HP-ICF-RATE-LIMIT-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.10.2.14
- Last updated
- 2007-08-29 11:20
- Organization
- Hewlett Packard Company, Procurve Networking Business
- Revisions
- 2007-08-29 11:20, 2007-07-27 19:20, 2007-06-01 11:46, 2007-05-30 16:10, 2006-07-07 18:33, 2005-04-20 11:30, 2004-08-22 10:30
- Namespace
- hp
- Source file
HP-ICF-RATE-LIMIT-MIB- Digest
sha256:7df76cbc26a3693ca5ac1eca1fc3ce3a1d568bbcbc5aaf9937da4d4b6b84aad4
Description
This MIB module describes HP rate limit information.
Contact
Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| HP-ICF-OID | hpicfObjectModules, hpicfRateLimitTrapsPrefix |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HP-ICF-OID HP-ICF-RATE-LIMIT-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfRateLimitObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1 | |||
| hpicfICMPRateLimitObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.1 | |||
| hpICMPRateLimitConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1 | |||
| hpICMPRateLimitPortConfigTable OBJECT-TYPE A table that contains configuration objects on ICMP rate limit on a per interface basis. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1 | not-accessible | current | |
| hpICMPRateLimitPortConfigEntry OBJECT-TYPE Entry that contains configuration objects on ICMP rate limit on a per interface basis | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1 | not-accessible | current | |
| hpICMPRateLimitPortConfigIndex OBJECT-TYPE The interface index associated with this entry. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.1 | InterfaceIndex | not-accessible | current |
| hpICMPRateLimitPortState OBJECT-TYPE This object indicates whether ICMP rate limiting is enabled on the corresponding port. Because this is a State object it cannot distinguish between percent-based ICMP Rate-Limiting and the newer Kbps-based ICMP Rate-Limiting. Therefore, it has been deprecated in favor of hpICMPRateLimitPortControlMode. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | deprecated |
| hpICMPRateLimitPortPrct OBJECT-TYPE This indicates the percent of ICMP rate limit on the port. The value of this object must be interpreted under the context of hpICMPRateLimitPortState. A value of 0 is not the same as disabling, but rather all ICMP traffic must be dropped. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.3 | Integer32 (0..100) | read-write | current |
| hpICMPRateLimitPortAlarmFlag OBJECT-TYPE This object indicates whether ICMP rate limiting alarm has been sent. When an alarm is sent, this object is set to set(2). Once a management station changes this object to clear(1), an alarm can be sent again for this port. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4 | INTEGER {clear(1), set(2)} | read-write | current |
| hpICMPRateLimitPortKbps OBJECT-TYPE The maximum Kilobits-per-second of ICMP traffic that may be received inbound on the port. The value of this object must be interpreted under the context of hpICMPRateLimitControlMode. A value of 0 is not the same as disabling, but means instead that all ICMP traffic must be dropped. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.5 | Integer32 (0..10000000) | read-write | current |
| hpICMPRateLimitPortControlMode OBJECT-TYPE The mode by which inbound ICMP traffic on this port will Rate-Limited. If icmpRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If icmpRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per- second rate for the entire port. When ICMP rate-limiting is disabled, there are no maximum controls on inbound ICMP traffic for this port. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6 | INTEGER {disabled(1), portPrct(2), portKbps(3)} | read-write | current |
| hpICMPRateLimitNotifyPortIndex OBJECT-TYPE The interface index associated with hpICMPRateLimitPortNotification event. | 1.3.6.1.4.1.11.2.14.10.2.14.1.1.2 | InterfaceIndex | accessible-for-notify | current |
| hpicfBWMinEgressObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.2 | |||
| hpBWMinEgressPortConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1 | |||
| hpBWMinEgressPortNumQueues OBJECT-TYPE The number of bandwidth minimum egress queues supported on this system. | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.1 | Integer32 | read-only | current |
| hpBWMinEgressPortPrctTable OBJECT-TYPE A table that contains information about the port's egress Guaranteed Minimum Bandwidth percent configurations on this switch. The number of entries in this table is determined by hpBWMinEgressPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinEgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2 | not-accessible | current | |
| hpBWMinEgressPortPrctEntry OBJECT-TYPE The information associated with each port's egress Guaranteed Minimum Bandwidth percent configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1 | not-accessible | current | |
| hpBWMinEgressPortPrctQueue OBJECT-TYPE The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinEgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.1 | Integer32 (1..9000) | not-accessible | current |
