MIBs Depot

HPICF-IPSLA-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.5.1.127
Last updated
2016-11-10 00:00
Organization
HP Networking.
Revisions
2016-11-10 00:00, 2016-10-20 00:00, 2016-10-05 00:00, 2016-09-29 00:00, 2016-09-15 00:00, 2016-07-25 00:00, 2016-07-07 00:00, 2016-06-20 00:00, 2016-03-14 00:00, 2016-02-16 00:00, 2015-06-01 00:00
Namespace
hp
Source file
HPICF-IPSLA-MIB
Digest
sha256:2ff71b0347ca1f8e0f82b53ee59d8a865ed48ff25fd262fe6daa00e1e0faec3b

Description

This MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA).

Contact

Hewlett Packard Enterprise Development LP. 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
HP-ICF-OIDhpSwitch
IF-MIBInterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-ICF-OID
HPICF-IPSLA-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpicfIpSlaNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.127.0
hpicfIpSlaObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.127.1
hpicfIpSlaTable
OBJECT-TYPE
This table specifies IP SLA test parameters as SLA entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1not-accessiblecurrent
hpicfIpSlaEntry
OBJECT-TYPE
An entry on this table specifies the destination IP address/ Hostname, Source address, Source Interface ID & Row status corresponding to each SLA test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1not-accessiblecurrent
hpicfIpSlaID
OBJECT-TYPE
This is an identifier for the IP SLA.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.1Integer32 (1..255)not-accessiblecurrent
hpicfIpSlaType
OBJECT-TYPE
SLA Probe Type. IcmpEcho is similar to ping protocol and the destination should be enabled with responder functionality for udpEcho, udpJitter, udpJitterVoIP and tcpConnect. For DHCP and DNS, destination device should be enabled with DHCP and DNS servers, respectively.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.2INTEGER {icmpEcho(1), udpEcho(2), udpJitter(3), udpJitterVoIP(4), tcpConnect(5), dhcp(6), dns(7)}read-createcurrent
hpicfIpSlaAdminState
OBJECT-TYPE
Enable or disable the IP Service Level Agreement (SLA) probe.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.3INTEGER {enable(1), disable(2)}read-createcurrent
hpicfIpSlaSourceAddressType
OBJECT-TYPE
SLA source address type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.4InetAddressTyperead-createcurrent
hpicfIpSlaSourceAddress
OBJECT-TYPE
SLA source address.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.5InetAddressread-createcurrent
hpicfIpSlaL4SourcePort
OBJECT-TYPE
SLA source port to be used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect. The allowed range is from 1024 to 65535.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.6InetPortNumberread-createcurrent
hpicfIpSlaSourceInterface
OBJECT-TYPE
SLA source interface.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.7InterfaceIndexOrZeroread-createcurrent
hpicfIpSlaDestAddressType
OBJECT-TYPE
SLA destination address type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.8InetAddressTyperead-createcurrent
hpicfIpSlaDestAddress
OBJECT-TYPE
SLA destination address.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.9InetAddressread-createcurrent
hpicfIpSlaL4DestPort
OBJECT-TYPE
Port on target device which responds back to the probe. This is used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect SLA types. The allowed range is from 1024 to 65535.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.10InetPortNumberread-createcurrent
hpicfIpSlaRowStatus
OBJECT-TYPE
SLA row status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.11RowStatusread-createcurrent
hpicfIpSlaAttrTable
OBJECT-TYPE
This table specifies IP SLA test parameters as SLA entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2not-accessiblecurrent
hpicfIpSlaAttrEntry
OBJECT-TYPE
An entry on this table specifies the attributes of SLA test such as scheduling parameters, TOS, payload size, history bucket size and inter packet interval, corresponding to each SLA test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1not-accessiblecurrent
hpicfIpSlaSchedStartTime
OBJECT-TYPE
Timestamp to denote when to start this SLA probe.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.1DateAndTimeread-createcurrent
hpicfIpSlaSchedEndTime
OBJECT-TYPE
Timestamp to denote when to end this SLA probe.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.2DateAndTimeread-createcurrent
hpicfIpSlaSchedFreq
OBJECT-TYPE
Frequency in seconds. This value is used to send probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.3Unsigned32read-createcurrent
hpicfIpSlaSchedRepeat
OBJECT-TYPE
Number of times this test will be repeated.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.4Unsigned32read-createcurrent
hpicfIpSlaAttrTOS
OBJECT-TYPE
Type of service value to be set for the probe packet.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.5Unsigned32 (0..255)read-createcurrent
hpicfIpSlaAttrHistorySize
OBJECT-TYPE
Number of history records to be maintained for SLA test. Size can vary from 1 to 50.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.6Unsigned32read-createcurrent
hpicfIpSlaAttrPayloadSize
OBJECT-TYPE
Size of the packet payload to be sent out for each probe. It can be set from 0 to 1440 for udpEcho, icmpEcho and from 68 to 8100 for udpJitter.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.7Unsigned32read-createcurrent
