HIPATH-WIRELESS-HWC-MIB
- Registered at
- 1.3.6.1.4.1.4329.15.3.21.3.6.1.4.1.4329.15.3.31.3.6.1.4.1.4329.15.3.41.3.6.1.4.1.4329.15.3.51.3.6.1.4.1.4329.15.3.61.3.6.1.4.1.4329.15.3.71.3.6.1.4.1.4329.15.3.81.3.6.1.4.1.4329.15.3.91.3.6.1.4.1.4329.15.3.101.3.6.1.4.1.4329.15.3.111.3.6.1.4.1.4329.15.3.191.3.6.1.4.1.4329.15.3.201.3.6.1.4.1.4329.15.3.301.3.6.1.4.1.4329.15.5.2
- Last updated
- 2016-04-13 13:55
- Organization
- Chantry Networks Inc.
- Revisions
- 2016-04-13 13:55, 2016-03-09 16:41, 2015-10-06 17:31, 2015-06-12 12:05, 2015-03-17 10:31, 2014-11-28 17:31, 2014-06-17 15:29, 2014-04-16 14:29, 2014-01-27 14:29, 2013-11-18 10:29, 2013-08-28 11:17, 2013-08-01 15:55, 2013-07-12 16:50, 2013-04-18 15:55, 2012-10-18 11:50, 2012-09-27 11:10, 2012-09-10 14:10, 2012-02-13 19:33, 2011-08-17 14:18, 2011-06-13 13:10, 2011-04-29 16:06, 2011-01-13 13:25, 2010-04-29 17:44, 2010-04-08 16:45, 2010-02-23 15:17, 2009-08-18 12:00, 2009-07-23 12:47, 2009-04-23 17:14, 2009-01-19 13:49, 2008-08-13 14:31, 2007-11-26 16:15, 2007-08-11 16:15, 2007-01-15 13:38, 2005-10-28 13:12
- Namespace
- ewc
- Source file
HIPATH-WIRELESS-HWC-MIB- Digest
sha256:77c2ca19f778630528c583725639708ffe50b3b5f6436d3075f3abe38d6c0fb4
Description
The access controller MIB
Contact
Chantry Networks, Inc. 55 Commerce Valley Drive (W), Suite 400 Thornhill, Ontario L3T 7V9, Canada Phone: 1-289-695-3182 Fax: 1 289-695-3299
Imports
| From | Symbols |
|---|---|
| HIPATH-WIRELESS-SMI | hiPathWirelessMgmt, hiPathWirelessModules |
| IEEE802dot11-MIB | WEPKeytype |
| IF-MIB | InterfaceIndex, ifIndex |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HIPATH-WIRELESS-HWC-MIB HIPATH-WIRELESS-SMI IANAifType-MIB IEEE802dot11-MIB IF-MIB IPV6-TC SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HundredthOfGauge32 TEXTUAL-CONVENTION This textual convention represents a hundredth of a gauge number. | current | |||
| HundredthOfGauge64 TEXTUAL-CONVENTION This textual convention represents a hundredth of a 64-bit gauge number. | current | |||
| HundredthOfInt32 TEXTUAL-CONVENTION This textual convention represents a hundredth of an integer number. | current | |||
| LogEventSeverity TEXTUAL-CONVENTION The log event severities used in the access controller. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hiPathWirelessController OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2 | |||
| systemObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.1 | |||
| sysSoftwareVersion OBJECT-TYPE System software version. | 1.3.6.1.4.1.4329.15.3.2.1.1 | DisplayString | read-only | current |
| sysLogLevel OBJECT-TYPE Sets the level of events which are written to the system log. | 1.3.6.1.4.1.4329.15.3.2.1.2 | LogEventSeverity | read-write | current |
| sysSerialNo OBJECT-TYPE System serial number. | 1.3.6.1.4.1.4329.15.3.2.1.3 | OCTET STRING (SIZE(0..64)) | read-only | current |
| sysLogSupport OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.1.4 | |||
| hiPathWirelessAppLogFacility OBJECT-TYPE The application log facility level for syslog. | 1.3.6.1.4.1.4329.15.3.2.1.4.1 | INTEGER {local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6)} | read-write | current |
| serviceLogFacility OBJECT-TYPE The service log facility level for syslog. | 1.3.6.1.4.1.4329.15.3.2.1.4.2 | INTEGER {local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6)} | read-write | current |
| includeAllServiceMessages OBJECT-TYPE Indicates if DHCP messages should also be forwarded to syslog. | 1.3.6.1.4.1.4329.15.3.2.1.4.3 | TruthValue | read-write | current |
| sysLogServersTable OBJECT-TYPE Table of syslog servers to forward logging messages. | 1.3.6.1.4.1.4329.15.3.2.1.4.4 | not-accessible | current | |
| sysLogServersEntry OBJECT-TYPE Configuration information for an external syslog server. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1 | not-accessible | current | |
| sysLogServerIndex OBJECT-TYPE Table index for the syslog server. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1 | Integer32 (1..2147483647) | read-write | current |
| sysLogServerEnabled OBJECT-TYPE Indicates if messages are to be sent to the syslog server. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2 | TruthValue | read-write | current |
| sysLogServerIP OBJECT-TYPE syslog server IP address. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3 | IpAddress | read-write | current |
| sysLogServerPort OBJECT-TYPE syslog server port number. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4 | Integer32 | read-write | current |
| sysLogServerRowStatus OBJECT-TYPE RowStatus for operating on syslogServersTable. | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5 | RowStatus | read-write | current |
| sysCPUType OBJECT-TYPE Wireless controller's CPU type | 1.3.6.1.4.1.4329.15.3.2.1.5 | DisplayString | read-only | current |
| apLogManagement OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.1.6 | |||
| apLogCollectionEnable OBJECT-TYPE If this field is set to true, then the AP log collection feature is enabled. | 1.3.6.1.4.1.4329.15.3.2.1.6.1 | TruthValue | read-write | current |
| apLogFrequency OBJECT-TYPE Number of log collections performed daily. The number must be one of the following 1, 2, 4, 6. | 1.3.6.1.4.1.4329.15.3.2.1.6.2 | Integer32 | read-write | current |
| apLogDestination OBJECT-TYPE Destination where the log file will be stored. If the local flash is not mounted, then you can not select 1. 0 : local memory. 1 : flash. 2 : remote location. | 1.3.6.1.4.1.4329.15.3.2.1.6.3 | INTEGER {local(0), flash(1), remote(2)} | read-write | current |
| apLogFTProtocol OBJECT-TYPE File transfer protocol. This field has meaning only when apLogDestination is set to remote(2). 0 : ftp. 1 : scp. | 1.3.6.1.4.1.4329.15.3.2.1.6.4 | INTEGER {ftp(0), scp(1)} | read-write | current |
| apLogServerIP OBJECT-TYPE The IP address of the remote server. This field has meaning only when apLogDestination is set to remote(2). | 1.3.6.1.4.1.4329.15.3.2.1.6.5 | IpAddress | read-write | current |
| apLogUserId OBJECT-TYPE The user ID that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). | 1.3.6.1.4.1.4329.15.3.2.1.6.6 | DisplayString | read-write | current |
| apLogPassword OBJECT-TYPE The user password that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). This field can only be viewed in SNMPv3 mode with privacy. | 1.3.6.1.4.1.4329.15.3.2.1.6.7 | DisplayString | read-write | current |
| apLogDirectory OBJECT-TYPE The directory of the remote server. This field has meaning only when apLogDestination is set to remote(2). | 1.3.6.1.4.1.4329.15.3.2.1.6.8 | DisplayString | read-write | current |
| apLogSelectedAPsTable OBJECT-TYPE Table containing a list of APs for which log collection is supported. | 1.3.6.1.4.1.4329.15.3.2.1.6.9 | not-accessible | current | |
| apLogSelectedAPsEntry OBJECT-TYPE Configuration information of an AP which supports the AP log feature. | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1 | not-accessible | current | |
| apSerialNo OBJECT-TYPE Table index for the apLogSelectedAPs. The AP's serial number serves as the index. | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1 | OCTET STRING (SIZE(16)) | not-accessible | current |
| select OBJECT-TYPE Indicates whether logs are collected from the AP. | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.2 | TruthValue | read-write | current |
| apLogQuickSelectedOption OBJECT-TYPE This is a quick select option for the user to perform the AP's bulk selection. This field is write-only and read access returns unknown(0) value. 0 : unknown. 1 : add all APs. 2 : add all local APs. 3 : add all foreign APs. 4 : remove all APs. 5 : remove all local APs. 6 : remove all foreign APs. | 1.3.6.1.4.1.4329.15.3.2.1.6.10 | INTEGER {unknown(0), addAll(1), addAllLocal(2), addAllForeign(3), removeAll(4), removeAllLocal(5), removeAllForeign(6)} | read-write | current |
| apLogFileUtility OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.1.7 | |||
| apLogFileUtilityLimit OBJECT-TYPE The maximum number of AP log file copy requests that can be held in the apLogFileCopyTable. A value of 0 indicates no configured limit. | 1.3.6.1.4.1.4329.15.3.2.1.7.1 | Unsigned32 (0..4294967295) | read-only | current |
| apLogFileUtilityCurrent OBJECT-TYPE The number of AP log file copy requests currently in the apLogFileCopyTable. | 1.3.6.1.4.1.4329.15.3.2.1.7.2 | Gauge32 | read-only | current |
| apLogFileCopyTable OBJECT-TYPE List of AP log file copy requests. | 1.3.6.1.4.1.4329.15.3.2.1.7.5 | not-accessible | current | |
| apLogFileCopyEntry OBJECT-TYPE An entry describing the AP log file copy request. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1 | not-accessible | current | |
| apLogFileCopyIndex OBJECT-TYPE The index for this AP log file copy request. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| apLogFileCopyDestination OBJECT-TYPE Destination where the log file will be copied. If the local flash is not mounted, then you can not select 1. 1 : copy the local AP log file to flash. 2 : copy the local AP log file to remote server. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.2 | INTEGER {flash(1), remoteServer(2)} | read-write | current |
| apLogFileCopyProtocol OBJECT-TYPE File transfer protocol to be used to copy the log file. 0 : ftp. 1 : scp. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.3 | INTEGER {ftp(0), scp(1)} | read-write | current |
| apLogFileCopyServerIP OBJECT-TYPE The IP address of the remote server. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.4 | IpAddress | read-write | current |
| apLogFileCopyUserID OBJECT-TYPE The user ID that is used for access to the remote server. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.5 | DisplayString | read-write | current |
| apLogFileCopyPassword OBJECT-TYPE The user password that is used for access to the remote server. This field can only be viewed in SNMPv3 mode with privacy. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.6 | DisplayString | read-write | current |
| apLogFileCopyServerDirectory OBJECT-TYPE The directory on the remote server. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.7 | DisplayString | read-write | current |
| apLogFileCopyOperation OBJECT-TYPE If this field is set to 1, then the controller will start to perform the copy action. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.8 | INTEGER {start(1)} | read-create | current |
| apLogFileCopyOperationStatus OBJECT-TYPE The operational state of the AP log file copy request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - Indicates that the AP log file copy described by this row is ready to run and waiting in a queue. running - Indicates that the AP log file copy described by this row is running. success - Indicates that the AP log file copy described by this row has successfully run to completion. failure - Indicates that the AP log file copy described by this row has failed to run to completion. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.9 | INTEGER {inactive(1), pending(2), running(3), success(4), failure(5)} | read-only | current |
| apLogFileCopyRowStatus OBJECT-TYPE Row status variable for row operations on the apLogFileCopyTable. | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.10 | RowStatus | read-create | current |
| dnsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.2 | |||
| primaryDNS OBJECT-TYPE Primary DNS address configured in the Controller. | 1.3.6.1.4.1.4329.15.3.2.2.1 | IpAddress | read-write | current |
| secondaryDNS OBJECT-TYPE Secondary DNS address configured in the Controller. | 1.3.6.1.4.1.4329.15.3.2.2.2 | IpAddress | read-write | current |
| tertiaryDNS OBJECT-TYPE Third DNS address configured in the Controller. | 1.3.6.1.4.1.4329.15.3.2.2.3 | IpAddress | read-write | current |
| mgmtPortObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.3 | |||
| mgmtPortIfIndex OBJECT-TYPE ifIndex of the management port. | 1.3.6.1.4.1.4329.15.3.2.3.1 | Integer32 | read-only | current |
| mgmtPortHostname OBJECT-TYPE Hostname of the management port. | 1.3.6.1.4.1.4329.15.3.2.3.2 | DisplayString | read-write | current |
| mgmtPortDomain OBJECT-TYPE Domain of the management port. | 1.3.6.1.4.1.4329.15.3.2.3.5 | DisplayString | read-write | current |
| physicalPortObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.4 | |||
| physicalPortCount OBJECT-TYPE Number of rows in routerPortsTable. | 1.3.6.1.4.1.4329.15.3.2.4.1 | Integer32 | read-only | current |
| physicalPortsTable OBJECT-TYPE Table of router ports on the controller. | 1.3.6.1.4.1.4329.15.3.2.4.2 | not-accessible | deprecated | |
| physicalPortsEntry OBJECT-TYPE An entry in routerPortsTable. | 1.3.6.1.4.1.4329.15.3.2.4.2.1 | not-accessible | deprecated | |
| portMgmtTrafficEnable OBJECT-TYPE Determines whether controller management network traffic is allowed over this interface. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.1 | TruthValue | read-write | deprecated |
| portDuplexMode OBJECT-TYPE Duplex mode for the esa ports. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.2 | INTEGER {full(1), half(2), auto(3)} | read-write | deprecated |
| portFunction OBJECT-TYPE Specifies the behavior of the EWC physical ports. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.3 | INTEGER {router(1), host(2), thirdPartyAP(3)} | read-write | deprecated |
| portEnabled OBJECT-TYPE If enabled, the interface administratively is enabled. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | deprecated |
| portName OBJECT-TYPE A textual string containing information about the port. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.5 | OCTET STRING | read-only | deprecated |
| portIpAddress OBJECT-TYPE The IP address of this port. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.6 | IpAddress | read-write | deprecated |
| portMask OBJECT-TYPE The subnet mask associated with the IP address of this port. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.7 | IpAddress | read-write | deprecated |
| portMacAddress OBJECT-TYPE Port's MAC address. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.8 | MacAddress | read-only | deprecated |
| portVlanID OBJECT-TYPE External VLAN tag for the physical port for trasmitted and received packets. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.9 | Integer32 (-1..4094) | read-write | deprecated |
| portDHCPEnable OBJECT-TYPE If enabled, the controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.10 | TruthValue | read-write | deprecated |
| portDHCPGateway OBJECT-TYPE Gateway address to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.11 | DisplayString | read-write | deprecated |
| portDHCPDomain OBJECT-TYPE Domain name to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.12 | DisplayString | read-write | deprecated |
| portDHCPDefaultLease OBJECT-TYPE Default DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.13 | Integer32 | read-write | deprecated |
| portDHCPMaxLease OBJECT-TYPE Maximum DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.14 | Integer32 | read-write | deprecated |
| portDHCPDnsServers OBJECT-TYPE List of DNSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.15 | DisplayString | read-write | deprecated |
| portDHCPWins OBJECT-TYPE List of WINSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | 1.3.6.1.4.1.4329.15.3.2.4.2.1.16 | DisplayString | read-write | deprecated |
| physicalPortsInternalVlanID OBJECT-TYPE Internal VLAN tag to be used for physical ports for which the exernal VLAN tag have not been configured. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | 1.3.6.1.4.1.4329.15.3.2.4.3 | Integer32 (-1..4094) | read-write | current |
| physicalFlash OBJECT-TYPE Flash drive status. | 1.3.6.1.4.1.4329.15.3.2.4.4 | INTEGER {mounted(1), unmounted(2)} | read-only | current |
| phyDHCPRangeTable OBJECT-TYPE phyDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with physical ports. | 1.3.6.1.4.1.4329.15.3.2.4.5 | not-accessible | deprecated | |
| phyDHCPRangeEntry OBJECT-TYPE Configuration information for a DHCP range. | 1.3.6.1.4.1.4329.15.3.2.4.5.1 | not-accessible | deprecated | |
| phyDHCPRangeIndex OBJECT-TYPE Index for the DHCP row element. | 1.3.6.1.4.1.4329.15.3.2.4.5.1.1 | Integer32 (1..2147483647) | read-write | deprecated |
| phyDHCPRangeStart OBJECT-TYPE First IP address in the range. | 1.3.6.1.4.1.4329.15.3.2.4.5.1.2 | IpAddress | read-write | deprecated |
| phyDHCPRangeEnd OBJECT-TYPE Last IP address in the range. | 1.3.6.1.4.1.4329.15.3.2.4.5.1.3 | IpAddress | read-write | deprecated |
| phyDHCPRangeType OBJECT-TYPE Determines whether addresses in the specified range will be included, or excluded by the DHCP server. | 1.3.6.1.4.1.4329.15.3.2.4.5.1.4 | INTEGER {inclusion(1), exclusion(2)} | read-write | deprecated |
| phyDHCPRangeStatus OBJECT-TYPE Row status variable for row operations on the phyDHCPRangeTable | 1.3.6.1.4.1.4329.15.3.2.4.5.1.5 | RowStatus | read-write | deprecated |
| layerTwoPortTable OBJECT-TYPE This table contains all layer two ports. | 1.3.6.1.4.1.4329.15.3.2.4.6 | not-accessible | current | |
| layerTwoPortEntry OBJECT-TYPE Entry for a layer two port. | 1.3.6.1.4.1.4329.15.3.2.4.6.1 | not-accessible | current | |
| layerTwoPortName OBJECT-TYPE Text string identifying the port within the controller. | 1.3.6.1.4.1.4329.15.3.2.4.6.1.1 | DisplayString (SIZE(1..32)) | read-only | current |
| layerTwoPortMgmtState OBJECT-TYPE This value indicates administrator state of the port. | 1.3.6.1.4.1.4329.15.3.2.4.6.1.2 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| layerTwoPortMacAddress OBJECT-TYPE Port's MAC address. | 1.3.6.1.4.1.4329.15.3.2.4.6.1.3 | MacAddress | read-only | current |
| jumboFrames OBJECT-TYPE Enables support for frames up to 1800 bytes long. jumboFrames support only applies to the controller and compatible APs. | 1.3.6.1.4.1.4329.15.3.2.4.7 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnManagerObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.5 | |||
| vnRole OBJECT-TYPE Specifies the role of this EWC in inter-EWC mobility. None indicates that mobile units cannot roam to or from this EWC. In any EWC cluster, only one EWC should be specified as vnMgr, all others should be have vnRole = vnAgent. | 1.3.6.1.4.1.4329.15.3.2.5.1 | INTEGER {none(1), vnMgr(2), vnAgent(3)} | read-write | current |
| vnIfIndex OBJECT-TYPE ifIndex of the physical port where inter-EWC tunnels terminate. This field has meaning if vnRole is not none(1) | 1.3.6.1.4.1.4329.15.3.2.5.2 | Integer32 | read-write | current |
| vnHeartbeatInterval OBJECT-TYPE The time interval between inter-EWC polling messages. This field has meaning if vnRole is not none(1) | 1.3.6.1.4.1.4329.15.3.2.5.3 | Integer32 | read-write | current |
| vnLocalClients OBJECT-TYPE Number of locally associated clients to this controller that is considered to be their home controller in the mobility zone, which this controller is part of. | 1.3.6.1.4.1.4329.15.3.2.5.4 | Counter32 | read-only | current |
| vnForeignClients OBJECT-TYPE Number of clients that have registered with another controller in the mobility zone, which this controller is part of, and currently have roamed to this controller. | 1.3.6.1.4.1.4329.15.3.2.5.5 | Counter32 | read-only | current |
| vnTotalClients OBJECT-TYPE Number of local and foreign clients on this controller in the Mobility zone. | 1.3.6.1.4.1.4329.15.3.2.5.6 | Counter32 | read-only | current |
| ntpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.6 | |||
| ntpEnabled OBJECT-TYPE Enable or disables support for the Network Time Protocol (NTP). | 1.3.6.1.4.1.4329.15.3.2.6.1 | TruthValue | read-write | current |
| ntpTimezone OBJECT-TYPE Specifies the time zone where this EWC resides. | 1.3.6.1.4.1.4329.15.3.2.6.2 | DisplayString | read-write | current |
| ntpTimeServer1 OBJECT-TYPE Primary NTP server. | 1.3.6.1.4.1.4329.15.3.2.6.3 | DisplayString | read-write | current |
| ntpTimeServer2 OBJECT-TYPE Secondary NTP server. | 1.3.6.1.4.1.4329.15.3.2.6.4 | DisplayString | read-write | current |
| ntpTimeServer3 OBJECT-TYPE Tertiary NTP server. | 1.3.6.1.4.1.4329.15.3.2.6.5 | DisplayString | read-write | current |
| ntpServerEnabled OBJECT-TYPE Enable or disables support for controller as NTP server. | 1.3.6.1.4.1.4329.15.3.2.6.6 | TruthValue | read-write | current |
| controllerStats OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.7 | |||
| tunnelsTxRxBytes OBJECT-TYPE Sum of transmitted and received bytes over all existing tunnels. | 1.3.6.1.4.1.4329.15.3.2.7.1 | Counter64 | read-only | current |
| tunnelCount OBJECT-TYPE Number of connections to other WirelessController controllers. | 1.3.6.1.4.1.4329.15.3.2.7.6 | Integer32 | read-only | current |
| tunnelStatsTable OBJECT-TYPE tunnelStatsTable contains a list of the IP tunnels connected to this EWC for use in inter-EWC mobility. | 1.3.6.1.4.1.4329.15.3.2.7.7 | not-accessible | current | |
| tunnelStatsEntry OBJECT-TYPE Statistics for a mobility tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1 | not-accessible | current | |
| tunnelStartIP OBJECT-TYPE IP address for the start of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.1 | IpAddress | read-write | current |
| tunnelStartHWC OBJECT-TYPE Name of the access controller for the start of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.2 | OCTET STRING | read-write | current |
| tunnelEndIP OBJECT-TYPE IP address for the end of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.3 | IpAddress | read-write | current |
| tunnelEndHWC OBJECT-TYPE Name of the access controller for the end of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.4 | OCTET STRING | read-write | current |
| tunnelStatus OBJECT-TYPE Indicates if the mobility tunnel is up or down. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.5 | INTEGER {disconnected(1), connected(2)} | read-write | current |
| tunnelStatsTxBytes OBJECT-TYPE Number of bytes have been transmitted from the controller at the start of the tunnel to the controller on the other end of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.6 | Counter32 | read-only | current |
| tunnelStatsRxBytes OBJECT-TYPE Number of bytes have been received by the controller at the end of the tunnel from the controller at the start of the tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.7 | Counter32 | read-only | current |
| tunnelStatsTxRxBytes OBJECT-TYPE Sum of transmitted and received bytes over this tunnel. | 1.3.6.1.4.1.4329.15.3.2.7.7.1.8 | Counter32 | read-only | current |
| clearAccessRejectMsg OBJECT-TYPE Set this OID to one to erase the contents of the accessRejectMessage table. The OID always returns 0 when read. | 1.3.6.1.4.1.4329.15.3.2.7.8 | INTEGER {clear(1)} | read-write | current |
| accessRejectMsgTable OBJECT-TYPE This table lists each of the reply messages returned in RADIUS Access-Reject messages and for each reply message, a count of the number of times it has been received. | 1.3.6.1.4.1.4329.15.3.2.7.9 | not-accessible | current | |
| accessRejectMsgEntry OBJECT-TYPE One entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and count of this message. | 1.3.6.1.4.1.4329.15.3.2.7.9.1 | not-accessible | current | |
| armIndex OBJECT-TYPE A number uniquely identifying each conceptual row in the accessRejectMsgTable. | 1.3.6.1.4.1.4329.15.3.2.7.9.1.1 | Integer32 (1..100) | not-accessible | current |
| armCount OBJECT-TYPE Count of the number of times the controller has received an Access-Reject response from a RADIUS server that contained the associated armReplyMessage. | 1.3.6.1.4.1.4329.15.3.2.7.9.1.2 | Counter64 | read-only | current |
| armReplyMessage OBJECT-TYPE A reply message attribute received by the controller from a RADIUS server in an Access-Reject message. | 1.3.6.1.4.1.4329.15.3.2.7.9.1.3 | DisplayString | read-only | current |
| availability OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.8 | |||
| availabilityStatus OBJECT-TYPE This field can be used to enable or disable availability. If it is set to paired(1), then availability is enabled on this controller, otherwise it is considered that the controller operates in stand-alone mode. All other availability fields have no meaning if this field is set to standalone(0). | 1.3.6.1.4.1.4329.15.3.2.8.1 | INTEGER {standalone(0), paired(1)} | read-write | current |
| pairIPAddress OBJECT-TYPE IP address of paired controller in availability pairing mode. | 1.3.6.1.4.1.4329.15.3.2.8.2 | IpAddress | read-write | current |
| hwcAvailabilityRank OBJECT-TYPE Rank of controller in Availability pairing mode. This is legacy field and applies to releases before 5.x and in current releases it is used for reporting only. | 1.3.6.1.4.1.4329.15.3.2.8.3 | INTEGER {notConfigured(0), secondary(1), primary(2)} | read-write | current |
| fastFailover OBJECT-TYPE Enables or disables fast failover when controller operates in Availability pairing mode. | 1.3.6.1.4.1.4329.15.3.2.8.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| detectLinkFailure OBJECT-TYPE Time to detect link failure between two controllers in availability pairing. The value can be set to values between 2-30 seconds | 1.3.6.1.4.1.4329.15.3.2.8.5 | Unsigned32 (2..30) | read-write | current |
| synchronizeSystemConfig OBJECT-TYPE If this flag is set to enabled then system configuration is synchronized between paired controllers operating in Availabilty pairing mode. | 1.3.6.1.4.1.4329.15.3.2.8.6 | TruthValue | read-write | current |
| synchronizeGuestPort OBJECT-TYPE If this flag is set to enabled then Guest Portal user accounts are synchronized between paired controllers operating in Availabilty pairing mode. | 1.3.6.1.4.1.4329.15.3.2.8.7 | TruthValue | read-write | current |
| secureConnection OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.9 | |||
| weakCipherEnable OBJECT-TYPE By default usage of weak cipher is enabled on EWC. Weak cipher can be disabled using this field. | 1.3.6.1.4.1.4329.15.3.2.9.1 | INTEGER {disable(0), enable(1)} | read-write | current |
| dashboard OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.10 | |||
| licensingInformation OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.10.1 | |||
| licenseRegulatoryDomain OBJECT-TYPE Regulatory domain that this wireless controller system has been licensed for to operate. | 1.3.6.1.4.1.4329.15.3.2.10.1.1 | DisplayString | read-only | current |
| licenseType OBJECT-TYPE Type of license for the controller. Temporary lincese allows controller to operate within defined number of days after which a permanent license is required for the operation of the controller system. | 1.3.6.1.4.1.4329.15.3.2.10.1.2 | INTEGER {permanent(1), temporary(2)} | read-only | current |
| licenseDaysRemaining OBJECT-TYPE Number of days is left for the temporary license to expire. This value has meaning if the license type is temporary(1). | 1.3.6.1.4.1.4329.15.3.2.10.1.3 | Unsigned32 | read-only | current |
| licenseAvailableAP OBJECT-TYPE If licenseMode is standAlone, this is the maximum number of APs that can be active on the controller without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair without violating the licensing agreement. | 1.3.6.1.4.1.4329.15.3.2.10.1.4 | Unsigned32 | read-only | current |
| licenseInServiceRadarAP OBJECT-TYPE If licenseMode is standalone this is the maximum number of APs that can be active on this controller and can operate as Guardians or in-service Radar APs without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair and can operate as Guardians or in-service Radar APs without violating the licensing agreement. | 1.3.6.1.4.1.4329.15.3.2.10.1.5 | Unsigned32 | read-only | current |
| licenseMode OBJECT-TYPE License mode determines how to interpret the license capacity OIDs. licenseMode is standalone if the controller is not part of an availability pair. licenseMode is availabilityPaired if the controller is part of an availability pair. | 1.3.6.1.4.1.4329.15.3.2.10.1.6 | INTEGER {standAlone(1), availabilityPaired(2)} | read-only | current |
| licenseLocalAP OBJECT-TYPE The total number of AP capacity licenses installed on this controller. | 1.3.6.1.4.1.4329.15.3.2.10.1.7 | Unsigned32 | read-only | current |
| licenseForeignAP OBJECT-TYPE The total number of AP capacity licenses installed on this controller's availability partner. | 1.3.6.1.4.1.4329.15.3.2.10.1.8 | Unsigned32 | read-only | current |
| licenseLocalRadarAP OBJECT-TYPE The total number of AP Radar capacity licenses installed on this controller. | 1.3.6.1.4.1.4329.15.3.2.10.1.9 | Unsigned32 | read-only | current |
| licenseForeignRadarAP OBJECT-TYPE The total number of AP Radar capacity licenses installed on this controller's availability partner. | 1.3.6.1.4.1.4329.15.3.2.10.1.10 | Unsigned32 | read-only | current |
| stationsByProtocol OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.2.10.2 | |||
| stationsByProtocolA OBJECT-TYPE Number of stations using 802.11a mode to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.1 | Unsigned32 | read-only | current |
| stationsByProtocolB OBJECT-TYPE Number of stations using 802.11b mode to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.2 | Unsigned32 | read-only | current |
| stationsByProtocolG OBJECT-TYPE Number of stations using 802.11b mode to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.3 | Unsigned32 | read-only | current |
| stationsByProtocolN24 OBJECT-TYPE Number of stations using 802.11n mode with frequency of 2.4Gig to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.4 | Unsigned32 | read-only | current |
| stationsByProtocolN5 OBJECT-TYPE Number of stations using 802.11n mode with frequency of 5Gig to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.5 | Unsigned32 | read-only | current |
| stationsByProtocolUnavailable OBJECT-TYPE The total number of stations with sessions on this controller for which the 802.11 protocol type (a, b, g, n, ac) for which the protocol could not be determined. | 1.3.6.1.4.1.4329.15.3.2.10.2.6 | Unsigned32 | read-only | current |
| stationsByProtocolError OBJECT-TYPE The total number of stations with sessions on this controller for which an AP reported an invalid (out of range) value as the station's 802.11 protocol type. | 1.3.6.1.4.1.4329.15.3.2.10.2.7 | Unsigned32 | read-only | current |
