MIBs Depot

HH3C-WLAN-FLEXAPP-CFG-MIB

Registered at
1.3.6.1.4.1.25506.2.75.19
Last updated
2015-05-26 18:00
Organization
New H3C Technologies Co., Ltd.
Revisions
2015-05-26 18:00
Namespace
comware
Source file
HH3C-WLAN-FLEXAPP-CFG-MIB
Digest
sha256:800320e415fdeb6d317d025eb3efb59dab20f979bf0bda6c81228f88fb7394b5

Description

This MIB provides information about WLAN application configuration.

Contact

Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Imports

FromSymbols
HH3C-DOT11-REF-MIBhh3cDot11
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-DOT11-REF-MIB
HH3C-OID-MIB
HH3C-WLAN-FLEXAPP-CFG-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cWlanModuleConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.1
hh3cWlanModuleConfigTable
OBJECT-TYPE
Administrators must configure module parameters for a module to operate.
1.3.6.1.4.1.25506.2.75.19.1.1not-accessiblecurrent
hh3cWlanModuleConfigEntry
OBJECT-TYPE
Each entry contains module configuration information.
1.3.6.1.4.1.25506.2.75.19.1.1.1not-accessiblecurrent
hh3cWlanAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.1.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanModuleID
OBJECT-TYPE
This object represents the module ID of a module.
1.3.6.1.4.1.25506.2.75.19.1.1.1.2Integer32 (1..65535)not-accessiblecurrent
hh3cWlanModuleType
OBJECT-TYPE
This object represents the type of a module.
1.3.6.1.4.1.25506.2.75.19.1.1.1.3INTEGER {none(0), ble(1), iot(2)}read-writecurrent
hh3cWlanModuleStatus
OBJECT-TYPE
This object represents the enabled or disabled status of a module.
1.3.6.1.4.1.25506.2.75.19.1.1.1.4TruthValueread-writecurrent
hh3cWlanModuleReset
OBJECT-TYPE
When read the value from the node none: Represents the module has been rebooted and the status of the module is normal. When write the value to the node reboot: Represents module rebooting. Other values are not supported.
1.3.6.1.4.1.25506.2.75.19.1.1.1.5INTEGER {none(0), reboot(1)}read-writecurrent
hh3cWlanModuleRstFac
OBJECT-TYPE
When read the value from the node none: Represents the module has been restored and the status of the module is normal. When write the value to the node restore: Represents module restoring. Other values are not supported.
1.3.6.1.4.1.25506.2.75.19.1.1.1.6INTEGER {none(0), restore(1)}read-writecurrent
hh3cWlanModuleUpWareStatus
OBJECT-TYPE
This object represents the enabled or disabled status of module auto update.
1.3.6.1.4.1.25506.2.75.19.1.1.1.7TruthValueread-writecurrent
hh3cWlanModuleTxPower
OBJECT-TYPE
This object represents the packet transmit power.
1.3.6.1.4.1.25506.2.75.19.1.1.1.8Integer32 (1..4)read-writecurrent
hh3cWlanModuleManualUpdate
OBJECT-TYPE
This object represents the file path for module firmware updating.
1.3.6.1.4.1.25506.2.75.19.1.1.1.9OCTET STRINGread-writecurrent
hh3cWlanModuleInfoTable
OBJECT-TYPE
The table contains information about each module of an AP.
1.3.6.1.4.1.25506.2.75.19.1.2not-accessiblecurrent
hh3cWlanModuleInfoEntry
OBJECT-TYPE
Each entry contains IOT module information.
1.3.6.1.4.1.25506.2.75.19.1.2.1not-accessiblecurrent
hh3cDot11IOTAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.1.2.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cDot11IOTModuleID
OBJECT-TYPE
This object represents a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.2Integer32 (1..65535)not-accessiblecurrent
hh3cDot11IOTModuleType
OBJECT-TYPE
This object represents the type of a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.3INTEGER {none(0), h3c(1), iot(2)}read-onlycurrent
hh3cDot11IOTModuleModel
OBJECT-TYPE
This object represents the model of a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.4OCTET STRINGread-onlycurrent
hh3cDot11IOTModuleHwVersion
OBJECT-TYPE
This object represents the hardware version of a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.5OCTET STRINGread-onlycurrent
hh3cDot11IOTModuleSwVersion
OBJECT-TYPE
This object represents the software version of a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.6OCTET STRINGread-onlycurrent
hh3cDot11IOTModuleSerialId
OBJECT-TYPE
This object represents the sequence ID of a module.
