HP-ICF-PROVIDER-BRIDGE
- Registered at
- 1.3.6.1.4.1.11.2.14.11.5.1.40
- Last updated
- 2006-08-15 00:00
- Organization
- Hewlett-Packard Company Procurve Networking Business
- Revisions
- 2006-08-15 00:00
- Namespace
- hp
- Source file
HP-ICF-PROVIDER-BRIDGE- Digest
sha256:8aefcde396bd87e91f8e4f4f92de2dcd36ebfc71c777f7a0df82f13e17cfcc67
Description
This MIB module contains the HP 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
Contact
Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| HP-ICF-OID | hpSwitch |
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | dot1qVlanStaticEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB HP-ICF-OID HP-ICF-PROVIDER-BRIDGE IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfProviderBridgeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.40.1 | |||
| hpicfProviderBridgeBase OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1 | |||
| hpicfProviderBridgeType OBJECT-TYPE hpicfProviderBridgeType controls bridge mode configuration. A device can function in one of the 4 modes defined above. vlanBridge - provider bridge feature disabled mode, all vlans are cvlans. svlanBridge - provider bridge mode with only svlans. providerEdgeBridge - provider bridge mode with cvlans and svlans and mappings between them. vlanSvlanBridge - provider bridge mode with independent cvlans and svlans on the same device. Changing from one mode to another will empty out the current configuration information and reboot the device. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.1 | INTEGER {vlanBridge(1), svlanBridge(2), providerEdgeBridge(3), vlanSvlanBridge(4)} | read-write | current |
| hpicfProviderBridgeEtherType OBJECT-TYPE Defines the 2-byte ethertype for provider tagged frames. The default is 0x88a8. Changing from one tag-type to another with a given hpicfProviderBridgeType configuration will reboot the device and the new tag-type will take effect subsequently. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.2 | INTEGER (1536..65535) | read-write | current |
| hpicfProviderBridgeVlanTypeTable OBJECT-TYPE HP proprietaty extension to dot1qVlanStaticTable to classify a vlan as a cvlan or an svlan | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3 | not-accessible | current | |
| hpicfProviderBridgeVlanTypeEntry OBJECT-TYPE An entry for HP Specific extension table | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1 | not-accessible | current | |
| hpicfProviderBridgeVlanType OBJECT-TYPE Indicates the vlantype. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1.1 | INTEGER {cvlan(1), svlan(2)} | read-write | current |
| hpicfProviderBridgePortTable OBJECT-TYPE This specifies the designated type of an externally accessible port on a Provider Bridge. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4 | not-accessible | current | |
| hpicfProviderBridgePortEntry OBJECT-TYPE An entry that specifies the designated type of an externally accessible port on a Provider Bridge. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1 | not-accessible | current | |
| hpicfProviderBridgePortType OBJECT-TYPE The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers. | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1 | INTEGER {customer-edge(1), customer-network(2), provider-network(3)} | read-write | current |
| hpicfProviderBridgeConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.40.2 | |||
| hpicfProviderBridgeGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.1 | |||
| hpicfProviderBridgeCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| hpicfProviderBridgeBaseGroup OBJECT-GROUP Basic Provider Bridge configuration information. | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.1.1 | current |
| hpicfProviderBridgeCompliance MODULE-COMPLIANCE The compliance statement for HP Switches with IEEE standard Provider Bridge MIBs. | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.2.1 | current |