MIBs Depot

HP-SN-IP-VRRP-MIB

Registered at
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5
Namespace
hp
Source file
HP-SN-IP-VRRP-MIB
Digest
sha256:d0a84cc34f5c235868b7414c9d41958d2adacb6190ee0a0ec13a85eff3ccb765

Imports

FromSymbols
HP-SN-ROOT-MIBsnVrrp
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-SN-IP-VRRP-MIB
HP-SN-ROOT-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MacAddress
type

Objects

NameOIDSyntaxAccessStatus
snVrrpGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1
snVrrpGroupOperMode
OBJECT-TYPE
The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpIfStateChangeTrap
OBJECT-TYPE
Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpIfMaxNumVridPerIntf
OBJECT-TYPE
Indicates the maximum number of VRID per interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3INTEGERread-onlymandatory
snVrrpIfMaxNumVridPerSystem
OBJECT-TYPE
Indicates the maximum number of VRID per system.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4INTEGERread-onlymandatory
snVrrpClearVrrpStat
OBJECT-TYPE
Clear VRRP statistics command.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5INTEGER {normal(0), clear(1)}read-writemandatory
snVrrpGroupOperModeVrrpextended
OBJECT-TYPE
The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(1)...........activate VRRP extended
1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.6INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpIntf
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2
snVrrpIfTable
OBJECT-TYPE
The VRRP Interface Table describes the interfaces from the viewpoint of VRRP.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1not-accessibledeprecated
snVrrpIfEntry
OBJECT-TYPE
The VRRP Interface Entry describes one interface from the viewpoint of VRRP.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1not-accessibledeprecated
snVrrpIfPort
OBJECT-TYPE
The IP port of this VRRP interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1INTEGERread-onlydeprecated
snVrrpIfAuthType
OBJECT-TYPE
The authentication type of this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2INTEGER {noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)}read-writedeprecated
snVrrpIfAuthPassword
OBJECT-TYPE
The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3OCTET STRING (SIZE(0..8))read-writedeprecated
snVrrpIfRxHeaderErrCnts
OBJECT-TYPE
The received Header error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4Counterread-onlydeprecated
snVrrpIfRxAuthTypeErrCnts
OBJECT-TYPE
The received authentication type error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5Counterread-onlydeprecated
snVrrpIfRxAuthPwdMismatchErrCnts
OBJECT-TYPE
The received authentication password mismatched error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6Counterread-onlydeprecated
snVrrpIfRxVridErrCnts
OBJECT-TYPE
The received unfound VRID error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7Counterread-onlydeprecated
snVrrpVirRtr
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3
snVrrpVirRtrTable
OBJECT-TYPE
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1not-accessibledeprecated
snVrrpVirRtrEntry
OBJECT-TYPE
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1not-accessibledeprecated
snVrrpVirRtrPort
OBJECT-TYPE
The IP port of this VRRP interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1INTEGERread-onlydeprecated
snVrrpVirRtrId
OBJECT-TYPE
One of the virtual router ID of this VRRP interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2INTEGER (1..255)read-onlydeprecated
snVrrpVirRtrOwnership
OBJECT-TYPE
The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3INTEGER {incomplete(0), owner(1), backup(2)}read-writedeprecated
snVrrpVirRtrCfgPriority
OBJECT-TYPE
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4INTEGER (3..254)read-writedeprecated
snVrrpVirRtrTrackPriority
OBJECT-TYPE
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5INTEGER (1..254)read-writedeprecated
snVrrpVirRtrCurrPriority
OBJECT-TYPE
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6INTEGER (1..254)read-onlydeprecated
snVrrpVirRtrHelloInt
OBJECT-TYPE
Time interval between advertisements (seconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7INTEGER (1..84)read-writedeprecated
snVrrpVirRtrDeadInt
OBJECT-TYPE
Dead interval (seconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8INTEGER (1..84)read-writedeprecated
snVrrpVirRtrPreemptMode
OBJECT-TYPE
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9INTEGER {disabled(0), enabled(1)}read-writedeprecated
