MIBs Depot

HIPATH-WIRELESS-DOT11-EXTNS-MIB

Registered at
1.3.6.1.4.1.4329.15.3.1
1.3.6.1.4.1.4329.15.5.3
Last updated
2016-02-23 14:46
Organization
Chantry Networks, Inc
Revisions
2016-02-23 14:46, 2015-03-12 15:15, 2013-10-16 15:15, 2013-04-30 15:15, 2011-08-17 18:15, 2011-07-20 11:45, 2011-05-05 09:58, 2011-01-13 11:25, 2010-04-08 17:16, 2009-01-19 14:15, 2008-05-09 16:51, 2007-09-28 14:30, 2006-10-24 13:05, 2005-10-28 01:14
Namespace
ewc
Source file
HIPATH-WIRELESS-DOT11-EXTNS-MIB
Digest
sha256:73a68c03ced22757f8927b7aa27704a6f97902ebb927771a13956546dd4c68ba

Description

This module provides extension objects to the ieee80211 MIB.

Contact

Chantry Networks, Inc. 55 Commerce Valley Drive (W), Suite 400 Thornhill, Ontario L3T 7V9, Canada Phone: 1-289-695-3182 Fax: 1 289-695-3299

Imports

FromSymbols
HIPATH-WIRELESS-SMIhiPathWirelessMgmt, hiPathWirelessModules
IEEE802dot11-MIBdot11WEPDefaultKeyIndex
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HIPATH-WIRELESS-DOT11-EXTNS-MIB
HIPATH-WIRELESS-SMI
IANAifType-MIB
IEEE802dot11-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
WEPKeytype
type

Objects

NameOIDSyntaxAccessStatus
dot11ExtnsMib
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1
dot11Extsmt
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1.1
dot11ExtBSSIDTable
OBJECT-TYPE
The dot11ExtBSSIDTable contains a list of the BSS (Basic Service Set) Identifiers supported by each radio, and associates an SSID with with each BSS.
1.3.6.1.4.1.4329.15.3.1.1.1not-accessiblecurrent
dot11ExtBSSIDEntry
OBJECT-TYPE
An entry in the BSSID table.
1.3.6.1.4.1.4329.15.3.1.1.1.1not-accessiblecurrent
dot11ExtBSSIndex
OBJECT-TYPE
A unique value, greater than zero, that identifies each Basic Service Set Identifier (BSSID) supported by a radio.
1.3.6.1.4.1.4329.15.3.1.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
dot11ExtBSSID
OBJECT-TYPE
The Basic Service Set Identifier (BSSID) uniquely identifies a wireless network adapter. In the case of the AP2620, a radio can support up to 8 distinct BSSIDs.
1.3.6.1.4.1.4329.15.3.1.1.1.1.2MacAddressread-onlycurrent
dot11ExtSSIDID
OBJECT-TYPE
SSIDID is a High Path Wireless internal numeric identifier for the SSID. This number is meaningless external to the product.
1.3.6.1.4.1.4329.15.3.1.1.1.1.3Integer32 (0..2147483647)read-writecurrent
dot11ExtSSID
OBJECT-TYPE
The Service Set Identifier (SSID) is the network name identifying the wireless network to which this adapter belongs.
1.3.6.1.4.1.4329.15.3.1.1.1.1.4OCTET STRING (SIZE(0..32))read-writecurrent
dot11ExtBSSIDWEPKeyIndex
OBJECT-TYPE
Specifies the WEP default key associated with this BSS from the ieee802dot11 dot11WEPDefaultKeysTable.
1.3.6.1.4.1.4329.15.3.1.1.1.1.5Integer32read-writecurrent
dot11ExtSSIDSuppress
OBJECT-TYPE
When True, the radio will not broadcast the SSID associated with this BSSID in the beacons.
1.3.6.1.4.1.4329.15.3.1.1.1.1.6TruthValueread-writecurrent
dot11ExtPriorityTrafficHandling
OBJECT-TYPE
When True, priority traffic handling is enabled for this BSSID.
1.3.6.1.4.1.4329.15.3.1.1.1.1.7TruthValueread-writecurrent
dot11ExtWEPKeyMappingsTable
OBJECT-TYPE
The dot11ExtWEPKeyMappingsTable supports the ability to configure a separate WEP key for each BSS/Station pairing. The WEPKeyMappingValues in this table are logically WRITE-ONLY. Any attempt to read these values will return null or 0.
1.3.6.1.4.1.4329.15.3.1.1.2not-accessibledeprecated
dot11ExtWEPKeyMappingsEntry
OBJECT-TYPE
An entry in the dot11ExtWEPKeyMappingsTable.
1.3.6.1.4.1.4329.15.3.1.1.2.1not-accessiblecurrent
dot11ExtWEPKeyMappingIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table.
1.3.6.1.4.1.4329.15.3.1.1.2.1.1Integer32 (1..2147483647)read-onlycurrent
dot11ExtWEPKeyMappingAddress
OBJECT-TYPE
The MAC address of the STA for which the values from this key mapping entry are to be used.
1.3.6.1.4.1.4329.15.3.1.1.2.1.2MacAddressread-createcurrent
dot11ExtWEPKeyMappingWEPOn
OBJECT-TYPE
Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA.
1.3.6.1.4.1.4329.15.3.1.1.2.1.3TruthValueread-createcurrent
dot11ExtWEPKeyMappingValue
OBJECT-TYPE
A WEP secret key value.