hpicfIpSlaAttrNumPkts
OBJECT-TYPE
Number of packets to be sent out for a single probe for jitter SLA type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.8Unsigned32read-createcurrent
hpicfIpSlaAttrPktInterval
OBJECT-TYPE
Inter packet interval in milli seconds. Which is to be used for packets that are sent out for a single probe for jitter SLA type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.9Unsigned32read-createcurrent
hpicfIpSlaAttrRowStatus
OBJECT-TYPE
SLA attribute row status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.10RowStatusread-createcurrent
hpicfIpSlaAttrCodecType
OBJECT-TYPE
Codec-type for the VoIP SLA test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.11INTEGER {g711a(1), g711u(2), g729a(3)}read-createcurrent
hpicfIpSlaAttrAdvntgFactr
OBJECT-TYPE
Advantage factor to calculate the MOS and ICPIF values for VoIP SLA type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.12Unsigned32 (0..20)read-createcurrent
hpicfIpSlaThrTable
OBJECT-TYPE
This table specifies IP SLA threshold-action parameters as entries. When one of the monitored parameters of an SLA test goes beyond the configured thresholds, notifications are generated either as traps or syslog messages.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3not-accessiblecurrent
hpicfIpSlaThrEntry
OBJECT-TYPE
An entry on this table specifies the Metric type, upper and lower limit of thresholds, threshold type and action to be taken.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1not-accessiblecurrent
hpicfIpSlaThrMetricType
OBJECT-TYPE
SLA metric type to be monitored. The rtt type is the round trip time of the probe packet. The jitter type is the inter-packet delay variance. The srcTodstTime type is the one-way trip time from source to destination. The dstTosrcTtime type is the one-way trip time from destination to source. The Mean Opinion Scores (MOS) type is derived only for udpJitterVoIP SLA. The Calculated Planning Impairment Factor (ICPIF) type is derived only for udpJitterVoIP SLA. ThepacketLoss type is to monitor loss of communication. The testCompletion type is for notifying about the completion of probe test. The sdJitterPos type is the source-to-destination positive jitter and the dsJitterPos type is the destination-to-source positivejitter.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.1INTEGER {rtt(1), jitter(2), srcTodstTime(3), dstTosrcTime(4), mos(5), icpif(6), packetLoss(7), testCompletion(8), sdJitterPos(9), dsJitterPos(10)}not-accessiblecurrent
hpicfIpSlaThrUpper
OBJECT-TYPE
Acceptable upper-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.2Integer32read-createcurrent
hpicfIpSlaThrLower
OBJECT-TYPE
Acceptable lower-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.3Integer32read-createcurrent
hpicfIpSlaThrType
OBJECT-TYPE
Configure threshold type to trigger action. When a trap/log has to be generated each time the threshold is breached, immediate threshold type can be used. The Consecutive threshold type generates traps/logs when the threshold is violated a certain number of times This value is not applicable when hpicfIpSlaThrMetricType is set to testCompletion. The aggregated threshold type is used to generate traps/logs for aggregated probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.4INTEGER {immediate(1), consecutive(2), aggregated(3)}read-createcurrent
hpicfIpSlaThrCount
OBJECT-TYPE
The value for the number of consecutive times the upper or lower limit of the threshold is violated. For example, this can be configured to trigger a trap/log when the RTT is more than the upper limit, x number of times consecutively. This value is applicable only if hpicfIpSlaThrType is set to consecutive.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.5Unsigned32read-createcurrent
hpicfIpSlaThrAction
OBJECT-TYPE
The number of probe packets used to calculate Round Trip Time for jitter test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.6INTEGER {none(0), trap(1), log(2), trapAndLog(3)}read-createcurrent
hpicfIpSlaThrRowStatus
OBJECT-TYPE
Threshold table row status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.7RowStatusread-createcurrent
hpicfIpSlaRespTable
OBJECT-TYPE
This table specifies IP SLA responder parameters as entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4not-accessiblecurrent
hpicfIpSlaRespEntry
OBJECT-TYPE
An entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1not-accessiblecurrent
hpicfIpSlaRespType
OBJECT-TYPE
The SLA responder type. The udpEcho and tcpConnect objects are for UDP and TCP packets, respectively. The udpJitter and udpJitterVoIP values calculate one-way delay, therefore a timestamp has to be embedded while replying back. This is one of the indexes for the hpicfIpSlaRespTable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.1INTEGER {udpEcho(1), udpJitter(2), udpJitterVoIP(3), tcpConnect(4)}not-accessiblecurrent
hpicfIpSlaRespAddressType
OBJECT-TYPE
SLA responder IP address type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.2InetAddressTyperead-createcurrent
hpicfIpSlaRespAddress
OBJECT-TYPE
The local IP address to which the responder is bound. This is one of the indexes for the hpicfIpSlaRespTable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.3InetAddressnot-accessiblecurrent
hpicfIpSlaRespL4Port
