MIBs Depot

HP-ICF-RPVST-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.5.1.88
Last updated
2017-08-08 00:00
Organization
HP Networking
Revisions
2017-08-08 00:00, 2013-03-21 00:28, 2011-08-08 00:00
Namespace
hp
Source file
HP-ICF-RPVST-MIB
Digest
sha256:c3dd76b197c127f75826d4b6d7bda50734618ccb52f3fea851999e56173f3b61

Description

The MIB module Rapid Per VLAN Spanning Tree(RPVST).

Contact

Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
BRIDGE-MIBBridgeId
HP-ICF-OIDhpSwitch
HP-ICF-TCStpPortRole
Q-BRIDGE-MIBVlanIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HP-ICF-OID
HP-ICF-RPVST-MIB
HP-ICF-TC
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
PointToPoint
TEXTUAL-CONVENTION
forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5.
current

Objects

NameOIDSyntaxAccessStatus
hpicfRpvstNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.0
hpicfRpvstErrantBpduDetector
OBJECT-TYPE
The identifier of the feature generating Errant BPDU trap.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.1INTEGER {bpduFilter(1), bpduProtection(2)}accessible-for-notifycurrent
hpicfRpvstErrantBpduSrcMac
OBJECT-TYPE
The source MAC address of the port sending Errant BPDU.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.2MacAddressaccessible-for-notifycurrent
hpicfRpvstNewRootBridgeId
OBJECT-TYPE
Bridge ID of the new Root. Bridge Id consists of priority and MAC address.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.3BridgeIdaccessible-for-notifycurrent
hpicfRpvstPreviousRootBridgeId
OBJECT-TYPE
Bridge ID of the previous Root. Bridge Id consists of priority and MAC address.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.4BridgeIdaccessible-for-notifycurrent
hpicfRpvstDesignatedPort
OBJECT-TYPE
Designated Port of the Bridge.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.5DisplayStringaccessible-for-notifycurrent
hpicfRpvstVlanIndex
OBJECT-TYPE
VLAN ID
1.3.6.1.4.1.11.2.14.11.5.1.88.0.6VlanIndexaccessible-for-notifycurrent
hpicfRpvstPortNumber
OBJECT-TYPE
Port number
1.3.6.1.4.1.11.2.14.11.5.1.88.0.7Integer32 (1..65535)accessible-for-notifycurrent
hpicfRpvstRootBridgeChangeTimeStamp
OBJECT-TYPE
Time when the root changed
1.3.6.1.4.1.11.2.14.11.5.1.88.0.8DateAndTimeaccessible-for-notifycurrent
hpicfRpvstSuperiorBpduSrcMac
OBJECT-TYPE
The source MAC address of the port sending superior BPDU.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.9MacAddressaccessible-for-notifycurrent
hpicfRpvstSuperiorBpduSrcPort
OBJECT-TYPE
Port belonging to the Bridge from which the superior BPDU was received.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.10Integer32 (1..65535)accessible-for-notifycurrent
hpicfRpvstOldPortRole
OBJECT-TYPE
Old Port state
1.3.6.1.4.1.11.2.14.11.5.1.88.0.15Integer32 (1..65535)accessible-for-notifycurrent
hpicfRpvstNewPortRole
OBJECT-TYPE
new port state
1.3.6.1.4.1.11.2.14.11.5.1.88.0.16Integer32 (1..65535)accessible-for-notifycurrent
hpicfRpvstTopoChangeTime
OBJECT-TYPE
topo change time
1.3.6.1.4.1.11.2.14.11.5.1.88.0.17DateAndTimeaccessible-for-notifycurrent
hpicfRpvstObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.1
hpicfRpvstGeneralGroup
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.1.1
hpicfRpvstResetCounters
OBJECT-TYPE
Setting this object to true(1) will reset all the RPVST counters. Setting this to false(2) is no operation.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.1TruthValueread-writecurrent
hpicfRpvstExtendedSystemID
OBJECT-TYPE
Indicates whether Extended System ID feature is enabled or not.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.2TruthValueread-writecurrent
hpicfRpvstIgnorePVIDInconsistency
OBJECT-TYPE
Setting this object to True(1) will enable RPVST to run on mismatched PVID links.Once set it will apply to all RPVST instances
1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.3TruthValueread-writecurrent
hpicfRpvstPathCostMode
OBJECT-TYPE
hpicfRpvstPathCostMode controls which pathcost mode to use. A device can function in one of the 2 modes defined below. pathCost8021d - The device calculates the default path cost for ports based on IEEE 802.1d. pathCost8021t - The device calculates the default path cost for ports based on IEEE 802.1t. proprietary -The device calculates the default path cost for ports based on the proprietary standard. Link Speed Vs Pathcost Table ---------------------------------------------------------- |Link speed| Pathcost in | Pathcost in | Pathcost in | | | IEEE802.1d | IEEE 802.1t | private standard| ---------------------------------------------------------- | 0 | 65535 | 200,000,000 | 200,000 | ---------------------------------------------------------- | 10 Mbps | 100 | 2,000,000 | 2,000 | ---------------------------------------------------------- | 100 Mbp | 19 | 200,000 | 200 | ---------------------------------------------------------- | 1000 Mbp | 4 | 20,000 | 20 | ---------------------------------------------------------- | 10 Gbps | 2 | 2,000 | 2 | ----------------------------------------------------------
