HP-ICF-BRIDGE
- Registered at
- 1.3.6.1.4.1.11.2.14.11.5.1.12
- Last updated
- 2010-06-26 00:00
- Organization
- HP Networking
- Revisions
- 2010-06-26 00:00, 2009-12-15 00:00, 2009-02-11 00:00, 2006-09-30 00:00, 2006-09-26 00:00, 2006-08-13 17:38, 2003-02-20 00:00, 2002-05-23 17:38, 2001-10-03 20:50, 2000-11-03 06:42
- Namespace
- hp
- Source file
HP-ICF-BRIDGE- Digest
sha256:f0aab30810a89a09c93a72b40eb80ebd1497172c0c9f7457ce772f34d4624d9b
Description
This MIB module supports loop protect per vlan feature.
Contact
Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dBasePortEntry |
| HP-ICF-FTRCO | VidList |
| HP-ICF-OID | hpSwitch |
| HP-ICF-TC | ConfigStatus |
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | VlanIndex, dot1qVlanStaticEntry |
| SMON-MIB | portCopyEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB HP-ICF-BRIDGE HP-ICF-FTRCO HP-ICF-OID HP-ICF-TC IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SMON-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| LoopProtectReceiverAction TEXTUAL-CONVENTION This TC describes the actions a port that receives a loop protection protocol packet can take. The disableTx(1) enumeration indicates that the sender of the loop protect packet will be disabled. The noDisable(2) enumeration indicates that no port is to be disabled. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpicfBridgeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | |||
| hpicfBridgeBase OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1 | |||
| hpicfBridgeMaxVlans OBJECT-TYPE Defines the number of VLANs that the switch will support for dynamic use without requiring a reboot. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.1 | Integer32 (1..4094) | read-write | current |
| hpicfBridgeVlanEnable OBJECT-TYPE Administrative status of VLAN support on this switch. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpicfBridgePrimaryVlan OBJECT-TYPE The 802.1Q VLAN ID of the primary VLAN for this switch. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.3 | VlanIndex | read-write | current |
| hpicfBridgeVlanConfigStatus OBJECT-TYPE If one or more variables in this group has been reconfigured since the last reboot in such a way as to require a reboot to take effect, the value of this variable will be set to 'notInService'. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.4 | ConfigStatus | read-only | current |
| hpicfBridgeGvrp OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2 | |||
| hpicfBridgeGvrpPortTable OBJECT-TYPE A table that contains information about the GVRP port configurations on this switch. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1 | not-accessible | current | |
| hpicfBridgeGvrpPortEntry OBJECT-TYPE GVRP information associated with a single port. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1 | not-accessible | current | |
| hpicfBridgeGvrpRestrictedVlanReg OBJECT-TYPE Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GVRP will only process protocol packets that concern themselves with known VLANs. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1 | TruthValue | read-write | current |
| hpicfBridgeRstp OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 | |||
| hpicfBridgeRstpForceVersion OBJECT-TYPE Operational mode of Spanning Tree protocol: - stpCompatibility means protocol operates as STP protocol on all ports. - rstpOperation means protocol operates as Rapid Reconfiguration on all ports except on those ports where legacy system has been detected. - mstpOperation means protocol operates in native MSTP mode, this option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 | INTEGER {stpCompatibility(0), rstpOperation(2), mstpOperation(3)} | read-write | current |
| hpicfBridgeRstpConfigStatus OBJECT-TYPE The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.2 | ConfigStatus | read-only | current |
| hpicfBridgeRstpProtocolVersion OBJECT-TYPE The protocol version currently running on switch - ieee8021d version of STP protocol, - ieee8021w Rapid Reconfiguration version of STP protocol, - ieee8021s Multiple STP (MSTP) protocol | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.3 | INTEGER {ieee8021d(0), ieee8021w(2), ieee8021s(3)} | read-write | current |
| hpicfBridgeRstpAdminStatus OBJECT-TYPE The operational status of the spanning tree protocol | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpicfBridgeRstpPortTable OBJECT-TYPE A table that contains port-specific information for the Spanning Tree Protocol. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 | not-accessible | current | |
| hpicfBridgeRstpPortEntry OBJECT-TYPE A list of information maintained by every port about the Spanning Tree Protocol state for that port. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1 | not-accessible | current | |
| hpicfBridgeRstpPortIndex OBJECT-TYPE The port number of the port for which this entry contains Spanning Tree Protocol management information. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1 | Integer32 (1..65535) | read-only | current |
