HP-SN-IP-MIB
- Registered at
- 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.3.6.1.4.1.11.2.3.7.11.12.2.2.91.3.6.1.4.1.11.2.3.7.11.12.2.2.101.3.6.1.4.1.11.2.3.7.11.12.2.3.11.3.6.1.4.1.11.2.3.7.11.12.2.5.11.3.6.1.4.1.11.2.3.7.11.12.2.7.11.3.6.1.4.1.11.2.3.7.11.12.2.7.21.3.6.1.4.1.11.2.3.7.11.12.2.8.11.3.6.1.4.1.11.2.3.7.11.12.2.9.11.3.6.1.4.1.11.2.3.7.11.12.2.12.11.3.6.1.4.1.11.2.3.7.11.12.2.12.21.3.6.1.4.1.11.2.3.7.11.12.2.12.3
- Namespace
- hp
- Source file
HP-SN-IP-MIB- Digest
sha256:3fe34d453ca909adb0c0405caea23bf99c54e31010ec1dec7b0dd1230c4993c1
Imports
| From | Symbols |
|---|---|
| HP-SN-ROOT-MIB | snDvmrp, snFsrp, snGblRt, snIp, snLoopbackIf, snPim, snRip, snVrrp |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HP-SN-IP-MIB HP-SN-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Action type | ||||
| ClearStatus type | ||||
| DisplayString type | ||||
| Metric type | ||||
| PhysAddress type | ||||
| PortIndex type | ||||
| PortMask type | ||||
| RowSts type | ||||
| RtrStatus type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| snRtIpGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1 | |||
| snRtClearArpCache OBJECT-TYPE clear(1) will clear arp cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1 | ClearStatus | read-write | mandatory |
| snRtClearIpCache OBJECT-TYPE clear(1) will clear ip route cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2 | ClearStatus | read-write | mandatory |
| snRtClearIpRoute OBJECT-TYPE clear(1) will clear ip route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.3 | ClearStatus | read-write | mandatory |
| snRtBootpServer OBJECT-TYPE IP address of bootp server to which bootp packet need to be relayed. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.4 | IpAddress | read-write | deprecated |
| snRtBootpRelayMax OBJECT-TYPE Maximum number of hop the bootp packet should travel. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.5 | INTEGER (1..15) | read-write | mandatory |
| snRtArpAge OBJECT-TYPE The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.6 | INTEGER (0..240) | read-write | mandatory |
| snRtIpIrdpEnable OBJECT-TYPE Perform router advertisement on this box. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.7 | RtrStatus | read-write | mandatory |
| snRtIpLoadShare OBJECT-TYPE If more than one route available, use them to share load. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.8 | RtrStatus | read-write | mandatory |
| snRtIpProxyArp OBJECT-TYPE Enable/disable proxy arp function in the box. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.9 | RtrStatus | read-write | mandatory |
| snRtIpRarp OBJECT-TYPE Enable/disable RARP server. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.10 | RtrStatus | read-write | mandatory |
| snRtIpTtl OBJECT-TYPE The time to live value to be used in IP header of IP packet generated by the box. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.11 | INTEGER (1..255) | read-write | mandatory |
| snRtIpSetAllPortConfig OBJECT-TYPE The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest of the rows in snRtIpPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip interface configuration table. The previous setting will be overwritten by the new one. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.12 | INTEGER | read-write | mandatory |
| snRtIpFwdCacheMaxEntries OBJECT-TYPE The maximum number of ip forwarding table entries. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.13 | INTEGER | read-only | mandatory |
| snRtIpFwdCacheCurEntries OBJECT-TYPE The current number of ip forwarding table entries. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.14 | INTEGER | read-only | mandatory |
| snRtIpMaxStaticRouteEntries OBJECT-TYPE The maximum number of static route entries in the static route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.15 | INTEGER | read-only | mandatory |
| snRtIpDirBcastFwd OBJECT-TYPE Enable/Disable directed broadcast forwarding. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.16 | RtrStatus | read-write | mandatory |
| snRtIpLoadShareNumOfPaths OBJECT-TYPE Number of routes are used to share load. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.17 | INTEGER | read-write | mandatory |
| snRtIpLoadShareMaxPaths OBJECT-TYPE Maximum number of routes can be configured to share load. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.18 | INTEGER | read-only | mandatory |
| snRtIpLoadShareMinPaths OBJECT-TYPE Minimum number of routes can be configured to share load. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.19 | INTEGER | read-only | mandatory |
| snRtIpProtocolRouterId OBJECT-TYPE Router Id for all IP Protocols. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.20 | IpAddress | read-write | mandatory |
| snRtIpSourceRoute OBJECT-TYPE Enable/Disable source routing support, ability to drop the source routing packets. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.21 | RtrStatus | read-write | mandatory |
| snRtIpStaticRouteTable OBJECT-TYPE IP static/default route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2 | not-accessible | mandatory | |
| snRtIpStaticRouteEntry OBJECT-TYPE An entry in the IP static route table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1 | not-accessible | mandatory | |
| snRtIpStaticRouteIndex OBJECT-TYPE The table index for a static route entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1 | INTEGER | read-only | mandatory |
| snRtIpStaticRouteDest OBJECT-TYPE Destination IP address. 0.0.0.0 for default route. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2 | IpAddress | read-write | mandatory |
| snRtIpStaticRouteMask OBJECT-TYPE Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3 | IpAddress | read-write | mandatory |
| snRtIpStaticRouteNextHop OBJECT-TYPE IP address of next hop router that is located on one of the directly attached IP subnet. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4 | IpAddress | read-write | mandatory |
| snRtIpStaticRouteMetric OBJECT-TYPE The metrics to next hop router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5 | INTEGER | read-write | mandatory |
| snRtIpStaticRouteRowStatus OBJECT-TYPE To create or delete a static route entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6 | RowSts | read-write | mandatory |
| snRtIpStaticRouteDistance OBJECT-TYPE Administration distance. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7 | INTEGER (1..255) | read-write | mandatory |
| snRtIpFilterTable OBJECT-TYPE IP filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 | not-accessible | mandatory | |
| snRtIpFilterEntry OBJECT-TYPE An entry in the IP filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1 | not-accessible | mandatory | |
| snRtIpFilterIndex OBJECT-TYPE The table index for a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1 | INTEGER | read-only | mandatory |
| snRtIpFilterAction OBJECT-TYPE Action to take if the ip packet match with this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2 | INTEGER {deny(0), permit(1), qosEnabled(2)} | read-write | mandatory |
| snRtIpFilterProtocol OBJECT-TYPE Transport protocol. 0 means don't care | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3 | INTEGER (0..255) | read-write | mandatory |
| snRtIpFilterSourceIp OBJECT-TYPE Source IP address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4 | IpAddress | read-write | mandatory |
