread-createcurrent
hpnicfAclIPAclNamedAdvLog
OBJECT-TYPE
Log matched packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.29TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvCount
OBJECT-TYPE
The count of matches by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.30Unsigned32read-onlycurrent
hpnicfAclIPAclNamedAdvCountClear
OBJECT-TYPE
Reset the statistics counter of this rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.31CounterClearread-writecurrent
hpnicfAclIPAclNamedAdvEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.32TruthValueread-onlycurrent
hpnicfAclIPAclNamedAdvVpnInstName
OBJECT-TYPE
The VPN name to which the rule will be applied. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.33OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclIPAclNamedAdvComment
OBJECT-TYPE
The description of ACL rule. Default value is zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.34OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclIPAclNamedAdvReflective
OBJECT-TYPE
The flag of reflective.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.35TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.36TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvTCPFlagMask
OBJECT-TYPE
The TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.37Bits {tcpack(0), tcpfin(1), tcppsh(2), tcprst(3), tcpsyn(4), tcpurg(5)}read-createcurrent
hpnicfAclIPAclNamedAdvTCPFlagValue
OBJECT-TYPE
The TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg |
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.38Bits {tcpack(0), tcpfin(1), tcppsh(2), tcprst(3), tcpsyn(4), tcpurg(5)}read-createcurrent
hpnicfAclIPAclNamedAdvRouteTypeAny
OBJECT-TYPE
The flag of matching any type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.39TruthValueread-createcurrent
hpnicfAclIPAclNamedAdvRouteTypeValue
OBJECT-TYPE
The type of routing header of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.40Integer32 (0..255 | 65535)read-createcurrent
hpnicfAclIPAclNamedAdvFlowLabel
OBJECT-TYPE
The value of flow label of IPv6 packet header.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.41Unsigned32 (0..1048575 | 4294967295)read-createcurrent
hpnicfAclIPAclNamedAdvSrcSuffix
OBJECT-TYPE
Denotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.42Unsigned32read-createcurrent
hpnicfAclIPAclNamedAdvDstSuffix
OBJECT-TYPE
Denotes the length of a generic Internet network address suffix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the least significant bit and all other bits set to 0.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.5.1.43Unsigned32read-createcurrent
hpnicfAclMACAclGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3
hpnicfAclMACTable
OBJECT-TYPE
A table of MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1not-accessiblecurrent
hpnicfAclMACEntry
OBJECT-TYPE
MAC acl group information.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1not-accessiblecurrent
hpnicfAclMACRuleIndex
OBJECT-TYPE
The rule index of MAC-based acl group.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.1Integer32 (0..65534)not-accessiblecurrent
hpnicfAclMACRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.2RowStatusread-createcurrent
hpnicfAclMACAct
OBJECT-TYPE
The action of MAC acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.3RuleActionread-createcurrent
hpnicfAclMACTypeCode
OBJECT-TYPE
The type of protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.4OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclMACTypeMask
OBJECT-TYPE
The mask of protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.5OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclMACSrcMac
OBJECT-TYPE
Source MAC of MAC acl rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.6MacAddressread-createcurrent
hpnicfAclMACSrcMacWild
OBJECT-TYPE
Source MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.7MacAddressread-createcurrent
hpnicfAclMACDestMac
OBJECT-TYPE
Destination MAC of MAC acl rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.8MacAddressread-createcurrent
hpnicfAclMACDestMacWild
OBJECT-TYPE
Destination MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.9MacAddressread-createcurrent
hpnicfAclMACLsapCode
OBJECT-TYPE
The type of LSAP.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.10OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclMACLsapMask
OBJECT-TYPE
The mask of LSAP.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.11OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclMACCos
OBJECT-TYPE
Vlan priority of MAC acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.12Integer32 (0..7 | 255)read-createcurrent
hpnicfAclMACTimeRangeName
OBJECT-TYPE
The Time-range of MAC acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.13OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclMACCount
OBJECT-TYPE