| hpBWMinEgressPortPrct OBJECT-TYPE The percentage of Guaranteed Minimum bandwidth to be assigned to this egress queue for this port. Total values for all queues must not exceed 100 percent. | 1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.2 | Integer32 (0..100) | read-write | current |
| hpicfBWMinIngressObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.3 | |||
| hpBWMinIngressPortConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1 | |||
| hpBWMinIngressPortNumQueues OBJECT-TYPE The number of bandwidth minimum ingress queues supported on this system. | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.1 | Integer32 | read-only | current |
| hpBWMinIngressPortPrctTable OBJECT-TYPE A table that contains information about the port's ingress Guaranteed Minimum Bandwidth percent configurations on this switch. The number of entries in this table is determined by hpBWMinIngressPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinIngressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2 | not-accessible | current | |
| hpBWMinIngressPortPrctEntry OBJECT-TYPE The information associated with each port's ingress Guaranteed Minimum Bandwidth percent configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1 | not-accessible | current | |
| hpBWMinIngressPortPrctQueue OBJECT-TYPE The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinIngressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.1 | Integer32 (1..9000) | not-accessible | current |
| hpBWMinIngressPortPrct OBJECT-TYPE The percentage of Guaranteed Minimum bandwidth to be assigned to this ingress queue for this port. Total values for all queues must not exceed 100 percent. | 1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.2 | Integer32 (0..100) | read-write | current |
| hpicfRateLimitPortObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.4 | |||
| hpRateLimitPortConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1 | |||
| hpEgressRateLimitPortNumQueues OBJECT-TYPE The number of egress rate-limiting queues supported on this system. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.1 | Integer32 | read-only | current |
| hpEgressRateLimitPortConfigTable OBJECT-TYPE A table that contains information about the port egress Rate-Limiting configurations on this switch. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2 | not-accessible | current | |
| hpEgressRateLimitPortConfigEntry OBJECT-TYPE The information associated with each port's egress Rate-Limiting configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1 | not-accessible | current | |
| hpEgressRateLimitPortIndex OBJECT-TYPE The ifIndex value which uniquely identifies a row in the Interfaces Table. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.1 | InterfaceIndex | not-accessible | current |
| hpEgressRateLimitPortControlMode OBJECT-TYPE The mode by which this port will be Rate-Limited on egress. If egressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If egressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If egressRateLimitPerPortOnlyBpsMode is configured, there will be a single maximum bits-per-second rate for the entire port. If egressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If egressRateLimitPerQueueBpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in bits-per-second (again, the sum of these values must not exceed the maximum Bytes-per-second capability of the network link). The queues are defined under hpEgressRateLimitPortPrctTable. When egress rate-limiting is disabled, there are no maximum controls on egress for this port. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2 | INTEGER {disabled(1), egressRateLimitPerPortOnly(2), egressRateLimitPerQueue(3), egressRateLimitPerPortOnlyBpsMode(4), egressRateLimitPerQueueBpsMode(5), egressRateLimitPerPortOnlyKbpsMode(6)} | read-write | current |
| hpEgressRateLimitPortSingleControlPrct OBJECT-TYPE When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.3 | Integer32 (0..100) | read-write | current |
| hpEgressRateLimitPortSingleControlBps OBJECT-TYPE When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnlyBpsMode, this value is the maximum bits-per-second of traffic that may be transmitted by this port on egress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.4 | Unsigned32 (0..4200000000) | read-write | deprecated |
| hpEgressRateLimitPortSingleControlKbps OBJECT-TYPE When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of traffic that may be transmitted by this port on egress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.5 | Integer32 (0..10000000) | read-write | current |
| hpEgressRateLimitPortPrctTable OBJECT-TYPE A table that contains information about the port egress Rate-Limiting percent configurations on this switch. The number of entries in this table is determined by hpEgressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpEgressRateLimitPortNumQueues being the highest priority. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3 | not-accessible | current | |