1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.5INTEGER {pathCost8021d(1), pathCost8021t(2), proprietary(3)}read-writecurrent
hpicfRpvstVlanTable
OBJECT-TYPE
Information describing the RPVST configuration and statistics of the VLANs.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2not-accessiblecurrent
hpicfRpvstVlanEntry
OBJECT-TYPE
Information describing the RPVST configuration and statistics of each of the VLANs.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1not-accessiblecurrent
hpicfRpvstVlanId
OBJECT-TYPE
A VLAN ID to uniquely identifying the entries.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.1VlanIndexnot-accessiblecurrent
hpicfRpvstVlanHelloTime
OBJECT-TYPE
The amount of time between the transmission of configuration BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.2Integer32 (1..10)read-writecurrent
hpicfRpvstVlanForwardDelay
OBJECT-TYPE
The amount of time between transitioning from listening to learning and learning to forwarding by this node on any port when it is acting as a root for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.3Integer32 (4..30)read-writecurrent
hpicfRpvstVlanMaxAge
OBJECT-TYPE
The maximum age of RPVST information learned from the network on any port before it is discarded.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.4Integer32 (6..40)read-writecurrent
hpicfRpvstVlanPriority
OBJECT-TYPE
The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value dot1dBridgeBaseAddress.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.5Integer32 (0..65535)read-writecurrent
hpicfRpvstVlanRoot
OBJECT-TYPE
To explicitly configure this switch to be primary/secondary root for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.6INTEGER {none(0), primary(1), secondary(2)}read-writecurrent
hpicfRpvstVlanRpvstStatus
OBJECT-TYPE
To enable/disable RPVST on the VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.7INTEGER {enabled(1), disabled(2)}read-writecurrent
hpicfRpvstVlanResetCounters
OBJECT-TYPE
Setting this object to true(1) will reset the RPVST counters for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.8TruthValueread-writecurrent
hpicfRpvstVlanOperHelloTime
OBJECT-TYPE
The amount of time between the transmission of BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN. This is the actual value that this bridge is using.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.9Integer32 (1..10)read-onlycurrent
hpicfRpvstVlanRootPriority
OBJECT-TYPE
The priority of root bridge in this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.10Integer32 (0..65535)read-onlycurrent
hpicfRpvstVlanRootPort
OBJECT-TYPE
The root port for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.11Integer32 (1..65535)read-onlycurrent
hpicfRpvstVlanRootPathCost
OBJECT-TYPE
The path cost to the Root from this bridge in this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.12Integer32 (1..200000000)read-onlycurrent
hpicfRpvstVlanRootMacAddress
OBJECT-TYPE
MAC address of the Root in this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.13MacAddressread-onlycurrent
hpicfRpvstVlanRootChangeCounter
OBJECT-TYPE
The number of times the root has changed for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.14Counter32read-onlycurrent
hpicfRpvstVlanTimeSinceLastTopoChange
OBJECT-TYPE
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.15TimeTicksread-onlycurrent
hpicfVlanTopoChangeCount
OBJECT-TYPE
The total number of topology changes detected by this bridge in this VLAN since the management entity was last reset or initialized.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.16Counter32read-onlycurrent
hpicfRpvstSendTopoChangeCtrl
OBJECT-TYPE
Setting this object to true(1) will enable sending of SNMP notifications for all topology change events on this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.17TruthValueread-writecurrent
hpicfRpvstLogPortStateTransitions
OBJECT-TYPE
Setting this object to true(1) will enable event logging of PVST port state transitions for this VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.18TruthValueread-writecurrent
hpicfRpvstPortTable
OBJECT-TYPE
Information describing the RPVST specific configuration and statistics of the ports.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3not-accessiblecurrent