1.3.6.1.4.1.25506.2.75.19.1.2.1.7OCTET STRINGread-onlycurrent
hh3cWlanIOTConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.2
hh3cWlanIOTConfigTable
OBJECT-TYPE
Administrators must configure IOT parameters.
1.3.6.1.4.1.25506.2.75.19.2.1not-accessiblecurrent
hh3cWlanIOTConfigEntry
OBJECT-TYPE
Each entry contains module configuration information.
1.3.6.1.4.1.25506.2.75.19.2.1.1not-accessiblecurrent
hh3cWlanIOTAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.2.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanIOTEngineAdd
OBJECT-TYPE
This object represents the IPv4 address of the location server.
1.3.6.1.4.1.25506.2.75.19.2.1.1.2IpAddressread-writecurrent
hh3cWlanIOTEnginePort
OBJECT-TYPE
This object represents the UDP port to listen for IOT messages from the server.
1.3.6.1.4.1.25506.2.75.19.2.1.1.3Integer32 (0..65535)read-writecurrent
hh3cWlanModuleNotifyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.3
hh3cWlanModuleTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.3.0
hh3cWlanModuleTrapVarObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.3.1
hh3cWlanTrapAPMacAddress
OBJECT-TYPE
This object represents the MAC address of an AP.
1.3.6.1.4.1.25506.2.75.19.3.1.1MacAddressaccessible-for-notifycurrent
hh3cWlanTrapModuleID
OBJECT-TYPE
This object represents the ID of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.2Integer32accessible-for-notifycurrent
hh3cWlanTrapModuleCfgType
OBJECT-TYPE
This object represents the configuration type of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.3INTEGER {none(0), h3c(1), iot(2)}accessible-for-notifycurrent
hh3cWlanTrapModulePhyType
OBJECT-TYPE
This object represents the physical type of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.4INTEGER {none(0), h3c(1), iot(2)}accessible-for-notifycurrent
hh3cWlanTrapModuleModel
OBJECT-TYPE
This object represents the model of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.5OCTET STRINGaccessible-for-notifycurrent
hh3cWlanTrapModuleHwVersion
OBJECT-TYPE
This object represents the hardware version of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.6OCTET STRINGaccessible-for-notifycurrent
hh3cWlanTrapModuleSwVersion
OBJECT-TYPE
This object represents the software version of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.7OCTET STRINGaccessible-for-notifycurrent
hh3cWlanTrapModuleSequenceId
OBJECT-TYPE
This object represents the sequence ID of a module.
1.3.6.1.4.1.25506.2.75.19.3.1.8OCTET STRINGaccessible-for-notifycurrent
hh3cWlanBLEConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.4
hh3cWlanBLEConfigTable
OBJECT-TYPE
Administrators must configure Bluetooth Low Energy (BLE) parameters.
1.3.6.1.4.1.25506.2.75.19.4.1not-accessiblecurrent
hh3cWlanBLEConfigEntry
OBJECT-TYPE
Each entry contains BLE location configuration information.
1.3.6.1.4.1.25506.2.75.19.4.1.1not-accessiblecurrent
hh3cWlanBLEAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.4.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanBLEStatus
OBJECT-TYPE
This object represents the enabled or disabled status of BLE location.
1.3.6.1.4.1.25506.2.75.19.4.1.1.2TruthValueread-writecurrent
hh3cWlanBLEEngineAdd
OBJECT-TYPE
This object represents the server's IPv4 address to which BLE messages are sent.
1.3.6.1.4.1.25506.2.75.19.4.1.1.3IpAddressread-writecurrent
hh3cWlanBLEEnginePort
OBJECT-TYPE
This object represents the UDP port of the location server.
1.3.6.1.4.1.25506.2.75.19.4.1.1.4Integer32 (0..65535)read-writecurrent
hh3cWlanBLEVendorPort
OBJECT-TYPE
This object represents the UDP port to listen for BLE messages from the server.
1.3.6.1.4.1.25506.2.75.19.4.1.1.5Integer32 (1..65535)read-writecurrent
hh3cWlanBLERssiStatus
OBJECT-TYPE
This object represents the enabled or disabled status of BLE RSSI-based packet filtering.