| stationsByProtocolAC OBJECT-TYPE Number of stations using 802.11ac mode to access the network. | 1.3.6.1.4.1.4329.15.3.2.10.2.8 | Unsigned32 | read-only | current |
| apByChannelTable OBJECT-TYPE List of aggregated access points that are operating on a specific wireless channels. | 1.3.6.1.4.1.4329.15.3.2.10.3 | not-accessible | current | |
| apByChannelEntry OBJECT-TYPE An entry in this table for one wireless channel and aggregated access point on that channel. | 1.3.6.1.4.1.4329.15.3.2.10.3.1 | not-accessible | current | |
| apByChannelNumber OBJECT-TYPE The channel on which a set of access points are presently operating. If this number is 0, this means the AP is in Guardian mode or the AP's radios are turned off. | 1.3.6.1.4.1.4329.15.3.2.10.3.1.1 | Unsigned32 | not-accessible | current |
| apByChannelAPs OBJECT-TYPE Total number of the access point on the channel that this row is indexed on. | 1.3.6.1.4.1.4329.15.3.2.10.3.1.2 | Unsigned32 | read-only | current |
| virtualNetworks OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3 | |||
| vnsConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.1 | |||
| vnsCount OBJECT-TYPE Number of VNSes defined in vnsConfigTable. | 1.3.6.1.4.1.4329.15.3.3.1.1 | Integer32 | read-only | current |
| vnsConfigTable OBJECT-TYPE Contains definitions of the Virtual Network Segments defined on this WirelessController. | 1.3.6.1.4.1.4329.15.3.3.1.2 | not-accessible | current | |
| vnsConfigEntry OBJECT-TYPE Configuration elements for a specific Virtual Network Segment. | 1.3.6.1.4.1.4329.15.3.3.1.2.1 | not-accessible | current | |
| vnsDescription OBJECT-TYPE Textual description of the VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.1 | DisplayString | read-write | current |
| vnsAssignmentMode OBJECT-TYPE Determines the method by which mobile units are assigned an address within this VNS. If vnsAssignmentMode = ssid, any client with an SSID matching the VNS will be assigned an address from this VNS. If vnsAssignmentMode == aaa, then address assignment is not completed until after the user is authenticated. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.2 | INTEGER {ssid(1), aaa(2)} | read-write | obsolete |
| vnsMUSessionTimeout OBJECT-TYPE Client session idle time out, in seconds. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.3 | Integer32 | read-write | current |
| vnsAllowMulticast OBJECT-TYPE When true, allows IP multicast packets to be broadcast to the clients on this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.4 | TruthValue | read-write | current |
| vnsSSID OBJECT-TYPE Service Set Identifier (i.e. Network Name) that will be configured on the AccessPoints associated with this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.5 | DisplayString | read-write | current |
| vnsDomain OBJECT-TYPE Domain name to be supplied to the wireless clients if internal DHCP address assignment. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.6 | DisplayString | read-write | current |
| vnsDNSServers OBJECT-TYPE List of DNSs to be supplied to the wireless clients if internal DHCP address assignment. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.7 | DisplayString | read-write | current |
| vnsWINSServers OBJECT-TYPE List of WINSs to be supplied to the wireless clients if internal DHCP address assignment. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.8 | DisplayString | read-write | current |
| vnsAuthModel OBJECT-TYPE vnsAuthModel specifies the authentication method used for clients in the VNS. None indicates that the VNS is open, and no authentication is required. vnsAuthModel=captivePortal may only be specified for a VNS with vnsAssignmentMode=ssid. Likewise, vnsAuthModel=dot1X may only be specified for a VNS with vnsAssignmentMode=aaa. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.9 | INTEGER {none(1), captivePortal(2), dot1X(3)} | read-write | current |
| vnsParentIfIndex OBJECT-TYPE Specifies the ifIndex of the parent VNS, if this VNS is a child. If this is a top level VNS, vnsParentIfIndex will return null or 0. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.10 | Integer32 | read-write | obsolete |
| vnsMgmtTrafficEnable OBJECT-TYPE Specifies whether clients in the VNS have access to EWC management elements. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.11 | TruthValue | read-write | current |
| vnsUseDHCPRelay OBJECT-TYPE This variable indicates what type of DHCP is used for the VNS. none(0): No DHCP server on the VNS. dhcpRelay(1): Uses DHCP relay to reach the DHCP server. localDhcp(2): Uses local DHCP server on the controler. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.12 | INTEGER {none(0), dhcpRelay(1), localDhcp(2)} | read-write | current |
| vns3rdPartyAP OBJECT-TYPE When true, specifies that the VNS contains 3rd party access points. Only one such VNS may be defined for a WirelessController. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.13 | TruthValue | read-write | current |
| vnsStatus OBJECT-TYPE RowStatus variable for performing row operations on vnsConfigTable. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.14 | RowStatus | read-write | current |
| vnsMode OBJECT-TYPE Type of traffic for this VNS. routed(1): The traffic is routed at the controller. bridgeAtController(2): Traffic is bridged at controller. bridgeAtAP(3): Traffic is bridged at Access Points. wds(4): Wireless Distributed System (WDS) type of VNS. If VNS is type of wds(4), then only vnsSupressSSID, vnsDescription and vnsSSID has meaning. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.15 | INTEGER {routed(1), bridgeAtController(2), bridgeAtAP(3), wds(4), thirdParty(5)} | read-write | current |
| vnsVlanID OBJECT-TYPE VLAN tag for the packets trasmitted to/from of the VNS. This value has meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3). If vnsMode = bridgeAtController(2), tagging is done at controller. If vnsMode = bridgeAtAP(3), tagging is done at Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.16 | Integer32 (-1..4094) | read-write | current |
| vnsInterfaceName OBJECT-TYPE Physical interface to be used in the controller for trasmitting/receiving packets for the VNS. This value has meaning if vnsMode is bridgeAtController(2). | 1.3.6.1.4.1.4329.15.3.3.1.2.1.17 | OCTET STRING | read-write | current |
| vnsMgmIpAddress OBJECT-TYPE IP address of the management port associated to this VNS. This value has meaning if vnsMode is bridgeAtController(2). | 1.3.6.1.4.1.4329.15.3.3.1.2.1.18 | IpAddress | read-write | current |
| vnsSuppressSSID OBJECT-TYPE If set to true, this prevents this SSID from appearing in the beacon message. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.19 | TruthValue | read-write | current |
| vnsEnable11hSupport OBJECT-TYPE If true, enables 802.11h support. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.20 | TruthValue | read-write | current |
| vnsApplyPowerBackOff OBJECT-TYPE Indicates whether the AP will direct 802.11h-enabled clients to apply the same power back-off setting that the AP is using | 1.3.6.1.4.1.4329.15.3.3.1.2.1.21 | TruthValue | read-write | current |
| vnsProcessClientIEReq OBJECT-TYPE If true, enables support for 802.11d client information request. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.22 | TruthValue | read-write | current |
| vnsDLSSupportEnable OBJECT-TYPE If true, enables support for DLS Support. This value has meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and vnsMode is select as either routed(1) or bridgeAtController(2). | 1.3.6.1.4.1.4329.15.3.3.1.2.1.23 | TruthValue | read-write | current |
| vnsDLSAddress OBJECT-TYPE DNS IP Address for DLS associated to this VNS. It could be IP address or Name | 1.3.6.1.4.1.4329.15.3.3.1.2.1.24 | DisplayString | read-write | current |
| vnsDLSPort OBJECT-TYPE DNS Port for DLS associated to this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.25 | Integer32 | read-write | current |
| vnsRateControlProfile OBJECT-TYPE The Rate Control Profile that is referenced by this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.26 | DisplayString | read-write | current |
| vnsSessionAvailabilityEnable OBJECT-TYPE To indicate if Session Availability feature is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.27 | TruthValue | read-write | current |
| vnsEnabled OBJECT-TYPE VNS status of being enabled or disabled. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.28 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnsStrictSubnetAdherence OBJECT-TYPE Subnet adherence verification status for the VNS. Controller only learns devices whose address is within range of VNS segment definition. Disabling this field causes to not enforce validation. Doing so, may expose the controller to in-advertent Learning DoS attacks. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.29 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnsSLPEnabled OBJECT-TYPE Status of SLP flag on Bridge at Controller type VNS. This field does not have any meaning for other types of VNS. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.30 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnsConfigWLANID OBJECT-TYPE Creation of VNS requires existing of a free WLAN. One WLAN can only be used in one VNS only. This ID identifies the WLAN that is used for creation of VNS that is identified by this row. | 1.3.6.1.4.1.4329.15.3.3.1.2.1.31 | Unsigned32 | read-write | current |
| vnsDHCPRangeTable OBJECT-TYPE vnsDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.3 | not-accessible | current | |
| vnsDHCPRangeEntry OBJECT-TYPE Configuration information for a DHCP range. | 1.3.6.1.4.1.4329.15.3.3.1.3.1 | not-accessible | current | |
| vnsDHCPRangeIndex OBJECT-TYPE Index for the DHCP row element. | 1.3.6.1.4.1.4329.15.3.3.1.3.1.1 | Integer32 (1..2147483647) | read-write | current |
| vnsDHCPRangeStart OBJECT-TYPE First IP address in the range. | 1.3.6.1.4.1.4329.15.3.3.1.3.1.2 | IpAddress | read-write | current |
| vnsDHCPRangeEnd OBJECT-TYPE Last IP address in the range. | 1.3.6.1.4.1.4329.15.3.3.1.3.1.3 | IpAddress | read-write | current |
| vnsDHCPRangeType OBJECT-TYPE Determines whether addresses in the specified range will be included, or excluded by the DHCP server. | 1.3.6.1.4.1.4329.15.3.3.1.3.1.4 | INTEGER {inclusion(1), exclusion(2)} | read-write | current |
| vnsDHCPRangeStatus OBJECT-TYPE Row status variable for row operations on the vnsDHCPRangeTable | 1.3.6.1.4.1.4329.15.3.3.1.3.1.5 | RowStatus | read-write | current |
| vnsCaptivePortalTable OBJECT-TYPE Details of the Captive Portal login page for VNSes that have vnsAssignment=ssid and vnsAuthModel=captivePortal. | 1.3.6.1.4.1.4329.15.3.3.1.4 | not-accessible | current | |
| vnsCaptivePortalEntry OBJECT-TYPE Captive Portal Information for the VNS. | 1.3.6.1.4.1.4329.15.3.3.1.4.1 | not-accessible | current | |
| cpURL OBJECT-TYPE Redirect URL of the Captive Portal login page. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.1 | DisplayString | read-write | current |
| cpLoginLabel OBJECT-TYPE Label that appears in front of the login field on the Captive Portal login page. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.2 | DisplayString | read-write | deprecated |
| cpPasswordLabel OBJECT-TYPE Label that appears in front of the password field on the Captive Portal login page. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.3 | DisplayString | read-write | deprecated |
| cpHeaderURL OBJECT-TYPE URL of the Captive Portal header. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.4 | DisplayString | read-write | deprecated |
| cpFooterURL OBJECT-TYPE URL of the Captive Portal footer. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.5 | DisplayString | read-write | deprecated |
| cpMessage OBJECT-TYPE A welcome message, or set of instructions that is to appear on the Captive Portal login page. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.6 | DisplayString | read-write | deprecated |
| cpReplaceGatewayWithFQDN OBJECT-TYPE Fully Qualified Domain Name (FQDN) to be used as the gateway IP address. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.7 | DisplayString | read-write | current |
| cpDefaultRedirectionURL OBJECT-TYPE Default Redirect URL of the Captive Portal login page. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.8 | DisplayString | read-write | current |
| cpConnectionIP OBJECT-TYPE IP address of the Controller interface for Captive Portal. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.9 | IpAddress | read-write | current |
| cpConnectionPort OBJECT-TYPE Port number on the cpConnectionIP interface. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.10 | Integer32 | read-write | current |
| cpSharedSecret OBJECT-TYPE Secret Key to be used to encrypt the information passed between the Controller and the external web server. It is the password common to both Controller and the external web server. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.11 | OCTET STRING | read-write | current |
| cpLogOff OBJECT-TYPE Toggles the display of logoff popup screen, allowing users to control their logoff. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.12 | INTEGER {off(0), on(1)} | read-write | current |
| cpStatusCheck OBJECT-TYPE Toggles the display of popup window with session statistics for users to monitor their usage and time left in session. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.13 | INTEGER {off(0), on(1)} | read-write | current |
| cpType OBJECT-TYPE Type of captive portal is enabled for the selected VNS. none(1) = no captive portal configured or type is unknown. internal(2) = internal captive portal. external(4) = external captive portal. guestPortal (5) = open host captive portal. | 1.3.6.1.4.1.4329.15.3.3.1.4.1.14 | INTEGER {none(1), internal(2), external(4), guestPortal(5)} | read-write | current |
| vnsRadiusServerTable OBJECT-TYPE List of RADIUS servers to be utilized for authentication in the VNS. | 1.3.6.1.4.1.4329.15.3.3.1.5 | not-accessible | current | |
| vnsRadiusServerEntry OBJECT-TYPE Configuration information for a RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.1.5.1 | not-accessible | current | |
| vnsRadiusServerName OBJECT-TYPE Name of the RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.1 | DisplayString (SIZE(0..64)) | read-write | current |
| vnsRadiusServerPort OBJECT-TYPE Port number for the RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.2 | Integer32 | read-write | current |
| vnsRadiusServerRetries OBJECT-TYPE Number of retries for a RADIUS authentication request. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.3 | Integer32 | read-write | current |
| vnsRadiusServerTimeout OBJECT-TYPE Delay between requests. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.4 | Integer32 | read-write | current |
| vnsRadiusServerSharedSecret OBJECT-TYPE Shared secret to be used between the NAS and RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.5 | DisplayString | read-write | current |
| vnsRadiusServerNASIdentifier OBJECT-TYPE NAS identifier to be included in RADIUS request. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.6 | DisplayString | read-write | current |
| vnsRadiusServerAuthType OBJECT-TYPE Challenge mechanism for the request. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.7 | INTEGER {pap(0), chap(1), msChap(2), msChapV2(3), notApplicable(4)} | read-write | current |
| vnsRadiusServerRowStatus OBJECT-TYPE RowStatus value for manipulating vnsRADIUSServerTable. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.8 | RowStatus | read-write | current |
| vnsRadiusServerNasAddress OBJECT-TYPE NAS address to be included in RADIUS request. | 1.3.6.1.4.1.4329.15.3.3.1.5.1.9 | IpAddress | read-write | current |
| vnsFilterIDTable OBJECT-TYPE Table of names filters for a VNS. | 1.3.6.1.4.1.4329.15.3.3.1.6 | not-accessible | current | |
| vnsFilterIDEntry OBJECT-TYPE Name of a specific filter in the VNS. | 1.3.6.1.4.1.4329.15.3.3.1.6.1 | not-accessible | current | |
| vnsFilterID OBJECT-TYPE Filter names. | 1.3.6.1.4.1.4329.15.3.3.1.6.1.1 | DisplayString | read-write | current |
| vnsFilterIDStatus OBJECT-TYPE RowStatus for operating on vnsFilterIDTable. | 1.3.6.1.4.1.4329.15.3.3.1.6.1.2 | RowStatus | read-write | current |
| vnsFilterRuleTable OBJECT-TYPE Table containing specific filters for a named filter. | 1.3.6.1.4.1.4329.15.3.3.1.7 | not-accessible | current | |
| vnsFilterRuleEntry OBJECT-TYPE Filter elements for an individual VNS filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1 | not-accessible | current | |
| vnsFilterRuleOrder OBJECT-TYPE Position of the filter in the filter list. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.1 | Integer32 (1..65532) | read-write | current |
| vnsFilterRuleDirection OBJECT-TYPE Traffic direction defined by the rule. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.2 | INTEGER {none(0), in(1), out(2), both(3)} | read-write | current |
| vnsFilterRuleAction OBJECT-TYPE Allow or deny traffic for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.3 | INTEGER {allow(1), disallow(2)} | read-write | current |
| vnsFilterRuleIPAddress OBJECT-TYPE IP address to apply the filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.4 | IpAddress | read-write | current |
| vnsFilterRulePortLow OBJECT-TYPE Low port number for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.5 | Integer32 | read-write | current |
| vnsFilterRulePortHigh OBJECT-TYPE High port number for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.6 | Integer32 | read-write | current |
| vnsFilterRuleProtocol OBJECT-TYPE Specific protocol to filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.7 | INTEGER {none(0), notApplicable(1), tcp(2), udp(3), icmp(4), ipsecESP(5), ipsecAH(6)} | read-write | current |
| vnsFilterRuleEtherType OBJECT-TYPE Specific ethertype to filter. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.8 | INTEGER {none(0), ip(1), arp(2), rarp(3)} | read-write | current |
| vnsFilterRuleStatus OBJECT-TYPE RowStatus value for the vnsFilterRuleTable. | 1.3.6.1.4.1.4329.15.3.3.1.7.1.9 | RowStatus | read-write | current |
| vnsPrivacyTable OBJECT-TYPE Table of privacy settings for the VNS. | 1.3.6.1.4.1.4329.15.3.3.1.8 | not-accessible | current | |
| vnsPrivacyEntry OBJECT-TYPE Configuration values for a specific privacy setting. | 1.3.6.1.4.1.4329.15.3.3.1.8.1 | not-accessible | current | |
| vnsPrivWEPKeyType OBJECT-TYPE Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.1 | INTEGER {none(1), wepstatic(2), wpapsk(3), dynamic(4), wpa(5)} | read-write | current |
| vnsPrivDynamicRekeyFrequency OBJECT-TYPE Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3). For any other values of vnsPrivWEPKeyType, reading or setting this value will return an unsuccessful status and will return a value of null or zero. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.2 | Integer32 | read-write | current |
| vnsPrivWEPKeyLength OBJECT-TYPE WEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of null or zero. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.3 | Integer32 | read-write | current |
| vnsPrivWPA1Enabled OBJECT-TYPE Enables WPA.1 (Wi-Fi Protected Access). | 1.3.6.1.4.1.4329.15.3.3.1.8.1.4 | TruthValue | read-write | current |
| vnsPrivUseSharedKey OBJECT-TYPE Enables the use of WPA shared key for this VNS. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.5 | TruthValue | read-write | current |
| vnsPrivWPASharedKey OBJECT-TYPE The value of the WPA shared key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.6 | DisplayString | read-write | current |
| vnsPrivWPA2Enabled OBJECT-TYPE When true, WPA v.2 support is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.8.1.7 | TruthValue | read-write | current |
| vnsWEPKeyTable OBJECT-TYPE Table of WEP key entries for a static WEP definition. | 1.3.6.1.4.1.4329.15.3.3.1.9 | not-accessible | current | |
| vnsWEPKeyEntry OBJECT-TYPE WEP key for a single entry in the table. | 1.3.6.1.4.1.4329.15.3.3.1.9.1 | not-accessible | current | |
| vnsWEPKeyIndex OBJECT-TYPE Table index for the WEP key. | 1.3.6.1.4.1.4329.15.3.3.1.9.1.1 | Integer32 (1..4) | read-write | current |
| vnsWEPKeyValue OBJECT-TYPE Value of a WEP key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero. | 1.3.6.1.4.1.4329.15.3.3.1.9.1.2 | WEPKeytype | read-write | current |
| vns3rdPartyAPTable OBJECT-TYPE Contains a list of 3rd Party access points for the EWC. | 1.3.6.1.4.1.4329.15.3.3.1.10 | not-accessible | current | |
| vns3rdPartyAPEntry OBJECT-TYPE Configuration information for a 3rd party access point. | 1.3.6.1.4.1.4329.15.3.3.1.10.1 | not-accessible | current | |
| apMacAddress OBJECT-TYPE Ethernet MAC address of the 3rd party access point. | 1.3.6.1.4.1.4329.15.3.3.1.10.1.1 | MacAddress | read-write | current |
| apIpAddress OBJECT-TYPE IP address of the 3rd party access point. | 1.3.6.1.4.1.4329.15.3.3.1.10.1.2 | IpAddress | read-write | current |
| vnsQoSTable OBJECT-TYPE This table contains list of per-VNS QoS related configuration. | 1.3.6.1.4.1.4329.15.3.3.1.11 | not-accessible | current | |
| vnsQoSEntry OBJECT-TYPE An entry related to QoS configuration for the VNS indexed by vnsIfIndex. | 1.3.6.1.4.1.4329.15.3.3.1.11.1 | not-accessible | current | |
| vnsQoSWirelessLegacyFlag OBJECT-TYPE This variable is used to enable/disable legacy QoS feature. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWirelessWMMFlag OBJECT-TYPE This variable is used to enable/disable WMM feature. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWireless80211eFlag OBJECT-TYPE This variable is used to enable/disable 802.11e feature. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWirelessTurboVoiceFlag OBJECT-TYPE This variable is used to enable/disable turbo feature. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSPriorityOverrideFlag OBJECT-TYPE Enable/disable the use of DSCP to override Servic Class (SC) value. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.5 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSPriorityOverrideSC OBJECT-TYPE Service class (SC) of the override value. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.6 | INTEGER {background(0), bestEffort(1), bronze(2), silver(3), gold(4), platinum(5), premiumVoice(6), networkControl(7)} | read-write | current |
| vnsQoSPriorityOverrideDSCP OBJECT-TYPE DSCP override value to be used for the service class. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.7 | Integer32 (0..63) | read-write | current |
| vnsQoSClassificationServiceClass OBJECT-TYPE Service Class value for the DSCP code. This field is 64-bytes long. Each byte represents mapping between DSCP and Service Class. Position of each byte in the array represents DSCP code and the content of each byte represents the service class value for that DSCP code. For example, second byte represents DSCP code 1 and its value represents SC value. Value for each byte is equivalent to either of: background = 0, bestEffort = 1, bronze = 2, silver = 3, gold = 4, platinum = 5, premiumVoice = 6, networkControl = 7 | 1.3.6.1.4.1.4329.15.3.3.1.11.1.8 | OCTET STRING (SIZE(0..64)) | read-write | current |
| vnsQoSWirelessEnableUAPSD OBJECT-TYPE This variable is used to enable/disable U-APSD feature. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.9 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWirelessUseAdmControlVoice OBJECT-TYPE If enabled, admission control for voice traffic is used. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.10 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWirelessUseAdmControlVideo OBJECT-TYPE If enabled, admission control for vedio traffic is used. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.11 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| vnsQoSWirelessULPolicerAction OBJECT-TYPE If doNothing is selected, no action is taken. This is default value. If sendDELTStoClient is selected, AP will send DELTS if a client is abusing in uplink. This field has a meaning only if admission control is enabled for VO or VI. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.12 | INTEGER {doNothing(0), sendDELTStoClient(1)} | read-write | current |
| vnsQoSWirelessDLPolicerAction OBJECT-TYPE If doNothing is selected, no action is taken. This is default value. If downgrade is selected, AP will downgrade all traffic to the highest AC that does not require CAC in downlink. If drop is selected, AP will drop client if it observes a client that is illegally using an AC that has CAC mandatory in downlink. This field has a meaning only if admission control is enabled for VO or VI. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.13 | INTEGER {doNothing(0), downgrade(1), drop(2)} | read-write | current |
| vnsQoSWirelessUseAdmControlBestEffort OBJECT-TYPE If enabled, admission control for video traffic is set to Best Effort. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.14 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnsQoSWirelessUseAdmControlBackground OBJECT-TYPE If enabled, admission control for video traffic is set to Background. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. | 1.3.6.1.4.1.4329.15.3.3.1.11.1.15 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| vnsWDSRFTable OBJECT-TYPE ontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller. | 1.3.6.1.4.1.4329.15.3.3.1.12 | not-accessible | obsolete | |
| vnsWDSRFEntry OBJECT-TYPE Configuration elements for a specific WDS VNS. | 1.3.6.1.4.1.4329.15.3.3.1.12.1 | not-accessible | obsolete | |
| vnsWDSRFAPName OBJECT-TYPE AP name. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.1 | DisplayString | read-write | obsolete |
| vnsWDSRFbgService OBJECT-TYPE Type of service offered by this radio. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.2 | INTEGER {notAvailable(0), none(1), child(2), parent(3), both(4)} | read-write | obsolete |
| vnsWDSRFaService OBJECT-TYPE Type of service offered by this radio. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.3 | INTEGER {notAvailable(0), none(1), child(2), parent(3), both(4)} | read-write | obsolete |
| vnsWDSRFPreferredParent OBJECT-TYPE Desired preferred parent. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.4 | DisplayString | read-write | obsolete |
| vnsWDSRFBackupParent OBJECT-TYPE Desired backup parent. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.5 | DisplayString | read-write | obsolete |
| vnsWDSRFBridge OBJECT-TYPE WDS bridge status. | 1.3.6.1.4.1.4329.15.3.3.1.12.1.6 | INTEGER {bridged(1), notBridged(2)} | read-write | obsolete |
| vnsRateControlProfTable OBJECT-TYPE Table of Rate Control Profiles. | 1.3.6.1.4.1.4329.15.3.3.1.13 | not-accessible | obsolete | |
| vnsRateControlProfEntry OBJECT-TYPE Name of a specific Rate Control Profile. | 1.3.6.1.4.1.4329.15.3.3.1.13.1 | not-accessible | obsolete | |
| vnsRateControlProfInd OBJECT-TYPE A monotonically increasing integer which acts as index of entries within the named Rate Control Profiles. | 1.3.6.1.4.1.4329.15.3.3.1.13.1.1 | Unsigned32 | read-write | obsolete |
| vnsRateControlProfName OBJECT-TYPE Rate Control Profile Name. | 1.3.6.1.4.1.4329.15.3.3.1.13.1.2 | DisplayString | read-write | obsolete |
| vnsRateControlCIR OBJECT-TYPE Rate Control Average Rate (CIR) in kbps. | 1.3.6.1.4.1.4329.15.3.3.1.13.1.3 | Unsigned32 | read-write | obsolete |
| vnsRateControlCBS OBJECT-TYPE Rate Control Burst Size (CBS) in bytes. | 1.3.6.1.4.1.4329.15.3.3.1.13.1.4 | Unsigned32 | read-write | obsolete |
| vnsAPFilterTable OBJECT-TYPE Filters applied to Access Points via VNS settings and assignments. | 1.3.6.1.4.1.4329.15.3.3.1.14 | not-accessible | current | |
| vnsAPFilterEntry OBJECT-TYPE An entry containing filters definition for Access Points assigned to VNS that is identified by VNS index. | 1.3.6.1.4.1.4329.15.3.3.1.14.1 | not-accessible | current | |
| vnsAPFilterRuleOrder OBJECT-TYPE Position of the filter in the filter list. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.1 | Integer32 (1..65535) | read-create | current |
| vnsAPFilterRuleDirection OBJECT-TYPE Traffic direction related to the filter rule. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.2 | INTEGER {in(1), out(2), both(3)} | read-create | current |
| vnsAPFilterAction OBJECT-TYPE Allow or deny traffic for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.3 | Integer32 | read-create | current |
| vnsAPFilterIPAddress OBJECT-TYPE IP address applied to the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.4 | IpAddress | read-create | current |
| vnsAPFilterMask OBJECT-TYPE The mask, number of bits set to one in the mask, applied to filter IP address. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.5 | IpAddress | read-create | current |
| vnsAPFilterPortLow OBJECT-TYPE Low port number for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.6 | Integer32 | read-create | current |
| vnsAPFilterPortHigh OBJECT-TYPE High port number for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.7 | Integer32 | read-create | current |
| vnsAPFilterProtocol OBJECT-TYPE Specific protocol for the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.8 | Integer32 | read-create | current |
| vnsAPFilterEtherType OBJECT-TYPE Specific ethertype to the filter. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.9 | INTEGER {ip(1), arp(2), rarp(3)} | read-create | current |
| vnsAPFilterRowStatus OBJECT-TYPE RowStatus value for this table entry. | 1.3.6.1.4.1.4329.15.3.3.1.14.1.10 | Integer32 | read-create | current |
| vnsStatsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.2 | |||
| activeVNSSessionCount OBJECT-TYPE Number of active VNSs. | 1.3.6.1.4.1.4329.15.3.3.2.1 | Integer32 | read-write | current |
| vnsStatTable OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.2 | not-accessible | obsolete | |
| vnsStatEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.2.1 | not-accessible | obsolete | |
| vnsStatName OBJECT-TYPE Name of the VNS. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.1 | OCTET STRING | read-write | obsolete |
| vnsStatTxPkts OBJECT-TYPE Trasmitted packets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.2 | Counter64 | read-only | obsolete |
