MIBs Depot

HP-SN-BGP4-GROUP-MIB

Registered at
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19
Namespace
hp
Source file
HP-SN-BGP4-GROUP-MIB
Digest
sha256:7488580bf45ff38ded7bbff33258c7ca583200bb9cb031957891b5191fdca3d0

Imports

FromSymbols
HP-SN-ROOT-MIBsnBgp4
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-SN-BGP4-GROUP-MIB
HP-SN-ROOT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
snBgp4Gen
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1
snBgp4GenAlwaysCompareMed
OBJECT-TYPE
To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenAutoSummary
OBJECT-TYPE
To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenDefaultLocalPreference
OBJECT-TYPE
To set the default local preference attribute.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3INTEGERread-writemandatory
snBgp4GenDefaultInfoOriginate
OBJECT-TYPE
To enable/disable the default Information Originate.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenFastExternalFallover
OBJECT-TYPE
To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenNextBootNeighbors
OBJECT-TYPE
The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6INTEGERread-writemandatory
snBgp4GenNextBootRoutes
OBJECT-TYPE
The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7INTEGERread-writemandatory
snBgp4GenSynchronization
OBJECT-TYPE
To enable/disable the synchronization between BGP and your IGP.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9INTEGER (0..65535)read-writemandatory
snBgp4GenHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10INTEGER (0..65535)read-writemandatory
snBgp4GenRouterId
OBJECT-TYPE
BGP Router Id.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11IpAddressread-writemandatory
snBgp4GenTableMap
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4GenAdminStat
OBJECT-TYPE
The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenDefaultMetric
OBJECT-TYPE
To set default metric values for the BGP4 protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14INTEGERread-writemandatory
snBgp4GenMaxNeighbors
OBJECT-TYPE
The maximum number of neighbors can be configured in a BGP Peer Group.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15INTEGERread-onlymandatory
snBgp4GenMinNeighbors
OBJECT-TYPE
The minimum number of neighbors can be configured in a BGP Peer Group.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16INTEGERread-onlymandatory
snBgp4GenMaxRoutes
OBJECT-TYPE
The maximum configured number of Routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17INTEGERread-onlymandatory
snBgp4GenMinRoutes
OBJECT-TYPE
The minimum configured number of Routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18INTEGERread-onlymandatory
snBgp4GenMaxAddrFilters
OBJECT-TYPE
The maximum configured number of BGP4 address filters.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19INTEGERread-onlymandatory
snBgp4GenMaxAggregateAddresses
OBJECT-TYPE
The maximum configured number of BGP4 aggregate addresses.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20INTEGERread-onlymandatory
snBgp4GenMaxAsPathFilters
OBJECT-TYPE
The maximum configured number of BGP4 AS-PATH filters.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21INTEGERread-onlymandatory
snBgp4GenMaxCommunityFilters
OBJECT-TYPE
The maximum configured number of BGP4 Community filters.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22INTEGERread-onlymandatory
snBgp4GenMaxNetworks
OBJECT-TYPE
The maximum configured number of BGP4 Networks.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23INTEGERread-onlymandatory
snBgp4GenMaxRouteMapFilters
OBJECT-TYPE
The maximum configured number of BGP4 Route-map Filters.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24INTEGERread-onlymandatory
snBgp4GenNeighPrefixMinValue
OBJECT-TYPE
The minimum configured value of BGP4 Neighbor Prefix.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25INTEGERread-onlymandatory
snBgp4GenOperNeighbors
OBJECT-TYPE
The current operational max number of neighbors configured for a BGP Group.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26INTEGERread-onlymandatory
snBgp4GenOperRoutes
OBJECT-TYPE
The current operational number of Routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27INTEGERread-onlymandatory
snBgp4GenLocalAs
OBJECT-TYPE
Bgp4 local autonomous system number.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28INTEGER (1..65535)read-writemandatory
snBgp4GenRoutesInstalled
OBJECT-TYPE
Bgp4 installed routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29INTEGERread-onlymandatory
snBgp4GenAsPathInstalled
OBJECT-TYPE
Bgp4 installed autonomous system path.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30INTEGERread-onlymandatory
snBgp4ExternalDistance
OBJECT-TYPE
Administrative distance for BGP external routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31INTEGER (1..255)read-writemandatory
snBgp4InternalDistance
OBJECT-TYPE
Administrative distance for BGP internal routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32INTEGER (1..255)read-writemandatory
snBgp4LocalDistance
OBJECT-TYPE
Administrative distance for BGP local routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33INTEGER (1..255)read-writemandatory
