MIBs Depot

HP-ICF-SRCIP-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.1.13
Last updated
2016-08-29 00:00
Organization
HP Networking
Revisions
2016-08-29 00:00, 2011-07-21 00:00, 2009-04-30 00:00, 2008-10-10 00:00
Namespace
hp
Source file
HP-ICF-SRCIP-MIB
Digest
sha256:f6b4358e4c5d5c7780a073ae470127e7218a8b08732c2862302d2fa798d50d42

Description

This MIB module contains the definitions of HP proprietary Managed Objects used for managing HP Routing switches with implemented source IP address administrative control.

Contact

Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
HP-ICF-OIDhpicfCommon
IF-MIBInterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-ICF-OID
HP-ICF-SRCIP-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpicfSrcIpConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.1.13.1
hpicfSrcIpAddrPolicyTable
OBJECT-TYPE
A table of entries used to configure the policy for selecting source IP address for different application protocols while transmitting the protocol specific IP packets. When the entry is configured the outgoing IP packets generated by the corresponding application protocol will have the source IP address field modified based on the configured policy option.
1.3.6.1.4.1.11.2.14.11.1.13.1.1not-accessiblecurrent
hpicfSrcIpAddrPolicyEntry
OBJECT-TYPE
An entry in the 'hpicfSrcIpAddrPolicyTable' containing information about a source IP address selection policy.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1not-accessiblecurrent
hpicfSrcIpAddressType
OBJECT-TYPE
Type of IP address. The only values expected are ipv4 or ipv6.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.1InetAddressTypenot-accessiblecurrent
hpicfSrcIpProtocolIndex
OBJECT-TYPE
The application protocol index value which uniquely identifies a row in the 'hpicfSrcIpAddrPolicyTable'.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.2INTEGER {tacacs(1), radius(2), syslog(3), telnet(4), tftp(5), sntp(6), sflow(7), tunnelednodeserver(8)}not-accessiblecurrent
hpicfSrcIpAddrPolicy
OBJECT-TYPE
The policy for selecting the source IP address. outgoingInterface - the IP address of outgoing interface should be used as the source. This is the default behavior if no other policy is configured. configuredIpAddr - the specific IP address configured on one of the switch's IP interfaces (VLAN or loopback) should be used as the source. configuredInterface - an IP address configured on the specified IP interface (VLAN or loopback) should be used as the source. In case of multi-netted interface the lexicographically lowest IP address will be used.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.3INTEGER {outgoingInterface(1), configuredIpAddr(2), configuredInterface(3)}read-writecurrent
hpicfSrcIpAddrIfIndex
OBJECT-TYPE
Index of IP interface whose IP address should be used as source IP while sending application protocol packets. On multi-netted interface the lexicographically lowest IP address will be used. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.4InterfaceIndexOrZeroread-writecurrent
hpicfSrcIpAddress
OBJECT-TYPE
Administratively assigned IP address that should be used as source while sending application protocol packets. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.
1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5InetAddressread-writecurrent
hpicfSrcIpConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.1.13.2
hpicfSrcIpGroups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.1.13.2.1
hpicfSrcIpCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.1.13.2.2

Conformance

NameOIDStatus
hpicfSrcIpBaseGroup
OBJECT-GROUP
A collection of objects allowing configuration of policies for selecting source IP address for application protocols.
1.3.6.1.4.1.11.2.14.11.1.13.2.1.1current
hpicfSrcIpCompliance
MODULE-COMPLIANCE
The core compliance statement for HP Routing switches with source IP address administrative control.
1.3.6.1.4.1.11.2.14.11.1.13.2.2.1current