| snRtIpFilterSourceMask OBJECT-TYPE Source IP subnet mask. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5 | IpAddress | read-write | mandatory |
| snRtIpFilterDestIp OBJECT-TYPE Destination IP address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6 | IpAddress | read-write | mandatory |
| snRtIpFilterDestMask OBJECT-TYPE Destination IP subnet mask. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7 | IpAddress | read-write | mandatory |
| snRtIpFilterOperator OBJECT-TYPE Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8 | INTEGER {greater(1), equal(2), less(3), notEqual(4)} | read-write | mandatory |
| snRtIpFilterOperand OBJECT-TYPE For now this only refers to transport protocol port number. 0 means NA | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9 | INTEGER (0..65535) | read-write | mandatory |
| snRtIpFilterRowStatus OBJECT-TYPE To create or delete a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10 | RowSts | read-write | mandatory |
| snRtIpFilterEstablished OBJECT-TYPE Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11 | RtrStatus | read-write | mandatory |
| snRtIpFilterQosPriority OBJECT-TYPE The router L4 Qos Priority values are: low(0) -- low prority high(1) -- high prority. The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12 | INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)} | read-write | mandatory |
| snRtIpRarpTable OBJECT-TYPE IP RARP table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4 | not-accessible | mandatory | |
| snRtIpRarpEntry OBJECT-TYPE An entry in the IP Rarp table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1 | not-accessible | mandatory | |
| snRtIpRarpIndex OBJECT-TYPE The table index for a Rarp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1 | INTEGER (1..16) | read-only | mandatory |
| snRtIpRarpMac OBJECT-TYPE The Mac address for a Rarp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2 | OCTET STRING (SIZE(6)) | read-write | mandatory |
| snRtIpRarpIp OBJECT-TYPE The IP address for a Rarp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3 | IpAddress | read-write | mandatory |
| snRtIpRarpRowStatus OBJECT-TYPE To create or delete a Rarp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4 | RowSts | read-write | mandatory |
| snRtStaticArpTable OBJECT-TYPE IP static arp table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5 | not-accessible | mandatory | |
| snRtStaticArpEntry OBJECT-TYPE An entry in the IP static arp table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1 | not-accessible | mandatory | |
| snRtStaticArpIndex OBJECT-TYPE The table index for a static arp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1 | INTEGER (1..16) | read-only | mandatory |
| snRtStaticArpIp OBJECT-TYPE The IP address for a static arp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2 | IpAddress | read-write | mandatory |
| snRtStaticArpMac OBJECT-TYPE The Mac address for a static arp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3 | OCTET STRING (SIZE(6)) | read-write | mandatory |
| snRtStaticArpPort OBJECT-TYPE The port index for a static arp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4 | PortIndex | read-write | mandatory |
| snRtStaticArpRowStatus OBJECT-TYPE To create or delete a Static Arp entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5 | RowSts | read-write | mandatory |
| snRtIpPortAddrTable OBJECT-TYPE IP port address table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6 | not-accessible | mandatory | |
| snRtIpPortAddrEntry OBJECT-TYPE An entry in the IP Port Address table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1 | not-accessible | mandatory | |
| snRtIpPortAddrPortIndex OBJECT-TYPE The port index for port address entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1 | PortIndex | read-only | mandatory |
| snRtIpPortAddress OBJECT-TYPE The port IP address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2 | IpAddress | read-only | mandatory |
| snRtIpPortSubnetMask OBJECT-TYPE The port IP address subnet mask. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3 | IpAddress | read-write | mandatory |
| snRtIpPortAddrType OBJECT-TYPE The port IP address type. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4 | INTEGER {primary(1), secondary(2)} | read-write | mandatory |
| snRtIpPortRowStatus OBJECT-TYPE To create or delete a port address entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5 | RowSts | read-write | mandatory |
| snRtIpPortAccessTable OBJECT-TYPE IP port access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7 | not-accessible | mandatory | |
| snRtIpPortAccessEntry OBJECT-TYPE An entry in the IP Port access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1 | not-accessible | mandatory | |
| snRtIpPortAccessPortIndex OBJECT-TYPE The port index for port access entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1 | PortIndex | read-only | mandatory |
| snRtIpPortAccessDirection OBJECT-TYPE The incoming or outgoing check for port access. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2 | INTEGER {in(1), out(2)} | read-only | mandatory |
| snRtIpPortAccessFilters OBJECT-TYPE 1st octet correspond to 1st filter number and so on. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3 | OCTET STRING | read-write | mandatory |
| snRtIpPortAccessRowStatus OBJECT-TYPE To create or delete a port access entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4 | RowSts | read-write | mandatory |
| snRtIpPortConfigTable OBJECT-TYPE IP port Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8 | not-accessible | mandatory | |
| snRtIpPortConfigEntry OBJECT-TYPE An entry in the IP Port Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1 | not-accessible | mandatory | |
| snRtIpPortConfigPortIndex OBJECT-TYPE The port index for port config entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1 | PortIndex | read-only | mandatory |
| snRtIpPortMtu OBJECT-TYPE The maximun transfer unit. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2 | INTEGER (576..4470) | read-write | mandatory |
| snRtIpPortEncap OBJECT-TYPE Data link encapsulation to be used on the IP frame transmitted on the port. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3 | INTEGER {ethernet(1), snap(2), hdlc(3), ppp(4)} | read-write | mandatory |
| snRtIpPortMetric OBJECT-TYPE The metric. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4 | INTEGER (1..15) | read-write | mandatory |
| snRtIpPortDirBcastFwd OBJECT-TYPE Enable/Disable directed broadcast forwarding on the port. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5 | RtrStatus | read-write | mandatory |
| snRtBcastFwd OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9 | |||
| snRtBcastFwdGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1 | |||
| snRtUdpBcastFwdEnable OBJECT-TYPE Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port table. When it is disabled, UDP broadcast forwarding port table is flushed to empty. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1.1 | RtrStatus | read-write | mandatory |
| snRtUdpBcastFwdPort OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2 | |||
| snRtUdpBcastFwdPortTable OBJECT-TYPE This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1 | not-accessible | mandatory | |
