HP-ICF-SMART-LINK-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.5.1.96
- Last updated
- 2013-03-20 00:00
- Organization
- HP Networking
- Revisions
- 2013-03-20 00:00
- Namespace
- hp
- Source file
HP-ICF-SMART-LINK-MIB- Digest
sha256:ade242683bd1782105d021557b1c7880f1578325e33c03862bbb9381f03e29a0
Description
This MIB module provides information about Smart link feature. Smart link group is a pair of Layer 2 interfaces, where one of the interfaces is configured as master and other acts as slave. The feature provides an alternative solution to the Spanning Tree Protocol (STP). Smart link is typically configured in service provider or enterprise networks where users do not want to run STP on the device.
Contact
Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| HP-ICF-OID | hpSwitch |
| Q-BRIDGE-MIB | VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB HP-ICF-OID HP-ICF-SMART-LINK-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfSmartLinkNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.0 | |||
| hpicfSmartLinkNotifyGroupIndex OBJECT-TYPE The object which uniquely identifies the Smart link group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.0.1 | Integer32 (1..65535) | accessible-for-notify | current |
| hpicfSmartLinkObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.1 | |||
| hpicfSmartLinkFlushStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1 | |||
| hpicfSmartLinkLastFlushTime OBJECT-TYPE Time when last flush packet was received. An empty string indicates that flush packets are not received. This object will be set to empty string when hpicfSmartLinkResetFlushStatistics is set to true (1). | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1.1 | DateAndTime | read-only | current |
| hpicfSmartLinkTotalFlushPktsRx OBJECT-TYPE Total number of flush packets received. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1.2 | Counter64 | read-only | current |
| hpicfSmartLinkLastFlushPort OBJECT-TYPE Port on which last flush packet was received. A value of 0 (zero) indicates that flush packets are not received. This object will be set to 0 (zero) when hpicfSmartLinkResetFlushStatistics is set to true (1). | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1.3 | Integer32 (0..65535) | read-only | current |
| hpicfSmartLinkLastFlushDeviceId OBJECT-TYPE Device ID from last received flush packet. An empty string indicates that flush packets are not received. This object will be set to empty string when hpicfSmartLinkResetFlushStatistics is set to true (1). | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1.4 | MacAddress | read-only | current |
| hpicfSmartLinkLastFlushVlan OBJECT-TYPE The control VLAN of the last received flush packet. A value of 0 (zero) indicates that flush packets are not received. This object will be set to 0(zero) when hpicfSmartLinkResetFlushStatistics is set to true (1). | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.1.5 | VlanIndex | read-only | current |
| hpicfSmartLinkResetFlushStatistics OBJECT-TYPE Set this to true(1) to reset the flush packet statistics. This MIB object will always return false(2) upon read. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.2 | TruthValue | read-write | current |
| hpicfSmartLinkGroupTable OBJECT-TYPE This table allows user to configure Smart link groups. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3 | not-accessible | current | |
| hpicfSmartLinkGroupEntry OBJECT-TYPE An entry containing information about a Smart link group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1 | not-accessible | current | |
| hpicfSmartLinkGroupIndex OBJECT-TYPE The Object which uniquely identifies the Smart link group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.1 | Integer32 (1..65535) | not-accessible | current |
| hpicfSmartLinkGroupMasterPort OBJECT-TYPE This object is used to configure master port of this group. The value of 0 (zero) indicates that master port is not configured for this group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.2 | Integer32 (0..65535) | read-create | current |
| hpicfSmartLinkGroupSlavePort OBJECT-TYPE This object is used to configure slave port of this group. The value of 0 (zero) indicates that slave port is not configured for this group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.3 | Integer32 (0..65535) | read-create | current |
| hpicfSmartLinkGroupSendControlVlan OBJECT-TYPE The object indicates the VLAN on which the flush packets are sent for this group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.4 | VlanIndex | read-create | current |
| hpicfSmartLinkGroupPreemptionMode OBJECT-TYPE The object specifies the preemption mechanism for this group. off(1) - No preemption happens from master to slave. role(2) - The master always preempts to slave after the time specified in hpicfSmartLinkGroupPreemptionDelay. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.5 | INTEGER {off(1), role(2)} | read-create | current |
| hpicfSmartLinkGroupPreemptionDelay OBJECT-TYPE The delay time, in seconds, until standby preempts active on this group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.6 | Integer32 (0..300) | read-create | current |
| hpicfSmartLinkGroupProtectedVlan1k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 1 to 1024. The first octet corresponds to VLAN IDs 1 through 8, the second octet to VLAN IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.7 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkGroupProtectedVlan2k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 1025 to 2048. The first octet corresponds to VLAN IDs 1025 through 1032, the second octet to VLAN IDs 1033 through 1040, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.8 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkGroupProtectedVlan3k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 2049 to 3072. The first octet corresponds to VLAN IDs 2049 through 2056, the second octet to VLAN IDs 2057 through 2064, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.9 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkGroupProtectedVlan4k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 3073 to 4094. The first octet corresponds to VLAN IDs 3073 through 3080, the second octet to VLAN IDs 3081 through 3088, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.10 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkGroupTrapControl OBJECT-TYPE Setting this object to the value of true(1) allows the system to send hpicfSmartLinkPortRoleChangeNotification trap whenever standby link takes over active link. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.11 | TruthValue | read-create | current |