| hpicfBridgeRstpAdminEdgePort OBJECT-TYPE Indicate that port is connected to LAN segment that don't have any bridge connected to it | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| hpicfBridgeRstpOperEdgePort OBJECT-TYPE Reflects the value of the operEdgePort parameter, as defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this parameter is used by a Designated Port in order to determine how rapidly it may transition to the Forwarding Port State (see 17.23, Port Role Transitions state machine). The Bridge Detection state machine sets this parameter to the value of adminEdgePort (P802.1t 18.1.3) on initialization, and forces its value to FALSE if any BPDUs are received on the Port. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3 | INTEGER {enable(1), disable(2)} | read-only | current |
| hpicfBridgeRstpAdminPointToPointMac OBJECT-TYPE forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 | INTEGER {forceTrue(1), forceFalse(2), auto(3)} | read-write | current |
| hpicfBridgeRstpOperPointToPointMac OBJECT-TYPE true: This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5 | TruthValue | read-only | current |
| hpicfBridgeRstpPortPathCost OBJECT-TYPE Rapid Reconfiguration Port Path Cost - 32 bit values | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6 | Integer32 (1..200000000) | read-write | current |
| hpicfBridgeRstpForceBpduMigrationCheck OBJECT-TYPE When operating in RST (version 2 or greater) mode writing TRUE(1) to this object forces this port to transmit RST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7 | TruthValue | read-write | current |
| hpicfBridgeRstpAutoEdgePort OBJECT-TYPE Represents the value of 'autoEdgePort' parameter. This parameter is optional. It is used by the Bridge Detection state machine for the automatic identification of edge ports. The default is false. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8 | TruthValue | read-write | current |
| hpicfBridgeRstpPortBpduFiltering OBJECT-TYPE This value indicates whether or not BPDUs need to be filtered on this port. If the value is true the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false the BPDUs are being processed as usual. The default is false. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9 | TruthValue | read-write | current |
| hpicfBridgeLoopProtect OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5 | |||
| hpicfBridgeLoopProtectNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0 | |||
| hpicfBridgeLoopProtectBase OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1 | |||
| hpicfBridgeLoopProtectInterval OBJECT-TYPE The interval in seconds at which loop protection packets are transmitted. The default value is 5 seconds. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.1 | Integer32 (1..10) | read-write | current |
| hpicfBridgeLoopProtectTrapLoopDetectEnable OBJECT-TYPE Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2). | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.2 | TruthValue | read-write | current |
| hpicfBridgeLoopProtectEnableTimer OBJECT-TYPE The time in seconds to wait before re-enabling a port disabled by loop protection. When a port is disabled by loop protection a re-enable timer for the port is initialized with the value of this period. If the period is not equal to zero the port will be re-enabled after the period has elapsed. Otherwise the port will remain disabled. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 | Integer32 (0..2147483647) | read-write | current |
| hpicfBridgeLoopProtectMode OBJECT-TYPE This value indicate whether loop protect operates in Port or VLAN mode. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.4 | INTEGER {port(1), vlan(2)} | read-write | current |
| hpicfBridgeLoopProtectVIDList OBJECT-TYPE A list of VLANs on which loop protection is enabled. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.5 | VidList | read-write | current |
| hpicfBridgeLoopProtectPort OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2 | |||
| hpicfBridgeLoopProtectPortTable OBJECT-TYPE Per-interface configuration for Loop Protection. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1 | not-accessible | current | |
| hpicfBridgeLoopProtectPortEntry OBJECT-TYPE Loop Protection configuration information for a single port. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1 | not-accessible | current | |
| hpicfBridgeLoopProtectPortEnable OBJECT-TYPE This object indicates whether this port has Loop protection enabled. The default value is FALSE | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1 | TruthValue | read-write | current |
| hpicfBridgeLoopProtectPortLoopDetected OBJECT-TYPE This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's hpicfBridgeLoopProtectPortEnable is set to FALSE. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2 | TruthValue | read-only | current |
| hpicfBridgeLoopProtectPortLastLoopTime OBJECT-TYPE The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3 | TimeStamp | read-only | current |
| hpicfBridgeLoopProtectPortLoopCount OBJECT-TYPE When the loop protect feature is enabled on the port this object counts the number of loops detected on the port. When the feature is disabled on the port the value of this object is set to 0. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4 | Counter32 | read-only | current |
| hpicfBridgeLoopProtectPortReceiverAction OBJECT-TYPE Controls the action taken when a Loop protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet will be disabled. When set to 'noDisable' the transmitting port will not be disabled. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5 | LoopProtectReceiverAction | read-write | current |