| vnsStatRxPkts OBJECT-TYPE Received packtes. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.3 | Counter64 | read-only | obsolete |
| vnsStatTxOctects OBJECT-TYPE Trasmitted octects. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.4 | Counter64 | read-only | obsolete |
| vnsStatRxOctects OBJECT-TYPE Received octets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.5 | Counter64 | read-only | obsolete |
| vnsStatMulticastTxPkts OBJECT-TYPE Multicast trasmitted packets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.6 | Counter64 | read-only | obsolete |
| vnsStatMulticastRxPkts OBJECT-TYPE Multicast received packets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.7 | Counter64 | read-only | obsolete |
| vnsStatBroadcastTxPkts OBJECT-TYPE Broadcast trasmitted packets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.8 | Counter64 | read-only | obsolete |
| vnsStatBroadcastRxPkts OBJECT-TYPE Broadcast received packets. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.9 | Counter64 | read-only | obsolete |
| vnsStatRadiusTotRequests OBJECT-TYPE Total requests sent to radius server. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.10 | Counter64 | read-only | obsolete |
| vnsStatRadiusReqFailed OBJECT-TYPE Requests that failed to be processed by radius server. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.11 | Counter64 | read-only | obsolete |
| vnsStatRadiusReqRejected OBJECT-TYPE Requests that have been rejected by radius server. | 1.3.6.1.4.1.4329.15.3.3.2.2.1.12 | Counter64 | read-only | obsolete |
| vnsExceptionStatTable OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.3 | not-accessible | obsolete | |
| vnsExceptionStatEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.3.1 | not-accessible | obsolete | |
| vnsExceptionFiterName OBJECT-TYPE Filter name. | 1.3.6.1.4.1.4329.15.3.3.2.3.1.1 | OCTET STRING (SIZE(1..64)) | read-write | obsolete |
| vnsExceptionStatPktsDenied OBJECT-TYPE Total packets that are denied by defined filters. | 1.3.6.1.4.1.4329.15.3.3.2.3.1.2 | Counter64 | read-only | obsolete |
| vnsExceptionStatPktsAllowed OBJECT-TYPE Total packets that are allowed by defined filters. | 1.3.6.1.4.1.4329.15.3.3.2.3.1.3 | Counter64 | read-only | obsolete |
| vnsWDSStatTable OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.4 | not-accessible | obsolete | |
| vnsWDSStatEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.3.2.4.1 | not-accessible | obsolete | |
| vnsWDSStatAPName OBJECT-TYPE AP name serving WDS VNS. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.1 | DisplayString | read-write | obsolete |
| vnsWDSStatAPRole OBJECT-TYPE Role of the AP in WDS tree. All the statistics and configuration information in this table has no meaning if the role is unknown(-1). | 1.3.6.1.4.1.4329.15.3.3.2.4.1.2 | INTEGER {unknown(-1), none(0), satellite(1), root(2), repeater(3)} | read-write | obsolete |
| vnsWDSStatAPRadio OBJECT-TYPE Radio and freq on which uplink WDS is established, N/A if connected over etherent (value are 'a:<freq>', 'b/g:<freq>', or 'N/A') | 1.3.6.1.4.1.4329.15.3.3.2.4.1.3 | DisplayString (SIZE(0..15)) | read-write | obsolete |
| vnsWDSStatAPParent OBJECT-TYPE AP Name of the parent AP. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.4 | DisplayString | read-write | obsolete |
| vnsWDSStatSSID OBJECT-TYPE SSID of the WDS VNS where parent WDS link is established. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.5 | DisplayString (SIZE(0..32)) | read-write | obsolete |
| vnsWDSStatRxFrame OBJECT-TYPE Received frames from the parent AP. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.6 | Counter64 | read-write | obsolete |
| vnsWDSStatTxFrame OBJECT-TYPE Transmitted frames to the parent AP. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.7 | Counter64 | read-write | obsolete |
| vnsWDSStatRxError OBJECT-TYPE Received frames in error from the parent AP. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.8 | Counter64 | read-write | obsolete |
| vnsWDSStatTxError OBJECT-TYPE Transmitted frames in error to the parent AP. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.9 | Counter64 | read-write | obsolete |
| vnsWDSStatRxRSSI OBJECT-TYPE Average Received Signal Strength Indicator (RSSI). | 1.3.6.1.4.1.4329.15.3.3.2.4.1.10 | Integer32 (0..64) | read-write | obsolete |
| vnsWDSStatRxRate OBJECT-TYPE Average receive rate. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.11 | Counter64 | read-write | obsolete |
| vnsWDSStatTxRate OBJECT-TYPE Average transmission rate. | 1.3.6.1.4.1.4329.15.3.3.2.4.1.12 | Counter64 | read-write | obsolete |
| vnsGlobalSetting OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3 | |||
| wirelessQoS OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.1 | |||
| maxVoiceBWforReassociation OBJECT-TYPE Maximum voice bandwidth to be used for re-association. | 1.3.6.1.4.1.4329.15.3.3.3.1.1 | Integer32 (0..100) | read-write | current |
| maxVoiceBWforAssociation OBJECT-TYPE Maximum voice bandwidth to be used for association. | 1.3.6.1.4.1.4329.15.3.3.3.1.2 | Integer32 (0..100) | read-write | current |
| maxVideoBWforReassociation OBJECT-TYPE Maximum video bandwidth to be used for re-association. | 1.3.6.1.4.1.4329.15.3.3.3.1.3 | Integer32 (0..100) | read-write | current |
| maxVideoBWforAssociation OBJECT-TYPE Maximum video bandwidth to be used for association. | 1.3.6.1.4.1.4329.15.3.3.3.1.4 | Integer32 (0..100) | read-write | current |
| maxBestEffortBWforReassociation OBJECT-TYPE Maximum best effort bandwidth to be used for reassociation. | 1.3.6.1.4.1.4329.15.3.3.3.1.5 | Integer32 (0..100) | read-write | current |
| maxBestEffortBWforAssociation OBJECT-TYPE Maximum best effort bandwidth to be used for association. | 1.3.6.1.4.1.4329.15.3.3.3.1.6 | Integer32 (0..100) | read-write | current |
| maxBackgroundBWforReassociation OBJECT-TYPE Maximum background bandwidth to be used for reassociation. | 1.3.6.1.4.1.4329.15.3.3.3.1.7 | Integer32 (0..100) | read-write | current |
| maxBackgroundBWforAssociation OBJECT-TYPE Maximum background bandwidth to be used for association. | 1.3.6.1.4.1.4329.15.3.3.3.1.8 | Integer32 (0..100) | read-write | current |
| radiusInfo OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.2 | |||
| externalRadiusServerTable OBJECT-TYPE Table of external RADIUS servers available for authentication services. | 1.3.6.1.4.1.4329.15.3.3.3.2.2 | not-accessible | obsolete | |
| externalRadiusServerEntry OBJECT-TYPE Configuration information about the RADIUS server entry. | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1 | not-accessible | obsolete | |
| externalRadiusServerName OBJECT-TYPE RADIUS server name. | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1 | DisplayString | read-write | obsolete |
| externalRadiusServerAddress OBJECT-TYPE RADIUS server address, it can be either string or IP address. | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2 | DisplayString | read-write | obsolete |
| externalRadiusServerSharedSecret OBJECT-TYPE Shared secret between Radius and the client. | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3 | OCTET STRING (SIZE(0..64)) | read-write | obsolete |
| externalRadiusServerRowStatus OBJECT-TYPE Row Status for the entry. | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4 | RowStatus | read-write | obsolete |
| dasInfo OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.3 | |||
| dasPort OBJECT-TYPE Dynamic Authorization Server (DAS) port. | 1.3.6.1.4.1.4329.15.3.3.3.3.1 | Integer32 (1024..65535) | read-write | current |
| dasReplayInterval OBJECT-TYPE The time window for message timeliness and replay protection for DAS packets. Packets should be dropped that their time generation is outside of this specified interval. Value zero indicates that the timeliness checking will be performed. | 1.3.6.1.4.1.4329.15.3.3.3.3.2 | Integer32 (0..1000) | read-write | current |
| advancedFilteringMode OBJECT-TYPE Value of 'enabled(1)' means EWC is operating in advanced filtering configuration mode. Value of 'disabled(0)' means EWC is operating in mode that is compatible with releases prior to 7.41. This field can only be set to 'enabled(1)' and after setting it to that value, the only way to undo that is by resetting the database. | 1.3.6.1.4.1.4329.15.3.3.3.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| radiusStrictMode OBJECT-TYPE If this variable set to true, then assignment of RADIUS server(s) to WLAN are automatic during WLAN creation, otherwise, assignment of RADIUS server(s) to WLAN must be done manually. | 1.3.6.1.4.1.4329.15.3.3.3.5 | INTEGER {strictModeDisabled(0), strictModeEnabled(1)} | read-write | current |
| radiusFastFailoverEvents OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.6 | |||
| radiusFastFailoverEventsTable OBJECT-TYPE Table in which to configure which RADIUS servers will be sent interim accounting reports for stations when a fast failover incident occurs | 1.3.6.1.4.1.4329.15.3.3.3.6.1 | not-accessible | current | |
| radiusFastFailoverEventsEntry OBJECT-TYPE An entry for each radius server. | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1 | not-accessible | current | |
| radiusFFOEid OBJECT-TYPE The IP address or hostname of configured radius server. If the hostname is created from GUI/CLI and the size is bigger than 64 characters, snmp will display the first 64 characters only. | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.1 | DisplayString (SIZE(1..64)) | not-accessible | current |
| fastFailoverEvents OBJECT-TYPE If true, send an interim accounting record to the RADIUS server for each affected station when a fast failover event occurs. This field can be modified when controller is operated in availablity paired mode and fast failover is enabled | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.2 | INTEGER {fastFailoverEventsDisabled(0), fastFailoverEventsEnabled(1)} | read-write | current |
| dhcpRelayListeners OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.7 | |||
| dhcpRelayListenersMaxEntries OBJECT-TYPE Maximum number of servers to which DHCP messages are relayed . | 1.3.6.1.4.1.4329.15.3.3.3.7.1 | Unsigned32 | read-only | current |
| dhcpRelayListenersNumEntries OBJECT-TYPE The current number of entries in the dhcpRelayListenersTable. | 1.3.6.1.4.1.4329.15.3.3.3.7.2 | Unsigned32 | read-only | current |
| dhcpRelayListenersNextIndex OBJECT-TYPE This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in dhcpRelayListenersTable. An index is considered available if the index falls within the range of 1 to dhcpRelayListenersMaxEntries and it is not being used to index an existing entry in the dhcpRelayListenersTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new dhcpRelayListenersTable creation. | 1.3.6.1.4.1.4329.15.3.3.3.7.3 | Integer32 | read-only | current |
| dhcpRelayListenersTable OBJECT-TYPE A list of servers to which DHCP messages are relayed but from which no responses are expected. | 1.3.6.1.4.1.4329.15.3.3.3.7.4 | not-accessible | current | |
| dhcpRelayListenersEntry OBJECT-TYPE An entry for each dhcpRelayListeners. | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1 | not-accessible | current | |
| dhcpRelayListenersID OBJECT-TYPE The id corresponds to the 'server number' in the controller GUI and CLI. | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.1 | Unsigned32 | not-accessible | current |
| dhcpRelayListenersRowStatus OBJECT-TYPE This object allows dynamic creation and deletion of entries within dhcpRelayListenersTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.2 | RowStatus | read-create | current |
| destinationName OBJECT-TYPE Text string uniquely identifying NAC Server Name. Allowable characters for this field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars Howerver, it is recommended to avoid leading and trailing spaces. | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.3 | DisplayString | read-write | current |
| destinationIP OBJECT-TYPE IPv4 address to which DHCP messages are relayed. | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.4 | IpAddress | read-write | current |
| clientAutologinOption OBJECT-TYPE Many devices such as those made by Apple(R) implement an autologin feature that prompts the user to login as soon as the device detects the presence of a Captive Portal. This feature sometimes causes problems for users who actually interact with the captive portal. hide(0) - Hide the captive portal from Autologin detector. redirect(1) - Redirect detection messages to the Captive Portal. This option is to allow client autologin to detect the captive portal & prompt the user to login. This may cause post-authentication redirection to fail. drop(2) - Drop detection messages. | 1.3.6.1.4.1.4329.15.3.3.3.8 | INTEGER {hide(0), redirect(1), drop(2)} | read-write | current |
| authenticationAdvanced OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.9 | |||
| includeServiceType OBJECT-TYPE Include the Service-Type attribute in client access request messages when this field is set to enable(1). | 1.3.6.1.4.1.4329.15.3.3.3.9.1 | INTEGER {disable(0), enable(1)} | read-write | current |
| clientMessageDelayTime OBJECT-TYPE This field specifies how long, in seconds, the notice Web page is displayed to the client when the topology changes as a result of a role change. The notice Web page indicates that authentication was successful and that the user must close all browser windows and then restart the browser for access to the network. Currently this is supported for Internal Captive Portal, Guest Portal, and Guest Splash. | 1.3.6.1.4.1.4329.15.3.3.3.9.2 | Integer32 | read-write | current |
| radiusAccounting OBJECT-TYPE This field enables or disables RADIUS accounting. Disabling RADIUS accounting overrides the RADIUS accounting settings of individual WLAN Services. Enabling RADIUS accounting activates RADIUS accounting only in WLAN Services specifically configured to perform it. | 1.3.6.1.4.1.4329.15.3.3.3.9.3 | INTEGER {disable(0), enable(1)} | read-write | current |
| serverUsageModel OBJECT-TYPE This field specifies RADIUS server failover behavior when the primary server goes down. When the primary server is down the controller moves on to the secondary or tertiary configured RADIUS Servers. If this field is set to primaryBackup(1), then the controller starts polling the primary RADIUS server to see if it is up. When the primary RADIUS server comes back, the controller automatically starts sending new access requests to the primary RADIUS server but pending requests continue with backup RADIUS server. The administrator can select between the two strategies, i.e. the existing roundRobin(0) or new primaryBackup(1). This only applies to Authentication, not to Accounting. | 1.3.6.1.4.1.4329.15.3.3.3.9.4 | INTEGER {roundRobin(0), primaryBackup(1)} | read-write | current |
| radacctStartOnIPAddr OBJECT-TYPE When this OID is set to disabled (0) the controller sends a RADIUS accounting start message as soon as it receives an Access-Accept for the user from a RADIUS server. When this OID is set to enabled(1) the controller defers sending the RADIUS accounting start message until an Access-Accept for the client is received and the client's IP address is known. | 1.3.6.1.4.1.4329.15.3.3.3.9.5 | INTEGER {disable(0), enable(1)} | read-write | current |
| clientServiceTypeLogin OBJECT-TYPE When this OID is set to enabled(1) the controller sets the Service-Type attribute of a station's Access-Request to 'Login'. When this OID is set to disabled(0) the controller sets the Service-Type attribute of a station's Access-Request to 'Framed'. By default this OID is set to 'disabled'. You cannot use RADIUS servers to authenticate administrators for local server access when this OID is set to 'enabled'. | 1.3.6.1.4.1.4329.15.3.3.3.9.6 | INTEGER {disable(0), enable(1)} | read-write | current |
| applyMacAddressFormat OBJECT-TYPE When this OID is set to enabled(1), the controller uses MAC-Based Authentication MAC address format (refer to radiusMacAddressFormatOption) for user authentication and accounting via RADIUS. | 1.3.6.1.4.1.4329.15.3.3.3.9.7 | INTEGER {disable(0), enable(1)} | read-write | current |
| radiusExtnsSetting OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.10 | |||
| radiusExtnsSettingTable OBJECT-TYPE List of RADIUS servers that will be used. | 1.3.6.1.4.1.4329.15.3.3.3.10.1 | not-accessible | current | |
| radiusExtnsSettingEntry OBJECT-TYPE An entry for each RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1 | not-accessible | current | |
| radiusExtnsIndex OBJECT-TYPE A number uniquely identifying each conceptual row in the radiusExtnsSettingTable. This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-auth-client-mib.txt file. | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| pollingMechanism OBJECT-TYPE This field specifies the method to determine the health of the RADIUS server. If set to useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will be sent to the primary server to determine it's health. If set to authorizeAsActualUser(0), access-request messages for a specified user account will be sent to the primary server to determine it's health. | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.2 | INTEGER {authorizeAsActualUser(0), useRFC5997StatusServerRequest(1)} | read-write | current |
| serverPollingInterval OBJECT-TYPE Interval in seconds for the controller to poll the primary server. | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.3 | Integer32 | read-write | current |
| netflowAndMirrorN OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.3.11 | |||
| netflowDestinationIP OBJECT-TYPE The IP address for the Purview engine that will receive netflow records. | 1.3.6.1.4.1.4329.15.3.3.3.11.1 | IpAddress | read-write | current |
| netflowInterval OBJECT-TYPE The netflow record sending interval. | 1.3.6.1.4.1.4329.15.3.3.3.11.2 | Integer32 (30..360) | read-write | current |
| mirrorFirstN OBJECT-TYPE If non-zero, the first N packets of a particular flow will be mirrored. If 0, all packets will be mirrored. | 1.3.6.1.4.1.4329.15.3.3.3.11.3 | Integer32 | read-write | current |
| mirrorL2Ports OBJECT-TYPE Configure the mirror port(s) on the controller. The default value is None. Only l2ports will be allowed to be selected and only when not referred to elsewhere (lag, topologies). The most significant bit of the most significant octet represents the first esa port (esa0). The second most significant bit of the most significant octet represents the second esa port (esa1) and so on. | 1.3.6.1.4.1.4329.15.3.3.3.11.4 | OCTET STRING | read-write | current |
| radiusMacAddressFormatOption OBJECT-TYPE The controller allows configuring different kinds of Mac address format in RADIUS messages. option1: mac address format as XXXXXXXXXXXX option2: mac address format as XX:XX:XX:XX:XX:XX option3: mac address format as XX-XX-XX-XX-XX-XX option4: mac address format as XXXX.XXXX.XXXX option5: mac address format as XXXXXX-XXXXXX option6: mac address format as XX XX XX XX XX XX option7: mac address format as xxxxxxxxxxxx option8: mac address format as xx:xx:xx:xx:xx:xx option9: mac address format as xx-xx-xx-xx-xx-xx option10: mac address format as xxxx.xxxx.xxxx option11: mac address format as xxxxxx-xxxxxx option12: mac address format as xx xx xx xx xx xx | 1.3.6.1.4.1.4329.15.3.3.3.12 | INTEGER {option1(1), option2(2), option3(3), option4(4), option5(5), option6(6), option7(7), option8(9), option10(10), option11(11), option12(12)} | read-write | current |
| wlan OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.3.4 | |||
| wlanMaxEntries OBJECT-TYPE Maximum number of WLAN supported by the device. | 1.3.6.1.4.1.4329.15.3.3.4.1 | Unsigned32 | read-only | current |
| wlanNumEntries OBJECT-TYPE The current number of entries in the wlanTable. | 1.3.6.1.4.1.4329.15.3.3.4.2 | Unsigned32 | read-only | current |
| wlanTableNextAvailableIndex OBJECT-TYPE This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in wlanTable. An index is considered available if the index falls within the range of 1 to wlanMaxEntries and it is not being used to index an existing entry in the wlanTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new wlanTable creation. | 1.3.6.1.4.1.4329.15.3.3.4.3 | Integer32 | read-only | current |
| wlanTable OBJECT-TYPE Table of configured WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4 | not-accessible | current | |
| wlanEntry OBJECT-TYPE An entry for each WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4.1 | not-accessible | current | |
| wlanID OBJECT-TYPE Unique internal ID associated with WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.1 | Unsigned32 | read-only | current |
| wlanRowStatus OBJECT-TYPE This object allows dynamic creation and deletion of entries within wlanTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. WLAN name must be set before making the row active and persistent. Any WLAN that is associated to a VNS cannot be deleted unless it is first disassociated from VNS before being deleted. Any inactive entry will not be persistent and it will be lost during controller's restart. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.2 | RowStatus | read-write | current |
| wlanServiceType OBJECT-TYPE Service type of WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.3 | INTEGER {standard(0), wds(3), thirdParty(4), remote(5), mesh(6)} | read-write | current |
| wlanName OBJECT-TYPE Text string uniquely identifying WLAN within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.4 | DisplayString | read-write | current |
| wlanSSID OBJECT-TYPE SSID (broadcast string) associated with WLAN. Allowable characters for this field are from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommendedto avoid leading and trailing spaces. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.5 | DisplayString (SIZE(1..32)) | read-write | current |
| wlanSynchronize OBJECT-TYPE If it is set to true, then WLAN will be replicated to peer controller if availability is configured and enabled. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.6 | TruthValue | read-write | current |
| wlanEnabled OBJECT-TYPE This field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic will be passed on behalf of this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.7 | TruthValue | read-write | current |
| wlanDefaultTopologyID OBJECT-TYPE The ID of topology from topologyTable associated to this WLAN. Topology ID of -1 means no default topology is associated to this WLAN. Physical topologies cannot be assigned to WLAN. The default topology indicates which topology to use for this WLAN if there is no topology associated with VNS via policy assignment. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.8 | INTEGER (-1 | 0..65535) | read-write | current |
| wlanSessionTimeout OBJECT-TYPE MU session that is associated to this WLAN will be terminated after elapse of this number of minutes from the start of its current session. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.9 | Unsigned32 | read-write | current |
| wlanIdleTimeoutPreAuth OBJECT-TYPE Elapse time between association and authentication after which MU session will be terminated if the user is idle this amount of time without being authenticated. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.10 | Unsigned32 | read-write | current |
| wlanIdleSessionPostAuth OBJECT-TYPE MU session that is associated to this WLAN will be terminated if the user is idle this amount of time after being authenticated. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.11 | Unsigned32 | read-write | current |
| wlanSupressSSID OBJECT-TYPE If it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted over the air. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.12 | TruthValue | read-write | current |
| wlanDot11hSupport OBJECT-TYPE If it is set to true then dot11h support is enabled for clients associated to this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.13 | TruthValue | read-write | current |
| wlanDot11hClientPowerReduction OBJECT-TYPE If it is set to true then apply power reduction to dot11h clients associated to this WLAN. This field has meaning if wlanDot11hSupport is enabled (set to true). | 1.3.6.1.4.1.4329.15.3.3.4.4.1.14 | TruthValue | read-write | current |
| wlanProcessClientIE OBJECT-TYPE If it is set to true then clients that are associated to this WLAN their IE requests will be processed. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.15 | TruthValue | read-write | current |
| wlanEngerySaveMode OBJECT-TYPE If it is set to true then engergy saving mode is enabled. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.16 | TruthValue | read-write | current |
| wlanBlockMuToMuTraffic OBJECT-TYPE If it is set to true then two MU associated to this WLAN cannot communicate with each other. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.17 | TruthValue | read-write | current |
| wlanRemoteable OBJECT-TYPE If it is set to true then this WLAN can be used as remote WLAN within mobility zone that this controller is partaking. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.18 | TruthValue | read-write | current |
| wlanVNSID OBJECT-TYPE The ID of the VNS that uses this WLAN. WLAN can be created but not used in any VNS, in that case alue of zero indicates WLAN has not been used in any VNS. The value of this field set during VNS creation no during the WLAN creation. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.19 | Unsigned32 | read-only | current |
| wlanRadioManagement11k OBJECT-TYPE When this bit is set to enable, the Radio Management (802.11k) feature is enabled on those APs who have this wlan configuration and 802.11k capability. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.20 | INTEGER {disable(0), enable(1)} | read-write | current |
| wlanBeaconReport OBJECT-TYPE Enable/disable AP to send out beacon report. This field is configurable only if wlanRadioManagement11k is set to enable(1). | 1.3.6.1.4.1.4329.15.3.3.4.4.1.21 | INTEGER {disable(0), enable(1)} | read-write | current |
| wlanQuietIE OBJECT-TYPE Enable/disable AP to advertise a Quiet Element. This field is configurable only if wlanRadioManagement11k is set to enable(1). | 1.3.6.1.4.1.4329.15.3.3.4.4.1.22 | INTEGER {disable(0), enable(1)} | read-write | current |
| wlanMirrorN OBJECT-TYPE prohibited(0): Mirroring is prohibited. bothDirection(1) : Both direction packets will be mirrored. rxDirectionOnly(2): Only receive direction packets will be mirrored. Note: This will only take effect when the user's runtime current Roles's MirrorN action is None. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.23 | INTEGER {prohibited(0), bothDirection(1), rxDirectionOnly(2)} | read-write | current |
| wlanNetFlow OBJECT-TYPE Enable/disable netflow on this WLAN service. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.24 | INTEGER {disable(0), enable(1)} | read-write | current |
| wlanAppVisibility OBJECT-TYPE Enable/disable both application visibility and control for this WLAN service. | 1.3.6.1.4.1.4329.15.3.3.4.4.1.25 | INTEGER {enable(1), disable(2)} | read-write | current |
| wlanStatsTable OBJECT-TYPE Stats related to WLAN (RFS) created on EWC. | 1.3.6.1.4.1.4329.15.3.3.4.5 | not-accessible | current | |
| wlanStatsEntry OBJECT-TYPE An entery for each existing WLAN on EWC. | 1.3.6.1.4.1.4329.15.3.3.4.5.1 | not-accessible | current | |
| wlanStatsID OBJECT-TYPE Unique internal ID associated with WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.5.1.1 | Unsigned32 | read-only | current |
| wlanStatsAssociatedClients OBJECT-TYPE Number of clients that are currently associated to this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.5.1.2 | Counter32 | read-only | current |
| wlanStatsRadiusTotRequests OBJECT-TYPE Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests using SSID associated to the WLAN for association, authentication or authorization to this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.5.1.3 | Counter32 | read-only | current |
| wlanStatsRadiusReqFailed OBJECT-TYPE Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but failed to be processed by RADIUS servers. | 1.3.6.1.4.1.4329.15.3.3.4.5.1.4 | Counter32 | read-only | current |
| wlanStatsRadiusReqRejected OBJECT-TYPE Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but rejected to be processed by RADIUS servers. | 1.3.6.1.4.1.4329.15.3.3.4.5.1.5 | Counter32 | read-only | current |
| wlanPrivTable OBJECT-TYPE This table contains configuration of privacy settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table. | 1.3.6.1.4.1.4329.15.3.3.4.6 | not-accessible | current | |
| wlanPrivEntry OBJECT-TYPE An entry in wlanPrivTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable. | 1.3.6.1.4.1.4329.15.3.3.4.6.1 | not-accessible | current | |
| wlanPrivPrivacyType OBJECT-TYPE Type of privacy applied to the corresponding configured WLAN. Configuration of the other fields in this table depends on the value of this field, e.g. if this field is set to none(0), then no other field in this table are settable. | 1.3.6.1.4.1.4329.15.3.3.4.6.1.1 | INTEGER {none(0), staticWEP(1), dynamicWEP(2), wpa(3), wpaPSK(4)} | read-write | current |
| wlanPrivWEPKeyIndex OBJECT-TYPE Index of configured WEP. This field is required if and only if privacy type is staticWEP(1). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.2 | INTEGER (1..4) | read-write | current |
| wlanPrivWEPKeyLength OBJECT-TYPE Key legnth for the configured WEP key. This field is required if and only if privacy type is staticWEP(1). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.3 | INTEGER {sixtyFourBits(1), oneHundred28Bits(2), oneHundred52Bits(3)} | read-write | current |
| wlanPrivWEPKey OBJECT-TYPE The configured WEP key length must match the wlanPrivWEPKeyLength field. Any key with length longer or shorter than that length will be rejected. This field is required if and only if privacy type is staticWEP(1). This key can only be viewed in SNMPv3 mode with privacy. | 1.3.6.1.4.1.4329.15.3.3.4.6.1.4 | DisplayString (SIZE(8..19)) | read-write | current |
