MIBs Depot

HP-AUTH-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.5.1.16
Last updated
2017-09-28 00:00
Organization
HPE Networking
Revisions
2017-09-28 00:00, 2017-05-25 00:00, 2017-03-16 00:00, 2017-01-19 00:00, 2016-11-21 00:00, 2016-11-11 00:00, 2016-07-29 00:00, 2016-06-27 00:00, 2016-02-23 00:00, 2016-01-22 00:00, 2015-10-28 00:00, 2015-07-02 00:00, 2015-05-24 00:00, 2015-04-01 00:00, 2015-03-16 00:00, 2014-08-04 00:00, 2014-03-12 00:00, 2013-11-12 00:00, 2013-06-12 00:00, 2013-05-27 00:00, 2012-05-11 00:00, 2012-05-01 00:00, 2011-06-02 00:00, 2011-02-12 00:00, 2011-02-07 00:00, 2009-06-06 00:00, 2009-06-03 00:00, 2009-04-02 00:00, 2009-02-27 00:00, 2009-01-29 00:00, 2008-07-11 00:00, 2008-06-11 00:00, 2007-09-21 00:00, 2006-10-05 00:00, 2004-09-12 00:00, 2004-03-31 00:12, 2001-08-10 02:38
Namespace
hp
Source file
HP-AUTH-MIB
Digest
sha256:60a3c08633151319dc6a0fcda8b72a2c52e3cb2cb72c24d07546288253c1bae1

Description

This MIB module describes objects for managing the Authentication features of devices in the HP Integrated Communication Facility product line.

Contact

Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747

Imports

FromSymbols
HP-ICF-OIDhpSwitch
INET-ADDRESS-MIBInetAddress, InetAddressType
OSPF-MIBospfIfEntry, ospfVirtIfEntry
RIPv2-MIBrip2IfConfEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-AUTH-MIB
HP-ICF-OID
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
OSPF-MIB
RIPv2-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hpSwitchAuthNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.0
hpSwitchAuthenticationConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.1
hpSwitchNumLoginAttempts
OBJECT-TYPE
The number of login attempts allowed, both per session and within the time of hpSwitchAuthLockoutDelay.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.1Integer32 (1..10)read-writecurrent
hpSwitchAuthRespectPriv
OBJECT-TYPE
This object allows the switch to set privilege level of the session based on the received configuration variable from the authentication server. For RADIUS, the Service-Type attribute's configured value on the server should be 6-Administrative for manager's privilege level, or 7-NAS-prompt for the user/operator privilege level.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.2INTEGER {disabled(1), enabled(2)}read-writecurrent
hpSwitchAuthenticationEncryptCredentialsMethod
OBJECT-TYPE
This object determines the methods used to encrypt passwords configured on this device.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.3INTEGER {none(0), aes256cbc(1)}read-writecurrent
hpSwitchAuthLockoutDelay
OBJECT-TYPE
The number of seconds after repeated login failures before a user may again attempt login, and the period within which login rate is limited. When the value is set 0, the login rate limit feature is disabled.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.4Integer32 (0..3600)read-writecurrent
hpSwitchMinimumPasswordLength
OBJECT-TYPE
Minimum number of permissible characters required to set a new password for manager, operator, or local management privilege user. The exact range of valid values for this object is implementation dependent; consult the product documentation to determine the supported range for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.5Integer32 (0..1024)read-writecurrent
hpSwitchAuthAllowVlanTagged
OBJECT-TYPE
When set to 'true', tagged VLAN membership changes are immediately applied on AAA enabled ports. By default, VLAN changes are postponed when there are authenticated clients connected on the port.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.6TruthValueread-writecurrent
hpSwitchAuthenHideSensitiveData
OBJECT-TYPE
This object enables/disables hiding of the sensitive data in standard secure-mode.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.7INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthUnlockUser
OBJECT-TYPE
The User Name, in ASCII format. The exact size of this object is implementation dependent; the user will be unlocked, if the current state of the user is locked out.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.8OCTET STRING (SIZE(0..1024))read-writecurrent
hpSwitchAuthUserBasedLockout
OBJECT-TYPE
This object enables/disables the user-based-lockout. If this feature is enabled, the lockout is based on username and not based on the IP address.
1.3.6.1.4.1.11.2.14.11.5.1.16.1.9INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthenTable
OBJECT-TYPE
This table lists the authentication methods to be tried for granting different access levels through various access tasks.
1.3.6.1.4.1.11.2.14.11.5.1.16.2not-accessiblecurrent
hpSwitchAuthenEntry
OBJECT-TYPE
An Authentication Method Table Entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1not-accessiblecurrent
hpSwitchAuthenIndex
OBJECT-TYPE
Signifies the access task for which authentication methods are listed in this entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.1INTEGER {console(1), telnet(2), ieee8021X(3), webui(4), ssh(5), webauth(6), macauth(7), snmp(8), localMacAuth(9)}not-accessiblecurrent
hpSwitchAuthenLoginPrimary
OBJECT-TYPE
The value of this object indicates the primary login authentication mechanism. When a user logs in, the authentication method configured by this object will be tried first.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.2INTEGER {local(1), tacacs(2), radius(3), radiusEap(4), radiusChap(5), sshRsa(6), radiusPeapMSChapv2(7), x509Certificate(8), twoFactor(9)}read-writecurrent
hpSwitchAuthenLoginSecondary
OBJECT-TYPE
The value of this object indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in an error.The Local authentication method uses the credential database on the switch. The Authorized authentication method will be granted access without authenticating. The cachedReauth authentication method will grant access in case of reauthentication retaining the current session attributes.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.3INTEGER {local(1), none(2), authorized(3), cachedReauth(4)}read-writecurrent
hpSwitchAuthenEnablePrimary
OBJECT-TYPE
This object configures the primary authentication mechanism that will be tried first when a user requests manager-level access
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.4INTEGER {local(1), tacacs(2), radius(3), sshPubkey(6), radiusPeapMSChapv2(7), x509Certificate(8), twoFactor(9)}read-writecurrent
hpSwitchAuthenEnableSecondary
OBJECT-TYPE
This object indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in an error. The authentication method Local uses the credential database on the switch. The Authorized authentication method will be granted access without authenticating.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.5INTEGER {local(1), none(2), authorized(3)}read-writecurrent
hpSwitchAuthenLoginServerGroupName
OBJECT-TYPE
The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.6DisplayString (SIZE(0..255))read-writecurrent
hpSwitchAuthenEnableServerGroupName
OBJECT-TYPE
The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.7DisplayString (SIZE(0..255))read-writecurrent
hpSwitchAuthenLoginTwoFactorType
OBJECT-TYPE
This object configures the type of two-factor authentication
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.8INTEGER {publickeypassword(1), certificatepassword(2)}read-writecurrent
hpSwitchAuthenEnableTwoFactorType
OBJECT-TYPE
This object configures the type of two-factor authentication
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.9INTEGER {publickeypassword(1), certificatepassword(2)}read-writecurrent
hpSwitchAuthenLoginSecondAuthMethod
OBJECT-TYPE
This object configures the password configuration for two-factor authentication
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.10INTEGER {local(1), tacacs(2), radius(3)}read-writecurrent
hpSwitchAuthenEnableSecondAuthMethod
OBJECT-TYPE
This object configures the password configuration for two-factor authentication
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.11INTEGER {local(1), tacacs(2), radius(3)}read-writecurrent
hpSwitchAuthenClientPrimary
OBJECT-TYPE
This object configures the primary authentication for SSH when the switch acts as a client.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.12INTEGER {x509Certificate(1), none(2)}read-writecurrent
hpSwitchAuthenClientSecondary
OBJECT-TYPE
This object indicates the secondary login authentication for SSH when the switch acts as a client. This is a placeholder as secondary authentication is not currently supported when primary authentication is 'certificate' for SSH client.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.13INTEGER {none(1)}read-writecurrent
hpSwitchAuthenCachedReauthAuthorized
OBJECT-TYPE
When the value of object hpSwitchAuthenLoginSecondary is set to cachedReauth(4),the ture value set for this object indicates cachedReauth authentication method will grant access in case of reauthentication fails.