| snRtUdpBcastFwdPortEntry OBJECT-TYPE An entry of the UDP broadcast forwarding port table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1 | not-accessible | mandatory | |
| snRtUdpBcastFwdPortIndex OBJECT-TYPE The table index for a UDP broadcast forwarding port entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1 | INTEGER (1..20) | read-only | mandatory |
| snRtUdpBcastFwdPortNumber OBJECT-TYPE UDP port number for which UDP broadcast forwarding is enabled. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2 | INTEGER (1..65535) | read-write | mandatory |
| snRtUdpBcastFwdPortRowStatus OBJECT-TYPE To create or delete a UDP broadcast forwarding port entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3 | RowSts | read-write | mandatory |
| snRtUdpHelper OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3 | |||
| snRtUdpHelperTable OBJECT-TYPE UDP helper table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1 | not-accessible | mandatory | |
| snRtUdpHelperEntry OBJECT-TYPE An entry of the UDP helper table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1 | not-accessible | mandatory | |
| snRtUdpHelperPortIndex OBJECT-TYPE The port index for a UDP helper entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1 | PortIndex | read-only | mandatory |
| snRtUdpHelperIndex OBJECT-TYPE The table index for a UDP helper entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2 | INTEGER (1..4) | read-only | mandatory |
| snRtUdpHelperAddr OBJECT-TYPE The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.255.255.255 or 0.0.0.0. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3 | IpAddress | read-write | mandatory |
| snRtUdpHelperRowStatus OBJECT-TYPE To create or delete a UDP helper entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4 | RowSts | read-write | mandatory |
| snRtIpTraceRoute OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10 | |||
| snRtIpTraceRouteGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1 | |||
| snRtIpTraceRouteTargetAddr OBJECT-TYPE Target IP address of which trace route is performed. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1 | IpAddress | read-write | mandatory |
| snRtIpTraceRouteMinTtl OBJECT-TYPE Minimum TTL value carried in the first probe packet. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2 | INTEGER (1..255) | read-write | mandatory |
| snRtIpTraceRouteMaxTtl OBJECT-TYPE Maximum TTL value carried in the last probe packet. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3 | INTEGER (1..255) | read-write | mandatory |
| snRtIpTraceRouteTimeOut OBJECT-TYPE Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4 | INTEGER (1..120) | read-write | mandatory |
| snRtIpTraceRouteControl OBJECT-TYPE Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5 | INTEGER {start(1), abort(2), success(3), failure(4), inProgress(5)} | read-write | mandatory |
| snRtIpTraceRouteResult OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2 | |||
| snRtIpTraceRouteResultTable OBJECT-TYPE Trace route result table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 | not-accessible | mandatory | |
| snRtIpTraceRouteResultEntry OBJECT-TYPE An entry of the trace route result table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1 | not-accessible | mandatory | |
| snRtIpTraceRouteResultIndex OBJECT-TYPE The table index for a trace route result entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1 | INTEGER | read-only | mandatory |
| snRtIpTraceRouteResultAddr OBJECT-TYPE The router or the target address of which forms part of the route to reach the destination address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2 | IpAddress | read-only | mandatory |
| snRtIpTraceRouteResultRoundTripTime1 OBJECT-TYPE The round trip time between the first probe packet transmitted and the reponse ICMP packet received. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3 | TimeTicks | read-only | mandatory |
| snRtIpTraceRouteResultRoundTripTime2 OBJECT-TYPE The round trip time between the second probe packet transmitted and the reponse ICMP packet received. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4 | TimeTicks | read-only | mandatory |
| snRtIpFwdCacheTable OBJECT-TYPE IP forwarding cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11 | not-accessible | mandatory | |
| snRtIpFwdCacheEntry OBJECT-TYPE An entry in the IP forwarding cache table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1 | not-accessible | mandatory | |
| snRtIpFwdCacheIndex OBJECT-TYPE The table index for a ip forwarding cache table entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1 | INTEGER | read-only | mandatory |
| snRtIpFwdCacheIp OBJECT-TYPE The IP address of a station. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2 | IpAddress | read-only | mandatory |
| snRtIpFwdCacheMac OBJECT-TYPE The Mac address of an IP station. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| snRtIpFwdCacheNextHopIp OBJECT-TYPE The next hop router IP address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4 | IpAddress | read-only | mandatory |
| snRtIpFwdCacheOutgoingPort OBJECT-TYPE The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the following meanings: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5 | INTEGER (0..3900) | read-only | mandatory |
| snRtIpFwdCacheType OBJECT-TYPE The 'dynamic' or 'permanent' type for a ip forwarding cache table entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6 | INTEGER {dynamic(1), permanent(2)} | read-only | mandatory |
| snRtIpFwdCacheAction OBJECT-TYPE The action to take. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7 | INTEGER {other(1), forward(2), forUs(3), waitForArp(4), complexFilter(5), icmpDeny(6), dropPacket(7)} | read-only | mandatory |
| snRtIpFwdCacheFragCheck OBJECT-TYPE Check for fragmentation. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8 | INTEGER {disabled(0), enabled(1)} | read-only | mandatory |
| snRtIpFwdCacheSnapHdr OBJECT-TYPE Apply SNAP encapsulation. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9 | INTEGER {disabled(0), enabled(1)} | read-only | mandatory |
| snRtIpFwdCacheVLanId OBJECT-TYPE The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10 | INTEGER | read-only | mandatory |
| snRtIpRipGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1 | |||
| snRtIpRipEnable OBJECT-TYPE Enable/disable ip rip routing. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1 | RtrStatus | read-write | mandatory |
| snRtIpRipUpdateTime OBJECT-TYPE Ip rip update interval in seconds. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2 | INTEGER (1..1000) | read-write | mandatory |
| snRtIpRipRedisEnable OBJECT-TYPE Enable/disable redistribution to rip. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3 | RtrStatus | read-write | mandatory |
| snRtIpRipRedisDefMetric OBJECT-TYPE Default metric to be used when redistribute route to rip. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4 | INTEGER (1..15) | read-write | mandatory |
| snRtIpRipSetAllPortConfig OBJECT-TYPE The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpRipPortVersion and snRtIpRipPortPoisonReverse) to the rest of the rows in snRtIpRipPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip rip port configuration table. The previous setting will be overwritten by the new one. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5 | INTEGER | read-write | mandatory |