| hpEgressRateLimitPortPrctEntry OBJECT-TYPE The information associated with each port's egress Rate-Limiting percent configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1 | not-accessible | current | |
| hpEgressRateLimitPortPrctQueue OBJECT-TYPE The queue associated with this entry. The priority o of the queues is in ascending order, starting with queue one being the lowest and queue hpEgressRateLimitgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.1 | Integer32 (1..9000) | not-accessible | current |
| hpEgressRateLimitPortPrct OBJECT-TYPE The maximum percentage of traffic that may be transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use egressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that egress queue. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.2 | Integer32 (0..100) | read-write | current |
| hpEgressRateLimitPortBpsTable OBJECT-TYPE A table that contains information about the port egress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined by hpEgressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpEgressRateLimitPortNumQueues being the highest priority queue. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4 | not-accessible | deprecated | |
| hpEgressRateLimitPortBpsEntry OBJECT-TYPE The information associated with each port's egress Rate-Limiting bits-per-second configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1 | not-accessible | deprecated | |
| hpEgressRateLimitPortBpsQueue OBJECT-TYPE The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpEgressRateLimitgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.1 | Integer32 (1..64) | not-accessible | deprecated |
| hpEgressRateLimitPortBps OBJECT-TYPE The maximum bits-per-second of traffic that may be transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use egressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that egress queue. The values for each queue must not exceed the bits-per-second capability of the current network link speed. | 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.2 | Unsigned32 (0..4200000000) | read-write | deprecated |
| hpicfIngressRateLimitPortObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.5 | |||
| hpRateLimitIngressPortConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1 | |||
| hpIngressRateLimitPortNumQueues OBJECT-TYPE The number of ingress rate-limiting queues supported on this system. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.1 | Integer32 | read-only | current |
| hpIngressRateLimitPortConfigTable OBJECT-TYPE A table that contains information about the port ingress Rate-Limiting configurations on this switch. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2 | not-accessible | current | |
| hpIngressRateLimitPortConfigEntry OBJECT-TYPE The information associated with each port's ingress Rate-Limiting configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1 | not-accessible | current | |
| hpIngressRateLimitPortIndex OBJECT-TYPE The ifIndex value which uniquely identifies a row in the Interfaces Table. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.1 | InterfaceIndex | not-accessible | current |
| hpIngressRateLimitPortControlMode OBJECT-TYPE The mode by which this port will be Rate-Limited on ingress. If ingressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If ingressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If ingressRateLimitPerPortOnlyBpsMode is configured, there will be a single maximum bits-per-second rate for the entire port. If ingressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If ingressRateLimitPerQueueBpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in bits-per-second (again, the sum of these values must not exceed the maximum Bytes-per-second capability of the network link). The queues are defined under hpIngressRateLimitPortPrctTable. When ingress rate-limiting is disabled, there are no maximum controls on ingress for this port. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.2 | INTEGER {disabled(1), ingressRateLimitPerPortOnly(2), ingressRateLimitPerQueue(3), ingressRateLimitPerPortOnlyBpsMode(4), ingressRateLimitPerQueueBpsMode(5), ingressRateLimitPerPortOnlyKbpsMode(6)} | read-write | current |
| hpIngressRateLimitPortSingleControlPrct OBJECT-TYPE When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.3 | Integer32 (0..100) | read-write | current |
| hpIngressRateLimitPortSingleControlBps OBJECT-TYPE When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnlyBpsMode, this value is the maximum bits-per-second of traffic that may be transmitted by this port on ingress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.4 | Unsigned32 (0..4200000000) | read-write | deprecated |
| hpIngressRateLimitPortSingleControlKbps OBJECT-TYPE When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of traffic that may be transmitted by this port on ingress. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.5 | Integer32 (0..10000000) | read-write | current |