OBJECT-TYPE
L4 port number on hpicfIpSlaRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for the hpicfIpSlaRespTable. The allowed range is from 1024 to 65535.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.4InetPortNumbernot-accessiblecurrent
hpicfIpSlaRespRowStatus
OBJECT-TYPE
SLA responder row status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.5RowStatusread-createcurrent
hpicfIpSlaMsgTable
OBJECT-TYPE
This table specifies the IP SLA result parameters as entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5not-accessiblecurrent
hpicfIpSlaMsgEntry
OBJECT-TYPE
An entry on this table specifies the probe received time, probe error counters and threshold hit counter.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1not-accessiblecurrent
hpicfIpSlaMsgLastProbeRcvd
OBJECT-TYPE
Last probe received time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.1Unsigned32read-onlycurrent
hpicfIpSlaMsgLastClrRec
OBJECT-TYPE
Last clear record done time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.2Unsigned32read-onlycurrent
hpicfIpSlaMsgSuccProbe
OBJECT-TYPE
Number of successful probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.3Unsigned32read-onlycurrent
hpicfIpSlaMsgIntErr
OBJECT-TYPE
Internal error count.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.4Unsigned32read-onlycurrent
hpicfIpSlaMsgLocIntfDown
OBJECT-TYPE
Number of probes failed due to local interface failure.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.5Unsigned32read-onlycurrent
hpicfIpSlaMsgResTimeout
OBJECT-TYPE
Resolution timed out.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.6Unsigned32read-onlycurrent
hpicfIpSlaMsgDNSFormatErr
OBJECT-TYPE
Number of DNS format errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.7Unsigned32read-onlycurrent
hpicfIpSlaMsgServerFaild
OBJECT-TYPE
Number of server failed errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.8Unsigned32read-onlycurrent
hpicfIpSlaMsgDomainNotExist
OBJECT-TYPE
Number of domain does not exist errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.9Unsigned32read-onlycurrent
hpicfIpSlaMsgFunctnNotImpl
OBJECT-TYPE
Number of function not implemented errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.10Unsigned32read-onlycurrent
hpicfIpSlaMsgServerRefusd
OBJECT-TYPE
Number of server refused errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.11Unsigned32read-onlycurrent
hpicfIpSlaMsgNameNotExist
OBJECT-TYPE
Number of name does not exist errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.12Unsigned32read-onlycurrent
hpicfIpSlaMsgRRsetNotExist
OBJECT-TYPE
Number of RRset that should not exist errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.13Unsigned32read-onlycurrent
hpicfIpSlaMsgServerNotInZone
OBJECT-TYPE
Number of server not in the zone errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.14Unsigned32read-onlycurrent
hpicfIpSlaMsgNameNotInZone
OBJECT-TYPE
Number of name not in the zone errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.15Unsigned32read-onlycurrent
hpicfIpSlaMsgDHCPFaildResln
OBJECT-TYPE
Number of DHCP failed resolutions.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.16Unsigned32read-onlycurrent
hpicfIpSlaMsgOffrNotRecvd
OBJECT-TYPE
Number of DHCP offer not received errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.17Unsigned32read-onlycurrent
hpicfIpSlaMsgNACKRecvd
OBJECT-TYPE
Number of NACKs received.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.18Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitRTT
OBJECT-TYPE
Number of round-trip time hits to threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.19Unsigned32read-onlycurrent
hpicfIpSlaMsgStatus
OBJECT-TYPE
IP SLA current running status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.20Unsigned32read-onlycurrent
hpicfIpSlaMsgNxtSched
OBJECT-TYPE
Next scheduled time of IP SLA probe.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.21Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitPostvSDAvg
OBJECT-TYPE
The average positive jitter value of packets moving from source to destination that cross the threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.22Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitPostvDSAvg
OBJECT-TYPE
The average positive jitter value of packets moving from destination to source that cross the threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.23Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitOneWayDSAvg
OBJECT-TYPE
The average time taken by packets moving from destination to source that cross the threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.24Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitOneWaySDAvg
OBJECT-TYPE
The average time taken by packets moving from source to destination that cross the threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.25Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitAvgICPIF
OBJECT-TYPE
Average value of the ICPIF of packets that cross the threshold.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.26Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitAvgMOS
OBJECT-TYPE
Average value of the MOS of packets that cross the threshold. The Value of this object is 100 times of the actual value.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.27Unsigned32read-onlycurrent
hpicfIpSlaMsgNameServUnreach