| snRtIpRipGblFiltList OBJECT-TYPE An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6 | OCTET STRING (SIZE(1..64)) | read-write | mandatory |
| snRtIpRipFiltOnAllPort OBJECT-TYPE Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately. The following values can be returned on reads: valid(1)....set operation is done and is valid. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.7 | INTEGER {valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)} | read-write | mandatory |
| snRtIpRipDistance OBJECT-TYPE Administration distance. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8 | INTEGER (1..255) | read-write | mandatory |
| snRtIpRipPortConfigTable OBJECT-TYPE IP Rip port Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2 | not-accessible | mandatory | |
| snRtIpRipPortConfigEntry OBJECT-TYPE An entry in the IP Rip Port Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1 | not-accessible | mandatory | |
| snRtIpRipPortConfigPortIndex OBJECT-TYPE The port index for ip rip port config entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1 | PortIndex | read-only | mandatory |
| snRtIpRipPortVersion OBJECT-TYPE The ip rip version on this port. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2 | INTEGER {disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3)} | read-write | mandatory |
| snRtIpRipPortPoisonReverse OBJECT-TYPE Enable/disable poison reverse. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3 | RtrStatus | read-write | mandatory |
| snRtIpRipPortLearnDefault OBJECT-TYPE Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enabled(1)....enabled the learn default option. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snRtIpRipRedisTable OBJECT-TYPE IP Rip Redistribution table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3 | not-accessible | mandatory | |
| snRtIpRipRedisEntry OBJECT-TYPE An entry in the IP Rip Redistribution table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1 | not-accessible | mandatory | |
| snRtIpRipRedisIndex OBJECT-TYPE The table index for a IP Rip Redistribution entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1 | INTEGER (1..64) | read-only | mandatory |
| snRtIpRipRedisAction OBJECT-TYPE The action to take when match this IP Rip Redistribution entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2 | Action | read-write | mandatory |
| snRtIpRipRedisProtocol OBJECT-TYPE The protocol to be distributed. other(1) cannot be used for SNMP-SET. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3 | INTEGER {other(1), all(2), static(3), ospf(4), bgp(5)} | read-write | mandatory |
| snRtIpRipRedisIp OBJECT-TYPE The ip address of the ip route to be distributed. 0.0.0.0 - all routes | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4 | IpAddress | read-write | mandatory |
| snRtIpRipRedisMask OBJECT-TYPE The ip subnet mask of the ip route to be distributed. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5 | IpAddress | read-write | mandatory |
| snRtIpRipRedisMatchMetric OBJECT-TYPE The metric of the route to be matched to determine the redistribution. 0 - any metric value | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6 | Metric | read-write | mandatory |
| snRtIpRipRedisSetMetric OBJECT-TYPE The new metric of the route to be advertised. 0 - use the default metric. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7 | INTEGER (0..15) | read-write | mandatory |
| snRtIpRipRedisRowStatus OBJECT-TYPE To create or delete a Redistribution entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8 | RowSts | read-write | mandatory |
| snRtIpRipRouteFilterTable OBJECT-TYPE ip rip route filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4 | not-accessible | mandatory | |
| snRtIpRipRouteFilterEntry OBJECT-TYPE An entry of the ip rip route filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1 | not-accessible | mandatory | |
| snRtIpRipRouteFilterId OBJECT-TYPE The filter ID to identify a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1 | INTEGER (1..64) | read-only | mandatory |
| snRtIpRipRouteFilterAction OBJECT-TYPE Action to take if the ip rip packet matched with this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2 | Action | read-write | mandatory |
| snRtIpRipRouteFilterIpAddr OBJECT-TYPE Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip packets. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3 | IpAddress | read-write | mandatory |
| snRtIpRipRouteFilterSubnetMask OBJECT-TYPE Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask value is ignored. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4 | IpAddress | read-write | mandatory |
| snRtIpRipRouteFilterRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snRtIpRipNbrFilterTable OBJECT-TYPE ip rip neighbor filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5 | not-accessible | mandatory | |
| snRtIpRipNbrFilterEntry OBJECT-TYPE An entry of the ip rip neighbor filter table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1 | not-accessible | mandatory | |
| snRtIpRipNbrFilterId OBJECT-TYPE The filter ID to identify a filter entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1 | INTEGER (1..64) | read-only | mandatory |
| snRtIpRipNbrFilterAction OBJECT-TYPE Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2 | Action | read-write | mandatory |
| snRtIpRipNbrFilterSourceIp OBJECT-TYPE Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip packets. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3 | IpAddress | read-write | mandatory |
| snRtIpRipNbrFilterRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snRtIpRipPortAccessTable OBJECT-TYPE ip interface rip access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6 | not-accessible | mandatory | |
| snRtIpRipPortAccessEntry OBJECT-TYPE An entry of the ip interface rip access table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1 | not-accessible | mandatory | |
| snRtIpRipPortAccessPort OBJECT-TYPE The ip interface to which the rip filter applies. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1 | PortIndex | read-only | mandatory |
| snRtIpRipPortAccessDir OBJECT-TYPE The access direction of incoming packet filter or outgoing packet filter. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2 | INTEGER {in(1), out(2)} | read-only | mandatory |
| snRtIpRipPortAccessFilterList OBJECT-TYPE An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized. | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3 | OCTET STRING (SIZE(1..64)) | read-write | mandatory |
| snRtIpRipPortAccessRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snDvmrpMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1 | |||
| snDvmrpVersion OBJECT-TYPE The router's DVMRP version information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.1 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| snDvmrpEnable OBJECT-TYPE Enable or disable DVMRP on this router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.2 | RtrStatus | read-write | mandatory |
| snDvmrpGenerationId OBJECT-TYPE The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.3 | INTEGER | read-only | mandatory |
| snDvmrpProbeInterval OBJECT-TYPE This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.4 | INTEGER (5..30) | read-write | mandatory |