snBgp4OperNumOfAttributes
OBJECT-TYPE
The operational number of attribute entries.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34INTEGERread-onlymandatory
snBgp4NextBootMaxAttributes
OBJECT-TYPE
The next boot maximum attribute entries. 10000 means reset to default.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35INTEGER (200..30000)read-writemandatory
snBgp4ClusterId
OBJECT-TYPE
A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36INTEGERread-writemandatory
snBgp4ClientToClientReflection
OBJECT-TYPE
To enable/disable the client to client reflection in BGP4.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4GenTotalNeighbors
OBJECT-TYPE
The current total number of neighbors running in a BGP Group.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38INTEGERread-onlymandatory
snBgp4GenMaxPaths
OBJECT-TYPE
The maximum configured number of Paths.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39INTEGER (1..8)read-writemandatory
snBgp4GenConfedId
OBJECT-TYPE
Bgp4 Confederation Id.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40INTEGER (1..65535)read-writemandatory
snBgp4GenConfedPeers
OBJECT-TYPE
An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41OCTET STRING (SIZE(0..100))read-writemandatory
snBgp4AddrFilter
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2
snBgp4AddrFilterTable
OBJECT-TYPE
Bgp4 Address Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1not-accessiblemandatory
snBgp4AddrFilterEntry
OBJECT-TYPE
An entry in the Bgp4 Address Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1not-accessiblemandatory
snBgp4AddrFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1INTEGERread-onlymandatory
snBgp4AddrFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2INTEGER {deny(0), permit(1)}read-writemandatory
snBgp4AddrFilterSourceIp
OBJECT-TYPE
Source IP address.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3IpAddressread-writemandatory
snBgp4AddrFilterSourceMask
OBJECT-TYPE
Source IP subnet mask.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4IpAddressread-writemandatory
snBgp4AddrFilterDestIp
OBJECT-TYPE
Destination IP address.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5IpAddressread-writemandatory
snBgp4AddrFilterDestMask
OBJECT-TYPE
Destination IP subnet mask.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6IpAddressread-writemandatory
snBgp4AddrFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4AggregateAddr
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3
snBgp4AggregateAddrTable
OBJECT-TYPE
Bgp4 Aggregate Address table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1not-accessiblemandatory
snBgp4AggregateAddrEntry
OBJECT-TYPE
An entry in the Bgp4 Aggregate Address table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1not-accessiblemandatory
snBgp4AggregateAddrIp
OBJECT-TYPE
Aggregate Address IP address.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1IpAddressread-onlymandatory
snBgp4AggregateAddrMask
OBJECT-TYPE
Aggregate Address IP subnet mask.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2IpAddressread-onlymandatory
snBgp4AggregateAddrOption
OBJECT-TYPE
address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3INTEGER {address(1), asSet(2), summaryOnly(3), suppressMap(4), advertiseMap(5), attributeMap(6)}read-onlymandatory
snBgp4AggregateAddrMap
OBJECT-TYPE
This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4AggregateAddrRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4AsPathFilter
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4
snBgp4AsPathFilterTable
OBJECT-TYPE
Bgp4 AS-Path Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1not-accessiblemandatory
snBgp4AsPathFilterEntry
OBJECT-TYPE
An entry in the Bgp4 As-path Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1not-accessiblemandatory
snBgp4AsPathFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1INTEGERread-onlymandatory
snBgp4AsPathFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2INTEGER {deny(0), permit(1)}read-writemandatory
snBgp4AsPathFilterRegExpression
OBJECT-TYPE
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3OCTET STRING (SIZE(0..256))read-writemandatory
snBgp4AsPathFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4CommunityFilter
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5
snBgp4CommunityFilterTable
OBJECT-TYPE
Bgp4 Community Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1not-accessiblemandatory
snBgp4CommunityFilterEntry
OBJECT-TYPE
An entry in the Bgp4 Community Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1not-accessiblemandatory
snBgp4CommunityFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1INTEGERread-onlymandatory
snBgp4CommunityFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2INTEGER {deny(0), permit(1)}read-writemandatory
snBgp4CommunityFilterCommNum
OBJECT-TYPE
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3OCTET STRING (SIZE(0..80))read-writemandatory
snBgp4CommunityFilterInternet
OBJECT-TYPE
Disabled/Enabled the Internet Community.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4CommunityFilterNoAdvertise
OBJECT-TYPE
Do not advertise this route to any peer (internal or external).