1.3.6.1.4.1.4329.15.3.1.1.2.1.4WEPKeytyperead-createcurrent
dot11ExtWEPKeyMappingStatus
OBJECT-TYPE
The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table.
1.3.6.1.4.1.4329.15.3.1.1.2.1.5RowStatusread-createcurrent
dot11CapabilitiesTable
OBJECT-TYPE
The dot11CapabilitiesTable contains the 802.11 protocols that each radio in the accessPoint are capable of supporting.
1.3.6.1.4.1.4329.15.3.1.1.3not-accessiblecurrent
dot11CapabilitiesEntry
OBJECT-TYPE
An entry in the dot11CapabilitiesTable.
1.3.6.1.4.1.4329.15.3.1.1.3.1not-accessiblecurrent
dot11Capabilities
OBJECT-TYPE
Describes the capabilities of a radio, for example the protocol supported.
1.3.6.1.4.1.4329.15.3.1.1.3.1.1Bits {dot11b(0), dot11g(1), dot11a(2), dot11j(3), dot11n(4), dot11c(5)}read-writecurrent
dot11bConfigTable
OBJECT-TYPE
The table contains configuration elements specific to the 802.11b protocol.
1.3.6.1.4.1.4329.15.3.1.1.4not-accessiblecurrent
dot11bConfigEntry
OBJECT-TYPE
The dot11bConfigTable contains configuration elements specific to the 802.11b protocol. If an attempt to read the elements is made for a radio which does not support 802.11b, null or 0 will be returned.
1.3.6.1.4.1.4329.15.3.1.1.4.1not-accessiblecurrent
dot11bEnabled
OBJECT-TYPE
When true, 802.1b protocol support is active on this radio.
1.3.6.1.4.1.4329.15.3.1.1.4.1.1TruthValueread-writecurrent
dot11BasicB
OBJECT-TYPE
Specifies the basic rate set for a 11b or 11b+g radio. When set to basic11b, the radio uses all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic rates. When when set to basic11 the radio uses only the two 11 rates (1 and 2 Mbps) as basic rates.
1.3.6.1.4.1.4329.15.3.1.1.4.1.2INTEGER {basic11b(1), basic11(2)}read-writeobsolete
dot11gConfigTable
OBJECT-TYPE
The dot11gConfigTable contains configuration elements specific to the 802.11g protocol. If an attempt to read the elements is made for a radio which does not support 802.11g, null or 0 will be returned.
1.3.6.1.4.1.4329.15.3.1.1.5not-accessiblecurrent
dot11gConfigEntry
OBJECT-TYPE
An entry in the dot11gConfigTable.
1.3.6.1.4.1.4329.15.3.1.1.5.1not-accessiblecurrent
dot11gEnabled
OBJECT-TYPE
When true, 802.1g protocol support is active on this radio.
1.3.6.1.4.1.4329.15.3.1.1.5.1.1TruthValueread-writecurrent
dot11gProtectionMode
OBJECT-TYPE
Configures whether and when to use Protection Mode for the 802.11g transmissions. Protection Mode helps reduce collisions with legacy 802.11b stations at the expense of additional overhead. None specifies that no protection is to be used. Auto specifies that radio will enable protection mode when it detects an 802.11b station. Always specifies that protection mode is always enabled.
1.3.6.1.4.1.4329.15.3.1.1.5.1.3INTEGER {none(1), auto(2), always(3)}read-writecurrent
dot11gProtectionType
OBJECT-TYPE
Determines whether 802.11g Protection Mode uses a RTS-CTS sequence or a CTS-only protection mechanism when Protection Mode is enabled.
1.3.6.1.4.1.4329.15.3.1.1.5.1.4INTEGER {ctsOnly(1), rtcCts(2)}read-writecurrent
dot11gProtectionRate
OBJECT-TYPE
Specifies the rate to be used by RTS or CTS in protection mode.
1.3.6.1.4.1.4329.15.3.1.1.5.1.5INTEGER {rate1Mbps(0), rate2Mbps(1), rate5Mbps(2), rate11Mbps(3)}read-writecurrent
dot11gBasicG
OBJECT-TYPE
Specifies the set of basic rates in 11-g-only mode. Default allows all possible basic rates (1, 2, 5.5, 11, 6, 12 and 24 Mbps). Basic11 specifies only 11 rates (1 nad 2 Mbps) as basic. Basic11b specifies all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic. OFDM specifies only OFDM rates (6, 12 and 24 Mbps) as basic.
1.3.6.1.4.1.4329.15.3.1.1.5.1.6INTEGER {default(1), basic11(2), basic11b(3), ofdm(4)}read-writeobsolete
dot11gProtectionModeSelected
OBJECT-TYPE
Protection mode selected by Access Point. Values are: off(0) = protection mode is set to off by Access Point. on(1) = protection mode is set to on by Access Point. notAvailable(2) = protection mode status is not available, either due to Access Point's version or stats have not yet been collected by Controller.
1.3.6.1.4.1.4329.15.3.1.1.5.1.7INTEGER {off(0), on(1), notAvailable(2)}read-writecurrent
dot11ExtSmtTable
OBJECT-TYPE
Extended settings table.
1.3.6.1.4.1.4329.15.3.1.1.7not-accessiblecurrent
dot11ExtSmtEntry
OBJECT-TYPE
An entry in the Extended settings table dot11ExtSmtTable.