| snDvmrpReportInterval OBJECT-TYPE This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.5 | INTEGER (10..2000) | read-write | mandatory |
| snDvmrpTriggerInterval OBJECT-TYPE This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.6 | INTEGER (5..30) | read-write | mandatory |
| snDvmrpNeighborRouterTimeout OBJECT-TYPE This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.7 | INTEGER (60..8000) | read-write | mandatory |
| snDvmrpRouteExpireTime OBJECT-TYPE This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.8 | INTEGER (20..4000) | read-write | mandatory |
| snDvmrpRouteDiscardTime OBJECT-TYPE This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.9 | INTEGER (40..8000) | read-write | mandatory |
| snDvmrpPruneAge OBJECT-TYPE This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.10 | INTEGER (20..3600) | read-write | mandatory |
| snDvmrpGraftRetransmitTime OBJECT-TYPE This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.11 | INTEGER (5..3600) | read-write | mandatory |
| snDvmrpDefaultRoute OBJECT-TYPE This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 | IpAddress | read-write | mandatory |
| snDvmrpVInterfaceTable OBJECT-TYPE The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13 | not-accessible | mandatory | |
| snDvmrpVInterfaceEntry OBJECT-TYPE An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1 | not-accessible | mandatory | |
| snDvmrpVInterfaceVifIndex OBJECT-TYPE The ifIndex value of this DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1 | INTEGER (1..48) | read-only | mandatory |
| snDvmrpVInterfaceType OBJECT-TYPE The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are not a querier. For write operation, this object can only accept tunnel(1) to configure a tunnel interface or subnet(3) to configure a physical interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2 | INTEGER {tunnel(1), querier(2), subnet(3)} | read-write | mandatory |
| snDvmrpVInterfaceOperState OBJECT-TYPE The current operational state of this DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3 | INTEGER {up(1), down(2)} | read-only | mandatory |
| snDvmrpVInterfaceLocalAddress OBJECT-TYPE The IP address of the local end of this DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4 | IpAddress | read-write | mandatory |
| snDvmrpVInterfaceRemoteAddress OBJECT-TYPE The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the subnet address. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5 | IpAddress | read-write | mandatory |
| snDvmrpVInterfaceRemoteSubnetMask OBJECT-TYPE The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6 | IpAddress | read-only | mandatory |
| snDvmrpVInterfaceMetric OBJECT-TYPE The distance metric for this DVMRP virtual interface which is used to calculate distance vectors. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7 | INTEGER (1..31) | read-write | mandatory |
| snDvmrpVInterfaceTtlThreshold OBJECT-TYPE This is the minimum time-to-live value to forward the packets out of this virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8 | INTEGER (1..254) | read-write | mandatory |
| snDvmrpVInterfaceAdvertiseLocal OBJECT-TYPE Enable or disable the advertising of this local route. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9 | RtrStatus | read-write | mandatory |
| snDvmrpVInterfaceEncapsulation OBJECT-TYPE Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10 | RtrStatus | read-write | mandatory |
| snDvmrpVInterfaceStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snDvmrpNeighborTable OBJECT-TYPE The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14 | not-accessible | mandatory | |
| snDvmrpNeighborEntry OBJECT-TYPE An entry (conceptual row) in the snDvmrpNeighborTable. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1 | not-accessible | mandatory | |
| snDvmrpNeighborEntryIndex OBJECT-TYPE The table entry index. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1 | INTEGER | read-only | mandatory |
| snDvmrpNeighborVifIndex OBJECT-TYPE The value of VifIndex for the virtual interface used to reach this DVMRP neighbor. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2 | INTEGER | read-only | mandatory |
| snDvmrpNeighborAddress OBJECT-TYPE The IP address of the DVMRP neighbor for which this entry contains information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3 | IpAddress | read-only | mandatory |
| snDvmrpNeighborUpTime OBJECT-TYPE The time since this DVMRP neighbor (last) became a neighbor of the local router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4 | TimeTicks | read-only | mandatory |
| snDvmrpNeighborExpiryTime OBJECT-TYPE The minimum time remaining before this DVMRP neighbor will be aged out. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5 | TimeTicks | read-only | mandatory |
| snDvmrpNeighborGenerationId OBJECT-TYPE The neighboring router's generation identifier. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6 | INTEGER | read-only | mandatory |
| snDvmrpNeighborMajorVersion OBJECT-TYPE The neighboring router's major DVMRP version number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7 | INTEGER (0..255) | read-only | mandatory |
| snDvmrpNeighborMinorVersion OBJECT-TYPE The neighboring router's minor DVMRP version number. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8 | INTEGER (0..255) | read-only | mandatory |
| snDvmrpNeighborCapabilities OBJECT-TYPE This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning ----------- ------ 3 mtrace bit 2 generationID bit 1 prune bit 0 leaf bit The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9 | INTEGER | read-only | mandatory |
| snDvmrpRouteTable OBJECT-TYPE The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15 | not-accessible | mandatory | |
| snDvmrpRouteEntry OBJECT-TYPE An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1 | not-accessible | mandatory | |
| snDvmrpRouteEntryIndex OBJECT-TYPE The table entry index. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1 | INTEGER | read-only | mandatory |
| snDvmrpRouteSource OBJECT-TYPE The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2 | IpAddress | read-only | mandatory |
| snDvmrpRouteSourceMask OBJECT-TYPE The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3 | IpAddress | read-only | mandatory |
| snDvmrpRouteUpstreamNeighbor OBJECT-TYPE The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4 | IpAddress | read-only | mandatory |
| snDvmrpRouteVifIndex OBJECT-TYPE The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5 | INTEGER | read-only | mandatory |
| snDvmrpRouteMetric OBJECT-TYPE The distance in hops to the source subnet. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6 | INTEGER | read-only | mandatory |
| snDvmrpRouteExpiryTime OBJECT-TYPE The minimum amount of time remaining before this entry will be aged out. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7 | TimeTicks | read-only | mandatory |
| snDvmrpRouteNextHopTable OBJECT-TYPE The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16 | not-accessible | mandatory | |
| snDvmrpRouteNextHopEntry OBJECT-TYPE An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1 | not-accessible | mandatory | |
| snDvmrpRouteNextHopSource OBJECT-TYPE The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1 | IpAddress | read-only | mandatory |