| wlanPrivWPAv1EncryptionType OBJECT-TYPE The type of encryption used for WPA version 1 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV1 (1) or wpaV1andV2 (3). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.5 | INTEGER {undefined(0), tkipOnly(1), auto(2)} | read-write | current |
| wlanPrivWPAv2EncryptionType OBJECT-TYPE The type of encryption used for WPA version 2 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV2 (2) or wpaV1 and V2 (3). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.6 | INTEGER {undefined(0), auto(2), aesOnly(3)} | read-write | current |
| wlanPrivKeyManagement OBJECT-TYPE Key management option available for the WPA2. This field has meaning if privacy type is WPA with WPA2 option enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) and wlanPrivWPAversion set to wpaV2(2) or wpaV1andV2(3). . | 1.3.6.1.4.1.4329.15.3.3.4.6.1.7 | INTEGER {none(0), opportunisticKey(1), preAuthentication(2), both(3)} | read-write | current |
| wlanPrivBroadcastRekeying OBJECT-TYPE Broadcast rekeying if this value is set to true. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.8 | TruthValue | read-write | current |
| wlanPrivRekeyInterval OBJECT-TYPE Interval in seconds for requesting rekeying. This field has meaning if privacy type is WPA and broadcast rekeying is enabled (wlanPrivBroadcastRekeying is set to true). This field can be modified only if wlanPrivBroadcastRekeying is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.6.1.9 | Unsigned32 (30..86400) | read-write | current |
| wlanPrivGroupKPSR OBJECT-TYPE Group Key Power Save Retry (GKPSR) value for the WPA type of privacy. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.10 | TruthValue | read-write | current |
| wlanPrivWPAPSK OBJECT-TYPE WPA-PSK shared key. This field has meaning if and only if WLAN privacy type is set to WPA-PSK. Input type can be either HEX formatted string or ASCII string. In case of HEX string, it must be 64 octets from set of hex characters. In case of ASCII string, the length is limited between 8 to 63 octets. This key can only be viewed in SNMPv3 mode with privacy. This field can be modified only if wlanPrivPrivacyType is set to wpaPSK(4). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.11 | OCTET STRING (SIZE(8..63)) | read-write | current |
| wlanPrivWPAversion OBJECT-TYPE Type of wpa version selected. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). Note: wpa version v1 only is not allowed. 0 - no wpa version selected. 1 - wpa version v1 selected. 2 - wpa version v2 selected. 3 - both wpa version v1 and v2 selected. | 1.3.6.1.4.1.4329.15.3.3.4.6.1.12 | INTEGER {wpaNone(0), wpaV1(1), wpaV2(2), wpaV1andV2(3)} | read-write | current |
| wlanPrivfastTransition OBJECT-TYPE When this field is set to enable(1), the 802.11r (fast transition) is enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(2). | 1.3.6.1.4.1.4329.15.3.3.4.6.1.13 | INTEGER {disable(0), enable(1)} | read-write | current |
| wlanPrivManagementFrameProtection OBJECT-TYPE Disable(0) : The AP will not encrypt any management frames. Enable(1): The AP will encrypt management frames for clients who also support this feature. If the clients do not support this feature, they are still able to connect to the AP but with no management frames encryption. Require(2): The AP will only allow clients who have the PMF feature to connect. Supported management frames will be encrypted to 802.11w standards. Clients who do not support this feature will not be able to associate. | 1.3.6.1.4.1.4329.15.3.3.4.6.1.14 | INTEGER {disable(0), enable(1), require(2)} | read-write | current |
| wlanAuthTable OBJECT-TYPE This table contains configuration of authentication settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | 1.3.6.1.4.1.4329.15.3.3.4.7 | not-accessible | current | |
| wlanAuthEntry OBJECT-TYPE An entry in wlanAuthTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable. Note: All the fields in this table except wlanAuthType and wlanAuthCollectAcctInformation have meaning if MAC-based authentication filed (wlanAuthMacBasedAuth) is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1 | not-accessible | current | |
| wlanAuthType OBJECT-TYPE The type of authentication applied to stations attempting to associate to a BSSID belonging to this WLAN Service. If the dot1x type is selected, then this WLAN must have privacy. When the dot1x or internalCP is selected, the controller must have a RADIUS server, and SNMP will auto assign one RADIUS server to this WLAN if the user did not assign one. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.1 | INTEGER {disabled(1), internalCP(2), dot1x(3), externalCP(4), easyGuestCP(5), guestSplash(6), firewallFriendlyExCP(7)} | read-write | current |
| wlanAuthMacBasedAuth OBJECT-TYPE MAC based authorization is enabled if this field is set to true. When this field set to true, SNMP will auto configure one RADIUS server to enable MAC authorization. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.2 | TruthValue | read-write | current |
| wlanAuthMACBasedAuthOnRoam OBJECT-TYPE If it is set to true, the client will be forced to go through MAC based authorization when the client roamed. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.3 | TruthValue | read-write | current |
| wlanAuthAutoAuthAuthorizedUser OBJECT-TYPE All authorized users will be considered authenticated automatically. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.4 | TruthValue | read-write | current |
| wlanAuthAllowUnauthorizedUser OBJECT-TYPE Unauthorized users will be allowed if this field is set to true.This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.5 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeAP OBJECT-TYPE AP serial number will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.6 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeVNS OBJECT-TYPE VNS name will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.7 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeSSID OBJECT-TYPE WLAN SSID will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.8 | TruthValue | read-write | current |
| wlanAuthRadiusIncludePolicy OBJECT-TYPE Policy name will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.9 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeTopology OBJECT-TYPE Topology name will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.10 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeIngressRC OBJECT-TYPE Ingress rate control name will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.11 | TruthValue | read-write | current |
| wlanAuthRadiusIncludeEgressRC OBJECT-TYPE Egress rate control name will be included in RADIUS request packet as VSA if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.12 | TruthValue | read-write | current |
| wlanAuthCollectAcctInformation OBJECT-TYPE Accounting information is collected for clients if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.13 | TruthValue | read-write | current |
| wlanAuthReplaceCalledStationIDWithZone OBJECT-TYPE Replace called station ID with Zone if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.14 | TruthValue | read-write | current |
| wlanAuthRadiusAcctAfterMacBaseAuthorization OBJECT-TYPE RADIUS accounting begins after MAC-based authorization completes if this field is set to true. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.15 | TruthValue | read-write | current |
| wlanAuthRadiusTimeoutRole OBJECT-TYPE Apply this role to clients when the RADIUS server timed out. '-1' is treat like access reject. Any other number is the Role ID. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.16 | Integer32 | read-write | current |
| wlanAuthRadiusOperatorNameSpace OBJECT-TYPE wlanAuthRadiusOperatorNameSpace is the Namespace ID as defined in RFC 5580. The value within this field contains the operator namespace identifier. The Namespace ID value is encoded in ASCII and has the following values. -1 : disabled. 48 : TADIG. 49 : REALM. 50 : E212. 51 : ICC. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.17 | INTEGER {disabled(-1), tadig(48), realm(49), e212(50), icc(51)} | read-write | current |
| wlanAuthRadiusOperatorName OBJECT-TYPE RADIUS accounting message will include this string when the wlanAuthRadiusOperatorNameSpace is not set to -1. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.18 | DisplayString | read-write | current |
| wlanAuthMACBasedAuthReAuthOnAreaRoam OBJECT-TYPE If this field is set to true, the client will be forced to go through MAC based authorization when the client roams to another area. This field has meaning and can be modified only when wlanAuthMacBasedAuth is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.7.1.19 | TruthValue | read-write | current |
| wlanRadiusTable OBJECT-TYPE This table contains configuration of RADIUS settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | 1.3.6.1.4.1.4329.15.3.3.4.8 | not-accessible | current | |
| wlanRadiusEntry OBJECT-TYPE An entry in wlanRadiusTable for each RADIUS server used by the WLAN indexed by wlanID. | 1.3.6.1.4.1.4329.15.3.3.4.8.1 | not-accessible | current | |
| wlanRadiusIndex OBJECT-TYPE Internally generated index and it has no external meaning. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.1 | Unsigned32 | not-accessible | current |
| wlanRadiusName OBJECT-TYPE Name of the RADIUS server associated to this entry. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.2 | DisplayString | read-write | current |
| wlanRadiusUsage OBJECT-TYPE Usage type associated to this entry for authentication. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.3 | INTEGER {auth(1), mac(2), acc(3)} | read-write | current |
| wlanRadiusPriority OBJECT-TYPE Priority associated to this entry for authentication. RADIUS servers are contacted for authentication requests in the order of their priority defined in this field. The highest priority servers (priorities with lower numerical values have higher priority order) are consulted first for any authentication request. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.4 | Integer32 | read-write | current |
| wlanRadiusPort OBJECT-TYPE The RADIUS authentication requests should be sent to this authentication port. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.5 | Unsigned32 | read-write | current |
| wlanRadiusRetries OBJECT-TYPE Maximum number of retries attempted for an specific authentication request. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.6 | Unsigned32 (1..32) | read-write | current |
| wlanRadiusTimeout OBJECT-TYPE Number of seconds to wait for a response from authentication server for each request sent to the server before considering the request as failure. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.7 | Unsigned32 (1..360) | read-write | current |
| wlanRadiusNASUseVnsIP OBJECT-TYPE If this value is set to true, then VNS IP address associated to the WLAN indexed by wlanID to this entry is used as NAS IP address. Otherwise NAS IP address should be configured manually. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.8 | TruthValue | read-write | current |
| wlanRadiusNASIP OBJECT-TYPE NAS IP associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASUseVnsIP. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.9 | DisplayString | read-write | current |
| wlanRadiusNASIDUseVNSName OBJECT-TYPE If this value is set to true, then use VNS name associated to the WLAN indexed by wlanID for this entry as NAS ID. Otherwise NAS ID should be configured manually. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.10 | TruthValue | read-write | current |
| wlanRadiusNASID OBJECT-TYPE NAS ID associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASIDUseVNSName. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.11 | DisplayString | read-write | current |
| wlanRadiusAuthType OBJECT-TYPE Authentication type used for this WLAN when using this RADIUS server to authenticate users. | 1.3.6.1.4.1.4329.15.3.3.4.8.1.12 | INTEGER {pap(0), chap(1), mschap(2), mschap2(3)} | read-write | current |
| wlanCPTable OBJECT-TYPE This table contains configuration of Captive Portal settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy. | 1.3.6.1.4.1.4329.15.3.3.4.9 | not-accessible | current | |
| wlanCPEntry OBJECT-TYPE An entry in wlanCPTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable and type of CP assigned to the WLAN. If the authentication type is 'disabled(0)' for the WLAN, then all other entries in this table have no meaning. | 1.3.6.1.4.1.4329.15.3.3.4.9.1 | not-accessible | current | |
| wlanCPAuthType OBJECT-TYPE Type of authentication applied to MU requesting association using SSID associated to this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.1 | INTEGER {disabled(1), internalCP(2), dot1x(3), externalCP(4), easyGuestCP(5), guestSplash(6), firewallFriendlyExCP(7)} | read-write | current |
| wlanCP802HttpRedirect OBJECT-TYPE If it is set to true, then CP will be redirected to configured CP. This value has meaning only for CP of the type 'dot1x(3)'. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.2 | TruthValue | read-write | current |
| wlanCPExtConnection OBJECT-TYPE IP address of the interface for this CP. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.3 | IpAddress | read-write | current |
| wlanCPExtPort OBJECT-TYPE The port associated to the CP IP address. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.4 | Unsigned32 (32768..65535) | read-write | current |
| wlanCPExtEnableHttps OBJECT-TYPE HTTPS support is enabled if this field is set to true. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.5 | TruthValue | read-write | current |
| wlanCPExtEncryption OBJECT-TYPE Type of encryption for the CP. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.6 | INTEGER {none(0), legacy(1), aes(2)} | read-write | current |
| wlanCPExtSharedSecret OBJECT-TYPE Shared secret used for this captive portal. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.7 | OCTET STRING (SIZE(16..64)) | read-write | current |
| wlanCPExtTosOverride OBJECT-TYPE Override ToS of NAC server usage only. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.8 | TruthValue | read-write | current |
| wlanCPExtTosValue OBJECT-TYPE ToS value for NAC server only. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.9 | Unsigned32 (0..255) | read-write | deprecated |
| wlanCPExtAddIPtoURL OBJECT-TYPE If this value is set to true, then add EWC IP address and port number to the redirection URL. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.10 | TruthValue | read-write | current |
| wlanCPIntLogoffButton OBJECT-TYPE If set to true provide 'Logoff' button to the user in CP page. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.11 | TruthValue | read-write | current |
| wlanCPIntStatusCheckButton OBJECT-TYPE If set to true provide 'Status Check' button to the user in CP page. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.12 | TruthValue | read-write | current |
| wlanCPReplaceIPwithFQDN OBJECT-TYPE Replace CP gateway IP address with FQDN. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.13 | DisplayString | read-write | current |
| wlanCPSendLoginTo OBJECT-TYPE This field indicates to what URL the successful login session must be redirected. This field qualifies wlanCPRedirectURL. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.14 | INTEGER {originalDestination(0), cpSessionPage(1), customURL(2)} | read-write | current |
| wlanCPRedirectURL OBJECT-TYPE Text string identifying default redirection URL. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.15 | DisplayString | read-write | current |
| wlanCPGuestAccLifetime OBJECT-TYPE This value indicates for how many days the guest account is valid. Value of zero indicates that there is no limit for the guest account. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.16 | Unsigned32 | read-write | current |
| wlanCPGuestAllowedLifetimeAcct OBJECT-TYPE If this value is set to true, then guest admin can obtain lifetime account. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.17 | TruthValue | read-write | current |
| wlanCPGuestSessionLifetime OBJECT-TYPE The guess account session using this CP cannot last longer than this number of hours. Value of zero means there is no limit for the session. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.18 | Unsigned32 | read-write | current |
| wlanCPGuestIDPrefix OBJECT-TYPE The prefix used for guest portal user ID label. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.19 | DisplayString | read-write | current |
| wlanCPGuestMinPassLength OBJECT-TYPE Minimum password length for the guest user account associated to this WLAN. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.20 | Unsigned32 (1..32) | read-write | current |
| wlanCPGuestMaxConcurrentSession OBJECT-TYPE Maximum number of the guest users can use this set of credentials to access this concurrent session. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.21 | Unsigned32 (0..10) | read-write | current |
| wlanCPUseHTTPSforConnection OBJECT-TYPE When this value set to true, use HTTPS for user connection. It has meaning only when wlanCPAuthType is set to internalCP(2) or easyGuestCP(5) or guestSplash(6) | 1.3.6.1.4.1.4329.15.3.3.4.9.1.22 | TruthValue | read-write | current |
| wlanCPIdentity OBJECT-TYPE wlanCPIdentity is used to identify the EWC to the external captive portal server (ECP) and the ECP to the EWC. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.23 | DisplayString | read-write | current |
| wlanCPCustomSpecificURL OBJECT-TYPE After a user successfully logs in, the user will be redirected to the URL as defined in the wlanCPCustomSpecificURL. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.24 | DisplayString | read-write | current |
| wlanCPSelectionOption OBJECT-TYPE Append the above parameter(s) to the EWC captive portal redirection URL if one or more of the bits are set. | 1.3.6.1.4.1.4329.15.3.3.4.9.1.25 | Bits {addEWCPortAndIP(0), apNameAndSerial(1), associatedBSSID(2), vnsName(3), userMacAddress(4), currentlyAssignedRole(5), containmentVLAN(6), timeStamp(7), signature(8), ssid(9)} | read-write | current |
| wlanUnsecuredWlanCounts OBJECT-TYPE Total number of WLAN with security issues. The details of security issues can be found in wlanSecurityReportTable. | 1.3.6.1.4.1.4329.15.3.3.4.10 | Counter32 | read-only | current |
| wlanSecurityReportTable OBJECT-TYPE This table contains the weak configuration settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there exist one entry in this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy. | 1.3.6.1.4.1.4329.15.3.3.4.11 | not-accessible | current | |
| wlanSecurityReportEntry OBJECT-TYPE An entry in wlanSecurityReportTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. | 1.3.6.1.4.1.4329.15.3.3.4.11.1 | not-accessible | current | |
| wlanSecurityReportFlag OBJECT-TYPE Value of secureSetting(2) indicates that WLAN has secure configuration. | 1.3.6.1.4.1.4329.15.3.3.4.11.1.1 | INTEGER {unsecureSetting(1), secureSetting(2)} | read-only | current |
| wlanSecurityReportUnsecureType OBJECT-TYPE bit 0: by setting this bit means this WLAN does not use any kind of encryption bit 1: by setting this bit means this WLAN uses weak WEP encryption bit 2: by setting this bit means this WLAN uses weak tkip encryption bit 3: by setting this bit means this WLAN uses default SSID bit 4: by setting this bit means this WLAN uses HotSpot SSID bit 5: by setting this bit means this WLAN uses Rainbow SSID bit 6: by setting this bit means this WLAN uses dictionary word as an encryption key bit 7: by setting this bit means this WLAN uses dictionary word in an encryption key string bit 8: by setting this bit means this WLAN uses a short password key | 1.3.6.1.4.1.4329.15.3.3.4.11.1.2 | Bits {open(0), wep(1), tkip(2), defaultSsid(3), hotspotSsid(4), rainbowSsid(5), dictionaryWordKey(6), dictionaryWordSubstring(7), passwordTooShort(8)} | read-only | current |
| wlanSecurityReportNotes OBJECT-TYPE Textual description of any security issues related to the WLAN is reflected in this field. | 1.3.6.1.4.1.4329.15.3.3.4.11.1.3 | DisplayString | read-only | current |
| wlanRadiusServerTable OBJECT-TYPE This table contains configuration of RADIUS Servers settings for all configured WLANs on the Wireless Controller. For each of the configured WLANs on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | 1.3.6.1.4.1.4329.15.3.3.4.12 | not-accessible | current | |
| wlanRadiusServerEntry OBJECT-TYPE An entry in wlanRadiusServerTable for each RADIUS server used by the WLAN indexed by wlanID and radiusId. The radiusId is the controller's internal radius server index. | 1.3.6.1.4.1.4329.15.3.3.4.12.1 | not-accessible | current | |
| radiusId OBJECT-TYPE Controller's internal RADIUS index. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.1 | Unsigned32 | not-accessible | current |
| wlanRadiusServerName OBJECT-TYPE Name of the RADIUS server. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.2 | DisplayString | read-only | current |
| wlanRadiusServerUse OBJECT-TYPE use : This means that this WLAN service indexed by wlanID uses this RADIUS server which it is indexed by the radiusId. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.3 | INTEGER {notUse(0), use(1)} | read-write | current |
| wlanRadiusServerUsage OBJECT-TYPE bit 0: By setting this bit, this RADIUS server is used for authentication. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3), or externalCP(4). bit 1: By setting this bit, this RADIUS server is used for MAC-based authentication. This bit has meaning only when wlanAuthMacBasedAuth is set to true. bit 2: By setting this bit, this RADIUS server is used for accounting. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3), or externalCP(4). | 1.3.6.1.4.1.4329.15.3.3.4.12.1.4 | Bits {auth(0), mac(1), acct(2)} | read-write | current |
| wlanRadiusServerAuthUseVNSIPAddr OBJECT-TYPE When this value set to true, use the VNS's IP address as NAS IP address during the authentication. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.5 | TruthValue | read-write | current |
| wlanRadiusServerAuthNASIP OBJECT-TYPE Use this IP address as the NAS IP addresss during the authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.6 | DisplayString | read-write | current |
| wlanRadiusServerAuthUseVNSName OBJECT-TYPE When this value set to true, use the VNS's name as the NAS identifier during the authentication. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.7 | TruthValue | read-write | current |
| wlanRadiusServerAuthNASId OBJECT-TYPE Use this name as the NAS identifier during the authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.8 | DisplayString | read-write | current |
| wlanRadiusServerAuthAuthType OBJECT-TYPE Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.9 | INTEGER {pap(0), chap(1), mschap(2), mschap2(3), eap(4)} | read-write | current |
| wlanRadiusServerAcctUseVNSIPAddr OBJECT-TYPE When this value set to true, use the VNS's IP address as NAS IP address during the accounting. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.10 | TruthValue | read-write | current |
| wlanRadiusServerAcctNASIP OBJECT-TYPE Use this IP address as the NAS IP addresss during the accounting. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.11 | DisplayString | read-write | current |
| wlanRadiusServerAcctUseVNSName OBJECT-TYPE When this value set to true, use the VNS's name as the NAS identifier during the accounting. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.12 | TruthValue | read-write | current |
| wlanRadiusServerAcctNASId OBJECT-TYPE Use this name as the NAS identifier during the accounting. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.13 | DisplayString | read-write | current |
| wlanRadiusServerAcctSIAR OBJECT-TYPE If this value is set to true, then the controller sends interrim accounting records for fast failover events. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.14 | TruthValue | read-write | current |
| wlanRadiusServerMacUseVNSIPAddr OBJECT-TYPE When this value set to true, use the VNS's IP address as NAS IP address during the MAC based authentication. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.15 | TruthValue | read-write | current |
| wlanRadiusServerMacNASIP OBJECT-TYPE Use this IP address as the NAS IP addresss during the MAC based authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.16 | DisplayString | read-write | current |
| wlanRadiusServerMacUseVNSName OBJECT-TYPE When this value set to true, use the VNS's name as the NAS identifier during the MAC based authentication. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.17 | TruthValue | read-write | current |
| wlanRadiusServerMacNASId OBJECT-TYPE Use this name as the NAS identifier during the MAC based authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.18 | DisplayString | read-write | current |
| wlanRadiusServerMacAuthType OBJECT-TYPE Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.19 | INTEGER {pap(0), chap(1), mschap(2), mschap2(3)} | read-write | current |
| wlanRadiusServerMacPW OBJECT-TYPE The password is used for MAC based authentication. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | 1.3.6.1.4.1.4329.15.3.3.4.12.1.20 | DisplayString | read-write | current |
| topology OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.4 | |||
| topologyConfig OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.4.1 | |||
| topologyTable OBJECT-TYPE List of topologies configured on EWC. | 1.3.6.1.4.1.4329.15.3.4.1.1 | not-accessible | current | |
| topologyEntry OBJECT-TYPE Configuration information about a topology in topology table. EWC supports different types of topologies, therefore, for complete configuration of a topology not all fields are necessary to be defined or have meaning. Definition of each field in this table specifies topolog-specific characteristics of the field and its relevance. | 1.3.6.1.4.1.4329.15.3.4.1.1.1 | not-accessible | current | |
| topologyID OBJECT-TYPE Unique internal identifier of the topology. This item is generated internally by EWC and has no external meaning. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.1 | Unsigned32 | not-accessible | current |
| topologyName OBJECT-TYPE Name associated with topology. This name must be unique within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.2 | DisplayString | read-write | current |
| topologyMode OBJECT-TYPE Type of this topology. This field implies the meaning and necessity of other attributes associated to the topology. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.3 | INTEGER {undefined(-1), routed(0), bridgedAtAP(1), bridgedAtAC(2), thirdPartyAP(4), physical(5), management(6)} | read-write | current |
| topologyTagged OBJECT-TYPE If topology is tagged, then a VLAN ID must be assigned to the topology. Meaning associated to this field is topology specific: - For Admin topology (management port) is always untagged - Ror routed topology has no meaning and always untagged - For all other topologies this field is configurable. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.4 | INTEGER {tagged(1), untagged(2)} | read-write | current |
| topologyVlanID OBJECT-TYPE VLAN ID assigned to a tagged topology. For untagged topology this field has no meaning and it is set to -1. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.5 | Integer32 (-1 | 1..4095) | read-write | current |
| topologyEgressPort OBJECT-TYPE Egress port associated to this topology if it is tagged and VLANID defined for the topology. This field is represented as octect string: The most significant bit of most significant octet represent first physical port (lowest number port) and second most significant bit of most significant octet represent second physical port and so on. Meaning associated to this field is topology specific: - For Admin topology (management port) this field has no meaning. - Ror routed topology this field has no meaning - For all other topologies: physical, bridge at controller, and bridge at AP topologies this field is configurable. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.6 | OCTET STRING (SIZE(0..12)) | read-write | current |
| topologyLayer3 OBJECT-TYPE If set to true, then topology has layer three persence. Any topology with layer three presence must have IP address and gateway assigned to it. Meaning associated to this field is topology specific: - For Admin topology (management port) it is always set to true. - Ror bridge at AP this field has no meaning and it is set to false. - For routed and physical topologies it is always set to true. - For bridge at controller type of topology this field is configurable. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.7 | TruthValue | read-write | current |
| topologyIPAddress OBJECT-TYPE IP address assigned to the topology as its interface. Meaning associated to this field is topology specific: - This field has meaning if topology has layer three presence. - Ror bridge at AP this field has no meaning and set 0.0.0.0. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.8 | IpAddress | read-write | current |
| topologyIPMask OBJECT-TYPE Mask for topology's IP address. This field is only applicable to those topologies that have IP address assigned to them, otherwise it is set either to 255.255.255.255 or 0.0.0.0. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.9 | IpAddress | read-write | current |
| topologyMTUsize OBJECT-TYPE Default MTU size for the topology. This field is only configurable for a topologies that has layer three presence. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.10 | Unsigned32 | read-write | current |
| topologyGateway OBJECT-TYPE Gateway associated to this topology. This field has meaning for a topology that has layer three presence. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.11 | IpAddress | read-write | current |