1.3.6.1.4.1.25506.2.75.19.4.1.1.6TruthValueread-writecurrent
hh3cWlanBLERssiThreshold
OBJECT-TYPE
This object represents the max RSSI value of clients' packets.
1.3.6.1.4.1.25506.2.75.19.4.1.1.7Integer32 (5..255)read-writecurrent
hh3cWlanBLEConnectPassword
OBJECT-TYPE
This object represents the BLE module connection password.
1.3.6.1.4.1.25506.2.75.19.4.1.1.8OCTET STRING (SIZE(0 | 4))read-writecurrent
hh3cWlanBLECommandPassword
OBJECT-TYPE
This object represents the BLE module command password.
1.3.6.1.4.1.25506.2.75.19.4.1.1.9OCTET STRING (SIZE(0 | 12))read-writecurrent
hh3cWlanBLEReportStatus
OBJECT-TYPE
This object represents the enabled or disabled status of BLE location reporting.
1.3.6.1.4.1.25506.2.75.19.4.1.1.10TruthValueread-writecurrent
hh3cWlanBLEReportInterval
OBJECT-TYPE
This object represents the interval at which an AP sends BLE messages to the server.
1.3.6.1.4.1.25506.2.75.19.4.1.1.11Integer32 (1..86400)read-writecurrent
hh3cWlanBLEAgingTime
OBJECT-TYPE
This object represents the aging time for iBeacon devices.
1.3.6.1.4.1.25506.2.75.19.4.1.1.12Integer32 (60..3600)read-writecurrent
hh3cWlanBLERealTimeReportStatus
OBJECT-TYPE
This object represents the enabled or disabled status of BLE realtime reporting.
1.3.6.1.4.1.25506.2.75.19.4.1.1.13TruthValueread-writecurrent
hh3cWlanBLERealTimePrefix
OBJECT-TYPE
This object represents the manufacturer prefix of BLE devices to be located. The prefix must be an even number.
1.3.6.1.4.1.25506.2.75.19.4.1.1.14OCTET STRING (SIZE(0 | 8..18))read-writecurrent
hh3cWlanBLEModuleConfigTable
OBJECT-TYPE
Administrators must configure BLE module parameters.
1.3.6.1.4.1.25506.2.75.19.4.2not-accessiblecurrent
hh3cWlanBLEModuleConfigEntry
OBJECT-TYPE
Each entry contains BLE module configuration information.
1.3.6.1.4.1.25506.2.75.19.4.2.1not-accessiblecurrent
hh3cWlanBLEModuleAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.4.2.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanBLEModuleID
OBJECT-TYPE
This object represents the ID of a module.
1.3.6.1.4.1.25506.2.75.19.4.2.1.2Integer32 (1..65535)not-accessiblecurrent
hh3cWlanBLEAdvReportStatus
OBJECT-TYPE
This object represents the enabled or disabled status of BLE advertisement reporting.
1.3.6.1.4.1.25506.2.75.19.4.2.1.3TruthValueread-writecurrent
hh3cWlanBLEAdvReportInterval
OBJECT-TYPE
This object represents the interval at which a BLE module sends advertisement packets.
1.3.6.1.4.1.25506.2.75.19.4.2.1.4Integer32 (50..1000)read-writecurrent
hh3cWlanBLEAdvUUID
OBJECT-TYPE
This object represents the UUID of BLE advertisement packets.
1.3.6.1.4.1.25506.2.75.19.4.2.1.5OCTET STRING (SIZE(0 | 32))read-writecurrent
hh3cWlanBLEAdvMajorID
OBJECT-TYPE
This object represents the major ID of BLE advertisement packets.
1.3.6.1.4.1.25506.2.75.19.4.2.1.6Integer32 (0..65535)read-writecurrent
hh3cWlanBLEAdvMinorID
OBJECT-TYPE
This object represents the minor ID of BLE advertisement packets.
1.3.6.1.4.1.25506.2.75.19.4.2.1.7Integer32 (0..65535)read-writecurrent
hh3cWlanAEConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.5
hh3cWlanAEConfigTable
OBJECT-TYPE
Administrators must configure AeroScout (AE) parameters.
1.3.6.1.4.1.25506.2.75.19.5.1not-accessiblecurrent
hh3cWlanAEConfigEntry
OBJECT-TYPE
Each entry contains AE location configuration information.