OBJECT-TYPE
Number of errors due to name server being unreachable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.28Unsigned32read-onlycurrent
hpicfIpSlaMsgDHCPReleaseErr
OBJECT-TYPE
Number of DHCP release errors.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.29Unsigned32read-onlycurrent
hpicfIpSlaMsgThrHitPktLoss
OBJECT-TYPE
Number of packet loss for each probe.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.30Unsigned32read-onlycurrent
hpicfIpSlaMsgDstUnreach
OBJECT-TYPE
Number of probes failed due to destination not being reachable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.31Unsigned32read-onlycurrent
hpicfIpSlaMsgProbeSkpd
OBJECT-TYPE
Number of probes skipped due to DNS resolution delay.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.32Unsigned32read-onlycurrent
hpicfIpSlaMsgDNSResolnFailed
OBJECT-TYPE
Number of times DNS resolution failed.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.33Unsigned32read-onlycurrent
hpicfIpSlaMsgNoRoutetoTgt
OBJECT-TYPE
Number of errors due to no route to target.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.34Unsigned32read-onlycurrent
hpicfIpSlaMsgUnbleToConctHost
OBJECT-TYPE
Number of errors due to no host connectivity.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.35Unsigned32read-onlycurrent
hpicfIpSlaMsgSuccConnection
OBJECT-TYPE
Number of successful connections.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.36Unsigned32read-onlycurrent
hpicfIpSlaMsgPossTrailDropped
OBJECT-TYPE
Number of probes dropped due to resource unavailability.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.37Unsigned32read-onlycurrent
hpicfIpSlaMsgNoRespFrmTgt
OBJECT-TYPE
Number of errors due to no response from target.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.38Unsigned32read-onlycurrent
hpicfIpSlaMsgProbeRespRecvd
OBJECT-TYPE
Number of probes received.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.39Unsigned32read-onlycurrent
hpicfIpSlaHistTable
OBJECT-TYPE
This table specifies the history of IP SLA result.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6not-accessiblecurrent
hpicfIpSlaHistEntry
OBJECT-TYPE
An entry on this table specifies the minimum, maximum and the average time taken from source to destination and vice versa.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1not-accessiblecurrent
hpicfIpSlaHistMinRTT
OBJECT-TYPE
The minimum probe round-trip time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.1Unsigned32read-onlycurrent
hpicfIpSlaHistMaxRTT
OBJECT-TYPE
The maximum probe round-trip time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.2Unsigned32read-onlycurrent
hpicfIpSlaHistAvgRTT
OBJECT-TYPE
The average probe round-trip time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.3Unsigned32read-onlycurrent
hpicfIpSlaHistTotalRTT
OBJECT-TYPE
The total probe round-trip time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.4Unsigned32read-onlycurrent
hpicfIpSlaHistRTT2
OBJECT-TYPE
The sum of the squares of round-trip time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.5Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfRTT
OBJECT-TYPE
The number of RTTs that are successfully measured.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.6Unsigned32read-onlycurrent
hpicfIpSlaHistProbID
OBJECT-TYPE
Probe ID number.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.7Unsigned32read-onlycurrent
hpicfIpSlaHistLastSuccProbTime
OBJECT-TYPE
Last success probe time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.8Unsigned32read-onlycurrent
hpicfIpSlaHistPacketLoss
OBJECT-TYPE
The packet loss value during the jitter test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.9Unsigned32read-onlycurrent
hpicfIpSlaHistSentPktNum
OBJECT-TYPE
Number of packets sent to responder.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.10Unsigned32read-onlycurrent
hpicfIpSlaHistRecvdPktNum
OBJECT-TYPE
Number of packets received from responder.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.11Unsigned32read-onlycurrent
hpicfIpSlaHistMinStoDPostv
OBJECT-TYPE
The minimal positive jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.12Unsigned32read-onlycurrent
hpicfIpSlaHistMaxStoDPostv
OBJECT-TYPE
The maximum positive jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.13Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfPosSD
OBJECT-TYPE
Number of times the source to destination jitter has a positive value.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.14Unsigned32read-onlycurrent
hpicfIpSlaHistSumOfPosSD
OBJECT-TYPE
The sum of positive jitter values recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.15Unsigned32read-onlycurrent
hpicfIpSlaHistAvgStoDPostv
OBJECT-TYPE
The average positive jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.16Unsigned32read-onlycurrent
hpicfIpSlaHistSum2PositivesSD
OBJECT-TYPE
The sum of square of positive jitter values recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.17Unsigned32read-onlycurrent
hpicfIpSlaHistMinDtoSPostv
OBJECT-TYPE
The minimal positive jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.18Unsigned32read-onlycurrent
hpicfIpSlaHistMaxDtoSPostv
OBJECT-TYPE
The maximum positive jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.19Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfPosDS
OBJECT-TYPE
