HP-SN-IPX-MIB
- Registered at
- 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.3.6.1.4.1.11.2.3.7.11.12.2.1.21.3.6.1.4.1.11.2.3.7.11.12.2.1.31.3.6.1.4.1.11.2.3.7.11.12.2.1.41.3.6.1.4.1.11.2.3.7.11.12.2.1.51.3.6.1.4.1.11.2.3.7.11.12.2.1.61.3.6.1.4.1.11.2.3.7.11.12.2.1.71.3.6.1.4.1.11.2.3.7.11.12.2.1.81.3.6.1.4.1.11.2.3.7.11.12.2.1.91.3.6.1.4.1.11.2.3.7.11.12.2.1.101.3.6.1.4.1.11.2.3.7.11.12.2.1.111.3.6.1.4.1.11.2.3.7.11.12.2.1.12
- Namespace
- hp
- Source file
HP-SN-IPX-MIB- Digest
sha256:a11cd843a873763172bf5e78d4d4e4765921df7b7c2130b36541b382dcf8c0d5
Imports
| From | Symbols |
|---|---|
| HP-SN-ROOT-MIB | snIpx |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HP-SN-IPX-MIB HP-SN-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Action type | ||||
| ClearStatus type | ||||
| NetNumber type | ||||
| PhysAddress type | ||||
| PortIndex type | ||||
| RtrStatus type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| snIpxGen OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 | |||
| snIpxRoutingMode OBJECT-TYPE Enabled/Disabled System IPX Routing Mode status. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 | RtrStatus | read-write | mandatory |
| snIpxNetBiosFilterMode OBJECT-TYPE Enabled/Disabled NetBios Filter Mode status. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 | RtrStatus | read-write | mandatory |
| snIpxClearCache OBJECT-TYPE clear(1) will clear cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 | ClearStatus | read-write | mandatory |
| snIpxClearRoute OBJECT-TYPE clear(1) will clear ipx route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 | ClearStatus | read-write | mandatory |
| snIpxClearTrafficCnts OBJECT-TYPE clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 | ClearStatus | read-write | mandatory |
| snIpxRcvPktsCnt OBJECT-TYPE IPX incoming packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 | Counter | read-only | mandatory |
| snIpxTxPktsCnt OBJECT-TYPE IPX Outgoing packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 | Counter | read-only | mandatory |
| snIpxFwdPktsCnt OBJECT-TYPE IPX forwarding packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 | Counter | read-only | mandatory |
| snIpxRcvDropPktsCnt OBJECT-TYPE IPX receiving drop packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 | Counter | read-only | mandatory |
| snIpxRcvFiltPktsCnt OBJECT-TYPE IPX receiving filter packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 | Counter | read-only | mandatory |
| snIpxRipGblFiltList OBJECT-TYPE An IPX RIP Global Filter List. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 | OCTET STRING (SIZE(1..32)) | read-write | mandatory |
| snIpxRipFiltOnAllPort OBJECT-TYPE Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 | INTEGER {valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)} | read-write | mandatory |
| snIpxSapGblFiltList OBJECT-TYPE An IPX SAP Global Filter List. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 | OCTET STRING (SIZE(1..32)) | read-write | mandatory |
| snIpxSapFiltOnAllPort OBJECT-TYPE Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 | INTEGER {valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)} | read-write | mandatory |
| snIpxTxDropPktsCnt OBJECT-TYPE IPX transmitting drop packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 | Counter | read-only | mandatory |
| snIpxTxFiltPktsCnt OBJECT-TYPE IPX transmitting filter packets counter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 | Counter | read-only | mandatory |
| snIpxCache OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 | |||
| snIpxCacheTable OBJECT-TYPE IPX Cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 | not-accessible | mandatory | |
| snIpxCacheEntry OBJECT-TYPE An entry in the IPX Cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 | not-accessible | mandatory | |
| snIpxCacheIndex OBJECT-TYPE The table index for a IPX Cache entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 | INTEGER | read-only | mandatory |
| snIpxCacheNetNum OBJECT-TYPE Cache Network number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 | NetNumber | read-only | mandatory |
| snIpxCacheNode OBJECT-TYPE Cache Node Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 | PhysAddress | read-only | mandatory |
| snIpxCacheOutFilter OBJECT-TYPE Cache Outbound Filter is ether disabled(0) or enabled(1). | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 | RtrStatus | read-only | mandatory |
| snIpxCacheEncap OBJECT-TYPE The IPX encapsulation frame type. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 | INTEGER {ethernetII(1), ethernet8022(2), ethernet8023(3), ethernetSnap(4)} | read-only | mandatory |
| snIpxCachePort OBJECT-TYPE IPX Router Port number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 | PortIndex | read-only | mandatory |
| snIpxRoute OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 | |||
| snIpxRouteTable OBJECT-TYPE IPX route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 | not-accessible | mandatory | |
| snIpxRouteEntry OBJECT-TYPE An entry in the IPX route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 | not-accessible | mandatory | |
| snIpxRouteIndex OBJECT-TYPE The table index for a IPX route entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 | INTEGER | read-only | mandatory |
| snIpxDestNetNum OBJECT-TYPE Destination Network number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 | NetNumber | read-only | mandatory |
| snIpxFwdRouterNode OBJECT-TYPE Forward Router Node Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 | PhysAddress | read-only | mandatory |