hpicfRpvstPortEntry
OBJECT-TYPE
Information describing the RPVST specific configuration and statistics of the ports.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1not-accessiblecurrent
hpicfRpvstPortIndex
OBJECT-TYPE
The port number
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfRpvstPortAdminEdge
OBJECT-TYPE
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. Note that even when this object's value is true(1), the hpicfRpvstOperEdgePort can be false(2) if a BPDU has been received.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.2TruthValueread-writecurrent
hpicfRpvstPortAdminPointToPoint
OBJECT-TYPE
Refer the PointToPoint textual-convention.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.3PointToPointread-writecurrent
hpicfRpvstPortAutoEdge
OBJECT-TYPE
It is used by the Bridge detection state machine for the automatic identification of edge ports.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.4TruthValueread-writecurrent
hpicfRpvstPortBpduFiltering
OBJECT-TYPE
This value indicates whether or not BPDUs need to be filtered on this port. If the value is true(1) the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false (2) the BPDUs will be processed as usual.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.5TruthValueread-writecurrent
hpicfRpvstPortRestrictedTcn
OBJECT-TYPE
This value indicates whether or not to propagate topology changes to other ports. true(1) causes the port not to propagate topology changes to other ports.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.6TruthValueread-writecurrent
hpicfRpvstPortRootGuard
OBJECT-TYPE
Setting this object to true(1) forces port to not to be selected as root port even if this port has best spanning-tree.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.7TruthValueread-writecurrent
hpicfRpvstPortLoopGuard
OBJECT-TYPE
Setting this object to true(1) causes the forwarding port to move to the blocking state and prevent the blocking port to move to forwarding state when no BPDUs are received, instead goes to loop inconsistent state.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.8TruthValueread-writecurrent
hpicfRpvstPortBpduProtection
OBJECT-TYPE
Setting this true (1) indicates that no BPDUs are expected to be received on this port. At the reception of BPDUs the BPDU protection mechanism will disable this port and port will transition into bpduError state.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.9TruthValueread-writecurrent
hpicfRpvstPortIeeeRstBpdu
OBJECT-TYPE
The hpicfRpvstPortIeeeRstBpdu controls, on a per port basis, whether or not IEEE RST BPDUs will be transmitted and received on VLANs that the port is an untagged member of. The value true(1) means that the port will allow transmission and reception of IEEE RST BPDUs on ports untagged to a VLAN while false(2) means it will not.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.10TruthValueread-writecurrent
hpicfRpvstPortVlanTable
OBJECT-TYPE
Information describing the RPVST configuration and statistics of the ports in the given VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4not-accessiblecurrent
hpicfRpvstPortVlanEntry
OBJECT-TYPE
Information describing the RPVST configuration and statistics of the ports in the given VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1not-accessiblecurrent
hpicfRpvstPortVlanPathCost
OBJECT-TYPE
The contribution of this port to the path cost of paths towards the root which include this port. auto(0)
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.1Integer32 (0..200000000)read-writecurrent
hpicfRpvstPortVlanPriority
OBJECT-TYPE
The value of the port priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.2Integer32 (0..255)read-writecurrent
hpicfRpvstPortVlanResetCounters
OBJECT-TYPE
Setting this object to true(1) will reset the RPVST counters for this port-vlan pair. Get on this object will always return false(2)
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.3TruthValueread-writecurrent
hpicfRpvstPortVlanRole
OBJECT-TYPE
Role played by the port in a given VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.4StpPortRoleread-onlycurrent
hpicfRpvstPortVlanState
OBJECT-TYPE
The port's current state. This state controls what action a port takes on reception of a frame.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.5INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6), bpduError(7), loopInconsistent(8), pvidInconsistent(9), rootGuard(10)}read-onlycurrent
hpicfRpvstPortVlanDesigBridge
OBJECT-TYPE
The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.6MacAddressread-onlycurrent