1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.14TruthValueread-writecurrent
hpSwitchTacacsConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.3
hpSwitchTacacsTimeout
OBJECT-TYPE
The duration in seconds to wait for a response from the TACACS+ server host.
1.3.6.1.4.1.11.2.14.11.5.1.16.3.1Integer32 (1..255)read-writecurrent
hpSwitchTacacsAuthKey
OBJECT-TYPE
The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.3.2OCTET STRING (SIZE(0..100))read-writecurrent
hpSwitchTacacsAuthKeyEncrypted
OBJECT-TYPE
An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsAuthKey and hpSwitchTacacsAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.3.3OCTET STRING (SIZE(0..256))read-writecurrent
hpSwitchTacacsDeadTime
OBJECT-TYPE
This object specifies the TACACS+ server unavailability time. When a response is not received from a TACACS+ server, that server is then not contacted for Authentication, Authorization, or Accounting (AAA) requests for a period of dead-time defined. During this period, any AAA request received from the client is sent to the next available server. A value of zero indicates that all AAA requests are continuously sent to the unavailable server.
1.3.6.1.4.1.11.2.14.11.5.1.16.3.4Integer32 (0..1440)read-writecurrent
hpSwitchTacacsServersTable
OBJECT-TYPE
This table lists a maximum of 3 TACACS+ servers.
1.3.6.1.4.1.11.2.14.11.5.1.16.4not-accessiblecurrent
hpSwitchTacacsServersEntry
OBJECT-TYPE
A TACACS+ server table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1not-accessiblecurrent
hpSwitchTacacsServerIndex
OBJECT-TYPE
The index value which uniquely identifies a row in the TACACS+ Servers Table.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.1Integer32 (1..65535)not-accessiblecurrent
hpSwitchTacacsServerIpAddr
OBJECT-TYPE
The IP address of a TACACS+ Server.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.2IpAddressread-createcurrent
hpSwitchTacacsServerKey
OBJECT-TYPE
The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.3OCTET STRING (SIZE(0..100))read-createcurrent
hpSwitchTacacsServerStatus
OBJECT-TYPE
Status of Servers Table row.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.4RowStatusread-createcurrent
hpSwitchTacacsServerIsOobm
OBJECT-TYPE
This object indicates whether this TACACS+ Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.5TruthValueread-createcurrent
hpSwitchTacacsServerKeyEncrypted
OBJECT-TYPE
An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsServerKey and hpSwitchTacacsServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.6OCTET STRING (SIZE(0..256))read-createcurrent
hpTacacsStatsServersTable
OBJECT-TYPE
A table containing statistics for the configured TACACS+ servers.
1.3.6.1.4.1.11.2.14.11.5.1.16.5not-accessiblecurrent
hpTacacsStatsServersEntry
OBJECT-TYPE
The information associated with each row in the TACACS+ servers table.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1not-accessiblecurrent
hpTacacsStatsServerIndex
OBJECT-TYPE
The index identifying the row in the table.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.1Integer32 (1..65535)not-accessiblecurrent
hpTacacsStatsTacacsServerIpAddr
OBJECT-TYPE
The IP address of a TACACS+ Server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.2IpAddressread-onlycurrent
hpTacacsStatsNumSessOpened
OBJECT-TYPE
The number of authentication, authorization and accounting sessions opened with the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.3Counter32read-onlycurrent
hpTacacsStatsNumSessClosed
OBJECT-TYPE
The number of authentication, authorization and accounting sessions closed with the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.4Counter32read-onlycurrent
hpTacacsStatsNumSessAborted
OBJECT-TYPE
The number of authentication, authorization and accounting sessions aborted with the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.5Counter32read-onlycurrent
hpTacacsStatsNumSessErrors
OBJECT-TYPE
The number of authentication, authorization and accounting sessions with this server resulted in an error.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.6Counter32read-onlycurrent
hpTacacsStatsNumPktsIn
OBJECT-TYPE
The number of responses received from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.7Counter32read-onlycurrent
hpTacacsStatsNumPktsOut
OBJECT-TYPE
The number of requests sent to the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.8Counter32read-onlycurrent
hpTacacsStatsNumAuthPktsIn
OBJECT-TYPE
The number of authentication responses received from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.9Counter32read-onlycurrent
hpTacacsStatsNumAuthPktsOut
OBJECT-TYPE
The number of authentication requests sent to the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.10Counter32read-onlycurrent
hpTacacsStatsNumAuthPktsTimedOut
OBJECT-TYPE
The number of authentication requests that timed out due to no response from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.11Counter32read-onlycurrent
hpTacacsStatsNumAutzPktsIn
OBJECT-TYPE
The number of authorization responses received from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.12Counter32read-onlycurrent
hpTacacsStatsNumAutzPktsOut
OBJECT-TYPE
The number of authorization requests sent to the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.13Counter32read-onlycurrent
hpTacacsStatsNumAutzPktsTimedOut
OBJECT-TYPE
The number of authorization requests that timed out due to no response from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.14Counter32read-onlycurrent
hpTacacsStatsNumAcctPktsIn
OBJECT-TYPE
The number of accounting responses received from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.15Counter32read-onlycurrent
hpTacacsStatsNumAcctPktsOut
OBJECT-TYPE
The number of accounting requests sent to the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.16Counter32read-onlycurrent
hpTacacsStatsNumAcctPktsTimedOut
OBJECT-TYPE
The number of accounting requests that timed out due to no response from the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.17Counter32read-onlycurrent
hpSwitchRadiusConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.6
hpSwitchRadiusDeadTime
OBJECT-TYPE
The length of time in minutes a RADIUS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when some servers might be unavailable.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.1Integer32 (0..1440)read-writecurrent
hpSwitchRadiusTimeout
OBJECT-TYPE
The duration in seconds to wait for a response from the RADIUS server host.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.2Integer32 (1..15)read-writecurrent
hpSwitchRadiusRetransmitAttempts
OBJECT-TYPE
Maximum number of retransmission attempts.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.3Integer32 (1..5)read-writecurrent