| topologyDHCPUsage OBJECT-TYPE The type of DHCP to be used for IP address assignment to associated MU. This field has meaning only if the topology has layer three persense. Meaning associated to this field is topology specific: - For Admin topology (management port) has no meaning. - Ror bridge at AP this field has no meaning. - For all other topologies that their layer three presence is enabled this field is configurable. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.12 | INTEGER {none(0), useRelay(1), localServer(2)} | read-write | current |
| topologyAPRegistration OBJECT-TYPE If set to true, then AP registration can be achieved using via this topology. Meaning associated to this field is topology specific: - Always false for Admin (management port) and routed topologies - Always false and has no meaning for bridge at AP topology. - For physical and bridge at controller type topologies that have layer three presence this field can be set to either true or false. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.13 | TruthValue | read-write | current |
| topologyManagementTraffic OBJECT-TYPE If set to true, then management data traffic is allowed on this topology. Meaning associated to this field is topology specific: - Always true for Admin topology (management port) - Has no meaning for bridge at AP type topologies - For all other topologies that have layer three presence this field can be set to either true or false. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.14 | TruthValue | read-write | current |
| topologySynchronize OBJECT-TYPE If set to true, then topology must be synchronized with peer controller in availability mode operation. Meaning associated to this field is topology specific: - Always false for Admin topology (management port) - Has no meaning for topologies associated to physical ports. - For all other topologies: bridge at controller, routed and bridge at AP type topologies this field can be set to either true or false. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.15 | TruthValue | read-write | current |
| topologySyncGateway OBJECT-TYPE Gateway associated to synchronized topology. This field has meaning for those topologies that their topologySynchornize field is set to true. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.16 | IpAddress | read-write | current |
| topologySyncMask OBJECT-TYPE Mask of synchronized gateway IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.17 | IpAddress | read-write | current |
| topologySyncIPStart OBJECT-TYPE Range of IP addresses assigned to remote synchronized topology. This IP address represents starting IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.18 | IpAddress | read-write | current |
| topologySyncIPEnd OBJECT-TYPE Range of IP addresses assigned to remote synchronized topology. This IP address represents ending IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.19 | IpAddress | read-write | current |
| topologyStaticIPv6Address OBJECT-TYPE Statically configured IPv6 address assigned to the admin port. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.20 | DisplayString | read-write | current |
| topologyLinkLocalIPv6Address OBJECT-TYPE Automatically generated link-local IPv6 address assigned to the admin port. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.21 | DisplayString | read-only | current |
| topologyPreFixLength OBJECT-TYPE The prfix length of the statically configured IPv6 address of the topology. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.22 | Unsigned32 | read-write | current |
| topologyIPv6Gateway OBJECT-TYPE The gateway of IPv6 address that is associated to the admin topology. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.23 | DisplayString | read-write | current |
| topologyDynamicEgress OBJECT-TYPE Enable/disable dynamic egress for this topology. Dynamic egress allows a station to receive from this VLAN if it can send to this VLAN. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.24 | INTEGER {disable(0), enable(1)} | read-write | current |
| topologyIsGroup OBJECT-TYPE When this flag is yes, this means the topology is created as a group topology. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.25 | INTEGER {no(0), yes(1)} | read-write | current |
| topologyGroupMembers OBJECT-TYPE This field specifies the topologies for this group. This field has meaning only when topologyIsGroup is set to 1. This field is represented as octect string. The most significant bit of the most significant octet of the octet string represents the first topology with topologyID = 0 and second most significant bit of the most significant octet represents the second topology with topologyID = 1 and so on. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.26 | OCTET STRING (SIZE(0..12)) | read-write | current |
| topologyMemberId OBJECT-TYPE -1 : Means this topology is not a member of a group topology. valid topology ID : Means this topology is a member of a configured group topology that has this group topology ID. | 1.3.6.1.4.1.4329.15.3.4.1.1.1.27 | Integer32 | read-write | current |
| topologyStat OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.4.2 | |||
| topoStatTable OBJECT-TYPE Statistics describing traffic transmitted or received for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network. | 1.3.6.1.4.1.4329.15.3.4.2.1 | not-accessible | current | |
| topoStatEntry OBJECT-TYPE Statistic related an entry in topology table. | 1.3.6.1.4.1.4329.15.3.4.2.1.1 | not-accessible | current | |
| topoStatName OBJECT-TYPE Topology name. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.1 | DisplayString | read-only | current |
| topoStatTxPkts OBJECT-TYPE Number of packets transmitted to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.2 | Counter64 | read-only | current |
| topoStatRxPkts OBJECT-TYPE Number of packets received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.3 | Counter64 | read-only | current |
| topoStatTxOctets OBJECT-TYPE Number of octets transmitted in frames to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.4 | Counter64 | read-only | current |
| topoStatRxOctets OBJECT-TYPE Number of octets received in frames from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.5 | Counter64 | read-only | current |
| topoStatMulticastTxPkts OBJECT-TYPE Number of multicast frames transmitted to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.6 | Counter64 | read-only | current |
| topoStatMulticastRxPkts OBJECT-TYPE Number of multicast frames received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.7 | Counter64 | read-only | current |
| topoStatBroadcastTxPkts OBJECT-TYPE Number of broadcast frames transmitted to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.8 | Counter64 | read-only | current |
| topoStatBroadcastRxPkts OBJECT-TYPE Number of broadcast frames received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.9 | Counter64 | read-only | current |
| topoStatFrameChkSeqErrors OBJECT-TYPE Number of frames with checksum errors received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.10 | Counter64 | read-only | current |
| topoStatFrameTooLongErrors OBJECT-TYPE Number of oversized frames received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.1.1.11 | Counter64 | read-only | current |
| topoExceptionStatTable OBJECT-TYPE The table contains list of exception-specific filters statistics for configured topologies in EWC. | 1.3.6.1.4.1.4329.15.3.4.2.2 | not-accessible | current | |
| topoExceptionStatEntry OBJECT-TYPE An entry in topology exception statistic table. | 1.3.6.1.4.1.4329.15.3.4.2.2.1 | not-accessible | current | |
| topoExceptionFiterName OBJECT-TYPE Exception filter name. | 1.3.6.1.4.1.4329.15.3.4.2.2.1.1 | OCTET STRING (SIZE(1..64)) | read-write | current |
| topoExceptionStatPktsDenied OBJECT-TYPE Number of packets that were denied by defined filters since device's last restart. | 1.3.6.1.4.1.4329.15.3.4.2.2.1.2 | Counter64 | read-only | current |
| topoExceptionStatPktsAllowed OBJECT-TYPE Number packets that were allowed by defined filters since device's last restart. | 1.3.6.1.4.1.4329.15.3.4.2.2.1.3 | Counter64 | read-only | current |
| topoWireStatTable OBJECT-TYPE The table contains statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for each topology | 1.3.6.1.4.1.4329.15.3.4.2.3 | not-accessible | deprecated | |
| topoWireStatEntry OBJECT-TYPE Statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network other than to the controller's APs. | 1.3.6.1.4.1.4329.15.3.4.2.3.1 | not-accessible | deprecated | |
| topoWireStatName OBJECT-TYPE Topology name. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.1 | DisplayString | read-only | deprecated |
| topoWireStatTxPkts OBJECT-TYPE Number of packets transmitted unencapsulated to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.2 | Counter64 | read-only | deprecated |
| topoWireStatRxPkts OBJECT-TYPE Number of packets received unencapsulated from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.3 | Counter64 | read-only | deprecated |
| topoWireStatTxOctets OBJECT-TYPE Number of octets transmitted in unencapsulated frames to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.4 | Counter64 | read-only | deprecated |
| topoWireStatRxOctets OBJECT-TYPE Number of octets received in unencapsulated frames to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.5 | Counter64 | read-only | deprecated |
| topoWireStatMulticastTxPkts OBJECT-TYPE Number of multicast frames transmitted unencapsulated to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.6 | Counter64 | read-only | deprecated |
| topoWireStatMulticastRxPkts OBJECT-TYPE Number of multicast frames received unencapsulated from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.7 | Counter64 | read-only | deprecated |
| topoWireStatBroadcastTxPkts OBJECT-TYPE Number of broadcast frames transmitted unencapsulated to the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.8 | Counter64 | read-only | deprecated |
| topoWireStatBroadcastRxPkts OBJECT-TYPE Number of broadcast frames received unencapsulated from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.9 | Counter64 | read-only | deprecated |
| topoWireStatFrameChkSeqErrors OBJECT-TYPE Number of unencapsulated frames with checksum errors received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.10 | Counter64 | read-only | deprecated |
| topoWireStatFrameTooLongErrors OBJECT-TYPE Number of unencapsulated frames with length longer than permitted received from the wired network on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.3.1.11 | Counter64 | read-only | deprecated |
| topoCompleteStatTable OBJECT-TYPE The table contains statistics describing traffic transmitted and received for each topology on both the wired side and the wireless side. | 1.3.6.1.4.1.4329.15.3.4.2.4 | not-accessible | current | |
| topoCompleteStatEntry OBJECT-TYPE Statistics describing traffic transmitted and received on a single topology on both the wired side and the wireless side. | 1.3.6.1.4.1.4329.15.3.4.2.4.1 | not-accessible | current | |
| topoCompleteStatName OBJECT-TYPE Topology name. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.1 | DisplayString | read-only | current |
| topoCompleteStatTxPkts OBJECT-TYPE Number of packets transmitted to the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.2 | Counter64 | read-only | current |
| topoCompleteStatRxPkts OBJECT-TYPE Number of packets received from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.3 | Counter64 | read-only | current |
| topoCompleteStatTxOctets OBJECT-TYPE Number of octets transmitted in frames to the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.4 | Counter64 | read-only | current |
| topoCompleteStatRxOctets OBJECT-TYPE Number of octets received in frames from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.5 | Counter64 | read-only | current |
| topoCompleteStatMulticastTxPkts OBJECT-TYPE Number of multicast frames transmitted to the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.6 | Counter64 | read-only | current |
| topoCompleteStatMulticastRxPkts OBJECT-TYPE Number of multicast frames received from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.7 | Counter64 | read-only | current |
| topoCompleteStatBroadcastTxPkts OBJECT-TYPE Number of broadcast frames transmitted to the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.8 | Counter64 | read-only | current |
| topoCompleteStatBroadcastRxPkts OBJECT-TYPE Number of broadcast frames received from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.9 | Counter64 | read-only | current |
| topoCompleteStatFrameChkSeqErrors OBJECT-TYPE Number of frames with checksum errors received from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.10 | Counter64 | read-only | current |
| topoCompleteStatFrameTooLongErrors OBJECT-TYPE Number of oversized frames received from the wired and wireless networks on the topology/vlan. | 1.3.6.1.4.1.4329.15.3.4.2.4.1.11 | Counter64 | read-only | current |
| accessPoints OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5 | |||
| apConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.1 | |||
| apCount OBJECT-TYPE The count of currently configured AccessPoints associated with this WirelessController. | 1.3.6.1.4.1.4329.15.3.5.1.1 | Integer32 | read-only | current |
| apTable OBJECT-TYPE Contains a list of all configured APs associated with the Wireless Controller. | 1.3.6.1.4.1.4329.15.3.5.1.2 | not-accessible | current | |
| apEntry OBJECT-TYPE Configuration information for an access point. | 1.3.6.1.4.1.4329.15.3.5.1.2.1 | not-accessible | current | |
| apIndex OBJECT-TYPE Table index for the access point. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.1 | Integer32 (1..2147483647) | read-write | current |
| apName OBJECT-TYPE Access Point's name. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.2 | DisplayString | read-write | current |
| apDesc OBJECT-TYPE Text description of the AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.3 | DisplayString | read-write | current |
| apSerialNumber OBJECT-TYPE 16-character serial number of the AccessPoint. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.4 | OCTET STRING (SIZE(16)) | read-only | current |
| apPortifIndex OBJECT-TYPE ifIndex of the physical port to which this AP is assigned. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.5 | InterfaceIndex | read-write | current |
| apWiredIfIndex OBJECT-TYPE ifIndex of the wired interface on the AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.6 | InterfaceIndex | read-write | current |
| apSoftwareVersion OBJECT-TYPE Software version currently installed on the AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.7 | OCTET STRING | read-only | current |
| apSpecific OBJECT-TYPE A link back to the OID under the hiPathWirelessProducts branch that identifies the specific version of this AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.8 | OBJECT IDENTIFIER | read-only | current |
| apBroadcastDisassociate OBJECT-TYPE True indicates that the AP should broadcast disassociation requests, False indicates unicast. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.9 | TruthValue | read-write | current |
| apRowStatus OBJECT-TYPE RowStatus for the apTable. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.10 | RowStatus | read-write | current |
| apVlanID OBJECT-TYPE VLAN tag for the packets trasmitted to/from Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.11 | Integer32 | read-write | current |
| apIpAssignmentType OBJECT-TYPE IP address assignment type, dhcp(1) = uses DHCP to obtain IP address, static(2) = static IP address is assigned to the access point. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.12 | INTEGER {dhcp(1), static(2)} | read-write | current |
| apIfMAC OBJECT-TYPE Acess Point's wired interface MAC address. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.13 | MacAddress | read-only | current |
| apIPAddress OBJECT-TYPE Access Point's wired interface IP address. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.14 | IpAddress | read-write | current |
| apHwVersion OBJECT-TYPE Text description of Access Point's hardware version. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.17 | DisplayString | read-write | current |
| apSwVersion OBJECT-TYPE Text description of Access Point's major software version. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.18 | DisplayString | read-write | current |
| apEnvironment OBJECT-TYPE Access Point's environment. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.19 | INTEGER {indoor(1), outdoor(2)} | read-write | current |
| apHome OBJECT-TYPE Local session is created when access point registers directly with the controller. Foreign session is mirrored session created via availability feature. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.20 | INTEGER {local(1), foreign(2)} | read-write | current |
| apRole OBJECT-TYPE Indicates whether Access Point is a traffic fordwarder, sensor or guardian | 1.3.6.1.4.1.4329.15.3.5.1.2.1.21 | INTEGER {accessPoint(1), sensor(2), guardian(3)} | read-write | current |
| apState OBJECT-TYPE Active means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable has meaning in the context of the controller that query is done. Inactive mean access point has lost the connection with this controller. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.22 | INTEGER {active(1), inactive(2)} | read-write | current |
| apStatus OBJECT-TYPE Registration state for the access point at the time of query, approved(1) means the registration was completed, pending(2) means access point has registered but waiting manual approval from admin. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.23 | INTEGER {approved(1), pending(2)} | read-write | current |
| apPollTimeout OBJECT-TYPE Duration after which the access point's connection to controller is considered has been lost if polling fails. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.24 | Gauge32 (3..3600) | read-write | current |
| apPollInterval OBJECT-TYPE Interval between each poll sent to the controller. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.25 | Gauge32 | read-write | current |
| apTelnetAccess OBJECT-TYPE Indicates whether telnet access is enabled/disabled. This value only applys to AP26xx, W788, W786 and AP4102x APs. 1 : Enabled. 2 : Disabled. 3 : Telnet is not supported. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.26 | INTEGER {enabled(1), disabled(2), na(3)} | read-write | current |
| apMaintainClientSession OBJECT-TYPE If true, Access Point maintains client's session in the event of poll failure. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.27 | TruthValue | read-write | current |
| apRestartServiceContAbsent OBJECT-TYPE If true, Access Point restarts the service in the absence of controller. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.28 | TruthValue | read-write | current |
| apHostname OBJECT-TYPE Hostname assigned to Access Point. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.29 | DisplayString | read-only | current |
| apLocation OBJECT-TYPE Text identifying location of the access point. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.30 | DisplayString | read-write | current |
| apStaticMTUsize OBJECT-TYPE Configured MTU size for the access point. Access point will use the lower value of MTU size between statically configured MTU size and dynamically learned MTU size. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.31 | Unsigned32 (600..1500) | read-write | current |
| apSiteID OBJECT-TYPE The site ID, as defined in siteTable, that this AP is member of. The value of -1 indicates that AP is not member of any site. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.32 | Integer32 | read-write | current |
| apZone OBJECT-TYPE The Zone to which the Access Point belongs. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.33 | DisplayString | read-write | current |
| apLLDP OBJECT-TYPE Enable or disable broadcasting of LLDP information by the wireless AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.34 | TruthValue | read-write | current |
| apSSHAccess OBJECT-TYPE Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.35 | TruthValue | read-write | deprecated |
| apLEDMode OBJECT-TYPE LED status field for the Access Point. off(0): LED is set to off for the AP. wdsSignalStrength(1): LED conveys the strength of the singal, for the details please refer to user manual. indentify(2): Can be used to lacate the AP by making AP to flashing LED repeatedly. normal(3): This indicates AP's normal operational mode. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.36 | INTEGER {off(0), wdsSignalStrength(1), identify(2), normal(3)} | read-write | current |
| apLocationbasedService OBJECT-TYPE Enable or disable the AeroScout or Ekahau location-based service for the Wireless AP. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.37 | TruthValue | read-write | current |
| apSecureTunnel OBJECT-TYPE Enable or disable Secure Tunnel between Ap and Controller | 1.3.6.1.4.1.4329.15.3.5.1.2.1.38 | TruthValue | read-write | current |
| apEncryptCntTraffic OBJECT-TYPE Enable or disable encrypt of control traffic between AP & Controller. This value has meaning only if apSecureTunnel is enabled. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.39 | TruthValue | read-write | current |
| apMICErrorWarning OBJECT-TYPE Enable or disable MIC error warning generation. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.40 | TruthValue | read-write | current |
| apSecureDataTunnelType OBJECT-TYPE secure data tunnel status between controller and acesss point. disable(0): disable encryption of control and data traffic between AP & Controller. encryptControlTraffic(1): encrypt control traffic between AP & Controller. encryptControlDataTraffic(2): encrypt control and data traffic between AP & Controller. debugMode(3): preserve keys without encryption. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.41 | INTEGER {disable(0), encryptControlTraffic(1), encryptControlDataTraffic(2), debugMode(3)} | read-write | current |
| apIPMulticastAssembly OBJECT-TYPE Enable or disable fragmentation/reassembly of the IP Multicast frames transmitted over the tunnel between AP and Controller. When set to true, an IP Multicast frame larger than the tunnel MTU will be fragmented when it is placed into the WASSP tunnel and reassembled on the receiving end of the tunnel before being forwarded to the clients. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.42 | TruthValue | read-write | current |
| apSSHConnection OBJECT-TYPE Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. 1 : Enabled. 2 : Disabled. 3 : SSH is not supported. | 1.3.6.1.4.1.4329.15.3.5.1.2.1.43 | INTEGER {enabled(1), disabled(2), na(3)} | read-write | current |
| apRadioTable OBJECT-TYPE Table access point radio configuration information. | 1.3.6.1.4.1.4329.15.3.5.1.3 | not-accessible | current | |
| apRadioEntry OBJECT-TYPE Configuration information for a radio on the access point. | 1.3.6.1.4.1.4329.15.3.5.1.3.1 | not-accessible | current | |
| apRadioFrequency OBJECT-TYPE The frequency of the radio as supported by the hardware. Supported frequencies are either of 2.5Ghz or 5.0Ghz. | 1.3.6.1.4.1.4329.15.3.5.1.3.1.1 | INTEGER {freq50GHz(1), freq24GHz(2)} | read-only | current |
| apRadioNumber OBJECT-TYPE Access point radios are numbered from 1 in increasing order. This numbering is limited in the context of AP. This field returns the radio number of the AP indexed by apIndex. | 1.3.6.1.4.1.4329.15.3.5.1.3.1.2 | Unsigned32 | read-only | current |
| apRadioType OBJECT-TYPE Indicates the type of radio (a, a/n, a/c, n-strict, c-strict, b, g, b/g, or b/g/n) as it is configured. | 1.3.6.1.4.1.4329.15.3.5.1.3.1.3 | INTEGER {off(0), dot11a(1), dot11an(2), dot11anStrict(3), dot11b(4), dot11g(5), dot11bg(6), dot11gn(7), dot11bgn(8), dot11gnStrict(9), dot11j(10), dot11anc(11), dot11cStrict(12)} | read-write | deprecated |
| apRadioProtocol OBJECT-TYPE Enumerates the possible types of 802.11 radio protocols. | 1.3.6.1.4.1.4329.15.3.5.1.3.1.4 | Bits {dot1124b(0), dot1124g(1), dot1124n(2), dot1150a(3), dot1150ac(4), dot1150j(5), dot1150n(6)} | read-write | current |
| radioVNSTable OBJECT-TYPE Table of VNSs the radio is participating in. | 1.3.6.1.4.1.4329.15.3.5.1.4 | not-accessible | current | |
| radioVNSEntry OBJECT-TYPE Information for a single VNS entry. | 1.3.6.1.4.1.4329.15.3.5.1.4.1 | not-accessible | current | |
| radioIfIndex OBJECT-TYPE Radio participating in the VNS. | 1.3.6.1.4.1.4329.15.3.5.1.4.1.1 | InterfaceIndex | read-write | current |
| vnsIfIndex OBJECT-TYPE ifIndex for the VNS the radio is participating. | 1.3.6.1.4.1.4329.15.3.5.1.4.1.2 | InterfaceIndex | read-write | current |
| radioVNSRowStatus OBJECT-TYPE RowStatus for the radioVNSTable. | 1.3.6.1.4.1.4329.15.3.5.1.4.1.3 | RowStatus | read-write | current |
| apFastFailoverEnable OBJECT-TYPE True indicates that Fast Failover feature is enabled at AP. | 1.3.6.1.4.1.4329.15.3.5.1.5 | TruthValue | read-write | current |
| apLinkTimeout OBJECT-TYPE Time to deteck link failure. The value is in 1-30 seconds. | 1.3.6.1.4.1.4329.15.3.5.1.6 | Integer32 | read-write | current |
| apAntennaTable OBJECT-TYPE Contains a list of antennas configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only. | 1.3.6.1.4.1.4329.15.3.5.1.7 | not-accessible | current | |
| apAntennaEntry OBJECT-TYPE An entry in this table identifying attributes of one antenna for an AP. | 1.3.6.1.4.1.4329.15.3.5.1.7.1 | not-accessible | current | |
| apAntennaIndex OBJECT-TYPE Index of an antenna inside an AP. | 1.3.6.1.4.1.4329.15.3.5.1.7.1.1 | Unsigned32 | not-accessible | current |
| apAntennanName OBJECT-TYPE Textual description identifying the antenna. | 1.3.6.1.4.1.4329.15.3.5.1.7.1.2 | DisplayString | read-only | current |
| apAntennaType OBJECT-TYPE Textual description of antenna type selected for that antenna. | 1.3.6.1.4.1.4329.15.3.5.1.7.1.3 | DisplayString | read-write | current |
| apRadioAntennaTable OBJECT-TYPE Contains a list of Radio configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only. | 1.3.6.1.4.1.4329.15.3.5.1.8 | not-accessible | current | |
| apRadioAntennaEntry OBJECT-TYPE An entry in this table identifying attributes of one radio for an AP. | 1.3.6.1.4.1.4329.15.3.5.1.8.1 | not-accessible | current | |
| apRadioAntennaType OBJECT-TYPE Textual description of antenna type selected for that radio. | 1.3.6.1.4.1.4329.15.3.5.1.8.1.3 | DisplayString | read-only | current |
| apRadioAntennaModel OBJECT-TYPE Antenna type. 0 indicates internal antenna. 1 indicates no antenna. Other value indicates specific external antenna type. | 1.3.6.1.4.1.4329.15.3.5.1.8.1.4 | Unsigned32 | read-only | current |
| apRadioAttenuation OBJECT-TYPE Cumulative attenuation (in dB) of all components (cables, attenuators) between the radio port and the antenna. A professional installer must configure this value so it does not violate country regulations and must verify that it reflects the actual installed components. If this field value is set to -1, then this radio does not support the attenuation configuration. | 1.3.6.1.4.1.4329.15.3.5.1.8.1.5 | Integer32 | read-write | current |
| apStatsObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.2 | |||
| apActiveCount OBJECT-TYPE The count of active AccessPoints associated with this WirelessController. | 1.3.6.1.4.1.4329.15.3.5.2.1 | Integer32 | read-only | current |
| apStatsTable OBJECT-TYPE Table of statistics for the access points. | 1.3.6.1.4.1.4329.15.3.5.2.2 | not-accessible | current | |
| apStatsEntry OBJECT-TYPE Statistics for an access point. | 1.3.6.1.4.1.4329.15.3.5.2.2.1 | not-accessible | current | |
| apInUcastPkts OBJECT-TYPE Number of unicast packets from wireless-to-wired network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.1 | Counter64 | read-only | current |
| apInNUcastPkts OBJECT-TYPE Number of non-unicast packets from wireless-to-wired network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.2 | Counter64 | read-only | current |
| apInOctets OBJECT-TYPE Number of octets from wireless-to-wired network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.3 | Counter64 | read-only | current |
| apInErrors OBJECT-TYPE Number of error packets from wireless-to-wired network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.4 | Counter64 | read-only | current |
| apInDiscards OBJECT-TYPE Number of discarded packets from wireless-to-wired network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.5 | Counter64 | read-only | current |
| apOutUcastPkts OBJECT-TYPE Number of unicast packets from wired-to-wireless network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.6 | Counter64 | read-only | current |
| apOutNUcastPkts OBJECT-TYPE Number of non-unicast packets from wired-to-wireless network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.7 | Counter64 | read-only | current |
| apOutOctets OBJECT-TYPE Number of octets from wired-to-wireless network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.8 | Counter64 | read-only | current |
| apOutErrors OBJECT-TYPE Number of error packets from wired-to-wireless network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.9 | Counter64 | read-only | current |
| apOutDiscards OBJECT-TYPE Number of discarded packets from wired-to-wireless network. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.10 | Counter64 | read-only | current |
| apUpTime OBJECT-TYPE The time (in hundredths of a second) since the management portion of the access point was last re-initialized. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.11 | TimeTicks | read-only | current |
| apCredentialType OBJECT-TYPE Supported certificate type used by AP for commnuication. none(0) = not supported, TLS(1) = Trasport Layer Security (TLS), PEAP(2) = Protected Extensible Authentication Protocol, all(2) = supports all supported EAP. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.12 | INTEGER {none(0), tls(1), peap(2), all(3)} | read-only | current |
| apCertificateExpiry OBJECT-TYPE The number of timeticks from January, 1st, 1970 to the date when the certificate expires (issued certificate no longer is valid). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.13 | TimeTicks | read-only | current |