The positive jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.20Unsigned32read-onlycurrent
hpicfIpSlaHistSumOfPosDS
OBJECT-TYPE
The sum of positive jitter values recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.21Unsigned32read-onlycurrent
hpicfIpSlaHistAvgDtoSPostv
OBJECT-TYPE
The average positive jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.22Unsigned32read-onlycurrent
hpicfIpSlaHistSum2PositivesDS
OBJECT-TYPE
The sum of square of positive jitter values recorded from destination-to-source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.23Unsigned32read-onlycurrent
hpicfIpSlaHistMinStoDNegtv
OBJECT-TYPE
The minimal negative jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.24Unsigned32read-onlycurrent
hpicfIpSlaHistMaxStoDNegtv
OBJECT-TYPE
The maximum negative jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.25Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfNegSD
OBJECT-TYPE
The number of negative jitter values recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.26Unsigned32read-onlycurrent
hpicfIpSlaHistSumOfNegSD
OBJECT-TYPE
The sum of negative jitter values recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.27Unsigned32read-onlycurrent
hpicfIpSlaHistAvgStoDNegtv
OBJECT-TYPE
The average negative jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.28Unsigned32read-onlycurrent
hpicfIpSlaHistSum2NegativesSD
OBJECT-TYPE
The sum of square of negative jitter values recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.29Unsigned32read-onlycurrent
hpicfIpSlaHistMinDtoSNegtv
OBJECT-TYPE
The minimal negative jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.30Unsigned32read-onlycurrent
hpicfIpSlaHistMaxDtoSNegtv
OBJECT-TYPE
The maximum negative jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.31Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfNegDS
OBJECT-TYPE
The number of negative jitter values recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.32Unsigned32read-onlycurrent
hpicfIpSlaHistSumOfNegDS
OBJECT-TYPE
The negative jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.33Unsigned32read-onlycurrent
hpicfIpSlaHistAvgDtoSNegtv
OBJECT-TYPE
The average negative jitter value recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.34Unsigned32read-onlycurrent
hpicfIpSlaHistSum2NegativesDS
OBJECT-TYPE
The negative jitter value recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.35Unsigned32read-onlycurrent
hpicfIpSlaHistMinStoDDelay
OBJECT-TYPE
The minimum delay recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.36Unsigned32read-onlycurrent
hpicfIpSlaHistMaxStoDDelay
OBJECT-TYPE
The maximum delay recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.37Unsigned32read-onlycurrent
hpicfIpSlaHistSumStoDDelay
OBJECT-TYPE
The sum of all delays recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.38Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfDelaySD
OBJECT-TYPE
The number of delays from source to destination that are successfully measured.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.39Unsigned32read-onlycurrent
hpicfIpSlaHistSum2DelaySD
OBJECT-TYPE
The sum of squares of all delays recorded from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.40Unsigned32read-onlycurrent
hpicfIpSlaHistMinDtoSDelay
OBJECT-TYPE
The minimum delay recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.41Unsigned32read-onlycurrent
hpicfIpSlaHistMaxDtoSDelay
OBJECT-TYPE
The maximum delay recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.42Unsigned32read-onlycurrent
hpicfIpSlaHistNumOfDelayDS
OBJECT-TYPE
The number of delays from destination to source that are successfully measured.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.43Unsigned32read-onlycurrent
hpicfIpSlaHistSumDtoSDelay
OBJECT-TYPE
The sum of all delays recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.44Unsigned32read-onlycurrent
hpicfIpSlaHistSum2DelayDS
OBJECT-TYPE
The sum of squares of all delays recorded from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.45Unsigned32read-onlycurrent
hpicfIpSlaHistICPIF
OBJECT-TYPE
The Calculated Planning Impairment Factor (ICPIF) value for the type-specified test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.46Unsigned32read-onlycurrent
hpicfIpSlaHistMOS
OBJECT-TYPE
The Mean Opinion Score (MOS) value for the type-specified test. The Value of this object is 100 times of the actual value.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.47Unsigned32read-onlycurrent
hpicfIpSlaHistAvgStoDDelay
OBJECT-TYPE
The average one-way time from source to destination.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.48Unsigned32read-onlycurrent
hpicfIpSlaHistAvgDtoSDelay
OBJECT-TYPE
The average one-way time from destination to source.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.49Unsigned32read-onlycurrent
hpicfIpSlaHistSummTable
OBJECT-TYPE
This table specifies the history summary of IP SLA result.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7not-accessiblecurrent
hpicfIpSlaHistSummEntry
OBJECT-TYPE
An entry on this table specifies the minimum, maximum and the average time taken from source to destination and vice versa.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1not-accessiblecurrent
hpicfIpSlaHistSummIndx
OBJECT-TYPE