| snIpxDestHopCnts OBJECT-TYPE Number of hops to reach the destination. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 | INTEGER | read-only | mandatory |
| snIpxRouteMetric OBJECT-TYPE The metrics to next hop router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 | INTEGER | read-only | mandatory |
| snIpxDestPort OBJECT-TYPE The destination port. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 | INTEGER | read-only | mandatory |
| snIpxServer OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 | |||
| snIpxServerTable OBJECT-TYPE IPX Server table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 | not-accessible | mandatory | |
| snIpxServerEntry OBJECT-TYPE An entry in the IPX Server table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 | not-accessible | mandatory | |
| snIpxServerIndex OBJECT-TYPE The table index for a IPX Server entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 | INTEGER | read-only | mandatory |
| snIpxServerType OBJECT-TYPE IPX Server Type. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 | INTEGER | read-only | mandatory |
| snIpxServerNetNum OBJECT-TYPE Server Network number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 | NetNumber | read-only | mandatory |
| snIpxServerNode OBJECT-TYPE Server Node Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 | PhysAddress | read-only | mandatory |
| snIpxServerSocket OBJECT-TYPE Server Socket Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 | INTEGER | read-only | mandatory |
| snIpxServerHopCnts OBJECT-TYPE Number of intervening networks to reach the server. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 | INTEGER | read-only | mandatory |
| snIpxServerName OBJECT-TYPE IPX Server Name. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 | OCTET STRING (SIZE(0..47)) | read-only | mandatory |
| snIpxFwdFilter OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 | |||
| snIpxFwdFilterTable OBJECT-TYPE IPX Forward Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 | not-accessible | mandatory | |
| snIpxFwdFilterEntry OBJECT-TYPE An entry in the IPX Forward Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 | not-accessible | mandatory | |
| snIpxFwdFilterId OBJECT-TYPE The filter ID for a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 | INTEGER | read-only | mandatory |
| snIpxFwdFilterAction OBJECT-TYPE Action to take if the ipx packet match with this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 | Action | read-write | mandatory |
| snIpxFwdFilterSocket OBJECT-TYPE IPX Forward Filter Socket Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 | INTEGER | read-write | mandatory |
| snIpxFwdFilterSrcNet OBJECT-TYPE Source Network Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 | NetNumber | read-write | mandatory |
| snIpxFwdFilterSrcNode OBJECT-TYPE Source Node Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 | PhysAddress | read-write | mandatory |
| snIpxFwdFilterDestNet OBJECT-TYPE Destination Network Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 | NetNumber | read-write | mandatory |
| snIpxFwdFilterDestNode OBJECT-TYPE Destination Node Number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 | PhysAddress | read-write | mandatory |
| snIpxFwdFilterRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxRipFilter OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 | |||
| snIpxRipFilterTable OBJECT-TYPE IPX RIP Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 | not-accessible | mandatory | |
| snIpxRipFilterEntry OBJECT-TYPE An entry in the IPX RIP Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 | not-accessible | mandatory | |
| snIpxRipFilterId OBJECT-TYPE The filter ID for a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 | INTEGER | read-only | mandatory |
| snIpxRipFilterAction OBJECT-TYPE Action to take if the ipx packet match with this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 | Action | read-write | mandatory |
| snIpxRipFilterNet OBJECT-TYPE IPX RIP Filter Network number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 | NetNumber | read-write | mandatory |
| snIpxRipFilterMask OBJECT-TYPE IPX RIP Filter Network/Subnet Mask. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 | NetNumber | read-write | mandatory |
| snIpxRipFilterRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxSapFilter OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7 | |||
| snIpxSapFilterTable OBJECT-TYPE IPX SAP Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 | not-accessible | mandatory | |
| snIpxSapFilterEntry OBJECT-TYPE An entry in the IPX SAP Filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 | not-accessible | mandatory | |
| snIpxSapFilterId OBJECT-TYPE The filter ID for a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 | INTEGER | read-only | mandatory |
| snIpxSapFilterAction OBJECT-TYPE Action to take if the ipx packet match with this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 | Action | read-write | mandatory |
| snIpxSapFilterType OBJECT-TYPE IPX SAP Filter type to be matched. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 | INTEGER | read-write | mandatory |
| snIpxSapFilterName OBJECT-TYPE IPX SAP Filter Name. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 | OCTET STRING (SIZE(0..47)) | read-write | mandatory |
| snIpxSapFilterRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxIfFwdAccess OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8 | |||
| snIpxIfFwdAccessTable OBJECT-TYPE IPX IF Forward Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 | not-accessible | mandatory | |