The count of matched frames by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.14Unsigned32read-onlycurrent
hpnicfAclMACCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.15CounterClearread-writecurrent
hpnicfAclMACEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.16TruthValueread-onlycurrent
hpnicfAclMACComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.17OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclMACLog
OBJECT-TYPE
The packet will be logged when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.18TruthValueread-createcurrent
hpnicfAclMACCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.19TruthValueread-createcurrent
hpnicfAclNamedMACTable
OBJECT-TYPE
A table of named MAC ACL rule. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclMACTable. If some objects of this table are not supported by some products, these objects can't be created, changed or applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2not-accessiblecurrent
hpnicfAclNamedMACEntry
OBJECT-TYPE
MAC acl group information.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1not-accessiblecurrent
hpnicfAclNamedMACRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.1RowStatusread-createcurrent
hpnicfAclNamedMACAct
OBJECT-TYPE
The action of MAC ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.2RuleActionread-createcurrent
hpnicfAclNamedMACTypeCode
OBJECT-TYPE
The type of protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.3OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedMACTypeMask
OBJECT-TYPE
The mask of protocol.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.4OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedMACSrcMac
OBJECT-TYPE
Source MAC of MAC ACL rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.5MacAddressread-createcurrent
hpnicfAclNamedMACSrcMacWild
OBJECT-TYPE
Source MAC wildcard of MAC ACL rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.6MacAddressread-createcurrent
hpnicfAclNamedMACDstMac
OBJECT-TYPE
Destination MAC of MAC ACL rule. Default value is '00:00:00:00:00:00'.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.7MacAddressread-createcurrent
hpnicfAclNamedMACDstMacWild
OBJECT-TYPE
Destination MAC wildcard of MAC ACL rule. Default value is '00:00:00:00:00:00'
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.8MacAddressread-createcurrent
hpnicfAclNamedMACLsapCode
OBJECT-TYPE
The type of LSAP.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.9OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedMACLsapMask
OBJECT-TYPE
The mask of LSAP.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.10OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedMACCos
OBJECT-TYPE
Vlan priority of MAC ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.11Integer32 (0..7 | 255)read-createcurrent
hpnicfAclNamedMACTimeRangeName
OBJECT-TYPE
The time-range of MAC ACL rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.12OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedMACCount
OBJECT-TYPE
The count of matched frames by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.13Unsigned32read-onlycurrent
hpnicfAclNamedMACCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.14CounterClearread-writecurrent
hpnicfAclNamedMACEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.15TruthValueread-onlycurrent
hpnicfAclNamedMACComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.16OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclNamedMACLog
OBJECT-TYPE
The packet will be logged when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.17TruthValueread-createcurrent
hpnicfAclNamedMACCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.2.1.18TruthValueread-createcurrent
hpnicfAclEnUserAclGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4
hpnicfAclEnUserTable
OBJECT-TYPE
A table of user acl group information. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3not-accessiblecurrent
hpnicfAclEnUserEntry
OBJECT-TYPE
User defined acl group entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1not-accessiblecurrent
hpnicfAclEnUserRuleIndex
OBJECT-TYPE
The subitem of the user acl.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.1Integer32 (0..65534)not-accessiblecurrent
hpnicfAclEnUserRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.2RowStatusread-createcurrent
hpnicfAclEnUserAct
OBJECT-TYPE
The action of user defined acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.3RuleActionread-createcurrent
hpnicfAclEnUserStartString
OBJECT-TYPE
The rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates the offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: 10,10af,ffff. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.4OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserL2String
OBJECT-TYPE
The rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.5OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserMplsString
OBJECT-TYPE
The rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.6OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserIPv4String
OBJECT-TYPE
The rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.7OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserIPv6String
OBJECT-TYPE
The rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.8OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserL4String
OBJECT-TYPE
The rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.9OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserL5String
OBJECT-TYPE
The rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.10OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclEnUserTimeRangeName
OBJECT-TYPE
The Time-range of user acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.11OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclEnUserCount
OBJECT-TYPE
The count of matched by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.12Unsigned32read-onlycurrent
hpnicfAclEnUserCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.13CounterClearread-writecurrent
hpnicfAclEnUserEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.14TruthValueread-onlycurrent
hpnicfAclEnUserComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.15OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclEnUserLog
OBJECT-TYPE
The packet will be logged when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.16TruthValueread-createcurrent
hpnicfAclEnUserCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.17TruthValueread-createcurrent
hpnicfAclNamedUserTable
OBJECT-TYPE
A table of named user acl rule. The name of ACL group will be used as an index in this table, which differs from the table hpnicfAclEnUserTable. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4not-accessiblecurrent
hpnicfAclNamedUserEntry
OBJECT-TYPE
User defined acl group entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1not-accessiblecurrent
hpnicfAclNamedUserRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.1RowStatusread-createcurrent
hpnicfAclNamedUserAct
OBJECT-TYPE
The action of user defined acl rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.2RuleActionread-createcurrent
hpnicfAclNamedUserStartString
OBJECT-TYPE
The rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates the offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: 10,10af,ffff. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.3OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserL2String
OBJECT-TYPE
The rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.4OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserMplsString
OBJECT-TYPE
The rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.5OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserIPv4String
OBJECT-TYPE
The rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.6OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserIPv6String
OBJECT-TYPE
The rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.7OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserL4String
OBJECT-TYPE
The rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.8OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserL5String
OBJECT-TYPE
The rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.9OCTET STRING (SIZE(0..255))read-createcurrent
hpnicfAclNamedUserTimeRangeName
OBJECT-TYPE
The Time-range of user acl rule. Default value is zero-length.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.10OCTET STRING (SIZE(0..32))read-createcurrent
hpnicfAclNamedUserCount
OBJECT-TYPE
The count of matched by the rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.11Unsigned32read-onlycurrent
hpnicfAclNamedUserCountClear
OBJECT-TYPE
Reset the value of counter.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.12CounterClearread-writecurrent
hpnicfAclNamedUserEnable
OBJECT-TYPE
The rule is active or not. true : active false : inactive
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.13TruthValueread-onlycurrent
hpnicfAclNamedUserComment
OBJECT-TYPE
The description of ACL rule. Default value is Zero-length String.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.14OCTET STRING (SIZE(0..127))read-createcurrent
hpnicfAclNamedUserLog
OBJECT-TYPE
The packet will be logged when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.15TruthValueread-createcurrent
hpnicfAclNamedUserCounting
OBJECT-TYPE
The packet will be counted when it matches the rule. It is disabled by default.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.4.1.16TruthValueread-createcurrent
hpnicfAclResourceGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5
hpnicfAclResourceUsageTable
OBJECT-TYPE