This is an index for history summary. Its value can vary from 1 to 50.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.1Integer32 (1..50)not-accessiblecurrent
hpicfIpSlaHistSummStartTime
OBJECT-TYPE
Time at which the type-specified test was executed.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.2Unsigned32read-onlycurrent
hpicfIpSlaHistSummStatus
OBJECT-TYPE
The status of the IP SLA test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.3Unsigned32read-onlycurrent
hpicfIpSlaHistSummRTT
OBJECT-TYPE
The round-trip time for a successfully measured test.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.4Unsigned32read-onlycurrent
hpicfIpSlaHistSummResolvdIP
OBJECT-TYPE
Resolved IP address.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.5Unsigned32read-onlycurrent
hpicfIpSlaHistSummDescription
OBJECT-TYPE
Error description.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.6Unsigned32read-onlycurrent
hpicfIpSlaHistSummStoDDelay
OBJECT-TYPE
Source to destination delay.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.7Unsigned32read-onlycurrent
hpicfIpSlaHistSummDtoSDelay
OBJECT-TYPE
Destination to source delay.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.8Unsigned32read-onlycurrent
hpicfIpSlaHistAggrTable
OBJECT-TYPE
This table specifies the aggregate value of IP SLA result. The average value is calculating on last 25 probes. Or the calculation will do on the number of probes if the probe count is less than 25
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8not-accessiblecurrent
hpicfIpSlaHistAggrEntry
OBJECT-TYPE
An entry on this table specifies aggregate value of minimum, maximum and the average time taken from source to destination and vice versa.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1not-accessiblecurrent
hpicfIpSlaHistAggrMinRTT
OBJECT-TYPE
The minimum round-trip time for the last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.1Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxRTT
OBJECT-TYPE
The maximum round-trip time for the last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.2Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfRTT
OBJECT-TYPE
The number of RTTs that are successfully measured for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.3Unsigned32read-onlycurrent
hpicfIpSlaHistAggrAvgRTT
OBJECT-TYPE
The average round-trip time of last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.4Unsigned32read-onlycurrent
hpicfIpSlaHistAggrTotalRTT
OBJECT-TYPE
The total round-trip time of last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.5Unsigned32read-onlycurrent
hpicfIpSlaHistAggrRTT2
OBJECT-TYPE
The average of the sum of squares of RTTs for the last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.6Unsigned32read-onlycurrent
hpicfIpSlaHistAggrFrstProbStTime
OBJECT-TYPE
First probe start time.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.7Unsigned32read-onlycurrent
hpicfIpSlaHistAggrProbFailReason
OBJECT-TYPE
Probe failure reason.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.8Unsigned32read-onlycurrent
hpicfIpSlaHistAggrPacketLoss
OBJECT-TYPE
The percentage of packet loss in last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.9Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSentPktNum
OBJECT-TYPE
The total number of packets sent.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.10Unsigned32read-onlycurrent
hpicfIpSlaHistAggrRecvdPktNum
OBJECT-TYPE
The total number of packets received.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.11Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinStoDPostv
OBJECT-TYPE
The minimum positive jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.12Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxStoDPostv
OBJECT-TYPE
The maximum positive jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.13Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfPosSD
OBJECT-TYPE
The number of times source to destination jitter value became positive.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.14Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumOfPosSD
OBJECT-TYPE
The average of the sum of positive jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.15Unsigned32read-onlycurrent
hpicfIpSlaHistAggrAvgStoDPostv
OBJECT-TYPE
The average of the positive jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.16Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2PostvSD
OBJECT-TYPE
The aggregate of square sum of positive jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.17Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinDtoSPostv
OBJECT-TYPE
The minimum positive jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.18Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxDtoSPostv
OBJECT-TYPE
The maximum positive jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.19Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfPosDS
OBJECT-TYPE
The number of times destination to source jitter was positive.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.20Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumOfPosDS
OBJECT-TYPE
The sum of positive jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.21Unsigned32read-onlycurrent
hpicfIpSlaHistAggrAvgDtoSPostv
OBJECT-TYPE
The sum of average positive jitter values from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.22Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2PostvDS