1.3.6.1.4.1.25506.2.75.19.5.1.1not-accessiblecurrent
hh3cWlanAEAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.5.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanAEStatus
OBJECT-TYPE
This object represents the enabled or disabled status of AE location.
1.3.6.1.4.1.25506.2.75.19.5.1.1.2TruthValueread-writecurrent
hh3cWlanAEEngineAddr
OBJECT-TYPE
This object represents the server's IPv4 address to which AE messages are sent.
1.3.6.1.4.1.25506.2.75.19.5.1.1.3IpAddressread-writecurrent
hh3cWlanAEEnginePort
OBJECT-TYPE
This object represents the UDP port of the location server.
1.3.6.1.4.1.25506.2.75.19.5.1.1.4Integer32 (0..65535)read-writecurrent
hh3cWlanAEVendorPort
OBJECT-TYPE
This object represents the UDP port to listen for AE messages from the server.
1.3.6.1.4.1.25506.2.75.19.5.1.1.5Integer32 (1..65535)read-writecurrent
hh3cWlanAETimeStamp
OBJECT-TYPE
This object represents the enabled or disabled status of timestamp.
1.3.6.1.4.1.25506.2.75.19.5.1.1.6INTEGER {absolute(1), relative(2)}read-writecurrent
hh3cWlanAEVersion
OBJECT-TYPE
This object represents the version of the AE protocol.
1.3.6.1.4.1.25506.2.75.19.5.1.1.7INTEGER {v2(2), v3(3)}read-writecurrent
hh3cWlanAETagMultiAddr
OBJECT-TYPE
This object represents Tag's multicast MAC address.
1.3.6.1.4.1.25506.2.75.19.5.1.1.8MacAddressread-writecurrent
hh3cWlanAEEngineDetection
OBJECT-TYPE
This object represents the location mode.
1.3.6.1.4.1.25506.2.75.19.5.1.1.9INTEGER {static(1), dynamic(2)}read-writecurrent
hh3cWlanAEReportMode
OBJECT-TYPE
This object represents the report mode.
1.3.6.1.4.1.25506.2.75.19.5.1.1.10INTEGER {local(1), central(2)}read-writecurrent
hh3cWlanAERadioConfigTable
OBJECT-TYPE
Administrators must configure AE parameters.
1.3.6.1.4.1.25506.2.75.19.5.2not-accessiblecurrent
hh3cWlanAERadioConfigEntry
OBJECT-TYPE
Each entry contains AE location configuration information.
1.3.6.1.4.1.25506.2.75.19.5.2.1not-accessiblecurrent
hh3cWlanAERadioAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.5.2.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanAEAPRadioID
OBJECT-TYPE
This object represents the ID of a radio.
1.3.6.1.4.1.25506.2.75.19.5.2.1.2Integer32 (1..65535)not-accessiblecurrent
hh3cWlanAERadioStatus
OBJECT-TYPE
This object represents the enabled or disabled status of radio-based location.
1.3.6.1.4.1.25506.2.75.19.5.2.1.3TruthValueread-writecurrent
hh3cWlanAEMUStatus
OBJECT-TYPE
This object represents the status of MU message reporting.
1.3.6.1.4.1.25506.2.75.19.5.2.1.4TruthValueread-writecurrent
hh3cWlanAETagStatus
OBJECT-TYPE
This object represents the status of Tag message reporting.
1.3.6.1.4.1.25506.2.75.19.5.2.1.5TruthValueread-writecurrent
hh3cWlanCommonConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.6
hh3cWlanCommonConfigTable
OBJECT-TYPE
Administrators must configure common parameters.
1.3.6.1.4.1.25506.2.75.19.6.1not-accessiblecurrent
hh3cWlanCommonConfigEntry
OBJECT-TYPE
Each entry contains common configuration information.
1.3.6.1.4.1.25506.2.75.19.6.1.1not-accessiblecurrent
hh3cWlanCommonAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.6.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanDilutionStatus
OBJECT-TYPE
This object represents the enabled or disabled status of packet dilution.
1.3.6.1.4.1.25506.2.75.19.6.1.1.2TruthValueread-writecurrent
hh3cWlanDilutionFactor
OBJECT-TYPE
This object represents the packet dilution factor.
1.3.6.1.4.1.25506.2.75.19.6.1.1.3Integer32 (0..10000)read-writecurrent
hh3cWlanDilutionTimeout
OBJECT-TYPE
This object represents the packet dilution timeout.