snVrrpVirRtrState
OBJECT-TYPE
This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10INTEGER {init(0), master(1), backup(2)}read-onlydeprecated
snVrrpVirRtrActivate
OBJECT-TYPE
This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11INTEGER {disabled(0), enabled(1)}read-writedeprecated
snVrrpVirRtrIpAddrMask
OBJECT-TYPE
The numbers of IP Addresses of this virtual router of this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12OCTET STRING (SIZE(64))read-writedeprecated
snVrrpVirRtrTrackPortMask
OBJECT-TYPE
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13OCTET STRING (SIZE(4..32))read-writedeprecated
snVrrpVirRtrTrackVifMask
OBJECT-TYPE
This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14OCTET STRING (SIZE(4..512))read-writedeprecated
snVrrpVirRtrRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writedeprecated
snVrrpVirRtrRxArpPktDropCnts
OBJECT-TYPE
The received VRRP ARP Packet Drop Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16Counterread-onlydeprecated
snVrrpVirRtrRxIpPktDropCnts
OBJECT-TYPE
The received VRRP IP Packet Drop Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17Counterread-onlydeprecated
snVrrpVirRtrRxPortMismatchCnts
OBJECT-TYPE
The received VRRP Port mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18Counterread-onlydeprecated
snVrrpVirRtrRxNumOfIpMismatchCnts
OBJECT-TYPE
The received VRRP Number of IP Addresses mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19Counterread-onlydeprecated
snVrrpVirRtrRxIpMismatchCnts
OBJECT-TYPE
The received VRRP IP Address mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20Counterread-onlydeprecated
snVrrpVirRtrRxHelloIntMismatchCnts
OBJECT-TYPE
The counts of the virtual router interface with hello interval mismatch counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21Counterread-onlydeprecated
snVrrpVirRtrRxPriorityZeroFromMasterCnts
OBJECT-TYPE
The counts of the virtual router interface with Priority zero from the master.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22Counterread-onlydeprecated
snVrrpVirRtrRxHigherPriorityCnts
OBJECT-TYPE
The counts of the virtual router interface with higher Priority.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23Counterread-onlydeprecated
snVrrpVirRtrTransToMasterStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to master state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24Counterread-onlydeprecated
snVrrpVirRtrTransToBackupStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to backup state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25Counterread-onlydeprecated
snVrrpVirRtrCurrDeadInt
OBJECT-TYPE
Current Dead interval (in 100 milliseconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26INTEGERread-onlydeprecated
snVrrpVirRtrTrackPortList
OBJECT-TYPE
This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27OCTET STRINGread-writedeprecated
snVrrpVirRtrTrackVifPortList
OBJECT-TYPE
This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28OCTET STRINGread-writedeprecated
snVrrpIntf2
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4
snVrrpIf2Table
OBJECT-TYPE
The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1not-accessiblemandatory
snVrrpIf2Entry
OBJECT-TYPE
The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1not-accessiblemandatory
snVrrpIf2AuthType
OBJECT-TYPE
The authentication type of this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.1INTEGER {noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)}read-writemandatory
snVrrpIf2AuthPassword
OBJECT-TYPE
The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.2OCTET STRING (SIZE(0..8))read-writemandatory
snVrrpIf2RxHeaderErrCnts
OBJECT-TYPE
The received Header error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.3Counterread-onlymandatory
snVrrpIf2RxAuthTypeErrCnts
OBJECT-TYPE
The received authentication type error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.4Counterread-onlymandatory
snVrrpIf2RxAuthPwdMismatchErrCnts
OBJECT-TYPE
The received authentication password mismatched error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.5Counterread-onlymandatory
snVrrpIf2RxVridErrCnts
OBJECT-TYPE
The received unfound VRID error counts in this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.6Counterread-onlymandatory
snVrrpVirRtr2
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5
snVrrpVirRtr2Table
OBJECT-TYPE
The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1not-accessiblemandatory
snVrrpVirRtr2Entry
OBJECT-TYPE