hpSwitchRadiusAuthKey
OBJECT-TYPE
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.4OCTET STRING (SIZE(0..100))read-writecurrent
hpSwitchRadiusDynAutzPortNumber
OBJECT-TYPE
The UDP port number to listen for Disconnect and Change-of-Authorization messages.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.5Integer32 (1..65535)read-writecurrent
hpSwitchRadiusAuthKeyEncrypted
OBJECT-TYPE
An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusAuthKey and hpSwitchRadiusAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.6OCTET STRING (SIZE(0..256))read-writecurrent
hpSwitchRadiusTracking
OBJECT-TYPE
To enable or disable the RADIUS service tracking. If this feature is enabled, it is used to send access-request packets at regular intervals to track the availability of server.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.10TruthValueread-writecurrent
hpSwitchRadiusTrackingUserName
OBJECT-TYPE
This user name will be used to send Access-Request packets to the RADIUS server to track it.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.11DisplayString (SIZE(1..64))read-writecurrent
hpSwitchRadiusCppmIdentity
OBJECT-TYPE
The cppm identity value to be used during authentication with cppm server.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.12DisplayString (SIZE(0..255))read-writecurrent
hpSwitchRadiusCppmKey
OBJECT-TYPE
The cppm key value to be used during authentication with cppm server.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.13DisplayString (SIZE(0 | 8..64))read-writecurrent
hpSwitchRadiusCppmEncryptedKey
OBJECT-TYPE
The encrypted cppm key value to be used during authentication with cppm server.The key value used to set this object should be read from a compatible HPE netwokring device only.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.14DisplayString (SIZE(0..256))read-writecurrent
hpSwitchRadiusDeadTimeInfinite
OBJECT-TYPE
If this is set to true, a dead RADIUS server is skipped over by transaction requests until the RADIUS server is tracked up and alive by RADIUS tracking. The default value is set to FLASE.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.15TruthValueread-writecurrent
hpSwitchRadiusTrackingInterval
OBJECT-TYPE
The regular time interval in seconds at which RADIUS access-request packets are sent to track the availability of RADIUS server. The default time interval is 5 minutes.
1.3.6.1.4.1.11.2.14.11.5.1.16.6.16Integer32 (60..86400)read-writecurrent
hpSwitchRadiusServerTable
OBJECT-TYPE
This table lists a maximum of 3 RADIUS servers.
1.3.6.1.4.1.11.2.14.11.5.1.16.7not-accessiblecurrent
hpSwitchRadiusServerEntry
OBJECT-TYPE
A RADIUS server table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1not-accessiblecurrent
hpSwitchRadiusServerIndex
OBJECT-TYPE
The index value which uniquely identifies a row in the RADIUS Servers Table.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1Integer32 (1..65535)not-accessiblecurrent
hpSwitchRadiusServerIpAddr
OBJECT-TYPE
The IP address of a RADIUS Server. When the RADIUS server has been configured with IPv6 address, the value of this object will be set to Null.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2IpAddressread-createdeprecated
hpSwitchRadiusServerKey
OBJECT-TYPE
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3OCTET STRING (SIZE(0..100))read-createcurrent
hpSwitchRadiusServerAuthPortNumber
OBJECT-TYPE
The UDP destination port number to use for sending authentication requests to this RADIUS Server.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4Integer32 (1..65535)read-createcurrent
hpSwitchRadiusServerAcctPortNumber
OBJECT-TYPE
The UDP destination port number to use for sending accounting requests to this RADIUS server.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5Integer32 (1..65535)read-createcurrent
hpSwitchRadiusServerDynAutzEnabled
OBJECT-TYPE
This object indicates whether Dynamic Authorization messages (Disconnect-Requests and CoA-Requests) are authorized for processing from this RADIUS Server.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6TruthValueread-createcurrent
hpSwitchRadiusServerDynAutzTimeWindow
OBJECT-TYPE
A non-zero value indicates that the Event-Timestamp attribute must be used in the dynamic authorization communication exchange between the NAS and the RADIUS server. Such a value determines the time window (in seconds) within which RADIUS packets carrying the Event-Timestamp attribute will be considered as current and accepted for processing by the NAS and the RADIUS Server. Zero value disables checking for the Event-Timestamp attribute. The default time window is 300 seconds.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7Integer32 (0..65535)read-createcurrent
hpSwitchRadiusServerStatus
OBJECT-TYPE
Status of Servers Table row.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8RowStatusread-createcurrent
hpSwitchRadiusServerIsOobm
OBJECT-TYPE
This object indicates whether this RADIUS Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9TruthValueread-createcurrent
hpSwitchRadiusServerKeyEncrypted
OBJECT-TYPE
An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusServerKey and hpSwitchRadiusServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10OCTET STRING (SIZE(0..256))read-createcurrent
hpSwitchRadiusServerAddrType
OBJECT-TYPE
Type of RADIUS Server IP Address stored in hpSwitchRadiusServerAddress.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.11InetAddressTyperead-createcurrent
hpSwitchRadiusServerAddress
OBJECT-TYPE
The IPv4 or IPv6 Address of the RADIUS server.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.12InetAddressread-createcurrent
hpSwitchRadiusServerDynAutzTimeWindowType
OBJECT-TYPE
Window type indicates the acceptable window size for dynamic authorization messages. Positive window type will allow messages when time difference between sender Event-TimeStamp and receiver/switch timeStamp is between 0 to +hpSwitchRadiusServerDynAutzTimeWindow. plusorminus type will allow messages when time difference time difference between sender Event-TimeStamp and receiver/switch timeStamp is between 0 to +hpSwitchRadiusServerDynAutzTimeWindow.The default window type is positive.
1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.13INTEGER {positive(0), plusorminus(1)}read-createcurrent
hpSwitchAuthenticationMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.11
hpSwitchAuthenticationMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1
hpSwitchAuthenticationMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2
hpSwitchSslConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.12
hpSwitchSslAdminStatus
OBJECT-TYPE
This objects specifies the desired operational status of SSL.