1.3.6.1.4.1.25506.2.75.19.6.1.1.4Integer32 (0..60)read-writecurrent
hh3cWlanIgnoreBeacon
OBJECT-TYPE
This object represents the enabled or disabled status of beacon ignoring.
1.3.6.1.4.1.25506.2.75.19.6.1.1.5TruthValueread-writecurrent
hh3cWlanRateLimitStatus
OBJECT-TYPE
This object represents the enabled or disabled status of location packet rate limiting.
1.3.6.1.4.1.25506.2.75.19.6.1.1.6TruthValueread-writecurrent
hh3cWlanRateLimitCir
OBJECT-TYPE
This object represents the CIR for sending location packets.
1.3.6.1.4.1.25506.2.75.19.6.1.1.7Integer32 (0 | 8..1300000)read-writecurrent
hh3cWlanRateLimitCbs
OBJECT-TYPE
This object represents the CBS for sending location packets.
1.3.6.1.4.1.25506.2.75.19.6.1.1.8Integer32 (0 | 500..130000000)read-writecurrent
hh3cWlanClientRateLimitStatus
OBJECT-TYPE
This object represents the enabled or disabled status of client packet rate limiting.
1.3.6.1.4.1.25506.2.75.19.6.1.1.9TruthValueread-writecurrent
hh3cWlanClientRateLimitCir
OBJECT-TYPE
This object represents the CIR for receiving client packets.
1.3.6.1.4.1.25506.2.75.19.6.1.1.10Integer32 (0..1300000)read-writecurrent
hh3cWlanClientRateLimitCbs
OBJECT-TYPE
This object represents the CBS for receiving client packets.
1.3.6.1.4.1.25506.2.75.19.6.1.1.11Integer32 (0 | 80..130000000)read-writecurrent
hh3cWlanRssiStatus
OBJECT-TYPE
This object represents the enabled or disabled status of RSSI-based packet filtering.
1.3.6.1.4.1.25506.2.75.19.6.1.1.12TruthValueread-writecurrent
hh3cWlanRssiThreshold
OBJECT-TYPE
This object represents the max RSSI value of clients' packets.
1.3.6.1.4.1.25506.2.75.19.6.1.1.13Integer32 (5..100)read-writecurrent
hh3cWlanIgnoreApFrame
OBJECT-TYPE
This object represents the enabled or disabled status of AP packet ignoring.
1.3.6.1.4.1.25506.2.75.19.6.1.1.14TruthValueread-writecurrent
hh3cWlanCUPIDConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.7
hh3cWlanCUPIDConfigTable
OBJECT-TYPE
Administrators must configure CUPID parameters.
1.3.6.1.4.1.25506.2.75.19.7.1not-accessiblecurrent
hh3cWlanCUPIDConfigEntry
OBJECT-TYPE
Each entry contains CUPID location configuration information.
1.3.6.1.4.1.25506.2.75.19.7.1.1not-accessiblecurrent
hh3cWlanCupidAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.7.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanCupidStatus
OBJECT-TYPE
This object represents the status of CUPID location.
1.3.6.1.4.1.25506.2.75.19.7.1.1.2TruthValueread-writecurrent
hh3cWlanCupidEngineAddr
OBJECT-TYPE
This object represents the IPv4 address of the CUPID location server.
1.3.6.1.4.1.25506.2.75.19.7.1.1.3IpAddressread-writecurrent
hh3cWlanCupidEnginePort
OBJECT-TYPE
This object represents the UDP port of the CUPID location server.
1.3.6.1.4.1.25506.2.75.19.7.1.1.4Integer32 (0..65535)read-writecurrent
hh3cWlanCupidVendorPort
OBJECT-TYPE
This object represents the UDP port to listen for CUPID messages from the server.
1.3.6.1.4.1.25506.2.75.19.7.1.1.5Integer32 (1..65535)read-writecurrent
hh3cWlanCupidReportStatus
OBJECT-TYPE
This object represents the status of CUPID location reporting.
1.3.6.1.4.1.25506.2.75.19.7.1.1.6TruthValueread-writecurrent
hh3cWlanCupidReportInterval
OBJECT-TYPE
This object represents the interval for sending CUPID location packets.