| snDvmrpRouteNextHopSourceMask OBJECT-TYPE The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2 | IpAddress | read-only | mandatory |
| snDvmrpRouteNextHopVifIndex OBJECT-TYPE The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3 | INTEGER | read-only | mandatory |
| snDvmrpRouteNextHopType OBJECT-TYPE Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4 | INTEGER {leaf(1), branch(2)} | read-only | mandatory |
| snDvmrpVIfStatTable OBJECT-TYPE The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17 | not-accessible | mandatory | |
| snDvmrpVIfStatEntry OBJECT-TYPE An entry (conceptual row) in the snDvmrpVIfStatTable. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1 | not-accessible | mandatory | |
| snDvmrpVIfStatVifIndex OBJECT-TYPE The ifIndex value of this DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1 | INTEGER (1..65535) | read-only | mandatory |
| snDvmrpVIfStatInPkts OBJECT-TYPE The number of packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutPkts OBJECT-TYPE The number of packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3 | Counter | read-only | mandatory |
| snDvmrpVIfStatInOctets OBJECT-TYPE The number of octets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutOctets OBJECT-TYPE The number of octets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5 | Counter | read-only | mandatory |
| snDvmrpVIfStatInProbePkts OBJECT-TYPE The number of probe packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutProbePkts OBJECT-TYPE The number of probe packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7 | Counter | read-only | mandatory |
| snDvmrpVIfStatDiscardProbePkts OBJECT-TYPE The number of probe packets that have been discarded by the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8 | Counter | read-only | mandatory |
| snDvmrpVIfStatInRtUpdatePkts OBJECT-TYPE The number of route update packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutRtUpdatePkts OBJECT-TYPE The number of route update packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10 | Counter | read-only | mandatory |
| snDvmrpVIfStatDiscardRtUpdatePkts OBJECT-TYPE The number of route update packets that have been discarded by the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11 | Counter | read-only | mandatory |
| snDvmrpVIfStatInGraftPkts OBJECT-TYPE The number of graft packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutGraftPkts OBJECT-TYPE The number of graft packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13 | Counter | read-only | mandatory |
| snDvmrpVIfStatDiscardGraftPkts OBJECT-TYPE The number of graft packets that have been discarded by the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14 | Counter | read-only | mandatory |
| snDvmrpVIfStatInGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16 | Counter | read-only | mandatory |
| snDvmrpVIfStatDiscardGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17 | Counter | read-only | mandatory |
| snDvmrpVIfStatInPrunePkts OBJECT-TYPE The number of prune packets that have arrived on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18 | Counter | read-only | mandatory |
| snDvmrpVIfStatOutPrunePkts OBJECT-TYPE The number of prune packets that have been sent on the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19 | Counter | read-only | mandatory |
| snDvmrpVIfStatDiscardPrunePkts OBJECT-TYPE The number of prune packets that have been discarded by the DVMRP virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20 | Counter | read-only | mandatory |
| snFsrpGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1 | |||
| snFsrpGroupOperMode OBJECT-TYPE The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activate FSRP | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.1 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snFsrpIfStateChangeTrap OBJECT-TYPE Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.2 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snFsrpIntf OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2 | |||
| snFsrpIfTable OBJECT-TYPE The FSRP Interface Table describes the interfaces from the viewpoint of FSRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1 | not-accessible | mandatory | |
| snFsrpIfEntry OBJECT-TYPE The FSRP Interface Entry describes one interface from the viewpoint of FSRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1 | not-accessible | mandatory | |
| snFsrpIfPort OBJECT-TYPE The physical router port of this FSRP interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1 | INTEGER | read-only | mandatory |
| snFsrpIfIpAddress OBJECT-TYPE The IP Address of the physical router port of this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2 | IpAddress | read-only | mandatory |
| snFsrpIfVirRtrIpAddr OBJECT-TYPE The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3 | IpAddress | read-write | mandatory |
| snFsrpIfOtherRtrIpAddr OBJECT-TYPE The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be configured for FSRP to work correctly | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4 | IpAddress | read-write | mandatory |
| snFsrpIfPreferLevel OBJECT-TYPE The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher priority selected to becomes the Active Router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5 | INTEGER (1..255) | read-write | mandatory |
| snFsrpIfTrackPortMask OBJECT-TYPE This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product) | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6 | PortMask | read-write | mandatory |
| snFsrpIfRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snFsrpIfState OBJECT-TYPE This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. active(3)...active state. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8 | INTEGER {init(0), negotiating(1), standby(2), active(3)} | read-only | mandatory |
| snFsrpIfKeepAliveTime OBJECT-TYPE The heart-beat is from 1 to 120 seconds. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9 | INTEGER (1..120) | read-write | mandatory |
| snFsrpIfRouterDeadTime OBJECT-TYPE The hold time of the Fsrp router is from 3 to 255 seconds. | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10 | INTEGER (3..255) | read-write | mandatory |
| snFsrpIfChassisTrackPortMask OBJECT-TYPE This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership | 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11 | OCTET STRING (SIZE(32)) | read-write | mandatory |
| snGblRtGeneral OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1 | |||
| snGblRtRouteOnly OBJECT-TYPE If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If route cannot perform, it will switch packets. | 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1.1 | RtrStatus | read-write | mandatory |
| snPimMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1 | |||
| snPimEnable OBJECT-TYPE Enable or disable PIM on this router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.1 | RtrStatus | read-write | mandatory |
| snPimNeighborRouterTimeout OBJECT-TYPE This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.2 | INTEGER (60..8000) | read-write | mandatory |
| snPimHelloTime OBJECT-TYPE This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbouring router. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.3 | INTEGER (10..3600) | read-write | mandatory |
| snPimPruneTime OBJECT-TYPE This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.4 | INTEGER (10..3600) | read-write | mandatory |