1.3.6.1.4.1.11.2.14.11.5.1.16.12.1INTEGER {disabled(1), enabled(2)}read-writecurrent
hpSwitchSslPortNumber
OBJECT-TYPE
The port number on which the SSL server should listen for connection requests.
1.3.6.1.4.1.11.2.14.11.5.1.16.12.2Integer32 (1..65535)read-writecurrent
hpSwitchCertConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.13
hpSwitchServerCertificateOperation
OBJECT-TYPE
When this object is read, it returns the last value that was written. If a value was not set previously, then the object value will be 'none'(1). The object supports the following values and actions: 'none' - no action is taken, null operation. 'useInstalled' - This causes the switch to use a previously installed server certificate, if one is present. 'createAndUseSelfSigned' - This causes the switch to create a new self-signed certificate based on the hpSwitchServerNewCertificate parameters and use it. 'createCACertReq' - This causes the switch to create a certificate request, which is to be signed by a CA authority, based on the hpSwitchServerNewCertificate parameters. The user must subsequently download the signed certificate to complete certificate creation process. 'applyCASignedCert' - This causes the switch to process the user's response to a signed certificate from a CA to complete the certificate creation process. 'abortCASignedRequest' - This causes the switch to abort the certificate request procedure, which was initiated on createAndUseCASigned set.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.1INTEGER {none(1), useInstalled(2), createAndUseSelfSigned(3), createCACertReq(4), applyCASignedCert(5), abortCASignedRequest(6)}read-writecurrent
hpSwitchServerNewRSAKeyOperation
OBJECT-TYPE
This object when will returns a value either 'useInstalled'(1) or 'createBits1024'(4). The value 'useInstalled'(1) is returned when a certificate RSA key already exists on switch. The value 'createBits1024'(4) is returned when no certificate RSA key exists on switch. When user configuresthe values, the value triggers the following action: 'useInstalled' - The switch will use the currently configured RSA key that is already present on the switch. 'createBits512' - This value is deprecated and no longer supported. 'createBits768' - This value is deprecated and no longer supported. 'createBits1024' - This value specifies the creation of a new RSA key of length 1024-bit. 'createBits2048' - This value specifies the creation of a new RSA key of length 2048-bit.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.2INTEGER {useInstalled(1), createBits512(2), createBits768(3), createBits1024(4), createBits2048(5)}read-writecurrent
hpSwitchServerNewCertificateStartDate
OBJECT-TYPE
Specifies the start date of validity for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.3DateAndTimeread-writecurrent
hpSwitchServerNewCertificateEndDate
OBJECT-TYPE
Specifies the end date of validity for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.4DateAndTimeread-writecurrent
hpSwitchServerNewCertificateCommonName
OBJECT-TYPE
Specifies the common name for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.5OCTET STRING (SIZE(1..40))read-writedeprecated
hpSwitchServerNewCertificateOrgUnit
OBJECT-TYPE
Specifies the organization for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.6OCTET STRING (SIZE(1..40))read-writedeprecated
hpSwitchServerNewCertificateOrgName
OBJECT-TYPE
Specifies the organization name for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.7OCTET STRING (SIZE(1..40))read-writedeprecated
hpSwitchServerNewCertificateCityName
OBJECT-TYPE
Specifies the city for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.8OCTET STRING (SIZE(1..40))read-writedeprecated
hpSwitchServerNewCertificateStateName
OBJECT-TYPE
Specifies the state for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.9OCTET STRING (SIZE(1..40))read-writedeprecated
hpSwitchServerNewCertificateCountryCode
OBJECT-TYPE
Specifies the 2-letter ISO country code of the server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.10OCTET STRING (SIZE(2))read-writecurrent
hpSwitchServerNewCertCommonName
OBJECT-TYPE
Specifies the common name for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.11OCTET STRING (SIZE(1..200))read-writecurrent
hpSwitchServerNewCertOrgUnit
OBJECT-TYPE
Specifies the organization for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.12OCTET STRING (SIZE(1..200))read-writecurrent
hpSwitchServerNewCertOrgName
OBJECT-TYPE
Specifies the organization name for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.13OCTET STRING (SIZE(1..200))read-writecurrent
hpSwitchServerNewCertCityName
OBJECT-TYPE
Specifies the city for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.14OCTET STRING (SIZE(1..200))read-writecurrent
hpSwitchServerNewCertStateName
OBJECT-TYPE
Specifies the state for a new server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.15OCTET STRING (SIZE(1..200))read-writecurrent
hpSwitchServerNewCertKeySizeExists
OBJECT-TYPE
Specifies whether the given key size already exist.
1.3.6.1.4.1.11.2.14.11.5.1.16.13.16TruthValueread-writecurrent
hpSwitchCertStatus
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.14
hpSwitchServerCertificateType
OBJECT-TYPE
Specifies the type of server certificate the switch is currently using as follows: 'none' - no server certificate is present. 'pendCaSigned' - switch is waiting for user to offer CA-signed certificate request. 'selfSigned' - a self-signed server certificate is being used. 'caSigned' - a CA-signed server certificate is being used.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.1INTEGER {none(1), pendCaSigned(2), selfSigned(3), caSigned(4)}read-onlycurrent
hpSwitchServerCertificateRSAKeySize
OBJECT-TYPE
Specifies the RSA key length of the public key contained in the certificate as follows: 'none' - no certificate is present 'Bits512' - certificate has a 512-bit public key 'Bits768' - certificate has a 768-bit public key 'Bits1024' - certificate has a 1024-bit public key 'Bits2048' - certificate has a 2048-bit public key
1.3.6.1.4.1.11.2.14.11.5.1.16.14.2INTEGER {none(0), bits512(1), bits768(2), bits1024(3), bits2048(4)}read-onlycurrent
hpSwitchServerCertificateSerialNumber
OBJECT-TYPE
Specifies the serial number of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.3OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateStartDate
OBJECT-TYPE
Specifies the start date of validity of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.4DateAndTimeread-onlycurrent
hpSwitchServerCertificateEndDate
OBJECT-TYPE
Specifies the end date of validity of installed server server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.5DateAndTimeread-onlycurrent
hpSwitchServerCertificateCommonName
OBJECT-TYPE
Specifies the common name of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.6OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateOrgUnit
OBJECT-TYPE
Specifies the organization of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.7OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateOrgName
OBJECT-TYPE
Specifies the organization name of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.8OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateCityName
OBJECT-TYPE
Specifies the city of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.9OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateStateName
OBJECT-TYPE
Specifies the state of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.10OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateCountryCode
OBJECT-TYPE
Specifies the 2-letter ISO country code of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.11OCTET STRING (SIZE(0..40))read-onlycurrent
hpSwitchServerCertificateFingerprintMD5
OBJECT-TYPE
Specifies the MD5 fingerprint of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.12OCTET STRING (SIZE(0..48))read-onlycurrent
hpSwitchServerCertificateFingerprintSHA1
OBJECT-TYPE
Specifies the SHA1 fingerprint of installed server certificate.