The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1not-accessiblemandatory
snVrrpVirRtr2Id
OBJECT-TYPE
One of the virtual router ID of this Vrrp and Vrrpe interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1INTEGER (1..255)read-onlymandatory
snVrrpVirRtr2Ownership
OBJECT-TYPE
The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2INTEGER {incomplete(0), owner(1), backup(2)}read-writemandatory
snVrrpVirRtr2CfgPriority
OBJECT-TYPE
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3INTEGER (0..255)read-writemandatory
snVrrpVirRtr2TrackPriority
OBJECT-TYPE
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4INTEGER (1..254)read-writemandatory
snVrrpVirRtr2CurrPriority
OBJECT-TYPE
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5INTEGER (1..254)read-onlymandatory
snVrrpVirRtr2HelloInt
OBJECT-TYPE
Time interval between advertisements (seconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6INTEGER (1..84)read-writemandatory
snVrrpVirRtr2DeadInt
OBJECT-TYPE
Dead interval (seconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7INTEGER (0..84)read-writemandatory
snVrrpVirRtr2PreemptMode
OBJECT-TYPE
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpVirRtr2State
OBJECT-TYPE
This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9INTEGER {init(0), master(1), backup(2)}read-onlymandatory
snVrrpVirRtr2IpAddrMask
OBJECT-TYPE
The numbers of IP Addresses of this virtual router of this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10OCTET STRING (SIZE(64))read-writemandatory
snVrrpVirRtr2Activate
OBJECT-TYPE
This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpVirRtr2BackupInt
OBJECT-TYPE
Time interval between backup routers hello message advertisements (seconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12INTEGER (60..3600)read-writemandatory
snVrrpVirRtr2RowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snVrrpVirRtr2RxArpPktDropCnts
OBJECT-TYPE
The received Vrrp and Vrrpe ARP Packet Drop Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14Counterread-onlymandatory
snVrrpVirRtr2RxIpPktDropCnts
OBJECT-TYPE
The received Vrrp and Vrrpe IP Packet Drop Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15Counterread-onlymandatory
snVrrpVirRtr2RxPortMismatchCnts
OBJECT-TYPE
The received Vrrp and Vrrpe Port mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16Counterread-onlymandatory
snVrrpVirRtr2RxNumOfIpMismatchCnts
OBJECT-TYPE
The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17Counterread-onlymandatory
snVrrpVirRtr2RxIpMismatchCnts
OBJECT-TYPE
The received Vrrp and Vrrpe IP Address mismatching Counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18Counterread-onlymandatory
snVrrpVirRtr2RxHelloIntMismatchCnts
OBJECT-TYPE
The counts of the virtual router interface with hello interval mismatch counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19Counterread-onlymandatory
snVrrpVirRtr2RxPriorityZeroFromMasterCnts
OBJECT-TYPE
The counts of the virtual router interface with Priority zero from the master.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20Counterread-onlymandatory
snVrrpVirRtr2RxHigherPriorityCnts
OBJECT-TYPE
The counts of the virtual router interface with higher Priority.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21Counterread-onlymandatory
snVrrpVirRtr2TransToMasterStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to master state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22Counterread-onlymandatory
snVrrpVirRtr2TransToBackupStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to backup state.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23Counterread-onlymandatory
snVrrpVirRtr2CurrDeadInt
OBJECT-TYPE
Current Dead interval (in 100 milliseconds).
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24INTEGERread-onlymandatory
snVrrpVirRtr2TrackPortList
OBJECT-TYPE
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25OCTET STRINGread-writemandatory
snVrrpVirRtr2AdvertiseBackup
OBJECT-TYPE
Set Advertise this backup router to master
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26INTEGER {disabled(0), enabled(1)}read-writemandatory
snVrrpVirRtr2MasterIpAddr
OBJECT-TYPE
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27IpAddressread-onlymandatory
snVrrpVirRtr2IpAddrCount
OBJECT-TYPE
The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28INTEGER (0..255)read-onlymandatory
snVrrpVirRtr2VirtualMacAddr
OBJECT-TYPE
The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.
1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29MacAddressread-onlymandatory