| snPimGraftRetransmitTime OBJECT-TYPE This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.5 | INTEGER (10..3600) | read-write | mandatory |
| snPimInactivityTime OBJECT-TYPE This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.6 | INTEGER (10..3600) | read-write | mandatory |
| snPimVInterfaceTable OBJECT-TYPE The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7 | not-accessible | mandatory | |
| snPimVInterfaceEntry OBJECT-TYPE An entry (conceptual row) in the snPimVInterfaceTable. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1 | not-accessible | mandatory | |
| snPimVInterfaceVifIndex OBJECT-TYPE The ifIndex value of this PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1 | INTEGER (1..48) | read-only | mandatory |
| snPimVInterfaceType OBJECT-TYPE The type of PIM virtual interface, whether it uses a tunnel or a physical interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2 | INTEGER {tunnel(1), subnet(2)} | read-write | mandatory |
| snPimVInterfaceLocalAddress OBJECT-TYPE The IP address of the local end of this PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3 | IpAddress | read-write | mandatory |
| snPimVInterfaceLocalSubnetMask OBJECT-TYPE The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4 | IpAddress | read-only | mandatory |
| snPimVInterfaceRemoteAddress OBJECT-TYPE The IP address of the remote end of this PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5 | IpAddress | read-write | mandatory |
| snPimVInterfaceDR OBJECT-TYPE The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6 | IpAddress | read-only | mandatory |
| snPimVInterfaceTtlThreshold OBJECT-TYPE This is the minimum time-to-live value to forward the packets out of this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7 | INTEGER (1..31) | read-write | mandatory |
| snPimVInterfaceStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snPimNeighborTable OBJECT-TYPE The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8 | not-accessible | mandatory | |
| snPimNeighborEntry OBJECT-TYPE An entry (conceptual row) in the snPimNeighborTable. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1 | not-accessible | mandatory | |
| snPimNeighborEntryIndex OBJECT-TYPE The table entry index. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1 | INTEGER | read-only | mandatory |
| snPimNeighborVifIndex OBJECT-TYPE The value of VifIndex for the virtual interface used to reach this PIM neighbor. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2 | INTEGER | read-only | mandatory |
| snPimNeighborAddress OBJECT-TYPE The IP address of the PIM neighbor for which this entry contains information. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3 | IpAddress | read-only | mandatory |
| snPimNeighborUpTime OBJECT-TYPE The time since this PIM neighbor (last) became a neighbor of the local router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4 | TimeTicks | read-only | mandatory |
| snPimNeighborExpiryTime OBJECT-TYPE The minimum time remaining before this PIM neighbor will be aged out. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5 | TimeTicks | read-only | mandatory |
| snPimVIfStatTable OBJECT-TYPE The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9 | not-accessible | mandatory | |
| snPimVIfStatEntry OBJECT-TYPE An entry (conceptual row) in the snPimVIfStatTable. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1 | not-accessible | mandatory | |
| snPimVIfStatVifIndex OBJECT-TYPE The ifIndex value of this PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1 | INTEGER (1..32) | read-only | mandatory |
| snPimVIfStatInJoinPkts OBJECT-TYPE The number of join packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2 | Counter | read-only | mandatory |
| snPimVIfStatOutJoinPkts OBJECT-TYPE The number of join packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3 | Counter | read-only | mandatory |
| snPimVIfStatDiscardJoinPkts OBJECT-TYPE The number of join packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4 | Counter | read-only | mandatory |
| snPimVIfStatInPrunePkts OBJECT-TYPE The number of prune packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5 | Counter | read-only | mandatory |
| snPimVIfStatOutPrunePkts OBJECT-TYPE The number of prune packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6 | Counter | read-only | mandatory |
| snPimVIfStatDiscardPrunePkts OBJECT-TYPE The number of prune packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7 | Counter | read-only | mandatory |
| snPimVIfStatInAssertPkts OBJECT-TYPE The number of assert packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8 | Counter | read-only | mandatory |
| snPimVIfStatOutAssertPkts OBJECT-TYPE The number of assert packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9 | Counter | read-only | mandatory |
| snPimVIfStatDiscardAssertPkts OBJECT-TYPE The number of assert packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10 | Counter | read-only | mandatory |
| snPimVIfStatInHelloPkts OBJECT-TYPE The number of hello packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11 | Counter | read-only | mandatory |
| snPimVIfStatOutHelloPkts OBJECT-TYPE The number of hello packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12 | Counter | read-only | mandatory |
| snPimVIfStatDiscardHelloPkts OBJECT-TYPE The number of hello packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13 | Counter | read-only | mandatory |
| snPimVIfStatInGraftPkts OBJECT-TYPE The number of graft packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14 | Counter | read-only | mandatory |
| snPimVIfStatOutGraftPkts OBJECT-TYPE The number of graft packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15 | Counter | read-only | mandatory |
| snPimVIfStatDiscardGraftPkts OBJECT-TYPE The number of graft packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16 | Counter | read-only | mandatory |
| snPimVIfStatInGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have arrived on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17 | Counter | read-only | mandatory |
| snPimVIfStatOutGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have been sent on the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18 | Counter | read-only | mandatory |
| snPimVIfStatDiscardGraftAckPkts OBJECT-TYPE The number of graft acknowledge packets that have been discarded by the PIM virtual interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19 | Counter | read-only | mandatory |
| snVrrpGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1 | |||
| snVrrpGroupOperMode OBJECT-TYPE The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snVrrpIfStateChangeTrap OBJECT-TYPE Indicates whether the SNMP agent process is permitted to generate VRRP interface state change traps. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snVrrpIfMaxNumVridPerIntf OBJECT-TYPE Indicates the maximum number of VRID per interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3 | INTEGER | read-only | mandatory |
| snVrrpIfMaxNumVridPerSystem OBJECT-TYPE Indicates the maximum number of VRID per system. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4 | INTEGER | read-only | mandatory |