| hpicfSmartLinkGroupClearStats OBJECT-TYPE Setting this object to the value of true(1) clears the group statistics. This object will always return false(2). | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.12 | TruthValue | read-create | current |
| hpicfSmartLinkGroupRowStatus OBJECT-TYPE Status of the row in hpicfSmartLinkGroupTable. This object must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The columns can be modified only when the RowStatus is 'active'. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.13 | RowStatus | read-create | current |
| hpicfSmartLinkExtendedGroupTable OBJECT-TYPE This table contains information of Smart link groups. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4 | not-accessible | current | |
| hpicfSmartLinkExtendedGroupEntry OBJECT-TYPE An entry containing information about a Smart link group. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1 | not-accessible | current | |
| hpicfSmartLinkGroupMasterPortState OBJECT-TYPE The status of an interface participating in Smart link operation. uninitialized (1) - A value of 'uninitialized' indicates that, the interface is not configured. active(2) - A value of 'active' indicates that, the interface is actively forwarding traffic. standby(3) - A value of 'standby' indicates that, the interface is ready to forward traffic if the active interface goes down. down(4) - A value of 'down' indicates that, the interface is physically down. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.1 | INTEGER {uninitialized(1), active(2), standby(3), down(4)} | read-only | current |
| hpicfSmartLinkGroupSlavePortState OBJECT-TYPE The status of an interface participating in Smart link operation. uninitialized (1) - A value of ' uninitialized ' indicates that, the interface is not configured. active(2) - A value of 'active' indicates that, the interface is actively forwarding traffic. standby(3) - A value of 'standby' indicates that, the interface is ready to forward traffic if the active interface goes down. down(4) - A value of 'down' indicates that, the interface is physically down. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.2 | INTEGER {uninitialized(1), active(2), standby(3), down(4)} | read-only | current |
| hpicfSmartLinkMasterFlushPktTx OBJECT-TYPE Number of flush packets sent on master port. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.3 | Counter64 | read-only | current |
| hpicfSmartLinkMasterFlushPktLastUpdate OBJECT-TYPE This MIB object indicates the time at which the last flush packet was sent on master port. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.4 | DateAndTime | read-only | current |
| hpicfSmartLinkSlaveFlushPktTx OBJECT-TYPE Number of flush packets sent on slave port. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.5 | Counter64 | read-only | current |
| hpicfSmartLinkSlaveFlushPktLastUpdate OBJECT-TYPE This MIB object indicates the time at which the last flush packet was sent on slave port. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.6 | DateAndTime | read-only | current |
| hpicfSmartLinkPortTable OBJECT-TYPE This table allows user to configure Smart link port attributes. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5 | not-accessible | current | |
| hpicfSmartLinkPortEntry OBJECT-TYPE An entry, containing configuration information of a Smart link port. An entry will be created when receive control VLANs are configured for this port. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1 | not-accessible | current | |
| hpicfSmartLinkPortIndex OBJECT-TYPE The port which uniquely identifies a row in this entry | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.1 | Integer32 (1..65535) | not-accessible | current |
| hpicfSmartLinkRecvControlVlans1k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 1 to 1024. The first octet corresponds to VLAN IDs 1 through 8, the second octet to VLAN IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.2 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkRecvControlVlans2k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 1025 to 2048. The first octet corresponds to VLAN IDs 1025 through 1032, the second octet to VLAN IDs 1033 through 1040, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.3 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkRecvControlVlans3k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 2049 to 3072. The first octet corresponds to VLAN IDs 2049 through 2056, the second octet to VLAN IDs 2057 through 2064, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.4 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkRecvControlVlans4k OBJECT-TYPE A string of octets containing one bit per protected VLAN from VLAN IDs 3073 to 4094. The first octet corresponds to VLAN IDs 3073 through 3080, the second octet to VLAN IDs 3081 through 3088, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.5 | OCTET STRING (SIZE(0..128)) | read-create | current |
| hpicfSmartLinkPortRowStatus OBJECT-TYPE Status of the row in hpicfSmartLinkPortTable. This object must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The columns can be modified only when the rowstatus is 'active'. | 1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.6 | RowStatus | read-create | current |
| hpicfSmartLinkConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.2 | |||
| hpicfSmartLinkConformanceGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1 | |||
| hpicfSmartLinkCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpicfSmartLinkPortStateChangeNotification NOTIFICATION-TYPE A hpicfSmartLinkPortStateChangeNotification is generated when standby port transits to active state. | 1.3.6.1.4.1.11.2.14.11.5.1.96.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hpicfSmartLinkGlobalGroup OBJECT-GROUP These objects contains Smart link global statistics. | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1.1 | current |
| hpicfSmartLinkGroupsGroup OBJECT-GROUP These objects are used for managing and monitoring Smart link groups. | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1.2 | current |
| hpicfSmartLinkPortGroup OBJECT-GROUP These objects are used for managing and monitoring Smart link interfaces. | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1.3 | current |
| hpicfSmartLinkNotificationObjectsGroup OBJECT-GROUP Group of objects required to control traps for Smart link interfaces. | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1.4 | current |
| hpicfSmartLinkNotificationGroup NOTIFICATION-GROUP Group of notifications for Smart link interfaces. | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.1.5 | current |
| hpicfSmartLinkCompliance1 MODULE-COMPLIANCE The compliance statement | 1.3.6.1.4.1.11.2.14.11.5.1.96.2.2.1 | current |