| hpIngressRateLimitPortPrctTable OBJECT-TYPE A table that contains information about the port ingress Rate-Limiting percent configurations on this switch. The number of entries in this table is determined by hpIngressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpIngressRateLimitPortNumQueues being the highest priority. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3 | not-accessible | current | |
| hpIngressRateLimitPortPrctEntry OBJECT-TYPE The information associated with each port's ingress Rate-Limiting percent configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1 | not-accessible | current | |
| hpIngressRateLimitPortPrctQueue OBJECT-TYPE The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpIngressRateLimitgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.1 | Integer32 (1..9000) | not-accessible | current |
| hpIngressRateLimitPortPrct OBJECT-TYPE The maximum percentage of traffic that may be transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that ingress queue. The values for each queue must not exceed 100 percent. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.2 | Integer32 (0..100) | read-write | current |
| hpIngressRateLimitPortBpsTable OBJECT-TYPE A table that contains information about the port ingress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined by hpIngressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpIngressRateLimitPortNumQueues being the highest priority queue. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4 | not-accessible | deprecated | |
| hpIngressRateLimitPortBpsEntry OBJECT-TYPE The information associated with each port's egress Rate-Limiting bits-per-second configuration. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1 | not-accessible | deprecated | |
| hpIngressRateLimitPortBpsQueue OBJECT-TYPE The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpIngressRateLimitgressPortNumQueues being the highest. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.1 | Integer32 (1..64) | not-accessible | deprecated |
| hpIngressRateLimitPortBps OBJECT-TYPE The maximum bits-per-second of traffic that may be transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that ingress queue. The values for each queue must not exceed the bits-per-second capability of the current network link speed. | 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2 | Unsigned32 (0..4200000000) | read-write | deprecated |
| hpicfRateLimitConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.2 | |||
| hpicfRateLimitGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.2.1 | |||
| hpicfRateLimitCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.10.2.14.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpICMPRateLimitPortNotification NOTIFICATION-TYPE This notification indicates limit has exceeded. | 1.3.6.1.4.1.11.2.14.12.5.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hpICMPRateLimitPortConfigGroup OBJECT-GROUP A collection of objects providing configuration to ICMP rate limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.1 | deprecated |
| hpICMPRateLimitPortNotifyGroup NOTIFICATION-GROUP A collection of notifications used to indicate ICMP rate limiting on an interface events. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.2 | current |
| hpBWMinIngressPortConfigGroup OBJECT-GROUP A collection of objects providing configuration to Guaranteed Minimum ingress bandwidth on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.3 | current |
| hpBWMinEgressPortConfigGroup OBJECT-GROUP A collection of objects providing configuration to Guaranteed Minimum egress bandwidth on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.4 | current |
| hpEgressRateLimitPortConfigGroup OBJECT-GROUP A collection of objects providing configuration to Egress Rate-Limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.5 | deprecated |
| hpIngressRateLimitPortConfigGroup OBJECT-GROUP A collection of objects providing configuration to Ingress Rate-Limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.6 | deprecated |
| hpICMPRateLimitPortConfigGroup2 OBJECT-GROUP This replaces the deprecated hpICMPRateLimitPortConfigGroup. A collection of objects providing configuration to ICMP rate limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.7 | current |
| hpEgressRateLimitPortConfigGroup2 OBJECT-GROUP This replaces the deprecated hpEgressRateLimitPortConfigGroup. A collection of objects providing configuration to Egress Rate-Limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.8 | current |
| hpIngressRateLimitPortConfigGroup2 OBJECT-GROUP This replaces the deprecated hpIngressRateLimitPortConfigGroup. A collection of objects providing configuration to Ingress Rate-Limiting on an interface. | 1.3.6.1.4.1.11.2.14.10.2.14.2.1.9 | current |
| hpicfRateLimitCompliance MODULE-COMPLIANCE The compliance statement for devices support of HP-ICF-RATE-LIMIT MIB. | 1.3.6.1.4.1.11.2.14.10.2.14.2.2.1 | deprecated |
| hpicfRateLimitCompliance1 MODULE-COMPLIANCE The compliance statement for devices support of HP-ICF-RATE-LIMIT MIB. | 1.3.6.1.4.1.11.2.14.10.2.14.2.2.2 | current |