The table shows ACL resource usage information. Support for resource types that are denoted by hpnicfAclResourceType object varies with products. If a type is not supported, the corresponding row for the type will not be instantiated in this table.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1not-accessiblecurrent
hpnicfAclResourceUsageEntry
OBJECT-TYPE
Each row contains a brief description of the resource type, a port range associated with the chip, total, reserved, and configured amount of resource of this type, the percent of resource that has been allocated, and so on.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1not-accessiblecurrent
hpnicfAclResourceChassis
OBJECT-TYPE
The chassis number. On a centralized or distributed device, the value for this node is always zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.1Unsigned32not-accessiblecurrent
hpnicfAclResourceSlot
OBJECT-TYPE
The slot number. On a centralized device, the value for this node is always zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.2Unsigned32not-accessiblecurrent
hpnicfAclResourceChip
OBJECT-TYPE
The chip number. On a single chip device, the value for this node is always zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.3Unsigned32not-accessiblecurrent
hpnicfAclResourceType
OBJECT-TYPE
The resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.4Integer32 (1..255)not-accessiblecurrent
hpnicfAclPortRange
OBJECT-TYPE
The port range associated with the chip. Commas are used to separate multiple port ranges, for example, Ethernet1/2 to Ethernet1/12, Ethernet1/31 to Ethernet1/48.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.5OCTET STRING (SIZE(0..255))read-onlycurrent
hpnicfAclResourceTotal
OBJECT-TYPE
Total TCAM entries of the resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.6Unsigned32read-onlycurrent
hpnicfAclResourceReserved
OBJECT-TYPE
The amount of reserved TCAM entries of the resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.7Unsigned32read-onlycurrent
hpnicfAclResourceConfigured
OBJECT-TYPE
The amount of configured TCAM entries of the resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.8Unsigned32read-onlycurrent
hpnicfAclResourceUsagePercent
OBJECT-TYPE
The percent of TCAM entries that have been used for this resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.9Unsigned32read-onlycurrent
hpnicfAclResourceTypeDescription
OBJECT-TYPE
The description of this resource type.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.10OCTET STRING (SIZE(0..31))read-onlycurrent
hpnicfAclIntervalGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6
hpnicfAclIntervalTable
OBJECT-TYPE
Log interval table.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1not-accessiblecurrent
hpnicfAclIntervalEntry
OBJECT-TYPE
Log interval entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1not-accessiblecurrent
hpnicfAclIntervalType
OBJECT-TYPE
The types of the interval specified for generating packet filtering logs or traps.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.1INTEGER {logging(1), trap(2)}not-accessiblecurrent
hpnicfAclIntervalValue
OBJECT-TYPE
The value of interval. It must be a multiple of 5 and in the range of 5 to 1440.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.2Integer32 (5..1440)read-createcurrent
hpnicfAclIntervalRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.2.6.1.1.3RowStatusread-createcurrent
hpnicfAclPacketFilterObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.3
hpnicfPfilterScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.3.1
hpnicfPfilterDefaultAction
OBJECT-TYPE
The default action of packet filter. By default, the packet filter permits packets that do not match any ACL rule to pass.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.1INTEGER {permit(1), deny(2)}read-writecurrent
hpnicfPfilterProcessingStatus
OBJECT-TYPE
This object shows the status of the system when applying packet filter. It is forbidden to set or read in hpnicfAclPacketFilterObjects MIB module when the value is processing.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.2INTEGER {processing(1), done(2)}read-onlycurrent
hpnicfPfilterApplyTable
OBJECT-TYPE
A table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an entity.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2not-accessiblecurrent
hpnicfPfilterApplyEntry
OBJECT-TYPE
Packet filter application information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1not-accessiblecurrent
hpnicfPfilterApplyObjType
OBJECT-TYPE
The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.1INTEGER {interface(1), vlan(2), global(3)}not-accessiblecurrent
hpnicfPfilterApplyObjIndex
OBJECT-TYPE
The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.2Integer32 (0..2147483647)not-accessiblecurrent
hpnicfPfilterApplyDirection
OBJECT-TYPE