hpicfRpvstPortVlanOperPointToPoint
OBJECT-TYPE
true : This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.7TruthValueread-onlycurrent
hpicfRpvstPortVlanOperEdge
OBJECT-TYPE
The operational status of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.8TruthValueread-onlycurrent
hpicfRpvstPortVlanInconsistencyReason
OBJECT-TYPE
The reason for which port is blocked by spanning tree protection function.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.9INTEGER {rootProtected(1), loopProtected(2), inconsistentPvidprotected(3)}read-onlycurrent
hpicfRpvstPortVlanRxCountersTable
OBJECT-TYPE
A table which contains information about each port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5not-accessiblecurrent
hpicfRpvstPortVlanRxCountersEntry
OBJECT-TYPE
Statistics for each port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1not-accessiblecurrent
hpicfRpvstPortVlanRpvstBpduRx
OBJECT-TYPE
The number of RPVST BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.1Counter32read-onlycurrent
hpicfRpvstPortVlanRpvstBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanRpvstBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.2DateAndTimeread-onlycurrent
hpicfRpvstPortVlanRstBpduRx
OBJECT-TYPE
The number of RSTP BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.3Counter32read-onlycurrent
hpicfRpvstPortVlanRstBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanRstBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.4DateAndTimeread-onlycurrent
hpicfRpvstPortVlanConfigBpduRx
OBJECT-TYPE
The number of STP config BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.5Counter32read-onlycurrent
hpicfRpvstPortVlanConfigBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanConfigBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.6DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcnBpduRx
OBJECT-TYPE
The number of Topology Change Notification BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.7Counter32read-onlycurrent
hpicfRpvstPortVlanTcnBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcnBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.8DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcDetectCount
OBJECT-TYPE
The number of times Topology Change detected on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.9Counter32read-onlycurrent
hpicfRpvstPortVlanTcDetectCountLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcDetectCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.10DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcFlagRx
OBJECT-TYPE
The number of times Topology Change bit was set in the BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.11Counter32read-onlycurrent
hpicfRpvstPortVlanTcFlagRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcFlagRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.12DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcAckFlagRx
OBJECT-TYPE
The number of times TC-ACK bit was set in the BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.13Counter32read-onlycurrent
hpicfRpvstPortVlanTcAckFlagRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcAckFlagRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.14DateAndTimeread-onlycurrent
hpicfRpvstPortVlanStarvedBpduCount
OBJECT-TYPE
The number of times BPDU was not received at scheduled time on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.15Counter32read-onlycurrent
hpicfRpvstPortVlanStarvedBpduCountLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanStarvedBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.16DateAndTimeread-onlycurrent
hpicfRpvstPortVlanInvalidBpduRx
OBJECT-TYPE
The number of invalid BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.17Counter32read-onlycurrent
hpicfRpvstPortVlanInvalidBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanInvalidBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.18DateAndTimeread-onlycurrent
hpicfRpvstPortVlanLoopedBackBpduRx
OBJECT-TYPE
The number of times a BPDU is received on the same port from where it was sent on the same VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.19Counter32read-onlycurrent
hpicfRpvstPortVlanLoopedBackBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanLoopedBackBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.20DateAndTimeread-onlycurrent
hpicfRpvstPortVlanErrantBpduRxCount
OBJECT-TYPE
The number of BPDUs received on a BPDU-filtering or BPDU-protected enabled port.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.21Counter32read-onlycurrent
hpicfRpvstPortVlanErrantBpduRxCountLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanErrantBpduRxCount counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.22DateAndTimeread-onlycurrent