1.3.6.1.4.1.11.2.14.11.5.1.16.14.13OCTET STRING (SIZE(0..51))read-onlycurrent
hpSwitchKmsChainConfigTable
OBJECT-TYPE
This table contains configuration objects for Key Management Subsystem chains.
1.3.6.1.4.1.11.2.14.11.5.1.16.15not-accessiblecurrent
hpSwitchKmsChainConfigEntry
OBJECT-TYPE
KMS chain configuration table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1not-accessiblecurrent
hpSwitchKmsChainId
OBJECT-TYPE
This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName as the index.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.1Integer32 (0..32767)not-accessiblecurrent
hpSwitchKmsChainName
OBJECT-TYPE
This object configures the KMS chain name.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.2DisplayString (SIZE(1..32))read-createcurrent
hpSwitchKmsChainKeys
OBJECT-TYPE
Returns the number of keys in the KMS chain.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.4Gauge32read-onlycurrent
hpSwitchKmsChainActiveKeys
OBJECT-TYPE
Returns the number of active keys in the KMS chain.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.5Gauge32read-onlycurrent
hpSwitchKmsChainExpKeys
OBJECT-TYPE
Returns the number of expired keys in the KMS chain.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.6Gauge32read-onlycurrent
hpSwitchKmsChainStatus
OBJECT-TYPE
The status of the row in the KMS chain configuration table.
1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.7RowStatusread-createcurrent
hpSwitchKmsKeyConfigTable
OBJECT-TYPE
This table contains the configuration objects for the Key Management Subsystem.
1.3.6.1.4.1.11.2.14.11.5.1.16.16not-accessiblecurrent
hpSwitchKmsKeyConfigEntry
OBJECT-TYPE
KMS configuration table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1not-accessiblecurrent
hpSwitchKmsKeyChainId
OBJECT-TYPE
This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName as the index.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.1Integer32 (0..32767)not-accessiblecurrent
hpSwitchKmsKeyId
OBJECT-TYPE
This object is the KMS key index.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.2Integer32 (0..255)not-accessiblecurrent
hpSwitchKmsKeyStr
OBJECT-TYPE
This object configures the KMS key chain name.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.3OCTET STRING (SIZE(0..16))read-createcurrent
hpSwitchKmsKeyStartTime
OBJECT-TYPE
Start time of the KMS key.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.4Unsigned32read-createcurrent
hpSwitchKmsKeyStopTime
OBJECT-TYPE
Stop time of the KMS key.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.5Unsigned32read-createcurrent
hpSwitchKmsKeyTxStartTime
OBJECT-TYPE
Start time of the transmission for the KMS key.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.6Unsigned32read-createcurrent
hpSwitchKmsKeyTxStopTime
OBJECT-TYPE
Stop time of the transmission for the KMS key.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.7Unsigned32read-createcurrent
hpSwitchKmsKeyStatus
OBJECT-TYPE
Row Status of the KMS chain configuration table.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.8RowStatusread-createcurrent
hpSwitchKmsKeyEncrypted
OBJECT-TYPE
An encrypted form of the KMS key. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchKmsKeyStr and hpSwitchKmsKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.9OCTET STRING (SIZE(0..256))read-createcurrent
hpSwitchOspfIfAuthTable
OBJECT-TYPE
This table supplements the OSPF interface configuration table.
1.3.6.1.4.1.11.2.14.11.5.1.16.17not-accessiblecurrent
hpSwitchOspfIfAuthEntry
OBJECT-TYPE
OSPF interface authentication configuration table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.17.1not-accessiblecurrent
hpSwitchOspfIfAuthChain
OBJECT-TYPE
This object configures the KMS chain name for OSPF interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.1DisplayString (SIZE(0..32))read-createcurrent
hpSwitchOspfIfAuthKeyEncrypted
OBJECT-TYPE
The object represents the encrypted format of authentication key stored in the object ospfIfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.2OCTET STRING (SIZE(0..256))read-createcurrent
hpSwitchOspfVirtIfAuthTable
OBJECT-TYPE
This table supplements the OSPF virtual interface configuration table.
1.3.6.1.4.1.11.2.14.11.5.1.16.18not-accessiblecurrent
hpSwitchOspfVirtIfAuthEntry
OBJECT-TYPE
OSPF virtual interface authentication configuration table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.18.1not-accessiblecurrent
hpSwitchOspfVirtIfAuthChain
OBJECT-TYPE
This object configures the KMS chain name for OSPF virtual interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.1DisplayString (SIZE(0..32))read-createcurrent
hpSwitchOspfVirtIfAuthKeyEncrypted
OBJECT-TYPE
This object represents the encrypted format of authentication key stored in the object ospfVirtIfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.2OCTET STRING (SIZE(0..256))read-createcurrent
hpicfSwitchUserConfigTable
OBJECT-TYPE
This table supplements the manager/operator name/password. The manager/operator password are limited to the CLI interface through Console and Menu interface, and web.