The direction of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.3DirectionTypenot-accessiblecurrent
hpnicfPfilterApplyAclType
OBJECT-TYPE
ACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.4INTEGER {ipv4(1), ipv6(2), default(3), mac(4), user(5)}not-accessiblecurrent
hpnicfPfilterApplyAclIndex
OBJECT-TYPE
The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.5Integer32 (0 | 2000..5999)not-accessiblecurrent
hpnicfPfilterApplyHardCount
OBJECT-TYPE
Hardware count flag. true: enable hardware count false: disable hardware count
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.6TruthValueread-createcurrent
hpnicfPfilterApplySequence
OBJECT-TYPE
The configure sequence of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.7Unsigned32read-onlycurrent
hpnicfPfilterApplyCountClear
OBJECT-TYPE
Clear the value of counters.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.8CounterClearread-writecurrent
hpnicfPfilterApplyRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.9RowStatusread-createcurrent
hpnicfPfilterAclGroupRunInfoTable
OBJECT-TYPE
A table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the statistics entry will be zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3not-accessiblecurrent
hpnicfPfilterAclGroupRunInfoEntry
OBJECT-TYPE
ACL group running information entry for packet filtering.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1not-accessiblecurrent
hpnicfPfilterRunApplyObjType
OBJECT-TYPE
The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.1INTEGER {interface(1), vlan(2), global(3)}not-accessiblecurrent
hpnicfPfilterRunApplyObjIndex
OBJECT-TYPE
The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.2Integer32 (0..2147483647)not-accessiblecurrent
hpnicfPfilterRunApplyDirection
OBJECT-TYPE
The direction of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.3DirectionTypenot-accessiblecurrent
hpnicfPfilterRunApplyAclType
OBJECT-TYPE
ACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.4INTEGER {ipv4(1), ipv6(2), default(3), mac(4), user(5)}not-accessiblecurrent
hpnicfPfilterRunApplyAclIndex
OBJECT-TYPE
The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 MAC default action: 1 IPv4 default action: 2 IPv6 default action: 3
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.5Integer32 (1..3 | 2000..5999)not-accessiblecurrent
hpnicfPfilterAclGroupStatus
OBJECT-TYPE
The status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.6INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilterAclGroupCountStatus
OBJECT-TYPE
The status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.7INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilterAclGroupPermitPkts
OBJECT-TYPE
The number of packets permitted.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.8Counter64read-onlycurrent
hpnicfPfilterAclGroupPermitBytes
OBJECT-TYPE
The number of bytes permitted.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.9Counter64read-onlycurrent
hpnicfPfilterAclGroupDenyPkts
OBJECT-TYPE
The number of packets denied.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.10Counter64read-onlycurrent
hpnicfPfilterAclGroupDenyBytes
OBJECT-TYPE
The number of bytes denied.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.11Counter64read-onlycurrent
hpnicfPfilterAclRuleRunInfoTable
OBJECT-TYPE
A table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the hpnicfPfilterAclRuleMatchPackets and hpnicfPfilterAclRuleMatchBytes will be zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4not-accessiblecurrent
hpnicfPfilterAclRuleRunInfoEntry
OBJECT-TYPE
ACL rule's running information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1not-accessiblecurrent
hpnicfPfilterAclRuleIndex
OBJECT-TYPE
The ACL rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.1Integer32 (0..65534)not-accessiblecurrent
hpnicfPfilterAclRuleStatus
OBJECT-TYPE
The status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.2INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilterAclRuleCountStatus
OBJECT-TYPE
The status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.3INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilterAclRuleMatchPackets
OBJECT-TYPE
The number of packets matched.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.4Counter64read-onlycurrent
hpnicfPfilterAclRuleMatchBytes
OBJECT-TYPE
The number of bytes matched.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.5Counter64read-onlycurrent
hpnicfPfilterStatisticSumTable
OBJECT-TYPE
A table of ACL rule's sum statistics information, accumulated by all entity application on all slots.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5not-accessiblecurrent
hpnicfPfilterStatisticSumEntry
OBJECT-TYPE
ACL rule's sum statistics information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1not-accessiblecurrent
hpnicfPfilterSumDirection
OBJECT-TYPE