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5INTEGER {false(0), true(1)}read-writemandatory
snBgp4CommunityFilterNoExport
OBJECT-TYPE
Do not advertise this route to an EBGP peer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6INTEGER {false(0), true(1)}read-writemandatory
snBgp4CommunityFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4CommunityFilterLocalAs
OBJECT-TYPE
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8INTEGER {false(0), true(1)}read-writemandatory
snBgp4NeighGenCfg
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6
snBgp4NeighGenCfgTable
OBJECT-TYPE
Bgp4 Neighbor General Configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1not-accessiblemandatory
snBgp4NeighGenCfgEntry
OBJECT-TYPE
An entry in the Bgp4 Community Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1not-accessiblemandatory
snBgp4NeighGenCfgNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1IpAddressread-onlymandatory
snBgp4NeighGenCfgAdvertlevel
OBJECT-TYPE
To set the minimum interval between the sending of BGP routing updates.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2INTEGER (0..600)read-writemandatory
snBgp4NeighGenCfgDefOriginate
OBJECT-TYPE
To enable/disable the default originate for this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgEbgpMultihop
OBJECT-TYPE
To enable/disable the EBGP Muitihop for this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgMaxPrefix
OBJECT-TYPE
To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5INTEGERread-writemandatory
snBgp4NeighGenCfgNextHopSelf
OBJECT-TYPE
To enable/disable the next-hop processing of BGP updates on the router.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgRemoteAs
OBJECT-TYPE
To specify a neighbor with an autonomous system number(AS).
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7INTEGER (1..65535)read-writemandatory
snBgp4NeighGenCfgSendComm
OBJECT-TYPE
To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgWeight
OBJECT-TYPE
To assign a weight to a neighbor connection.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9INTEGER (0..65535)read-writemandatory
snBgp4NeighGenCfgWeightFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4NeighGenCfgRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5), applyDefault(6)}read-writemandatory
snBgp4NeighGenCfgUpdateSrcLpbIntf
OBJECT-TYPE
To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12INTEGER (0..8)read-writemandatory
snBgp4NeighGenCfgRouteRefClient
OBJECT-TYPE
To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgRemovePrivateAs
OBJECT-TYPE
To enable/disable filtering private AS number.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgEbgpMultihopTtl
OBJECT-TYPE
The EBGP Muitihop TTL for this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15INTEGER (0..255)read-writemandatory
snBgp4NeighGenCfgShutdown
OBJECT-TYPE
To enable/disable BGP4 Nbr Shutdown.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NeighGenCfgKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17INTEGER (0..65535)read-writemandatory
snBgp4NeighGenCfgHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18INTEGER (0..65535)read-writemandatory
snBgp4NeighDistGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7
snBgp4NeighDistGroupTable
OBJECT-TYPE
Bgp4 Neighbor Distribute Group table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1not-accessiblemandatory
snBgp4NeighDistGroupEntry
OBJECT-TYPE
An entry in the Bgp4 Distribute Group table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1not-accessiblemandatory
snBgp4NeighDistGroupNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1IpAddressread-onlymandatory
snBgp4NeighDistGroupDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2INTEGER {out(0), in(1)}read-onlymandatory
snBgp4NeighDistGroupAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4NeighDistGroupRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4NeighFilterGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8
snBgp4NeighFilterGroupTable
OBJECT-TYPE
Bgp4 Neighbor Filter Group table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1not-accessiblemandatory
snBgp4NeighFilterGroupEntry
OBJECT-TYPE
An entry in the Bgp4 Neighbor Filter Group table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1not-accessiblemandatory
snBgp4NeighFilterGroupNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1IpAddressread-onlymandatory
snBgp4NeighFilterGroupDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2INTEGER {out(0), in(1)}read-onlymandatory
snBgp4NeighFilterGroupAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4NeighFilterGroupRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4NeighRouteMap
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9
snBgp4NeighRouteMapTable
OBJECT-TYPE
Bgp4 Neighbor Route Map table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1not-accessiblemandatory
snBgp4NeighRouteMapEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1not-accessiblemandatory
snBgp4NeighRouteMapNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1IpAddressread-onlymandatory
snBgp4NeighRouteMapDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2INTEGER {out(0), in(1)}read-onlymandatory
snBgp4NeighRouteMapMapName
OBJECT-TYPE
An octet string of the route-map name, Each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4NeighRouteMapRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4Network