1.3.6.1.4.1.11.2.14.11.5.1.16.19not-accessiblecurrent
hpicfSwitchUserConfigEntry
OBJECT-TYPE
Manager/operator name/password table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1not-accessiblecurrent
hpicfSwitchUserConfigIndex
OBJECT-TYPE
The index value uniquely identifies a row in the User Config table, currently limited to a value of 1.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.1Integer32 (1..65535)not-accessiblecurrent
hpicfSwitchUserName
OBJECT-TYPE
The User Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.2OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchOperatorName
OBJECT-TYPE
The Operator Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.3OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchUserPassword
OBJECT-TYPE
The User Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.4OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchOperatorPassword
OBJECT-TYPE
The Operator Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.5OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchUserConfigStatus
OBJECT-TYPE
Status of User Config Table row.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.6RowStatusread-createcurrent
hpicfSwitchPortAccessName
OBJECT-TYPE
The Port-Access Name, ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.7OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchPortAccessPassword
OBJECT-TYPE
The Port-Access Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.8OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchUserPasswordHashType
OBJECT-TYPE
The hash-type of the User Password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.9INTEGER {unknown(0), plainText(1), sha1(3), sha256(4)}read-createcurrent
hpicfSwitchOperatorPasswordHashType
OBJECT-TYPE
The hash-type of the Operator Password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.10INTEGER {unknown(0), plainText(1), sha1(3), sha256(4)}read-createcurrent
hpicfSwitchPortAccessPasswordHashType
OBJECT-TYPE
The hash-type of the Port-Access Password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.11INTEGER {unknown(0), plainText(1)}read-createcurrent
hpicfSwitchUserPasswordEncrypted
OBJECT-TYPE
An encrypted form of the user password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchUserPassword and hpicfSwitchUserPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.12OCTET STRING (SIZE(0..256))read-createcurrent
hpicfSwitchOperatorPasswordEncrypted
OBJECT-TYPE
An encrypted form of the operator password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchOperatorPassword and hpicfSwitchOperatorPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.13OCTET STRING (SIZE(0..256))read-createcurrent
hpicfSwitchPortAccessPasswordEncrypted
OBJECT-TYPE
An encrypted form of the port-access password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchPortAccessPassword and hpicfSwitchPortAccessPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.14OCTET STRING (SIZE(0..256))read-createcurrent
hpicfSwitchBypassUsername
OBJECT-TYPE
This object controls bypassing of the username while accessing the switch to get Operator or Manager access. When enabled, the Manager level and Operator level usernames are bypassed and authentication based on password takes place. If custom usernames are configured, this configuration is ignored and authentication based on both username and password takes place. The default value is 'disable' and user is authenticated based on both username and password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.15INTEGER {enable(1), disable(2)}read-createcurrent
hpicfSwitchUserPwdAgingInterval
OBJECT-TYPE
This object holds the manager password aging value.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.16Integer32 (0..365)read-createcurrent
hpicfSwitchOperatorPwdAgingInterval
OBJECT-TYPE
This object holds the operator password aging value.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.17Integer32 (0..365)read-createcurrent
hpicfSwitchUserPwdLengthValue
OBJECT-TYPE
This object holds length of the manager password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.18Integer32 (15..64)read-createcurrent
hpicfSwitchOperatorPwdLengthValue
OBJECT-TYPE
This object holds length of the operator password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.19Integer32 (8..64)read-createcurrent
hpicfSwitchNonPlaintextSha256
OBJECT-TYPE
This object enables storing the password in SHA-256 form.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.20INTEGER {enable(1), disable(2)}read-createcurrent
hpicfSwitchUserPasswordHashSha256
OBJECT-TYPE
The SHA256 hash-type of the Manager Password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.21OCTET STRING (SIZE(0..1024))read-createcurrent
hpicfSwitchOperatorPasswordHashSha256
OBJECT-TYPE
The SHA256 hash-type of the Operator Password.
1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.22OCTET STRING (SIZE(0..1024))read-createcurrent
hpSwitchAAAServerGroupTable
OBJECT-TYPE
This table lists the RADIUS server groups.
1.3.6.1.4.1.11.2.14.11.5.1.16.20not-accessiblecurrent
hpSwitchAAAServerGroupEntry
OBJECT-TYPE
RADIUS server group entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1not-accessiblecurrent
hpSwitchAAAServerGroupProtocolType
OBJECT-TYPE
This part of the index indicates which protocol server the server group is for. See the documentation protocols supported.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.1INTEGER {radius(1), tacacs(2)}not-accessiblecurrent
hpSwitchAAAServerGroupIndex
OBJECT-TYPE
This index indicates the server group in the AAA server group table.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.2Integer32not-accessiblecurrent
hpSwitchAAAServerGroupServerIndex
OBJECT-TYPE
The index value which identifies the server in the server group.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.3Integer32not-accessiblecurrent
hpSwitchAAAServerGroupName
OBJECT-TYPE
The name of a given AAA server group. The current maximum length is 12.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.4DisplayString (SIZE(0..255))read-createcurrent
hpSwitchAAAServerGroupServerInetType
OBJECT-TYPE
The IP Address type of the server. Currently only Ipv4 is supported.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.5InetAddressTyperead-createcurrent
hpSwitchAAAServerGroupServerInetAddr
OBJECT-TYPE
The IP Address of the server.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.6InetAddressread-createcurrent
hpSwitchAAAServerGroupStatus
OBJECT-TYPE
The status of the AAA server group row. Supported values are createAndGo, destroy, and active.
1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.7RowStatusread-createcurrent
hpSwitchLocalMgmtPrivUsernamesTable
OBJECT-TYPE
This table lists the Local Management Privilege user names.
1.3.6.1.4.1.11.2.14.11.5.1.16.21not-accessiblecurrent
hpSwitchLocalMgmtPrivUsernamesEntry
OBJECT-TYPE
Local Management Usernames entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1not-accessiblecurrent
hpSwitchLocalMgmtPrivUsernameIndex
OBJECT-TYPE
The index value uniquely identifies a row in the command table.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.1Integer32not-accessiblecurrent
hpSwitchLocalMgmtPrivUsernameStr
OBJECT-TYPE
The username .
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.2OCTET STRING (SIZE(1..255))read-createcurrent
hpSwitchLocalMgmtPrivUsernamePasswdType
OBJECT-TYPE
The type of encryption used for this Conceptual row password object.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.3INTEGER {unknown(0), sha1(3), sha256(4)}read-createcurrent
hpSwitchLocalMgmtPrivUsernamePasswd
OBJECT-TYPE
Storage location for the password associated with this Username. Always returns a NULL string.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.4OCTET STRING (SIZE(0..255))read-createcurrent
hpSwitchLocalMgmtPrivUsernameGrpIndex
OBJECT-TYPE
The index that represents which group this user is a member of.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.5Integer32read-createcurrent
hpSwitchLocalMgmtPrivUsernameStatus
OBJECT-TYPE
The status of the Local Management Privilege username row.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.6RowStatusread-createcurrent
hpSwitchLocalMgmtPwdUserAgingInterval
OBJECT-TYPE
This object holds the user password aging value.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.7Integer32 (0..365)read-createcurrent
hpSwitchLocalMgmtPwdUserPasswdLengthValue
OBJECT-TYPE
This object holds length of local user password.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.8Integer32 (1..64)read-createcurrent
hpSwitchLocalMgmtPrivUsernamePasswdSha256
OBJECT-TYPE
Storage location for the sha256 password associated with this Username. Always returns a NULL string.
1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.9OCTET STRING (SIZE(0..255))read-createcurrent
hpSwitchRipIfAuthTable
OBJECT-TYPE
This table supplements the RIP interface configuration table.
1.3.6.1.4.1.11.2.14.11.5.1.16.23not-accessiblecurrent
hpSwitchRipIfAuthEntry
OBJECT-TYPE
RIP interface authentication configuration table entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.23.1not-accessiblecurrent
hpSwitchRipIfAuthChain
OBJECT-TYPE
This object configures the KMS chain name for RIP interfaces.