hpicfRpvstPortVlanAgedBpduRx
OBJECT-TYPE
The number of aged BPDUs received on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.23Counter32read-onlycurrent
hpicfRpvstPortVlanAgedBpduRxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanAgedBpduRx counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.24DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTxCountersTable
OBJECT-TYPE
A table which contains statistics for each port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6not-accessiblecurrent
hpicfRpvstPortVlanTxCountersEntry
OBJECT-TYPE
A list of statistics for each port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1not-accessiblecurrent
hpicfRpvstPortVlanRpvstBpduTx
OBJECT-TYPE
The number of RPVST BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.1Counter32read-onlycurrent
hpicfRpvstPortVlanRpvstBpduTxLastUpdated
OBJECT-TYPE
The time when hpicfRpvstPortVlanBpduTx counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.2DateAndTimeread-onlycurrent
hpicfRpvstPortVlanRstBpduTx
OBJECT-TYPE
The number of RSTP BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.3Counter32read-onlycurrent
hpicfRpvstPortVlanRstBpduTxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanRstBpduTx was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.4DateAndTimeread-onlycurrent
hpicfRpvstPortVlanConfigBpduTx
OBJECT-TYPE
The number of STP config BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.5Counter32read-onlycurrent
hpicfRpvstPortVlanConfigBpduTxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanConfigBpduTx counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.6DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcnBpduTx
OBJECT-TYPE
The number of Topology Change Notification BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.7Counter32read-onlycurrent
hpicfRpvstPortVlanTcnBpduTxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcnBpduTx counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.8DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcFlagTx
OBJECT-TYPE
The number of times Topology Change bit was set in BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.9Counter32read-onlycurrent
hpicfRpvstPortVlanTcFlagTxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcFlagTx counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.10DateAndTimeread-onlycurrent
hpicfRpvstPortVlanTcAckFlagTx
OBJECT-TYPE
The number of times TC-ACK bit was set in BPDUs sent on this port-vlan pair.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.11Counter32read-onlycurrent
hpicfRpvstPortVlanTcAckFlagTxLastUpdated
OBJECT-TYPE
Time when hpicfRpvstPortVlanTcAckFlagTx Counter was last updated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.12DateAndTimeread-onlycurrent
hpicfRpvstVlanRootHistoryTable
OBJECT-TYPE
A table containing the information describing the RPVST root history for each VLAN.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.7not-accessiblecurrent
hpicfRpvstVlanRootHistoryEntry
OBJECT-TYPE
History of the Roots for the VLANs.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1not-accessiblecurrent
hpicfRpvstVlanRootHistoryIndex
OBJECT-TYPE
An index which uniquely identifies a row in root history table.The lowest numerical index always holds the most recent root entry.Currently last 10 entries are supported.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.1Integer32 (1..100)not-accessiblecurrent
hpicfRpvstVlanRootBridgeId
OBJECT-TYPE
Root bridge Id consisting of Root priority and Root MAC address.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.2BridgeIdread-onlycurrent
hpicfRpvstVlanRootHistoryTime
OBJECT-TYPE
Time when a new root was elected.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.3DateAndTimeread-onlycurrent
hpicfRpvstVlanTopologyChangeRxTable
OBJECT-TYPE
A list of entries,one for every topology change event that the switch received on per vlan basis. This table holds entries for last 10 topology change events received on the switch.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8not-accessiblecurrent
hpicfRpvstVlanTopologyChangeRxEntry
OBJECT-TYPE
Set of parameters corresponding to topology change event that the switch received on per vlan basis.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1not-accessiblecurrent
hpicfRpvstVlanTopologyChangeRxIndex
OBJECT-TYPE
An index which uniquely identifies a row in VLAN TC history table. Currently only last 10 entries are supported.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfRpvstVlanTopologyChangeRxTime
OBJECT-TYPE
Time at which topology change event was received .