| apStatsMuCounts OBJECT-TYPE Number of MUs currently associated with this AP. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.14 | Unsigned32 | read-only | current |
| apStatsSessionDuration OBJECT-TYPE Elapse time since the access point's session has started. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.15 | TimeTicks | read-only | current |
| apTotalStationsA OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11 connection mode 'a'. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.16 | Unsigned32 | read-only | current |
| apTotalStationsB OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11 connection mode 'b'. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.17 | Unsigned32 | read-only | current |
| apTotalStationsG OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11 connection mode 'g'. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.18 | Unsigned32 | read-only | current |
| apTotalStationsN50 OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11 connection mode 'n 5.0 Ghz'. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.19 | Unsigned32 | read-only | current |
| apTotalStationsN24 OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11 connection mode 'n 2.4 Ghz'. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.20 | Unsigned32 | read-only | current |
| apInvalidPolicyCount OBJECT-TYPE Number of invalid role has been assigned to the AP | 1.3.6.1.4.1.4329.15.3.5.2.2.1.21 | Unsigned32 | read-only | current |
| apInterfaceMTU OBJECT-TYPE The AP's configured ethernet interface MTU size in bytes. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.22 | Unsigned32 | read-only | current |
| apEffectiveTunnelMTU OBJECT-TYPE The AP Effective Tunnel MTU determines the maximum length of the frames that can be tunnelled without fragmentation, after subtracting the tunnel headers (WASSP and IPSEC). The AP Effective Tunnel MTU is determined for each AP tunnel as minimum between the Static MTU (configurable) and Dynamic MTU (learned from the ICMP path discovery). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.23 | Unsigned32 | read-only | current |
| apTotalStationsAC OBJECT-TYPE Number of MUs that are currently associated to this AP using dot11ac connection mode. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.24 | Unsigned32 | read-only | current |
| apTotalStationsAInOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11a. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.25 | Counter64 | read-only | current |
| apTotalStationsAOutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11a. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.26 | Counter64 | read-only | current |
| apTotalStationsBInOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11b. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.27 | Counter64 | read-only | current |
| apTotalStationsBOutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11b. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.28 | Counter64 | read-only | current |
| apTotalStationsGInOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11g. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.29 | Counter64 | read-only | current |
| apTotalStationsGOutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11g. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.30 | Counter64 | read-only | current |
| apTotalStationsN50InOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11n (5Ghz). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.31 | Counter64 | read-only | current |
| apTotalStationsN50OutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11n (5Ghz). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.32 | Counter64 | read-only | current |
| apTotalStationsN24InOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11n (2.4Ghz). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.33 | Counter64 | read-only | current |
| apTotalStationsN24OutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11n (2.4Ghz). | 1.3.6.1.4.1.4329.15.3.5.2.2.1.34 | Counter64 | read-only | current |
| apTotalStationsACInOctets OBJECT-TYPE Number of octets from client to AP for clients using protocol 802.11ac. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.35 | Counter64 | read-only | current |
| apTotalStationsACOutOctets OBJECT-TYPE Number of octets from AP to client for clients using protocol 802.11ac. | 1.3.6.1.4.1.4329.15.3.5.2.2.1.36 | Counter64 | read-only | current |
| apRegistrationRequests OBJECT-TYPE Total registration request have been received by all access points since last reboot. | 1.3.6.1.4.1.4329.15.3.5.2.3 | Counter32 | read-only | current |
| apRadioStatusTable OBJECT-TYPE Table of radio configuration attributes that the AP can change dynamically. It contains one entry for each radio of each active AP. | 1.3.6.1.4.1.4329.15.3.5.2.4 | not-accessible | current | |
| apRadioStatusEntry OBJECT-TYPE The configuration attributes of one AP radio that the AP can change dynamically. | 1.3.6.1.4.1.4329.15.3.5.2.4.1 | not-accessible | current | |
| apRadioStatusChannel OBJECT-TYPE The lowest 20 MHz channel of the 20/40/80 MHz wide channel on which the radio is operating. This can be different from the administratively configured channel as a result of the AP complying with regulatory requirements like DFS or adapting to the RF environment (e.g. DCS). If this field value is set to 0, then this means this radio is off or this AP is in Guardian mode. | 1.3.6.1.4.1.4329.15.3.5.2.4.1.1 | Unsigned32 | read-only | current |
| apRadioStatusChannelWidth OBJECT-TYPE Maximum width of the channel being served by the AP's radio. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment. | 1.3.6.1.4.1.4329.15.3.5.2.4.1.2 | INTEGER {width20Mhz(1), width40Mhz(2), width80Mhz(4)} | read-only | current |
| apRadioStatusChannelOffset OBJECT-TYPE This is the offset (in 20 MHz channels) of the primary channel from the lowest 20 MHz channel within an aggregated channel. The offset can be 0 if the primary channel is the same as the lowest channel or it can be 1,2 or 3 depending on the aggregate channel width. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment. | 1.3.6.1.4.1.4329.15.3.5.2.4.1.3 | Unsigned32 | read-only | current |
| apPerformanceReportByRadioTable OBJECT-TYPE Table of AP performance statistics by radio that the AP can change dynamically. It contains one entry for each radio of each active AP. | 1.3.6.1.4.1.4329.15.3.5.2.5 | not-accessible | current | |
| apPerformanceReportByRadioEntry OBJECT-TYPE The AP radio performance statistics of one AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.5.1 | not-accessible | current | |
| apRadioIndex OBJECT-TYPE Index of an radio inside an AP. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.1 | Integer32 (1..2) | not-accessible | current |
| apPerfRadioPrevPeakChannelUtilization OBJECT-TYPE Peak channel utilization in % from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.2 | Gauge32 | read-only | current |
| apPerfRadioCurPeakChannelUtilization OBJECT-TYPE Peak channel utilization in % of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.3 | Gauge32 | read-only | current |
| apPerfRadioAverageChannelUtilization OBJECT-TYPE Running average of channel utilization in hundredth of a %. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.4 | HundredthOfGauge32 | read-only | current |
| apPerfRadioCurrentChannelUtilization OBJECT-TYPE Channel utilization in % from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.5 | Gauge32 | read-only | current |
| apPerfRadioPrevPeakRSS OBJECT-TYPE Peak RSS in dBm from last 15 minute interval. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.6 | Gauge32 | read-only | current |
| apPerfRadioCurPeakRSS OBJECT-TYPE Peak RSS in dBm of current 15 minute interval. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.7 | Gauge32 | read-only | current |
| apPerfRadioAverageRSS OBJECT-TYPE Running average of RSS in hundredth of a dBm. Value of -10000 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.8 | HundredthOfInt32 | read-only | current |
| apPerfRadioCurrentRSS OBJECT-TYPE RSS in dBm from latest statistics from AP. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.9 | Gauge32 | read-only | current |
| apPerfRadioPrevPeakSNR OBJECT-TYPE Peak SNR in dB from last 15 minute interval. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.10 | Gauge32 | read-only | current |
| apPerfRadioCurPeakSNR OBJECT-TYPE Peak SNR in dB of current 15 minute interval. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.11 | Gauge32 | read-only | current |
| apPerfRadioAverageSNR OBJECT-TYPE Running average of SNR in hundredth of a dB. Value of -10000 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.12 | HundredthOfInt32 | read-only | current |
| apPerfRadioCurrentSNR OBJECT-TYPE SNR in dB from latest statistics from AP. Value of -100 means this field is not available. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.13 | Gauge32 | read-only | current |
| apPerfRadioPrevPeakPktRetx OBJECT-TYPE Peak packet retransmissions in hundredth of pps from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.14 | HundredthOfGauge64 | read-only | current |
| apPerfRadioCurPeakPktRetx OBJECT-TYPE Peak packet retransmissions in hundredth of pps of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.15 | HundredthOfGauge64 | read-only | current |
| apPerfRadioAveragePktRetx OBJECT-TYPE Running average of packet retransmissions in hundredth of pps. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.16 | HundredthOfGauge64 | read-only | current |
| apPerfRadioCurrentPktRetx OBJECT-TYPE Packet retransmissions in hundredth of pps from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.17 | HundredthOfGauge64 | read-only | current |
| apPerfRadioPktRetx OBJECT-TYPE Running counter of number of packet retransmissions. | 1.3.6.1.4.1.4329.15.3.5.2.5.1.18 | Counter64 | read-only | current |
| apAccessibilityTable OBJECT-TYPE A table showing the rate of associations, reassociations and deauthentications/dissassociations from each AP radio. The table contains one row per radio per active AP. | 1.3.6.1.4.1.4329.15.3.5.2.6 | not-accessible | current | |
| apAccessibilityEntry OBJECT-TYPE The accessibility statistics of one AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1 | not-accessible | current | |
| apAccPrevPeakAssocReqRx OBJECT-TYPE Peak number of association requests in hundredth of requests per second received by AP from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.1 | HundredthOfGauge64 | read-only | current |
| apAccCurPeakAssocReqRx OBJECT-TYPE Peak number of association requests in hundredth of requests per second received by AP of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.2 | HundredthOfGauge64 | read-only | current |
| apAccAverageAssocReqRx OBJECT-TYPE Running average of association requests in hundredth of requests per second received by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.3 | HundredthOfGauge64 | read-only | current |
| apAccCurrentAssocReqRx OBJECT-TYPE Association requests in hundredth of requests per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.4 | HundredthOfGauge64 | read-only | current |
| apAccAssocReqRx OBJECT-TYPE Running counter of association requests. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.5 | Counter64 | read-only | current |
| apAccPrevPeakReassocReqRx OBJECT-TYPE Peak number of re-association requests in hundredth of requests per second received by an AP radio from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.6 | HundredthOfGauge64 | read-only | current |
| apAccCurPeakReassocReqRx OBJECT-TYPE Peak number of re-association requests in hundredth of requests per second received by an AP radio of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.7 | HundredthOfGauge64 | read-only | current |
| apAccAverageReassocReqRx OBJECT-TYPE Running average of re-association requests in hundredth of requests per second received by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.8 | HundredthOfGauge64 | read-only | current |
| apAccCurrentReassocReqRx OBJECT-TYPE Re-association requests in hundredth of requests per second received by an AP radio from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.9 | HundredthOfGauge64 | read-only | current |
| apAccReassocReqRx OBJECT-TYPE Running counter of re-association requests received by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.10 | Counter64 | read-only | current |
| apAccPrevPeakDisassocDeauthReqTx OBJECT-TYPE Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.11 | HundredthOfGauge64 | read-only | current |
| apAccCurPeakDisassocDeauthReqTx OBJECT-TYPE Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.12 | HundredthOfGauge64 | read-only | current |
| apAccAverageDisassocDeauthReqTx OBJECT-TYPE Running average of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.13 | HundredthOfGauge64 | read-only | current |
| apAccCurrentDisassocDeauthReqTx OBJECT-TYPE Disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.14 | HundredthOfGauge64 | read-only | current |
| apAccDisassocDeauthReqTx OBJECT-TYPE Running counter of disassociation/deauthentication requests transmitted by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.15 | Counter64 | read-only | current |
| apAccPrevPeakDisassocDeauthReqRx OBJECT-TYPE Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.16 | HundredthOfGauge64 | read-only | current |
| apAccCurPeakDisassocDeauthReqRx OBJECT-TYPE Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.17 | HundredthOfGauge64 | read-only | current |
| apAccAverageDisassocDeauthReqRx OBJECT-TYPE Running average of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.18 | HundredthOfGauge64 | read-only | current |
| apAccCurrentDisassocDeauthReqRx OBJECT-TYPE Disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.19 | HundredthOfGauge64 | read-only | current |
| apAccDisassocDeauthReqRx OBJECT-TYPE Running counter of disassociation/deauthentication requests received by an AP radio. | 1.3.6.1.4.1.4329.15.3.5.2.6.1.20 | Counter64 | read-only | current |
| apPerformanceReportbyRadioAndWlanTable OBJECT-TYPE Table of AP performance statistics by AP, AP radio and WLAN. | 1.3.6.1.4.1.4329.15.3.5.2.7 | not-accessible | current | |
| apPerformanceReportbyRadioAndWlanEntry OBJECT-TYPE The AP performance statistics of one AP radio and WLAN. | 1.3.6.1.4.1.4329.15.3.5.2.7.1 | not-accessible | current | |
| apPerfWlanPrevPeakClientsPerSec OBJECT-TYPE Peak clients per second from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.1 | Gauge32 | read-only | current |
| apPerfWlanCurPeakClientsPerSec OBJECT-TYPE Peak clients per second of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.2 | Gauge32 | read-only | current |
| apPerfWlanAverageClientsPerSec OBJECT-TYPE Running average of clients in hundredth of clients per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.3 | HundredthOfGauge32 | read-only | current |
| apPerfWlanCurrentClientsPerSec OBJECT-TYPE Clients per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.4 | Gauge32 | read-only | current |
| apPerfWlanPrevPeakULOctetsPerSec OBJECT-TYPE Peak uplink octets in hundredth of octets per second from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.5 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurPeakULOctetsPerSec OBJECT-TYPE Peak uplink octets in hundredth of octets per second of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.6 | HundredthOfGauge64 | read-only | current |
| apPerfWlanAverageULOctetsPerSec OBJECT-TYPE Running average of uplink hundredth of octets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.7 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurrentULOctetsPerSec OBJECT-TYPE Uplink octets in hundredth of octets per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.8 | HundredthOfGauge64 | read-only | current |
| apPerfWlanULOctets OBJECT-TYPE Running counter of uplink octets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.9 | Counter64 | read-only | current |
| apPerfWlanPrevPeakULPktsPerSec OBJECT-TYPE Peak uplink packets in hundredth of packets per second from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.10 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurPeakULPktsPerSec OBJECT-TYPE Peak uplink packets in hundredth of packets per second of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.11 | HundredthOfGauge64 | read-only | current |
| apPerfWlanAverageULPktsPerSec OBJECT-TYPE Running average of uplink packets in hundredth of packets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.12 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurrentULPktsPerSec OBJECT-TYPE Uplink packets in hundredth of packets per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.13 | HundredthOfGauge64 | read-only | current |
| apPerfWlanULPkts OBJECT-TYPE Running counter of uplink packets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.14 | Counter64 | read-only | current |
| apPerfWlanPrevPeakDLOctetsPerSec OBJECT-TYPE Peak downlink octets in hundredth of octets per second from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.15 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurPeakDLOctetsPerSec OBJECT-TYPE Peak downlink octets in hundredth of octets per second of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.16 | HundredthOfGauge64 | read-only | current |
| apPerfWlanAverageDLOctetsPerSec OBJECT-TYPE Running average of downlink octets in hundredth of octets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.17 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurrentDLOctetsPerSec OBJECT-TYPE Downlink octets in hundredth octets per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.18 | HundredthOfGauge64 | read-only | current |
| apPerfWlanDLOctets OBJECT-TYPE Running counter of downlink octets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.19 | Counter64 | read-only | current |
| apPerfWlanPrevPeakDLPktsPerSec OBJECT-TYPE Peak downlink packets in hundredth of packets per second from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.20 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurPeakDLPktsPerSec OBJECT-TYPE Peak downlink packets in hundredth of packets per second of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.21 | HundredthOfGauge64 | read-only | current |
| apPerfWlanAverageDLPktsPerSec OBJECT-TYPE Running average of downlink packets in hundredth of packets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.22 | HundredthOfGauge64 | read-only | current |
| apPerfWlanCurrentDLPktsPerSec OBJECT-TYPE Downlink packets in hundredth of packets per second from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.23 | HundredthOfGauge64 | read-only | current |
| apPerfWlanDLPkts OBJECT-TYPE Running counter of downlink packets per second. | 1.3.6.1.4.1.4329.15.3.5.2.7.1.24 | Counter64 | read-only | current |
| apChannelUtilizationTable OBJECT-TYPE Table of AP utilization by channel that the AP can change dynamically. It contains one entry for each radio and channel of each active AP. | 1.3.6.1.4.1.4329.15.3.5.2.8 | not-accessible | current | |
| apChannelUtilizationEntry OBJECT-TYPE The AP performance statistics of one AP radio and channel. | 1.3.6.1.4.1.4329.15.3.5.2.8.1 | not-accessible | current | |
| channel OBJECT-TYPE Channel on which utilization is measured. | 1.3.6.1.4.1.4329.15.3.5.2.8.1.1 | Unsigned32 | not-accessible | current |
| apChnlUtilPrevPeakUtilization OBJECT-TYPE Peak channel utilization in % from last 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.8.1.2 | Gauge32 | read-only | current |
| apChnlUtilCurPeakUtilization OBJECT-TYPE Peak channel utilization in % of current 15 minute interval. | 1.3.6.1.4.1.4329.15.3.5.2.8.1.3 | Gauge32 | read-only | current |
| apChnlUtilAverageUtilization OBJECT-TYPE Running average of channel utilization in hundredth of %. | 1.3.6.1.4.1.4329.15.3.5.2.8.1.4 | HundredthOfGauge32 | read-only | current |
| apChnlUtilCurrentUtilization OBJECT-TYPE Channel utilization in % from latest statistics from AP. | 1.3.6.1.4.1.4329.15.3.5.2.8.1.5 | Gauge32 | read-only | current |
| apNeighboursTable OBJECT-TYPE A table showing the BSSID, RSS, operating radio channel and detailed information of a nearby AP. The table contains one row per nearby AP per radio per active AP. | 1.3.6.1.4.1.4329.15.3.5.2.9 | not-accessible | current | |
| apNeighboursEntry OBJECT-TYPE The configuration attributes of one nearby AP. | 1.3.6.1.4.1.4329.15.3.5.2.9.1 | not-accessible | current | |
| nearbyApIndex OBJECT-TYPE Nearby AP index. | 1.3.6.1.4.1.4329.15.3.5.2.9.1.1 | Unsigned32 | not-accessible | current |
| nearbyApInfo OBJECT-TYPE Detailed information of a nearby AP. | 1.3.6.1.4.1.4329.15.3.5.2.9.1.2 | DisplayString | read-only | current |
| nearbyApBSSID OBJECT-TYPE The BSSID of a nearby AP. | 1.3.6.1.4.1.4329.15.3.5.2.9.1.3 | OCTET STRING (SIZE(17)) | read-only | current |
| nearbyApChannel OBJECT-TYPE The operating radio channel of a nearby AP. | 1.3.6.1.4.1.4329.15.3.5.2.9.1.4 | DisplayString | read-only | current |
| nearbyApRSS OBJECT-TYPE The Received Signal Strength of a nearby AP. | 1.3.6.1.4.1.4329.15.3.5.2.9.1.5 | Integer32 | read-only | current |
| sensorManagement OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.3 | |||
| tftpSever OBJECT-TYPE TFTP server that sensor image resides. | 1.3.6.1.4.1.4329.15.3.5.3.1 | DisplayString | read-write | current |
| imagePath26xx OBJECT-TYPE Path of sensor image on TFTP server. | 1.3.6.1.4.1.4329.15.3.5.3.2 | DisplayString | read-write | current |
| imagePath36xx OBJECT-TYPE Path of sensor image on TFTP server. | 1.3.6.1.4.1.4329.15.3.5.3.3 | DisplayString | read-write | current |
| imageVersionOfap26xx OBJECT-TYPE Sensor's software version. | 1.3.6.1.4.1.4329.15.3.5.3.4 | DisplayString | read-write | current |
| imageVersionOfngap36xx OBJECT-TYPE Sensor's softerware version for Next Generation Access Point. | 1.3.6.1.4.1.4329.15.3.5.3.5 | DisplayString | read-write | current |
| apRegistration OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.4 | |||
| apRegSecurityMode OBJECT-TYPE Indicates registration mode for an AP. If allowAll(1), then all wireless APs are allowed to register to the controlloer, otherwise only approved APs in 'Approved AP' list are allowed to register to the controller. | 1.3.6.1.4.1.4329.15.3.5.4.1 | INTEGER {allowAll(1), allowApprovedOnes(2)} | read-write | current |
| apRegDiscoveryRetries OBJECT-TYPE Number of retries for discovery requests from an access point to controller. After these number of retries, the access point will start over again after some arbitrary delays. | 1.3.6.1.4.1.4329.15.3.5.4.2 | Unsigned32 (1..255) | read-write | current |
| apRegDiscoveryInterval OBJECT-TYPE Interval between two consecutive discovery requests from the same access point. | 1.3.6.1.4.1.4329.15.3.5.4.3 | Unsigned32 (1..10) | read-write | current |
| apRegTelnetPassword OBJECT-TYPE Password used to access an AP via telnet. This field is write-only and read access returns empty string. | 1.3.6.1.4.1.4329.15.3.5.4.4 | OCTET STRING | read-write | current |
| apRegSSHPassword OBJECT-TYPE SSH password used to access an access point. This field is write-only and read access returns empty string. | 1.3.6.1.4.1.4329.15.3.5.4.5 | OCTET STRING | read-write | current |
| apRegUseClusterEncryption OBJECT-TYPE If this field set to true, then all APs in the cluster use cluster encryption. | 1.3.6.1.4.1.4329.15.3.5.4.6 | TruthValue | read-write | current |
| apRegClusterSharedSecret OBJECT-TYPE Password for cluster encryption. This field is write-only and read access returns empty string. | 1.3.6.1.4.1.4329.15.3.5.4.7 | OCTET STRING | read-write | current |
| loadBalancing OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.5 | |||
| loadGroupTable OBJECT-TYPE Table of configured load groups for access points. A set of access points can be grouped together and they are identified by unique name. An access point can only be assigned to one group. | 1.3.6.1.4.1.4329.15.3.5.5.1 | not-accessible | current | |
| loadGroupEntry OBJECT-TYPE An entry containing definition of a load group. There exists two types of load group: client-balancing-group and radio-balancing-group. | 1.3.6.1.4.1.4329.15.3.5.5.1.1 | not-accessible | current | |
| loadGroupID OBJECT-TYPE Internally generated ID for a group and cannot be changed externally. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.1 | Unsigned32 | read-only | current |
| loadGroupName OBJECT-TYPE Unique name assigned to the group. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| loadGroupType OBJECT-TYPE Type of load balancing this group supports. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.3 | INTEGER {clientBalancing(0), radioBalancing(1)} | read-write | current |
| loadGroupBandPreference OBJECT-TYPE Band preference is enabled for this group if this field is set to true and group type is set to radioBalancing(1). | 1.3.6.1.4.1.4329.15.3.5.5.1.1.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| loadGroupLoadControl OBJECT-TYPE Load balancing is enabled for this group if this field is set to true and group type is set to radioBalancing(1). | 1.3.6.1.4.1.4329.15.3.5.5.1.1.5 | INTEGER {disabled(0), enabled(1)} | read-write | deprecated |
| loadGroupClientCountRadio1 OBJECT-TYPE Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.6 | Unsigned32 (5..60 | 121) | read-write | current |
| loadGroupClientCountRadio2 OBJECT-TYPE Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.7 | Unsigned32 (5..60 | 121) | read-write | current |
| loadGroupLoadControlEnableR1 OBJECT-TYPE If it is enabled then load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| loadGroupLoadControlEnableR2 OBJECT-TYPE If it is enabled then load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.9 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| loadGroupLoadControlStrictLimitR1 OBJECT-TYPE If it is enabled then strict limit for load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.10 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| loadGroupLoadControlStrictLimitR2 OBJECT-TYPE If it is enabled then strict limit for load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. | 1.3.6.1.4.1.4329.15.3.5.5.1.1.11 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| loadGrpRadiosTable OBJECT-TYPE Table of radio assignment to defined load groups. | 1.3.6.1.4.1.4329.15.3.5.5.2 | not-accessible | current | |
| loadGrpRadiosEntry OBJECT-TYPE Any entry defining radio assignment of AP, identified by apIndex, to a load group identified by loadGroupID. | 1.3.6.1.4.1.4329.15.3.5.5.2.1 | not-accessible | current | |
| loadGrpRadiosRadio1 OBJECT-TYPE If this field is set to 'assigned(1)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group. | 1.3.6.1.4.1.4329.15.3.5.5.2.1.2 | INTEGER {notApplicable(0), assigned(1), unassigned(2)} | read-write | current |
| loadGrpRadiosRadio2 OBJECT-TYPE If this field is set to 'assigned(2)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group. | 1.3.6.1.4.1.4329.15.3.5.5.2.1.3 | INTEGER {notApplicable(0), assigned(1), unassigned(2)} | read-write | current |
| loadGrpWlanTable OBJECT-TYPE Table of WLAN assignment to defined load groups. | 1.3.6.1.4.1.4329.15.3.5.5.3 | not-accessible | current | |
| loadGrpWlanEntry OBJECT-TYPE An entry defining WLAN, identified by wlanID, assignment to a load group identified by loadGroupID. | 1.3.6.1.4.1.4329.15.3.5.5.3.1 | not-accessible | current | |
| loadGrpWlanAssigned OBJECT-TYPE Assignement of WLAN, identified with wlanID, to the load balancing group identified bye loadGroupID. | 1.3.6.1.4.1.4329.15.3.5.5.3.1.1 | TruthValue | read-write | current |
| apMaintenanceCycle OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.5.6 | |||
| schedule OBJECT-TYPE AP maintenance schedule options. 0 : never perform the maintenance action. 1 : perform the maintenance action every day. 2 : perform the maintenance action every week. 3 : perform the maintenance action every month. | 1.3.6.1.4.1.4329.15.3.5.6.1 | INTEGER {never(0), daily(1), weekly(2), monthly(3)} | read-write | current |
| startHour OBJECT-TYPE Maintenance action starts at this hour of the day. | 1.3.6.1.4.1.4329.15.3.5.6.2 | Integer32 (0..23) | read-write | current |
| startMinute OBJECT-TYPE Maintenance action starts at this minute of the hour. | 1.3.6.1.4.1.4329.15.3.5.6.3 | Integer32 (0..59) | read-write | current |
| duration OBJECT-TYPE Duration of the AP maintenance cycle (how often maintenance is done) in hours. | 1.3.6.1.4.1.4329.15.3.5.6.4 | Integer32 (1..23) | read-write | current |
| recurrenceDaily OBJECT-TYPE This field has meaning only when the maintenance schedule option is set to daily(1). Below is the recurrence option. 0 : every day. 1 : every weekday. 2 : every weekend. | 1.3.6.1.4.1.4329.15.3.5.6.5 | INTEGER {everyDay(0), everyWeekday(1), everyWeekend(2)} | read-write | current |
| recurrenceWeekly OBJECT-TYPE This field has meaning only when the maintenance schedule option is set to weekly(2). Below are the recurrence options. BIT 0 : Sunday. BIT 1 : Monday. BIT 2 : Tuesday. BIT 3 : Wednesday. BIT 4 : Thursday. BIT 5 : Friday. BIT 6 : Saturday. | 1.3.6.1.4.1.4329.15.3.5.6.6 | Bits {sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)} | read-write | current |
| recurrenceMonthly OBJECT-TYPE This field has meaning only when the maintenance schedule option is set to monthly(3). Below are the recurrence options. BIT 0 : the first week of the month. BIT 1 : the second week of the month. BIT 2 : the third week of the month. BIT 3 : the fourth week of the month. BIT 4 : the fifth week of the month. BIT 5 : sunday of the week. BIT 6 : monday of the week. BIT 7 : tuesday of the week. BIT 8 : wednesday of the week. BIT 9 : thursday of the week. BIT 10 : friday of the week. BIT 11 : saturday of the week. | 1.3.6.1.4.1.4329.15.3.5.6.7 | Bits {first(0), second(1), third(2), fourth(3), fifth(4), sunday(5), monday(6), tuesday(7), wednesday(8), thursday(9), friday(10), saturday(11)} | read-write | current |
