HP700RX-MIB
- Registered at
- 1.3.6.1.4.1.11.2.3.9.3
- Namespace
- hp
- Source file
HP700RX-MIB- Digest
sha256:39e41f3331e720fb0349012a377d80b30be87e048ab339421a846aa02f30f6c1
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HP700RX-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hp OBJECT-IDENTITY | 1.3.6.1.4.1.11 | |||
| nm OBJECT-IDENTITY | 1.3.6.1.4.1.11.2 | |||
| system OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3 | |||
| netPeripherals OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9 | |||
| hpXStation OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3 | |||
| config OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1 | |||
| terminal OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.1 | |||
| monitor OBJECT-TYPE The type of monitor the terminal is configured to drive. Each monitor type varies in resolution, refresh rate, color capability, dots per inch, and synchronization. Some monitors (especially multi-sync types) may produce usable displays at several settings. | 1.3.6.1.4.1.11.2.3.9.3.1.1.1 | INTEGER {a1097(1), hp98754(2), hp98789(3), hpd1187(4), hpa1497(5), hp98753(6), hp98785(7), hpd1188(8), hpd1195(9), hpd1182(10), hp98774(11), hpd1195x1224(12), hpd1195x640(13)} | read-write | mandatory |
| monitorDescription OBJECT-TYPE The resolution, refresh rate, color capability, dots per inch, and synchronization the terminal is sending to its monitor and the part number of the monitor that works best at these settings. | 1.3.6.1.4.1.11.2.3.9.3.1.1.2 | DisplayString | read-only | mandatory |
| at2kbLEDControl OBJECT-TYPE Indicates whether the CAPS-LOCK LED on the keyboard (if present) is controlled by the X terminal or the clients (as X LED 3). | 1.3.6.1.4.1.11.2.3.9.3.1.1.3 | INTEGER {client(1), local(2)} | read-write | mandatory |
| at2kbLanguage OBJECT-TYPE The language setting for an AT/2 keyboard attached to this terminal. | 1.3.6.1.4.1.11.2.3.9.3.1.1.4 | INTEGER {usascii(1), danish(2), french(3), norwegian(4), swissgerman(5), candianfrench(6), english(7), finnish(8), belgian(9), spanish(10), german(11), swedish(12), dutch(13), italian(14), candianenglish(15), swissfrench(16), hangul(17), simplifiedchinese(18), traditionalchinese(19), kanji(20), decLK401english(21), reserved(22)} | read-write | mandatory |
| serialSpeed OBJECT-TYPE The baud rate of the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.1.5 | INTEGER {bps75(1), bps150(2), bps300(3), bps600(4), bps1200(5), bps2400(6), bps4800(7), bps9600(8), bps19200(9), bps38400(10)} | read-write | mandatory |
| serialDataBits OBJECT-TYPE The number of data bits in each character sent and received over the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.1.6 | INTEGER {bits7(1), bits8(2)} | read-write | mandatory |
| serialStopBits OBJECT-TYPE The number of stop bits sent at the end of each character sent through the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.1.7 | INTEGER {bits1(1), bits2(2)} | read-write | mandatory |
| serialParity OBJECT-TYPE The parity generated and checked on each character sent and received through the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.1.8 | INTEGER {none(1), even(2), odd(3)} | read-write | mandatory |
| serialPacing OBJECT-TYPE The type of flow control used on the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.1.9 | INTEGER {none(1), xonxoff(2), rtscts(3)} | read-write | mandatory |
| serialUse OBJECT-TYPE What the serial port is being used for. Note that primary and auxiliary use indicate that the serial port is 'connected' to TCP ports 9100 and 9101 respectively. | 1.3.6.1.4.1.11.2.3.9.3.1.1.10 | INTEGER {disabled(1), primary(2), auxiliary(3), diagnostics(4), serialsession(5), slip(6)} | read-write | mandatory |
| parallelUse OBJECT-TYPE What the parallel port is being used for. Note that primary and auxiliary use indicate that the serial port is 'connected' to TCP ports 9100 and 9101 respectively. | 1.3.6.1.4.1.11.2.3.9.3.1.1.11 | INTEGER {disabled(1), primary(2), auxiliary(3), diagnostics(4)} | read-write | mandatory |
| portuseEnable OBJECT-TYPE This variable indicates whether remote (through SNMP) serial port use changes are allowed. | 1.3.6.1.4.1.11.2.3.9.3.1.1.12 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| network OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.2 | |||