| snIpxIfFwdAccessEntry OBJECT-TYPE An entry in the IPX Forward Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 | not-accessible | mandatory | |
| snIpxIfFwdAccessPort OBJECT-TYPE The IPX interface to which the Forward Filter applies. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 | INTEGER | read-only | mandatory |
| snIpxIfFwdAccessDir OBJECT-TYPE The access direction of incoming packet filter or outgoing packet filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 | INTEGER {in(1), out(2)} | read-only | mandatory |
| snIpxIfFwdAccessFilterList OBJECT-TYPE An IPX IF Forward Filter List. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 | OCTET STRING (SIZE(1..32)) | read-write | mandatory |
| snIpxIfFwdAccessRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxIfRipAccess OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9 | |||
| snIpxIfRipAccessTable OBJECT-TYPE IPX IF RIP Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 | not-accessible | mandatory | |
| snIpxIfRipAccessEntry OBJECT-TYPE An entry in the IPX Forward Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 | not-accessible | mandatory | |
| snIpxIfRipAccessPort OBJECT-TYPE The IPX interface to which the RIP Filter applies. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 | INTEGER | read-only | mandatory |
| snIpxIfRipAccessDir OBJECT-TYPE The access direction of incoming packet filter or outgoing packet filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 | INTEGER {in(1), out(2)} | read-only | mandatory |
| snIpxIfRipAccessFilterList OBJECT-TYPE An IPX IF RIP Access Filter List. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 | OCTET STRING (SIZE(1..32)) | read-write | mandatory |
| snIpxIfRipAccessRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxIfSapAccess OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10 | |||
| snIpxIfSapAccessTable OBJECT-TYPE IPX IF RIP Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 | not-accessible | mandatory | |
| snIpxIfSapAccessEntry OBJECT-TYPE An entry in the IPX Forward Access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 | not-accessible | mandatory | |
| snIpxIfSapAccessPort OBJECT-TYPE The IPX interface to which the SAP Filter applies. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 | INTEGER | read-only | mandatory |
| snIpxIfSapAccessDir OBJECT-TYPE The access direction of incoming packet filter or outgoing packet filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 | INTEGER {in(1), out(2)} | read-only | mandatory |
| snIpxIfSapAccessFilterList OBJECT-TYPE An IPX IF SAP Access Filter List. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 | OCTET STRING (SIZE(1..32)) | read-write | mandatory |
| snIpxIfSapAccessRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxPortAddr OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 | |||
| snIpxPortAddrTable OBJECT-TYPE IPX port address table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 | not-accessible | mandatory | |
| snIpxPortAddrEntry OBJECT-TYPE An entry in the IPX Port Address table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 | not-accessible | mandatory | |
| snIpxPortAddrPort OBJECT-TYPE The port index for port address entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 | PortIndex | read-only | mandatory |
| snIpxPortAddrEncap OBJECT-TYPE The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 | INTEGER {ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4)} | read-only | mandatory |
| snIpxPortAddrNetNum OBJECT-TYPE An unique Network number for the IPX interface port. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 | NetNumber | read-write | mandatory |
| snIpxPortAddrRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snIpxPortAddrNetBiosFilterMode OBJECT-TYPE Enabled/Disabled NetBios Filter Mode status per Port Address entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 | RtrStatus | read-write | mandatory |
| snIpxPortCounters OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 | |||
| snIpxPortCountersTable OBJECT-TYPE IPX port Counters table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 | not-accessible | mandatory | |
| snIpxPortCountersEntry OBJECT-TYPE An entry in the IPX Port Counters table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 | not-accessible | mandatory | |
| snIpxPortCountersPort OBJECT-TYPE The port index for port Counters entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 | PortIndex | read-only | mandatory |
| snIpxPortCountersRcvPktsCnt OBJECT-TYPE IPX incoming packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 | Counter | read-only | mandatory |
| snIpxPortCountersTxPktsCnt OBJECT-TYPE IPX Outgoing packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 | Counter | read-only | mandatory |
| snIpxPortCountersFwdPktsCnt OBJECT-TYPE IPX forwarding packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 | Counter | read-only | mandatory |
| snIpxPortCountersRcvDropPktsCnt OBJECT-TYPE IPX receiving drop packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5 | Counter | read-only | mandatory |
| snIpxPortCountersTxDropPktsCnt OBJECT-TYPE IPX transmitting drop packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6 | Counter | read-only | mandatory |
| snIpxPortCountersRcvFiltPktsCnt OBJECT-TYPE IPX receiving filter packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 | Counter | read-only | mandatory |
| snIpxPortCountersTxFiltPktsCnt OBJECT-TYPE IPX transmitting filter packets counter for the interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 | Counter | read-only | mandatory |