| snVrrpClearVrrpStat OBJECT-TYPE Clear VRRP statistics command. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5 | INTEGER {normal(0), clear(1)} | read-write | mandatory |
| snVrrpIntf OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2 | |||
| snVrrpIfTable OBJECT-TYPE The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1 | not-accessible | mandatory | |
| snVrrpIfEntry OBJECT-TYPE The VRRP Interface Entry describes one interface from the viewpoint of VRRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1 | not-accessible | mandatory | |
| snVrrpIfPort OBJECT-TYPE The IP port of this VRRP interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1 | INTEGER | read-only | mandatory |
| snVrrpIfAuthType OBJECT-TYPE The authentication type of this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2 | INTEGER {noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)} | read-write | mandatory |
| snVrrpIfAuthPassword OBJECT-TYPE The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3 | OCTET STRING (SIZE(0..8)) | read-write | mandatory |
| snVrrpIfRxHeaderErrCnts OBJECT-TYPE The received Header error counts in this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4 | Counter | read-only | mandatory |
| snVrrpIfRxAuthTypeErrCnts OBJECT-TYPE The received authentication type error counts in this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5 | Counter | read-only | mandatory |
| snVrrpIfRxAuthPwdMismatchErrCnts OBJECT-TYPE The received authentication password mismatched error counts in this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6 | Counter | read-only | mandatory |
| snVrrpIfRxVridErrCnts OBJECT-TYPE The received unfound VRID error counts in this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7 | Counter | read-only | mandatory |
| snVrrpVirRtr OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | |||
| snVrrpVirRtrTable OBJECT-TYPE The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | not-accessible | mandatory | |
| snVrrpVirRtrEntry OBJECT-TYPE The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | not-accessible | mandatory | |
| snVrrpVirRtrPort OBJECT-TYPE The IP port of this VRRP interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 | INTEGER | read-only | mandatory |
| snVrrpVirRtrId OBJECT-TYPE One of the virtual router ID of this VRRP interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 | INTEGER (1..255) | read-only | mandatory |
| snVrrpVirRtrOwnership OBJECT-TYPE The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 | INTEGER {incomplete(0), owner(1), backup(2)} | read-write | mandatory |
| snVrrpVirRtrCfgPriority OBJECT-TYPE The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2). | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 | INTEGER (3..254) | read-write | mandatory |
| snVrrpVirRtrTrackPriority OBJECT-TYPE The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 | INTEGER (1..254) | read-write | mandatory |
| snVrrpVirRtrCurrPriority OBJECT-TYPE The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 | INTEGER (1..254) | read-only | mandatory |
| snVrrpVirRtrHelloInt OBJECT-TYPE Time interval between advertisements (seconds). | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 | INTEGER (1..84) | read-write | mandatory |
| snVrrpVirRtrDeadInt OBJECT-TYPE Dead interval (seconds). | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 | INTEGER (0..84) | read-write | mandatory |
| snVrrpVirRtrPreemptMode OBJECT-TYPE This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snVrrpVirRtrState OBJECT-TYPE This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 | INTEGER {init(0), master(1), backup(2)} | read-only | mandatory |
| snVrrpVirRtrActivate OBJECT-TYPE This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snVrrpVirRtrIpAddrMask OBJECT-TYPE The numbers of IP Addresses of this virtual router of this interface. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 | OCTET STRING (SIZE(64)) | read-write | mandatory |
| snVrrpVirRtrTrackPortMask OBJECT-TYPE This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 | OCTET STRING (SIZE(4..32)) | read-write | mandatory |
| snVrrpVirRtrTrackVifMask OBJECT-TYPE This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 | OCTET STRING (SIZE(4..8)) | read-write | mandatory |
| snVrrpVirRtrRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |
| snVrrpVirRtrRxArpPktDropCnts OBJECT-TYPE The received VRRP ARP Packet Drop Counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 | Counter | read-only | mandatory |
| snVrrpVirRtrRxIpPktDropCnts OBJECT-TYPE The received VRRP IP Packet Drop Counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 | Counter | read-only | mandatory |
| snVrrpVirRtrRxPortMismatchCnts OBJECT-TYPE The received VRRP Port mismatching Counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 | Counter | read-only | mandatory |
| snVrrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE The received VRRP Number of IP Addresses mismatching Counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 | Counter | read-only | mandatory |
| snVrrpVirRtrRxIpMismatchCnts OBJECT-TYPE The received VRRP IP Address mismatching Counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 | Counter | read-only | mandatory |
| snVrrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE The counts of the virtual router interface with hello interval mismatch counts. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 | Counter | read-only | mandatory |
| snVrrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE The counts of the virtual router interface with Priority zero from the master. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 | Counter | read-only | mandatory |
| snVrrpVirRtrRxHigherPriorityCnts OBJECT-TYPE The counts of the virtual router interface with higher Priority. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 | Counter | read-only | mandatory |
| snVrrpVirRtrTransToMasterStateCnts OBJECT-TYPE The counts of the virtual router interface transition to master state. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 | Counter | read-only | mandatory |
| snVrrpVirRtrTransToBackupStateCnts OBJECT-TYPE The counts of the virtual router interface transition to backup state. | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 | Counter | read-only | mandatory |
| snVrrpVirRtrCurrDeadInt OBJECT-TYPE Current Dead interval (in 100 milliseconds). | 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 | INTEGER | read-only | mandatory |
| snLoopbackIntfConfigTable OBJECT-TYPE Loopback Interface Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1 | not-accessible | mandatory | |
| snLoopbackIntfConfigEntry OBJECT-TYPE An entry in the Loopback Interface Config table. | 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1 | not-accessible | mandatory | |
| snLoopbackIntfConfigPortIndex OBJECT-TYPE The port index for Loopback Interface config entry. | 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1 | INTEGER (1..8) | read-only | mandatory |
| snLoopbackIntfMode OBJECT-TYPE The Loopback Interface mode. | 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2 | INTEGER {disabled(0), enabled(1)} | read-write | mandatory |
| snLoopbackIntfRowStatus OBJECT-TYPE This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid | 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3 | INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)} | read-write | mandatory |