| networkParamsFrom OBJECT-TYPE Indicates whether the X terminal will use bootp to get its network parameters (IP address, default gateway, boot file, terminal name, domain name, name server addresses, subnet mask, and remote configuration file) at power up or use those stored in EEPROM. | 1.3.6.1.4.1.11.2.3.9.3.1.2.1 | INTEGER {bootp(1), eeprom(2)} | read-write | mandatory |
| configedAddress OBJECT-TYPE The IP address configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can be saved to terminal memory without being used, therefore the value returned via SNMP is not necessarily the value currently in use. | 1.3.6.1.4.1.11.2.3.9.3.1.2.2 | DisplayString | read-write | mandatory |
| configedSubnetMask OBJECT-TYPE The subnet mask configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can be saved to terminal memory without being used, therefore the value returned via SNMP is not necessarily the value currently in use. | 1.3.6.1.4.1.11.2.3.9.3.1.2.3 | DisplayString | read-write | mandatory |
| configedRouteTable OBJECT-TYPE The routes configured for this terminal. At startup the terminal tests the routes in its routing table. If any route fails, it will be discarded, therefore the configured routes may not be the routes in use. There are a number of ways a route can fail the startup tests, including: terminal can't ping the gateway, terminal can't resolve one of the names into an IP address, or a specified gateway is not on a connected subnet. | 1.3.6.1.4.1.11.2.3.9.3.1.2.4 | not-accessible | mandatory | |
| routeTableEntry OBJECT-TYPE Each entry reflects one route. | 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1 | not-accessible | mandatory | |
| routeIndex OBJECT-TYPE The number of a row in the gateway table on the Network config screen. | 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.1 | INTEGER | read-only | mandatory |
| routeGateway OBJECT-TYPE The address of an intermediate machine to send packets to. Note that this is a string and may be either a dotted decimal IP address or a domain name. | 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.2 | DisplayString | read-write | mandatory |
| routeDestination OBJECT-TYPE The final destination address for this route. This may be a machine or a network. Note that this is a string and may be either a dotted decimal IP address or a domain name. | 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.3 | DisplayString | read-write | mandatory |
| primaryFileServer OBJECT-TYPE The address of the first file server the terminal attempts to contact at startup. This may be either a node name (in which case it will be resolved to an address using Domain Name Resolution) or it may be an IP address in dotted decimal form. | 1.3.6.1.4.1.11.2.3.9.3.1.2.5 | DisplayString | read-write | mandatory |
| primaryAccessMethod OBJECT-TYPE The method used to read files from the primary file server. This method may be overridden for individual paths. | 1.3.6.1.4.1.11.2.3.9.3.1.2.6 | INTEGER {tftp(1), nfs(2)} | read-write | mandatory |
| alternateFileServer OBJECT-TYPE The address of the file server the terminal will attempt to contact at startup if the primary file server cannot be reached. This address may be the node name (in which case it will be resolved to an address before use using the Domain Name Resolution) or it may be the address in dotted decimal form. | 1.3.6.1.4.1.11.2.3.9.3.1.2.7 | DisplayString | read-write | mandatory |
| alternateAccessMethod OBJECT-TYPE The method used to read files from the alternative file server. This method may be overridden for individual pathes. | 1.3.6.1.4.1.11.2.3.9.3.1.2.8 | INTEGER {tftp(1), nfs(2)} | read-write | mandatory |
| fileTimeout OBJECT-TYPE The maximum time (in seconds) that the terminal will wait for a response to a request to the file server before giving up. The name resolver timeout is six times the file timeout. | 1.3.6.1.4.1.11.2.3.9.3.1.2.9 | INTEGER | read-write | mandatory |
| primaryNameServer OBJECT-TYPE The primary name server's IP address in dotted decimal format. | 1.3.6.1.4.1.11.2.3.9.3.1.2.10 | DisplayString | read-write | mandatory |
| alternateNameServer OBJECT-TYPE The alternative name server's IP address in dotted decimal format. If no answer is received from the primary name server, the terminal attempts to contact this name server. | 1.3.6.1.4.1.11.2.3.9.3.1.2.11 | DisplayString | read-write | mandatory |