1.3.6.1.4.1.4329.15.3.1.1.7.1not-accessiblecurrent
smtShortPreambleInvoked
OBJECT-TYPE
Specifies the type of preamble used in an 11b/g radio: always short, always long or automatically selected.
1.3.6.1.4.1.4329.15.3.1.1.7.1.1INTEGER {notApplicable(0), shortPreamble(1), longPreamble(2), autoSelectPreamble(3)}read-writecurrent
dot11ExtSmtCurrentChannel
OBJECT-TYPE
Specfies the current radio channel. Value of zero means 'auto' selection.
1.3.6.1.4.1.4329.15.3.1.1.7.1.2Integer32 (0..2147483647)read-writecurrent
dot11ExtSmtMaxBasicRate
OBJECT-TYPE
Specifies the maximum basic rate.
1.3.6.1.4.1.4329.15.3.1.1.7.1.3OCTET STRING (SIZE(1..126))read-writedeprecated
dot11ExtSmtMinBasicRate
OBJECT-TYPE
Specifies the minimum basic rate which is also the minimum operational rate.
1.3.6.1.4.1.4329.15.3.1.1.7.1.4OCTET STRING (SIZE(1..126))read-writecurrent
dot11ExtSmtMaxOperationalRate
OBJECT-TYPE
Specifies the maximum operational rate.
1.3.6.1.4.1.4329.15.3.1.1.7.1.5OCTET STRING (SIZE(1..126))read-writedeprecated
dot11ExtSmtCurChanSelectedByAP
OBJECT-TYPE
Current channel selected by Access Point.
1.3.6.1.4.1.4329.15.3.1.1.7.1.6Integer32read-writecurrent
dot11ExtSmtRFDomain
OBJECT-TYPE
Identifies a radio as belonging to an RF Domain. This is used to provide dynamic radio management when all SSIDs are suppressed.
1.3.6.1.4.1.4329.15.3.1.1.7.1.7DisplayStringread-writecurrent
dot11ExtSmtAutoTxPowerCtrl
OBJECT-TYPE
Auto Transmission Power Control.
1.3.6.1.4.1.4329.15.3.1.1.7.1.8Integer32read-writecurrent
dot11ExtSmtCurrentTxPowerLevel
OBJECT-TYPE
Current transmission power level of the radio.
1.3.6.1.4.1.4329.15.3.1.1.7.1.9Integer32read-writecurrent
dot11ExtSmtMaxTxPower
OBJECT-TYPE
Maximum transmission power level of the radio.
1.3.6.1.4.1.4329.15.3.1.1.7.1.10Integer32read-writecurrent
dot11ExtSmtMinTxPower
OBJECT-TYPE
Minimum transmission power level of the radio.
1.3.6.1.4.1.4329.15.3.1.1.7.1.11Integer32read-writecurrent
dot11ExtSmtAutoTxPowerCtrlAdjust
OBJECT-TYPE
Auto Transmission Power Control adjust.
1.3.6.1.4.1.4329.15.3.1.1.7.1.12Integer32read-writecurrent
dot11ExtSmtBGretries
OBJECT-TYPE
Number of retries for Background traffics.
1.3.6.1.4.1.4329.15.3.1.1.7.1.13Integer32 (0..10)read-writedeprecated
dot11ExtSmtBEretries
OBJECT-TYPE
Number of retries for Best Efforts traffics.
1.3.6.1.4.1.4329.15.3.1.1.7.1.14Integer32 (0..10)read-writedeprecated
dot11ExtSmtVIretries
OBJECT-TYPE
Number of retries for Video traffics.
1.3.6.1.4.1.4329.15.3.1.1.7.1.15Integer32 (0..10)read-writedeprecated
dot11ExtSmtVOretries
OBJECT-TYPE
Number of retries for Voice traffics.
1.3.6.1.4.1.4329.15.3.1.1.7.1.16Integer32 (0..10)read-writedeprecated
dot11ExtSmtTVOretries
OBJECT-TYPE
Number of retries for Turbo Voice traffics.
1.3.6.1.4.1.4329.15.3.1.1.7.1.17Integer32 (0..10)read-writedeprecated
dot11ExtSmtDcsMode
OBJECT-TYPE
DCS operation mode.
1.3.6.1.4.1.4329.15.3.1.1.7.1.18INTEGER {off(0), monitor(1), active(2)}read-writecurrent
dot11ExtSmtDcsNoiseThreshold
OBJECT-TYPE
DCS Nose Threshould. It determines at which interface level the AP will decide to look for a ne operating channel. The unit is dBm. It is valid only when DCS operation mode is set to monitor or active
1.3.6.1.4.1.4329.15.3.1.1.7.1.19Integer32 (-95..-50)read-writecurrent
dot11ExtSmtDcsChlOccThreshold
OBJECT-TYPE
DCS Channel Occupancy Threshold. It determines at which channel utilization the AP decides to look for a new operating channel. The unit is % percentage. It is valid only when DCS operation mode is set to monitor or active
1.3.6.1.4.1.4329.15.3.1.1.7.1.20Integer32 (10..100)read-writecurrent
dot11ExtSmtDcsUpdatePeriod
OBJECT-TYPE
DCS Update Period. It determines the period during which the AP averages the DCS Noise Threshold & DCS channel Occupancy Threshold measurements. The unit is minutes. The range is 1-15. The 0 means DCS is disabled. It is valid only when DCS operation mode is set to monitor or active
1.3.6.1.4.1.4329.15.3.1.1.7.1.21Integer32 (0..15)read-writecurrent
dot11ExtSmtDcsChannelSelection
OBJECT-TYPE
DCS Channel Plan Selection.It is Bitmask of: 1 = all chls (only A), 2 = 3 chls (only BG), 4 = 4 chls (only BG), 8 = auto (only BG), 16 = custom
1.3.6.1.4.1.4329.15.3.1.1.7.1.22Integer32 (0..255)read-writecurrent
dot11ExtSmtDcsChannelList
OBJECT-TYPE
DCS Channel Plan List.It is custom channel plan. It is valid only when DCS Channel Plan Selection is set to custom
1.3.6.1.4.1.4329.15.3.1.1.7.1.23DisplayStringread-writecurrent
dot11ExtSmtRadioAttenuation
OBJECT-TYPE
Attenuation of cable between external antenna and AP in db. value -1 : not configured.