| hpicfBridgeLoopDetectedVlan OBJECT-TYPE Refers to this object for the port on which loop is detected. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6 | Integer32 (1..4096) | read-only | current |
| hpicfBridgeMirrorSession OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6 | |||
| hpicfBridgeMirrorSessionBase OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.1 | |||
| hpicfBridgeMirrorSessionDestination OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2 | |||
| hpicfBridgeMirrorSessionTable OBJECT-TYPE This table contains mirror session information related to a given specified destination. A mirror session is a group of one or more portCopyEntries all having the same specified destination. A given specified destination may be associated with more then one mirror session. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1 | not-accessible | current | |
| hpicfBridgeMirrorSessionEntry OBJECT-TYPE An entry in the hpicfBridgeMirrorSessionEntry contains mirror session specific identification information. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1 | not-accessible | current | |
| hpicfBridgeMirrorSessionID OBJECT-TYPE This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1 destination. However, multiple sources may be related to the same hpicfBridgeMirrorSessionID. To ensure that the hpicfBridgeMirrorSessionID is properly assigned, it can only be updated when the respective portCopyEntry object is in the notReady state. For non-mirroring transfers, the value should be set to 0. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1 | Integer32 (0..2147483647) | read-create | current |
| hpicfBridgeDontTagWithVlan OBJECT-TYPE This oid mentions whether VLAN tag is to part of the mirrored copy of the packet. The value 'enabled' denotes that the VLAN tag should not be part of the mirrored copy; 'disabled' does put the VLAN tag in the mirrored copy. Only one logical port is allowed. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hpicfBridgeMirrorSessionType OBJECT-TYPE This oid mentions what is the source type of traffic associated with mirror session. noMirror Not associated with any mirroring. mirrorAddresses Mirror traffic based on addresses mirrorPolicies Mirror traffic based on policies. mirrorPorts Mirror traffic based on ports. mirrorVlan Mirror traffic based on vlan. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3 | INTEGER {noMirror(1), mirrorAddresses(2), mirrorPolicies(3), mirrorPorts(4), mirrorVlan(5)} | read-write | current |
| hpicfBridgeVoiceVlanConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7 | |||
| hpicfBridgeVoiceVlanConfigTable OBJECT-TYPE HP specific extension to dot1qVlanStaticTable to for configuring voice on a vlan. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1 | not-accessible | current | |
| hpicfBridgeVoiceVlanConfigEntry OBJECT-TYPE An entry for HP Specific extension table. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1 | not-accessible | current | |
| hpicfBridgeVoiceVlanEnable OBJECT-TYPE Labels the VLAN as a Voice VLAN which allows to separate, prioritize, and authenticate voice traffic moving through the network. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1 | TruthValue | read-write | current |
| hpicfBridgeJumboInterfaceConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8 | |||
| hpicfBridgeJumboInterfaceConfigTable OBJECT-TYPE This table contains objects for configuring voice on a interface. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1 | not-accessible | current | |
| hpicfBridgeJumboInterfaceConfigEntry OBJECT-TYPE An entry in the hpicfBridgeJumboInterfaceConfigEntry contains jumbo configuration for a interface. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1 | not-accessible | current | |
| hpicfBridgeJumboInterfaceEnable OBJECT-TYPE Labels the interface as a Jumbo Interface which allows to pass packets up to 9220 bytes in size. Currently this configuration is supported only on vlan. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1 | TruthValue | read-write | current |
| hpicfBridgeManagementInterfaceConfig OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9 | |||
| hpicfBridgeManagementInterfaceConfigTable OBJECT-TYPE This table contains objects for configuring interface as Management interface. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1 | not-accessible | current | |
| hpicfBridgeManagementInterfaceConfigEntry OBJECT-TYPE An entry in the hpicfBridgeManagementInterfaceConfigEntry contains objects for configuring interface as management interface. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1 | not-accessible | current | |
| hpicfBridgeManagementInterfaceEnable OBJECT-TYPE Labels the interface as management interface. Currently, only one vlan can be management interface on the switch. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1 | TruthValue | read-write | current |
| hpicfBridgeConformance OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.2 | |||
| hpicfBridgeGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1 | |||
| hpicfBridgeCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2 | |||
| hpicfBridgeNotGroups OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpicfBridgeLoopProtectLoopDetectedNotification NOTIFICATION-TYPE A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop has been detected by the loop protection protocol. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications this trap is rate-limited to allow a maximum of 1 notifications every 30 seconds. Notifications that are not sent due to rate-limiting are dropped, and not queued up to be sent later. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.1 | current |