| apPlatforms OBJECT-TYPE Select which models of the AP platforms to perform the maintenance. BIT 0 : AP2600 platform. BIT 1 : AP2605 platform. BIT 2 : AP2650 platform. BIT 3 : AP4102 platform. BIT 4 : W786 platform. BIT 5 : AP3705 platform. BIT 6 : AP3710 platform. BIT 7 : AP3715 platform. BIT 8 : AP3765 platform. BIT 9 : AP3767 platform. BIT 10 : AP3801 platform. BIT 11 : AP3805 platform. BIT 12 : AP3825 platform. BIT 13 : AP3865 platform. BIT 14 : AP3935 platform. BIT 15 : AP3965 platform. BIT 16 : W78XC platform. BIT 17 : W78XCSFP platform. | 1.3.6.1.4.1.4329.15.3.5.6.8 | Bits {ap2600(0), ap2605(1), ap2650(2), ap4102(3), w786(4), ap3705(5), ap3710(6), ap3715(7), ap3765(8), ap3767(9), ap3801(10), ap3805(11), ap3825(12), ap3865(13), ap3935(14), ap3965(15), w78xc(16), w78xcsfp(17)} | read-write | current |
| mobileUnits OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.6 | |||
| mobileUnitCount OBJECT-TYPE Number of clients associated with the controller. | 1.3.6.1.4.1.4329.15.3.6.1 | Integer32 | read-write | current |
| muTable OBJECT-TYPE Table of information for clients associated with the EWC. | 1.3.6.1.4.1.4329.15.3.6.2 | not-accessible | current | |
| muEntry OBJECT-TYPE Information for a client associated with the EWC. | 1.3.6.1.4.1.4329.15.3.6.2.1 | not-accessible | current | |
| muMACAddress OBJECT-TYPE Client MAC address. | 1.3.6.1.4.1.4329.15.3.6.2.1.1 | MacAddress | read-only | current |
| muIPAddress OBJECT-TYPE Client IP Address. | 1.3.6.1.4.1.4329.15.3.6.2.1.2 | IpAddress | read-only | current |
| muUser OBJECT-TYPE Client login name. | 1.3.6.1.4.1.4329.15.3.6.2.1.3 | OCTET STRING | read-only | current |
| muState OBJECT-TYPE True if the client is authenticated. | 1.3.6.1.4.1.4329.15.3.6.2.1.4 | TruthValue | read-only | current |
| muAPSerialNo OBJECT-TYPE Serial Number of the Access Point the client is associated with. | 1.3.6.1.4.1.4329.15.3.6.2.1.5 | OCTET STRING | read-only | current |
| muVnsSSID OBJECT-TYPE SSID of the VNS the client is associated with. | 1.3.6.1.4.1.4329.15.3.6.2.1.6 | OCTET STRING | read-only | current |
| muTxPackets OBJECT-TYPE Number of packets trasmitted to the client. | 1.3.6.1.4.1.4329.15.3.6.2.1.7 | Counter64 | read-only | current |
| muRxPackets OBJECT-TYPE Number of packets received from the client. | 1.3.6.1.4.1.4329.15.3.6.2.1.8 | Counter64 | read-only | current |
| muTxOctets OBJECT-TYPE Number of octets transmitted to the client. | 1.3.6.1.4.1.4329.15.3.6.2.1.9 | Counter64 | read-only | current |
| muRxOctets OBJECT-TYPE Number of octets received from the client. | 1.3.6.1.4.1.4329.15.3.6.2.1.10 | Counter64 | read-only | current |
| muDuration OBJECT-TYPE Time client has been associated with the EWC. | 1.3.6.1.4.1.4329.15.3.6.2.1.11 | Counter64 | read-only | current |
| muAPName OBJECT-TYPE Name of the Access Point the client is associated with. | 1.3.6.1.4.1.4329.15.3.6.2.1.12 | DisplayString | read-only | current |
| muTopologyName OBJECT-TYPE Topology name that the MU is associated with. | 1.3.6.1.4.1.4329.15.3.6.2.1.13 | DisplayString | read-only | current |
| muPolicyName OBJECT-TYPE The name of the policy that provides filter for this MU. | 1.3.6.1.4.1.4329.15.3.6.2.1.14 | DisplayString | read-only | current |
| muDefaultCoS OBJECT-TYPE The CoS that is applied to the current traffic if the defined rule for the current traffic has not specifically defined any CoS. | 1.3.6.1.4.1.4329.15.3.6.2.1.15 | DisplayString | read-only | current |
| muConnectionProtocol OBJECT-TYPE The MU is using this connection protocol for current connection. Symbols notation: n50 = an = n5.0Ghz, n24 = bgn = n2.4Ghz | 1.3.6.1.4.1.4329.15.3.6.2.1.16 | INTEGER {unknown(0), a(1), g(2), b(3), n50(4), n24(5), ac(6)} | read-only | current |
| muConnectionCapability OBJECT-TYPE This field indicates what are the MU connection capability. | 1.3.6.1.4.1.4329.15.3.6.2.1.17 | INTEGER {unknown(0), a(1), bg(2), abg(3), an(4), bgn(5)} | read-only | deprecated |
| muWLANID OBJECT-TYPE ID of the WLAN that the MU is associated with. | 1.3.6.1.4.1.4329.15.3.6.2.1.18 | Unsigned32 | read-only | current |
| muBSSIDMac OBJECT-TYPE Client BSSID MAC address. | 1.3.6.1.4.1.4329.15.3.6.2.1.19 | MacAddress | read-only | current |
| muDot11ConnectionCapability OBJECT-TYPE This field indicates what are the MU connection capabilities. bit 0 : If this bit is set, the client is capable to tx/rx on A radio. bit 1 : If this bit is set, the client is capable to tx/rx on BG radio. bit 2 : If this bit is set, the client is capable of wpaV1 privacy. bit 3 : If this bit is set, the client is capable of wpaV2 privacy. bit 4 : If this bit is set, the client is capable to comunicate with 1 data stream. bit 5 : If this bit is set, the client is capable to comunicate with 2 data streams. bit 6 : If this bit is set, the client is capable to comunicate with 3 data streams. bit 7 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The voice client can synchronize the transmission and reception of voice frames with the AP. bit 8 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The video client can synchronize the transmission and reception of video frames with the AP. bit 9 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The client can synchronize the transmission and reception in background queue. bit 10 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The client can synchronize the transmission and reception in best effort queue. bit 11 : If this bit is set, the client is capable of Wi-Fi Multimedia(WMM) power save. bit 12 : If this bit is set, the client is capable of 802.11n Greenfield mode. bit 13 : If this bit is set, the client is on fast-transition mode. | 1.3.6.1.4.1.4329.15.3.6.2.1.20 | Bits {dot1150(0), dot1124(1), wpaV1(2), wpaV2(3), oneStream(4), twoStream(5), threeSteam(6), uapsdVoice(7), uapsdVideo(8), uapsdBackground(9), uapsdBesteffort(10), wmm(11), greenfield(12), fastTransition(13)} | read-write | current |
| muTSPECTable OBJECT-TYPE Table of information for Admission Control Statistics by active client. | 1.3.6.1.4.1.4329.15.3.6.3 | not-accessible | current | |
| muTSPECEntry OBJECT-TYPE Information for Admission Control Statistics by active client. | 1.3.6.1.4.1.4329.15.3.6.3.1 | not-accessible | current | |
| tspecMuMACAddress OBJECT-TYPE Client MAC address. | 1.3.6.1.4.1.4329.15.3.6.3.1.1 | MacAddress | read-only | current |
| tspecAC OBJECT-TYPE Access Category, such as Best Effort, Background, Voice, Video, and Reserved. | 1.3.6.1.4.1.4329.15.3.6.3.1.2 | INTEGER {be(0), bk(1), vi(2), vo(3), tvo(4), nwme(5)} | read-only | current |
| tspecDirection OBJECT-TYPE Traffic direction, such as uplink direction, downlink direction. | 1.3.6.1.4.1.4329.15.3.6.3.1.3 | INTEGER {uplink(0), dnlink(1), reserved(2), bidir(3)} | read-only | current |
| tspecApSerialNumber OBJECT-TYPE 16-character serial number of the AccessPoint. | 1.3.6.1.4.1.4329.15.3.6.3.1.4 | OCTET STRING | read-only | current |
| tspecMuIPAddress OBJECT-TYPE Client IP Address. | 1.3.6.1.4.1.4329.15.3.6.3.1.5 | IpAddress | read-only | current |
| tspecBssMac OBJECT-TYPE Access Point BSSID. | 1.3.6.1.4.1.4329.15.3.6.3.1.6 | MacAddress | read-only | current |
| tspecSsid OBJECT-TYPE VNS SSID. | 1.3.6.1.4.1.4329.15.3.6.3.1.7 | DisplayString | read-only | current |
| tspecMDR OBJECT-TYPE Mean Data Rate (bytes per second). | 1.3.6.1.4.1.4329.15.3.6.3.1.8 | Unsigned32 | read-only | current |
| tspecNMS OBJECT-TYPE Nominal MSDU size (bytes). | 1.3.6.1.4.1.4329.15.3.6.3.1.9 | Unsigned32 | read-only | current |
| tspecSBA OBJECT-TYPE Surplus Bandwidth Allowance. | 1.3.6.1.4.1.4329.15.3.6.3.1.10 | Unsigned32 | read-only | current |
| tspecDlRate OBJECT-TYPE Downlink Rate (bytes per second). | 1.3.6.1.4.1.4329.15.3.6.3.1.11 | DisplayString | read-only | current |
| tspecUlRate OBJECT-TYPE Uplink Rate (bytes per second). | 1.3.6.1.4.1.4329.15.3.6.3.1.12 | DisplayString | read-only | current |
| tspecDlViolations OBJECT-TYPE Downlink Violations (bytes per second). | 1.3.6.1.4.1.4329.15.3.6.3.1.13 | DisplayString | read-only | current |
| tspecUlViolations OBJECT-TYPE Uplink Violations (bytes per second). | 1.3.6.1.4.1.4329.15.3.6.3.1.14 | DisplayString | read-only | current |
| tspecProtocol OBJECT-TYPE 802.11 radio protocol. | 1.3.6.1.4.1.4329.15.3.6.3.1.15 | INTEGER {proto80211a(1), proto80211g(2), proto80211b(3), proto80211an(4), proto80211bgn(5)} | read-only | current |
| muACLType OBJECT-TYPE MUs can access EWC by sending association request and providing proper credentials. However, EWC allows creation of a master list of a blacklist or a whitelist group to control such access. There can exist only a blacklist or a whitelist (mutually exclusive) at any time. The list of MUs belonging to such a list is populated in muACLTable. The muACLTable content can be interpreted in conjunction with this field as follows: - blacklist(1): MUs listed in muACLTable cannot access EWC resources. - whitelist(2): Only MUs listed in muACLTable can access EWC resources. | 1.3.6.1.4.1.4329.15.3.6.4 | INTEGER {blacklist(1), whitelist(2)} | read-write | current |
| muACLTable OBJECT-TYPE Semantics of this list is directly related to muACLType. Access Control List(ACL) is list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials. | 1.3.6.1.4.1.4329.15.3.6.5 | not-accessible | current | |
| muACLEntry OBJECT-TYPE An entry about an MU and its ACL. | 1.3.6.1.4.1.4329.15.3.6.5.1 | not-accessible | current | |
| muACLMACAddress OBJECT-TYPE MAC address of MU. | 1.3.6.1.4.1.4329.15.3.6.5.1.1 | MacAddress | read-only | current |
| muACLRowStatus OBJECT-TYPE An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy. | 1.3.6.1.4.1.4329.15.3.6.5.1.2 | RowStatus | read-create | current |
| muAccessListTable OBJECT-TYPE Semantics of this list is directly related to muACLType. Access List Control(ACL) list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials. | 1.3.6.1.4.1.4329.15.3.6.6 | not-accessible | current | |
| muAccessListEntry OBJECT-TYPE An entry about about an MU and its ACL. | 1.3.6.1.4.1.4329.15.3.6.6.1 | not-accessible | current | |
| muAccessListMACAddress OBJECT-TYPE MAC address of MU. | 1.3.6.1.4.1.4329.15.3.6.6.1.1 | MacAddress | read-only | current |
| muAccessListBitmaskLength OBJECT-TYPE Length of bitmask associated to the MAC address in the entry. | 1.3.6.1.4.1.4329.15.3.6.6.1.2 | INTEGER {bits24(24), bits36(36), bits48(48)} | read-create | current |
| muAccessListRowStatus OBJECT-TYPE An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy. | 1.3.6.1.4.1.4329.15.3.6.6.1.3 | RowStatus | read-create | current |
| associations OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.7 | |||
| assocCount OBJECT-TYPE Total number of current client associations to the access point. | 1.3.6.1.4.1.4329.15.3.7.1 | Integer32 | read-write | current |
| assocTable OBJECT-TYPE Table of information about clients associated with the access point. | 1.3.6.1.4.1.4329.15.3.7.2 | not-accessible | current | |
| assocEntry OBJECT-TYPE Information for a single client in the association table. | 1.3.6.1.4.1.4329.15.3.7.2.1 | not-accessible | current | |
| assocMUMacAddress OBJECT-TYPE MAC address of the client. | 1.3.6.1.4.1.4329.15.3.7.2.1.1 | MacAddress | read-only | current |
| assocStartSysUpTime OBJECT-TYPE The system uptime that client became associated with the access point. | 1.3.6.1.4.1.4329.15.3.7.2.1.2 | TimeTicks | read-only | current |
| assocTxPackets OBJECT-TYPE Nubmer of tx packets to the client. | 1.3.6.1.4.1.4329.15.3.7.2.1.3 | Counter64 | read-only | current |
| assocRxPackets OBJECT-TYPE Number of received packets from the client. | 1.3.6.1.4.1.4329.15.3.7.2.1.4 | Counter64 | read-only | current |
| assocTxOctets OBJECT-TYPE Number of octets sent to the client. | 1.3.6.1.4.1.4329.15.3.7.2.1.5 | Counter64 | read-only | current |
| assocRxOctets OBJECT-TYPE Number of octets received from the client. | 1.3.6.1.4.1.4329.15.3.7.2.1.6 | Counter64 | read-only | current |
| assocDuration OBJECT-TYPE Length of time since last association. | 1.3.6.1.4.1.4329.15.3.7.2.1.7 | Integer32 | read-write | current |
| assocVnsIfIndex OBJECT-TYPE Index of VNS to which the MU is associated with. | 1.3.6.1.4.1.4329.15.3.7.2.1.8 | InterfaceIndex | read-only | current |
| protocols OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.8 | |||
| wassp OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.8.1 | |||
| logNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.9 | |||
| logEventSeverityThreshold OBJECT-TYPE Specifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for critical and major log events. Setting the threshold to minor will trap critical, major, and minor events. | 1.3.6.1.4.1.4329.15.3.9.1 | LogEventSeverity | read-write | current |
| logEventSeverity OBJECT-TYPE Contains the severity of the most recently trapped hiPathWirelessLogAlarm notification. | 1.3.6.1.4.1.4329.15.3.9.3 | LogEventSeverity | read-only | current |
| logEventComponent OBJECT-TYPE Contains the component which sent the most recently trapped hiPathWirelessLogAlarm notification. | 1.3.6.1.4.1.4329.15.3.9.4 | OCTET STRING | read-only | current |
| logEventDescription OBJECT-TYPE Contains the description of the most recently trapped hiPathWirelessLogAlarm. | 1.3.6.1.4.1.4329.15.3.9.5 | OCTET STRING | read-only | current |
| sites OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.10 | |||
| siteMaxEntries OBJECT-TYPE The maximum number of entries allowed in the siteTable. This value is platform dependent. | 1.3.6.1.4.1.4329.15.3.10.1 | Unsigned32 | read-only | current |
| siteNumEntries OBJECT-TYPE The current number of entries in the siteTable. | 1.3.6.1.4.1.4329.15.3.10.2 | Unsigned32 | read-only | current |
| siteTableNextAvailableIndex OBJECT-TYPE This object indicates the numerically lowest available index within this entity, which may be used for the value of siteID in the creation of a new entry in the siteTable. An index is considered available if the index value falls within the range of 1 to siteMaxEntries value and is not being used to index an existing entry in the siteTable contained within this entity. This value should only be considered a guideline for management creation of siteEntries, there is no requirement on management to create entries based upon this index value. | 1.3.6.1.4.1.4329.15.3.10.3 | Unsigned32 | read-only | current |
| siteTable OBJECT-TYPE A site is a logical entity that is constituted by collection of APs, CoS rules, policies, Radius server, WLAN, etc. A site is identified by a unique name. | 1.3.6.1.4.1.4329.15.3.10.4 | not-accessible | current | |
| siteEntry OBJECT-TYPE Definition of a site. | 1.3.6.1.4.1.4329.15.3.10.4.1 | not-accessible | current | |
| siteID OBJECT-TYPE An unique ID, identifying the site in the context of the controller. The site ID can be an integer value from 1 to the maximum number of APs supported by the EWC. | 1.3.6.1.4.1.4329.15.3.10.4.1.1 | Unsigned32 | read-only | current |
| siteRowStatus OBJECT-TYPE Row status for the entry. | 1.3.6.1.4.1.4329.15.3.10.4.1.2 | RowStatus | read-create | current |
| siteName OBJECT-TYPE Textual description to identify the site in the context of the controller. | 1.3.6.1.4.1.4329.15.3.10.4.1.3 | DisplayString (SIZE(1..64)) | read-create | current |
| siteLocalRadiusAuthentication OBJECT-TYPE If this value is set to true, then the RADIUS client is on APs, otherwise the RADIUS client is on controller. | 1.3.6.1.4.1.4329.15.3.10.4.1.4 | TruthValue | read-create | current |
| siteDefaultDNSServer OBJECT-TYPE If the APs associated to the site uses DHCP, and DHCP server does not assign DNS server, then this entry will be used for that purpose. Otherwise, if AP is configured with static IP address, then this entry will be used for that purpose. | 1.3.6.1.4.1.4329.15.3.10.4.1.5 | DisplayString (SIZE(0..64)) | read-create | current |
| siteEnableSecureTunnel OBJECT-TYPE If set to true secure communication key sent to APs to be used to encrypt the traffic between APs within the site and the traffic between controller and APs. However, the encryption itself does not take place unless siteEncryptCommAPtoController and/or siteEncryptCommBetweenAPs set to true. | 1.3.6.1.4.1.4329.15.3.10.4.1.6 | TruthValue | read-create | current |
| siteEncryptCommAPtoController OBJECT-TYPE If set to true, communication between APs within the site and the controller are encrypted using defined encyption. For details about encryption type, please refer to user manual. | 1.3.6.1.4.1.4329.15.3.10.4.1.7 | TruthValue | read-create | current |
| siteEncryptCommBetweenAPs OBJECT-TYPE If set to true, communication between APs within the site are encrypted using defined encyption. For details about encryption type, please refer to user manual. | 1.3.6.1.4.1.4329.15.3.10.4.1.8 | TruthValue | read-create | current |
| siteBandPreferenceEnable OBJECT-TYPE Enabling/disabling band preference for the site and associated APs. By enabling band preference 11a-capable clients can be moved to 11a radio and relieve the congestion on the 11g radio. Band preference provides radio load balancing between 11g and 11a radios. | 1.3.6.1.4.1.4329.15.3.10.4.1.9 | INTEGER {disable(0), enable(1)} | read-create | current |
| siteLoadControlEnableR1 OBJECT-TYPE Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #1 by disallowing additional clients on the radio above the configured radio limit. | 1.3.6.1.4.1.4329.15.3.10.4.1.10 | INTEGER {disable(0), enable(1)} | read-create | current |
| siteLoadControlEnableR2 OBJECT-TYPE Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #2 by disallowing additional clients on the radio above the configured radio limit. | 1.3.6.1.4.1.4329.15.3.10.4.1.11 | INTEGER {disable(0), enable(1)} | read-create | current |
| siteMaxClientR1 OBJECT-TYPE Maximum number of clients that are allowed to be associated to this radio (radio #1). If the Load Control is not enabled then the maximum for this radio uses default value. | 1.3.6.1.4.1.4329.15.3.10.4.1.12 | Unsigned32 (0..99) | read-create | current |
| siteMaxClientR2 OBJECT-TYPE Maximum number of clients that are allowed to be associated to this radio (radio #2). If the Load Control is not enabled then the maximum for this radio uses default value. | 1.3.6.1.4.1.4329.15.3.10.4.1.13 | Unsigned32 (0..99) | read-create | current |
| siteStrictLimitEnableR1 OBJECT-TYPE Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #1) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances. | 1.3.6.1.4.1.4329.15.3.10.4.1.14 | INTEGER {disable(0), enable(1)} | read-create | current |
| siteStrictLimitEnableR2 OBJECT-TYPE Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #2) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances. | 1.3.6.1.4.1.4329.15.3.10.4.1.15 | INTEGER {disable(0), enable(1)} | read-create | current |
| siteReplaceStnIDwithSiteName OBJECT-TYPE If this value is set to true, then the called station ID will be replaced with the site name. | 1.3.6.1.4.1.4329.15.3.10.4.1.16 | TruthValue | read-create | current |
| sitePolicyTable OBJECT-TYPE Each site can have zero or more policies assigned to it. All policies associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various policies to various sites. | 1.3.6.1.4.1.4329.15.3.10.5 | not-accessible | current | |
| sitePolicyEntry OBJECT-TYPE An entry defining assignment of a policy, identified by sitePolicyID, to a site, identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.5.1 | not-accessible | current | |
| sitePolicyID OBJECT-TYPE The policy index, as defined ENTERASYS-POLICY-PROFILE-MIB::etsysPolicyProfileIndex. | 1.3.6.1.4.1.4329.15.3.10.5.1.1 | Unsigned32 | not-accessible | current |
| sitePolicyMember OBJECT-TYPE Indicates whether the policy associated with this row is a member of the zone identified by zoneID. | 1.3.6.1.4.1.4329.15.3.10.5.1.2 | INTEGER {notMember(0), isMember(1)} | read-write | current |
| siteCosTable OBJECT-TYPE Each site can have zero or more CoS assigned to it. All CoS associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various CoS to various sites. | 1.3.6.1.4.1.4329.15.3.10.6 | not-accessible | current | |
| siteCosEntry OBJECT-TYPE An entry defining assignment of a CoS, identified by siteCoSID, to a site, identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.6.1 | not-accessible | current | |
| siteCoSID OBJECT-TYPE The CoS index, as defined in ENTERASYS-POLICY-PROFILE-MIB::etsysCosIndex. | 1.3.6.1.4.1.4329.15.3.10.6.1.1 | Unsigned32 | not-accessible | current |
| siteCoSMember OBJECT-TYPE Indicates whether the CoS associated with this row is a member of the site identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.6.1.2 | INTEGER {notMember(0), isMember(1)} | read-only | current |
| siteAPTable OBJECT-TYPE A site can have zero or more Access Points(AP) assigned to it. This table defines the assignment of various APs to various sites. | 1.3.6.1.4.1.4329.15.3.10.7 | not-accessible | current | |
| siteAPEntry OBJECT-TYPE An entry defining assignment of an AP, identified by apIndex, to a site, identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.7.1 | not-accessible | current | |
| siteAPMember OBJECT-TYPE Indicates whether the AP associated with this row is a member of the site identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.7.1.1 | INTEGER {notMember(0), isMember(1)} | read-write | current |
| siteWlanTable OBJECT-TYPE A site can have zero or more WLAN assigned to it. All WLANs that are associated with a site are pushed to the all APs belonging to the site. This table defines the assignment of various WLANs to various sites. | 1.3.6.1.4.1.4329.15.3.10.8 | not-accessible | current | |
| siteWlanEntry OBJECT-TYPE An entry defining assignment of a WLAN identified by siteWlanID, to a site, identified by siteID. | 1.3.6.1.4.1.4329.15.3.10.8.1 | not-accessible | current | |
| siteWlanApRadioIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.10.8.1.1 | INTEGER (1..2) | not-accessible | current |
| siteWlanApRadioAssigned OBJECT-TYPE Description. | 1.3.6.1.4.1.4329.15.3.10.8.1.2 | INTEGER {notAssigned(0), assigned(1)} | read-write | current |
| widsWips OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.11 | |||
| mitigatorAnalysisEngine OBJECT-TYPE Mitigator analysis engine can be enabled/disabled using this variable. All mitigator related objects, objects defined in widsWips subtree, can only be accessed using SNMPv3 provided this variable is set to enable(1) on behalf of users with privacy. | 1.3.6.1.4.1.4329.15.3.11.1 | INTEGER {disable(0), enable(1)} | read-write | current |
| scanGroupMaxEntries OBJECT-TYPE Maximum number of scan groups that can be created on the device. | 1.3.6.1.4.1.4329.15.3.11.2 | Unsigned32 | read-only | current |
| scanGroupsCurrentEntries OBJECT-TYPE Number of scan groups currently have been created on the device. | 1.3.6.1.4.1.4329.15.3.11.3 | Unsigned32 | read-only | current |
| activeThreatsCounts OBJECT-TYPE Number of currently active threats that have been detected. | 1.3.6.1.4.1.4329.15.3.11.4 | Unsigned32 | read-only | current |
| friendlyAPCounts OBJECT-TYPE Number of friendly access points that have been discovered at this point. | 1.3.6.1.4.1.4329.15.3.11.5 | Unsigned32 | read-only | current |
| uncategorizedAPCounts OBJECT-TYPE Number of uncategorized access points that have been discovered. This value refers to current number not the historical value. | 1.3.6.1.4.1.4329.15.3.11.6 | Unsigned32 | read-only | current |
| widsWipsEngineTable OBJECT-TYPE Table of Mitigators defined on set of controllers each identified by widsWipsEngineControllerIPAddress. | 1.3.6.1.4.1.4329.15.3.11.11 | not-accessible | current | |
| widsWipsEngineEntry OBJECT-TYPE One entry in this table identifying a mitigator engine in a defined controller identified by IP address, widsWipsEngineControllerIPAddress. | 1.3.6.1.4.1.4329.15.3.11.11.1 | not-accessible | current | |
| widsWipsEngineRowStatus OBJECT-TYPE RowStatus for creation/deletion of mitigator engine row. | 1.3.6.1.4.1.4329.15.3.11.11.1.1 | RowStatus | read-create | current |
| widsWipsEngineControllerIPAddress OBJECT-TYPE Ip address of the controller that the defined mitigator in this row will run on. | 1.3.6.1.4.1.4329.15.3.11.11.1.2 | IpAddress | read-create | current |
| widsWipsEnginePollInterval OBJECT-TYPE Poll interval in seconds between successive keep alive messages between this controller and the mitigator engine to monitor status of mitigator engine. | 1.3.6.1.4.1.4329.15.3.11.11.1.3 | INTEGER (3..60) | read-create | current |
| widsWipsEnginePollRetry OBJECT-TYPE Number of consecutive retries of failed contact to a mitigator agent before declaring mitigator engine dead. | 1.3.6.1.4.1.4329.15.3.11.11.1.4 | INTEGER (0..20) | read-create | current |
| inServiceScanGroupTable OBJECT-TYPE In service scan group enables the subsystem simultaneously scan for threats and performs wireless bridging based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions. | 1.3.6.1.4.1.4329.15.3.11.12 | not-accessible | current | |
| inServiceScanGroupEntry OBJECT-TYPE An entry in this table that defines attributes of a in-service scan group. | 1.3.6.1.4.1.4329.15.3.11.12.1 | not-accessible | current | |
| scanGroupProfileID OBJECT-TYPE A internally unique identifier for a scan group. Each scan group is indexed by this value. | 1.3.6.1.4.1.4329.15.3.11.12.1.1 | Unsigned32 | not-accessible | current |
| inSrvScanGrpName OBJECT-TYPE Textual description identifying the scan group. | 1.3.6.1.4.1.4329.15.3.11.12.1.2 | DisplayString (SIZE(1..255)) | read-create | current |
| inSrvScanGrpSecurityThreats OBJECT-TYPE Enable/disable security engine to scan for threats. | 1.3.6.1.4.1.4329.15.3.11.12.1.3 | INTEGER {disable(0), enable(1)} | read-create | current |
| inSrvScanGrpMaxConcurrentAttacksPerAP OBJECT-TYPE Max number of concurrent attacks per AP | 1.3.6.1.4.1.4329.15.3.11.12.1.4 | INTEGER (0..6) | read-create | current |
| inSrvScanGrpCounterMeasuresType OBJECT-TYPE bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP. | 1.3.6.1.4.1.4329.15.3.11.12.1.5 | Bits {externalHoneypotAPs(0), roamingToFriendlyAPs(1), internalHoneypotAPs(2), spoofedAPs(3), dropFloodAttack(4), removeDosAttack(5), adHocModeDevice(6), rogueAP(7)} | read-create | current |
| inSrvScanGrpScan2400MHzSelection OBJECT-TYPE bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel | 1.3.6.1.4.1.4329.15.3.11.12.1.6 | Bits {frequency2412MHz(0), frequency2417MHz(1), frequency2422MHz(2), frequency2427MHz(3), frequency2432MHz(4), frequency2437MHz(5), frequency2442MHz(6), frequency2447MHz(7), frequency2452MHz(8), frequency2457MHz(9), frequency2462MHz(10), frequency2467MHz(11), frequency2472MHz(12), frequency2484MHz(13)} | read-create | current |
| inSrvScanGrpScan5GHzSelection OBJECT-TYPE bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel | 1.3.6.1.4.1.4329.15.3.11.12.1.7 | Bits {frequency5040MHz(0), frequency5060MHz(1), frequency5080MHz(2), frequency5180MHz(3), frequency5200MHz(4), frequency5220MHz(5), frequency5240MHz(6), frequency5260MHz(7), frequency5280MHz(8), frequency5300MHz(9), frequency5320MHz(10), frequency5500MHz(11), frequency5520MHz(12), frequency5540MHz(13), frequency5560MHz(14), frequency5580MHz(15), frequency5600MHz(16), frequency5620MHz(17), frequency5640MHz(18), frequency5660MHz(19), frequency5680MHz(20), frequency5700MHz(21), frequency5745MHz(22), frequency5765MHz(23), frequency5785MHz(24), frequency5805MHz(25), frequency5825MHz(26), frequency4920MHz(27), frequency4940MHz(28), frequency4960MHz(29), frequency4980MHz(30)} | read-create | current |
| inSrvScanGrpblockAdHocClientsPeriod OBJECT-TYPE Number of seconds removing network access to the clients that are in ad hoc mode. | 1.3.6.1.4.1.4329.15.3.11.12.1.8 | Integer32 | read-create | current |
| inSrvScanGrpClassifySourceIF OBJECT-TYPE This variable allows to enable/disable classify sources of interference | 1.3.6.1.4.1.4329.15.3.11.12.1.9 | INTEGER {disable(0), enable(1)} | read-create | current |
| inSrvScanGrpRowStatus OBJECT-TYPE RowStatus field for creation/deletion or changing row status. | 1.3.6.1.4.1.4329.15.3.11.12.1.10 | RowStatus | read-create | current |
| inSrvScanGrpDetectRogueAP OBJECT-TYPE This enables/disables rogue AP detection. | 1.3.6.1.4.1.4329.15.3.11.12.1.11 | INTEGER {disable(0), enable(1)} | read-create | current |
| inSrvScanGrpListeningPort OBJECT-TYPE This OID represents the UDP port number that APs are to listen on while performing rogue AP detection. It has meaning only when inSrvScanGrpDetectRogueAP is enabled. | 1.3.6.1.4.1.4329.15.3.11.12.1.12 | Integer32 | read-write | current |
| outOfServiceScanGroupTable OBJECT-TYPE Out of service scan group is used to collect and classify various wireless identifiers that are discovered in the deployment environment. Legacy APs (26xx-based, 36xx-based) can participate in this subsystem if they are configured for out-of-service scanning. The new APs, based on 37xx architecture, can also participate in this subsystem. | 1.3.6.1.4.1.4329.15.3.11.13 | not-accessible | current | |
| outOfServiceScanGroupEntry OBJECT-TYPE An entry in this table that defines attributes of a out-of-service scan group. | 1.3.6.1.4.1.4329.15.3.11.13.1 | not-accessible | current | |
| outOfSrvScanGrpName OBJECT-TYPE Human readable textual description identifying scan group. | 1.3.6.1.4.1.4329.15.3.11.13.1.1 | DisplayString (SIZE(1..255)) | read-create | current |
| outOfSrvScanGrpRadio OBJECT-TYPE Radio selection for the scan group. Selected radio will be used in sacn group. | 1.3.6.1.4.1.4329.15.3.11.13.1.2 | INTEGER {radio1(1), radio2(2), both(3)} | read-create | current |
| outOfSrvScanGrpChannelList OBJECT-TYPE Identifying the channel(s) which will be used for the defined scan group. | 1.3.6.1.4.1.4329.15.3.11.13.1.3 | INTEGER {allChannel(0), currentChannel(999)} | read-create | current |
| outOfSrvScanGrpScanType OBJECT-TYPE This field allows to select the type of scanning, active/passive, this scan group will be executing. | 1.3.6.1.4.1.4329.15.3.11.13.1.4 | INTEGER {active(0), passive(1)} | read-create | current |
| outOfSrvScanGrpChannelDwellTime OBJECT-TYPE Dwell time in mili-second for performing scanning. | 1.3.6.1.4.1.4329.15.3.11.13.1.5 | INTEGER (200..500) | read-create | current |
| outOfSrvScanGrpScanTimeInterval OBJECT-TYPE Time interval between two sucssive scanning performed for this scan group. | 1.3.6.1.4.1.4329.15.3.11.13.1.6 | INTEGER (10..120) | read-create | current |