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.2DateAndTimeread-onlycurrent
hpicfRpvstVlanTopologyChangeRxMacAddress
OBJECT-TYPE
MAC address form which TC change is received.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.3MacAddressread-onlycurrent
hpicfRpvstVlanTopologyChangeRxPortId
OBJECT-TYPE
Port on which an RPVST topology change message is recieved.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.4Integer32read-onlycurrent
hpicfRpvstVlanTopologyChangeTxTable
OBJECT-TYPE
A list of entries,one for every topology change event that switch originated on per vlan basis . This table holds for last 10 topology change events originated on switch
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9not-accessiblecurrent
hpicfRpvstVlanTopologyChangeTxEntry
OBJECT-TYPE
Set of parameters corresponding to topology change event that switch originated on per vlan basis.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1not-accessiblecurrent
hpicfRpvstVlanTopologyChangeTxIndex
OBJECT-TYPE
Agent assigned index to uniquely identify an entry in this table. The lowest numerical index always holds the most recent topoogy change event entry. Currently only last 10 entries are supported.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfRpvstVlanTopologyChangeTxCurrentPortRole
OBJECT-TYPE
Current port Role in the topology.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.2StpPortRoleread-onlycurrent
hpicfRpvstVlanTopologyChangeTxPreviousPortRole
OBJECT-TYPE
Previous port Role in the topology
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.3StpPortRoleread-onlycurrent
hpicfRpvstVlanTopologyChangeTxTime
OBJECT-TYPE
Time at which topology change event was generated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.4DateAndTimeread-onlycurrent
hpicfRpvstVlanTopologyChangeTxPortId
OBJECT-TYPE
Port on which an RPVST topology change message originated.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.5Integer32read-onlycurrent
hpicfRpvstPortRoleChangeTable
OBJECT-TYPE
A table containing the information describing the RPVST port change history.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10not-accessiblecurrent
hpicfRpvstPortRoleChangeEntry
OBJECT-TYPE
History of the port change state.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1not-accessiblecurrent
hpicfRpvstPortRoleChangeIndex
OBJECT-TYPE
An index which uniquely identifies a row in port role change table. Currently only last 10 entries are supported.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfRpvstPortRoleChangeCurrentPortRole
OBJECT-TYPE
Current port Role.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.2StpPortRoleread-onlycurrent
hpicfRpvstPortRoleChangePreviousPortRole
OBJECT-TYPE
Previous port Role .
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.3StpPortRoleread-onlycurrent
hpicfRpvstPortRoleChangeTime
OBJECT-TYPE
Time when port role changed took place.
1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.4DateAndTimeread-onlycurrent
hpicfRpvstConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.2
hpicfRpvstGroups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1
hpicfRpvstCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.88.2.2

Notifications

NameOIDStatus
hpicfRpvstErrantBpduReceived
NOTIFICATION-TYPE
This trap generated when an unexpected (errant) BPDU has been received on a port. hpicfRpvstVlanIndex - VLAN instance to which BPDU belongs. hpicfRpvstPortNumber - Port ID on which BPDU received. hpicfRpvstPortVlanErrantBpduRxCount - Total number of errant BPDU received on the port which belongs to VLAN hpicfRpvstVlanId. hpicfRpvstPortState - State of this port. hpicfRpvstPortVlanDesigBridge - Designated Bridge that transmitted this BPDU. hpicfRpvstDesignatedPort - Designated port of the Bridge that transmitted this BPDU. hpicfRpvstErrantBpduSrcMac- Source MAC address of the port sending this Errant trap. hpicfRpvstErrantBpduDetector - The identifier of the feature generating Errant BPDU Trap.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.11current
hpicfRpvstNewRoot
NOTIFICATION-TYPE
Trap generated when sending agent has become the new root of spanning Tree for the specified VLAN; the notification is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. hpicfRpvstVlanIndex - VLAN instance in which new root is elected. hpicfRpvstNewRootBridgeId - Bridge ID of the new root elected. hpicfRpvstPreviousRootBridgeId - Bridge ID of the previous root. hpicfRpvstRootBridgeChangeTimeStamp - Time when the root bridge changed.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.12current