| hpicfBridgeVlanLoopProtectLoopDetectedNotification NOTIFICATION-TYPE A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop has been detected by the loop protect while operating on a per VLAN mode. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications this trap is rate-limited to allow a maximum of 1 notifications every 30 seconds. Notifications that are not sent due to rate-limiting are dropped, and not queued up to be sent later. | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hpicfBridgeVlanBaseGroup OBJECT-GROUP Basic VLAN configuration information that is not in the standard 802.1Q Bridge MIB. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.1 | current |
| hpicfBridgeGvrpPortGroup OBJECT-GROUP GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.2 | current |
| hpicfBridgeRstpBaseGroup OBJECT-GROUP Rapid Spanning Tree Protocol (RSTP) configuration information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP improves compatibility, some objects in this MIB will likely be deprecated. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.3 | current |
| hpicfBridgeLoopProtectBaseGroup OBJECT-GROUP A collection of objects providing basic instrumentation and control of the HP Loop protection entity. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.4 | current |
| hpicfBridgeMirrorSessionBaseGroup OBJECT-GROUP A collection of objects providing identification of a mirroring session entity. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.5 | current |
| hpicfBridgeVoiceVlanConfigGroup OBJECT-GROUP A collection of objects for voice configuration on vlan. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.7 | current |
| hpicfBridgeJumboInterfaceConfigGroup OBJECT-GROUP A collection of objects providing Jumbo configuration on a interface. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.8 | current |
| hpicfBridgeManagementInterfaceConfigGroup OBJECT-GROUP A collection of objects for management interface configuration. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.9 | current |
| hpicfBridgeLoopProtectVLANGroup OBJECT-GROUP A collection of objects providing support for Loop Protect per VLAN feature. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.10 | current |
| hpicfBridgeRstpPortEntryGroup OBJECT-GROUP A collection of objects providing support for Rstp. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.11 | current |
| hpicfBridgeMirrorSessionEntryGroup OBJECT-GROUP A collection of objects providing mirror session information related to a given specific destination. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.12 | current |
| hpicfBridgeRstpPortEntryGroup1 OBJECT-GROUP A collection of objects providing support for Rstp. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.13 | current |
| hpicfBridgeCompliance MODULE-COMPLIANCE The compliance statement for HP Switches with IEEE 802.1Q VLAN support for bridging objects not found in the standard Bridge MIBs. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.1 | deprecated |
| hpicfBridgeComplianceRevTwo MODULE-COMPLIANCE The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.2 | deprecated |
| hpicfBridgeComplianceRevThree MODULE-COMPLIANCE The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.3 | deprecated |
| hpicfBridgeComplianceRevFour MODULE-COMPLIANCE The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.4 | current |
| hpicfBridgeLoopProtectCompliance MODULE-COMPLIANCE The compliance statement for HP Switches with support for hpicfBridge loop protection objects. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.5 | current |
| hpicfBridgeVlanBaseConfigCompliance MODULE-COMPLIANCE The compliance statement for HP Switches that support basic vlan configuration. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.6 | current |
| hpicfBridgeInterfaceConfigCompliance MODULE-COMPLIANCE The compliance statement for HP Switches that support basic interface configuration. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.7 | current |
| hpicfBridgeVlanLoopProtConfigCompliance MODULE-COMPLIANCE The compliance statement for HP Switches that support loop protect per VLAN feature. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.8 | current |
| hpicfBridgeRstpPortEntryCompliance MODULE-COMPLIANCE The compliance statement for HP Switches that support Rstp. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.9 | current |
| hpicfBridgeMirrorSessionEntryCompliance MODULE-COMPLIANCE The compliance statement for HP Switches that support mirror sessions. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.10 | current |
| hpicfBridgeRstpPortEntryCompliance1 MODULE-COMPLIANCE The compliance statement for HP Switches that support Rstp. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.11 | current |
| hpicfBridgeLoopProtectNotGrp NOTIFICATION-GROUP Notifications for Loop protection. | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.1 | current |
| hpicfBridgeVlanLoopProtectNotGrp NOTIFICATION-GROUP Notifications for Loop protect per VLAN | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.2 | current |