1.3.6.1.4.1.4329.15.3.1.1.7.1.24Integer32read-writecurrent
dot11ExtSmtProbeSuppression
OBJECT-TYPE
Enables/Disables probe suppression. Default is disabled.
1.3.6.1.4.1.4329.15.3.1.1.7.1.25INTEGER {disable(0), enable(1)}read-writecurrent
dot11ExtSmtForceDisassociate
OBJECT-TYPE
IF force-disassoc is enabled, Clients that are associated are sent a Disassoc if the averaged RSS is < RSS-threshold -5dBm (with some hysteresis). Default is disabled.
1.3.6.1.4.1.4329.15.3.1.1.7.1.26INTEGER {disable(0), enable(1)}read-writecurrent
dot11ExtSmtRssThreshold
OBJECT-TYPE
The radio probe suppression RSS threshold. The range is from -50dBm to -100dBm. Default value is -90dBm.
1.3.6.1.4.1.4329.15.3.1.1.7.1.27Integer32read-writecurrent
dot11ExtVlanSmtTable
OBJECT-TYPE
This table contains configuration about bridging mode for the radio.
1.3.6.1.4.1.4329.15.3.1.1.8not-accessiblecurrent
dot11ExtVlanSmtEntry
OBJECT-TYPE
An entry in dot11ExtVlanSmtTable table.
1.3.6.1.4.1.4329.15.3.1.1.8.1not-accessiblecurrent
vlanBridgeMode
OBJECT-TYPE
When true, bridging mode is enabled on this radio.
1.3.6.1.4.1.4329.15.3.1.1.8.1.1TruthValueread-writeobsolete
vlanTag
OBJECT-TYPE
Integer specifying the VLAN tag. If untagged, returns -1.
1.3.6.1.4.1.4329.15.3.1.1.8.1.2Integer32read-writeobsolete
dot11DiversityTable
OBJECT-TYPE
List of configuration elements specific to diversity support.
1.3.6.1.4.1.4329.15.3.1.1.10not-accessiblecurrent
dot11DiversityEntry
OBJECT-TYPE
An entry in the dot11DiversityTable.
1.3.6.1.4.1.4329.15.3.1.1.10.1not-accessiblecurrent
dot11DiversityRxDiversity
OBJECT-TYPE
Diversity support for reception.
1.3.6.1.4.1.4329.15.3.1.1.10.1.1INTEGER {notSupport(0), best(1), left(2), right(3)}read-writecurrent
dot11DiversityTxDiversity
OBJECT-TYPE
Diversity support for transmission.
1.3.6.1.4.1.4329.15.3.1.1.10.1.2INTEGER {notSupport(0), best(1), left(2), right(3)}read-writecurrent
dot11AntennaSelection
OBJECT-TYPE
Antenna Selection for transmission and reception.
1.3.6.1.4.1.4329.15.3.1.1.10.1.3INTEGER {none(0), left(1), middle(2), leftMiddle(3), right(4), leftRight(5), middleRight(6), leftMiddleRight(7)}read-writecurrent
dot11nConfigTable
OBJECT-TYPE
The dot11nConfigTable contains configuration elements specific to the 802.11n protocol. If an attempt to read the elements is made for a radio which does not support 802.11n, null or 0 will be returned.
1.3.6.1.4.1.4329.15.3.1.1.11not-accessiblecurrent
dot11nConfigEntry
OBJECT-TYPE
An entry in the dot11nConfigTable.
1.3.6.1.4.1.4329.15.3.1.1.11.1not-accessiblecurrent
dot11nEnabled
OBJECT-TYPE
When true, 802.1n protocol support is active on this radio.
1.3.6.1.4.1.4329.15.3.1.1.11.1.1TruthValueread-writecurrent
dot11nChlBonding
OBJECT-TYPE
802.11n protocol Channel Bonding.
1.3.6.1.4.1.4329.15.3.1.1.11.1.2INTEGER {nobond(0), up(1), down(2)}read-writecurrent
dot11nChlWidth
OBJECT-TYPE
802.11n protocol Channel Width.
1.3.6.1.4.1.4329.15.3.1.1.11.1.3INTEGER {width20Mhz(1), width40Mhz(2), auto(3), width80Mhz(4)}read-writecurrent
dot11nChlGuardInterval
OBJECT-TYPE
802.11n protocol Guard Interval.