1.3.6.1.4.1.25506.2.75.19.7.1.1.7Integer32 (1..10)read-writecurrent
hh3cWlanCupidUnassSta
OBJECT-TYPE
This object represents the status of unassociated client information reporting for CUPID location.
1.3.6.1.4.1.25506.2.75.19.7.1.1.8TruthValueread-writecurrent
hh3cWlanCupidUnassMeasureSta
OBJECT-TYPE
This object represents the status of CUPID location for unassociated clients.
1.3.6.1.4.1.25506.2.75.19.7.1.1.9TruthValueread-writecurrent
hh3cWlanCupidReportMode
OBJECT-TYPE
This object represents the report mode.
1.3.6.1.4.1.25506.2.75.19.7.1.1.10INTEGER {local(1), central(2)}read-writecurrent
hh3cWlanCUPIDReportFormat
OBJECT-TYPE
This object represents the report format.
1.3.6.1.4.1.25506.2.75.19.7.1.1.11INTEGER {general(1), lightweight(2)}read-writecurrent
hh3cWlanFPConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.19.8
hh3cWlanFPConfigTable
OBJECT-TYPE
Administrators must configure RF fingerprinting parameters.
1.3.6.1.4.1.25506.2.75.19.8.1not-accessiblecurrent
hh3cWlanFPConfigEntry
OBJECT-TYPE
Each entry contains RF fingerprinting configuration information.
1.3.6.1.4.1.25506.2.75.19.8.1.1not-accessiblecurrent
hh3cWlanFPAPSerialID
OBJECT-TYPE
This object represents the serial ID of an AP.
1.3.6.1.4.1.25506.2.75.19.8.1.1.1OCTET STRING (SIZE(0..127))not-accessiblecurrent
hh3cWlanFPStatus
OBJECT-TYPE
This object represents the enabled or disabled status of RF fingerprinting.
1.3.6.1.4.1.25506.2.75.19.8.1.1.2TruthValueread-writecurrent
hh3cWlanFPEngineAddr
OBJECT-TYPE
This object represents the IPv4 address of the RF fingerprinting server.
1.3.6.1.4.1.25506.2.75.19.8.1.1.3IpAddressread-writecurrent
hh3cWlanFPEnginePort
OBJECT-TYPE
This object represents the UDP port of the RF fingerprinting server.
1.3.6.1.4.1.25506.2.75.19.8.1.1.4Integer32 (0..65535)read-writecurrent
hh3cWlanFPVendorPort
OBJECT-TYPE
This object represents the UDP port to listen for RF fingerprinting packets from the server.
1.3.6.1.4.1.25506.2.75.19.8.1.1.5Integer32 (1..65535)read-writecurrent
hh3cWlanFPRawFrameReport
OBJECT-TYPE
This object represents the status of raw frame reporting for RF fingerprinting.
1.3.6.1.4.1.25506.2.75.19.8.1.1.6TruthValueread-writecurrent
hh3cWlanFPMUReport
OBJECT-TYPE
This object represents the status of MU information reporting for RF fingerprinting.
1.3.6.1.4.1.25506.2.75.19.8.1.1.7TruthValueread-writecurrent
hh3cWlanFPReportMode
OBJECT-TYPE
This object represents the report mode.
1.3.6.1.4.1.25506.2.75.19.8.1.1.8INTEGER {local(1), central(2)}read-writecurrent
hh3cWlanFPReportFormat
OBJECT-TYPE
This object represents the report format.
1.3.6.1.4.1.25506.2.75.19.8.1.1.9INTEGER {general(1), lightweight(2), cupidhybrid(3)}read-writecurrent
hh3cWlanFPTagMultiAddr
OBJECT-TYPE
This object represents Tag's multicast MAC address.
1.3.6.1.4.1.25506.2.75.19.8.1.1.10MacAddressread-writecurrent

Notifications

NameOIDStatus
hh3cWlanModuleInsertTrap
NOTIFICATION-TYPE
This notification will be generated when an IOT module is inserted.
1.3.6.1.4.1.25506.2.75.19.3.0.1current
hh3cWlanModuleRomveTrap
NOTIFICATION-TYPE
This notification will be generated when an IOT module is removed.
1.3.6.1.4.1.25506.2.75.19.3.0.2current
hh3cWlanModuleMissMatch
NOTIFICATION-TYPE
This notification will be generated when the configured type doesn't match the module type.
1.3.6.1.4.1.25506.2.75.19.3.0.3current