| domain OBJECT-TYPE The fully qualified domain of the network to which the terminal is connected. This includes all parts following the first '.' (dot) in the fully qualified host name of the terminal. Typical examples are hp.com or waterloo.edu | 1.3.6.1.4.1.11.2.3.9.3.1.2.12 | DisplayString | read-write | mandatory |
| terminalName OBJECT-TYPE The name assigned to this terminal. This name should correspond to the name assigned using the Domain Name service, Network Information Services, and other host address lookup mechanisms. | 1.3.6.1.4.1.11.2.3.9.3.1.2.13 | DisplayString | read-write | mandatory |
| slipLocalAddress OBJECT-TYPE The address used for the terminal end of the SLIP connection. | 1.3.6.1.4.1.11.2.3.9.3.1.2.14 | DisplayString | read-write | mandatory |
| slipRemoteAddress OBJECT-TYPE The address used for the remote (host) end end of the SLIP connection. | 1.3.6.1.4.1.11.2.3.9.3.1.2.15 | DisplayString | read-write | mandatory |
| slipMask OBJECT-TYPE The subnet mask configured for the SLIP interface on this terminal. | 1.3.6.1.4.1.11.2.3.9.3.1.2.16 | DisplayString | read-write | mandatory |
| startup OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.3 | |||
| romFonts OBJECT-TYPE Controls whether or not fonts are read from the ROM card (if present). | 1.3.6.1.4.1.11.2.3.9.3.1.3.1 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| rgbFileFrom OBJECT-TYPE Controls whether or not the rgb.txt file is read from the ROM card (if present). | 1.3.6.1.4.1.11.2.3.9.3.1.3.2 | INTEGER {network(1), rom(2)} | read-write | mandatory |
| bootFileFrom OBJECT-TYPE Controls whether or not the X server file is read from the ROM card (if present). | 1.3.6.1.4.1.11.2.3.9.3.1.3.3 | INTEGER {network(1), rom(2)} | read-write | mandatory |
| bootFileName OBJECT-TYPE The name of the X server file to load. This may be a complete path (starting with /) and may include host and access method overrides. | 1.3.6.1.4.1.11.2.3.9.3.1.3.4 | DisplayString | read-write | mandatory |
| remoteConfigEnabled OBJECT-TYPE Controls whether or not the remote config file is read from the file server at startup. | 1.3.6.1.4.1.11.2.3.9.3.1.3.5 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| remoteConfigFile OBJECT-TYPE The name of the remote config file to load at startup. This may be a complete path (starting with /) and include host and access method overrides. | 1.3.6.1.4.1.11.2.3.9.3.1.3.6 | DisplayString | read-write | mandatory |
| xdmcpEnabled OBJECT-TYPE Controls whether or not XDMCP is used to start user sessions on this terminal. | 1.3.6.1.4.1.11.2.3.9.3.1.3.7 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| xdmcpType OBJECT-TYPE Controls the type of XDMCP request sent from the terminal at startup. | 1.3.6.1.4.1.11.2.3.9.3.1.3.8 | INTEGER {broadcast(1), direct(2), indirect(3)} | read-write | mandatory |
| xdmcpHost OBJECT-TYPE The address of the host to which the terminal sends XDMCP requests at startup. This field is ignored if XDMCP type is BROADCAST. | 1.3.6.1.4.1.11.2.3.9.3.1.3.9 | DisplayString | read-write | mandatory |
| telnetAutoStart OBJECT-TYPE Determines whether a TELNET session is auto- started at boot time. TELNET can be used to start a user session, but TELNET cannot be used if XDMCP is enabled. | 1.3.6.1.4.1.11.2.3.9.3.1.3.10 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| telnetCharSet OBJECT-TYPE Controls the character set used to display characters in the TELNET and serial terminal sessions. | 1.3.6.1.4.1.11.2.3.9.3.1.3.11 | INTEGER {usascii(1), isoLatin1(2), hpRoman8(3)} | read-write | mandatory |
| telnetHost OBJECT-TYPE The address of the host to attempt to connect to when TELNET is (auto)started. This may be a name or IP address in dotted decimal format. | 1.3.6.1.4.1.11.2.3.9.3.1.3.12 | DisplayString | read-write | mandatory |
| fontPathTable OBJECT-TYPE A list of directory paths used when by the X server when searching for fonts | 1.3.6.1.4.1.11.2.3.9.3.1.3.13 | not-accessible | mandatory | |
| fontEntry OBJECT-TYPE An single path to a set of font files. | 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1 | not-accessible | mandatory | |
| fontIndex OBJECT-TYPE The index into the list of font paths. | 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1.1 | INTEGER | read-only | mandatory |