The direction of application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.1DirectionTypenot-accessiblecurrent
hpnicfPfilterSumAclType
OBJECT-TYPE
ACL type: IPv4, IPv6, MAC, and user.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.2INTEGER {ipv4(1), ipv6(2), mac(3), user(4)}not-accessiblecurrent
hpnicfPfilterSumAclIndex
OBJECT-TYPE
The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.3Integer32 (2000..5999)not-accessiblecurrent
hpnicfPfilterSumRuleIndex
OBJECT-TYPE
The ACL rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.4Integer32 (0..65534)not-accessiblecurrent
hpnicfPfilterSumRuleMatchPackets
OBJECT-TYPE
The sum number of packets matched the ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.5Counter64read-onlycurrent
hpnicfPfilterSumRuleMatchBytes
OBJECT-TYPE
The sum number of bytes matched the ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.6Counter64read-onlycurrent
hpnicfPfilter2ApplyTable
OBJECT-TYPE
A table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an entity.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6not-accessiblecurrent
hpnicfPfilter2ApplyEntry
OBJECT-TYPE
Packet filter application information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1not-accessiblecurrent
hpnicfPfilter2ApplyObjType
OBJECT-TYPE
The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.1INTEGER {interface(1), vlan(2), global(3)}accessible-for-notifycurrent
hpnicfPfilter2ApplyObjIndex
OBJECT-TYPE
The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.2Integer32 (0..2147483647)accessible-for-notifycurrent
hpnicfPfilter2ApplyDirection
OBJECT-TYPE
The direction of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.3DirectionTypeaccessible-for-notifycurrent
hpnicfPfilter2ApplyAclType
OBJECT-TYPE
ACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.4INTEGER {ipv4(1), ipv6(2), default(3), mac(4), user(5)}accessible-for-notifycurrent
hpnicfPfilter2ApplyAclIndex
OBJECT-TYPE
The index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index or a default action. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.5OCTET STRING (SIZE(1..63))accessible-for-notifycurrent
hpnicfPfilter2ApplyHardCount
OBJECT-TYPE
Hardware count flag. true: enable hardware count false: disable hardware count
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.6TruthValueread-createcurrent
hpnicfPfilter2ApplySequence
OBJECT-TYPE
The configure sequence of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.7Unsigned32read-onlycurrent
hpnicfPfilter2ApplyCountClear
OBJECT-TYPE
Clear the value of counters.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.8CounterClearread-writecurrent
hpnicfPfilter2ApplyRowStatus
OBJECT-TYPE
RowStatus.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.6.1.9RowStatusread-createcurrent
hpnicfPfilter2AclGroupRunInfoTable
OBJECT-TYPE
A table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the statistics entry will be zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7not-accessiblecurrent
hpnicfPfilter2AclGroupRunInfoEntry
OBJECT-TYPE
ACL group running information entry for packet filtering.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1not-accessiblecurrent
hpnicfPfilter2RunApplyObjType
OBJECT-TYPE
The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.1INTEGER {interface(1), vlan(2), global(3)}not-accessiblecurrent
hpnicfPfilter2RunApplyObjIndex
OBJECT-TYPE
The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.2Integer32 (0..2147483647)not-accessiblecurrent
hpnicfPfilter2RunApplyDirection
OBJECT-TYPE
The direction of packet filter application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.3DirectionTypenot-accessiblecurrent
hpnicfPfilter2RunApplyAclType
OBJECT-TYPE
ACL Type: IPv4, IPv6, default action, MAC, and user. Take default action as a special ACL group.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.4INTEGER {ipv4(1), ipv6(2), default(3), mac(4), user(5)}not-accessiblecurrent
hpnicfPfilter2RunApplyAclIndex
OBJECT-TYPE
The index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index or a default action. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 MAC default action: 1 IPv4 default action: 2 IPv6 default action: 3
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.5OCTET STRING (SIZE(1..63))not-accessiblecurrent
hpnicfPfilter2AclGroupStatus
OBJECT-TYPE
The status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.6INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilter2AclGroupCountStatus
OBJECT-TYPE
The status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.7INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilter2AclGroupPermitPkts
OBJECT-TYPE
The number of packets permitted.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.8Counter64read-onlycurrent
hpnicfPfilter2AclGroupPermitBytes
OBJECT-TYPE