1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.1DisplayString (SIZE(0..32))read-createcurrent
hpSwitchRip2IfConfAuthKeyEncrypted
OBJECT-TYPE
This object represents the encrypted format of the authentication key stored in the object rip2IfConfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.2OCTET STRING (SIZE(0..256))read-createcurrent
hpSwitchAuthenPwdCompositionTable
OBJECT-TYPE
This table lists different type of charaters required to create a password as per UCR guidelines.
1.3.6.1.4.1.11.2.14.11.5.1.16.24not-accessiblecurrent
hpSwitchAuthenPwdCompositionEntry
OBJECT-TYPE
An Authentication Method Table Entry.
1.3.6.1.4.1.11.2.14.11.5.1.16.24.1not-accessiblecurrent
hpSwitchAuthenCompositionIndex
OBJECT-TYPE
This object indicates the different types of charaters required to create a password.
1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.1INTEGER {lowerCase(1), upperCase(2), specialCharacter(3), number(4)}not-accessiblecurrent
hpSwitchAuthenCompositionValue
OBJECT-TYPE
This object indicates number of characters allow for password compostion
1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.2Integer32 (2..15)read-writecurrent
hpSwitchAuthenticationPasswordConfig
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.25
hpSwitchAuthPwdControlCheck
OBJECT-TYPE
This object enables the password configuration feature.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.1INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdUserNameCheck
OBJECT-TYPE
This object enables the check to ensure that the password does not contain repeat or reverse characters of the associated username.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.2INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdRepeatCharactersCheck
OBJECT-TYPE
This object enables the check that the password does not contain at least three of the same characters used consecutively.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.3INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdRepeatPasswordCheck
OBJECT-TYPE
This object enables the check that the new password differs from the previous password by at least four characters.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.4INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdAgingCheck
OBJECT-TYPE
This object enables the check for the password expiry check.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.5INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdLogonDetailsCheck
OBJECT-TYPE
This object enables the previous login details.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.6INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdAgingValue
OBJECT-TYPE
This object provides the global aging value.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.7Integer32 (1..365)read-writecurrent
hpSwitchAuthPwdHistoryCheck
OBJECT-TYPE
This object enables the password history check.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.8INTEGER {enable(1), disable(2)}read-writecurrent
hpSwitchAuthPwdHistoryRecordsRange
OBJECT-TYPE
This object indicates the number of password history records.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.9Integer32 (2..15)read-writecurrent
hpSwitchAuthPwdAlertBeforeExpiry
OBJECT-TYPE
This object indicates the period, in days, by which the user needs to be alerted before the password expiry.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.10Integer32 (1..30)read-writecurrent
hpSwitchAuthPwdExpiredUserLoginDays
OBJECT-TYPE
This object indicates the period, in days, for which the user will be allowed to login after password expiry.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.11Integer32 (1..90)read-writecurrent
hpSwitchAuthPwdExpiredUserLoginAttempts
OBJECT-TYPE
This object indicates the number of times the user will be allowed to login to the switch after the expiry of the password.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.12Integer32 (1..10)read-writecurrent
hpSwitchAuthPwdUpdateInterval
OBJECT-TYPE
This object indicates the minimum time, in hours, before which the user is not allowed to change the password.
1.3.6.1.4.1.11.2.14.11.5.1.16.25.13Integer32 (0..168)read-writecurrent
hpSwitchFrontPanelSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.5.1.16.26
hpSwitchFpsPasswordClear
OBJECT-TYPE
This object enables or disables the front panel security password clear command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.1INTEGER {enable(0), enablewithreset(1), disable(2)}read-writecurrent
hpSwitchFpsFactoryReset
OBJECT-TYPE
This object enables or disables the front panel security factory reset command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.2INTEGER {enable(0), disable(1)}read-writecurrent
hpSwitchFpsPasswordRecovery
OBJECT-TYPE
This object enables or disables the front panel security password recovery command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.3INTEGER {off(0), normal(1), strong(2)}read-writecurrent
hpSwitchFpsDiagnosticResetClearButton
OBJECT-TYPE
This object enables or disables the front panel security diagnostic reset clear button command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.4INTEGER {enable(0), disable(1)}read-writecurrent
hpSwitchFpsDiagnosticResetSerialConsole
OBJECT-TYPE
This object enables or disables the front panel security diagnostic reset serial console command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.5INTEGER {enable(0), disable(1)}read-writecurrent
hpSwitchFpsDisplayInConfig
OBJECT-TYPE
This object enables or disables the front panel security display in config command.
1.3.6.1.4.1.11.2.14.11.5.1.16.26.6INTEGER {enable(0), disable(1)}read-writecurrent

Notifications

NameOIDStatus
hpSwitchPasswordExpiryNotify
NOTIFICATION-TYPE
An hpSwitchPasswordExpiryNotify notification that signifies that the password configured for the specified user has expired.