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10
snBgp4NetworkTable
OBJECT-TYPE
Bgp4 Network Weight table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1not-accessiblemandatory
snBgp4NetworkEntry
OBJECT-TYPE
An entry in the Bgp4 Network Weight table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1not-accessiblemandatory
snBgp4NetworkIp
OBJECT-TYPE
The IP Address for a network entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1IpAddressread-onlymandatory
snBgp4NetworkSubnetMask
OBJECT-TYPE
The subnet mask for a network entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2IpAddressread-onlymandatory
snBgp4NetworkWeight
OBJECT-TYPE
To assign a weight to a neighbor connection.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3INTEGER (0..65535)read-writemandatory
snBgp4NetworkBackdoor
OBJECT-TYPE
To enable/disable the backdoor for this network.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4NetworkRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4Redis
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11
snBgp4RedisTable
OBJECT-TYPE
The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1not-accessiblemandatory
snBgp4RedisEntry
OBJECT-TYPE
The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1not-accessiblemandatory
snBgp4RedisProtocol
OBJECT-TYPE
The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1INTEGER {rip(1), ospf(2), static(3), connected(4)}read-onlymandatory
snBgp4RedisMetric
OBJECT-TYPE
The metric of using the specified protocol Metric value.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2INTEGERread-writemandatory
snBgp4RedisRouteMap
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4RedisWeight
OBJECT-TYPE
To assign a weight for the specified protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4INTEGER (0..65535)read-writemandatory
snBgp4RedisMatchInternal
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4RedisMatchExternal1
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4RedisMatchExternal2
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4RedisRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4RouteMapFilter
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12
snBgp4RouteMapFilterTable
OBJECT-TYPE
Bgp4 RouteMap Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1not-accessiblemandatory
snBgp4RouteMapFilterEntry
OBJECT-TYPE
An entry in the Bgp4 RouteMap Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1not-accessiblemandatory
snBgp4RouteMapFilterMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1OCTET STRING (SIZE(0..32))read-onlymandatory
snBgp4RouteMapFilterSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2INTEGERread-onlymandatory
snBgp4RouteMapFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3INTEGER {deny(0), permit(1)}read-writemandatory
snBgp4RouteMapFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snBgp4RouteMapMatch
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13
snBgp4RouteMapMatchTable
OBJECT-TYPE
Bgp4 Route Map Set table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1not-accessiblemandatory
snBgp4RouteMapMatchEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map Match table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1not-accessiblemandatory
snBgp4RouteMapMatchMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1OCTET STRING (SIZE(0..32))read-onlymandatory
snBgp4RouteMapMatchSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2INTEGERread-onlymandatory
snBgp4RouteMapMatchAsPathFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3OCTET STRING (SIZE(0..20))read-writemandatory
snBgp4RouteMapMatchCommunityFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4OCTET STRING (SIZE(0..20))read-writemandatory
snBgp4RouteMapMatchAddressFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5OCTET STRING (SIZE(0..20))read-writemandatory
snBgp4RouteMapMatchMetric
OBJECT-TYPE
To match a metric for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6INTEGERread-writemandatory
snBgp4RouteMapMatchNextHopList
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4RouteMapMatchRouteType
OBJECT-TYPE
To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8INTEGER {none(0), external(1), externalType1(2), externalType2(3), internal(4), local(5)}read-writemandatory
snBgp4RouteMapMatchTagList
OBJECT-TYPE
To match a BGP tag access list.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4RouteMapMatchRowMask
OBJECT-TYPE
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10INTEGERread-writemandatory
snBgp4RouteMapSet
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14
snBgp4RouteMapSetTable
OBJECT-TYPE
Bgp4 Route Map Set table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1not-accessiblemandatory
snBgp4RouteMapSetEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map Set table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1not-accessiblemandatory
snBgp4RouteMapSetMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1OCTET STRING (SIZE(0..32))read-onlymandatory
snBgp4RouteMapSetSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2INTEGERread-onlymandatory
snBgp4RouteMapSetAsPathType
OBJECT-TYPE
To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3INTEGER {tag(0), prepend(1)}read-writemandatory
snBgp4RouteMapSetAsPathString
OBJECT-TYPE
as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4OCTET STRING (SIZE(0..32))read-writemandatory