1.3.6.1.4.1.4329.15.3.1.1.11.1.4INTEGER {short(1), long(2)}read-writecurrent
dot11nProtectEnabled
OBJECT-TYPE
802.11n protocol Channel Protectino Mode.
1.3.6.1.4.1.4329.15.3.1.1.11.1.5TruthValueread-writecurrent
dot11nProtectType
OBJECT-TYPE
802.11n protocol 40Mhz Channel Protection Type.
1.3.6.1.4.1.4329.15.3.1.1.11.1.6INTEGER {none(0), ctsOnly(1), rtsCts(2)}read-writecurrent
dot11nProtectOffset
OBJECT-TYPE
802.11n protocol 40Mhz Channel Protection Offset.
1.3.6.1.4.1.4329.15.3.1.1.11.1.7INTEGER {protectOffset20Mhz(1), protectOffset25Mhz(2)}read-writecurrent
dot11nPtotectBusyThr
OBJECT-TYPE
802.11n protocol 40Mhz Channel Protection Busy Threshold.
1.3.6.1.4.1.4329.15.3.1.1.11.1.8INTEGER (0..100)read-writecurrent
dot11nAggrMsduEnabled
OBJECT-TYPE
802.11n protocol Aggregate MSDUs.
1.3.6.1.4.1.4329.15.3.1.1.11.1.9TruthValueread-writecurrent
dot11nAggrMsduMaxLen
OBJECT-TYPE
802.11n protocol Aggregate MSDU Max Length.
1.3.6.1.4.1.4329.15.3.1.1.11.1.10INTEGER (2290..4096)read-writecurrent
dot11nAggrMpduEnabled
OBJECT-TYPE
802.11n protocol Aggregate MPDUs.
1.3.6.1.4.1.4329.15.3.1.1.11.1.11TruthValueread-writecurrent
dot11nAggrMpduMaxLen
OBJECT-TYPE
802.11n protocol Aggregate MPDU Max Length.
1.3.6.1.4.1.4329.15.3.1.1.11.1.12INTEGER (1024..65535)read-writecurrent
dot11nAggrMsduSubFrames
OBJECT-TYPE
802.11n protocol Aggregate MPDU Max Number of Sub-frames.
1.3.6.1.4.1.4329.15.3.1.1.11.1.13INTEGER (2..64)read-writecurrent
dot11nAddbaSupEnabled
OBJECT-TYPE
802.11n protocol ADDBA Support.
1.3.6.1.4.1.4329.15.3.1.1.11.1.14TruthValueread-writecurrent
dot11nConfigLDPC
OBJECT-TYPE
Advanced error-detecting coding using Low Density Parity Check codes to increase the reliability of the transmission.
1.3.6.1.4.1.4329.15.3.1.1.11.1.15TruthValueread-writecurrent
dot11nConfigSTBC
OBJECT-TYPE
A simple transmit diversity scheme using Space Time Block Coding to provide added robustness for devices where there are more transmit chains than receiver chains.
1.3.6.1.4.1.4329.15.3.1.1.11.1.16TruthValueread-writecurrent
dot11nConfigTXBF
OBJECT-TYPE
An advanced transmit diversity scheme performing transmit beamforming to generate signals that can be optimally received to enhance the reliability and performance of wireless links.
1.3.6.1.4.1.4329.15.3.1.1.11.1.17TruthValueread-writecurrent
dot11ExtAPObjs
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1.2
dot1XConfigTable
OBJECT-TYPE
Conceptual table for 802.1X settings required for wireless security.
1.3.6.1.4.1.4329.15.3.1.2.2not-accessiblecurrent
dot1XConfigEntry
OBJECT-TYPE
An entry in dot1XConfigTable table.
1.3.6.1.4.1.4329.15.3.1.2.2.1not-accessiblecurrent
dot1XEnabled
OBJECT-TYPE
Enable 802.1X authentication for this BSSID.
1.3.6.1.4.1.4329.15.3.1.2.2.1.1TruthValueread-writecurrent
dot1XDynamicRekeyingInterval
OBJECT-TYPE
This object defines the time period, in seconds, after which the key value must be updated.
1.3.6.1.4.1.4329.15.3.1.2.2.1.2Unsigned32read-writecurrent
dot1XWPA1Enabled
OBJECT-TYPE
Enables WPA.1 (Wi-Fi Protected Access) on this BSSID
1.3.6.1.4.1.4329.15.3.1.2.2.1.3TruthValueread-writecurrent
dot1XWPAPassphrase
OBJECT-TYPE
Specifies the WPA passphrase for the BSSID. This element is logically write only. Any attempt to read this element will result in null or 0.
1.3.6.1.4.1.4329.15.3.1.2.2.1.4DisplayStringread-writecurrent
dot1XWPACipherType
OBJECT-TYPE
Defines the encryption algoritms allowed with WPA: only TKIP if tkipOnly or both AES and TKIP if auto. This value has meaning if WPA.1 is enabled.
1.3.6.1.4.1.4329.15.3.1.2.2.1.5INTEGER {tkipOnly(1), auto(2)}read-writecurrent
dot1XWPA2Enabled
OBJECT-TYPE
When true, WPA v.2 support is enabled.
1.3.6.1.4.1.4329.15.3.1.2.2.1.6TruthValueread-writecurrent
dot1XWPA2CipherType
OBJECT-TYPE
Defines the encryption algoritms allowed with WPA2: only AES if aesOnly or both AES and TKIP if auto. This value has meaning if WPA.2 is enabled.