| fontPath OBJECT-TYPE The actual font path in the format appropriate to the operating system in use. | 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1.2 | DisplayString | read-write | mandatory |
| statistics OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.4 | |||
| memInstalled OBJECT-TYPE The amount of memory installed in the terminal (excluding video memory) in Kbytes. | 1.3.6.1.4.1.11.2.3.9.3.1.4.1 | INTEGER | read-only | mandatory |
| memFree OBJECT-TYPE The amount of memory in the free pool (including free video memory). This is the total amount of memory that is not currently in use in the terminal. | 1.3.6.1.4.1.11.2.3.9.3.1.4.2 | INTEGER | read-only | mandatory |
| memLowMark OBJECT-TYPE The size of the free pool at its smallest since the last time this counter was reset. | 1.3.6.1.4.1.11.2.3.9.3.1.4.3 | INTEGER | read-only | mandatory |
| memFrags OBJECT-TYPE The number of fragments (of all sizes) in the memory free pool. | 1.3.6.1.4.1.11.2.3.9.3.1.4.4 | INTEGER | read-only | mandatory |
| memLargestFrag OBJECT-TYPE The size of the largest fragment in the free pool in Kbytes. This represents the largest request for memory that can be fulfilled by the terminal. | 1.3.6.1.4.1.11.2.3.9.3.1.4.5 | INTEGER | read-only | mandatory |
| memBackingstore OBJECT-TYPE The amount of memory used for backingstore in Kbytes. | 1.3.6.1.4.1.11.2.3.9.3.1.4.6 | INTEGER | read-only | mandatory |
| memReclaims OBJECT-TYPE The number of times memory has been reclaimed from backing store for other uses. | 1.3.6.1.4.1.11.2.3.9.3.1.4.7 | Counter | read-only | mandatory |
| serialInOctets OBJECT-TYPE The number of octets received through the serial port since the last time this counter was reset. | 1.3.6.1.4.1.11.2.3.9.3.1.4.8 | Counter | read-only | mandatory |
| serialOutOctets OBJECT-TYPE The number of octets sent out the serial port since The last time this counter was reset. | 1.3.6.1.4.1.11.2.3.9.3.1.4.9 | Counter | read-only | mandatory |
| serialInErrors OBJECT-TYPE The number of errors detected on data received in the serial port. | 1.3.6.1.4.1.11.2.3.9.3.1.4.10 | Counter | read-only | mandatory |
| parallelOutOctets OBJECT-TYPE The number of octets sent out the parallel port since the last time this counter was reset. | 1.3.6.1.4.1.11.2.3.9.3.1.4.11 | Counter | read-only | mandatory |
| parallelErrors OBJECT-TYPE The number of errors detected in sending data out the parallel port since the last time this counter was reset. | 1.3.6.1.4.1.11.2.3.9.3.1.4.12 | Counter | read-only | mandatory |
| etherInPackets OBJECT-TYPE The number of packets received over Ethernet. | 1.3.6.1.4.1.11.2.3.9.3.1.4.13 | Counter | read-only | mandatory |
| etherInCRCErrors OBJECT-TYPE The number of CRC errors detected in Ethernet packets. | 1.3.6.1.4.1.11.2.3.9.3.1.4.14 | Counter | read-only | mandatory |
| etherInNoBuffers OBJECT-TYPE The number of time the Ethernet interface hardware could not receive packets because no buffers were available. | 1.3.6.1.4.1.11.2.3.9.3.1.4.15 | Counter | read-only | mandatory |
| etherInRunts OBJECT-TYPE The number of packets received on the Ethernet interface that were shorter then the shortest permitted packet. | 1.3.6.1.4.1.11.2.3.9.3.1.4.16 | Counter | read-only | mandatory |
| etherInOctets OBJECT-TYPE The number of octets received on the Ethernet interface. | 1.3.6.1.4.1.11.2.3.9.3.1.4.17 | Counter | read-only | mandatory |
| etherOutPackets OBJECT-TYPE The number of packets sent out the Ethernet interface. | 1.3.6.1.4.1.11.2.3.9.3.1.4.18 | Counter | read-only | mandatory |
| etherOutOneCollisions OBJECT-TYPE The number of times the Ethernet interface had to back off once due to a collision. | 1.3.6.1.4.1.11.2.3.9.3.1.4.19 | Counter | read-only | mandatory |
| etherOutTwoCollisions OBJECT-TYPE The number of times the Ethernet interface had to back off twice due to collisions. | 1.3.6.1.4.1.11.2.3.9.3.1.4.20 | Counter | read-only | mandatory |
| etherOutMoreCollisions OBJECT-TYPE The number of messages for which the Ethernet interface had to back off more then twice (but less then the maximum number of times) due to collisions. | 1.3.6.1.4.1.11.2.3.9.3.1.4.21 | Counter | read-only | mandatory |
| etherOutMaxCollisions OBJECT-TYPE The number of times that the Ethernet interface was unable to transmit a packet due to too many collisions. | 1.3.6.1.4.1.11.2.3.9.3.1.4.22 | Counter | read-only | mandatory |