| outOfSrvScanGrpSecurityScan OBJECT-TYPE This field allows to enable/disable security Scan. | 1.3.6.1.4.1.4329.15.3.11.13.1.7 | INTEGER {disable(0), enable(1)} | read-create | current |
| outOfSrvScanGrpScanActivity OBJECT-TYPE Scaning can be started or stopped using this field. | 1.3.6.1.4.1.4329.15.3.11.13.1.8 | INTEGER {stop(0), start(1)} | read-create | current |
| outOfSrvScanGrpScanRowStatus OBJECT-TYPE RowStatus field for the entry. | 1.3.6.1.4.1.4329.15.3.11.13.1.9 | Integer32 | read-create | current |
| scanGroupAPAssignmentTable OBJECT-TYPE The list of APs that have been assigned to a particular scan group, which could include in-service and out-of-service scanning groups. | 1.3.6.1.4.1.4329.15.3.11.14 | not-accessible | current | |
| scanGroupAPAssignmentEntry OBJECT-TYPE An entry in this table defining an AP assignment to a group, identified by scanGroupProfileID. | 1.3.6.1.4.1.4329.15.3.11.14.1 | not-accessible | current | |
| scanGroupAPAssignApSerial OBJECT-TYPE Unique string of characters, a 16-character long, serial number of an access point. | 1.3.6.1.4.1.4329.15.3.11.14.1.1 | OCTET STRING (SIZE(16)) | read-only | current |
| scanGroupAPAssignGroupName OBJECT-TYPE Human readable textual description identifying scan group. | 1.3.6.1.4.1.4329.15.3.11.14.1.2 | DisplayString (SIZE(1..255)) | read-only | current |
| scanGroupAPAssignName OBJECT-TYPE Access Point (AP) name associated to this scan group. | 1.3.6.1.4.1.4329.15.3.11.14.1.3 | DisplayString (SIZE(1..255)) | read-only | current |
| scanGroupAPAssignRadio1 OBJECT-TYPE This field allows the radio #1 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile | 1.3.6.1.4.1.4329.15.3.11.14.1.4 | INTEGER {off(0), b(1), g(2), bg(3), a(4), j(8), n(16), gn(18), bgn(19), an(20), nStrict(32), gnStrict(34), bgnStrict(35), anStrict(36)} | read-write | current |
| scanGroupAPAssignRadio2 OBJECT-TYPE This field allows the radio #2 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile | 1.3.6.1.4.1.4329.15.3.11.14.1.5 | INTEGER {off(0), b(1), g(2), bg(3), a(4), j(8), n(16), gn(18), bgn(19), an(20), nStrict(32), gnStrict(34), bgnStrict(35), anStrict(36)} | read-write | current |
| scanGroupAPAssignInactiveAP OBJECT-TYPE This field allows to set the AP as active/inactive in scanning activities. | 1.3.6.1.4.1.4329.15.3.11.14.1.6 | INTEGER {inactive(0), active(1)} | read-write | current |
| scanGroupAPAssignAllowScanning OBJECT-TYPE Setting scanning to active/inactive using this AP. | 1.3.6.1.4.1.4329.15.3.11.14.1.7 | INTEGER {notAllow(0), allow(1)} | read-write | current |
| scanGroupAPAssignAllowSpectrumAnalysis OBJECT-TYPE Setting spectrum analysis to active/inactive using this AP. | 1.3.6.1.4.1.4329.15.3.11.14.1.8 | INTEGER {notAllow(0), allow(1)} | read-write | current |
| scanGroupAPAssignControllerIPAddress OBJECT-TYPE The IP address of the controller to which the AP is connected currently. | 1.3.6.1.4.1.4329.15.3.11.14.1.9 | IpAddress | read-write | current |
| scanGroupAPAssignFordwardingService OBJECT-TYPE This OID lists the types of forwarding services that each Guardian is assigned to. A Guardian will revert to providing these services when it is removed from the Guardian role. The meanings of the individual flags are: bit 0: Set if this AP is a member of a site. bit 1: Set if this AP is assigned to a load group. bit 2: Set if this AP is assigned to at least one WLAN service. This OID is only relevant to APs in the Guardian role. | 1.3.6.1.4.1.4329.15.3.11.14.1.10 | Bits {assignedToSite(0), assignedToLoadGroup(1), assignedToWlanService(2)} | read-only | current |
| scanAPTable OBJECT-TYPE Table of sacn APs on each collector. This table can be viewed only in v3 mode when the mitigator analys engine is enabled. | 1.3.6.1.4.1.4329.15.3.11.15 | not-accessible | current | |
| scanAPEntry OBJECT-TYPE An entry in this table identifying one access point. | 1.3.6.1.4.1.4329.15.3.11.15.1 | not-accessible | current | |
| scanAPControllerIPAddress OBJECT-TYPE IP address of the controller on which the scanning executed. | 1.3.6.1.4.1.4329.15.3.11.15.1.1 | IpAddress | read-only | current |
| scanAPSerialNumber OBJECT-TYPE Serial number of the access point, 16-character human readable text, that is assigned to this group. | 1.3.6.1.4.1.4329.15.3.11.15.1.2 | OCTET STRING (SIZE(16)) | read-only | current |
| scanAPAcessPointName OBJECT-TYPE Name of the access point belonging to this group. | 1.3.6.1.4.1.4329.15.3.11.15.1.3 | DisplayString (SIZE(1..255)) | read-create | current |
| scanAPRowStatus OBJECT-TYPE Row status for the entry. | 1.3.6.1.4.1.4329.15.3.11.15.1.4 | RowStatus | read-create | current |
| scanAPProfileName OBJECT-TYPE Name of the scan profile to which this access point is assigned. | 1.3.6.1.4.1.4329.15.3.11.15.1.5 | DisplayString (SIZE(1..255)) | read-create | current |
| scanAPProfileType OBJECT-TYPE inServiceScan(1): access point is performed In service Scan. guardianScan(2): access point is performed Guardian Scan. outOfServiceScan(3): access point is performed out of service Scan(Legacy Scan). | 1.3.6.1.4.1.4329.15.3.11.15.1.6 | INTEGER {inServiceScan(1), guardianScan(2), outOfServiceScan(3)} | read-create | current |
| friendlyAPTable OBJECT-TYPE List of Access Points that have been categorized as not being any threat to the wireless network that is managed by EWC. This table can be viewed only in v3 mode when the mitigator analys engine is enabled. | 1.3.6.1.4.1.4329.15.3.11.16 | not-accessible | current | |
| friendlyAPEntry OBJECT-TYPE An entry in this table identifying an access points and some of its attributes. | 1.3.6.1.4.1.4329.15.3.11.16.1 | not-accessible | current | |
| friendlyAPMacAddress OBJECT-TYPE Ethernet MAC address of the access point. | 1.3.6.1.4.1.4329.15.3.11.16.1.1 | MacAddress | read-write | current |
| friendlyAPSSID OBJECT-TYPE SSID broadcasted by the access point. | 1.3.6.1.4.1.4329.15.3.11.16.1.2 | DisplayString (SIZE(1..32)) | read-write | current |
| friendlyAPDescription OBJECT-TYPE Textual description that is used to identify the access point. | 1.3.6.1.4.1.4329.15.3.11.16.1.3 | DisplayString (SIZE(1..255)) | read-write | current |
| friendlyAPManufacturer OBJECT-TYPE Textual description identifying the access point manufacturer. | 1.3.6.1.4.1.4329.15.3.11.16.1.4 | DisplayString (SIZE(1..255)) | read-only | current |
| uncategorizedAPTable OBJECT-TYPE List of APs that have not been categorized either as friendly, threat or authorized. | 1.3.6.1.4.1.4329.15.3.11.17 | not-accessible | current | |
| uncategorizedAPEntry OBJECT-TYPE An entry about an AP in this table. | 1.3.6.1.4.1.4329.15.3.11.17.1 | not-accessible | current | |
| uncategorizedAPMAC OBJECT-TYPE MAC address of access point. | 1.3.6.1.4.1.4329.15.3.11.17.1.1 | MacAddress | not-accessible | current |
| uncategorizedAPDescption OBJECT-TYPE Textual description of access point. | 1.3.6.1.4.1.4329.15.3.11.17.1.2 | DisplayString | read-only | current |
| uncategorizedAPManufacturer OBJECT-TYPE Access point manufacturer. | 1.3.6.1.4.1.4329.15.3.11.17.1.3 | DisplayString | read-only | current |
| uncategorizedAPClassify OBJECT-TYPE By setting this field, access point can be reclassified and moved to different group. | 1.3.6.1.4.1.4329.15.3.11.17.1.4 | INTEGER {noAction(0), clasifyAsAuthorized(1), classifyAsFriendlyAP(2), clasifyAsThreatForReport(3), clasifyAsInternalHoneypotThreat(4), clasifyAsExternalHoneypotThreat(5)} | read-write | current |
| uncategorizedAPSSID OBJECT-TYPE SSID broadcasted by the access point. | 1.3.6.1.4.1.4329.15.3.11.17.1.5 | DisplayString (SIZE(1..32)) | read-only | current |
| authorizedAPTable OBJECT-TYPE List of authorized access point. | 1.3.6.1.4.1.4329.15.3.11.18 | not-accessible | current | |
| authorizedAPEntry OBJECT-TYPE An entry in this table describing an authorized AP. | 1.3.6.1.4.1.4329.15.3.11.18.1 | not-accessible | current | |
| authorizedAPMAC OBJECT-TYPE MAC address of access point. | 1.3.6.1.4.1.4329.15.3.11.18.1.1 | MacAddress | not-accessible | current |
| authorizedAPDescription OBJECT-TYPE Discription of the access point. | 1.3.6.1.4.1.4329.15.3.11.18.1.2 | DisplayString | read-create | current |
| authorizedAPManufacturer OBJECT-TYPE Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed. | 1.3.6.1.4.1.4329.15.3.11.18.1.3 | DisplayString | read-create | current |
| authorizedAPClassify OBJECT-TYPE By setting this field, access point can be reclassified and moved to different group. | 1.3.6.1.4.1.4329.15.3.11.18.1.4 | INTEGER {noAction(0), classifyAsFriendlyAP(1)} | read-create | current |
| authorizedAPRowStatus OBJECT-TYPE Action permitted are 'delete/add' row. | 1.3.6.1.4.1.4329.15.3.11.18.1.5 | RowStatus | read-create | current |
| prohibitedAPTable OBJECT-TYPE List of prohibited access points. | 1.3.6.1.4.1.4329.15.3.11.19 | not-accessible | current | |
| prohibitedAPEntry OBJECT-TYPE An entry in this table describing an access point. | 1.3.6.1.4.1.4329.15.3.11.19.1 | not-accessible | current | |
| prohibitedAPMAC OBJECT-TYPE MAC address of access point. | 1.3.6.1.4.1.4329.15.3.11.19.1.1 | MacAddress | not-accessible | current |
| prohibitedAPCategory OBJECT-TYPE The category the access point in this row belongs to. | 1.3.6.1.4.1.4329.15.3.11.19.1.2 | INTEGER {notAvailable(0), reportPresenceOnly(65529), externalHoneyPot(65530), internalHoneyPot(65531), friendly(65532), perauthorized(65533), authorized(65534)} | read-create | current |
| prohibitedAPDescription OBJECT-TYPE Description of the access point. | 1.3.6.1.4.1.4329.15.3.11.19.1.3 | DisplayString | read-create | current |
| prohibitedAPManufacturer OBJECT-TYPE Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed. | 1.3.6.1.4.1.4329.15.3.11.19.1.4 | DisplayString | read-create | current |
| prohibitedAPClassify OBJECT-TYPE By setting this field, access point can be reclassified and moved to different group. | 1.3.6.1.4.1.4329.15.3.11.19.1.5 | INTEGER {classifyAsFriendlyAP(1), noAction(2)} | read-create | current |
| prohibitedAPRowStatus OBJECT-TYPE Action permitted are 'delete/add' row. | 1.3.6.1.4.1.4329.15.3.11.19.1.6 | RowStatus | read-create | current |
| dedicatedScanGroupTable OBJECT-TYPE dedicated scan group enables the subsystem full time scan for threats based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions. | 1.3.6.1.4.1.4329.15.3.11.20 | not-accessible | current | |
| dedicatedScanGroupEntry OBJECT-TYPE An entry in this table that defines attributes of a dedicated scan group. | 1.3.6.1.4.1.4329.15.3.11.20.1 | not-accessible | current | |
| dedicatedScanGrpName OBJECT-TYPE Textual description identifying the scan group. | 1.3.6.1.4.1.4329.15.3.11.20.1.1 | DisplayString (SIZE(1..255)) | read-create | current |
| dedicatedScanGrpSecurityThreats OBJECT-TYPE Enable/disable security engine to scan for threats. | 1.3.6.1.4.1.4329.15.3.11.20.1.2 | INTEGER {disable(0), enable(1)} | read-create | current |
| dedicatedScanGrpMaxConcurrentAttacksPerAP OBJECT-TYPE Max number of concurrent attacks per AP | 1.3.6.1.4.1.4329.15.3.11.20.1.3 | Integer32 (0..6) | read-create | current |
| dedicatedScanGrpCounterMeasures OBJECT-TYPE bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP. | 1.3.6.1.4.1.4329.15.3.11.20.1.4 | Bits {externalHoneypotAPs(0), roamingToFriendlyAPs(1), internalHoneypotAPs(2), spoofedAPs(3), dropFloodAttack(4), removeDosAttack(5), adHocModeDevice(6), rogueAP(7)} | read-create | current |
| dedicatedScanGrpScan2400MHzFreq OBJECT-TYPE bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel | 1.3.6.1.4.1.4329.15.3.11.20.1.5 | Bits {frequency2412MHz(0), frequency2417MHz(1), frequency2422MHz(2), frequency2427MHz(3), frequency2432MHz(4), frequency2437MHz(5), frequency2442MHz(6), frequency2447MHz(7), frequency2452MHz(8), frequency2457MHz(9), frequency2462MHz(10), frequency2467MHz(11), frequency2472MHz(12), frequency2484MHz(13)} | read-create | current |
| dedicatedScanGrpScan5GHzFreq OBJECT-TYPE bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel | 1.3.6.1.4.1.4329.15.3.11.20.1.6 | Bits {frequency5040MHz(0), frequency5060MHz(1), frequency5080MHz(2), frequency5180MHz(3), frequency5200MHz(4), frequency5220MHz(5), frequency5240MHz(6), frequency5260MHz(7), frequency5280MHz(8), frequency5300MHz(9), frequency5320MHz(10), frequency5500MHz(11), frequency5520MHz(12), frequency5540MHz(13), frequency5560MHz(14), frequency5580MHz(15), frequency5600MHz(16), frequency5620MHz(17), frequency5640MHz(18), frequency5660MHz(19), frequency5680MHz(20), frequency5700MHz(21), frequency5745MHz(22), frequency5765MHz(23), frequency5785MHz(24), frequency5805MHz(25), frequency5825MHz(26), frequency4920MHz(27), frequency4940MHz(28), frequency4960MHz(29), frequency4980MHz(30)} | read-create | current |
| dedicatedScanGrpBlockAdHocPeriod OBJECT-TYPE Number of seconds removing network access to the clients that are in ad hoc mode. | 1.3.6.1.4.1.4329.15.3.11.20.1.7 | Integer32 | read-create | current |
| dedicatedScanGrpClassifySourceIF OBJECT-TYPE This variable allows to enable/disable classify sources of interference | 1.3.6.1.4.1.4329.15.3.11.20.1.8 | INTEGER {disable(0), enable(1)} | read-create | current |
| dedicatedScanGrpRowStatus OBJECT-TYPE RowStatus field for creation/deletion or changing row status. | 1.3.6.1.4.1.4329.15.3.11.20.1.9 | RowStatus | read-create | current |
| dedicatedScanGrpDetectRogueAP OBJECT-TYPE This enables/disables rogue AP detection. | 1.3.6.1.4.1.4329.15.3.11.20.1.10 | INTEGER {disable(0), enable(1)} | read-create | current |
| dedicatedScanGrpListeningPort OBJECT-TYPE This variable has meaning only when dedicatedScanGrpDetectRogueAP is enabled. The port number is the port for listening for rogue AP detection. | 1.3.6.1.4.1.4329.15.3.11.20.1.11 | Integer32 | read-create | current |
| widsWipsReport OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.11.30 | |||
| activeThreatTable OBJECT-TYPE List of active threats that have been discovered to this point of time. | 1.3.6.1.4.1.4329.15.3.11.30.1 | not-accessible | current | |
| activeThreatEntry OBJECT-TYPE An entry in this table describing an idividual threat charactersitics and attributes. | 1.3.6.1.4.1.4329.15.3.11.30.1.1 | not-accessible | current | |
| activeThreatIndex OBJECT-TYPE Internally generated number without any significat meaning except used as indexing in this table. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.1 | Unsigned32 | not-accessible | current |
| activeThreatCategory OBJECT-TYPE Textual description describing the type of the threat. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.2 | DisplayString | read-only | current |
| activeThreatDeviceMAC OBJECT-TYPE MAC address of the device that the threat appears to be originated. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.3 | MacAddress | read-only | current |
| activeThreatDateTime OBJECT-TYPE Date and time the threat was discovered. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.4 | DisplayString | read-only | current |
| activeThreatCounterMeasure OBJECT-TYPE Counter measure has been taken to tackle the threat. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.5 | INTEGER {noCounterMeasure(0), rateLimit(1), preventUse(2), preventRoaming(4), blacklisted(8)} | read-only | current |
| activeThreatAPName OBJECT-TYPE Name of the access point. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.6 | DisplayString | read-only | current |
| activeThreatRSS OBJECT-TYPE Signal strength of the device considered to be a threat. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.7 | DisplayString | read-only | current |
| activeThreatExtraDetails OBJECT-TYPE Extra comments related to the threat. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.8 | DisplayString | read-only | current |
| activeThreatThreat OBJECT-TYPE Textual description of the threat. | 1.3.6.1.4.1.4329.15.3.11.30.1.1.9 | DisplayString | read-only | current |
| countermeasureAPTable OBJECT-TYPE List of APs engaged in countermeasure activities to thwart coming threats. | 1.3.6.1.4.1.4329.15.3.11.30.2 | not-accessible | current | |
| countermeasureAPEntry OBJECT-TYPE An entry in this table identifying an AP engaged in countermeasure activities. | 1.3.6.1.4.1.4329.15.3.11.30.2.1 | not-accessible | current | |
| countermeasureAPThreatIndex OBJECT-TYPE Internally generated index of the access point taking part in countermeasure. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.1 | Unsigned32 | not-accessible | current |
| countermeasureAPSerial OBJECT-TYPE Serial number of the access point taking part in countermeasure. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.2 | DisplayString | read-only | current |
| countermeasureAPName OBJECT-TYPE Name of the access point taking part in countermeasure. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.3 | DisplayString | read-only | current |
| countermeasureAPThreatCategory OBJECT-TYPE Textual description of the threat category that countermeasure action is aimed at. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.4 | DisplayString | read-only | current |
| countermeasureAPCountermeasure OBJECT-TYPE Countermeasure has been taken to thwart the threat. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.5 | DisplayString | read-only | current |
| countermeasureAPTime OBJECT-TYPE The time that the countermeasure has started. | 1.3.6.1.4.1.4329.15.3.11.30.2.1.6 | DisplayString | read-only | current |
| blacklistedClientTable OBJECT-TYPE List of clients that have been blacklisted due to preceived threats they may pose to the safe functioning of the operating network. | 1.3.6.1.4.1.4329.15.3.11.30.3 | not-accessible | current | |
| blacklistedClientEntry OBJECT-TYPE An entry in this table pertaining information about the MU that has been blacklisted. | 1.3.6.1.4.1.4329.15.3.11.30.3.1 | not-accessible | current | |
| blacklistedClientMAC OBJECT-TYPE MAC address of the client. | 1.3.6.1.4.1.4329.15.3.11.30.3.1.1 | MacAddress | read-only | current |
| blacklistedClientStatTime OBJECT-TYPE The time blacklisting started. | 1.3.6.1.4.1.4329.15.3.11.30.3.1.2 | DisplayString | read-only | current |
| blacklistedClientEndTime OBJECT-TYPE The time blacklisting ends. | 1.3.6.1.4.1.4329.15.3.11.30.3.1.3 | DisplayString | read-only | current |
| blacklistedClientReason OBJECT-TYPE Reason for blacklisting the client. | 1.3.6.1.4.1.4329.15.3.11.30.3.1.4 | DisplayString | read-only | current |
| threatSummaryTable OBJECT-TYPE Summary of all threats that have been detected in the network by wireless controller system. | 1.3.6.1.4.1.4329.15.3.11.30.4 | not-accessible | current | |
| threatSummaryEntry OBJECT-TYPE An entry summarizing statistics about a category of a threat. | 1.3.6.1.4.1.4329.15.3.11.30.4.1 | not-accessible | current | |
| threatSummaryIndex OBJECT-TYPE Internally generated index. | 1.3.6.1.4.1.4329.15.3.11.30.4.1.1 | Unsigned32 | not-accessible | current |
| threatSummaryCategory OBJECT-TYPE Textul description identifying the category of a threat. | 1.3.6.1.4.1.4329.15.3.11.30.4.1.2 | DisplayString | read-only | current |
| threatSummaryActiveThreat OBJECT-TYPE Counts of threats that are currently active. | 1.3.6.1.4.1.4329.15.3.11.30.4.1.3 | Unsigned32 | read-only | current |
| threatSummaryHistoricalCounts OBJECT-TYPE Historical counts of such threat that were detected in the past by the wireless controller system. | 1.3.6.1.4.1.4329.15.3.11.30.4.1.4 | Unsigned32 | read-only | current |
| apNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.19 | |||
| apEventId OBJECT-TYPE Identifies event associated with AP or AP tunnel: apPollTimeout - an event triggered when the AP disconnects from the controller. apRegister - an event triggered when the AP connects to the controller. | 1.3.6.1.4.1.4329.15.3.19.1 | INTEGER {apPollTimeout(1), apRegister(2)} | read-write | current |
| apEventDescription OBJECT-TYPE Contains the description of the most recently triggered event. | 1.3.6.1.4.1.4329.15.3.19.2 | OCTET STRING | read-only | current |
| apEventAPSerialNumber OBJECT-TYPE 16-character serial number of the AP. | 1.3.6.1.4.1.4329.15.3.19.3 | OCTET STRING (SIZE(16)) | read-only | current |
| stationSessionNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.20 | |||
| stationEventType OBJECT-TYPE station event type include: registration(0): MU registration. deRegistration(1): MU de-registration. stateChange(2): MU state changed. registrationFailed(3): MU registration failure. roam(4): MU roam. mbaTimeout(5): MU MAC-Based-Authentication time out. mbaAccepted(6): MU MAC-Based-Authentication accepted. mbaRejected(7): MU MAC-Based-Authentication rejected. authorizationChanged(8): MU authorization changed. authentication(9): MU authentication. authenticationFailed(10): MU authentication failure. locationUpdate(11): MU location updated. areaChange(12): MU roamed to other area. | 1.3.6.1.4.1.4329.15.3.20.1 | INTEGER {registration(0), deRegistration(1), stateChange(2), registrationFailed(3), roam(4), mbaTimeout(5), mbaAccepted(6), mbaRejected(7), authorizationChanged(8), authentication(9), authenticationFailed(10), locationUpdate(11), areaChange(12)} | read-only | current |
| stationMacAddress OBJECT-TYPE MAC address of the station that is the subject of this event report. | 1.3.6.1.4.1.4329.15.3.20.2 | MacAddress | read-only | current |
| stationIPAddress OBJECT-TYPE IP address of the station that is the subject of this event report. | 1.3.6.1.4.1.4329.15.3.20.3 | IpAddress | read-only | current |
| stationAPName OBJECT-TYPE name of the AP which station associated with | 1.3.6.1.4.1.4329.15.3.20.4 | DisplayString | read-only | current |
| stationAPSSID OBJECT-TYPE SSID broadcasted by the access point which station connected to | 1.3.6.1.4.1.4329.15.3.20.5 | DisplayString | read-only | current |
| stationDetailEvent OBJECT-TYPE detail description of the station event | 1.3.6.1.4.1.4329.15.3.20.6 | DisplayString | read-only | current |
| stationRoamedAPName OBJECT-TYPE name of the access point which station roamed from | 1.3.6.1.4.1.4329.15.3.20.7 | DisplayString | read-only | current |
| stationName OBJECT-TYPE name of station | 1.3.6.1.4.1.4329.15.3.20.8 | DisplayString | read-only | current |
| stationBSSID OBJECT-TYPE the Mac address of the radio which station connect to | 1.3.6.1.4.1.4329.15.3.20.9 | DisplayString | read-only | current |
| stationEventTimeStamp OBJECT-TYPE The duration in hundredths of a second from the network agent start time to the time of generation of the station event. | 1.3.6.1.4.1.4329.15.3.20.10 | TimeTicks | read-only | current |
| stationIPv6Address1 OBJECT-TYPE One of the IPv6 addresses of the station that is the subject of this event report. | 1.3.6.1.4.1.4329.15.3.20.12 | Ipv6Address | read-only | current |
| stationIPv6Address2 OBJECT-TYPE One of the IPv6 addresses of the station that is the subject of this event report. | 1.3.6.1.4.1.4329.15.3.20.13 | Ipv6Address | read-only | current |
| stationIPv6Address3 OBJECT-TYPE One of the IPv6 addresses of the station that is the subject of this event report. | 1.3.6.1.4.1.4329.15.3.20.14 | Ipv6Address | read-only | current |
| hiPathWirelessHWCConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.30 | |||
| wirelessEWCGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4329.15.3.30.5 |
Notifications
| Name | OID | Status |
|---|---|---|
| hiPathWirelessLogAlarm NOTIFICATION-TYPE Components of an alarm. | 1.3.6.1.4.1.4329.15.3.9.6 | current |
| apTunnelAlarm NOTIFICATION-TYPE alarm associated with AP and AP interface. | 1.3.6.1.4.1.4329.15.3.19.4 | current |
| stationEventAlarm NOTIFICATION-TYPE A trap describing a significant event that happened to a station during a session on the network. A controller can sees hundreds or even thousands of these events every second. | 1.3.6.1.4.1.4329.15.3.20.11 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| hiPathWirelessHWCModule MODULE-COMPLIANCE Conformance definition for the EWC MIB. | 1.3.6.1.4.1.4329.15.3.30.1 | current |
| hiPathWirelessHWCGroup OBJECT-GROUP Conformance groups. | 1.3.6.1.4.1.4329.15.3.30.2 | current |
| hiPathWirelessHWCAlarms NOTIFICATION-GROUP Conformance information for the alarm groups. | 1.3.6.1.4.1.4329.15.3.30.3 | current |
| hiPathWirelessHWCObsolete OBJECT-GROUP List of object that EWC does not anymore support. | 1.3.6.1.4.1.4329.15.3.30.4 | obsolete |
| physicalPortsGroup OBJECT-GROUP Physical ports and their attributes. | 1.3.6.1.4.1.4329.15.3.30.5.1 | deprecated |
| phyDHCPRangeGroup OBJECT-GROUP DHCP objects and attributes associated to physical ports. | 1.3.6.1.4.1.4329.15.3.30.5.2 | deprecated |
| layerTwoPortGroup OBJECT-GROUP Collection of layer two ports objects. | 1.3.6.1.4.1.4329.15.3.30.5.3 | current |
| muGroup OBJECT-GROUP MU attributes associated to EWC. | 1.3.6.1.4.1.4329.15.3.30.5.4 | current |
| apStatsGroup OBJECT-GROUP Collection of objects and attributes related to AP statistics. | 1.3.6.1.4.1.4329.15.3.30.5.5 | current |
| muACLGroup OBJECT-GROUP List of objects for creation of blacklist/whitelist. | 1.3.6.1.4.1.4329.15.3.30.5.6 | current |
| siteGroup OBJECT-GROUP A collection of objects providing Site creation and its attributes. | 1.3.6.1.4.1.4329.15.3.30.5.7 | current |
| sitePolicyGroup OBJECT-GROUP Objects defining the association of policies to sites. | 1.3.6.1.4.1.4329.15.3.30.5.8 | current |
| siteCosGroup OBJECT-GROUP Objects defining the association of policies to sites. | 1.3.6.1.4.1.4329.15.3.30.5.9 | current |
| siteAPGroup OBJECT-GROUP Objects defining the association of policies to sites. | 1.3.6.1.4.1.4329.15.3.30.5.10 | current |
| siteWlanGroup OBJECT-GROUP Objects defining the association of policies to sites. | 1.3.6.1.4.1.4329.15.3.30.5.11 | current |
| apGroup OBJECT-GROUP List of objects defining configuration attributes of an AP. | 1.3.6.1.4.1.4329.15.3.30.5.12 | current |
| wlanGroup OBJECT-GROUP List of objects defining configuration attributes of a WLAN. | 1.3.6.1.4.1.4329.15.3.30.5.13 | current |
| wlanStatsGroup OBJECT-GROUP List of objects defining configuration attributes of a WLAN. | 1.3.6.1.4.1.4329.15.3.30.5.14 | current |
| topologyGroup OBJECT-GROUP List of objects defining configuration attributes of a WLAN. | 1.3.6.1.4.1.4329.15.3.30.5.15 | current |
| topologyStatGroup OBJECT-GROUP List of objects for defining topology statics. | 1.3.6.1.4.1.4329.15.3.30.5.16 | current |
| loadGroup OBJECT-GROUP A collection of objects providing Load Group creation and its attributes. | 1.3.6.1.4.1.4329.15.3.30.5.17 | current |
| widsWipsObjectsGroup OBJECT-GROUP Objects defining the state of WIDS-WIPS for the controller. | 1.3.6.1.4.1.4329.15.3.30.5.18 | current |
| widsWipsEngineGroup OBJECT-GROUP Set of objects defining attributes of a WIDS-WIPS engine. | 1.3.6.1.4.1.4329.15.3.30.5.19 | current |
| outOfServiceScanGroup OBJECT-GROUP List of objects for defining out-of-service scan group. | 1.3.6.1.4.1.4329.15.3.30.5.20 | current |
| inServiceScanGroup OBJECT-GROUP List of objects for defining in-service scan group. | 1.3.6.1.4.1.4329.15.3.30.5.21 | current |
| scanGroupAPAssignmentGroup OBJECT-GROUP List of objects for assignment of AP to scan group. | 1.3.6.1.4.1.4329.15.3.30.5.22 | current |
| scanAPGroup OBJECT-GROUP List of objects for defining AP scan groups in EWC. | 1.3.6.1.4.1.4329.15.3.30.5.23 | current |
| friendlyAPGroup OBJECT-GROUP List of objects defining friendly APs identified during scanning time. | 1.3.6.1.4.1.4329.15.3.30.5.24 | current |
| wlanSecurityReportGroup OBJECT-GROUP Set of objects defining attributes of security group report. | 1.3.6.1.4.1.4329.15.3.30.5.25 | current |
| apAntennaGroup OBJECT-GROUP A collection of objects defining an antenna attributes for an AP. | 1.3.6.1.4.1.4329.15.3.30.5.26 | current |
| muAccessListGroup OBJECT-GROUP List of objects for creation of MU access list to block MU access, case of black list, or allow access, case of white list to wireless controller resources. | 1.3.6.1.4.1.4329.15.3.30.5.27 | current |
| activeThreatGroup OBJECT-GROUP List of objects defining a discovered security threat. | 1.3.6.1.4.1.4329.15.3.30.5.28 | current |
| countermeasureAPGroup OBJECT-GROUP List of objects defining APs taking part in countermeasure activities to thwart incoming threats. | 1.3.6.1.4.1.4329.15.3.30.5.29 | current |
| blaclistedClientGroup OBJECT-GROUP List of objects identifying blacklisted clients. | 1.3.6.1.4.1.4329.15.3.30.5.30 | current |
| threatSummaryGroup OBJECT-GROUP List of objects defining attributes of known discovered threat. | 1.3.6.1.4.1.4329.15.3.30.5.31 | current |
| licensingInformationGroup OBJECT-GROUP List of objects providing licensing information for the controller system. | 1.3.6.1.4.1.4329.15.3.30.5.32 | current |
| stationsByProtocolGroup OBJECT-GROUP List of objects for aggregated MUs on a specific wireless channel. | 1.3.6.1.4.1.4329.15.3.30.5.33 | current |
| apByChannelGroup OBJECT-GROUP List of objects for aggregated access points on a wireless channel. | 1.3.6.1.4.1.4329.15.3.30.5.34 | current |
| uncategorizedAPGroup OBJECT-GROUP Objects defining uncategorized access points discovered by Radar application. | 1.3.6.1.4.1.4329.15.3.30.5.35 | current |
| authorizedAPGroup OBJECT-GROUP Objects defining authorized access points discovered by Radar application. | 1.3.6.1.4.1.4329.15.3.30.5.36 | current |
| prohibitedAPGroup OBJECT-GROUP Objects defining prohibited access points discovered by Radar application. | 1.3.6.1.4.1.4329.15.3.30.5.37 | current |
| dedicatedScanGroup OBJECT-GROUP List of objects for defining dedicated scan group. | 1.3.6.1.4.1.4329.15.3.30.5.38 | current |
| apRadioAntennaGroup OBJECT-GROUP A collection of objects defining an antenna attributes for an AP. | 1.3.6.1.4.1.4329.15.3.30.5.39 | current |
| radiusFastFailoverEventsGroup OBJECT-GROUP List of objects for defining radius FastFailoverEvents. | 1.3.6.1.4.1.4329.15.3.30.5.40 | current |
| dhcpRelayListenersGroup OBJECT-GROUP List of objects for defining dhcpRelayListeners. | 1.3.6.1.4.1.4329.15.3.30.5.41 | current |
| authenticationAdvancedGroup OBJECT-GROUP List of objects for defining authenticationAdvanced. | 1.3.6.1.4.1.4329.15.3.30.5.42 | current |
| radiusExtnsSettingGroup OBJECT-GROUP List of objects for defining radiusExtnsSetting. | 1.3.6.1.4.1.4329.15.3.30.5.43 | current |