1.3.6.1.4.1.4329.15.3.1.2.2.1.7INTEGER {auto(2), aesOnly(3)}read-writecurrent
dot1XConfigKeyManagement
OBJECT-TYPE
Key caching method in use. This field has meaning when dot1XEnabled is true and WPAv2 is enabled.
1.3.6.1.4.1.4329.15.3.1.2.2.1.8INTEGER {none(0), opportunisticKeying(1), preAuthentication(2), opportunisticKeyingAndPreauth(3)}read-writecurrent
dot11ExtCounters
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1.4
assocGroupTable
OBJECT-TYPE
STA statistics table.
1.3.6.1.4.1.4329.15.3.1.4.1not-accessiblecurrent
assocGroupEntry
OBJECT-TYPE
Entry in the STA statistics table.
1.3.6.1.4.1.4329.15.3.1.4.1.1not-accessiblecurrent
assocAddress
OBJECT-TYPE
MAC address associated with the client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.1MacAddressread-onlycurrent
assocIfIndex
OBJECT-TYPE
Index of the radio mode with which the client is associated. Values are: 11A =1, 11G =2 and 11B =3. Symbols notation: modeN50 = an = n5.0Ghz, modeN24 = bgn = n2.4Ghz.
1.3.6.1.4.1.4329.15.3.1.4.1.1.2INTEGER {unknown(0), mode11A(1), mode11G(2), mode11B(3), modeN50(4), modeN24(5), mode11AC(6)}read-onlycurrent
assocReceivedRSSI
OBJECT-TYPE
RSSI - Received Signal Strength Indicator. RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power. RSSI is a normalized indicator of RSS in which RSS is scaled to some vendor specific range.
1.3.6.1.4.1.4329.15.3.1.4.1.1.3Integer32read-onlycurrent
assocTransmittedRSSI
OBJECT-TYPE
Received signal strength averaged for the ACK packets received in response to transmitted packets for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.4Integer32read-onlycurrent
assocReceivedRate
OBJECT-TYPE
PHY rate for the packets received from this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.5Unsigned32read-onlycurrent
assocTransmittedRate
OBJECT-TYPE
PHY rate used to transmit packets for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.6Unsigned32read-onlycurrent
assocReceivedFrameCount
OBJECT-TYPE
Frames received from this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.7Counter64read-onlycurrent
assocTransmittedFrameCount
OBJECT-TYPE
Frames transmitted for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.8Counter64read-onlycurrent
assocReceiveErrors
OBJECT-TYPE
Frames received with errors from this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.9Counter64read-onlycurrent
assocTransmitErrors
OBJECT-TYPE
Frames transmitted with errors (not acknowledged) for this cleint.
1.3.6.1.4.1.4329.15.3.1.4.1.1.10Counter64read-onlycurrent
assocTransmitBytes
OBJECT-TYPE
Bytes transmitted for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.11Counter64read-onlycurrent
assocReceiveBytes
OBJECT-TYPE
Bytes received from this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.12Counter64read-onlycurrent
assocReceivedRSS
OBJECT-TYPE
RSS - Received Signal Strength. RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power. RSS is the actual signal strength measured at the receiver. It is typically measured in units of dBm.
1.3.6.1.4.1.4329.15.3.1.4.1.1.13Integer32read-onlycurrent
assocDLLostRetriesPackets
OBJECT-TYPE
Number of downlink (the transmission path is from Access Point to client) lost packets due to excessive retries for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.14Integer32read-onlycurrent
assocDLLostRetriesBytes
OBJECT-TYPE
Number of downlink (the transmission path is from Access Point to client) lost bytes due to excessive retries for this client.
1.3.6.1.4.1.4329.15.3.1.4.1.1.15Integer32read-onlycurrent
assocCountersTable
OBJECT-TYPE
STA association statistics table.
1.3.6.1.4.1.4329.15.3.1.4.2not-accessiblecurrent
assocCountersEntry
OBJECT-TYPE
Entry in the STA association statistics table.
1.3.6.1.4.1.4329.15.3.1.4.2.1not-accessiblecurrent
assocAuthenticationCount
OBJECT-TYPE
Number of authentications for this client.
1.3.6.1.4.1.4329.15.3.1.4.2.1.1Counter64read-onlycurrent
assocDeauthenticationCount
OBJECT-TYPE
Number of deauthentications for this client.
1.3.6.1.4.1.4329.15.3.1.4.2.1.2Counter64read-onlycurrent
assocAssociationCount
OBJECT-TYPE
Number of associations for this client.
1.3.6.1.4.1.4329.15.3.1.4.2.1.3Counter64read-onlycurrent
assocDeassociationCount
OBJECT-TYPE
Number of deassociations for this client.
1.3.6.1.4.1.4329.15.3.1.4.2.1.4Counter64read-onlycurrent
assocReassociationCount
OBJECT-TYPE
Number of reassociations for this client.
1.3.6.1.4.1.4329.15.3.1.4.2.1.5Counter64read-onlycurrent
dot11ExtRadioStatsTable
OBJECT-TYPE
Table of statistics for the dot11 radio.
1.3.6.1.4.1.4329.15.3.1.4.3not-accessiblecurrent
dot11ExtRadioStatsEntry
OBJECT-TYPE
An entry in the dot11ExtRadioStatsEntry.