snBgp4RouteMapSetAutoTag
OBJECT-TYPE
To enable/disable the automatic-tag for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4RouteMapSetCommunityType
OBJECT-TYPE
To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6INTEGER {nums(0), none(3)}read-writemandatory
snBgp4RouteMapSetCommunityNum
OBJECT-TYPE
community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7INTEGERread-writedeprecated
snBgp4RouteMapSetCommunityAdditive
OBJECT-TYPE
To add the community to the already existing communities.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8INTEGER {disabled(0), enabled(1)}read-writemandatory
snBgp4RouteMapSetLocalPreference
OBJECT-TYPE
To modify a local-preference for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9INTEGERread-writemandatory
snBgp4RouteMapSetMetric
OBJECT-TYPE
To modify a metric for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10INTEGERread-writemandatory
snBgp4RouteMapSetNextHop
OBJECT-TYPE
To modify the IP address of the next hop for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11IpAddressread-writemandatory
snBgp4RouteMapSetOrigin
OBJECT-TYPE
To set the BGP origin code.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12INTEGER {igp(0), egp(1), incomplete(2)}read-writemandatory
snBgp4RouteMapSetTag
OBJECT-TYPE
To specify the tag for BGP routes.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13INTEGERread-writemandatory
snBgp4RouteMapSetWeight
OBJECT-TYPE
To specify the BGP weight for the routing table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14INTEGER (0..65535)read-writemandatory
snBgp4RouteMapSetRowMask
OBJECT-TYPE
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15INTEGERread-writemandatory
snBgp4RouteMapSetCommunityNums
OBJECT-TYPE
Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16OCTET STRING (SIZE(0..24))read-writemandatory
snBgp4NeighOperStatus
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15
snBgp4NeighOperStatusTable
OBJECT-TYPE
Bgp4 Neighbor Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1not-accessiblemandatory
snBgp4NeighOperStatusEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1not-accessiblemandatory
snBgp4NeighOperStatusIndex
OBJECT-TYPE
The index for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1INTEGERread-onlymandatory
snBgp4NeighOperStatusIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2IpAddressread-onlymandatory
snBgp4NeighOperStatusRemoteAs
OBJECT-TYPE
To show a neighbor with an autonomous system number(AS).
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3INTEGERread-onlymandatory
snBgp4NeighOperStatusBgpType
OBJECT-TYPE
To show the type of BGP protocol whether is internal or external.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4INTEGER {ebgp(0), ibgp(1)}read-onlymandatory
snBgp4NeighOperStatusState
OBJECT-TYPE
To show the state of this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5INTEGER {noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)}read-onlymandatory
snBgp4NeighOperStatusKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6INTEGERread-onlymandatory
snBgp4NeighOperStatusHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7INTEGERread-onlymandatory
snBgp4NeighOperStatusAdvertlevel
OBJECT-TYPE
To show the minimum interval between the sending of BGP routing updates.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8INTEGERread-onlymandatory
snBgp4NeighOperStatusKeepAliveTxCounts
OBJECT-TYPE
Keep alive message sent counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9Counterread-onlymandatory
snBgp4NeighOperStatusKeepAliveRxCounts
OBJECT-TYPE
Keep alive message received counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10Counterread-onlymandatory
snBgp4NeighOperStatusUpdateTxCounts
OBJECT-TYPE
Update message sent counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11Counterread-onlymandatory
snBgp4NeighOperStatusUpdateRxCounts
OBJECT-TYPE
Update message received counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12Counterread-onlymandatory
snBgp4NeighOperStatusNotifTxCounts
OBJECT-TYPE
Notification message sent counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13Counterread-onlymandatory
snBgp4NeighOperStatusNotifRxCounts
OBJECT-TYPE
Notification message received counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14Counterread-onlymandatory
snBgp4NeighOperStatusOpenTxCounts
OBJECT-TYPE
Open message sent counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15Counterread-onlymandatory
snBgp4NeighOperStatusOpenRxCounts
OBJECT-TYPE
Open message received counts.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16Counterread-onlymandatory
snBgp4RouteOperStatus
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16
snBgp4RouteOperStatusTable
OBJECT-TYPE
Bgp4 Routebor Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1not-accessiblemandatory
snBgp4RouteOperStatusEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1not-accessiblemandatory
snBgp4RouteOperStatusIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1INTEGERread-onlymandatory
snBgp4RouteOperStatusIp
OBJECT-TYPE
The IP Address for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2IpAddressread-onlymandatory
snBgp4RouteOperStatusSubnetMask
OBJECT-TYPE
The IP Subnet Mask for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3IpAddressread-onlymandatory
snBgp4RouteOperStatusNextHop
OBJECT-TYPE