The number of bytes permitted.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.9Counter64read-onlycurrent
hpnicfPfilter2AclGroupDenyPkts
OBJECT-TYPE
The number of packets denied.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.10Counter64read-onlycurrent
hpnicfPfilter2AclGroupDenyBytes
OBJECT-TYPE
The number of bytes denied.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.7.1.11Counter64read-onlycurrent
hpnicfPfilter2AclRuleRunInfoTable
OBJECT-TYPE
A table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the hpnicfPfilter2AclRuleMatchPackets and hpnicfPfilter2AclRuleMatchBytes will be zero.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8not-accessiblecurrent
hpnicfPfilter2AclRuleRunInfoEntry
OBJECT-TYPE
ACL rule's running information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1not-accessiblecurrent
hpnicfPfilter2AclRuleIndex
OBJECT-TYPE
The ACL rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.1Integer32 (0..65534)accessible-for-notifycurrent
hpnicfPfilter2AclRuleStatus
OBJECT-TYPE
The status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.2INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilter2AclRuleCountStatus
OBJECT-TYPE
The status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.3INTEGER {success(1), failed(2), partialSuccess(3)}read-onlycurrent
hpnicfPfilter2AclRuleMatchPackets
OBJECT-TYPE
The number of packets matched.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.4Counter64read-onlycurrent
hpnicfPfilter2AclRuleMatchBytes
OBJECT-TYPE
The number of bytes matched.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.8.1.5Counter64read-onlycurrent
hpnicfPfilter2StatisticSumTable
OBJECT-TYPE
A table of ACL rule's sum statistics information, accumulated by all entity application on all slots.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9not-accessiblecurrent
hpnicfPfilter2StatisticSumEntry
OBJECT-TYPE
ACL rule's sum statistics information entry.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1not-accessiblecurrent
hpnicfPfilter2SumDirection
OBJECT-TYPE
The direction of application.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.1DirectionTypenot-accessiblecurrent
hpnicfPfilter2SumAclType
OBJECT-TYPE
ACL type: IPv4, IPv6, MAC, and user.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.2INTEGER {ipv4(1), ipv6(2), mac(3), user(4)}not-accessiblecurrent
hpnicfPfilter2SumAclIndex
OBJECT-TYPE
The index of ACL group used by packet-filter. If the specified string comprises only digits, it is converted into a numerical sequence in decimal notation, and regarded as an ACL group index. If the string is a character string beginning with an English letter, it is regarded as an ACL group name. Group index range and default action: Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.3OCTET STRING (SIZE(1..63))not-accessiblecurrent
hpnicfPfilter2SumRuleIndex
OBJECT-TYPE
The ACL rule index.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.4Integer32 (0..65534)not-accessiblecurrent
hpnicfPfilter2SumRuleMatchPackets
OBJECT-TYPE
The sum number of packets matched the ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.5Counter64read-onlycurrent
hpnicfPfilter2SumRuleMatchBytes
OBJECT-TYPE
The sum number of bytes matched the ACL rule.
1.3.6.1.4.1.11.2.14.11.15.2.8.3.9.1.6Counter64read-onlycurrent
hpnicfAclPacketfilterTrapObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.4
hpnicfPfilterInterface
OBJECT-TYPE
The interface which policy apply.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.1OCTET STRINGaccessible-for-notifycurrent
hpnicfPfilterDirection
OBJECT-TYPE
Inbound or outbound.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.2OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfPfilterACLNumber
OBJECT-TYPE
ACL number.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.3Integer32accessible-for-notifycurrent
hpnicfPfilterAction
OBJECT-TYPE
Permit or deny.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.4OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfMACfilterSourceMac
OBJECT-TYPE
Source MAC address.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.5OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfMACfilterDestinationMac
OBJECT-TYPE
Destination MAC address.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.6OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfPfilterPacketNumber
OBJECT-TYPE
The number of packets permitted or denied by ACL.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.7Integer32accessible-for-notifycurrent
hpnicfPfilterReceiveInterface
OBJECT-TYPE
The interface where packet come from.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.8OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfAclPacketIfName
OBJECT-TYPE
The name of the interface on which the packet is matched.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.9OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfAclPacketDirection
OBJECT-TYPE
The direction the packet is going.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.10DirectionTypeaccessible-for-notifycurrent
hpnicfAclPacketBAGG
OBJECT-TYPE
The bridge-aggregation-interface ID the interface belongs to.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.11Integer32 (0..2048)accessible-for-notifycurrent
hpnicfAclPacketVlanID
OBJECT-TYPE
The vlan the interface belongs to.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.12Integer32 (1..4094)accessible-for-notifycurrent
hpnicfAclPacketSrcIP
OBJECT-TYPE
Source IP address of IPv4/IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.13OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfAclPacketDstIP
OBJECT-TYPE
Destination IP address of IPv4/IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.14OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hpnicfAclPacketProtocol
OBJECT-TYPE
The protocol of IPv4/IPv6 packet. icmp(1), tcp(6), udp(17), igmp(2), gre(47), ospf(89), ipinip(4), icmp6(58), ipv6_ah(51), ipv6_esp(50)
1.3.6.1.4.1.11.2.14.11.15.2.8.4.15Integer32 (0..255)accessible-for-notifycurrent
hpnicfAclPacketDscp
OBJECT-TYPE
DSCP of IPv4/IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.16DSCPValueaccessible-for-notifycurrent
hpnicfAclPacketFlowLabel
OBJECT-TYPE
Flow label value of IPv6 packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.17Unsigned32 (0..1048575 | 4294967295)accessible-for-notifycurrent
hpnicfAclPacketIcmpIgmpType
OBJECT-TYPE
The type of ICMP or IGMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.18Integer32 (0..255 | 65535)accessible-for-notifycurrent
hpnicfAclPacketIcmpIgmpCode
OBJECT-TYPE
The code of ICMP or IGMP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.19Integer32 (0..255 | 65535)accessible-for-notifycurrent
hpnicfAclPacketTcpFlags
OBJECT-TYPE
The flags of TCP packet. tcpack(1), tcpfin(2), tcppsh(3), tcprst(4), tcpsyn(5), tcpurg(6), invalid(255)
1.3.6.1.4.1.11.2.14.11.15.2.8.4.20INTEGER {tcpack(1), tcpfin(2), tcppsh(3), tcprst(4), tcpsyn(5), tcpurg(6), invalid(255)}accessible-for-notifycurrent
hpnicfAclPacketSrcPort
OBJECT-TYPE
Source port of TCP or UDP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.21Integer32 (0..65535)accessible-for-notifycurrent
hpnicfAclPacketDstPort
OBJECT-TYPE
Destination port of TCP or UDP packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.22Integer32 (0..65535)accessible-for-notifycurrent
hpnicfAclPacketSrcMacAddr
OBJECT-TYPE
Source MAC address of Ethernet packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.23MacAddressaccessible-for-notifycurrent
hpnicfAclPacketDstMacAddr
OBJECT-TYPE
Destination MAC address of Ethernet packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.24MacAddressaccessible-for-notifycurrent
hpnicfAclPacketMacTypeLen
OBJECT-TYPE
The Ethertype or 802.3 length of Ethernet packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.25Integer32 (0..65535)accessible-for-notifycurrent
hpnicfAclPacketVlanPCP
OBJECT-TYPE
802.1p priority code point of Ethernet packet.
1.3.6.1.4.1.11.2.14.11.15.2.8.4.26Integer32 (0..7 | 255)accessible-for-notifycurrent
hpnicfAclPacketfilterTrap
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.5
hpnicfPfilterTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0

Notifications

NameOIDStatus
hpnicfMACfilterTrap
NOTIFICATION-TYPE
This notification is generated when a packet was processed by MAC address filter, but not every packet will generate one notification, the same notification only generate once in 30 seconds.
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.1current
hpnicfAclRuleMatchCount
NOTIFICATION-TYPE
This notification is generated periodically due to a timer. The interval of the timer is configured in hpnicfAclIntervalTable. The notification details the entries about the packet-filter object, the matched ACL rule and the number of matching packets.
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.2current
hpnicfAclFirstIPv4PktCaptured
NOTIFICATION-TYPE
This notification is generated immediately when the first packet of the matched IPv4 flow is captured. Other packets of the matched flow won't be captured.
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.3current
hpnicfAclFirstIPv6PktCaptured
NOTIFICATION-TYPE
This notification is generated immediately when the first packet of the matched IPv6 flow is captured. Other packets of the matched flow won't be captured.
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.4current
hpnicfAclFirstEthernetPktCaptured
NOTIFICATION-TYPE
This notification is generated immediately when the first packet of the matched Ethernet flow is captured. Other packets of the matched flow won't be captured.
1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.5current