hpicfRpvstRootGuardInconsistency
NOTIFICATION-TYPE
Trap generated when a Root Guard feature enabled port receives superior BPDUs on its interface for a given VLAN instance. hpicfRpvstVlanIndex - Vlan Instance to which BPDU belongs. hpicfRpvstPortNumber - Port ID where root-inconsistency occurred. hpicfRpvstSuperiorBpduSrcMac - The source MAC address of the port sending superior BPDU. hpicfRpvstSuperiorBpduSrcPort - Port belonging to the Bridge, which transmitted the superior BPDU.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.13current
hpicfRpvstLoopGuardInconsistency
NOTIFICATION-TYPE
Trap generated when a Loop Guard feature enabled port stops receiving BPDUs from its designated port for a given VLAN instance but keeps the port in blocked state. hpicfRpvstVlanIndex - Vlan Instance in which no BPDU received. hpicfRpvstPortNumber - Port ID where loop-inconsistency occurred. hpicfRpvstPortVlanDesigBridge - Designated Bridge this port was expecting to receive the BPDU.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.14current
hpicfRpvstTopologyChange
NOTIFICATION-TYPE
Trap generated whenever topology change detected on this port- vlan pair. hpicfRpvstVlanIndex - Vlan Instance for which topology change detected. hpicfRpvstPortNumber - Port ID for which topology change detected. hpicfRpvstOldPortRole - Old role of this port before topology change. hpicfRpvstNewPortRole - New state of this port after topology change. hpicfRpvstTopoChangeTime - Time at which the topology change happened for this port.
1.3.6.1.4.1.11.2.14.11.5.1.88.0.18current

Conformance

NameOIDStatus
hpicfRpvstGroup
OBJECT-GROUP
These objects are used for managing/monitoring RPVST global parameters.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.1current
hpicfRpvstVlanGroup
OBJECT-GROUP
These objects are used for managing/monitoring RPVST VLAN parameters.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.2current
hpicfRpvstPortVlanGroup
OBJECT-GROUP
These objects are used for managing/monitoring RPVST port parameters for the VLANs.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.3current
hpicfRpvstPortGroup
OBJECT-GROUP
These objects are used for managing/monitoring RPVST port parameters
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.4deprecated
hpicfRpvstPortVlanCounterGroup
OBJECT-GROUP
Group of port-vlan counter objects.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.5current
hpicfRpvstRootHistoryGroup
OBJECT-GROUP
Group of VLAN Root history objects.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.6current
hpicfRpvstNotificationObjectGrp
OBJECT-GROUP
Group of objects required for notifications.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.7current
hpicfRpvstNotificationGroup
NOTIFICATION-GROUP
Group of notifications.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.8current
hpicfRpvstPvst1
OBJECT-GROUP
Group of object added part of pvst1.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.9current
hpicfRpvstNotificationGroupPvst1
NOTIFICATION-GROUP
Group of notifications.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.10current
hpicfRpvstNotificationObjectGrpPvst1
OBJECT-GROUP
Group of objects required for notifications.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.11current
hpicfRpvstTopologyRxGroup
OBJECT-GROUP
Group of objects required for vlan topo change rx.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.12current
hpicfRpvstTopologyTxGroup
OBJECT-GROUP
Group of objects required for vlan topo change tx.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.13current
hpicfRpvstPortRoleChangeGroup
OBJECT-GROUP
Group of objects required for port role change.
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.14current
hpicfRpvstPortGroup1
OBJECT-GROUP
These objects are used for managing/monitoring RPVST port parameters
1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.15current
hpicfRpvstCompliance1
MODULE-COMPLIANCE
The compliance statement
1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.1deprecated
hpicfRpvstCompliance2
MODULE-COMPLIANCE
The compliance statement
1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.2current
hpicfRpvstCompliance3
MODULE-COMPLIANCE
The compliance statement
1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.3current