OBJECT-TYPE
The aggregate of square sum of positive jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.23Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinStoDNegtv
OBJECT-TYPE
The minimum negative jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.24Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxStoDNegtv
OBJECT-TYPE
The maximum negative jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.25Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfNegSD
OBJECT-TYPE
The number of times jitter value from source to destination became negative.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.26Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumOfNegSD
OBJECT-TYPE
The sum of negative jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.27Unsigned32read-onlycurrent
hpicfIpSlaHistAggrAvgStoDNegtv
OBJECT-TYPE
The average of the negative jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.28Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2NegtvSD
OBJECT-TYPE
The aggregate of square sum of negative jitter value from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.29Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinDtoSNegtv
OBJECT-TYPE
The minimum negative jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.30Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxDtoSNegtv
OBJECT-TYPE
The maximum negative jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.31Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfNegDS
OBJECT-TYPE
The number of times jitter value from destination to source became negative.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.32Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumOfNegDS
OBJECT-TYPE
The sum of negative jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.33Unsigned32read-onlycurrent
hpicfIpSlaHistAggrAvgDtoSNegtv
OBJECT-TYPE
The average of the negative jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.34Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2NegtvDS
OBJECT-TYPE
The aggregate of square sum of negative jitter value from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.35Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinStoDDelay
OBJECT-TYPE
The minimum one-way time from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.36Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxStoDDelay
OBJECT-TYPE
The maximum one-way time from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.37Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumStoDDelay
OBJECT-TYPE
The sum of one-way time from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.38Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfDelaySD
OBJECT-TYPE
The number of times source to destination delay occurred for the last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.39Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2DelaySD
OBJECT-TYPE
The sum of squares of one-way delay from source to destination for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.40Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinDtoSDelay
OBJECT-TYPE
The minimum one-way delay from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.41Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxDtoSDelay
OBJECT-TYPE
The maximum one-way delay from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.42Unsigned32read-onlycurrent
hpicfIpSlaHistAggrNumOfDelayDS
OBJECT-TYPE
The number of times destination to source delay occurred for the last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.43Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSumDtoSDelay
OBJECT-TYPE
The sum of one-way delay from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.44Unsigned32read-onlycurrent
hpicfIpSlaHistAggrSum2DelayDS
OBJECT-TYPE
The sum of squares of one-way delay from destination to source for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.45Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinICPIF
OBJECT-TYPE
The minimum ICPIF value for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.46Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxICPIF
OBJECT-TYPE
The maximum ICPIF value for last 25 probes.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.47Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMinMOS
OBJECT-TYPE
The minimum MOS value for last 25 probes. The Value of this object is 100 times of the actual value.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.48Unsigned32read-onlycurrent
hpicfIpSlaHistAggrMaxMOS
OBJECT-TYPE
The maximum MOS value for last 25 probes. The Value of this object is 100 times of the actual value.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.49Unsigned32read-onlycurrent
hpicfIpSlaRespResultTable
OBJECT-TYPE
This table specifies the IP SLA responder result parameters as entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.9not-accessiblecurrent
hpicfIpSlaRespResultEntry
OBJECT-TYPE
An entry on this table specifies responder status and number of packets received and responded.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1not-accessiblecurrent
hpicfIpSlaRespStatus
OBJECT-TYPE
The status of the responder.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.1Unsigned32read-onlycurrent
hpicfIpSlaRespnumPktRcvd
OBJECT-TYPE
The number of packets received by the responder.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.2Unsigned32read-onlycurrent