1.3.6.1.4.1.11.2.14.11.5.1.16.0.1current

Conformance

NameOIDStatus
hpSwitchAuthenticationMIBCompliance
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.1deprecated
hpSwitchAuthenticationMIBCompliance1
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.2deprecated
hpSwitchAuthenticationMIBCompliance2
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.3deprecated
hpSwitchAuthenticationMIBComplianceOobm
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib with OOBM support
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.4deprecated
hpSwitchUserConfigMIBCompliance
MODULE-COMPLIANCE
The compliance statement for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.5deprecated
hpSwitchAAAServerMIBCompliance
MODULE-COMPLIANCE
The compliance statement for configuring RADIUS server groups.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.6current
hpSwitchAuthenMIBCompliance
MODULE-COMPLIANCE
The compliance statement for listing the authentication methods to be tried for granting different access levels through various access tasks
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.7current
hpSwitchLocalMgmtPrivUserMIBCompliance
MODULE-COMPLIANCE
The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.8deprecated
hpSwitchAuthenticationMIBCompliance3
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.9deprecated
hpSwitchUserConfigMIBCompliance1
MODULE-COMPLIANCE
The compliance statement for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.10deprecated
hpSwitchLocalMgmtPrivUserMIBCompliance1
MODULE-COMPLIANCE
The compliance statement for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.11current
hpSwitchAuthenticationMIBCompliance4
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication MIB.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.12deprecated
hpSwitchAuthenticationMIBCompliance5
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.13deprecated
hpSwitchAuthenticationMIBComplianceOobm1
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib with OOBM support
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.14current
hpSwitchAuthenticationMIBCompliance6
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.15deprecated
hpSwitchAuthenticationMIBCompliance7
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.16deprecated
hpSwitchAuthenticationMIBCompliance8
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.17current
hpSwitchAuthenticationMIBCompliance9
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.18deprecated
hpSwitchAuthenticationMIBCompliance10
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP password Authentication MIB.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.19current
hpSwitchLocalMgmtPrivUserMIBCompliance2
MODULE-COMPLIANCE
The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.20deprecated
hpSwitchUserConfigMIBCompliance2
MODULE-COMPLIANCE
The compliance statement for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.21deprecated
hpSwitchAuthenticationMIBCompliance11
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.22deprecated
hpSwitchAuthenticationMIBCompliance12
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.23deprecated
hpSwitchUserConfigMIBCompliance3
MODULE-COMPLIANCE
The compliance statement for configuring username and password for operator, manager or port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.24current
hpSwitchLocalMgmtPrivUserMIBCompliance3
MODULE-COMPLIANCE
The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.25current
hpSwitchAuthenticationMIBCompliance13
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.26deprecated
hpSwitchAuthenticationMIBCompliance14
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.27deprecated
hpSwitchAuthenticationMIBCompliance15
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.28deprecated
hpSwitchAuthenticationMIBCompliance16
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.29deprecated
hpSwitchFrontPanelSecurityCompliance
MODULE-COMPLIANCE
The compliance statement for configuring front panel security commands.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.30current
hpSwitchAuthenticationMIBCompliance17
MODULE-COMPLIANCE
The compliance statement for devices implementing the HP Authentication Mib.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.31current
hpSwitchAuthenticationConfigGroup
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.1deprecated
hpSwitchTacacsConfigGroup
OBJECT-GROUP
A collection of objects for configuring the state of the TACACS+ protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.2deprecated
hpSwitchTacacsStatsGroup
OBJECT-GROUP
A collection of objects for viewing the status information of the TACACS+ protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.3current
hpSwitchRadiusConfigGroup
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.4deprecated
hpSwitchKmsGroup
OBJECT-GROUP
A collection of objects for configuring KMS functionality.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.6deprecated
hpSwitchOspfAuthGroup
OBJECT-GROUP
A collection of objects for configuring OSPF authentication.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.7deprecated
hpSwitchAuthenticationConfigGroup1
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.8deprecated
hpSwitchSslGroup
OBJECT-GROUP
A collection of objects for configuring SSL Servers.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.9current
hpSwitchCertGroup
OBJECT-GROUP
A collection of objects for configuring Certificates.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.10current
hpSwitchCertStatusGroup
OBJECT-GROUP
A collection of objects for configuring Certificate Status.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.11current
hpSwitchTacacsOobmGroup
OBJECT-GROUP
A collection of objects for configuring the TACACS+ server entry with support for OOBM (Out of Band Management) interface.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.12current
hpSwitchRadiusOobmGroup
OBJECT-GROUP
A collection of objects for configuring the RADIUS server entry with support for OOBM (Out of Band Management) interface.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.13deprecated
hpSwitchCertStatusGroup2
OBJECT-GROUP
A collection of objects for configuring Certificate Status.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.14deprecated
hpSwitchUserConfigGroup
OBJECT-GROUP
A collection of objects for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.15deprecated
hpSwitchAAAServerGroup
OBJECT-GROUP
A collection of objects for configuring RADIUS server groups.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.16current
hpSwitchAuthenGroup
OBJECT-GROUP
A collection of objects for listing the authentication methods to be tried for granting different access levels through various access tasks.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.17current
hpSwitchAuthLocalMgmtPrivUserGroup
OBJECT-GROUP
A collection of objects for configuring Local Management Privilege Groups
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.18deprecated
hpSwitchTacacsConfigGroup1
OBJECT-GROUP
A collection of objects for configuring the state of the TACACS+ protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.19current
hpSwitchRadiusConfigGroup1
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.20deprecated
hpSwitchKmsGroup1
OBJECT-GROUP
A collection of objects for configuring KMS functionality.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.21current
hpSwitchUserConfigGroup1
OBJECT-GROUP
A collection of objects for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.22deprecated
hpSwitchAuthLocalMgmtPrivUserGroup1
OBJECT-GROUP
Row Status of objects for configuring Local Management Privilege Groups
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.23current
hpSwitchCertStatusGroup3
OBJECT-GROUP
A collection of objects for configuring Certificate Keys.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.24current
hpSwitchAuthenticationConfigGroup2
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.25deprecated
hpSwitchRadiusConfigGroup2
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.26deprecated
hpSwitchAuthenticationConfigGroup3
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.27deprecated
hpSwitchAuthenticationConfigGroup4
OBJECT-GROUP
A collection of objects which controls bypassing of the username during authentication to get Operator or Manager access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.28current
hpSwitchRadiusConfigGroup3
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.29deprecated
hpSwitchRipAuthGroup
OBJECT-GROUP
A collection of objects for configuring RIP authentication.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.31deprecated
hpSwitchAuthenticationPasswordConfigGroup
OBJECT-GROUP
A collection of objects for configuring the password authentication features as per UCR guidelines.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.32current
hpSwitchUserConfigGroup2
OBJECT-GROUP
A collection of objects for configuring user-name/password for operator/manager/port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.33deprecated
hpSwitchAuthLocalMgmtPrivUserGroup2
OBJECT-GROUP
A collection of objects for configuring Local Management Privilege Groups
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.34deprecated
hpSwitchAuthNotificationGroup
NOTIFICATION-GROUP
A collection of objects that lists the authentication notifications.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.35current
hpSwitchRadiusConfigGroup4
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.36deprecated
hpSwitchAuthenticationConfigGroup5
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.37deprecated
hpSwitchUserConfigGroup3
OBJECT-GROUP
A collection of objects for configuring username and password for operator, manager or port-access.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.38current
hpSwitchAuthLocalMgmtPrivUserGroup3
OBJECT-GROUP
A collection of objects for configuring Local Management Privilege Groups
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.39current
hpSwitchOspfAuthGroup1
OBJECT-GROUP
A collection of objects for configuring OSPF authentication.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.40current
hpSwitchRipAuthGroup1
OBJECT-GROUP
A collection of objects for configuring RIP authentication.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.41current
hpSwitchAuthenticationConfigGroup6
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.42deprecated
hpSwitchAuthenticationConfigGroup7
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.43deprecated
hpSwitchRadiusConfigGroup5
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.44deprecated
hpSwitchFrontPanelSecurityGroup
OBJECT-GROUP
A collection of objects for configuring front panel security commands.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.45current
hpSwitchRadiusConfigGroup6
OBJECT-GROUP
A collection of objects for configuring the state of the RADIUS protocol.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.46current
hpSwitchAuthenticationConfigGroup8
OBJECT-GROUP
A collection of objects for configuring the authentication features.
1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.47current