The next-hop IP for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4IpAddressread-onlymandatory
snBgp4RouteOperStatusMetric
OBJECT-TYPE
To show the metric value of a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5INTEGERread-onlymandatory
snBgp4RouteOperStatusLocalPreference
OBJECT-TYPE
To show the local preference of a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6INTEGERread-onlymandatory
snBgp4RouteOperStatusWeight
OBJECT-TYPE
To show the weight of this route.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7INTEGERread-onlymandatory
snBgp4RouteOperStatusOrigin
OBJECT-TYPE
To show the origin of this route.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8INTEGER {igp(0), egp(1), incomplete(2)}read-onlymandatory
snBgp4RouteOperStatusStatus
OBJECT-TYPE
A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9INTEGERread-onlymandatory
snBgp4RouteOperStatusRouteTag
OBJECT-TYPE
To show the route tag of this route.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10INTEGERread-onlymandatory
snBgp4RouteOperStatusCommunityList
OBJECT-TYPE
To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11OCTET STRINGread-onlymandatory
snBgp4RouteOperStatusAsPathList
OBJECT-TYPE
To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12OCTET STRINGread-onlymandatory
snBgp4NeighborSummary
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17
snBgp4NeighborSummaryTable
OBJECT-TYPE
Bgp4 Routebor Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1not-accessiblemandatory
snBgp4NeighborSummaryEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1not-accessiblemandatory
snBgp4NeighborSummaryIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1INTEGERread-onlymandatory
snBgp4NeighborSummaryIp
OBJECT-TYPE
The IP Address for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2IpAddressread-onlymandatory
snBgp4NeighborSummaryState
OBJECT-TYPE
To show the state of this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3INTEGER {noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)}read-onlymandatory
snBgp4NeighborSummaryStateChgTime
OBJECT-TYPE
The time of a change of the state of this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4INTEGERread-onlymandatory
snBgp4NeighborSummaryRouteReceived
OBJECT-TYPE
The number of routes received of this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5INTEGERread-onlymandatory
snBgp4NeighborSummaryRouteInstalled
OBJECT-TYPE
The number of routes installed of this neighbor.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6INTEGERread-onlymandatory
snBgp4Attribute
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18
snBgp4AttributeTable
OBJECT-TYPE
Bgp4 Attribute entries table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1not-accessiblemandatory
snBgp4AttributeEntry
OBJECT-TYPE
An entry in the Bgp4 Attribute table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1not-accessiblemandatory
snBgp4AttributeIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1INTEGERread-onlymandatory
snBgp4AttributeNextHop
OBJECT-TYPE
The next-hop IP for a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2IpAddressread-onlymandatory
snBgp4AttributeMetric
OBJECT-TYPE
To show the metric value of a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3INTEGERread-onlymandatory
snBgp4AttributeOrigin
OBJECT-TYPE
To show the origin of this route.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4INTEGER {igp(0), egp(1), incomplete(2)}read-onlymandatory
snBgp4AttributeAggregatorAs
OBJECT-TYPE
The aggregator AS number for an attribute entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5INTEGERread-onlymandatory
snBgp4AttributeRouterId
OBJECT-TYPE
The router ID for an attribute entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6IpAddressread-onlymandatory
snBgp4AttributeAtomicAggregatePresent
OBJECT-TYPE
The atomic aggregate present in an attribute entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7INTEGER {false(0), true(1)}read-onlymandatory
snBgp4AttributeLocalPreference
OBJECT-TYPE
To show the local preference of a route entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8INTEGERread-onlymandatory
snBgp4AttributeCommunityList
OBJECT-TYPE
To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9OCTET STRINGread-onlymandatory
snBgp4AttributeAsPathList
OBJECT-TYPE
To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10OCTET STRINGread-onlymandatory
snBgp4AttributeOriginator
OBJECT-TYPE
The originator IP address for an attribute entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11IpAddressread-onlymandatory
snBgp4AttributeClusterList
OBJECT-TYPE
To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12OCTET STRINGread-onlymandatory
snBgp4ClearNeighborCmd
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19
snBgp4ClearNeighborCmdTable
OBJECT-TYPE
Clear Bgp4 command table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1not-accessiblemandatory
snBgp4ClearNeighborCmdEntry
OBJECT-TYPE
An entry in the clear Bgp4 neighbor command table.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1not-accessiblemandatory
snBgp4ClearNeighborCmdIp
OBJECT-TYPE
The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1IpAddressread-onlymandatory
snBgp4ClearNeighborCmdElement
OBJECT-TYPE
To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2INTEGER {valid(0), lastPacketWithError(1), notificationErrors(2), softOutbound(3), traffic(4), neighbor(5)}read-writemandatory