1.3.6.1.4.1.4329.15.3.1.4.3.1not-accessiblecurrent
dot11ExtRadioType
OBJECT-TYPE
Indicates the type of radio (a/an or b/g/bgn).
1.3.6.1.4.1.4329.15.3.1.4.3.1.1INTEGER {off(0), dot11a(1), dot11an(2), dot11anStrict(3), dot11b(4), dot11g(5), dot11bg(6), dot11gn(7), dot11bgn(8), dot11gnStrict(9), dot11j(10), dot11ac(11), dot11cStrict(12)}read-onlycurrent
dot11ExtRadioInUcastPkts
OBJECT-TYPE
Number of unicast packets from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.2Counter64read-onlycurrent
dot11ExtRadioInMcastPkts
OBJECT-TYPE
Number of multicast packets from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.3Counter64read-onlycurrent
dot11ExtRadioInBcastPkts
OBJECT-TYPE
Number of broadcast packets from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.4Counter64read-onlycurrent
dot11ExtRadioInOctets
OBJECT-TYPE
Total bytes from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.5Counter64read-onlycurrent
dot11ExtRadioInErrors
OBJECT-TYPE
Number of error packets from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.6Counter64read-onlycurrent
dot11ExtRadioInDiscardsPkts
OBJECT-TYPE
Number of discarded packets from wireless-to-wired network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.7Counter64read-onlycurrent
dot11ExtRadioOutUcastPkts
OBJECT-TYPE
Number of unicast packets from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.8Counter64read-onlycurrent
dot11ExtRadioOutMcastPkts
OBJECT-TYPE
Number of multicast packets from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.9Counter64read-onlycurrent
dot11ExtRadioOutBcastPkts
OBJECT-TYPE
Number of broadcast from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.10Counter64read-onlycurrent
dot11ExtRadioOutOctets
OBJECT-TYPE
Total bytes from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.11Counter64read-onlycurrent
dot11ExtRadioOutErrors
OBJECT-TYPE
Number of error packets from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.12Counter64read-onlycurrent
dot11ExtRadioOutDiscardsPkts
OBJECT-TYPE
Number of discarded packets from wired-to-wireless network at this radio.
1.3.6.1.4.1.4329.15.3.1.4.3.1.13Counter64read-onlycurrent
dot11ExtRadioWepIcvErrorCount
OBJECT-TYPE
Number of WEP ICV Errors.
1.3.6.1.4.1.4329.15.3.1.4.3.1.14Counter64read-onlycurrent
dot11ExtRadioWepExcludedCount
OBJECT-TYPE
Number of WEP excluded.
1.3.6.1.4.1.4329.15.3.1.4.3.1.15Counter64read-onlycurrent
dot11ExtRadioRetryCount
OBJECT-TYPE
Number of retry frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.16Counter64read-onlycurrent
dot11ExtRadioMultipleRetryCount
OBJECT-TYPE
Number of multiple retries frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.17Counter64read-onlycurrent
dot11ExtRadioRtsSuccessCount
OBJECT-TYPE
Number of successful RTS frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.18Counter64read-onlycurrent
dot11ExtRadioRtsFailCount
OBJECT-TYPE
Number of failed RTS frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.19Counter64read-onlycurrent
dot11ExtRadioAckFailCount
OBJECT-TYPE
Number of failed ACK frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.20Counter64read-onlycurrent
dot11ExtRadioFrameDupCount
OBJECT-TYPE
Number of duplicated frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.21Counter64read-onlycurrent
dot11ExtRadioTransFragCount
OBJECT-TYPE
Number of transmitted fragment.
1.3.6.1.4.1.4329.15.3.1.4.3.1.22Counter64read-onlycurrent
dot11ExtRadioMulTransFrameCount
OBJECT-TYPE
Number of transmitted multicast fragment.
1.3.6.1.4.1.4329.15.3.1.4.3.1.23Counter64read-onlycurrent
dot11ExtRadioFailedCount
OBJECT-TYPE
Number of failed frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.24Counter64read-onlycurrent
dot11ExtRadioReceivedFragCount
OBJECT-TYPE
Number of received fragment.
1.3.6.1.4.1.4329.15.3.1.4.3.1.25Counter64read-onlycurrent
dot11ExtRadioMulRecFrameCount
OBJECT-TYPE
Number of received multicast frame.
1.3.6.1.4.1.4329.15.3.1.4.3.1.26Counter64read-onlycurrent
dot11ExtRadioFcsErrorCount
OBJECT-TYPE
Number of FCS errors frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.27Counter64read-onlycurrent
dot11ExtRadioWepUndecrypCount
OBJECT-TYPE
Number of undecryptable WEP frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.28Counter64read-onlycurrent
dot11ExtRadioTransFrameCount
OBJECT-TYPE
Number of transmitted frames.
1.3.6.1.4.1.4329.15.3.1.4.3.1.29Counter64read-onlycurrent
dot11ExtRadioDeauthCacCount
OBJECT-TYPE
Number of deauthentications due to CAC.