| etherOutNoBuffers OBJECT-TYPE The number of times that the Ethernet interface software had to drop an outbound packet because there were no more interface transmit buffers. | 1.3.6.1.4.1.11.2.3.9.3.1.4.23 | Counter | read-only | mandatory |
| etherOutOctets OBJECT-TYPE The number of octets sent out the Ethernet interface. | 1.3.6.1.4.1.11.2.3.9.3.1.4.24 | Counter | read-only | mandatory |
| tftpTimeouts OBJECT-TYPE The number of times that the tftp driver has not gotten a response within the file timeout period. This is not the number of retransmits performed by the tftp driver but is the number of completely failed requests. | 1.3.6.1.4.1.11.2.3.9.3.1.4.25 | Counter | read-only | mandatory |
| statsTime OBJECT-TYPE The statistics information can be cleared (to zero) by depressing a button on the statistics screen. This variable indicates the time since this was last done. It is the amount of time over which statistics have been collected. | 1.3.6.1.4.1.11.2.3.9.3.1.4.26 | TimeTicks | read-only | mandatory |
| slipInPackets OBJECT-TYPE The number of packets received over the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.27 | Counter | read-only | mandatory |
| slipInOctets OBJECT-TYPE The number of octets received over the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.28 | Counter | read-only | mandatory |
| slipInErrs OBJECT-TYPE The number of errors encountered on received octets on the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.29 | Counter | read-only | mandatory |
| slipOutPackets OBJECT-TYPE The number of packets transmitted over the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.30 | Counter | read-only | mandatory |
| slipOutOctets OBJECT-TYPE The number of octets transmitted over the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.31 | Counter | read-only | mandatory |
| slipOutErrors OBJECT-TYPE The number of errors encountered while transmitting over the serial interface while running SLIP. | 1.3.6.1.4.1.11.2.3.9.3.1.4.32 | Counter | read-only | mandatory |
| etherInAlignErrors OBJECT-TYPE The number of packets received on the Ethernet interface that were not an integral number of octets in length. | 1.3.6.1.4.1.11.2.3.9.3.1.4.33 | Counter | read-only | mandatory |
| etherInCollisions OBJECT-TYPE The number of collisions detected on the Ethernet interface that were after the start of the normal packet. | 1.3.6.1.4.1.11.2.3.9.3.1.4.34 | Counter | read-only | mandatory |
| preferences OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.5 | |||
| clientAuthentication OBJECT-TYPE Controls whether MIT-MAGIC-COOKIE authentication is used by the server during client connection. If enabled, the client must pass a valid MAGIC_COOKIE to the server during the connection sequence. This feature can only be used with XDMCP enabled. | 1.3.6.1.4.1.11.2.3.9.3.1.5.1 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| accessControls OBJECT-TYPE This determines whether host access controls are used by the server during client connection. If enabled, only those clients running on hosts listed in the terminal's access control file will be allowed to connect to the X server. This file is read from the host using the path /usr/tftpdir/usr/lib/X11/700X/etc/ipaddress.hosts. | 1.3.6.1.4.1.11.2.3.9.3.1.5.2 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| r3BugCompatability OBJECT-TYPE This determines whether the server behaves like an X11R3 server for certain specific operations. | 1.3.6.1.4.1.11.2.3.9.3.1.5.3 | INTEGER {disabled(1), enabled(2)} | read-write | mandatory |
| reset OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.9.3.1.6 | |||
| resetEnable OBJECT-TYPE This variable indicates whether remote (through SNMP) resets are allowed. | 1.3.6.1.4.1.11.2.3.9.3.1.6.1 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| reboot OBJECT-TYPE Setting this variable to zero will cause the X terminal to reset. | 1.3.6.1.4.1.11.2.3.9.3.1.6.2 | INTEGER {reset(1), dont(2)} | read-write | mandatory |
| interface OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.4 | |||
| icmp OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.7 | |||
| snmp OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.13 | |||
| trap OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.13.1 | |||
| snmpdConf OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.13.2 |