hpicfIpSlaRespNumPktRespnd
OBJECT-TYPE
The number of packets sent by the responder.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.3Unsigned32read-onlycurrent
hpicfIpSlaJitterRespTable
OBJECT-TYPE
This table specifies IP SLA jitter responder parameters as entries.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10not-accessiblecurrent
hpicfIpSlaJitterRespEntry
OBJECT-TYPE
An entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1not-accessiblecurrent
hpicfIpSlaJitterRespType
OBJECT-TYPE
The SLA jitter responder type. The udpJitter and udpJitterVoIP values calculate one-way delay, therefore a timestamp has to be embedded while replying back. This is one of the indexes for hpicfIpSlaJitterRespTable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.1INTEGER {udpJitter(2), udpJitterVoIP(3)}not-accessiblecurrent
hpicfIpSlaJitterRespAddressType
OBJECT-TYPE
SLA jitter responder IP address type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.2InetAddressTyperead-createcurrent
hpicfIpSlaJitterRespAddress
OBJECT-TYPE
The local IP address to which the responder is bound. This is one of the indexes for hpicfIpSlaJitterRespTable.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.3InetAddressnot-accessiblecurrent
hpicfIpSlaJitterRespL4Port
OBJECT-TYPE
L4 port number on hpicfIpSlaJitterRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for hpicfIpSlaJitterRespTable. The allowed range is 1024 to 65535.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.4InetPortNumbernot-accessiblecurrent
hpicfIpSlaJitterRespSrcAddrType
OBJECT-TYPE
SLA jitter responder source IP address type.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.5InetAddressTyperead-createcurrent
hpicfIpSlaJitterRespSrcAddress
OBJECT-TYPE
The source IP address to which the responder is responding.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.6InetAddressnot-accessiblecurrent
hpicfIpSlaJitterRespRowStatus
OBJECT-TYPE
SLA jitter responder row status.
1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.7RowStatusread-createcurrent
hpicfIpSlaConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.127.2
hpicfIpSlaGroups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1
hpicfIpSlaCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.127.2.2

Notifications

NameOIDStatus
hpicfIpSlaThresholdexceeded
NOTIFICATION-TYPE
This notification is generated when the metric calculated from the SLA result exceeds the configured threshold value. The hpicfIpSlaThrUpper is not applicable when hpicfIpSlaThrMetricType is set to packetLoss or testCompletion.
1.3.6.1.4.1.11.2.14.11.5.1.127.0.1current
hpicfIpSlaTestCompletion
NOTIFICATION-TYPE
This notification is generated when the SLA test is completed either by reaching stopTime or hpicfIpSlaAttrNumPkts. This notification is sent only when the action type is set to trap or trap-log.
1.3.6.1.4.1.11.2.14.11.5.1.127.0.2current
hpicfIpSlaThresholdPktLoss
NOTIFICATION-TYPE
This notification is generated when SLA test probe reply packets are lost consecutively for the configured number of hpicfIpSlaThrCount. This notification is sent only when the action type is set to trap or trap-log.
1.3.6.1.4.1.11.2.14.11.5.1.127.0.3current

Conformance

NameOIDStatus
hpicfIpSlaGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.1current
hpicfIpSlaAttrGroup
OBJECT-GROUP
A group with a set of IP SLA attribute objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.2deprecated
hpicfIpSlaThrGroup
OBJECT-GROUP
A group with a set of IP SLA threshold objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.3current
hpicfIpSlaRespGroup
OBJECT-GROUP
A group with a set of IP SLA responder objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.4current
hpicfIpSlaNotificationsGroup
NOTIFICATION-GROUP
A collection of IP SLA source and responder notifications objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.5current
hpicfIpSlaMsgGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA result objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.6current
hpicfIpSlaHistGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA history objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.7current
hpicfIpSlaHistSummGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA history summary objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.8current
hpicfIpSlaAttrGroup1
OBJECT-GROUP
A group with a set of IP SLA attribute objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.9current
hpicfIpSlaHistAggrGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA aggregate result summary objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.10current
hpicfIpSlaRespResultGroup
OBJECT-GROUP
A mandatory group with a set of IP SLA responder objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.11current
hpicfIpSlaJitterRespGroup
OBJECT-GROUP
A group with a set of IP SLA jitter responder objects.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.12current
hpicfIpSlaCompliance
MODULE-COMPLIANCE
The compliance statement for HP switches that support IP SLA.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.1deprecated
hpicfIpSlaCompliance1
MODULE-COMPLIANCE
The compliance statement for HP switches that support IP SLA.
1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.2current