1.3.6.1.4.1.4329.15.3.1.4.3.1.30Counter64read-onlycurrent
dot11ExtRadioAvgNfCount
OBJECT-TYPE
Noise floor measured by the AP on the 802.11 channel. Noise floor is measured during the quiet time, between the valid transmission or reception of 802.11 frames. Variable is reported as average over the last 30 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.31INTEGER (50..100)read-onlycurrent
dot11ExtRadioMaxNfCount
OBJECT-TYPE
Maximum noise floor measured by the AP on the 802.11 channel. Noise floor is measured during the quiet time, between the valid transmission or reception of 802.11 frames. Variable is reported as max over the last 30 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.32INTEGER (50..100)read-onlycurrent
dot11ExtRadioAvgChlOccCount
OBJECT-TYPE
Average DCS Channel Utilization by Adjacent APs [%].
1.3.6.1.4.1.4329.15.3.1.4.3.1.33INTEGER (0..100)read-onlycurrent
dot11ExtRadioMaxChlOccCount
OBJECT-TYPE
Maximum DCS Channel Utilization by Adjacent APs [%].
1.3.6.1.4.1.4329.15.3.1.4.3.1.34INTEGER (0..100)read-onlycurrent
dot11ExtRadioAvgTxOccCount
OBJECT-TYPE
TxOccupancy variable reports the time (in %) AP was transmitting during the last 100 seconds. During AP transmission all other STA/AP's has only receive access to the channel. Variable is reported as average over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.35INTEGER (0..100)read-onlycurrent
dot11ExtRadioMaxTxOccCount
OBJECT-TYPE
TxOccupancy variable reports the maximum time (in %) AP was transmitting during the last 100 seconds. During AP transmission all other STA/AP's has only receive access to the channel. Variable is reported as max over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.36INTEGER (0..100)read-onlycurrent
dot11ExtRadioAvgRxOccCount
OBJECT-TYPE
Average DCS RX Channel Utilization [%].
1.3.6.1.4.1.4329.15.3.1.4.3.1.37INTEGER (0..100)read-onlycurrent
dot11ExtRadioMaxRxOccCount
OBJECT-TYPE
Maximum DCS RX Channel Utilization [%].
1.3.6.1.4.1.4329.15.3.1.4.3.1.38INTEGER (0..100)read-onlycurrent
dot11ExtRadioAvgBusyChPercentage
OBJECT-TYPE
STA/AP performs clear channel assessment before transmitting on the 802.11 wireless channel. BusyChannel variable reports the time (in % ) that channel was busy during the last 100 seconds. Channel is busy either because there is interference with energy above a threshold (-62dBm) or because there is active transmission of other STA or AP. BusyChannel is indicator of the congestions and interference on the channel. Variable is reported as average over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.39Unsigned32read-onlycurrent
dot11ExtRadioMaxBusyChPercentage
OBJECT-TYPE
STA/AP performs clear channel assessment before transmitting on the 802.11 wireless channel. BusyChannel variable reports the maximum time (in % ) that channel was busy during the last 100 seconds. Channel is busy either because there is an interference with energy above a threshold (-62dBm) or because there is an active transmission of other STA or AP. BusyChannel is indicator of the congestions and interference on the channel. Variable is reported as maximum over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.40Unsigned32read-onlycurrent
dot11ExtRadioAvgRxChOccPercentage
OBJECT-TYPE
RxOccupancy variable reports the time (in %) AP received valid 802.11 frames on the radio receiver during the last 100 seconds. Variable counts all 802.11 frames sensed on the channel, including the frames not destined to this AP and rejected by the AP. Variable does not count signals (interference) that is not recognized as valid 802.11 signal. Variable is reported as average over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.41Unsigned32read-onlycurrent
dot11ExtRadioMaxRxChOccPercentage
OBJECT-TYPE
RxOccupancy variable reports the maximum time (in %) AP received valid 802.11 frames on the radio receiver during the last 100 seconds. Variable counts all the 802.11 frames sensed on the channel, including the frames not destined to this AP and rejected by the AP. Variable does not count signals (interference) that is not recognized as valid 802.11 signal. Variable is reported as max over the last 100 seconds.
1.3.6.1.4.1.4329.15.3.1.4.3.1.42Unsigned32read-onlycurrent
dot11ExtConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1.5
dot11EWCGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4329.15.3.1.5.4

Conformance

NameOIDStatus
hiPathWirelessDot11ExtModule
MODULE-COMPLIANCE
HIPATH-WIRELESS-DOT11-EXTNS module compliance.
1.3.6.1.4.1.4329.15.3.1.5.1current
hiPathWirelessDot11ExtGroups
OBJECT-GROUP
High Path Wireless DOT11-EXTNS object-group.
1.3.6.1.4.1.4329.15.3.1.5.2current
hiPathWirelessDot11ObsoleteGroups
OBJECT-GROUP
Objects in this list are obsolete.
1.3.6.1.4.1.4329.15.3.1.5.3obsolete
dot11nConfigGroup
OBJECT-GROUP
Objects in this group contain attributes of dot11n radio.
1.3.6.1.4.1.4329.15.3.1.5.4.1current
assocGroupGroup
OBJECT-GROUP
Objects in this group contain information about associated MUs.
1.3.6.1.4.1.4329.15.3.1.5.4.2current
assocCountersGroup
OBJECT-GROUP
Objects in this group contain stats related to associated MUs.
1.3.6.1.4.1.4329.15.3.1.5.4.3current
dot11ExtRadioStatsGroup
OBJECT-GROUP
Objects in this group contain statistics related a radio.
1.3.6.1.4.1.4329.15.3.1.5.4.4current